Showing 1–50 of 57 results for author: Rubinsztein-Dunlop, H

Interrogating the Ballistic Regime in Liquids with Rotational Optical Tweezers

Authors: Mark L. Watson, Alexander B. Stilgoe, Itia A. Favre-Bulle, Halina Rubinsztein-Dunlop

Abstract: Accessing the ballistic regime of single particles in liquids remains an experimental challenge that shrouds our understanding of the particle-liquid interactions on exceedingly short time scales. We demonstrate the ballistic measurements of rotational probes to observe these interactions in the rotational regime within microscopic systems. This study uses sensitive high-bandwidth measurements of… ▽ More Accessing the ballistic regime of single particles in liquids remains an experimental challenge that shrouds our understanding of the particle-liquid interactions on exceedingly short time scales. We demonstrate the ballistic measurements of rotational probes to observe these interactions in the rotational regime within microscopic systems. This study uses sensitive high-bandwidth measurements of polarisation from light scattered by orientation-locked birefringent probes trapped within rotational optical tweezers. The particle-liquid interactions in the ballistic regime are decoupled from the optical potential allowing direct studies of single-particle rotational dynamics. This enabled us to determine the dissipation of rotational inertia and observe and validate rotational hydrodynamic effects in a previously inaccessible parameter space. Furthermore, the fast angular velocity thermalisation time enables calibration-free viscometry using less than 50ms of data. This methodology will provide a unique way of studying rotational hydrodynamic effects and enable ultra-fast microrheometry in systems out-of-equilibrium. △ Less

Submitted 14 November, 2024; originally announced November 2024.

Comments: 14 pages, 5 figures

Journal ref: Optica 12, 246-254 (2025)

Emergent Universal Drag Law in a Model of Superflow

Authors: M. T. M. Christenhusz, A. Safavi-Naini, H. Rubinsztein-Dunlop, T. W. Neely, M. T. Reeves

Abstract: Despite the fundamentally different dissipation mechanisms, many laws and phenomena of classical turbulence equivalently manifest in quantum turbulence. The Reynolds law of dynamical similarity states that two objects of same geometry across different length scales are hydrodynamically equivalent under the same Reynolds number, leading to a universal drag coefficient law. In this work we confirm t… ▽ More Despite the fundamentally different dissipation mechanisms, many laws and phenomena of classical turbulence equivalently manifest in quantum turbulence. The Reynolds law of dynamical similarity states that two objects of same geometry across different length scales are hydrodynamically equivalent under the same Reynolds number, leading to a universal drag coefficient law. In this work we confirm the existence of a universal drag law in a superfluid wake, facilitated by the nucleation of quantized vortices. We numerically study superfluid flow across a range of Reynolds numbers for the paradigmatic classical hard-wall and the Gaussian obstacle, popular in experimental quantum hydrodynamics. In addition, we provide a feasible method for measuring superfluid drag forces in an experimental environment using control volumes. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Comments: 6+2 pages, 3+2 figures, 1 table

Roadmap on Deep Learning for Microscopy

Authors: Giovanni Volpe, Carolina Wählby, Lei Tian, Michael Hecht, Artur Yakimovich, Kristina Monakhova, Laura Waller, Ivo F. Sbalzarini, Christopher A. Metzler, Mingyang Xie, Kevin Zhang, Isaac C. D. Lenton, Halina Rubinsztein-Dunlop, Daniel Brunner, Bijie Bai, Aydogan Ozcan, Daniel Midtvedt, Hao Wang, Nataša Sladoje, Joakim Lindblad, Jason T. Smith, Marien Ochoa, Margarida Barroso, Xavier Intes, Tong Qiu , et al. (50 additional authors not shown)

Abstract: Through digital imaging, microscopy has evolved from primarily being a means for visual observation of life at the micro- and nano-scale, to a quantitative tool with ever-increasing resolution and throughput. Artificial intelligence, deep neural networks, and machine learning are all niche terms describing computational methods that have gained a pivotal role in microscopy-based research over the… ▽ More Through digital imaging, microscopy has evolved from primarily being a means for visual observation of life at the micro- and nano-scale, to a quantitative tool with ever-increasing resolution and throughput. Artificial intelligence, deep neural networks, and machine learning are all niche terms describing computational methods that have gained a pivotal role in microscopy-based research over the past decade. This Roadmap is written collectively by prominent researchers and encompasses selected aspects of how machine learning is applied to microscopy image data, with the aim of gaining scientific knowledge by improved image quality, automated detection, segmentation, classification and tracking of objects, and efficient merging of information from multiple imaging modalities. We aim to give the reader an overview of the key developments and an understanding of possibilities and limitations of machine learning for microscopy. It will be of interest to a wide cross-disciplinary audience in the physical sciences and life sciences. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Controlled transfer of transverse optical angular momentum to optically trapped birefringent particles

Authors: Alexander B. Stilgoe, Timo A. Nieminen, Halina Rubinsztein-Dunlop

Abstract: We report on the observation and measurement of the transfer of transverse angular momentum to birefringent particles several wavelengths in size. A trapped birefringent particle is much larger than the nano-particles systems for which transverse angular momentum was previously investigated. The larger birefringent particle interacts more strongly with both the trapping beam and fluid surrounding… ▽ More We report on the observation and measurement of the transfer of transverse angular momentum to birefringent particles several wavelengths in size. A trapped birefringent particle is much larger than the nano-particles systems for which transverse angular momentum was previously investigated. The larger birefringent particle interacts more strongly with both the trapping beam and fluid surrounding it. This technique could be used to transfer transverse angular momentum for studies of diverse micro-systems. Thus, it can be used for investigation of the dynamics of complex fluids in 3D as well as for shear on cell mono-layers. The trapping of such a particle with highly focused light is complex and can lead to the emergence of effects such as spin--orbit coupling. We estimate the transfer of spin angular momentum using Stokes measurements. We outline the physics behind the construction of the beam used to control the particles, perform quantitative measurement of transverse spin angular momentum transfer, as well as demonstrate the generation of fluid flow around multiple rotation axes. △ Less

Submitted 8 August, 2021; originally announced August 2021.

Comments: 19 pages, 4 figures, pre-submission draft

Enhanced optical trapping via structured scattering

Authors: Michael A Taylor, Muhammad Waleed, Alexander B Stilgoe, Halina Rubinsztein-Dunlop, Warwick P Bowen

Abstract: Interferometry can completely redirect light, providing the potential for strong and controllable optical forces. However, small particles do not naturally act like interferometric beamsplitters, and the optical scattering from them is not generally thought to allow efficient interference. Instead, optical trapping is typically achieved via deflection of the incident field. Here we show that a sui… ▽ More Interferometry can completely redirect light, providing the potential for strong and controllable optical forces. However, small particles do not naturally act like interferometric beamsplitters, and the optical scattering from them is not generally thought to allow efficient interference. Instead, optical trapping is typically achieved via deflection of the incident field. Here we show that a suitably structured incident field can achieve beamsplitter-like interactions with scattering particles. The resulting trap offers order-of-magnitude higher stiffness than the usual Gaussian trap in one axis, even when constrained to phase-only structuring. We demonstrate trapping of 3.5 to 10.0~$μ$m silica spheres, achieving stiffness up to 27.5$\pm$4.1 times higher than is possible using Gaussian traps, and two orders of magnitude higher measurement signal-to-noise ratio. These results are highly relevant to many applications, including cellular manipulation, fluid dynamics, micro-robotics, and tests of fundamental physics. △ Less

Submitted 20 May, 2021; originally announced May 2021.

Journal ref: Nature Photonics 9, 669-673 (2015)

Ultrasensitive optical magnetometry at the microscale

Authors: Stefan Forstner, Eoin Sheridan, Joachim Knittel, Christopher L. Humphreys, George A. Brawley, Halina Rubinsztein-Dunlop, Warwick P. Bowen

Abstract: Recent advances in optical magnetometry have achieved record sensitivity at both macro- and nano-scale. Combined with high bandwidth and non-cryogenic operation, this has enabled many applications. By comparison, microscale optical magnetometers have been constrained to sensitivities five orders-of-magnitude worse than the state-of-the-art. Here, we report an ambient optical micro-magnetometer ope… ▽ More Recent advances in optical magnetometry have achieved record sensitivity at both macro- and nano-scale. Combined with high bandwidth and non-cryogenic operation, this has enabled many applications. By comparison, microscale optical magnetometers have been constrained to sensitivities five orders-of-magnitude worse than the state-of-the-art. Here, we report an ambient optical micro-magnetometer operating for the first time in the picoTesla range, a more than three order-of-magnitude advance on previous results. Unlike other ultrasensitive optical magnetometers, the device operates at earth field, achieves tens of MHz bandwidth, and is integrated and fiber coupled. Combined with 60 micrometer spatial resolution and microWatt optical power requirements, these unique capabilities open up a broad range of applications including cryogen-free and microfluidic magnetic resonance imaging, and electromagnetic interference-free investigation of spin physics in condensed matter systems such as semiconductors and ultracold atom clouds △ Less

Submitted 11 April, 2021; originally announced April 2021.

