Showing 1–50 of 67 results for author: Varela, M

Modulating the magnetic properties of Fe3C/C encapsulated core/shell nanoparticles for potential prospects in biomedicine

Authors: A. Castellano-Soria, R. Lopez-Mendez, A. Espinosa, C. Granados-Miralles, M. Varela, P. Marin, E. Navarro, J. Lopez-Sanchez

Abstract: In the pursuit of alternative and less invasive medical treatments, magnetic nanoparticles (NPs) have gained significant relevance. Iron carbides NPs stand out for their higher saturation magnetizations compared to iron oxides, while maintaining a suitable biocompatibility. In this work, high control is achieved over the composition and morphology of Fe3C/C encapsulated core/shell nanoparticles th… ▽ More In the pursuit of alternative and less invasive medical treatments, magnetic nanoparticles (NPs) have gained significant relevance. Iron carbides NPs stand out for their higher saturation magnetizations compared to iron oxides, while maintaining a suitable biocompatibility. In this work, high control is achieved over the composition and morphology of Fe3C/C encapsulated core/shell nanoparticles through fine-tuning of the sol-gel synthesis parameters. Specifically, the impact of decreasing each surfactant concentration added, nt, the same both for oleylamine (ON) and oleic acid (OA), has been explored. A minimum value for such parameter denoted by nt,min. was required to produce pure Fe3C@C NP-composites. For nt < 4 mmol, some minor α-Fe impurities arise, and the effective carburization becomes unstable due to insufficient carbon. The magnetic properties of the materials prepared were optimized by reducing the excess carbon from surfactants, resulting in saturation magnetization values of 86 emu/g. (for pure Fe3C at nt = 5 mmol) and 102 emu/g (for Fe3C and <2 % w.t. of α-Fe impurity at nt = 4 mmol). In view of this, several cytotoxicity studies for different Fe3C@C samples were conducted, exhibiting excellent biocompatibility in cell-based assays, which could lead to potential application at the forefront of biomedical fields. △ Less

Submitted 1 October, 2024; originally announced October 2024.

High stability 2D electron gases formed in Si3N4/Al//KTaO3 heterostructures: synthesis and in-depth interfacial characterization

Authors: E. A. Martínez, A. M. Lucero, E. D. Cantero, N. Biškup, A. Orte, E. A. Sánchez, M. Romera, N. M. Nemes, J. L. Martínez, M. Varela, O. Grizzi, F. Y. Bruno

Abstract: The two-dimensional electron gas (2DEG) found in KTaO3-based interfaces has garnered attention due to its remarkable electronic properties. In this study, we investigated the conducting system embedded at the Si3N4/Al//KTO(110) heterostructure. We demonstrate that the Al/KTO interface supports a conducting system, with the Si3N4 passivation layer acting as a barrier to oxygen diffusion, enabling e… ▽ More The two-dimensional electron gas (2DEG) found in KTaO3-based interfaces has garnered attention due to its remarkable electronic properties. In this study, we investigated the conducting system embedded at the Si3N4/Al//KTO(110) heterostructure. We demonstrate that the Al/KTO interface supports a conducting system, with the Si3N4 passivation layer acting as a barrier to oxygen diffusion, enabling ex-situ characterization. Our findings reveal that the mobility and carrier density of the system can be tuned by varying the Al layer thickness. Using scanning transmission electron microscopy, electron energy-loss spectroscopy, X-ray photoemission spectroscopy, and time-of-flight secondary ion mass spectrometry, we characterized the structural and chemical composition of the interface. We found that the Al layer fully oxidizes into AlOx, drawing oxygen from the KTaO3 substrate. The oxygen depletion zone extends 3-5 nm into the substrate and correlates to the Al thickness. Heterostructures with thicker Al layers exhibit higher carrier densities but lower mobilities, likely due to interactions with the oxygen vacancies that act as scattering centers. These findings highlight the importance of considering the effect and extent of the oxygen depletion zone when designing and modeling two-dimensional electron systems in complex oxides. △ Less

Submitted 18 September, 2024; originally announced September 2024.

Journal ref: Applied Surface Science, 689, 162499 (2025)

Structural and optical properties of self-assembled AlN nanowires grown on SiO2/Si substrates by molecular beam epitaxy

Authors: Ž. Gačević, J. Grandal, Q. Guo, R. Kirste, M. Varela, Z. Sitar, M. A. Sánchez García

Abstract: Self assembled AlN nanowires (NWs) are grown by plasma assisted molecular beam epitaxy (PAMBE) on SiO2 / Si (111) substrates. Using a combination of in-situ reflective high energy electron diffraction and ex situ X ray diffraction (XRD), we show that the NWs grow nearly strain free, preferentially perpendicular to the amorphous SiO2 interlayer and without epitaxial relationship to Si(111) substrat… ▽ More Self assembled AlN nanowires (NWs) are grown by plasma assisted molecular beam epitaxy (PAMBE) on SiO2 / Si (111) substrates. Using a combination of in-situ reflective high energy electron diffraction and ex situ X ray diffraction (XRD), we show that the NWs grow nearly strain free, preferentially perpendicular to the amorphous SiO2 interlayer and without epitaxial relationship to Si(111) substrate, as expected. Scanning electron microscopy investigation reveals significant NWs coalescence, which results in their progressively increasing diameter and formation of columnar structures with non hexagonal cross section. Making use of scanning transmission electron microscopy (STEM), the NWs initial diameters are found in the 20 to 30 nm range. In addition, the formation of a thin (30 nm) polycrystalline AlN layer is observed on the substrate surface. Regarding the structural quality of the AlN NWs, STEM measurements reveal the formation of extended columnar regions, which grow with a virtually perfect metal-polarity wurtzite arrangement and with extended defects only sporadically observed. Combination of STEM and electron energy loss spectroscopy (EELS) reveals the formation of continuous aluminum oxide (1 to 2 nm) on the NW surface. Low temperature photoluminescence measurements reveal a single near band edge (NBE) emission peak, positioned at 6.03 eV (at 2 K), a value consistent with nearly zero NW strain evidenced by XRD and in agreement with the values obtained on AlN bulk layers synthesized by other growth techniques. The significant full width at half maximum of NBE emission, found at 20 meV (at 2 K), suggests that free and bound excitons are mixed together within this single emission band. △ Less

Submitted 31 January, 2024; originally announced February 2024.

Comments: 9 pages, 5 figures

Journal ref: Nanotechnology 32 (2021) 195601

Charge delocalization and hyperpolarizability in ionic liquids

Authors: C. D. Rodriguez-Fernandez L. M. Varela, C. Schroder, E. Lopez Lago

Abstract: In this work the role that charge delocalization plays in the non-linear optical response of ionic liquids is evaluated. The first hyperpolarizability for the non-linear process of second harmonic generation (SHG) and second hyperpolarizability for the non-linear process of electro-optical Kerr-Effect (EOKE) of a large number of ionic liquid forming ions were estimated by means of density function… ▽ More In this work the role that charge delocalization plays in the non-linear optical response of ionic liquids is evaluated. The first hyperpolarizability for the non-linear process of second harmonic generation (SHG) and second hyperpolarizability for the non-linear process of electro-optical Kerr-Effect (EOKE) of a large number of ionic liquid forming ions were estimated by means of density functional theory calculations. The results point to that both charge delocalization and molecular geometry are the key features that govern their hyperpolarizabilities. Our findings show that some of the most commonly used anions in ionic liquids are expected to present strong non-linear responses while common cations present a much more limited performance. However, this limitation can be overcome by a proper tailoring of cations to present charge delocalization over large molecular regions. The hypothesis of additivity of hyperpolarizabilities in ionic liquids is tested and exploited to obtain a map of second and third order non-linear susceptibilities of 1496 ion combinations. This map is intended to be a guide for future works on the hyperpolarizability of ILs △ Less

Submitted 29 January, 2024; originally announced January 2024.

Comments: 12 pages, 6 figures, 4 tables, supplementary data associated with this article can be found, in the online version, at https://doi.org/10.1016/j.molliq.2021.118153

Journal ref: Journal of Molecular Liquids 349 (2022) 118153

Modeling the Temperature-Dependent Material Dispersion of Imidazolium-Based Ionic Liquids in the VIS-NIR

Authors: Y. Arosa, B. S. Algnamat, Rodriguez Fernandez C. D., E. Lopez Lago, L. M. Varela, R. de la Fuente

Abstract: A thorough analysis of the refractive index of eleven 1-alkyl-3-methylimidazolium-based ionic liquids with three different anions, tetrafluoroborate bis(trifluoromethylsulfonyl)imide, and trifluoromethanesulfonate, is reported. Refractive indices were estimated, in the temperature interval from 298.15 to 323.15 K, using an Abbe refractometer to determine the value at the sodium D line and white li… ▽ More A thorough analysis of the refractive index of eleven 1-alkyl-3-methylimidazolium-based ionic liquids with three different anions, tetrafluoroborate bis(trifluoromethylsulfonyl)imide, and trifluoromethanesulfonate, is reported. Refractive indices were estimated, in the temperature interval from 298.15 to 323.15 K, using an Abbe refractometer to determine the value at the sodium D line and white light spectral interferometry to obtain dispersion in the range of wavelengths from 400 to 1000 nm. The first part of the manuscript is focused on the dependence of refractive index with wavelength, temperature, cation alkyl chain length, and anion nature. Once the main features are detailed, and in order to explain the experimental trends, a model for the refractive index is considered where its square is expressed by a single resonance Sellmeier dispersion formula. This formula has two coefficients: the first one identifies the position of the resonance in the spectral axis, and the second one specifies its strength. It was found that, for a given compound, the resonances position is independent of temperature, while the strength varies linearly with it. This model reproduces successfully the experimental data within the refractive index uncertainty. Furthermore, the model allows calculating the thermo-optic coefficient and its wavelength dependence. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Comments: Accepted version, 28 pages, 9 figures, 1 table, the Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acs.jpcc.8b08971

Journal ref: Journal of Physical Chemistry C 122 (2018) 29470-29478

Non-additive electronic polarizabilities of ionic liquids: Charge delocalization effects

Authors: C. D. Rodriguez-Fernandez, E. Lopez Lago, C. Schroder, L. M. Varela

Abstract: Electronic charge delocalization on the molecular backbones of ionic liquid-forming ions substantially impacts their molecular polarizabilities. Density functional theory calculations of polarizabilities and volumes of many cations and anions are reported and applied to yield refractive indices of 1216 ionic liquids. A novel expression for the precise estimation of the molecular volumes of the ion… ▽ More Electronic charge delocalization on the molecular backbones of ionic liquid-forming ions substantially impacts their molecular polarizabilities. Density functional theory calculations of polarizabilities and volumes of many cations and anions are reported and applied to yield refractive indices of 1216 ionic liquids. A novel expression for the precise estimation of the molecular volumes of the ionic liquids from simulation data is also introduced, adding quadratic corrections to the usual sum of atomic volumes. Our significant findings include i) that the usual assumption of uniform, additive atomic polarizabilities is challenged when highly mobile electrons in conjugated systems are present, and ii) that cations with conjugated large carbon chains can be used together with anions for the design of ionic liquids with very high refractive indices. A novel relation for the polarizability volume is reported together with a refractive index map made up of the studied ionic liquids △ Less

Submitted 29 January, 2024; originally announced January 2024.

