Showing 1–50 of 255 results for author: Martínez, A

Operational Experience of the NML Cryogenic Plant at the FAST Test Facility

Authors: Timothy Wallace, Joaquim Creus-Prats, Joseph Hurd, Michael J White, Jerry Makara, Liujin Pei, Benjamin Hansen, Jay Theilacker, Rick Bossert, Alexander Martinez, James K Santucci, Sasha Romanov

Abstract: The NML cryogenic plant cools two individually cryostated superconducting radio frequency (SRF) capture cavities and one prototype ILC cryomodule with eight SRF cavities. This complex accelerates electrons at 150 MeV for the Integrable Optics Test Accelerator (IOTA) ring, located at the Fermilab Accelerator Science and Technology (FAST) facility. The cryogenic plant is composed of two nitrogen pre… ▽ More The NML cryogenic plant cools two individually cryostated superconducting radio frequency (SRF) capture cavities and one prototype ILC cryomodule with eight SRF cavities. This complex accelerates electrons at 150 MeV for the Integrable Optics Test Accelerator (IOTA) ring, located at the Fermilab Accelerator Science and Technology (FAST) facility. The cryogenic plant is composed of two nitrogen precooled Tevatron satellite refrigerators, two Mycom 2016C compressors, a cryogenic distribution system, a Frick purifier compressor, two charcoal bed adsorber purifiers, and a liquid ring vacuum pump with a roots booster. The SRF cavities are immersed in a 2.0 K liquid helium bath, shielded with a 5 K gaseous helium shield and a liquid nitrogen cooled thermal shield. Since 2019, this R&D accelerator complex has gone through four science runs with an average duration of 12 months. Operational experience for each run, availability metrics, performance data and common outages are presented in this paper. △ Less

Submitted 25 June, 2025; originally announced June 2025.

Comments: 26th joint CEC/ICMC Conference

Report number: FERMILAB-PUB-25-0385-AD-TD

Inherited or produced? Inferring protein production kinetics when protein counts are shaped by a cell's division history

Authors: Pedro Pessoa, Juan Andres Martinez, Vincent Vandenbroucke, Frank Delvigne, Steve Pressé

Abstract: Inferring protein production kinetics for dividing cells is complicated due to protein inheritance from the mother cell. For instance, fluorescence measurements -- commonly used to assess gene activation -- may reflect not only newly produced proteins but also those inherited through successive cell divisions. In such cases, observed protein levels in any given cell are shaped by its division hist… ▽ More Inferring protein production kinetics for dividing cells is complicated due to protein inheritance from the mother cell. For instance, fluorescence measurements -- commonly used to assess gene activation -- may reflect not only newly produced proteins but also those inherited through successive cell divisions. In such cases, observed protein levels in any given cell are shaped by its division history. As a case study, we examine activation of the glc3 gene in yeast involved in glycogen synthesis and expressed under nutrient-limiting conditions. We monitor this activity using snapshot fluorescence measurements via flow cytometry, where GFP expression reflects glc3 promoter activity. A naïve analysis of flow cytometry data ignoring cell division suggests many cells are active with low expression. Explicitly accounting for the (non-Markovian) effects of cell division and protein inheritance makes it impossible to write down a tractable likelihood -- a key ingredient in physics-inspired inference, defining the probability of observing data given a model. The dependence on a cell's division history breaks the assumptions of standard (Markovian) master equations, rendering traditional likelihood-based approaches inapplicable. Instead, we adapt conditional normalizing flows (a class of neural network models designed to learn probability distributions) to approximate otherwise intractable likelihoods from simulated data. In doing so, we find that glc3 is mostly inactive under stress, showing that while cells occasionally activate the gene, expression is brief and transient. △ Less

Submitted 1 July, 2025; v1 submitted 10 June, 2025; originally announced June 2025.

The NEXT-100 Detector

Authors: NEXT Collaboration, C. Adams, H. Almazán, V. Álvarez, A. I. Aranburu, L. Arazi, I. J. Arnquist, F. Auria-Luna, S. Ayet, C. D. R. Azevedo, K. Bailey, F. Ballester, J. E. Barcelon, M. del Barrio-Torregrosa, A. Bayo, J. M. Benlloch-Rodríguez, A. Bitadze, F. I. G. M. Borges, A. Brodolin, N. Byrnes, S. Carcel, A. Castillo, S. Cebrián, E. Church, L. Cid , et al. (98 additional authors not shown)

Abstract: The NEXT collaboration is dedicated to the study of double beta decays of $^{136}$Xe using a high-pressure gas electroluminescent time projection chamber. This advanced technology combines exceptional energy resolution ($\leq 1\%$ FWHM at the $Q_{ββ}$ value of the neutrinoless double beta decay) and powerful topological event discrimination. Building on the achievements of the NEXT-White detector,… ▽ More The NEXT collaboration is dedicated to the study of double beta decays of $^{136}$Xe using a high-pressure gas electroluminescent time projection chamber. This advanced technology combines exceptional energy resolution ($\leq 1\%$ FWHM at the $Q_{ββ}$ value of the neutrinoless double beta decay) and powerful topological event discrimination. Building on the achievements of the NEXT-White detector, the NEXT-100 detector started taking data at the Laboratorio Subterráneo de Canfranc (LSC) in May of 2024. Designed to operate with xenon gas at 13.5 bar, NEXT-100 consists of a time projection chamber where the energy and the spatial pattern of the ionising particles in the detector are precisely retrieved using two sensor planes (one with photo-multiplier tubes and the other with silicon photo-multipliers). In this paper, we provide a detailed description of the NEXT-100 detector, describe its assembly, present the current estimation of the radiopurity budget, and report the results of the commissioning run, including an assessment of the detector stability. △ Less

Submitted 23 May, 2025; originally announced May 2025.