Journal ref: Adv Mat 26 (2014) 6348

Dynamic high-resolution optical trapping of ultracold atoms

Authors: Guillaume Gauthier, Thomas A. Bell, Alexander B. Stilgoe, Mark Baker, Halina Rubinsztein-Dunlop, Tyler W. Neely

Abstract: All light has structure, but only recently it has become possible to construct highly controllable and precise potentials so that most laboratories can harness light for their specific applications. In this chapter, we review the emerging techniques for high-resolution and configurable optical trapping of ultracold atoms. We focus on optical deflectors and spatial light modulators in the Fourier a… ▽ More All light has structure, but only recently it has become possible to construct highly controllable and precise potentials so that most laboratories can harness light for their specific applications. In this chapter, we review the emerging techniques for high-resolution and configurable optical trapping of ultracold atoms. We focus on optical deflectors and spatial light modulators in the Fourier and direct imaging configurations. These optical techniques have enabled significant progress in studies of superfluid dynamics, single-atom trapping, and underlie the emerging field of atomtronics. The chapter is intended as a complete guide to the experimentalist for understanding, selecting, and implementing the most appropriate optical trapping technology for a given application. After introducing the basic theory of optical trapping and image formation, we describe each of the above technologies in detail, providing a guide to the fundamental operation of optical deflectors, digital micromirror devices, and liquid crystal spatial light modulators. We also describe the capabilities of these technologies for manipulation of trapped ultracold atoms, where the potential is dynamically modified to enable experiments, and where time-averaged potentials can realise more complex traps. The key considerations when implementing time-averaged traps are described. △ Less

Submitted 18 March, 2021; originally announced March 2021.

Comments: 48 pages, 20 Figures

Turbulent relaxation to equilibrium in a two-dimensional quantum vortex gas

Authors: Matthew T. Reeves, Kwan Goddard-Lee, Guillaume Gauthier, Oliver R. Stockdale, Hayder Salman, Timothy Edmonds, Xiaoquan Yu, Ashton S. Bradley, Mark Baker, Halina Rubinsztein-Dunlop, Matthew J. Davis, Tyler W. Neely

Abstract: We experimentally study emergence of microcanonical equilibrium states in the turbulent relaxation dynamics of a two-dimensional chiral vortex gas. Same-sign vortices are injected into a quasi-two-dimensional disk-shaped atomic Bose-Einstein condensate using a range of mechanical stirring protocols. The resulting long-time vortex distributions are found to be in excellent agreement with the meanfi… ▽ More We experimentally study emergence of microcanonical equilibrium states in the turbulent relaxation dynamics of a two-dimensional chiral vortex gas. Same-sign vortices are injected into a quasi-two-dimensional disk-shaped atomic Bose-Einstein condensate using a range of mechanical stirring protocols. The resulting long-time vortex distributions are found to be in excellent agreement with the meanfield Poisson-Boltzmann equation for the system describing the microcanonical ensemble at fixed energy $\cal{H}$ and angular momentum $\cal{M}$. The equilibrium states are characterized by the corresponding thermodynamic variables of inverse temperature $\hatβ$ and rotation frequency $\hatω$. We are able to realize equilibria spanning the full phase diagram of the vortex gas, including on-axis states near zero-temperature, infinite temperature, and negative absolute temperatures. At sufficiently high energies the system exhibits a symmetry-breaking transition, resulting in an off-axis equilibrium phase at negative absolute temperature that no longer shares the symmetry of the container. We introduce a point-vortex model with phenomenological damping and noise that is able to quantitatively reproduce the equilibration dynamics. △ Less

Submitted 10 January, 2022; v1 submitted 20 October, 2020; originally announced October 2020.

Comments: V1: 16 pages, 7 figures, 6 in main text

Strong transient flows generated by thermoplasmonic bubble nucleation

Authors: Steven Jones, Daniel Andrén, Tomasz J. Antosiewicz, Alexander Stilgoe, Halina Rubinsztein-Dunlop, Mikael Käll

Abstract: The challenge of inducing and controlling localized fluid flows for generic force actuation and for achieving efficient mass transport in microfluidics is key to the development of next generation miniaturized systems for chemistry and life sciences. Here we demonstrate a methodology for the robust generation and precise quantification of extremely strong flow transients driven by vapor bubble nuc… ▽ More The challenge of inducing and controlling localized fluid flows for generic force actuation and for achieving efficient mass transport in microfluidics is key to the development of next generation miniaturized systems for chemistry and life sciences. Here we demonstrate a methodology for the robust generation and precise quantification of extremely strong flow transients driven by vapor bubble nucleation on spatially isolated plasmonic nanoantennas excited by light. The system is capable of producing peak flow speeds of the order mm/s at modulation rates up to 100 Hz in water, thus allowing for a variety of high-throughput applications. Analysis of flow dynamics and fluid viscosity dependence indicate that the transient originates in the rapid bubble expansion that follows nucleation rather than being strictly thermocapillary in nature. △ Less

Submitted 16 November, 2020; v1 submitted 3 September, 2020; originally announced September 2020.

Comments: Main Text: 11 pages, 4 figures Supporting Information: 9 pages, 8 figures. Revised manuscript: further details about experiment and analysis, corrected minor analysis error, further clarification of physical understanding

Machine learning reveals complex behaviours in optically trapped particles

Authors: Isaac C. D. Lenton, Giovanni Volpe, Alexander B. Stilgoe, Timo A. Nieminen, Halina Rubinsztein-Dunlop

Abstract: Since their invention in the 1980s [1], optical tweezers have found a wide range of applications, from biophotonics and mechanobiology to microscopy and optomechanics [2, 3, 4, 5]. Simulations of the motion of microscopic particles held by optical tweezers are often required to explore complex phenomena and to interpret experimental data [6, 7, 8, 9]. For the sake of computational efficiency, thes… ▽ More Since their invention in the 1980s [1], optical tweezers have found a wide range of applications, from biophotonics and mechanobiology to microscopy and optomechanics [2, 3, 4, 5]. Simulations of the motion of microscopic particles held by optical tweezers are often required to explore complex phenomena and to interpret experimental data [6, 7, 8, 9]. For the sake of computational efficiency, these simulations usually model the optical tweezers as an harmonic potential [10, 11]. However, more physically-accurate optical-scattering models [12, 13, 14, 15] are required to accurately model more onerous systems; this is especially true for optical traps generated with complex fields [16, 17, 18, 19]. Although accurate, these models tend to be prohibitively slow for problems with more than one or two degrees of freedom (DoF) [20], which has limited their broad adoption. Here, we demonstrate that machine learning permits one to combine the speed of the harmonic model with the accuracy of optical-scattering models. Specifically, we show that a neural network can be trained to rapidly and accurately predict the optical forces acting on a microscopic particle. We demonstrate the utility of this approach on two phenomena that are prohibitively slow to accurately simulate otherwise: the escape dynamics of swelling microparticles in an optical trap, and the rotation rates of particles in a superposition of beams with opposite orbital angular momenta. Thanks to its high speed and accuracy, this method can greatly enhance the range of phenomena that can be efficiently simulated and studied. △ Less

Submitted 17 April, 2020; originally announced April 2020.

Comments: 4 figures

OTSLM Toolbox for Structured Light Methods

Authors: Isaac C D Lenton, Alexander B Stilgoe, Timo A Nieminen, Halina Rubinsztein-Dunlop

Abstract: We present a new Matlab toolbox for generating phase and amplitude patterns for digital micro-mirror device (DMD) and liquid crystal (LC) based spatial light modulators (SLMs). This toolbox consists of a collection of algorithms commonly used for generating patterns for these devices with a focus on optical tweezers beam shaping applications. In addition to the algorithms provided, we have put tog… ▽ More We present a new Matlab toolbox for generating phase and amplitude patterns for digital micro-mirror device (DMD) and liquid crystal (LC) based spatial light modulators (SLMs). This toolbox consists of a collection of algorithms commonly used for generating patterns for these devices with a focus on optical tweezers beam shaping applications. In addition to the algorithms provided, we have put together a range of user interfaces for simplifying the use of these patterns. The toolbox currently has functionality to generate patterns which can be saved as a image or displayed on a device/screen using the supplied interface. We have only implemented interfaces for the devices our group currently uses but we believe that extending the code we provide to other devices should be fairly straightforward. The range of algorithms included in the toolbox is not exhaustive. However, by making the toolbox open sources and available on GitHub we hope that other researchers working with these devices will contribute their patterns/algorithms to the toolbox. △ Less

Submitted 17 February, 2020; originally announced February 2020.