Comments: 12 pages, 7 figures, 6 tables, Supplementary data associated with this article can be found, in the online version, at https://doi.org/10.1016/j.molliq.2021. 117099

Journal ref: Journal of Molecular Liquids 346 (2022) 117099

Novel one-pot sol-gel synthesis route of Fe3C/few-layered graphene core/shell nanoparticles embedded in a carbon matrix

Authors: Alberto Castellano-Soria, Jesús López-Sánchez, Cecilia Granados-Miralles, María Varela, Elena Navarro, César González, Pilar Marín

Abstract: Fe3C/few-layered graphene core/shell nanoparticles embedded in a carbon matrix are synthesized by a novel two-step surfactant sol-gel strategy, where the processes of hydrolysis, polycondensation and drying take place in a one-pot. The present approach is based on the combined action of oleic acid and oleylamine, which act sterically on the precursor micelles when a densification temperature is pe… ▽ More Fe3C/few-layered graphene core/shell nanoparticles embedded in a carbon matrix are synthesized by a novel two-step surfactant sol-gel strategy, where the processes of hydrolysis, polycondensation and drying take place in a one-pot. The present approach is based on the combined action of oleic acid and oleylamine, which act sterically on the precursor micelles when a densification temperature is performed in a reducing atmosphere. The structural and magnetic evolution of the formed compounds is investigated, ranging from iron oxides such as Fe3O4 and FeO, to the formation of pure Fe3C/C samples from 700 °C onwards. Interestingly, Fe3C nanoparticles with a size of ~20 nm crystallize immersed in the carbon matrix and the surrounding environment forms an oriented encapsulation built by few-layered graphene. The nanostructures show a saturation magnetization of ~43 emu/g and a moderate coercivity of ~500 Oe. Thereby, an innovative chemical route to produce single phase Fe3C nanoparticles is described, and an effective method of few-layered graphene passivation is proposed, yielding a product with a high magnetic response and high chemical stability against environmental corrosion. △ Less

Submitted 24 September, 2023; originally announced September 2023.

Journal ref: J. Alloys Compd. 902 (2022) 163662

Electronic structure of the highly conductive perovskite oxide SrMoO$_3$

Authors: E. Cappelli, A. Hampel, A. Chikina, E. Bonini Guedes, G. Gatti, A. Hunter, J. Issing, N. Biskup, M. Varela, Cyrus E. Dreyer, A. Tamai, A. Georges, F. Y. Bruno, M. Radovic, F. Baumberger

Abstract: We use angle-resolved photoemission to map the Fermi surface and quasiparticle dispersion of bulk-like thin films of SrMoO$_3$ grown by pulsed laser deposition. The electronic self-energy deduced from our data reveals weak to moderate correlations in SrMoO$_3$, consistent with our observation of well-defined electronic states over the entire occupied band width. We further introduce spectral funct… ▽ More We use angle-resolved photoemission to map the Fermi surface and quasiparticle dispersion of bulk-like thin films of SrMoO$_3$ grown by pulsed laser deposition. The electronic self-energy deduced from our data reveals weak to moderate correlations in SrMoO$_3$, consistent with our observation of well-defined electronic states over the entire occupied band width. We further introduce spectral function calculations that combine dynamical mean-field theory with an unfolding procedure of density functional calculations and demonstrate good agreement of this approach with our experiments. △ Less

Submitted 11 March, 2022; originally announced March 2022.

Towards Non-Volatile Spin Orbit Devices: Deposition of Ferroelectric Hafnia on Monolayer Graphene/Co/HM Stacks

Authors: Suzanne Lancaster, Iciar Arnay, Ruben Guerrero, Adrian Gudín, Alejandra Guedeja-Marrón, Jose Manuel Diez Toledano, Jan Gärtner, Alberto Anadón, Maria Varela, Julio Camarero, Thomas Mikolajick, Paolo Perna, Stefan Slesazeck

Abstract: Although technologically challenging, the integration of ferroelectric thin films with graphene spintronics potentially allows the realization of highly efficient, electrically tuneable, non-volatile memories. Here, the atomic layer deposition (ALD) of ferroelectric Hf$_{0.5}$Zr$_{0.5}$O$_2$ (HZO) directly on graphene (Gr)/Co/heavy metal (HM) epitaxial stacks is investigated via the implementation… ▽ More Although technologically challenging, the integration of ferroelectric thin films with graphene spintronics potentially allows the realization of highly efficient, electrically tuneable, non-volatile memories. Here, the atomic layer deposition (ALD) of ferroelectric Hf$_{0.5}$Zr$_{0.5}$O$_2$ (HZO) directly on graphene (Gr)/Co/heavy metal (HM) epitaxial stacks is investigated via the implementation of several nucleation methods. With an in-situ method employing an Al$_2$O$_3$ layer, the HZO demonstrates a remanent polarization (2Pr) of 19.2 $μC/cm^2$. An ex-situ, naturally oxidized sputtered Ta layer for nucleation produces a film with 2Pr of 10.81 $μC/cm^2$, but a lower coercive field over the stack and switching enduring over subsequent cycles. Magnetic hysteresis measurements taken before and after ALD deposition show strong perpendicular magnetic anisotropy (PMA), with only slight deviations in the magnetic coercive fields due to the HZO deposition process, thus pointing to a good preservation of the single-layer Gr. X-ray diffraction measurements further confirm that the high-quality interfaces demonstrated in the stack remain unperturbed by the ferroelectric deposition and anneal. △ Less

Submitted 23 March, 2023; v1 submitted 20 September, 2021; originally announced September 2021.

Comments: Accepted at ACS Applied Materials & Interfaces

Critical Effect of Bottom Electrode on Ferroelectricity of Epitaxial Hf0.5Zr0.5O2 Thin Films

Authors: Saul Estandia, Jaume Gazquez, Maria Varela, Nico Dix, Mengdi Qian, Raul Solanas, Ignasi Fina, Florencio Sanchez

Abstract: Epitaxial orthorhombic Hf0.5Zr0.5O2 (HZO) films on La0.67Sr0.33MnO3 (LSMO) electrodes show robust ferroelectricity, with high polarization, endurance and retention. However, no similar results have been achieved using other perovskite electrodes so far. Here, LSMO and other perovskite electrodes are compared. A small amount of orthorhombic phase and low polarization is found in HZO films grown on… ▽ More Epitaxial orthorhombic Hf0.5Zr0.5O2 (HZO) films on La0.67Sr0.33MnO3 (LSMO) electrodes show robust ferroelectricity, with high polarization, endurance and retention. However, no similar results have been achieved using other perovskite electrodes so far. Here, LSMO and other perovskite electrodes are compared. A small amount of orthorhombic phase and low polarization is found in HZO films grown on La-doped BaSnO3 and Nb-doped SrTiO3, while null amounts of orthorhombic phase and polarization are detected in films on LaNiO3 and SrRuO3. The critical effect of the electrode on the stabilized phases is not consequence of differences in the electrode lattice parameter. The interface is critical, and engineering the HZO bottom interface on just a few monolayers of LSMO permits the stabilization of the orthorhombic phase. Furthermore, while the specific divalent ion (Sr or Ca) in the manganite is not relevant, reducing the La content causes a severe reduction of the amount of orthorhombic phase and the ferroelectric polarization in the HZO film. △ Less

Submitted 18 February, 2021; originally announced February 2021.

Comments: Open access, published (2021) in Journal of Materials Chemistry C

Origin of the Large Perpendicular Magnetic Anisotropy in Nanometer-thick Epitaxial Graphene/Co/Heavy Metal Heterostructures

Authors: M. Blanco-Rey, P. Perna, A. Gudin, J. M. Diez, A. Anadon Leticia de Melo Costa, Manuel Valvidares, Pierluigi Gargiani, Alejandra Guedeja-Marron, Mariona Cabero, M. Varela, C. Garcia-Fernandez, M. M. Otrokov, J. Camarero, R. Miranda, A. Arnau, J. I. Cerda

Abstract: A combination of theoretical modelling and experiments reveals the origin of the large perpendicular magnetic anisotropy (PMA) that appears in nanometer-thick epitaxial Co films intercalated between graphene (Gr) and a heavy metal (HM) substrate, as a function of the Co thickness. High quality epitaxial Gr/Co\n/HM(111) (HM=Pt,Ir) heterostructures are grown by intercalation below graphene, which ac… ▽ More A combination of theoretical modelling and experiments reveals the origin of the large perpendicular magnetic anisotropy (PMA) that appears in nanometer-thick epitaxial Co films intercalated between graphene (Gr) and a heavy metal (HM) substrate, as a function of the Co thickness. High quality epitaxial Gr/Co\n/HM(111) (HM=Pt,Ir) heterostructures are grown by intercalation below graphene, which acts as a surfactant that kinetically stabilizes the pseudomorphic growth of highly perfect Co face-centered tetragonal ($fct$) films, with a reduced number of stacking faults as the only structural defect observable by high resolution scanning transmission electron microscopy (HR-STEM). Magneto-optic Kerr effect (MOKE) measurements show that such heterostructures present PMA up to large Co critical thicknesses of about 4~nm (20~ML) and 2~nm (10~ML) for Pt and Ir substrates, respectively, while X-ray magnetic circular dichroism (XMCD) measurements show an inverse power law of the anistropy of the orbital moment with Co thickness, reflecting its interfacial nature, that changes sign at about the same critical values. First principles calculations show that, regardless of the presence of graphene, ideal Co $fct$ films on HM buffers do not sustain PMAs beyond around 6~MLs due to the in-plane contribution of the inner bulk-like Co layers. The large experimental critical thicknesses sustaining PMA can only be retrieved by the inclusion of structural defects that promote a local $hcp$ stacking such as twin boundaries or stacking faults. Remarkably, a layer resolved analysis of the orbital momentum anisotropy reproduces its interfacial nature, and reveals that the Gr/Co interface contribution is comparable to that of the Co/Pt(Ir). △ Less

Submitted 11 December, 2020; originally announced December 2020.