Laser, Vacuum, and Gas Reaction Chamber for Operando Measurements at NSLS-II's 28-ID-2

Authors: Lauren Y. Moghimi, Patrik Johansson, Subhechchha Paul, Yifan Wang, Sara Irvine, Remington Graham, Zane Taylor, Angel A. Martinez, John T. Markert, John Trunk, Hui Zhong, Jianming Bai, Sanjit Ghose, Leora Dresselhaus-Marais

Abstract: We present a laser reaction chamber that we developed for in-situ/operando X-ray diffraction measurements at the NSLS-II 28-ID-2 XPD (X-Ray Powder Diffraction) beamline. This chamber allows for rapid and dynamic sample heating under specialized gas environments, spanning ambient conditions down to vacuum pressures. We demonstrate the capabilities of this setup through two applications: laser-drive… ▽ More We present a laser reaction chamber that we developed for in-situ/operando X-ray diffraction measurements at the NSLS-II 28-ID-2 XPD (X-Ray Powder Diffraction) beamline. This chamber allows for rapid and dynamic sample heating under specialized gas environments, spanning ambient conditions down to vacuum pressures. We demonstrate the capabilities of this setup through two applications: laser-driven heating in polycrystalline iron oxide and in single crystal WTe2. Our measurements reveal the ability to resolve chemical reaction kinetics over minutes with 1-s time resolution. This setup advances opportunities for in-situ/operando XRD studies in both bulk and single crystal materials. △ Less

Submitted 15 May, 2025; originally announced May 2025.

Space-Time Elastic Metamaterials for Zero-Frequency and Zero-Wavenumber Bandgaps

Authors: Brahim Lemkalli, Alaa Ali, Qingxiang Ji, Julio Andrés Iglesias Martínez, Younes Achaoui, Sebastien Guenneau, Richard Craster, Muamer Kadic

Abstract: We create wave-matter space-time metamaterials using optical trapping forces to manipulate mass-spring chains and create zero-frequency and zero-wavenumber band gaps: the bosonic nature of phonons, and hence this elastodynamic setting, traditionally prohibits either zero-frequency or zero-wavenumber band gaps. Here, we generate zero-frequency gaps using optomechanical interactions within a 3D mass… ▽ More We create wave-matter space-time metamaterials using optical trapping forces to manipulate mass-spring chains and create zero-frequency and zero-wavenumber band gaps: the bosonic nature of phonons, and hence this elastodynamic setting, traditionally prohibits either zero-frequency or zero-wavenumber band gaps. Here, we generate zero-frequency gaps using optomechanical interactions within a 3D mass-spring chain by applying an optical trapping force to hold or manipulate a mass in a contactless manner independent of its elastodynamic excitations. Through careful modification of the geometrical parameters in the trapped monoatomic mass-spring chain, we demonstrate the existence of a zero-frequency gap generated by the optical forces on the masses. The precise control we have over the system allows us to drive another set of masses and springs out of phase with its traveling wave thereby creating a zero-wavenumber band gap. △ Less

Submitted 6 May, 2025; originally announced May 2025.

Comments: 6 figures

Dual-mode phonon dynamics and lasing in optomechanical cavities

Authors: Raúl Ortiz, Carlos Mas Arabí, Carles Milián, Alejandro Martínez

Abstract: We use the full nonlinear bifurcation theory as a powerful methodology to thoroughly classify and predict the phonon lasing dynamics in optomechanical cavities. We exemplify its scope in the very relevant and so far vaguely explored dynamics of dual-mode phonon lasing when two independent mechanical modes are directly coupled to one optical field. We uncover a plethora of different lasing regimes… ▽ More We use the full nonlinear bifurcation theory as a powerful methodology to thoroughly classify and predict the phonon lasing dynamics in optomechanical cavities. We exemplify its scope in the very relevant and so far vaguely explored dynamics of dual-mode phonon lasing when two independent mechanical modes are directly coupled to one optical field. We uncover a plethora of different lasing regimes in a fixed and realistic cavity geometry, including single- and dual-mode lasing, perfect synchronization of different mechanical modes, and quasiperiodic time crystals. All dynamical regimes are unambiguously associated with bifurcations of different natures, which may exhibit both super and sub-critical natures characterizing the often hysteretic behavior of the systems when they are externally driven by a time-varying laser source. Our results, generalizable to any other optomechanical system, open unprecedented pathways to understand and control the formation and dynamics of optomechanical frequency combs. △ Less

Submitted 6 May, 2025; originally announced May 2025.

Chiral optical forces in a slot waveguide for separation of molecules in gas

Authors: Josep Martínez-Romeu, Daniel Arenas-Ortega, Iago Diez, Alejandro Martínez

Abstract: Chiral optical forces present an exciting avenue into the separation of enantiomers in an all-optical fashion. In this work, we explore via numerical simulations and analytical calculations the feasibility of the separation of chiral molecules by using guided light in a dielectric slot waveguide. Our results suggest that it is possible to separate [6]helicene enantiomers suspended in gas within se… ▽ More Chiral optical forces present an exciting avenue into the separation of enantiomers in an all-optical fashion. In this work, we explore via numerical simulations and analytical calculations the feasibility of the separation of chiral molecules by using guided light in a dielectric slot waveguide. Our results suggest that it is possible to separate [6]helicene enantiomers suspended in gas within several hours when applying optical powers of 100 mW. △ Less

Submitted 7 April, 2025; originally announced April 2025.