Comments: 27 pages, 5 figures, program available from https://github.com/ilent2/otslm

Journal ref: Computer Physics Communications, 2020, 107199

Ultra-broadband and sensitive cavity optomechanical magnetometry

Authors: Bei-Bei Li, George Brawley, Hamish Greenall, Stefan Forstner, Eoin Sheridan, Halina Rubinsztein-Dunlop, Warwick P. Bowen

Abstract: Magnetostrictive optomechanical cavities provide a new optically-readout approach to room temperature magnetometry. Here we report ultrasensitive and ultrahigh bandwidth cavity optomechanical magnetometers constructed by embedding a grain of the magnetostrictive material Terfenol-D within a high quality (Q) optical microcavity on a silicon chip. By engineering their physical structure, we achieve… ▽ More Magnetostrictive optomechanical cavities provide a new optically-readout approach to room temperature magnetometry. Here we report ultrasensitive and ultrahigh bandwidth cavity optomechanical magnetometers constructed by embedding a grain of the magnetostrictive material Terfenol-D within a high quality (Q) optical microcavity on a silicon chip. By engineering their physical structure, we achieve a peak sensitivity of 26 pT/Hz^1/2 comparable to the best cryogenic microscale magnetometers, along with a 3~dB bandwidth as high as 11.3 MHz. Two classes of magnetic response are observed, which we postulate arise from the crystallinity of the Terfenol-D. This allows single- and poly-crystalline grains to be distinguished at the level of a single particle. Our results may enable applications such as lab-on-chip nuclear magnetic spectroscopy and magnetic navigation. △ Less

Submitted 22 January, 2020; originally announced February 2020.

Journal ref: Photonics Research 8, 1064-1071 (2020)

Orientation of Swimming Cells with Annular Beam Optical Tweezers

Authors: Isaac C. D. Lenton, Declan J. Armstrong, Alexander B. Stilgoe, Timo A. Nieminen, Halina Rubinsztein-Dunlop

Abstract: Optical tweezers are a versatile tool that can be used to manipulate small particles including both motile and non-motile bacteria and cells. The orientation of a non-spherical particle within a beam depends on the shape of the particle and the shape of the light field. By using multiple beams, sculpted light fields or dynamically changing beams, it is possible to control the orientation of certai… ▽ More Optical tweezers are a versatile tool that can be used to manipulate small particles including both motile and non-motile bacteria and cells. The orientation of a non-spherical particle within a beam depends on the shape of the particle and the shape of the light field. By using multiple beams, sculpted light fields or dynamically changing beams, it is possible to control the orientation of certain particles. In this paper we discuss the orientation of the rod-shaped bacteria Escherichia coli (E. coli) using dynamically shifting annular beam optical tweezers. We begin with examples of different beams used for the orientation of rod-shaped particles. We discuss the differences between orientation of motile and non-motile particles, and explore annular beams and the circumstances when they may be beneficial for manipulation of non-spherical particles or cells. Using simulations we map out the trajectory the E. coli takes. Estimating the trap stiffness along the trajectory gives us an insight into how stable an intermediate rotation is with respect to the desired orientation. Using this method, we predict and experimentally verify the change in the orientation of motile E. coli from vertical to near-horizontal with only one intermediate step. The method is not specific to exploring the orientation of particles and could be easily extended to quantify the stability of an arbitrary particle trajectory. △ Less

Submitted 13 November, 2019; originally announced November 2019.

Journal ref: Optics Communications, 2019, 124864, ISSN 0030-4018

Wall effects of eccentric spheres machine learning for convenient computation

Authors: Lachlan J. Gibson, Shu Zhang, Alexander B. Stilgoe, Timo A. Nieminen, Halina Rubinsztein-Dunlop

Abstract: In confined systems, such as the inside of a biological cell, the outer boundary or wall can affect the dynamics of internal particles. In many cases of interest both the internal particle and outer wall are approximately spherical. Therefore, quantifying the wall effects from an outer spherical boundary on the motion of an internal eccentric sphere is very useful. However, when the two spheres ar… ▽ More In confined systems, such as the inside of a biological cell, the outer boundary or wall can affect the dynamics of internal particles. In many cases of interest both the internal particle and outer wall are approximately spherical. Therefore, quantifying the wall effects from an outer spherical boundary on the motion of an internal eccentric sphere is very useful. However, when the two spheres are not concentric, the problem becomes non-trivial. In this paper we improve existing analytical methods to evaluate these wall effects and then train a feed-forward artificial neural network within a broader model. The final model generally performed with $\sim 0.001\%$ error within the training domain and $\sim 0.05\%$ when the outer spherical wall was extrapolated to an infinite plane. Through this model, the wall effects of an outer spherical boundary on the arbitrary motion of an internal sphere for all experimentally achievable configurations can now be conveniently and efficiently determined. △ Less

Submitted 3 March, 2019; originally announced March 2019.

Comments: 35 pages, 8 figures

Journal ref: Phys. Rev. E 99, 043304 (2019)

On-chip scalable optomechanical magnetometers

Authors: Bei-Bei Li, Douglas Bulla, Varun Prakash, Stefan Forstner, Ali Dehghan-Manshadi, Halina Rubinsztein-Dunlop, Scott Foster, Warwick P. Bowen

Abstract: The dual-resonant enhancement of mechanical and optical response in cavity optomechanical magnetometers enables precision sensing of magnetic fields. In previous working prototypes of such magnetometers, a cavity optomechanical system is functionalized by manually epoxy-bonding a grain of magnetostrictive material. While this approach allows proof-of-principle demonstrations, practical application… ▽ More The dual-resonant enhancement of mechanical and optical response in cavity optomechanical magnetometers enables precision sensing of magnetic fields. In previous working prototypes of such magnetometers, a cavity optomechanical system is functionalized by manually epoxy-bonding a grain of magnetostrictive material. While this approach allows proof-of-principle demonstrations, practical applications require more scalable and reproducible fabrication pathways. In this work, we scalably fabricate optomechanical magnetometers on a silicon chip, with reproducible performance across different devices, by sputter coating a magnetostrictive film onto high quality toroidal microresonators. Furthermore, we demonstrate that thermally annealing the sputtered film can improve the magnetometer sensitivity by a factor of 6.3. A peak sensitivity of 585 pT/Hz^1/2 is achieved, which is comparable with previously reported results using epoxy-bonding. △ Less

Submitted 25 May, 2018; v1 submitted 24 May, 2018; originally announced May 2018.

Comments: 6 pages, 5 figures

Journal ref: APL Photonics, 3, 120806 (2018)

Phase and micromotion of Bose-Einstein condensates in a time-averaged ring trap

Authors: Thomas A. Bell, Guillaume Gauthier, Tyler W. Neely, Halina Rubinsztein-Dunlop, Matthew J. Davis, Mark A. Baker

Abstract: Rapidly scanning magnetic and optical dipole traps have been widely utilised to form time-averaged potentials for ultracold quantum gas experiments. Here we theoretically and experimentally characterise the dynamic properties of Bose-Einstein condensates in ring-shaped potentials that are formed by scanning an optical dipole beam in a circular trajectory. We find that unidirectional scanning leads… ▽ More Rapidly scanning magnetic and optical dipole traps have been widely utilised to form time-averaged potentials for ultracold quantum gas experiments. Here we theoretically and experimentally characterise the dynamic properties of Bose-Einstein condensates in ring-shaped potentials that are formed by scanning an optical dipole beam in a circular trajectory. We find that unidirectional scanning leads to a non-trivial phase profile of the condensate that can be approximated analytically using the concept of phase imprinting. While the phase profile is not accessible through in-trap imaging, time-of-flight expansion manifests clear density signatures of an in-trap phase step in the condensate, coincident with the instantaneous position of the scanning beam. The phase step remains significant even when scanning the beam at frequencies two orders of magnitude larger than the characteristic frequency of the trap. We map out the phase and density properties of the condensate in the scanning trap, both experimentally and using numerical simulations, and find excellent agreement. Furthermore, we demonstrate that bidirectional scanning eliminated the phase gradient, rendering the system more suitable for coherent matter wave interferometry. △ Less

Submitted 15 February, 2018; originally announced February 2018.