Comments: 25 pages, 4 figures, 1 table

Probing the Meta-Stability of Oxide Core/Shell Nanoparticle Systems at Atomic Resolution

Authors: Manuel A. Roldana, Arnaud Mayence, Alberto López-Ortega, Ryo Ishikawa, Juan Salafranca, Marta Estrader, German Salazar-Alvarez, M. Dolors Baró, Josep Nogués, Stephen J. Pennycook, Maria Varelaa

Abstract: Hybrid nanoparticles allow exploiting the interplay of confinement, proximity between different materials and interfacial effects. However, to harness their properties an in-depth understanding of their (meta)stability and interfacial characteristics is crucial. This is especially the case of nanosystems based on functional oxides working under reducing conditions, which may severely impact their… ▽ More Hybrid nanoparticles allow exploiting the interplay of confinement, proximity between different materials and interfacial effects. However, to harness their properties an in-depth understanding of their (meta)stability and interfacial characteristics is crucial. This is especially the case of nanosystems based on functional oxides working under reducing conditions, which may severely impact their properties. In this work, the in-situ electron-induced selective reduction of Mn3O4 to MnO is studied in magnetic Fe3O4/Mn3O4 and Mn3O4/Fe3O4 core/shell nanoparticles by means of high-resolution scanning transmission electron microscopy combined with electron energy-loss spectroscopy. Such in-situ transformation allows mimicking the actual processes in operando environments. A multi-stage image analysis using geometric phase analysis combined with particle image velocity enables direct monitoring of the relationship between structure, chemical composition and strain relaxation during the Mn3O4 reduction. In the case of Fe3O4/Mn3O4 core/shell the transformation occurs smoothly without the formation of defects. However, for the inverse Mn3O4/Fe3O4 core/shell configuration the electron beam-induced transformation occurs in different stages that include redox reactions and void formation followed by strain field relaxation via formation of defects. This study highlights the relevance of understanding the local dynamics responsible for changes in the particle composition in order to control stability and, ultimately, macroscopic functionality. △ Less

Submitted 17 September, 2020; originally announced September 2020.

Journal ref: Chemical Engineering Journal 405 (2021) 1268203

Interfacial-Redox-Induced Tuning of Superconductivity in YBa$_{2}$Cu$_{3}$O$_{7-δ}$

Authors: Peyton D. Murray, Dustin A. Gilbert, Alexander J. Grutter, Brian J. Kirby, David Hernandez-Maldonado, Maria Varela, Zachary E. Brubaker, W. L. N. C. Liyanage, Rajesh V. Chopdekar, Valentin Taufour, Rena J. Zieve, Jason R. Jeffries, Elke Arenholz, Yayoi Takamura, Julie A. Borchers, Kai Liu

Abstract: Solid state ionic approaches for modifying ion distributions in getter/oxide heterostructures offer exciting potentials to control material properties. Here we report a simple, scalable approach allowing for total control of the superconducting transition in optimally doped YBa$_{2}$Cu$_{3}$O$_{7-δ}$ (YBCO) films via a chemically-driven ionic migration mechanism. Using a thin Gd capping layer of u… ▽ More Solid state ionic approaches for modifying ion distributions in getter/oxide heterostructures offer exciting potentials to control material properties. Here we report a simple, scalable approach allowing for total control of the superconducting transition in optimally doped YBa$_{2}$Cu$_{3}$O$_{7-δ}$ (YBCO) films via a chemically-driven ionic migration mechanism. Using a thin Gd capping layer of up to 20 nm deposited onto 100 nm thick epitaxial YBCO films, oxygen is found to leach from deep within the YBCO. Progressive reduction of the superconducting transition is observed, with complete suppression possible for a sufficiently thick Gd layer. These effects arise from the combined impact of redox-driven electron doping and modification of the YBCO microstructure due to oxygen migration and depletion. This work demonstrates an effective ionic control of superconductivity in oxides, an interface induced effect that goes well into the quasi-bulk regime, opening up possibilities for electric field manipulation. △ Less

Submitted 17 November, 2019; originally announced November 2019.

Comments: 26 pages, 5 figures

Journal ref: ACS Applied Materials & Interfaces, 12, 4741-4748 (2020)

Controlling the strength of ferromagnetic order in YBa$_2$Cu$_3$O$_7$/La$_{2/3}$Ca$_{1/3}$MnO$_3$ multilayers

Authors: R. de Andrés Prada, R. Gaina, N. Biškup, M. Varela, J. Stahn, C. Bernhard

Abstract: With dc magnetisation and polarized neutron reflectometry we studied the ferromagnetic response of YBa$_2$Cu$_3$O$_7$/La$_{2/3}$Ca$_{1/3}$MnO$_3$ (YBCO/LCMO) multilayers that are grown with pulsed laser deposition. We found that whereas for certain growth conditions (denoted as A-type) the ferromagnetic moment of the LCMO layer is strongly dependent on the structural details of the YBCO layer on w… ▽ More With dc magnetisation and polarized neutron reflectometry we studied the ferromagnetic response of YBa$_2$Cu$_3$O$_7$/La$_{2/3}$Ca$_{1/3}$MnO$_3$ (YBCO/LCMO) multilayers that are grown with pulsed laser deposition. We found that whereas for certain growth conditions (denoted as A-type) the ferromagnetic moment of the LCMO layer is strongly dependent on the structural details of the YBCO layer on which it is deposited, for others (B-type) the ferromagnetism of LCMO is much more robust. Both kinds of multilayers are of similar structural quality, but electron energy-loss spectroscopy (EELS) studies with a scanning transmission electron microscope reveal an enhanced average Mn oxidation state of +3.5 for the A-type as opposed to the B-type samples for which it is close to the nominal value of +3.33. The related, additional hole doping of the A-type LCMO layers, which likely originates from La and/or Mn vacancies, can explain their fragile ferromagnetic order since it places them close to the boundary of the ferromagnetic order at which even weak perturbations can induce an antiferromagnetic or glassy state. On the other hand, we show that the B-type samples allow one to obtain YBCO/LCMO heterostructures with very thick YBCO layers and, yet, strongly ferromagnetic LCMO layers. △ Less

Submitted 24 September, 2019; originally announced September 2019.

Comments: 11 figures

Journal ref: Phys. Rev. B. 100, 115129 (2019)

Effect of different buffer layers on the quality of InGaN layers grown on Si

Authors: V. J. Gómez, J. Grandal, A. Núñez-Cascajero, F. B. Naranjo, M. Varela, M. A. Sánchez-García, E. Calleja

Abstract: This work studies the effect of four different types of buffer layers on the structural and optical properties of InGaN layers grown on Si(111) substrates and their correlation with electrical characteristics. The vertical electrical conduction of n-InGaN/buffer-layer/p-Si heterostructures, with In composition near 46%, which theoretically produces an alignment of the bands, is analyzed. Droplet e… ▽ More This work studies the effect of four different types of buffer layers on the structural and optical properties of InGaN layers grown on Si(111) substrates and their correlation with electrical characteristics. The vertical electrical conduction of n-InGaN/buffer-layer/p-Si heterostructures, with In composition near 46%, which theoretically produces an alignment of the bands, is analyzed. Droplet elimination by radical-beam irradiation was successfully applied to grow high quality InGaN films on Si substrates for the first time. Among several buffer choices, an AlN buffer layer with a thickness above 24 nm improves the structural and optical quality of the InGaN epilayer while keeping a top to bottom ohmic behavior. These results will allow fabricating double-junction InGaN/Si solar cells without the need of tunnel junctions between the two sub-cells, therefore simplifying the device design. △ Less

Submitted 29 August, 2019; originally announced August 2019.

Journal ref: AIP Advances 8, 105026 (2018)

Factors limiting ferroelectric field-effect doping in complex-oxide heterostructures

Authors: L. Bégon-Lours, V. Rouco, Qiao Qiao, A. Sander, M. A. Roldán, R. Bernard, J. Trastoy, A. Crassous, E. Jacquet, K. Bouzehouane, M. Bibes, J. Santamaría, A. Barthélémy, M. Varela, Javier E. Villegas

Abstract: Ferroelectric field-effect doping has emerged as a powerful approach to manipulate the ground state of correlated oxides, opening the door to a new class of field-effect devices. However, this potential is not fully exploited so far, since the size of the field-effect doping is generally much smaller than expected. Here we study the limiting factors through magneto-transport, scanning transmission… ▽ More Ferroelectric field-effect doping has emerged as a powerful approach to manipulate the ground state of correlated oxides, opening the door to a new class of field-effect devices. However, this potential is not fully exploited so far, since the size of the field-effect doping is generally much smaller than expected. Here we study the limiting factors through magneto-transport, scanning transmission electron and piezo-response force microscopy in ferroelectric/superconductor (YBa2Cu3O7-δ /BiFeO3) heterostructures, a model system showing very strong field-effects. Still, we find that they are limited in the first place by an incomplete ferroelectric switching. This can be explained by the existence of a preferential polarization direction set by the atomic terminations at the interface. More importantly, we also find that the field-effect carrier doping is accompanied by a strong modulation of the carrier mobility. Besides making quantification of field-effects via Hall measurements not straightforward, this finding suggests that ferroelectric poling produces structural changes (e.g. charged defects or structural distortions) in the correlated oxide channel. Those findings have important consequences for the understanding of ferroelectric field-effects and for the strategies to further enhance them. △ Less

Submitted 20 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. Materials 2, 084405 (2018)

Materials Structure, Properties and Dynamics through Scanning Transmission Electron Microscopy

Authors: Stephen J. Pennycook, Changjian Li, Mengsha Li, Chunhua Tang, Eiji Okunishi, Maria Varela, Young-Min Kim, Jae Hyuck Jang

Abstract: Scanning transmission electron microscopy (STEM) has advanced rapidly in the last decade thanks to the ability to correct the major aberrations of the probe forming lens. Now atomic-sized beams are routine, even at accelerating voltages as low as 40 kV, allowing knock-on damage to be minimized in beam sensitive materials. The aberration-corrected probes can contain sufficient current for high qual… ▽ More Scanning transmission electron microscopy (STEM) has advanced rapidly in the last decade thanks to the ability to correct the major aberrations of the probe forming lens. Now atomic-sized beams are routine, even at accelerating voltages as low as 40 kV, allowing knock-on damage to be minimized in beam sensitive materials. The aberration-corrected probes can contain sufficient current for high quality, simultaneous, imaging and analysis in multiple modes. Atomic positions can be mapped with picometer precision, revealing ferroelectric domain structures, composition can be mapped by energy dispersive X-ray spectroscopy (EDX) and electron energy loss spectroscopy (EELS) and charge transfer can be tracked unit cell by unit cell using the EELS fine structure. Furthermore, dynamics of point defects can be investigated through rapid acquisition of multiple image scans. Today STEM has become an indispensable tool for analytical science at the atomic level, providing a whole new level of insights into the complex interplays that control materials properties. △ Less

Submitted 20 August, 2019; originally announced August 2019.

Localization of Yttrium Segregation within YSZ Grain Boundary Dislocation Cores

Authors: G. Sánchez-Santolino, J. Salafranca, S. T. Pantelides, S. J. Pennycook, C. León, M. Varela

Abstract: Ionic conductivity blocking at grain boundaries in polycrystalline electrolytes is one of the main obstacles that need to be overcome in order to improve the performance of solid state fuel cells and batteries. To this aim, harnessing the physical properties of grain boundaries in ionic conducting materials such as yttria stabilized zirconia (YSZ) down to the atomic scale arises as a greatly impor… ▽ More Ionic conductivity blocking at grain boundaries in polycrystalline electrolytes is one of the main obstacles that need to be overcome in order to improve the performance of solid state fuel cells and batteries. To this aim, harnessing the physical properties of grain boundaries in ionic conducting materials such as yttria stabilized zirconia (YSZ) down to the atomic scale arises as a greatly important task. Here we present a structural and compositional analysis of a single grain boundary in a 9 mol% yttria content YSZ bicrystal by means of aberration corrected scanning transmission electron microscopy. Our studies combine strain and compositional atomic resolution analysis with density-functional-theory calculations in order to find a preferential segregation of yttrium to the expansive atomic sites at the grain boundary dislocation cores. These results address a crucial step towards the understanding of the physical properties of grain boundaries down to atomic dimensions. △ Less

Submitted 8 August, 2019; originally announced August 2019.