Comments: 14 pages, 7 figures

Error correction of a logical qubit encoded in a single atomic ion

Authors: Kyle DeBry, Nadine Meister, Agustin Valdes Martinez, Colin D. Bruzewicz, Xiaoyang Shi, David Reens, Robert McConnell, Isaac L. Chuang, John Chiaverini

Abstract: Quantum error correction (QEC) is essential for quantum computers to perform useful algorithms, but large-scale fault-tolerant computation remains out of reach due to demanding requirements on operation fidelity and the number of controllable quantum bits (qubits). Traditional QEC schemes involve encoding each logical qubit into multiple physical qubits, requiring a significant overhead in resourc… ▽ More Quantum error correction (QEC) is essential for quantum computers to perform useful algorithms, but large-scale fault-tolerant computation remains out of reach due to demanding requirements on operation fidelity and the number of controllable quantum bits (qubits). Traditional QEC schemes involve encoding each logical qubit into multiple physical qubits, requiring a significant overhead in resources and complexity. Recent theoretical work has proposed a complementary approach of performing error correction at the single-particle level by taking advantage of additional available quantum states, potentially reducing QEC overhead. However, this approach has not been demonstrated experimentally, due in part to the difficulty of performing error measurements and subsequent error correction with high fidelity. Here we demonstrate QEC in a single atomic ion that decreases errors by a factor of up to 2.2 and extends the qubit's useful lifetime by a factor of up to 1.5 compared to an unencoded qubit. The qubit is encoded in spin-cat logical states, and we develop a scheme for autonomous error correction that does not require mid-circuit measurements of an ancilla. Our work is applicable to a wide variety of finite-dimensional quantum systems, and such encodings may prove useful either as components of larger QEC codes, or when used alone in few-qubit devices, such as quantum network nodes. △ Less

Submitted 18 March, 2025; originally announced March 2025.

Comments: 15 pages, 10 figures

Active magneto-mechanical metamaterial with the wave transmission and Poisson's ratio controlled via the magnetic field

Authors: K. K. Dudek, J. A. Iglesias Martínez, L. Hirsinger, M. Kadic, M. Devel

Abstract: In recent years, there has been a notable increase in the significance of active mechanical metamaterials capable of being remotely manipulated through changes in external stimuli. While research in this area has achieved considerable success in controlling reconfiguration to induce shape morphing or alter static mechanical properties, the active control of wave propagation within these systems re… ▽ More In recent years, there has been a notable increase in the significance of active mechanical metamaterials capable of being remotely manipulated through changes in external stimuli. While research in this area has achieved considerable success in controlling reconfiguration to induce shape morphing or alter static mechanical properties, the active control of wave propagation within these systems remains largely unexplored. In this study, we propose a magneto-mechanical metamaterial that can be entirely governed by adjusting the magnitude and direction of an external magnetic field. We demonstrate that such a system offers remote control over its Poisson's ratio, allowing for transitions from strongly auxetic to positive Poisson's ratio configurations. Additionally, our system enables manipulation of the phononic band structure, facilitating the formation of complete band gaps across different frequency ranges depending on the stage of the magnetically guided reconfiguration process. The potential for achieving such active control over the properties and behavior of these materials holds great promise for various applications, including robotics and smart vibration dampers that can be remotely controlled. △ Less

Submitted 10 March, 2025; originally announced March 2025.

Comments: This article was published in the Journal of Sound and Vibration

Journal ref: J. Sound Vib. 595, 118784 (2025)

Computer-aided shape features extraction and regression models for predicting the ascending aortic aneurysm growth rate

Authors: Leonardo Geronzi, Antonio Martinez, Michel Rochette, Kexin Yan, Aline Bel-Brunon, Pascal Haigron, Pierre Escrig, Jacques Tomasi, Morgan Daniel, Alain Lalande, Siyu Lin, Diana Marcela Marin-Castrillon, Olivier Bouchot, Jean Porterie, Pier Paolo Valentini, Marco Evangelos Biancolini

Abstract: Objective: ascending aortic aneurysm growth prediction is still challenging in clinics. In this study, we evaluate and compare the ability of local and global shape features to predict ascending aortic aneurysm growth. Material and methods: 70 patients with aneurysm, for which two 3D acquisitions were available, are included. Following segmentation, three local shape features are computed: (1) t… ▽ More Objective: ascending aortic aneurysm growth prediction is still challenging in clinics. In this study, we evaluate and compare the ability of local and global shape features to predict ascending aortic aneurysm growth. Material and methods: 70 patients with aneurysm, for which two 3D acquisitions were available, are included. Following segmentation, three local shape features are computed: (1) the ratio between maximum diameter and length of the ascending aorta centerline, (2) the ratio between the length of external and internal lines on the ascending aorta and (3) the tortuosity of the ascending tract. By exploiting longitudinal data, the aneurysm growth rate is derived. Using radial basis function mesh morphing, iso-topological surface meshes are created. Statistical shape analysis is performed through unsupervised principal component analysis (PCA) and supervised partial least squares (PLS). Two types of global shape features are identified: three PCA-derived and three PLS-based shape modes. Three regression models are set for growth prediction: two based on gaussian support vector machine using local and PCA-derived global shape features; the third is a PLS linear regression model based on the related global shape features. The prediction results are assessed and the aortic shapes most prone to growth are identified. Results: the prediction root mean square error from leave-one-out cross-validation is: 0.112 mm/month, 0.083 mm/month and 0.066 mm/month for local, PCA-based and PLS-derived shape features, respectively. Aneurysms close to the root with a large initial diameter report faster growth. Conclusion: global shape features might provide an important contribution for predicting the aneurysm growth. △ Less

Submitted 4 March, 2025; originally announced March 2025.