Comments: 10 pages, 7 figures

Journal ref: Phys. Rev. A 98, 013604 (2018)

Modelling of cavity optomechanical magnetometers

Authors: Yimin Yu, Stefan Forstner, Halina Rubinsztein-Dunlop, Warwick P. Bowen

Abstract: Cavity optomechanical magnetic field sensors, constructed by coupling a magnetostrictive material to a micro-toroidal optical cavity, act as ultra-sensitive room temperature magnetometers with tens of micrometre size and broad bandwidth, combined with a simple operating scheme. Here, we develop a general recipe for predicting the field sensitivity of these devices. Several geometries are analysed,… ▽ More Cavity optomechanical magnetic field sensors, constructed by coupling a magnetostrictive material to a micro-toroidal optical cavity, act as ultra-sensitive room temperature magnetometers with tens of micrometre size and broad bandwidth, combined with a simple operating scheme. Here, we develop a general recipe for predicting the field sensitivity of these devices. Several geometries are analysed, with a highest predicted sensitivity of 180~p$\textrm{T}/\sqrt{\textrm{Hz}}$ at 28~$μ$m resolution limited by thermal noise in good agreement with previous experimental observations. Furthermore, by adjusting the composition of the magnetostrictive material and its annealing process, a sensitivity as good as 20~p$\textrm{T}/\sqrt{\textrm{Hz}}$ may be possible at the same resolution. This method paves a way for future design of magnetostrictive material based optomechanical magnetometers, possibly allowing both scalar and vectorial magnetometers. △ Less

Submitted 14 May, 2018; v1 submitted 10 February, 2018; originally announced February 2018.

Comments: 13 pages, 7 figures; manuscript contributed to the Special Issue Sensors Based on Quantum Phenomena

Journal ref: Sensors 2018, 18(5), 1558

Giant Vortex Clusters in a Two-Dimensional Quantum Fluid

Authors: Guillaume Gauthier, Matthew T. Reeves, Xiaoquan Yu, Ashton S. Bradley, Mark Baker, Thomas A. Bell, Halina Rubinsztein-Dunlop, Matthew J. Davis, Tyler W. Neely

Abstract: Adding energy to a system through transient stirring usually leads to more disorder. In contrast, point-like vortices in a bounded two-dimensional fluid are predicted to reorder above a certain energy, forming persistent vortex clusters. Here we realize experimentally these vortex clusters in a planar superfluid: a $^{87}$Rb Bose-Einstein condensate confined to an elliptical geometry. We demonstra… ▽ More Adding energy to a system through transient stirring usually leads to more disorder. In contrast, point-like vortices in a bounded two-dimensional fluid are predicted to reorder above a certain energy, forming persistent vortex clusters. Here we realize experimentally these vortex clusters in a planar superfluid: a $^{87}$Rb Bose-Einstein condensate confined to an elliptical geometry. We demonstrate that the clusters persist for long times, maintaining the superfluid system in a high energy state far from global equilibrium. Our experiments explore a regime of vortex matter at negative absolute temperatures, and have relevance to the dynamics of topological defects, two-dimensional turbulence, and systems such as helium films, nonlinear optical materials, fermion superfluids, and quark-gluon plasmas. △ Less

Submitted 16 January, 2020; v1 submitted 21 January, 2018; originally announced January 2018.

Comments: 14 pages, 4 Figures, 9 Supplemental Figures. The definitive version of this article was published in Science Vol. 364, Issue 6447, pp. 1264-1267, 28 Jun 2019. doi:10.1126/science.aat5718

Journal ref: Science Vol. 364, Issue 6447, pp. 1264-1267, 28 Jun 2019

Theory and practice of simulation of optical tweezers

Authors: Ann A. M. Bui, Alexander B. Stilgoe, Isaac C. D. Lenton, Lachlan J. Gibson, Anatolii V. Kashchuk, Shu Zhang, Halina Rubinsztein-Dunlop, Timo A. Nieminen

Abstract: Computational modelling has made many useful contributions to the field of optical tweezers. One aspect in which it can be applied is the simulation of the dynamics of particles in optical tweezers. This can be useful for systems with many degrees of freedom, and for the simulation of experiments. While modelling of the optical force is a prerequisite for simulation of the motion of particles in o… ▽ More Computational modelling has made many useful contributions to the field of optical tweezers. One aspect in which it can be applied is the simulation of the dynamics of particles in optical tweezers. This can be useful for systems with many degrees of freedom, and for the simulation of experiments. While modelling of the optical force is a prerequisite for simulation of the motion of particles in optical traps, non-optical forces must also be included; the most important are usually Brownian motion and viscous drag. We discuss some applications and examples of such simulations. We review the theory and practical principles of simulation of optical tweezers, including the choice of method of calculation of optical force, numerical solution of the equations of motion of the particle, and finish with a discussion of a range of open problems. △ Less

Submitted 20 August, 2017; originally announced August 2017.

Comments: 12 pages, 5 figures

Journal ref: Journal of Quantitative Spectroscopy and Radiative Transfer 195, 66-75 (2017)

Visual guide to optical tweezers

Authors: Isaac C. D. Lenton, Alexander B. Stilgoe, Halina Rubinsztein-Dunlop, Timo A. Nieminen

Abstract: It is common to introduce optical tweezers using either geometric optics for large particles or the Rayleigh approximation for very small particles. These approaches are successful at conveying the key ideas behind optical tweezers in their respective regimes. However, they are insufficient for modelling particles of intermediate size and large particles with small features. For this, a full field… ▽ More It is common to introduce optical tweezers using either geometric optics for large particles or the Rayleigh approximation for very small particles. These approaches are successful at conveying the key ideas behind optical tweezers in their respective regimes. However, they are insufficient for modelling particles of intermediate size and large particles with small features. For this, a full field approach provides greater insight into the mechanisms involved in trapping. The advances in computational capability over the last decade has led to better modelling and understanding of optical tweezers. Problems that were previously difficult to model computationally can now be solved using a variety of methods on modern systems. These advances in computational power allow for full field solutions to be visualised, leading to increased understanding of the fields and behaviour in various scenarios. In this paper we describe the operation of optical tweezers using full field simulations calculated using the finite difference time domain method. We use these simulations to visually illustrate various situations relevant to optical tweezers, from the basic operation of optical tweezers, to engineered particles and evanescent fields. △ Less

Submitted 15 August, 2017; originally announced August 2017.

Comments: 17 pages. 11 figures

Journal ref: European Journal of Physics 38(3), 034009 (2017)

Active rotational and translational microrheology beyond the linear spring regime

Authors: Lachlan J. Gibson, Shu Zhang, Alexander B. Stilgoe, Timo A. Nieminen, Halina Rubinsztein-Dunlop

Abstract: Active particle tracking microrheometers have the potential to perform accurate broad-band measurements of viscoelasticity within microscopic systems. Generally, their largest possible precision is limited by Brownian motion and low frequency changes to the system. The signal to noise ratio is usually improved by increasing the size of the driven motion compared to the Brownian as well as averagin… ▽ More Active particle tracking microrheometers have the potential to perform accurate broad-band measurements of viscoelasticity within microscopic systems. Generally, their largest possible precision is limited by Brownian motion and low frequency changes to the system. The signal to noise ratio is usually improved by increasing the size of the driven motion compared to the Brownian as well as averaging over repeated measurements. New theory is presented here which gives the complex shear modulus when the motion of a spherical particle is driven by non-linear forces. In some scenarios error can be further reduced by applying a variable transformation which linearises the equation of motion. This allows normalisation which eliminates low frequency drift in the particle's equilibrium position. Using this method will easily increase the signal strength enough to significantly reduce the measurement time for the same error. Thus the method is more conducive to measuring viscoelasticity in slowly changing microscopic systems, such as a living cell. △ Less

Submitted 13 August, 2017; v1 submitted 22 December, 2016; originally announced December 2016.

Comments: 9 pages, 2 figures

Journal ref: Physical Review E 95, 042608 (2017)

Non-destructive profilometry of optical nanofibres

Authors: Lars S. Madsen, Christopher Baker, Halina Rubinsztein-Dunlop, Warwick P. Bowen

Abstract: Single-mode optical nanofibres are a central component of a broad range of applications and emerging technologies. Their fabrication has been extensively studied over the past decade, but imaging of the final sub-micrometre products has been restricted to destructive or low-precision techniques. Here we demonstrate an optical scattering-based scanning method that uses a probe nanofibre to locally… ▽ More Single-mode optical nanofibres are a central component of a broad range of applications and emerging technologies. Their fabrication has been extensively studied over the past decade, but imaging of the final sub-micrometre products has been restricted to destructive or low-precision techniques. Here we demonstrate an optical scattering-based scanning method that uses a probe nanofibre to locally scatter the evanescent field of a sample nanofibre. The method does not damage the sample nanofibre and is easily implemented only using the same equipment as in a standard fibre puller setup. We demonstrate sub-nanometre radial resolution at video rates (0.7 nm in 10 ms) on single mode nanofibres, allowing for a complete high-precision profile to be obtained within minutes of fabrication. The method thus enables non-destructive, fast and precise characterisation of optical nanofibers, with applications ranging from optical sensors and cold atom traps to non-linear optics. △ Less

Submitted 6 October, 2016; v1 submitted 13 June, 2016; originally announced June 2016.