Comments: 4 figures

Two-dimensional pattern formation in ionic liquids confined between graphene walls

Authors: Hadrián Montes-Campos, José Manuel Otero-Mato, Trinidad Méndez-Morales, Oscar Cabeza, Luis J. Gallego, Alina Ciach, Luis M. Varela

Abstract: We perform molecular dynamics simulations of ionic liquids confined between graphene walls under a large variety of conditions (pure ionic liquids, mixtures with water and alcohols, mixtures with lithium salts and defective graphene walls). Our results show that the formation of striped and hexagonal patterns in the Stern layer can be considered as a general feature of ionic liquids at electrochem… ▽ More We perform molecular dynamics simulations of ionic liquids confined between graphene walls under a large variety of conditions (pure ionic liquids, mixtures with water and alcohols, mixtures with lithium salts and defective graphene walls). Our results show that the formation of striped and hexagonal patterns in the Stern layer can be considered as a general feature of ionic liquids at electrochemical interfaces, the transition between patterns being controlled by the net balance of charge in the innermost layer of adsorbed molecules. This explains previously reported experimental and computational results and, for the first time, why these pattern changes are triggered by any perturbation of the charge density at the innermost layer of the electric double layer (voltage and composition changes, and vacancies at the electrode walls, among others), which may help tuning electrode-ionic liquid interfaces. Using Monte Carlo simulations we show that such structures can be reproduced by a simple two-dimensional lattice model with only nearest-neighbour interactions, governed by highly screened ionic interactions and short-range and excluded volume interactions. We also show that the results of our simulations are consistent with those inferred from the Landau-Brazovskii theory of pattern formation in self-assembling systems. The presence of these patterns at the ionic liquid graphene-electrode interfaces may have a strong impact on the process of ionic transfer from the bulk mixtures to the electrodes, on the differential capacitance of the electrode-electrolyte double layer or on the rates of redox reactions at the electrodes, among other physicochemical properties, and is therefore an effect of great technological interest. △ Less

Submitted 13 February, 2019; originally announced February 2019.

Comments: 8 pages, 5 figures, Physical Chemistry Chemical Physics

Journal ref: Physical Chemistry Chemical Physics 19.36 (2017): 24505-24512

Alkoxide-intercalated NiFe-layered double hydroxides magnetic nanosheets as efficient water oxidation electrocatalysts

Authors: Jose A. Carrasco, Jorge Romero, María Varela, Frank Hauke, Gonzalo Abellán, Andreas Hirsch, Eugenio Coronado

Abstract: Alkoxide-intercalated NiFe-layered double hydroxides were synthesized via the nonaqueous methanolic route. These nanoplatelets exhibit high crystalline quality as demonstrated by atomic resolution scanning transmission electron microscopy combined with electron energy-loss spectroscopy. Moreover, the presence of the alkoxide moieties has been unambiguously demonstrated by means of thermogravimetri… ▽ More Alkoxide-intercalated NiFe-layered double hydroxides were synthesized via the nonaqueous methanolic route. These nanoplatelets exhibit high crystalline quality as demonstrated by atomic resolution scanning transmission electron microscopy combined with electron energy-loss spectroscopy. Moreover, the presence of the alkoxide moieties has been unambiguously demonstrated by means of thermogravimetric analysis coupled to a mass spectrometer. These NiFe-LDHs can be exfoliated in water or organic solvents and processed into homogeneous ultra-thin films (< 3nm thick) with the assistance of O2-plasma. The study of their behaviour as water oxidation electrocatalysts has shown an outstanding performance at basic pHs (small overpotential of ca. 249 mV and Tafel slopes in the range of 52-55 mV per decade). △ Less

Submitted 6 May, 2018; originally announced May 2018.

Journal ref: Inorg. Chem. Frontier 2016, 3, 478-487

Noncovalent Functionalization of Black Phosphorus

Authors: Gonzalo Abellán, Vicent Lloret, Udo Mundloch, Mario Marcia, Christian Neiss, Andreas Görling, Maria Varela, Frank Hauke, Andreas Hirsch

Abstract: The first non-covalent functionalization of black phosphorus (BP) is presented. The treatment of BP with electron- withdrawing 7,7,8,8-tetracyano-p-quinodimethane (TCNQ) leads to electron transfer from BP to the organic dopant. On the other hand, the non-covalent interaction of BP with perylene diimide is mainly due to van-der-Waals interactions but also leads to a considerable stabilization of th… ▽ More The first non-covalent functionalization of black phosphorus (BP) is presented. The treatment of BP with electron- withdrawing 7,7,8,8-tetracyano-p-quinodimethane (TCNQ) leads to electron transfer from BP to the organic dopant. On the other hand, the non-covalent interaction of BP with perylene diimide is mainly due to van-der-Waals interactions but also leads to a considerable stabilization of the BP flakes against oxygen degradation. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Journal ref: Angew. Chem. Int. Ed. 2016, 55, 14557-14562

Unravelling Dzyaloshinskii-Moriya interaction and chiral nature of Graphene/Cobalt interface

Authors: Fernando Ajejas, Adrian Gudín, Ruben Guerrero, Miguel Angel Niño, Stefania Pizzini, Jan Vogel, Manuel Valvidares, Pierluigi Gargiani, Mariona Cabero, Maria Varela, Julio Camarero, Rodolfo Miranda, Paolo Perna

Abstract: A major challenge for future spintronics is to develop suitable spin transport channels with long spin lifetime and propagation length. Graphene can meet these requirements, even at room temperature. On the other side, taking advantage of the fast motion of chiral textures, i.e., Néel-type domain walls and magnetic skyrmions, can satisfy the demands for high-density data storage, low power consump… ▽ More A major challenge for future spintronics is to develop suitable spin transport channels with long spin lifetime and propagation length. Graphene can meet these requirements, even at room temperature. On the other side, taking advantage of the fast motion of chiral textures, i.e., Néel-type domain walls and magnetic skyrmions, can satisfy the demands for high-density data storage, low power consumption and high processing speed. We have engineered epitaxial structures where an epitaxial ferromagnetic Co layer is sandwiched between an epitaxial Pt(111) buffer grown in turn onto MgO(111) substrates and a graphene layer. We provide evidence of a graphene-induced enhancement of the perpendicular magnetic anisotropy up to 4 nm thick Co films, and of the existence of chiral left-handed Néel-type domain walls stabilized by the effective Dzyaloshinskii-Moriya interaction (DMI) in the stack. The experiments show evidence of a sizeable DMI at the gr/Co interface, which is described in terms of a conduction electron mediated Rashba-DMI mechanism and points opposite to the Spin Orbit Coupling-induced DMI at the Co/Pt interface. In addition, the presence of graphene results in: i) a surfactant action for the Co growth, producing an intercalated, flat, highly perfect fcc film, pseudomorphic with Pt and ii) an efficient protection from oxidation. The magnetic chiral texture is stable at room temperature and grown on insulating substrate. Our findings open new routes to control chiral spin structures using interfacial engineering in graphene-based systems for future spin-orbitronics devices fully integrated on oxide substrates. △ Less

Submitted 2 April, 2018; v1 submitted 20 March, 2018; originally announced March 2018.

Comments: 10 pages, 6 figures

Journal ref: Nano Letters 2018

Low thermal conductivity in La-filled cobalt antimonide skutterudites with an inhomogeneous filling factor prepared under high-pressure conditions

Authors: F. Serrano-Sánchez, J. Prado-Gonjal, N. M. Nemes, N. Biskup, M. Varela, O. J. Dura, J. L. Martínez, M. T. Fernández-Díaz, F. Fauth, J. A. Alonso

Abstract: La-filled skutterudites LaxCo4Sb12 (x : 0.25 and 0.5) have been synthesized and sintered in one step under high-pressure conditions at 3.5 GPa in a piston-cylinder hydrostatic press. The structural properties of the reaction products were characterized by synchrotron X-ray powder diffraction, clearly showing an uneven filling factor of the skutterudite phases, confirmed by transmission electron mi… ▽ More La-filled skutterudites LaxCo4Sb12 (x : 0.25 and 0.5) have been synthesized and sintered in one step under high-pressure conditions at 3.5 GPa in a piston-cylinder hydrostatic press. The structural properties of the reaction products were characterized by synchrotron X-ray powder diffraction, clearly showing an uneven filling factor of the skutterudite phases, confirmed by transmission electron microscopy. The non-homogeneous distribution of La filling atoms is adequate to produce a significant decrease in lattice thermal conductivity, mainly due to strain field scattering of high-energy phonons. Furthermore, the lanthanum filler primarily acts as an Einstein-like vibrational mode having a strong impact on the phonon scattering. Extra-low thermal conductivity values of 2.39 W/mK and 1.30 W/mK are measured for La0.25Co4Sb12 and La0.5Co4Sb12 nominal compositions at 780 K, respectively. Besides this, lanthanum atoms have contributed to increase the charge carrier concentration in the samples. In the case of La0.25Co4Sb12, there is an enhancement of the power factor and an improvement of the thermoelectric properties. △ Less

Submitted 20 March, 2018; originally announced March 2018.

Journal ref: J. Mater. Chem. A, 2018,6, 118-126

Enhanced figure of merit in nanostructured (Bi, Sb) 2 Te 3 with optimized composition, prepared by a straightforward arc-melting procedure

Authors: F Serrano-Sánchez, M Gharsallah, NM Nemes, N Biskup, M Varela, JL Martínez, MT Fernández-Díaz, JA Alonso

Abstract: Sb-doped Bi2Te3 is known since the 1950s as the best thermoelectric material for near-room temperature operation. Improvements in material performance are expected from nanostructuring procedures. We present a straightforward and fast method to synthesize already nanostructured pellets that show an enhanced ZT due to a remarkably low thermal conductivity and unusually high Seebeck coefficient for… ▽ More Sb-doped Bi2Te3 is known since the 1950s as the best thermoelectric material for near-room temperature operation. Improvements in material performance are expected from nanostructuring procedures. We present a straightforward and fast method to synthesize already nanostructured pellets that show an enhanced ZT due to a remarkably low thermal conductivity and unusually high Seebeck coefficient for a nominal composition optimized for arc-melting: Bi0.35Sb1.65Te3. We provide a detailed structural analysis of the Bi2-xSbxTe3 series based on neutron powder diffraction as a function of composition and temperature that reveals the important role played by atomic vibrations. Arc-melting produces layered platelets with less than 50 nm-thick sheets. The low thermal conductivity is attributed to the phonon scattering at the grain boundaries of the nanosheets. This is a fast and cost-effective production method of highly efficient thermoelectric materials. △ Less

Submitted 20 March, 2018; originally announced March 2018.

