Showing 1–5 of 5 results for author: Yearwood, G R

A High-resolution Scintillating Fiber Tracker With Silicon Photomultiplier Array Readout

Authors: Bastian Beischer, Henning Gast, Roman Greim, Waclaw Karpinski, Thomas Kirn, Tatsuya Nakada, Gregorio Roper Yearwood, Stefan Schael, Michael Wlochal

Abstract: We present prototype modules for a tracking detector consisting of multiple layers of 0.25 mm diameter scintillating fibers that are read out by linear arrays of silicon photomultipliers. The module production process is described and measurements of the key properties for both the fibers and the readout devices are shown. Five modules have been subjected to a 12 GeV/c proton/pion testbeam at CERN… ▽ More We present prototype modules for a tracking detector consisting of multiple layers of 0.25 mm diameter scintillating fibers that are read out by linear arrays of silicon photomultipliers. The module production process is described and measurements of the key properties for both the fibers and the readout devices are shown. Five modules have been subjected to a 12 GeV/c proton/pion testbeam at CERN. A spatial resolution of 0.05 mm and light yields exceeding 20 detected photons per minimum ionizing particle have been achieved, at a tracking efficiency of more than 98.5%. Possible techniques for further improvement of the spatial resolution are discussed. △ Less

Submitted 31 October, 2010; originally announced November 2010.

Comments: 31 pages, 27 figures, pre-print version of an article published in Nuclear Instruments and Methods in Physics Research Section A, Vol. 622

Journal ref: Nucl.Instrum.Meth.A622:542-554,2010

Silicon photomultiplier arrays - a novel photon detector for a high resolution tracker produced at FBK-irst, Italy

Authors: R. Greim, H. Gast, T. Kirn, J. Olzem, G. Roper Yearwood, S. Schael, N. Zimmermann, G. Ambrosi, P. Azzarello, R. Battiston, C. Piemonte

Abstract: A silicon photomultiplier (SiPM) array has been developed at FBK-irst having 32 channels and a dimension of 8.0 x 1.1 mm^2. Each 250 um wide channel is subdivided into 5 x 22 rectangularly arranged pixels. These sensors are developed to read out a modular high resolution scintillating fiber tracker. Key properties like breakdown voltage, gain and photon detection efficiency (PDE) are found to be… ▽ More A silicon photomultiplier (SiPM) array has been developed at FBK-irst having 32 channels and a dimension of 8.0 x 1.1 mm^2. Each 250 um wide channel is subdivided into 5 x 22 rectangularly arranged pixels. These sensors are developed to read out a modular high resolution scintillating fiber tracker. Key properties like breakdown voltage, gain and photon detection efficiency (PDE) are found to be homogeneous over all 32 channels of an SiPM array. This could make scintillating fiber trackers with SiPM array readout a promising alternative to available tracker technologies, if noise properties and the PDE are improved. △ Less

Submitted 23 March, 2009; originally announced March 2009.

Journal ref: Nucl.Phys.Proc.Suppl.197:83-86,2009

A Scintillating Fiber Tracker With SiPM Readout

Authors: G. Roper Yearwood, B. Beischer, Ch. -H. Chung, Ph. v. Doetinchem, H. Gast, R. Greim, T. Kirn, S. Schael, N. Zimmermann, T. Nakada, G. Ambrosi, P. Azzarello, R. Battiston, C. Piemonte

Abstract: We present a prototype for the first tracking detector consisting of 250 micron thin scintillating fibers and silicon photomultiplier (SiPM) arrays. The detector has a modular design, each module consists of a mechanical support structure of 10mm Rohacell foam between two 100 micron thin carbon fiber skins. Five layers of scintillating fibers are glued to both top and bottom of the support struc… ▽ More We present a prototype for the first tracking detector consisting of 250 micron thin scintillating fibers and silicon photomultiplier (SiPM) arrays. The detector has a modular design, each module consists of a mechanical support structure of 10mm Rohacell foam between two 100 micron thin carbon fiber skins. Five layers of scintillating fibers are glued to both top and bottom of the support structure. SiPM arrays with a channel pitch of 250 micron are placed in front of the fibers. We show the results of the first module prototype using multiclad fibers of types Bicron BCF-20 and Kuraray SCSF-81M that were read out by novel 32-channel SiPM arrays from FBK-irst/INFN Perugia as well as 32-channel SiPM arrays produced by Hamamatsu. A spatial resolution of 88 micron +/- 6 micron at an average yield of 10 detected photons per minimal ionizig particle has been achieved. △ Less

Submitted 2 December, 2008; originally announced December 2008.

Comments: 5 pages, 7 figures, submitted as proceedings to the 11th Topical Seminar on Innovative Particle and Radiation Detectors (IPRD08)

Journal ref: Nucl.Phys.Proc.Suppl.197:245-249,2009

A high resolution scintillating fiber tracker with SiPM readout for the PEBS experiment

Authors: H. Gast, R. Greim, T. Kirn, G. Roper Yearwood, S. Schael

Abstract: Using thin scintillating fibers with Silicon Photomultiplier (SiPM) readout a mo dular high-resolution charged-particle tracking detector has been designed. The fiber modules consist of 2 x 5 layers of 128 round multiclad scintillating fiber s of 0.250mm diameter. The fibers are read out by four SiPM arrays (8mm x 1mm) e ach on either end of the module. Using thin scintillating fibers with Silicon Photomultiplier (SiPM) readout a mo dular high-resolution charged-particle tracking detector has been designed. The fiber modules consist of 2 x 5 layers of 128 round multiclad scintillating fiber s of 0.250mm diameter. The fibers are read out by four SiPM arrays (8mm x 1mm) e ach on either end of the module. △ Less

Submitted 29 November, 2007; originally announced November 2007.

Comments: 6 pages, 5 figures, presented at the ICATPP 10

A high resolution scintillating fiber tracker with SiPM readout

Authors: Henning Gast, Thomas Kirn, Gregorio Roper Yearwood, Stefan Schael

Abstract: A novel modular high-resolution charged-particle tracking detector design using $250μm$ diameter, round, scintillating fibers and SiPM arrays for readout is presented. The fiber modules consist of 8 layers of 128 fibers, mechanically sta bilized by a carbon fiber / Rohacell foam structure. A prototype using scintillating fibers with a diameter of $300μm$ and two typ es of silicon photomultiplier… ▽ More A novel modular high-resolution charged-particle tracking detector design using $250μm$ diameter, round, scintillating fibers and SiPM arrays for readout is presented. The fiber modules consist of 8 layers of 128 fibers, mechanically sta bilized by a carbon fiber / Rohacell foam structure. A prototype using scintillating fibers with a diameter of $300μm$ and two typ es of silicon photomultipliers has been tested in a $10GeV$ proton beam in late October 2006 at the T9 PS-beamline, CERN. We present the measured spatial resolu tion, efficiency and signal-over-noise for this setup. The advantage of this tra cker concept is a compact and modular design with low material budget and only little or no cooling requirements depending on the quality of the silicon photomultiplieres. △ Less

Submitted 15 March, 2007; originally announced March 2007.

Comments: 4 pages, 7 figures

Journal ref: Nucl.Instrum.Meth.A581:423-426,2007