Journal ref: Volume 162, August 2023, 107052, Computers in Biology and Medicine

Calibration of the mechanical boundary conditions for a patient-specific thoracic aorta model including the heart motion effect

Authors: Leonardo Geronzi, Aline Bel-Brunon, Antonio Martinez, Michel Rochette, Marco Sensale, Olivier Bouchot, Alain Lalande, Siyu Lin, Pier Paolo Valentini, Marco Evangelos Biancolini

Abstract: Objective: we propose a procedure for calibrating 4 parameters governing the mechanical boundary conditions (BCs) of a thoracic aorta (TA) model derived from one patient with ascending aortic aneurysm. The BCs reproduce the visco-elastic structural support provided by the soft tissue and the spine and allow for the inclusion of the heart motion effect. Methods: we first segment the TA from magne… ▽ More Objective: we propose a procedure for calibrating 4 parameters governing the mechanical boundary conditions (BCs) of a thoracic aorta (TA) model derived from one patient with ascending aortic aneurysm. The BCs reproduce the visco-elastic structural support provided by the soft tissue and the spine and allow for the inclusion of the heart motion effect. Methods: we first segment the TA from magnetic resonance imaging (MRI) angiography and derive the heart motion by tracking the aortic annulus from cine-MRI. A rigid-wall fluid-dynamic simulation is performed to derive the time-varying wall pressure field. We build the finite element model considering patient-specific material properties and imposing the derived pressure field and the motion at the annulus boundary. The calibration, which involves the zero-pressure state computation, is based on purely structural simulations. After obtaining the vessel boundaries from the cine-MRI sequences, an iterative procedure is performed to minimize the distance between them and the corresponding boundaries derived from the deformed structural model. A strongly-coupled fluid-structure interaction (FSI) analysis is finally performed with the tuned parameters and compared to the purely structural simulation. Results and Conclusion: the calibration with structural simulations allows to reduce maximum and mean distances between image-derived and simulation-derived boundaries from 8.64 mm to 6.37 mm and from 2.24 mm to 1.83 mm, respectively. The maximum root mean square error between the deformed structural and FSI surface meshes is 0.19 mm. This procedure may prove crucial for increasing the model fidelity in replicating the real aortic root kinematics. △ Less

Submitted 4 March, 2025; originally announced March 2025.

Journal ref: Volume: 70 Issue: 11, November 2023, IEEE Transaction on Biomedical Engineering

Virtual Critical Coupling in High-Power Resonant Systems

Authors: Aurora C. Araujo Martinez, Alex Krasnok, Sergey V. Kutsaev, Andrew Seltzman, Alexander Smirnov

Abstract: Exciting high-power resonators pose challenges such as managing power reflections, which can cause energy losses and damage system components. This is crucial for applications like Lower Hybrid Current Drive (LHCD) systems in tokamaks, where plasma stability and confinement depend on efficient energy transfer. In this work, we introduce the Virtual Critical Coupling mechanism to address reflection… ▽ More Exciting high-power resonators pose challenges such as managing power reflections, which can cause energy losses and damage system components. This is crucial for applications like Lower Hybrid Current Drive (LHCD) systems in tokamaks, where plasma stability and confinement depend on efficient energy transfer. In this work, we introduce the Virtual Critical Coupling mechanism to address reflection-related challenges in S-band resonators. We theoretically designed a complex frequency excitation signal tailored to the resonator's characteristics, facilitating efficient energy storage and minimizing reflections without mechanical modifications. Using a custom low-level RF system, we conducted experiments at 32 mW and 600 kW with a 5 MW S-band klystron, demonstrating a ninefold reduction in reflection coefficients compared to traditional monochromatic excitation in high-power tests. This approach enhances the efficiency and stability of high-power resonant systems, potentially advancing nuclear fusion energy production. △ Less

Submitted 10 February, 2025; originally announced February 2025.

Self-modulated multimode silicon cavity optomechanics

Authors: David Alonso-Tomás, Carlos Mas Arabí, Carles Milián, Néstor E. Capuj, Alejandro Martínez, Daniel Navarro-Urrios

Abstract: Multimode cavity optomechanics, where multiple mechanical degrees of freedom couple to optical cavity modes, provides a rich platform for exploring nonlinear dynamics and engineering complex interactions. In this work, we investigate the interplay between two mechanical modes with similar characteristics and a self-induced nonlinear modulation of intra-cavity power (self-pulsing) driven by free-ca… ▽ More Multimode cavity optomechanics, where multiple mechanical degrees of freedom couple to optical cavity modes, provides a rich platform for exploring nonlinear dynamics and engineering complex interactions. In this work, we investigate the interplay between two mechanical modes with similar characteristics and a self-induced nonlinear modulation of intra-cavity power (self-pulsing) driven by free-carrier dispersion and thermo-optic effects in silicon. Notably, the self-pulsing dynamics adapts to the optomechanically induced perturbations from both mechanical modes, enabling simultaneous synchronous pumping and driving them into a stable state characterized by high-amplitude, self-sustained, and coherent oscillations. This result effectively overcomes the strong mode competition typically observed in modes with similar spatial distributions and frequency scales. Remarkably, this regime is achieved even when the mechanical frequencies do not satisfy a harmonic relation, leading to quasi-periodic or chaotic intra-cavity power dynamics, while the mechanical modes maintain coherent, high-amplitude oscillations. These results, supported by a numerical model that accurately predicts the dynamics of the system, open new pathways for the generation and control of multi-phonon coherent sources in chip-integrated silicon platforms. △ Less

Submitted 28 January, 2025; originally announced January 2025.