Journal ref: 2017/7/24 Scientific Reports Volume 7 Issue 1 Pages 6277 Publisher Nature Publishing Group

Hybridization-controlled charge transfer and induced magnetism at correlated oxide interfaces

Authors: M. N. Grisolia, J. Varignon, G. Sanchez-Santolino, A. Arora, S. Valencia, M. Varela, R. Abrudan, E. Weschke, E. Schierle, J. E. Rault, J. -P. Rueff, A. Barthelemy, J. Santamaria, M. Bibes

Abstract: At interfaces between conventional materials, band bending and alignment are classically controlled by differences in electrochemical potential. Applying this concept to oxides in which interfaces can be polar and cations may adopt a mixed valence has led to the discovery of novel two-dimensional states between simple band insulators such as LaAlO3 and SrTiO3. However, many oxides have a more comp… ▽ More At interfaces between conventional materials, band bending and alignment are classically controlled by differences in electrochemical potential. Applying this concept to oxides in which interfaces can be polar and cations may adopt a mixed valence has led to the discovery of novel two-dimensional states between simple band insulators such as LaAlO3 and SrTiO3. However, many oxides have a more complex electronic structure, with charge, orbital and/or spin orders arising from correlations between transition metal and oxygen ions. Strong correlations thus offer a rich playground to engineer functional interfaces but their compatibility with the classical band alignment picture remains an open question. Here we show that beyond differences in electron affinities and polar effects, a key parameter determining charge transfer at correlated oxide interfaces is the energy required to alter the covalence of the metaloxygen bond. Using the perovskite nickelate (RNiO3) family as a template, we probe charge reconstruction at interfaces with gadolinium titanate GdTiO3. X-ray absorption spectroscopy shows that the charge transfer is thwarted by hybridization effects tuned by the rare-earth (R) size. Charge transfer results in an induced ferromagnetic-like state in the nickelate, exemplifying the potential of correlated interfaces to design novel phases. Further, our work clarifies strategies to engineer two-dimensional systems through the control of both doping and covalence. △ Less

Submitted 29 August, 2017; originally announced August 2017.

Comments: Work supported by ERC Consolidator grant MINT (Contract No. 615759)

Journal ref: Nature Phys. 12, 484 (2016)

Superconductivity and charge carrier localization in ultrathin $\mathbf{{La_{1.85}Sr_{0.15}CuO_4}/{La_2CuO_4}}$ bilayers

Authors: K. Sen, P. Marsik, S. Das, E. Perret, R. de Andres Prada, A. Alberca, N. Biskup, M. Varela, C. Bernhard

Abstract: $\mathrm{La_{1.85}Sr_{0.15}CuO_4}$/$\mathrm{La_2CuO_4}… ▽ More $\mathrm{La_{1.85}Sr_{0.15}CuO_4}$/$\mathrm{La_2CuO_4}$ (LSCO15/LCO) bilayers with a precisely controlled thickness of N unit cells (UCs) of the former and M UCs of the latter ([LSCO15\_N/LCO\_M]) were grown on (001)-oriented {\slao} (SLAO) substrates with pulsed laser deposition (PLD). X-ray diffraction and reciprocal space map (RSM) studies confirmed the epitaxial growth of the bilayers and showed that a [LSCO15\_2/LCO\_2] bilayer is fully strained, whereas a [LSCO15\_2/LCO\_7] bilayer is already partially relaxed. The \textit{in situ} monitoring of the growth with reflection high energy electron diffraction (RHEED) revealed that the gas environment during deposition has a surprisingly strong effect on the growth mode and thus on the amount of disorder in the first UC of LSCO15 (or the first two monolayers of LSCO15 containing one $\mathrm{CuO_2}$ plane each). For samples grown in pure $\mathrm{N_2O}$ gas (growth type-B), the first LSCO15 UC next to the SLAO substrate is strongly disordered. This disorder is strongly reduced if the growth is performed in a mixture of $\mathrm{N_2O}$ and $\mathrm{O_2}$ gas (growth type-A). Electric transport measurements confirmed that the first UC of LSCO15 next to the SLAO substrate is highly resistive and shows no sign of superconductivity for growth type-B, whereas it is superconducting for growth type-A. Furthermore, we found, rather surprisingly, that the conductivity of the LSCO15 UC next to the LCO capping layer strongly depends on the thickness of the latter. A LCO capping layer with 7~UCs leads to a strong localization of the charge carriers in the adjacent LSCO15 UC and suppresses superconductivity. The magneto-transport data suggest a similarity with the case of weakly hole doped LSCO single crystals that are in a so-called {"{cluster-spin-glass state}"} △ Less

Submitted 18 May, 2017; originally announced May 2017.

Journal ref: Phys. Rev. B 95, 214506 2017

Molecular dynamics simulation of behaviour of water in nano-confined ionic liquid--water mixtures

Authors: Borja Docampo-Álvarez, Victor Gómez-González, Hadrián Montes-Campos, José M. Otero-Mato, Trinidad Méndez-Morales, Oscar Cabeza, Luis J. Luis Gallego del Hoyo, Ruth M. Lynden-Bell, Vladislav B. Ivaništšev, Maxim V. Fedorov, Luis M. Varela

Abstract: This work describes the behaviour of water molecules in 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid under nanoconfinement between graphene sheets. By means of molecular dynamics simulations, an adsorption of water molecules at the graphene surface is studied. A depletion of water molecules in the vicinity of the neutral and negatively charged graphene surfaces and their adsorption a… ▽ More This work describes the behaviour of water molecules in 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid under nanoconfinement between graphene sheets. By means of molecular dynamics simulations, an adsorption of water molecules at the graphene surface is studied. A depletion of water molecules in the vicinity of the neutral and negatively charged graphene surfaces and their adsorption at the positively charged surface are observed in line with the preferential hydration of the ionic liquid anions. The findings are appropriately described using a two-level statistical model. The confinement effect on the structure and dynamics of the mixtures is thoroughly analyzed using the density and the potential of mean force profiles, as well as by the vibrational densities of states of water molecules near the graphene surface. The orientation of water molecules and the water-induced structural transitions in the layer closest to the graphene surface are also discussed. △ Less

Submitted 11 April, 2016; originally announced April 2016.

Comments: 14 pages, 7 figures, to appear in Journal of Physics: Condensed Matter

Journal ref: Journal of Physics: Condensed Matter 28 (2016) 464001

X-ray absorption study of the ferromagnetic Cu moment at the $\mathbf{{YBa_2Cu_3O_7}/{La_{2/3}Ca_{1/3}MnO_3}}$ interface and the variation of its exchange interaction with the Mn moment

Authors: K. Sen, E. Perret, A. Alberca, M. A. Uribe-Laverde, I. Marozau, M. Yazdi-Rizi, B. P. P. Mallett, P. Marsik, C. Piamonteze, Y. Khaydukov, M. Döbeli, T. Keller, N. Biškup, M. Varela, J. Vašátko, D. Munzar, C. Bernhard

Abstract: With x-ray absorption spectroscopy and polarized neutron reflectometry we studied how the magnetic proximity effect at the interface between the cuprate high-$T_C$ superconductor $\mathrm{YBa_2Cu_3O_7}$ (YBCO) and the ferromagnet $\mathrm{La_{2/3}Ca_{1/3}MnO_3}$ (LCMO) is related to the electronic and magnetic properties of the LCMO layers. In particular, we explored how the magnitude of the ferro… ▽ More With x-ray absorption spectroscopy and polarized neutron reflectometry we studied how the magnetic proximity effect at the interface between the cuprate high-$T_C$ superconductor $\mathrm{YBa_2Cu_3O_7}$ (YBCO) and the ferromagnet $\mathrm{La_{2/3}Ca_{1/3}MnO_3}$ (LCMO) is related to the electronic and magnetic properties of the LCMO layers. In particular, we explored how the magnitude of the ferromagnetic Cu moment on the YBCO side depends on the strength of the antiferromagnetic (AF) exchange coupling with the Mn moment on the LCMO side. We found that the Cu moment remains sizeable if the AF coupling with the Mn moments is strongly reduced or even entirely suppressed. The ferromagnetic order of the Cu moments thus seems to be intrinsic to the interfacial CuO$_2$ planes and related to a weakly ferromagnetic intra-planar exchange interaction. The latter is discussed in terms of the partial occupation of the Cu $3d_{3z^2-r^2}$ orbitals, which occurs in the context of the so-called orbital reconstruction of the interfacial Cu ions. △ Less

Submitted 3 May, 2016; v1 submitted 15 January, 2016; originally announced January 2016.

Journal ref: Phys. Rev. B 93, 205131 (2016)

Granular superconductivity and magnetic-field-driven recovery of macroscopic coherence in a cuprate/manganite multilayer

Authors: B. P. P. Mallett, J. Khmaladze, P. Marsik, E. Perret, A. Cerreta, M. Orlita, N. Biškup, M. Varela, C. Bernhard

Abstract: We show that in Pr$ _{0.5} $La$ _{0.2} $Ca$ _{0.3} $MnO$ _{3} $/YBa$ _{2} $Cu$ _{3} $O$ _{7} $ (PLCMO/YBCO) multilayers the low temperature state of YBCO is very resistive and resembles the one of a granular superconductor or a frustrated Josephson-junction network. Notably, a coherent superconducting response can be restored with a large magnetic field which also suppresses the charge-orbital ord… ▽ More We show that in Pr$ _{0.5} $La$ _{0.2} $Ca$ _{0.3} $MnO$ _{3} $/YBa$ _{2} $Cu$ _{3} $O$ _{7} $ (PLCMO/YBCO) multilayers the low temperature state of YBCO is very resistive and resembles the one of a granular superconductor or a frustrated Josephson-junction network. Notably, a coherent superconducting response can be restored with a large magnetic field which also suppresses the charge-orbital order in PLCMO. This coincidence suggests that the granular superconducting state of YBCO is induced by the charge-orbital order of PLCMO. The coupling mechanism and the nature of the induced inhomogeneous state in YBCO remain to be understood. △ Less

Submitted 13 November, 2016; v1 submitted 10 December, 2015; originally announced December 2015.

Comments: 6 pages, 4 figures. Supplementary Information as extra file

Journal ref: Phys. Rev. B 94, 180503 (2016)

Conducting interfaces between amorphous oxide layers and SrTiO3(110) and SrTiO3(111)

Authors: Mateusz Scigaj, Jaume Gazquez, Maria Varela, Josep Fontcuberta, Gervasi Herranz, Florencio Sanchez

Abstract: Interfaces between (110) and (111)SrTiO3 (STO) single crystalline substrates and amorphous oxide layers, LaAlO3 (a-LAO), Y:ZrO2 (a-YSZ), and SrTiO3 (a-STO) become conducting above a critical thickness tc. Here we show that tc for a-LAO is not depending on the substrate orientation, i.e. tc (a-LAO/(110)STO) ~ tc(a-LAO/(111)STO) interfaces, whereas it strongly depends on the composition of the amorp… ▽ More Interfaces between (110) and (111)SrTiO3 (STO) single crystalline substrates and amorphous oxide layers, LaAlO3 (a-LAO), Y:ZrO2 (a-YSZ), and SrTiO3 (a-STO) become conducting above a critical thickness tc. Here we show that tc for a-LAO is not depending on the substrate orientation, i.e. tc (a-LAO/(110)STO) ~ tc(a-LAO/(111)STO) interfaces, whereas it strongly depends on the composition of the amorphous oxide: tc(a-LAO/(110)STO) < tc(a-YSZ/(110)STO) < tc(a-STO/(110)STO). It is concluded that the formation of oxygen vacancies in amorphous-type interfaces is mainly determined by the oxygen affinity of the deposited metal ions, rather than orientational-dependent enthalpy vacancy formation and diffusion. Scanning transmission microscopy characterization of amorphous and crystalline LAO/STO(110) interfaces shows much higher amount of oxygen vacancies in the former, providing experimental evidence of the distinct mechanism of conduction in these interfaces. △ Less

Submitted 28 September, 2015; originally announced September 2015.