Bose-Einstein condensation in large time-averaged optical ring potentials

Authors: Thomas A. Bell, Jake A. P. Glidden, Leif Humbert, Michael W. J. Bromley, Simon A. Haine, Matthew J. Davis, Tyler W. Neely, Mark A. Baker, Halina Rubinsztein-Dunlop

Abstract: Interferometric measurements with matter waves are established techniques for sensitive gravimetry, rotation sensing, and measurement of surface interactions, but compact interferometers will require techniques based on trapped geometries. In a step towards the realization of matter wave interferometers in toroidal geometries, we produce a large, smooth ring trap for Bose-Einstein condensates usin… ▽ More Interferometric measurements with matter waves are established techniques for sensitive gravimetry, rotation sensing, and measurement of surface interactions, but compact interferometers will require techniques based on trapped geometries. In a step towards the realization of matter wave interferometers in toroidal geometries, we produce a large, smooth ring trap for Bose-Einstein condensates using rapidly scanned time-averaged dipole potentials. The trap potential is smoothed by using the atom distribution as input to an optical intensity correction algorithm. Smooth rings with a diameter up to 300 $μ$m are demonstrated. We experimentally observe and simulate the dispersion of condensed atoms in the resulting potential, with good agreement serving as an indication of trap smoothness. Under time of flight expansion we observe low energy excitations in the ring, which serves to constrain the lower frequency limit of the scanned potential technique. The resulting ring potential will have applications as a waveguide for atom interferometry and studies of superfluidity. △ Less

Submitted 6 July, 2016; v1 submitted 16 December, 2015; originally announced December 2015.

Journal ref: New J. Phys. 18, 035003 (2016)

Optomechanical magnetometry with a macroscopic resonator

Authors: Changqiu Yu, Jiri Janousek, Eoin Sheridan, David L. McAuslan, Halina Rubinsztein-Dunlop, Ping Koy Lam, Yundong Zhang, Warwick P. Bowen

Abstract: We demonstrate a centimeter-scale optomechanical magnetometer based on a crystalline whispering gallery mode resonator. The large size of the resonator allows high magnetic field sensitivity to be achieved in the hertz to kilohertz frequency range. A peak sensitivity of 131 pT per root Hz is reported, in a magnetically unshielded non-cryogenic environment and using optical power levels beneath 100… ▽ More We demonstrate a centimeter-scale optomechanical magnetometer based on a crystalline whispering gallery mode resonator. The large size of the resonator allows high magnetic field sensitivity to be achieved in the hertz to kilohertz frequency range. A peak sensitivity of 131 pT per root Hz is reported, in a magnetically unshielded non-cryogenic environment and using optical power levels beneath 100 microWatt. Femtotesla range sensitivity may be possible in future devices with further optimization of laser noise and the physical structure of the resonator, allowing applications in high-performance magnetometry. △ Less

Submitted 3 October, 2015; originally announced October 2015.

Journal ref: Phys. Rev. Applied 5, 044007 (2016)

Cavity Optomechanical Magnetometer

Authors: S. Forstner, S. Prams, J. Knittel, E. D. van Ooijen, J. D. Swaim, G. I. Harris, A. Szorkovszky, W. P. Bowen, H. Rubinsztein-Dunlop

Abstract: A cavity optomechanical magnetometer is demonstrated where the magnetic field induced expansion of a magnetostrictive material is transduced onto the physical structure of a highly compliant optical microresonator. The resulting motion is read out optically with ultra-high sensitivity. Detecting the magnetostrictive deformation of Terfenol-D with a toroidal whispering gallery mode (TWGM) resonator… ▽ More A cavity optomechanical magnetometer is demonstrated where the magnetic field induced expansion of a magnetostrictive material is transduced onto the physical structure of a highly compliant optical microresonator. The resulting motion is read out optically with ultra-high sensitivity. Detecting the magnetostrictive deformation of Terfenol-D with a toroidal whispering gallery mode (TWGM) resonator a peak sensitivity of 400 nT/Hz^.5 was achieved with theoretical modelling predicting that sensitivities of up to 500 fT/Hz^.5 may be possible. This chip-based magnetometer combines high-sensitivity and large dynamic range with small size and room temperature operation. △ Less

Submitted 21 February, 2012; v1 submitted 11 October, 2011; originally announced October 2011.

Constraining Validity of the Minkowski Energy-Momentum Tensor

Authors: R. N. C. Pfeifer, T. A. Nieminen, N. R. Heckenberg, H. Rubinsztein-Dunlop

Abstract: There exist two popular energy-momentum tensors for an electromagnetic wave in a dielectric medium. The Abraham expression is robust to experimental verification but more mathematically demanding, while the Minkowski expression is the foundation of a number of simplifications commonly found within the literature, including the relative refractive index transformation often used in modelling opti… ▽ More There exist two popular energy-momentum tensors for an electromagnetic wave in a dielectric medium. The Abraham expression is robust to experimental verification but more mathematically demanding, while the Minkowski expression is the foundation of a number of simplifications commonly found within the literature, including the relative refractive index transformation often used in modelling optical tweezers. These simplifications are based on neglecting the Minkowski tensor's material counterpart, a process known to be incompatible with conservation of angular momentum, and in conflict with experimental results, yet they are very successful in a wide range of circumstances. This paper combines existing constraints on their usage with recent theoretical analysis to obtain a list of conditions which much be satisfied to safely use the simplified Minkowski approach. Applying these conditions to an experiment proposed by Padgett et al., we find their prediction in agreement with that obtained using the total energy-momentum tensor. △ Less

Submitted 22 February, 2009; v1 submitted 16 February, 2009; originally announced February 2009.

Comments: 8 pages, RevTeX 4. Removed an erroneous factor of mu/mu_0 from Eq.(1)

Journal ref: Physical Review A 79(2), 023813 (2009)

T-matrix calculation via discrete-dipole approximation, point matching and exploiting symmetry

Authors: Vincent L. Y. Loke, Timo A. Nieminen, N. R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: We present a method of incorporating the discrete dipole approximation (DDA) method with the point matching method to formulate the T-matrix for modeling arbitrarily shaped micro-sized objects. The \emph{T}-matrix elements are calculated using point matching between fields calculated using vector spherical wave functions and DDA. When applied to microrotors, their discrete rotational and mirror… ▽ More We present a method of incorporating the discrete dipole approximation (DDA) method with the point matching method to formulate the T-matrix for modeling arbitrarily shaped micro-sized objects. The \emph{T}-matrix elements are calculated using point matching between fields calculated using vector spherical wave functions and DDA. When applied to microrotors, their discrete rotational and mirror symmetries can be exploited to reduce memory usage and calculation time by orders of magnitude; a number of optimization methods can be employed based on the knowledge of the relationship between the azimuthal mode and phase at each discrete rotational point, and mode redundancy from Floquet's theorem. A 'reduced-mode' T-matrix can also be calculated if the illumination conditions are known. △ Less

Submitted 10 December, 2008; originally announced December 2008.

Comments: 22 pages

Symmetry and the generation and measurement of optical torque

Authors: Timo A. Nieminen, Theodor Asavei, Vincent L. Y. Loke, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: A key element in the generation of optical torque in optical traps, which occurs when electromagnetic angular momentum is transferred from the trapping beam to the trapped particle by scattering, is the symmetries of the scattering particle and the trapping beam. We discuss the effect of such symmetries on the generation and measurement of optical torque in optical tweezers, and some consequent… ▽ More A key element in the generation of optical torque in optical traps, which occurs when electromagnetic angular momentum is transferred from the trapping beam to the trapped particle by scattering, is the symmetries of the scattering particle and the trapping beam. We discuss the effect of such symmetries on the generation and measurement of optical torque in optical tweezers, and some consequent general principles for the design of optically-driven micromachines. △ Less

Submitted 10 December, 2008; originally announced December 2008.

Comments: 28 pages

Fabrication of micro-structures for optically driven micromachines using two-photon photopolymerization of UV curing resins

Authors: Theodor Asavei, Timo A. Nieminen, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: Two-photon photopolymerization of UV curing resins is an attractive method for the fabrication of microscopic transparent objects with size in the tens of micrometers range. We have been using this method to produce three-dimensional structures for optical micromanipulation, in an optical system based on a femtosecond laser. By carefully adjusting the laser power and the exposure time we were ab… ▽ More Two-photon photopolymerization of UV curing resins is an attractive method for the fabrication of microscopic transparent objects with size in the tens of micrometers range. We have been using this method to produce three-dimensional structures for optical micromanipulation, in an optical system based on a femtosecond laser. By carefully adjusting the laser power and the exposure time we were able to create micro-objects with well-defined 3D features and with resolution below the diffraction limit of light. We discuss the performance and capabilities of a microfabrication system, with some examples of its products. △ Less

Submitted 30 October, 2008; originally announced October 2008.