Analysis of Eccentric Coaxial Waveguides Filled with Lossy Anisotropic Media via Finite Difference

Authors: Raul O. Ribeiro, Maria A. Martinez, Guilherme S. Rosa, Rafael A. Penchel

Abstract: This study presents a finite difference method (FDM) to model the electromagnetic field propagation in eccentric coaxial waveguides filled with lossy uniaxially anisotropic media. The formulation utilizes conformal transformation to map the eccentric circular waveguide into an equivalent concentric one. In the concentric problem, we introduce a novel normalized Helmholtz equation to decouple TM an… ▽ More This study presents a finite difference method (FDM) to model the electromagnetic field propagation in eccentric coaxial waveguides filled with lossy uniaxially anisotropic media. The formulation utilizes conformal transformation to map the eccentric circular waveguide into an equivalent concentric one. In the concentric problem, we introduce a novel normalized Helmholtz equation to decouple TM and TE modes, and we solve this non-homogeneous partial differential equation using the finite difference in cylindrical coordinates. The proposed approach was validated against perturbation-based, spectral element-based, and finite-integration-based numerical solutions. The preliminary results show that our solution is superior in computational time. Furthermore, our FDM formulation can be extended with minimal adaptations to model complex media problems, such as metamaterial devices, optical fibers, and geophysical exploration sensors. △ Less

Submitted 23 January, 2025; originally announced January 2025.

Comments: This work was presented at the SBMO 2024 - XXI Brazilian Symposium on Microwaves and Optoelectronics. For more information about the conference, please visit https://www.sbmo.org.br/sbmo/2024/home

Integrated electronic controller for dynamic self-configuration of photonic circuits

Authors: Emanuele Sacchi, Francesco Zanetto, Andrés Ivan Martinez, SeyedMohammad SeyedinNavadeh, Francesco Morichetti, Andrea Melloni, Marco Sampietro, Giorgio Ferrari

Abstract: Reconfigurable photonic integrated circuits (PICs) can implement arbitrary operations and signal processing functionalities directly in the optical domain. Run-time configuration of these circuits requires an electronic control layer to adjust the working point of their building elements and make them compensate for thermal drifts or degradations of the input signal. As the advancement of photonic… ▽ More Reconfigurable photonic integrated circuits (PICs) can implement arbitrary operations and signal processing functionalities directly in the optical domain. Run-time configuration of these circuits requires an electronic control layer to adjust the working point of their building elements and make them compensate for thermal drifts or degradations of the input signal. As the advancement of photonic foundries enables the fabrication of chips of increasing complexity, developing scalable electronic controllers becomes crucial for the operation of complex PICs. In this paper, we present an electronic application-specific integrated circuit (ASIC) designed for reconfiguration of PICs featuring numerous tuneable elements. Each channel of the ASIC controller independently addresses one optical component of the PIC, as multiple parallel local feedback loops are operated to achieve full control. The proposed design is validated through real-time reconfiguration of a 16-channel silicon photonics adaptive beam coupler. Results demonstrate automatic coupling of an arbitrary input beam to a single-mode waveguide, dynamic compensation of beam wavefront distortions and successful transmission of a 50 Gbit/s signal through an optical free-space link. The low power consumption and compactness of the electronic chip provide a scalable paradigm that can be seamlessly extended to larger photonic architectures. △ Less

Submitted 6 February, 2025; v1 submitted 16 January, 2025; originally announced January 2025.

Comments: Manuscript contains both main text and supplementary information

Bio-inspired site characterization -- towards soundings with lightweight equipment

Authors: Alejandro Martinez, Yuyan Chen, Riya Anilkumar

Abstract: Equipment used for site investigation activities like drill rigs are typically large and heavy to provide sufficient reaction mass to overcome the soil's penetration resistance. The need for large and heavy equipment creates challenges for performing site investigations at sites with limited accessibility, such as urban centres, vegetated areas, locations with height restrictions and surficial sof… ▽ More Equipment used for site investigation activities like drill rigs are typically large and heavy to provide sufficient reaction mass to overcome the soil's penetration resistance. The need for large and heavy equipment creates challenges for performing site investigations at sites with limited accessibility, such as urban centres, vegetated areas, locations with height restrictions and surficial soft soils, and steep slopes. Also, mobilization of large equipment to the project site is responsible for a significant portion of the carbon footprint of site investigations. Successful development of self burrowing technology can have enormous implications for geotechnical site investigation, ranging from performance of in situ tests to installation of instrumentation without the need of heavy equipment. During the last decade there has been an acceleration of research in the field of bioinspired geotechnics, whose premise is that certain animals and plants have developed efficient strategies to interact with geomaterials in ways that are analogous to those in geotechnical engineering. This paper provides a synthesis of advances in bioinspired site investigation related to the reduction of penetration resistance by means of modifying the tip shape, expanding a shaft section near the probe tip, applying motions to the tip like rotation and oscillation, and injecting fluids and generation of reaction forces with temporary anchors that enable self burrowing. Examples of prototypes that have been tested experimentally are highlighted. However, there are important research gaps associated with testing in a broader range of conditions, interpretation of results, and development of hardware that need to be addressed to develop field ready equipment that can provide useful data for geotechnical design. △ Less

Submitted 23 December, 2024; originally announced December 2024.

Comments: Proceedings of the 7th International Conference on Geotechnical and Geophysical Site Characterization

Polarization-Insensitive Integration of Nanoparticle-on-a-Slit Cavities with Dielectric Waveguides for On-chip Surface Enhanced Raman Spectroscopy

Authors: Javier Redolat, Daniel Arenas-Ortega, Ángela Barreda, Amadeu Griol, Elena Pinilla-Cienfuegos, Alejandro Martínez