Journal ref: Solid State Ionics 281, 68 (2015)

High On/Off Ratio Memristive Switching of Manganite-Cuprate Bilayer by Interfacial Magnetoelectricity

Authors: Xiao Shen, Timothy J. Pennycook, David Hernandez-Martin, Ana Pérez, Maria Varela, Yevgeniy S. Puzyrev, Carlos Leon, Zouhair Sefrioui, Jacobo Santamaria, Sokrates T. Pantelides

Abstract: Memristive switching serves as the basis for a new generation of electronic devices. Memristors are two-terminal devices in which the current is turned on and off by redistributing point defects, e.g., vacancies, which is difficult to control. Memristors based on alternative mechanisms have been explored, but achieving both the high On/Off ratio and the low switching energy desirable for use in el… ▽ More Memristive switching serves as the basis for a new generation of electronic devices. Memristors are two-terminal devices in which the current is turned on and off by redistributing point defects, e.g., vacancies, which is difficult to control. Memristors based on alternative mechanisms have been explored, but achieving both the high On/Off ratio and the low switching energy desirable for use in electronics remains a challenge. Here we report memristive switching in a La0.7Ca0.3MnO3/PrBa2Cu3O7 bilayer with an On/Off ratio greater than 10^3 and demonstrate that the phenomenon originates from a new type of interfacial magnetoelectricity. Using results from first-principles calculations, we show that an external electric-field induces subtle displacements of the interfacial Mn ions, which switches on/off an interfacial magnetic "dead" layer, resulting in memristive behavior for spin-polarized electron transport across the bilayer. The interfacial nature of the switching entails low energy cost about of a tenth of atto Joule for write/erase a "bit". Our results indicate new opportunities for manganite/cuprate systems and other transition-metal-oxide junctions in memristive applications. △ Less

Submitted 12 March, 2015; originally announced March 2015.

Journal ref: Advanced Materials Interfaces 3, 1600086 (2016)

Synthetic magnetoelectric coupling in a nanocomposite multiferroic

Authors: P. Jain, Q. Wang, M. Roldan, A. Glavic, V. Lauter, C. Urban, Z. Bi, T. Ahmed, J. Zhu, M. Varela, Q. Jia, M. R. Fitzsimmons

Abstract: Given the paucity of single phase multiferroic materials (with large ferromagnetic moment), composite systems seem an attractive solution in the quest to realize magnetoelectric cou-pling between ferromagnetic and ferroelectric order parameters. Despite having antiferro-magnetic order, BiFeO3 (BFO) has nevertheless been a key material in this quest due to excel-lent ferroelectric properties at roo… ▽ More Given the paucity of single phase multiferroic materials (with large ferromagnetic moment), composite systems seem an attractive solution in the quest to realize magnetoelectric cou-pling between ferromagnetic and ferroelectric order parameters. Despite having antiferro-magnetic order, BiFeO3 (BFO) has nevertheless been a key material in this quest due to excel-lent ferroelectric properties at room temperature. We studied a superlattice composed of 8 repetitions of 6 unit cells of La0.7Sr0.3MnO3 (LSMO) grown on 5 unit cells of BFO. Significant net uncompensated magnetization in BFO is demonstrated using polarized neutron reflectometry in an insulating superlattice. Remarkably, the magnetization enables magnetic field to change the dielectric properties of the superlattice, which we cite as an example of synthetic magnetoelectric coupling. Importantly, this controlled creation of magnetic moment in BFO suggests a much needed path forward for the design and implementation of integrated oxide devices for next generation magnetoelectric data storage platforms. △ Less

Submitted 11 September, 2014; v1 submitted 30 July, 2014; originally announced July 2014.

Competition between covalent bonding and charge transfer at complex-oxide interfaces

Authors: Juan Salafranca, Julian Rincon, Javier Tornos, Carlos León, Jacobo Santamaria, Elbio Dagotto, Stephen J. Pennycook, Maria Varela

Abstract: Here we study the electronic properties of cuprate/manganite interfaces. By means of atomic resolution electron microscopy and spectroscopy, we produce a subnanometer scale map of the transition metal oxidation state profile across the interface between the high $T_c$ superconductor YBa$_2$Cu$_3$O$_{7-δ}$ and the colossal magnetoresistance compound (La,Ca)MnO$_3$. A net transfer of electrons from… ▽ More Here we study the electronic properties of cuprate/manganite interfaces. By means of atomic resolution electron microscopy and spectroscopy, we produce a subnanometer scale map of the transition metal oxidation state profile across the interface between the high $T_c$ superconductor YBa$_2$Cu$_3$O$_{7-δ}$ and the colossal magnetoresistance compound (La,Ca)MnO$_3$. A net transfer of electrons from manganite to cuprate with a peculiar non-monotonic charge profile is observed. Model calculations rationalize the profile in terms of the competition between standard charge transfer tendencies (due to band mismatch), strong chemical bonding effects across the interface, and Cu substitution into the Mn lattice, with different characteristic length scales. △ Less

Submitted 27 June, 2014; originally announced June 2014.

Comments: 11+7 pages, 3+2 figures

Journal ref: Phys. Rev. Lett. 112, 196802 (2014)

Complex networks analysis in socioeconomic models

Authors: Luis M. Varela, Giulia Rotundo, Marcel Ausloos, Jesus Carrete

Abstract: This chapter aims at reviewing complex networks models and methods that were either developed for or applied to socioeconomic issues, and pertinent to the theme of New Economic Geography. After an introduction to the foundations of the field of complex networks, the present summary adds insights on the statistical mechanical approach, and on the most relevant computational aspects for the treatmen… ▽ More This chapter aims at reviewing complex networks models and methods that were either developed for or applied to socioeconomic issues, and pertinent to the theme of New Economic Geography. After an introduction to the foundations of the field of complex networks, the present summary adds insights on the statistical mechanical approach, and on the most relevant computational aspects for the treatment of these systems. As the most frequently used model for interacting agent-based systems, a brief description of the statistical mechanics of the classical Ising model on regular lattices, together with recent extensions of the same model on small-world Watts-Strogatz and scale-free Albert-Barabasi complex networks is included. Other sections of the chapter are devoted to applications of complex networks to economics, finance, spreading of innovations, and regional trade and developments. The chapter also reviews results involving applications of complex networks to other relevant socioeconomic issues, including results for opinion and citation networks. Finally, some avenues for future research are introduced before summarizing the main conclusions of the chapter. △ Less

Submitted 1 April, 2014; v1 submitted 26 March, 2014; originally announced March 2014.

Comments: 39 pages, 185 references, (not final version of) a chapter prepared for Complexity and Geographical Economics - Topics and Tools, P. Commendatore, S.S. Kayam and I. Kubin Eds. (Springer, to be published)

Journal ref: Complexity and Geographical Economics. Topics and Tools, P. Commendatore, S.S. Kayam and I. Kubin Eds. (Springer, 2015) pp. 209-245

Structural, magnetic and superconducting properties of pulsed-laser-deposition-grown $\rm{La_{1.85}Sr_{0.15}CuO_{4}/La_{2/3}Ca_{1/3}MnO_{3}}$ superlattices on $\rm{(001)}$-oriented $\rm{LaSrAlO_{4}}$ substrates

Authors: S. Das, K. Sen, I. Marozau, M. A. Uribe-Laverde, N. Biskup, M. Varela, Y. Khaydukov, O. Soltwedel, T. Keller, M. Dobeli, C. W. Schneider, C. Bernhard

Abstract: Epitaxial La1.85Sr0.15CuO4/La2/3Ca1/3MnO3 superlattices on (001)-oriented LaSrAlO4 substrates have been grown with pulsed laser deposition technique. Their structural, magnetic and superconducting properties have been determined with in-situ reflection high energy electron diffraction, x-ray diffraction, specular neutron reflectometry, scanning transmission electron microscopy, electric transport,… ▽ More Epitaxial La1.85Sr0.15CuO4/La2/3Ca1/3MnO3 superlattices on (001)-oriented LaSrAlO4 substrates have been grown with pulsed laser deposition technique. Their structural, magnetic and superconducting properties have been determined with in-situ reflection high energy electron diffraction, x-ray diffraction, specular neutron reflectometry, scanning transmission electron microscopy, electric transport, and magnetization measurements. We find that despite the large mismatch between the in-plane lattice parameters of LSCO and LCMO these superlattices can be grown epitaxially and with a high crystalline quality. While the first LSCO layer remains clamped to the LSAO substrate, a sizeable strain relaxation occurs already in the first LCMO layer. The following LSCO and LCMO layers adopt a nearly balanced state in which the tensile and compressive strain effects yield alternating in-plane lattice parameters with an almost constant average value. No major defects are observed in the LSCO layers, while a significant number of vertical antiphase boundaries are found in the LCMO layers. The LSCO layers remain superconducting with a relatively high superconducting onset temperature of about 36 K. The macroscopic superconducting response is also evident in the magnetization data due to a weak diamagnetic signal below 10 K for H || ab and a sizeable paramagnetic shift for H || c that can be explained in terms of a vortex-pinning-induced flux compression. The LCMO layers maintain a strongly ferromagnetic state with a Curie temperature of about 190 K and a large low-temperature saturation moment of about 3.5(1) muB. These results suggest that the LSCO/LCMO superlattices can be used to study the interaction between the antagonistic ferromagnetic and superconducting orders and, in combination with previous studies on YBCO/LCMO superlattices, may allow one to identify the relevant mechanisms. △ Less

Submitted 25 February, 2014; originally announced February 2014.

Comments: 13 pages, 11 figures

Journal ref: Physical Review B 89, 094511 (2014)

Tetragonal phase of epitaxial room-temperature antiferromagnet CuMnAs

Authors: P. Wadley, V. Novák, R. P. Campion, C. Rinaldi, X. Martí, H. Reichlová, J. Zelezný, J. Gazquez, M. A. Roldan, M. Varela, D. Khalyavin, S. Langridge, D. Kriegner, F. Máca, J. Masek, R. Bertacco, V. Holy, A. W. Rushforth, K. W. Edmonds, B. L. Gallagher, C. T. Foxon, J. Wunderlich, T. Jungwirth

Abstract: Recent studies have demonstrated the potential of antiferromagnets as the active component in spintronic devices. This is in contrast to their current passive role as pinning layers in hard disk read heads and magnetic memories. Here we report the epitaxial growth of a new high-temperature antiferromagnetic material, tetragonal CuMnAs, which exhibits excellent crystal quality, chemical order and c… ▽ More Recent studies have demonstrated the potential of antiferromagnets as the active component in spintronic devices. This is in contrast to their current passive role as pinning layers in hard disk read heads and magnetic memories. Here we report the epitaxial growth of a new high-temperature antiferromagnetic material, tetragonal CuMnAs, which exhibits excellent crystal quality, chemical order and compatibility with existing semiconductor technologies. We demonstrate its growth on the III-V semiconductors GaAs and GaP, and show that the structure is also lattice matched to Si. Neutron diffraction shows collinear antiferromagnetic order with a high Neél temperature. Combined with our demonstration of room-temperature exchange coupling in a CuMnAs/Fe bilayer, we conclude that tetragonal CuMnAs films are suitable candidate materials for antiferromagnetic spintronics. △ Less

Submitted 14 February, 2014; originally announced February 2014.