Comments: 12 pages, 10 figures

Versatile two-dimensional potentials for ultra-cold atoms

Authors: S. K. Schnelle, E. D. van Ooijen, M. J. Davis, N. R. Heckenberg, H. Rubinsztein-Dunlop

Abstract: We propose and investigate a technique for generating smooth two-dimensional potentials for ultra-cold atoms based on the rapid scanning of a far-detuned laser beam using a two-dimensional acousto-optical modulator (AOM). We demonstrate the implementation of a feed-forward mechanism for fast and accurate control of the spatial intensity of the laser beam, resulting in improved homogeneity for th… ▽ More We propose and investigate a technique for generating smooth two-dimensional potentials for ultra-cold atoms based on the rapid scanning of a far-detuned laser beam using a two-dimensional acousto-optical modulator (AOM). We demonstrate the implementation of a feed-forward mechanism for fast and accurate control of the spatial intensity of the laser beam, resulting in improved homogeneity for the atom trap. This technique could be used to generate a smooth toroidal trap that would be useful for static and dynamic experiments on superfluidity and persistent currents with ultra-cold atoms. △ Less

Submitted 17 January, 2008; originally announced January 2008.

Comments: 8 pages, 5 figures

Picolitre viscometry using optically rotated particles

Authors: Simon J. Parkin, Gregor Knoener, Timo A. Nieminen, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: Important aspects in the field of microrheology are the studies of the viscosity of fluids within structures with micron dimensions and fluid samples where only microlitre volumes are available. We have quantitatively investigated the performance and accuracy of a microviscometer based on rotating optical tweezers, that requires as little as one microlitre of sample. We have characterised our mi… ▽ More Important aspects in the field of microrheology are the studies of the viscosity of fluids within structures with micron dimensions and fluid samples where only microlitre volumes are available. We have quantitatively investigated the performance and accuracy of a microviscometer based on rotating optical tweezers, that requires as little as one microlitre of sample. We have characterised our microviscometer, including effects due to heating, and demonstrated its ability to perform measurements over a large dynamic range of viscosities (at least two orders of magnitude). We have also inserted a probe particle through the membrane of a cell and measured the viscosity of the intramembranous contents. Viscosity measurements of tears have also been made with our microviscometer, which demonstrate its potential use to study un-stimulated eye fluid. △ Less

Submitted 1 November, 2007; originally announced November 2007.

Comments: 5 pages, 7 figures

Journal ref: Phys.Rev.E76:041507,2007

Momentum of an electromagnetic wave in dielectric media

Authors: Robert N. C. Pfeifer, Timo A. Nieminen, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: Almost a hundred years ago, two different expressions were proposed for the energy--momentum tensor of an electromagnetic wave in a dielectric. Minkowski's tensor predicted an increase in the linear momentum of the wave on entering a dielectric medium, whereas Abraham's tensor predicted its decrease. Theoretical arguments were advanced in favour of both sides, and experiments proved incapable of… ▽ More Almost a hundred years ago, two different expressions were proposed for the energy--momentum tensor of an electromagnetic wave in a dielectric. Minkowski's tensor predicted an increase in the linear momentum of the wave on entering a dielectric medium, whereas Abraham's tensor predicted its decrease. Theoretical arguments were advanced in favour of both sides, and experiments proved incapable of distinguishing between the two. Yet more forms were proposed, each with their advocates who considered the form that they were proposing to be the one true tensor. This paper reviews the debate and its eventual conclusion: that no electromagnetic wave energy--momentum tensor is complete on its own. When the appropriate accompanying energy--momentum tensor for the material medium is also considered, experimental predictions of all the various proposed tensors will always be the same, and the preferred form is therefore effectively a matter of personal choice. △ Less

Submitted 22 February, 2009; v1 submitted 2 October, 2007; originally announced October 2007.

Comments: 23 pages, 3 figures, RevTeX 4. Removed erroneous factor of mu/mu_0 from Eq.(44)

Journal ref: Rev.Mod.Phys.79:1197-1216,2007; Erratum-ibid.81:443,2009

Refractometry of organosilica microspheres

Authors: Katrina Y. T. Seet, Robert Vogel, Timo A. Nieminen, Gregor Knoener, Halina Rubinsztein-Dunlop, Matt Trau, Andrei V. Zvyagin

Abstract: The refractive index of novel organosilica (nano/micro)material is determined using two methods. The first method is based on analysis of optical extinction efficiency of organosilica beads versus wavelength, which is obtained by a standard laboratory spectrometer. The second method relies on the measurable trapping potential of these beads in the focused light beam (laser tweezers). Polystyrene… ▽ More The refractive index of novel organosilica (nano/micro)material is determined using two methods. The first method is based on analysis of optical extinction efficiency of organosilica beads versus wavelength, which is obtained by a standard laboratory spectrometer. The second method relies on the measurable trapping potential of these beads in the focused light beam (laser tweezers). Polystyrene beads were used to test these methods, and the determined dispersion curves of refractive index values have been found accurate. The refractive index of organosilica beads has been determined to range from 1.60-1.51 over the wavelength range of 300-1100 nm. △ Less

Submitted 6 March, 2007; originally announced March 2007.

Comments: 9 pages, 8 figures

Journal ref: Applied Optics 46(9), 1554-1561 (2007)

Forces from highly focused laser beams: modeling, measurement and application to refractive index measurements

Authors: G. Knoener, S. Parkin, T. A. Nieminen, N. R. Heckenberg, H. Rubinsztein-Dunlop

Abstract: The optical forces in optical tweezers can be robustly modeled over a broad range of parameters using generalsed Lorenz-Mie theory. We describe the procedure, and show how the combination of experimental measurement of properties of the trap coupled with computational modeling, can allow unknown parameters of the particle - in this case, the refractive index - to be determined. The optical forces in optical tweezers can be robustly modeled over a broad range of parameters using generalsed Lorenz-Mie theory. We describe the procedure, and show how the combination of experimental measurement of properties of the trap coupled with computational modeling, can allow unknown parameters of the particle - in this case, the refractive index - to be determined. △ Less

Submitted 5 February, 2007; originally announced February 2007.

Comments: 5 pages, 4 figures, presented at 17th AIP Congress, Brisbane, 2006

Journal ref: in R. Sang and J. Dobson (eds), Australian Institute of Physics (AIP) 17th National Congress 2006: Refereed Papers, (Australian Institute of Physics, 2006) [CD-ROM, unpaginated]

Nanotrapping and the thermodynamics of optical tweezers

Authors: W. Singer, T. A. Nieminen, N. R. Heckenberg, H. Rubinsztein-Dunlop

Abstract: Particles that can be trapped in optical tweezers range from tens of microns down to tens of nanometres in size. Interestingly, this size range includes large macromolecules. We show experimentally, in agreement with theoretical expectations, that optical tweezers can be used to manipulate single molecules of polyethylene oxide suspended in water. The trapped molecules accumulate without aggrega… ▽ More Particles that can be trapped in optical tweezers range from tens of microns down to tens of nanometres in size. Interestingly, this size range includes large macromolecules. We show experimentally, in agreement with theoretical expectations, that optical tweezers can be used to manipulate single molecules of polyethylene oxide suspended in water. The trapped molecules accumulate without aggregating, so this provides optical control of the concentration of macromolecules in solution. Apart from possible applications such as the micromanipulation of nanoparticles, nanoassembly, microchemistry, and the study of biological macromolecules, our results also provide insight into the thermodynamics of optical tweezers. △ Less

Submitted 5 February, 2007; originally announced February 2007.

Comments: 5 pages, 3 figures, presented at 17th AIP Congress, Brisbane, 2006

Journal ref: in R. Sang and J. Dobson (eds), Australian Institute of Physics (AIP) 17th National Congress 2006: Refereed Papers, (Australian Institute of Physics, 2006) [CD-ROM, unpaginated]

Optical trapping of a cube

Authors: A. M. Branczyk, T. A. Nieminen, N. R. Heckenberg, H. Rubinsztein-Dunlop

Abstract: The successful development and optimisation of optically-driven micromachines will be greatly enhanced by the ability to computationally model the optical forces and torques applied to such devices. In principle, this can be done by calculating the light-scattering properties of such devices. However, while fast methods exist for scattering calculations for spheres and axisymmetric particles, op… ▽ More The successful development and optimisation of optically-driven micromachines will be greatly enhanced by the ability to computationally model the optical forces and torques applied to such devices. In principle, this can be done by calculating the light-scattering properties of such devices. However, while fast methods exist for scattering calculations for spheres and axisymmetric particles, optically-driven micromachines will almost always be more geometrically complex. Fortunately, such micromachines will typically possess a high degree of symmetry, typically discrete rotational symmetry. Many current designs for optically-driven micromachines are also mirror-symmetric about a plane. We show how such symmetries can be used to reduce the computational time required by orders of magnitude. Similar improvements are also possible for other highly-symmetric objects such as crystals. We demonstrate the efficacy of such methods by modelling the optical trapping of a cube, and show that even simple shapes can function as optically-driven micromachines. △ Less

Submitted 5 February, 2007; originally announced February 2007.