Abstract: Amongst the available plasmonic nanostructures, nanoparticle-on-a-mirror (NPoM) cavities - consisting of metal nanoparticles separated from a metal mirror by a molecular-size monolayer - provide the ultimate light confinement in gaps even below 1 nm. A variation of the NPoM cavity is the nanoparticle-on-a-slit (NPoS) configuration, where the nanoparticle is placed on a functionalized narrow slit c… ▽ More Amongst the available plasmonic nanostructures, nanoparticle-on-a-mirror (NPoM) cavities - consisting of metal nanoparticles separated from a metal mirror by a molecular-size monolayer - provide the ultimate light confinement in gaps even below 1 nm. A variation of the NPoM cavity is the nanoparticle-on-a-slit (NPoS) configuration, where the nanoparticle is placed on a functionalized narrow slit created on a metal plate so that there are two nanometric-scale gaps for plasmonic localization. Interestingly, the NPoS cavity can also perform as a dual dipole antenna to localize both infrared and visible light, which is useful in molecular optomechanics. For many applications, it is desirable to integrate such cavities on a chip and provide access to (and collection from) the hot spots via photonic integrated waveguides. In this work, we propose, design, and experimentally demonstrate the efficient integration of NPoS plasmonic cavities with dielectric waveguides on a silicon-based chip. To this end, we use silicon-nitride slot waveguides and show that both the fundamental TE and TM modes can be used to drive the cavity, making our device polarization-independent. We demonstrate our concept by performing surface-enhanced Raman spectroscopy of BPT molecules on a chip fabricated by standard silicon fabrication tools mixed with the deterministic positioning of gold nanospheres on the gap of a plasmonic dipole antenna. △ Less

Submitted 21 October, 2024; originally announced October 2024.

Highly Transparent Lead-Free Piezoelectric Haptic Device

Authors: Longfei Song, Sebastjan Glinsek, Nagamalleswara Rao Alluri, Veronika Kovacova, Michele Melchiorr, Alfredo Blazquez Martinez, Barnik Mandal, Juliette Cardoletti, Emmanuel Defay

Abstract: Acoustic haptic technology adds touch sensations to human-machine interfaces by integrating piezoelectric actuators onto touchscreens. Traditional piezoelectric haptic technologies use opaque lead-containing ceramics that are both toxic and visible. We have developed a highly transparent lead-free piezoelectric haptic device using potassium sodium niobate (KNN) and transparent conductive oxide thi… ▽ More Acoustic haptic technology adds touch sensations to human-machine interfaces by integrating piezoelectric actuators onto touchscreens. Traditional piezoelectric haptic technologies use opaque lead-containing ceramics that are both toxic and visible. We have developed a highly transparent lead-free piezoelectric haptic device using potassium sodium niobate (KNN) and transparent conductive oxide thin films. The KNN film, grown on glass, exhibits a pure perovskite phase and a dense microstructure. This device achieves up to 80% transmittance, surpassing lead zirconate titanate (PZT) thin films. It generates an acoustic resonance at 16.5 kHz and produces a peak-to-peak displacement of 1.0 um at 28 V unipolar, making it suitable for surface rendering applications. This demonstrates the potential of transparent lead-free piezoelectric actuators as an effective alternative to conventional PZT haptic actuators. △ Less

Submitted 13 May, 2025; v1 submitted 21 October, 2024; originally announced October 2024.

Internal acoustic resonances: small scattering center compared with the wavelength

Authors: Naruna E. Rodrigues, José Renato Alcarás, Odemir M. Bruno, Gilberto Nakamura, Alexandre S. Martinez

Abstract: In fields such as acoustics, electromagnetism, and quantum physics, the scattering of waves by localized objects is a fundamental phenomenon. Building on this, the present study investigates the energy distribution within a spherical scattering center during its interaction with an incident acoustic wave. The analysis reveals unexpected resonance effects driven by impedance mismatches between the… ▽ More In fields such as acoustics, electromagnetism, and quantum physics, the scattering of waves by localized objects is a fundamental phenomenon. Building on this, the present study investigates the energy distribution within a spherical scattering center during its interaction with an incident acoustic wave. The analysis reveals unexpected resonance effects driven by impedance mismatches between the scattering center and the surrounding ideal fluid. These resonance phenomena occur even when the magnitude order of the incident wavelength is significantly larger compared to the size of the scattering center. Such resonance behavior, observed in the small-particle regime, has potential applications in ultrasound imaging, targeted drug delivery, and metamaterial design. △ Less

Submitted 1 October, 2024; originally announced October 2024.

PIP-II Linac Cryogenic Distribution System Design Challenges

Authors: T. Banaszkiewicz, M. Chorowski, P. Duda, M. Stanclik, R. Dhuley, A. Martinez, W. Soyars

Abstract: The PIP-II linac Cryogenic Distribution System (CDS) is characterized by extremely small heat inflows and robust mechanical design. It consists of a Distribution Valve Box (DVB), Intermediate Transfer Line, Tunnel Transfer Line, comprising 25 Bayonet Cans, and ends with a Turnaround Can. Multiple helium streams, each characterized by distinct helium parameters, flow through each of these elements.… ▽ More The PIP-II linac Cryogenic Distribution System (CDS) is characterized by extremely small heat inflows and robust mechanical design. It consists of a Distribution Valve Box (DVB), Intermediate Transfer Line, Tunnel Transfer Line, comprising 25 Bayonet Cans, and ends with a Turnaround Can. Multiple helium streams, each characterized by distinct helium parameters, flow through each of these elements. The CDS geometry allows maintaining an acceptable pressure drop for each helium stream, considering the planned flows and helium parameters in different operation modes. This is particularly crucial for the return line of helium vapors, which return from cryomodules to the cold compressors and thus have very restrictive pressure drop requirements. On both sides of the DVB there are fixed supports for process pipes. One of the DVB design challenges was to route the process pipes in such a way that their shape provided sufficient compensation for thermal shrinkage. This ensures th at the forces resulting from thermal shrinkage acting on the cryogenic valves remain at a level acceptable to the manufacturer. The required thermal budget of the CDS was achieved by thermo-mechanical optimization of its components, like process pipes fixed supports in Bayonet Cans. △ Less

Submitted 20 August, 2024; originally announced August 2024.