Comments: 16 pages, 5 figures, Published in Nature Communications (2013)

Journal ref: Nat. Commun. 4:2322

Bi containing multiferroic perovskite oxide thin films

Authors: Rainer Schmidt, Eric Langenberg, Jofre Ventura, Manuel Varela

Abstract: In this work multiferroic thin films of Bi containing perovskite oxides are discussed, where the driving force for ferroelectricity are the Bi3+ lone-pair electrons. First, a brief introduction of Bi containing multiferroic perovskite oxides will be presented to describe the mechanisms for establishing magnetic and ferroelectric order in these compounds and some recent developments in this field o… ▽ More In this work multiferroic thin films of Bi containing perovskite oxides are discussed, where the driving force for ferroelectricity are the Bi3+ lone-pair electrons. First, a brief introduction of Bi containing multiferroic perovskite oxides will be presented to describe the mechanisms for establishing magnetic and ferroelectric order in these compounds and some recent developments in this field of research are reported. The second section addresses experimental aspects of epitaxial thin film growth of BiMnO3, (Bi0.9La0.1)2NiMnO6 (BLNMO) and BiFeO3 thin films by pulsed laser deposition. The third section is dedicated to the physical properties of such films in terms of structural characterization and the magnetic and ferroelectric properties and their correlations in form of magnetoelectric coupling (MEC). △ Less

Submitted 10 February, 2014; v1 submitted 6 February, 2014; originally announced February 2014.

Storing magnetic information in IrMn/MgO/Ta tunnel junctions via field-cooling

Authors: D. Petti, E. Albisetti, H. Reichlová, J. Gazquez, M. Varela, M. Molina-Ruiz, A. F. Lopeandía, K. Olejník, V. Novák, I. Fina, B. Dkhil, J. Hayakawa, X. Marti, J. Wunderlich, T. Jungwirth, R. Bertacco

Abstract: Tunneling junctions containing no ferromagnetic elements have been fabricated and we show that distinct resistance states can be set by field cooling the devices from above the Néel along different orientations. Variations of the resistance up to 10% are found upon field cooling in applied fields of 2T, in-plane or out of plane. Below TN, we found that the metastable states are insensitive to magn… ▽ More Tunneling junctions containing no ferromagnetic elements have been fabricated and we show that distinct resistance states can be set by field cooling the devices from above the Néel along different orientations. Variations of the resistance up to 10% are found upon field cooling in applied fields of 2T, in-plane or out of plane. Below TN, we found that the metastable states are insensitive to magnetic fields thus constituting a memory element robust against external magnetic fields. Our work provides the demonstration of an electrically readable magnetic memory device, which contains no ferromagnetic elements and stores the information in an antiferromagnetic active layer. △ Less

Submitted 15 February, 2013; originally announced February 2013.

Electron transfer and ionic displacements at the origin of the 2D electron gas at the LAO/STO interface: Direct measurements with atomic-column spatial resolution

Authors: C. Cantoni, J. Gazquez, F. Miletto Granozio, M. P. Oxley, M. Varela, A. R. Lupini, S. J. Pennycook, C. Aruta, U. Scotti di Uccio, P. Perna, D. Maccariello

Abstract: The discovery that the interface between two band gap insulators LaAlO3 and SrTiO3 is highly conducting has raised an enormous interest in the field of oxide electronics. The LAlO3/SrTiO3 interface can be tuned using an electric field and switched from a superconducting to an insulating state. Conducting paths in an insulating background can be written applying a voltage with the tip of an atomic… ▽ More The discovery that the interface between two band gap insulators LaAlO3 and SrTiO3 is highly conducting has raised an enormous interest in the field of oxide electronics. The LAlO3/SrTiO3 interface can be tuned using an electric field and switched from a superconducting to an insulating state. Conducting paths in an insulating background can be written applying a voltage with the tip of an atomic force microscope, creating great promise for the development of a new generation of nanoscale electronic devices. However, the mechanism for interface conductivity in LaAlO3/SrTiO3 has remained elusive. The theoretical explanation based on an intrinsic charge transfer (electronic reconstruction) has been strongly challenged by alternative descriptions based on point defects. In this work, thanks to modern aberration-corrected electron probes with atomic-scale spatial resolution, interfacial charge and atomic displacements originating the electric field within the system can be simultaneously measured, yielding unprecedented experimental evidence in favor of an intrinsic electronic reconstruction. △ Less

Submitted 20 June, 2012; originally announced June 2012.

Comments: Accepted for publication in Advanced Materials. Published online on 06/20/2012

Journal ref: Advanced Materials 24, 3952 (2012)

Measurement of the coupling between applied stress and magnetism in a manganite thin film

Authors: Surendra Singh, M. R. Fitzsimmons, T. Lookman, H. Jeen, A. Biswas, M. A. Roldan, M. Varela

Abstract: We measured the magnetization depth profile of a (La1-xPrx)1-yCayMnO3 (x = 0.60\pm0.04, y = 0.20\pm0.03) film as a function of applied bending stress using polarized neutron reflectometry. From these measurements we obtained a coupling coefficient relating strain to the depth dependent magnetization. We found application of compressive (tensile) bending stress along the magnetic easy axis increase… ▽ More We measured the magnetization depth profile of a (La1-xPrx)1-yCayMnO3 (x = 0.60\pm0.04, y = 0.20\pm0.03) film as a function of applied bending stress using polarized neutron reflectometry. From these measurements we obtained a coupling coefficient relating strain to the depth dependent magnetization. We found application of compressive (tensile) bending stress along the magnetic easy axis increases (decreases) the magnetization of the film. △ Less

Submitted 19 January, 2012; originally announced January 2012.

Journal ref: Phys. Rev. B 85, 214440 (2012)

Magnetic non-uniformity and thermal hysteresis of magnetism in a manganite thin film

Authors: Surendra Singh, M. R. Fitzsimmons, T. Lookman, J. D. Thompson, H. Jeen, A. Biswas, M. A. Roldan, M. Varela

Abstract: We measured the chemical and magnetic depth profiles of a single crystalline (La$_{1-x}$Pr$_x$)$_{1-y}$Ca$_y$MnO$_{3-δ}$ (x = 0.52\pm0.05, y = 0.23\pm0.04, δ = 0.14\pm0.10) film grown on a NdGaO3 substrate using x-ray reflectometry, electron microscopy, electron energy-loss spectroscopy and polarized neutron reflectometry. Our data indicate that the film exhibits coexistence of different magnetic… ▽ More We measured the chemical and magnetic depth profiles of a single crystalline (La$_{1-x}$Pr$_x$)$_{1-y}$Ca$_y$MnO$_{3-δ}$ (x = 0.52\pm0.05, y = 0.23\pm0.04, δ = 0.14\pm0.10) film grown on a NdGaO3 substrate using x-ray reflectometry, electron microscopy, electron energy-loss spectroscopy and polarized neutron reflectometry. Our data indicate that the film exhibits coexistence of different magnetic phases as a function of depth. The magnetic depth profile is correlated with a variation of chemical composition with depth. The thermal hysteresis of ferromagnetic order in the film suggests a first order ferromagnetic transition at low temperatures. △ Less

Submitted 14 December, 2011; originally announced December 2011.

Journal ref: Phys. Rev. Lett. 108, 077207 (2012)

Pulsed laser deposition growth of heteroepitaxial YBa2Cu3O7/La0.67Ca0.33MnO3 superlattices on NdGaO3 and Sr0.7La0.3Al0.65Ta0.35O3 substrates

Authors: V. K. Malik, I. Marozau, S. Das, B. Doggett, D. K. Satapathy, M. A. Uribe-Laverde, N. Biskup, M. Varela, C. W. Schneider, C. Marcelot, J. Stahn, C. Bernhard

Abstract: Heteroepitaxial superlattices of [YBa2Cu3O7(n)/ La0.67Ca0.33MnO3(m)]x, where n and m are the number of YBCO and LCMO monolayers and x the number of bilayer repetitions, have been grown with pulsed laser deposition on NdGaO3 (110) and Sr0.7La0.3Al0.65Ta0.35O3 (LSAT) (001). These substrates are well lattice matched with YBCO and LCMO and, unlike the commonly used SrTiO3, they do not give rise to com… ▽ More Heteroepitaxial superlattices of [YBa2Cu3O7(n)/ La0.67Ca0.33MnO3(m)]x, where n and m are the number of YBCO and LCMO monolayers and x the number of bilayer repetitions, have been grown with pulsed laser deposition on NdGaO3 (110) and Sr0.7La0.3Al0.65Ta0.35O3 (LSAT) (001). These substrates are well lattice matched with YBCO and LCMO and, unlike the commonly used SrTiO3, they do not give rise to complex and uncontrolled strain effects due to structural transitions at low temperature. The growth dynamics and the structure have been studied in-situ with reflection high energy electron diffraction (RHEED) and ex-situ with scanning transmission electron microscopy (STEM), x-ray diffraction, and neutron reflectometry. The individual layers are found to be flat and continuous over long lateral distances with sharp and coherent interfaces and with a well-defined thickness of the individual layer. The only visible defects are antiphase boundaries in the YBCO layers that originate from perovskite unit cell height steps at the interfaces with the LCMO layers. We also find that the first YBCO monolayer at the interface with LCMO has an unusual growth dynamics and is lacking the CuO chain layer while the subsequent YBCO layers have the regular Y-123 structure. Accordingly, the CuO2 bilayers at both the LCMO/YBCO and the YBCO/LCMO interfaces are lacking one of their neighboring CuO chain layers and thus half of their hole doping reservoir. Nevertheless, from electric transport measurements on asuperlattice with n=2 we obtain evidence that the interfacial CuO2 bilayers remain conducting and even exhibit the onset of a superconducting transition at very low temperature. Finally, we show from dc magnetization and neutron reflectometry measurements that the LCMO layers are strongly ferromagnetic. △ Less

Submitted 18 October, 2011; originally announced October 2011.