Comments: 5 pages, 2 figures, presented at 17th AIP Congress, Brisbane, 2006

Journal ref: in R. Sang and J. Dobson (eds), Australian Institute of Physics (AIP) 17th National Congress 2006: Refereed Papers (Australian Institute of Physics, 2006) [CD-ROM, unpaginated]

Collecting single molecules with conventional optical tweezers

Authors: Wolfgang Singer, Timo A. Nieminen, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: The size of particles which can be trapped in optical tweezers ranges from tens of nanometres to tens of micrometres. This size regime also includes large single molecules. Here we present experiments demonstrating that optical tweezers can be used to collect polyethylene oxide (PEO) molecules suspended in water. The molecules that accumulate in the focal volume do not aggregate and therefore re… ▽ More The size of particles which can be trapped in optical tweezers ranges from tens of nanometres to tens of micrometres. This size regime also includes large single molecules. Here we present experiments demonstrating that optical tweezers can be used to collect polyethylene oxide (PEO) molecules suspended in water. The molecules that accumulate in the focal volume do not aggregate and therefore represent a region of increased molecule concentration, which can be controlled by the trapping potential. We also present a model which relates the change in concentration to the trapping potential. Since many protein molecules have molecular weights for which this method is applicable the effect may be useful in assisting nucleation of protein crystals. △ Less

Submitted 5 February, 2007; originally announced February 2007.

Comments: 5 pages, 4 figures

Journal ref: Physical Review E 75(1), 011916 (2007)

Measurement of refractive index of single microparticles

Authors: Gregor Knoener, Simon Parkin, Timo A. Nieminen, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: The refractive index of single microparticles is derived from precise measurement and rigorous modeling of the stiffness of a laser trap. We demonstrate the method for particles of four different materials with diameters from 1.6 to 5.2 microns and achieve an accuracy of better than 1%. The method greatly contributes as a new characterization technique because it works best under conditions (sma… ▽ More The refractive index of single microparticles is derived from precise measurement and rigorous modeling of the stiffness of a laser trap. We demonstrate the method for particles of four different materials with diameters from 1.6 to 5.2 microns and achieve an accuracy of better than 1%. The method greatly contributes as a new characterization technique because it works best under conditions (small particle size, polydispersion) where other methods, such as absorption spectroscopy, start to fail. Particles need not be transferred to a particular fluid, which prevents particle degradation or alteration common in index matching techniques. Our results also show that advanced modeling of laser traps accurately reproduces experimental reality. △ Less

Submitted 11 October, 2006; originally announced October 2006.

Comments: 5 pages, 4 figures

Journal ref: Physical Review Letters 97(15), 157402 (2006)

Modelling optical micro-machines

Authors: Vincent L. Y. Loke, Timo A. Nieminen, Agata M. Branczyk, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: A strongly focused laser beam can be used to trap, manipulate and exert torque on a microparticle. The torque is the result of transfer of angular momentum by scattering of the laser beam. The laser could be used to drive a rotor, impeller, cog wheel or some other microdevice of a few microns in size, perhaps fabricated from a birefringent material. We review our methods of computationally simul… ▽ More A strongly focused laser beam can be used to trap, manipulate and exert torque on a microparticle. The torque is the result of transfer of angular momentum by scattering of the laser beam. The laser could be used to drive a rotor, impeller, cog wheel or some other microdevice of a few microns in size, perhaps fabricated from a birefringent material. We review our methods of computationally simulating the torque and force imparted by a laser beam. We introduce a method of hybridizing the T-matrix with the Finite Difference Frequency Domain (FDFD) method to allow the modelling of materials that are anisotropic and inhomogeneous, and structures that have complex shapes. The high degree of symmetry of a microrotor, such as discrete or continuous rotational symmetry, can be exploited to reduce computational time and memory requirements by orders of magnitude. This is achieved by performing calculations for only a given segment or plane that is repeated across the whole structure. This can be demonstrated by modelling the optical trapping and rotation of a cube. △ Less

Submitted 30 July, 2006; originally announced July 2006.

Comments: 4 pages, 3 figures

Journal ref: pp. 163-166 in Nikolai Voshchinnikov (ed.), 9th International Conference on Electromagnetic and Light Scattering by Non-Spherical Particles: Theory, Measurements, and Applications (St. Petersburg State University, St. Petersburg, 2006)

Towards efficient modelling of optical micromanipulation of complex structures

Authors: T. A. Nieminen, V. L. Y. Loke, A. M. Branczyk, N. R. Heckenberg, H. Rubinsztein-Dunlop

Abstract: Computational methods for electromagnetic and light scattering can be used for the calculation of optical forces and torques. Since typical particles that are optically trapped or manipulated are on the order of the wavelength in size, approximate methods such as geometric optics or Rayleigh scattering are inapplicable, and solution or either the Maxwell equations or the vector Helmholtz equatio… ▽ More Computational methods for electromagnetic and light scattering can be used for the calculation of optical forces and torques. Since typical particles that are optically trapped or manipulated are on the order of the wavelength in size, approximate methods such as geometric optics or Rayleigh scattering are inapplicable, and solution or either the Maxwell equations or the vector Helmholtz equation must be resorted to. Traditionally, such solutions were only feasible for the simplest geometries; modern computational power enable the rapid solution of more general--but still simple--geometries such as axisymmetric, homogeneous, and isotropic scatterers. However, optically-driven micromachines necessarily require more complex geometries, and their computational modelling thus remains in the realm of challenging computational problems. We review our progress towards efficient computational modelling of optical tweezers and micromanipulation, including the trapping and manipulation of complex structures such as optical micromachines. In particular, we consider the exploitation of symmetry in the modelling of such devices. △ Less

Submitted 25 July, 2006; originally announced July 2006.

Comments: 5 pages, 4 figures

Journal ref: pp. 442-446 in PIERS 2006 Cambridge Proceedings, The Electromagnetics Academy, Cambridge, MA (2006)

Measurement of the total optical angular momentum transfer in optical tweezers

Authors: Simon Parkin, Gregor Knoener, Timo A. Nieminen, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: We describe a way to determine the total angular momentum, both spin and orbital, transferred to a particle trapped in optical tweezers. As an example an LG02 mode of a laser beam with varying degrees of circular polarisation is used to trap and rotate an elongated particle with a well defined geometry. The method successfully estimates the total optical torque applied to the particle. For this… ▽ More We describe a way to determine the total angular momentum, both spin and orbital, transferred to a particle trapped in optical tweezers. As an example an LG02 mode of a laser beam with varying degrees of circular polarisation is used to trap and rotate an elongated particle with a well defined geometry. The method successfully estimates the total optical torque applied to the particle. For this technique, there is no need to measure the viscous drag on the particle, as it is an optical measurement. Therefore, knowledge of the particle's size and shape, as well as the fluid's viscosity, is not required. △ Less

Submitted 24 July, 2006; originally announced July 2006.

Comments: 7 pages, 3 figures

Journal ref: Optics Express, 14(15), 6963-6970 (2006)

Orientation of optically trapped nonspherical birefringent particles

Authors: Wolfgang Singer, Timo A. Nieminen, Ursula J. Gibson, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: While the alignment and rotation of microparticles in optical traps have received increased attention recently, one of the earliest examples has been almost totally neglected the alignment of particles relative to the beam axis, as opposed to about the beam axis. However, since the alignment torques determine how particles align in a trap, they are directly relevant to practical applications. Ly… ▽ More While the alignment and rotation of microparticles in optical traps have received increased attention recently, one of the earliest examples has been almost totally neglected the alignment of particles relative to the beam axis, as opposed to about the beam axis. However, since the alignment torques determine how particles align in a trap, they are directly relevant to practical applications. Lysozyme crystals are an ideal model system to study factors determining the orientation of nonspherical birefringent particles in a trap. Both their size and their aspect ratio can be controlled by the growth parameters, and their regular shape makes computational modeling feasible. We show that both external shape and internal birefringence anisotropy contribute to the alignment torque. Three-dimensionally trapped elongated objects either align with their long axis parallel or perpendicular to the beam axis depending on their size. The shape-dependent torque can exceed the torque due to birefringence, and can align negative uniaxial particles with their optic axis parallel to the electric field, allowing an application of optical torque about the beam axis. △ Less

Submitted 22 February, 2006; originally announced February 2006.