Comments: 32nd Linear Accelerator Conference (LINAC 2024)

Report number: FERMILAB-CONF-24-0448-PIP2-TD

Optical chiral microrobot for out-of-plane rotation

Authors: Alaa M. Ali, Edison Gerena, Julio Andrés Iglesias Martínez, Gwenn Ulliac, Brahim Lemkalli, Abdenbi Mohand-Ousaid, Sinan Haliyo, Aude Bolopion, Muamer Kadic

Abstract: Optical microrobots (OPTOBOTs) have garnered significant interest, particularly in the medical field, due to their potential for precise cell manipulation in various biological studies and microsurgical applications. Previously described OPTOBOTs demonstrate multiple degrees of freedom, yet improvements are needed, especially in achieving reliable out-of-plane rotation. Here, we propose an OPTOBOT… ▽ More Optical microrobots (OPTOBOTs) have garnered significant interest, particularly in the medical field, due to their potential for precise cell manipulation in various biological studies and microsurgical applications. Previously described OPTOBOTs demonstrate multiple degrees of freedom, yet improvements are needed, especially in achieving reliable out-of-plane rotation. Here, we propose an OPTOBOT design based on chirality that enables full-cycle out-of-plane rotations using optical tweezers. The OPTOBOT has an arrow-like structure with two handles aligned on the same axis, maintaining its horizontal orientation and facilitating controlled movement. Additionally, the OPTOBOT's tail is a chiral helix, which induces repetitive out-of-plane rotations around its longer axis when targeted by a laser beam that is due to broken axial parity. Finite element analysis is employed to design the OPTOBOT and assess its capacity to generate mono-directional high optical torque. Experimental results confirm various actuation modes, supporting future integration of OPTOBOTs in complex micromanipulation tasks. △ Less

Submitted 7 July, 2025; v1 submitted 22 July, 2024; originally announced July 2024.

Comments: 13 pages, 9 figures

Longitudinal chiral forces in photonic integrated waveguides to separate particles with realistically small chirality

Authors: Josep Martínez-Romeu, Iago Diez, Sebastian Golat, Francisco J. Rodríguez-Fortuño, Alejandro Martínez

Abstract: Chiral optical forces exhibit opposite signs for the two enantiomeric versions of a chiral molecule or particle. If large enough, these forces might be able to separate enantiomers all optically, which would find numerous applications in different fields, from pharmacology to chemistry. Longitudinal chiral forces are especially promising for tackling the challenging scenario of separating particle… ▽ More Chiral optical forces exhibit opposite signs for the two enantiomeric versions of a chiral molecule or particle. If large enough, these forces might be able to separate enantiomers all optically, which would find numerous applications in different fields, from pharmacology to chemistry. Longitudinal chiral forces are especially promising for tackling the challenging scenario of separating particles of realistically small chiralities. In this work, we study the longitudinal chiral forces arising in dielectric integrated waveguides when the quasi-TE and quasi-TM modes are combined as well as their application to separate absorbing and non-absorbing chiral particles. We show that chiral gradient forces dominate in the scenario of beating of non-denegerate TE and TM modes when considering non-absorbing particles. For absorbing particles, the superposition of degenerate TE and TM modes can lead to chiral forces that are kept along the whole waveguide length. We accompany the calculations of the forces with particle tracking simulations for specific radii and chirality parameters. We show that longitudinal forces can separate non-absorbing chiral nanoparticles in water even for relatively low values of the particle chirality and absorbing particles with arbitrarily low values of chirality can be effectively separated after enough interaction time. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: 23 pages, 10 figures

Cascaded injection locking of optomechanical crystal oscillators

Authors: David Alonso-Tomás, Guillermo Arregui, Laura Mercadé, Alejandro Martínez, Amadeu Griol, Néstor E. Capuj, Daniel Navarro-Urrios

Abstract: Optomechanical oscillators stand out as high-performance and versatile candidates for serving as reference clocks in sequential photonic integrated circuits. Indeed, they have the unique capability of simultaneously generating mechanical tones and optical signal modulations at frequencies determined by their geometrical design. In this context, the concept of synchronization introduces a powerful… ▽ More Optomechanical oscillators stand out as high-performance and versatile candidates for serving as reference clocks in sequential photonic integrated circuits. Indeed, they have the unique capability of simultaneously generating mechanical tones and optical signal modulations at frequencies determined by their geometrical design. In this context, the concept of synchronization introduces a powerful means to precisely coordinate the dynamics of multiple oscillators in a controlled manner, thus increasing efficiency and preventing errors in signal processing photonic systems or communication interfaces. In this work, we demonstrate the cascaded injection locking of a pair of silicon-based optomechanical crystal cavities to an external reference signal that subtly modulates the laser driving one of the oscillators. Both cavities interact solely through a weak mechanical link, making the extension of this synchronization mechanism to an increased number of optomechanical oscillators within a common chip more feasible than relying solely on optical interactions. Thus, the combination of the obtained results, supported by a numerical model, with remote optical injection locking schemes discussed in the literature, lays the groundwork for the distribution of reference signals within large networks of processing elements in future phonon-photon hybrid circuits. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Journal ref: APL Photonics 9, 116108 (2024)

Self-Adaptive Integrated Photonic Receiver for Turbulence Compensation in Free Space Optical Links

Authors: Andres Ivan Martinez, Gabriele Cavicchioli, Seyedmohammad Seyedinnavadeh, Francesco Zanetto, Marco Sampietro, Alessandro DAcierno, Francesco Morichetti, Andrea Melloni