Journal ref: Phys. Rev. B 85, 054514 (2012)

Phase transition close to room temperature in BiFeO3 thin films

Authors: J. Kreisel, P. Jadhav, O. Chaix-Pluchery, M. Varela, N. Dix, F. Sanchez, J. Fontcuberta

Abstract: BiFeO3 (BFO) multiferroic oxide has a complex phase diagram that can be mapped by appropriately substrate-induced strain in epitaxial films. By using Raman spectroscopy, we conclusively show that films of the so-called supertetragonal T-BFO phase, stabilized under compressive strain, displays a reversible temperature-induced phase transition at about 100\circ, thus close to room temperature. BiFeO3 (BFO) multiferroic oxide has a complex phase diagram that can be mapped by appropriately substrate-induced strain in epitaxial films. By using Raman spectroscopy, we conclusively show that films of the so-called supertetragonal T-BFO phase, stabilized under compressive strain, displays a reversible temperature-induced phase transition at about 100\circ, thus close to room temperature. △ Less

Submitted 28 July, 2011; originally announced July 2011.

Comments: accepted in J. Phys.: Condens. Matter (Fast Track Communication)

Journal ref: J. Phys.: Condens. Matter 23 (2011) 342202

Surface roughness and thermal conductivity of semiconductor nanowires: going below the Casimir limit

Authors: Jesús Carrete, Luis Javier Gallego, Luis Miguel Varela, Natalio Mingo

Abstract: By explicitly considering surface roughness at the atomic level, we quantitatively show that the thermal conductivity of Si nanowires can be lower than Casimir's classical limit. However, this violation only occurs for deep surface degradation. For shallow surface roughness, the Casimir formula is shown to yield a good approximation to the phonon mean free paths and conductivity, even for nanowire… ▽ More By explicitly considering surface roughness at the atomic level, we quantitatively show that the thermal conductivity of Si nanowires can be lower than Casimir's classical limit. However, this violation only occurs for deep surface degradation. For shallow surface roughness, the Casimir formula is shown to yield a good approximation to the phonon mean free paths and conductivity, even for nanowire diameters as thin as 2.22 nm. Our exact treatment of roughness scattering is in stark contrast with a previously proposed perturbative approach, which is found to overpredict scattering rates by an order of magnitude. The obtained results suggest that a complete theoretical understanding of some previously published experimental results is still lacking. △ Less

Submitted 18 March, 2011; originally announced March 2011.

Comments: 11 pages, 4 figures

Reentrant phase behaviour for systems with competition between phase separation and self-assembly

Authors: Aleks Reinhardt, Alexander J. Williamson, Jonathan P. K. Doye, Jesús Carrete, Luis M. Varela, Ard A. Louis

Abstract: In patchy particle systems where there is competition between the self-assembly of finite clusters and liquid-vapour phase separation, reentrant phase behaviour is observed, with the system passing from a monomeric vapour phase to a region of liquid-vapour phase coexistence and then to a vapour phase of clusters as the temperature is decreased at constant density. Here, we present a classical stat… ▽ More In patchy particle systems where there is competition between the self-assembly of finite clusters and liquid-vapour phase separation, reentrant phase behaviour is observed, with the system passing from a monomeric vapour phase to a region of liquid-vapour phase coexistence and then to a vapour phase of clusters as the temperature is decreased at constant density. Here, we present a classical statistical mechanical approach to the determination of the complete phase diagram of such a system. We model the system as a van der Waals fluid, but one where the monomers can assemble into monodisperse clusters that have no attractive interactions with any of the other species. The resulting phase diagrams show a clear region of reentrance. However, for the most physically reasonable parameter values of the model, this behaviour is restricted to a certain range of density, with phase separation still persisting at high densities. △ Less

Submitted 22 October, 2010; originally announced October 2010.

Comments: 13 pages, 10 figures

Journal ref: J. Chem. Phys. 134, 104905 (2011)

Strain-driven non-collinear magnetic ordering in orthorhombic epitaxial YMnO3 thin films

Authors: X. Marti, V. Skumryev, V. Laukhin, R. Bachelet, C. Ferrater, M. V. García-Cuenca, M. Varela, F. Sánchez, J. Fontcuberta

Abstract: We show that using epitaxial strain and chemical pressure in orthorhombic YMnO3 and Co-substituted (YMn0.95Co0.05O3) thin films, a ferromagnetic response can be gradually introduced and tuned. These results, together with the measured anisotropy of the magnetic response, indicate that the unexpected observation of ferromagnetism in orthorhombic o-RMnO3 (R= Y, Ho, Tb, etc) films originates from str… ▽ More We show that using epitaxial strain and chemical pressure in orthorhombic YMnO3 and Co-substituted (YMn0.95Co0.05O3) thin films, a ferromagnetic response can be gradually introduced and tuned. These results, together with the measured anisotropy of the magnetic response, indicate that the unexpected observation of ferromagnetism in orthorhombic o-RMnO3 (R= Y, Ho, Tb, etc) films originates from strain-driven breaking of the fully compensated magnetic ordering by pushing magnetic moments away from the antiferromagnetic [010] axis. We show that the resulting canting angle and the subsequent ferromagnetic response, gradually increase (up to ~ 1.2\degree) by compression of the unit cell. We will discuss the relevance of these findings, in connection to the magnetoelectric response of orthorhombic manganites. △ Less

Submitted 12 February, 2011; v1 submitted 20 October, 2010; originally announced October 2010.

Comments: Text + Figs Accepted in J. Appl. Phys

Journal ref: J. Appl. Phys. 108, 123917 (2010)

Asymmetric orbital-lattice interactions in ultra-thin correlated oxide films

Authors: J. Chakhalian, J. M. Rondinelli, Jian Liu, B. A. Gray, M. Kareev, E. J. Moon, N. Prasai, J. L. Cohn, M. Varela, I. C. Tung, M. J. Bedzyk, S. G. Altendorf, F. Strigari, B. Dabrowski, L. H. Tjeng, P. J. Ryan, J. W. Freeland

Abstract: Using resonant X-ray spectroscopies combined with density functional calculations, we find an asymmetric bi-axial strain-induced $d$-orbital response in ultra-thin films of the correlated metal LaNiO$_3$ which are not accessible in the bulk. The sign of the misfit strain governs the stability of an octahedral "breathing" distortion, which, in turn, produces an emergent charge-ordered ground state… ▽ More Using resonant X-ray spectroscopies combined with density functional calculations, we find an asymmetric bi-axial strain-induced $d$-orbital response in ultra-thin films of the correlated metal LaNiO$_3$ which are not accessible in the bulk. The sign of the misfit strain governs the stability of an octahedral "breathing" distortion, which, in turn, produces an emergent charge-ordered ground state with an altered ligand-hole density and bond covalency. Control of this new mechanism opens a pathway to rational orbital engineering, providing a platform for artificially designed Mott materials. △ Less

Submitted 25 August, 2011; v1 submitted 7 August, 2010; originally announced August 2010.

Journal ref: Phys. Rev. Lett. 107, 116805 (2011)

Conducting interfaces between band insulating oxides: the LaGaO3/SrTiO3

Authors: Paolo Perna, Davide Maccariello, Milan Radovic, Umberto Scotti di Uccio, Ilaria Pallecchi, Marta Codda, Daniele Marré, Claudia Cantoni, Jaume Gazquez, Maria Varela, Steve Pennycook, Fabio Miletto Granozio

Abstract: We show that the growth of the heterostructure LaGaO3/SrTiO3 yields the formation of a highly conductive interface. Our samples were carefully analyzed by high resolution electron microscopy, in order to assess their crystal perfection and to evaluate the abruptness of the interface. Their carrier density and sheet resistance are compared to the case of LaAlO3/SrTiO3 and a superconducting transiti… ▽ More We show that the growth of the heterostructure LaGaO3/SrTiO3 yields the formation of a highly conductive interface. Our samples were carefully analyzed by high resolution electron microscopy, in order to assess their crystal perfection and to evaluate the abruptness of the interface. Their carrier density and sheet resistance are compared to the case of LaAlO3/SrTiO3 and a superconducting transition is found. The results open the route to widening the field of polar-non polar interfaces, pose some phenomenological constrains to their underlying physics and highlight the chance of tailoring their properties for future applications by adopting suitable polar materials. △ Less

Submitted 1 October, 2010; v1 submitted 22 January, 2010; originally announced January 2010.

Comments: in press Appl. Phys. Lett. 97, 1 (2010)

Journal ref: APPLIED PHYSICS LETTERS 97, 152111 (2010)

Controlling exchange bias in Co-CoOx nanoparticles by oxygen content

Authors: Miroslavna Kovylina, Montserrat Garcia del Muro, Zorica Konstantinovic, Manuel Varela, Oscar Iglesias, Amilcar Labarta, Xavier Batlle

Abstract: We report on the occurrence of exchange bias on laser-ablated granular thin films composed of Co nanoparticles embedded in amorphous zirconia matrix. The deposition method allows controlling the degree of oxidation of the Co particles by tuning the oxygen pressure at the vacuum chamber (from 2x10^{-5} to 10^{-1} mbar). The nature of the nanoparticles embedded in the nonmagnetic matrix is monitor… ▽ More We report on the occurrence of exchange bias on laser-ablated granular thin films composed of Co nanoparticles embedded in amorphous zirconia matrix. The deposition method allows controlling the degree of oxidation of the Co particles by tuning the oxygen pressure at the vacuum chamber (from 2x10^{-5} to 10^{-1} mbar). The nature of the nanoparticles embedded in the nonmagnetic matrix is monitored from metallic, ferromagnetic (FM) Co to antiferromagnetic (AFM) CoOx, with a FM/AFM intermediate regime for which the percentage of the AFM phase can be increased at the expense of the FM phase, leading to the occurrence of exchange bias in particles of about 2 nm in size. For oxygen pressure of about 10-3 mbar the ratio between the FM and AFM phases is optimum with an exchange bias field about 900 Oe at 1.8 K. The mutual exchange coupling between the AFM and FM is also at the origin of the induced exchange anisotropy on the FM leading to high irreversible hysteresis loops, and the blocking of the AFM clusters due to proximity to the FM phase. △ Less

Submitted 4 March, 2009; originally announced March 2009.

Comments: 12 pages, 8 figures. To be published in Nanotechnology

Thickness dependence of the exchange bias in epitaxial manganite bilayers

Authors: A. L. Kobrinskii, Maria Varela, S. J. Pennycook, A. M. Goldman

Abstract: Exchange bias has been studied in a series of La2/3Ca1/3MnO3 / La1/3Ca2/3MnO3 bilayers grown on (001) SrTiO3 substrates by ozone-assisted molecular beam epitaxy. The high crystalline quality of the samples and interfaces has been verified using high-resolution X-ray diffractometry and Z-contrast scanning transmission electron microscopy with electron energy loss spectroscopy. The dependence of e… ▽ More Exchange bias has been studied in a series of La2/3Ca1/3MnO3 / La1/3Ca2/3MnO3 bilayers grown on (001) SrTiO3 substrates by ozone-assisted molecular beam epitaxy. The high crystalline quality of the samples and interfaces has been verified using high-resolution X-ray diffractometry and Z-contrast scanning transmission electron microscopy with electron energy loss spectroscopy. The dependence of exchange bias on the thickness of the antiferromagnetic layer has been investigated. A critical value for the onset of the hysteresis loop shift has been determined. An antiferromagnetic anisotropy constant has been obtained by fitting the results to the generalized Meiklejohn-Bean model. △ Less

Submitted 18 September, 2008; v1 submitted 17 April, 2008; originally announced April 2008.

Comments: 7 pages. 8 figures