Comments: 5 pages, 5 figures

Journal ref: Physical Review E 73(2), 021911 (2006)

Angular momentum of a strongly focussed Gaussian beam

Authors: Timo A. Nieminen, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: A circularly polarized rotationally symmetric paraxial laser beams carries hbar angular momentum per photon as spin. Focussing the beam with a rotationally symmetric lens cannot change this angular momentum flux, yet the focussed beam must have spin less than hbar per photon. The remainder of the original spin is converted to orbital angular momentum, manifesting itself as a longitudinal optical… ▽ More A circularly polarized rotationally symmetric paraxial laser beams carries hbar angular momentum per photon as spin. Focussing the beam with a rotationally symmetric lens cannot change this angular momentum flux, yet the focussed beam must have spin less than hbar per photon. The remainder of the original spin is converted to orbital angular momentum, manifesting itself as a longitudinal optical vortex at the focus. This demonstrates that optical orbital angular momentum can be generated by a rotationally symmetric optical system which preserves the total angular momentum of the beam. △ Less

Submitted 17 August, 2004; originally announced August 2004.

Comments: 4 pages, 3 figures

Laser frequency locking by direct measurement of detuning

Authors: A. Ratnapala, C. J. Vale, A. G. White, M. D. Harvey, N. Heckenberg, H. Rubinsztein-Dunlop

Abstract: We present a new method of laser frequency locking in which the feedback signal is directly proportional to the detuning from an atomic transition, even at detunings many times the natural linewidth of the transition. Our method is a form of sub-Doppler polarization spectroscopy, based on measuring two Stokes parameters ($I_2$ and $I_3$) of light transmitted through a vapor cell. This extends th… ▽ More We present a new method of laser frequency locking in which the feedback signal is directly proportional to the detuning from an atomic transition, even at detunings many times the natural linewidth of the transition. Our method is a form of sub-Doppler polarization spectroscopy, based on measuring two Stokes parameters ($I_2$ and $I_3$) of light transmitted through a vapor cell. This extends the linear capture range of the lock loop by up to an order of magnitude and provides equivalent or improved frequency discrimination as other commonly used locking techniques. △ Less

Submitted 20 May, 2004; originally announced May 2004.

Comments: 4 pages, 4 figures Revtex

Optical measurement of torque exerted on an elongated object by a non-circular laser beam

Authors: Simon J. Parkin, Timo A. Nieminen, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: We have developed a scheme to measure the optical torque, exerted by a laser beam on a phase object, by measuring the orbital angular momentum of the transmitted beam. The experiment is a macroscopic simulation of a situation in optical tweezers, as orbital angular momentum has been widely used to apply torque to microscopic objects. A hologram designed to generate LG02 modes and a CCD camera ar… ▽ More We have developed a scheme to measure the optical torque, exerted by a laser beam on a phase object, by measuring the orbital angular momentum of the transmitted beam. The experiment is a macroscopic simulation of a situation in optical tweezers, as orbital angular momentum has been widely used to apply torque to microscopic objects. A hologram designed to generate LG02 modes and a CCD camera are used to detect the orbital component of the beam. Experimental results agree with theoretical numerical calculations, and the strength of the orbital component suggest its usefulness in optical tweezers for micromanipulation. △ Less

Submitted 26 August, 2004; v1 submitted 29 February, 2004; originally announced March 2004.

Comments: 6 pages, 7 figures, v2: minor typographical corrections

Journal ref: Physical Review A, 70(2), 023816 (2004)

Optical microrheology using rotating laser-trapped particles

Authors: Alexis I. Bishop, Timo A. Nieminen, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: We demonstrate an optical system that can apply and accurately measure the torque exerted by the trapping beam on a rotating birefringent probe particle. This allows the viscosity and surface effects within liquid media to be measured quantitatively on a micron-size scale using a trapped rotating spherical probe particle. We use the system to measure the viscosity inside a prototype cellular str… ▽ More We demonstrate an optical system that can apply and accurately measure the torque exerted by the trapping beam on a rotating birefringent probe particle. This allows the viscosity and surface effects within liquid media to be measured quantitatively on a micron-size scale using a trapped rotating spherical probe particle. We use the system to measure the viscosity inside a prototype cellular structure. △ Less

Submitted 16 May, 2004; v1 submitted 4 February, 2004; originally announced February 2004.

Comments: 5 pages, 4 figures. v2: bibliographic details, minor text corrections

Journal ref: Physical Review Letters 92(19), 198104 (2004)

Mechanical effects of optical vortices

Authors: N. R. Heckenberg, M. E. J. Friese, T. A. Nieminen, H. Rubinsztein-Dunlop

Abstract: We concentrate on the forces and torques exerted on transparent and absorbing particles trapped in laser beams containing optical vortices. We review previous theoretical and experimental work and then present new calculations of the effect of vortex beams on absorbing particles. We concentrate on the forces and torques exerted on transparent and absorbing particles trapped in laser beams containing optical vortices. We review previous theoretical and experimental work and then present new calculations of the effect of vortex beams on absorbing particles. △ Less

Submitted 1 December, 2003; originally announced December 2003.

Comments: 32 pages, 9 figures

Journal ref: pp 75-105 in M. Vasnetsov and K. Staliunas (eds), Optical Vortices (Horizons in World Physics 228), Nova Science Publishers, Commack, New York (1999)

Optical trapping of absorbing particles

Authors: H. Rubinsztein-Dunlop, T. A. Nieminen, M. E. J. Friese, N. R. Heckenberg

Abstract: Radiation pressure forces in a focussed laser beam can be used to trap microscopic absorbing particles against a substrate. Calculations based on momentum transfer considerations show that stable trapping occurs before the beam waist, and that trapping is more effective with doughnut beams. Such doughnut beams can transfer angular momentum leading to rotation of the trapped particles. Energy is… ▽ More Radiation pressure forces in a focussed laser beam can be used to trap microscopic absorbing particles against a substrate. Calculations based on momentum transfer considerations show that stable trapping occurs before the beam waist, and that trapping is more effective with doughnut beams. Such doughnut beams can transfer angular momentum leading to rotation of the trapped particles. Energy is also transferred, which can result in heating of the particles to temperatures above the boiling point of the surrounding medium. △ Less

Submitted 5 October, 2003; originally announced October 2003.

Comments: 13 pages, 11 figures

Journal ref: Advances in Quantum Chemistry 30, 469-492 (1998)

Optical torque controlled by elliptical polarization

Authors: M. E. J. Friese, T. A. Nieminen, N. R. Heckenberg, H. Rubinsztein-Dunlop

Abstract: We show theoretically and demonstrate experimentally that highly absorbing particles can be trapped and manipulated in a single highly focused Gaussian beam. Our studies of the effects of polarized light on such particles show that they can be set into rotation by elliptically polarized light and that both the sense and the speed of their rotation can be smoothly controlled. We show theoretically and demonstrate experimentally that highly absorbing particles can be trapped and manipulated in a single highly focused Gaussian beam. Our studies of the effects of polarized light on such particles show that they can be set into rotation by elliptically polarized light and that both the sense and the speed of their rotation can be smoothly controlled. △ Less

Submitted 30 September, 2003; originally announced October 2003.

Comments: 3 pages, 3 figures

Journal ref: Optics Letters 23, 1-3 (1998)

Optical application and measurement of torque on microparticles of isotropic nonabsorbing material

Authors: Alexis I. Bishop, Timo A. Nieminen, Norman R. Heckenberg, Halina Rubinsztein-Dunlop

Abstract: We show how it is possible to controllably rotate or align microscopic particles of isotropic nonabsorbing material in a TEM00 Gaussian beam trap, with simultaneous measurement of the applied torque using purely optical means. This is a simple and general method of rotation, requiring only that the particle is elongated along one direction. Thus, this method can be used to rotate or align a wide… ▽ More We show how it is possible to controllably rotate or align microscopic particles of isotropic nonabsorbing material in a TEM00 Gaussian beam trap, with simultaneous measurement of the applied torque using purely optical means. This is a simple and general method of rotation, requiring only that the particle is elongated along one direction. Thus, this method can be used to rotate or align a wide range of naturally occurring particles. The ability to measure the applied torque enables the use of this method as a quantitative tool--the rotational equivalent of optical tweezers based force measurement. As well as being of particular value for the rotation of biological specimens, this method is also suitable for the development of optically-driven micromachines. △ Less

Submitted 30 September, 2003; originally announced September 2003.

Comments: 8 pages, 6 figures

Journal ref: Physical Review A 68, 033802 (2003)