Abstract: In Free Space Optical (FSO) communication systems, atmospheric turbulence distorts the propagating beams, causing a random fading in the received power. This perturbation can be compensated using a multi-aperture receiver that samples the distorted wavefront on different points and adds the various signals coherently. In this work, we report on an adaptive optical receiver that compensates in real… ▽ More In Free Space Optical (FSO) communication systems, atmospheric turbulence distorts the propagating beams, causing a random fading in the received power. This perturbation can be compensated using a multi-aperture receiver that samples the distorted wavefront on different points and adds the various signals coherently. In this work, we report on an adaptive optical receiver that compensates in real time for scintillation in FSO links. The optical front-end of the receiver is entirely integrated in a silicon photonic chip hosting a 2D Optical Antenna Array and a self-adaptive analog Programmable Optical Processor made of a mesh of tunable Mach-Zehnder interferometers. The photonic chip acts as an adaptive interface to couple turbulent FSO beams to single-mode guided optics, enabling energy and cost-effective operation, scalability to systems with a larger number of apertures, modulation-format and data-protocol transparency, and pluggability with commercial fiber optics transceivers. Experimental results demonstrate the effectiveness of the proposed receiver with optical signals at a data rate of 10 Gbit/s transmitted in indoor FSO links where different turbulent conditions, even stronger than those expected in outdoor links of hundreds of meters, are reproduced. △ Less

Submitted 8 June, 2024; originally announced June 2024.

Experimental Evaluation of All-Optical Up- and Down-Conversion of 3GPP 5G NR Signals using an Optomechanical Crystal Cavity Frequency Comb

Authors: Vicente Fito, Raúl Ortiz, Maria Morant, Laura Mercadé, Roberto Llorente, Alejandro Martínez

Abstract: Optomechanical crystal cavities (OMCCs) allow the interaction between localized optical and mechanical modes through the radiation-pressure force. Driving such cavities with blue-detuned lasers relative to the optical resonance can induce a phonon lasing regime where the OMCC supports self-sustained mechanical oscillations. This dynamic state results in a narrow and stable microwave tone that modu… ▽ More Optomechanical crystal cavities (OMCCs) allow the interaction between localized optical and mechanical modes through the radiation-pressure force. Driving such cavities with blue-detuned lasers relative to the optical resonance can induce a phonon lasing regime where the OMCC supports self-sustained mechanical oscillations. This dynamic state results in a narrow and stable microwave tone that modulates the laser at integer multiples of the mechanical resonance frequency, ultimately creating an optomechanical (OM) frequency comb suitable for microwave photonics applications. OMCCs enable compact, low-cost power-efficient all-photonic processing of multiple microwave signals, crucial for current 5G and future beyond-5G systems, whilst being compatible with silicon integrated photonic circuits. This work reports the experimental demonstration of all-optical multi-frequency up- and down-conversion of 3GPP 5G new-radio (NR) signals from the low- to mid- and extended-mid bands using the first and second harmonics of the frequency comb generated in a silicon OMCC. The OM comb generates up to 6 harmonics in the K-band, which is suitable for microwave photonic applications. The experimental demonstration also evaluates the impact of the phase-noise and the signal-to-noise ratio (SNR) in the frequency-converted 5G NR signals when the first and second OMCC harmonics are employed for frequency conversion. △ Less

Submitted 7 June, 2024; originally announced June 2024.

Identifying stable communities in Hi-C data using a multifractal null model

Authors: Lucas Hedström, Antón Carcedo Martínez, Ludvig Lizana

Abstract: Chromosome capture techniques like Hi-C have expanded our understanding of mammalian genome 3D architecture and how it influences gene activity. To analyze Hi-C data sets, researchers increasingly treat them as DNA-contact networks and use standard community detection techniques to identify mesoscale 3D communities. However, there are considerable challenges in finding significant communities beca… ▽ More Chromosome capture techniques like Hi-C have expanded our understanding of mammalian genome 3D architecture and how it influences gene activity. To analyze Hi-C data sets, researchers increasingly treat them as DNA-contact networks and use standard community detection techniques to identify mesoscale 3D communities. However, there are considerable challenges in finding significant communities because the Hi-C networks have cross-scale interactions and are almost fully connected. This paper presents a pipeline to distil 3D communities that remain intact under experimental noise. To this end, we bootstrap an ensemble of Hi-C datasets representing noisy data and extract 3D communities that we compare with the unperturbed dataset. Notably, we extract the communities by maximizing local modularity (using the Generalized Louvain method), which considers the multifractal spectrum recently discovered in Hi-C maps. Our pipeline finds that stable communities (under noise) typically have above-average internal contact frequencies and tend to be enriched in active chromatin marks. We also find they fold into more nested cross-scale hierarchies than less stable ones. Apart from presenting how to systematically extract robust communities in Hi-C data, our paper offers new ways to generate null models that take advantage of the network's multifractal properties. We anticipate this has a broad applicability to several network applications. △ Less

Submitted 8 May, 2024; originally announced May 2024.

Optomechanical cavities based on epitaxial GaP on nominally (001)-oriented Si

Authors: Paula Mouriño, Laura Mercadé, Miguel Sinusía Lozano, Raquel Resta, Amadeu Griol, Karim Ben Saddik, Enrique Barrigón, Sergio Fernández-Garrido, Basilio Javier García, Alejandro Martínez, Víctor J. Gómez

Abstract: Gallium phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of op… ▽ More Gallium phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 $^o$C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5 %, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities show optical quality factors between 10$^3$ and 10$^4$, and localized mechanical resonances at frequencies around 3.1 GHz. Both optical and mechanical resonances are close to those previously reported on crystalline GaP structures. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers. △ Less

Submitted 28 March, 2024; originally announced March 2024.

Comments: 11 pages, 5 figures

Multi-Blade detector with VMM3a-ASIC-based readout: installation and commissioning at the reflectometer Amor at PSI

Authors: F. Piscitelli, F. Ghazi Moradi, F. S. Alves, M. J. Christensen, J. Hrivnak, A. Johansson, K. Fissum, C. C. Lai, A. Monera Martinez, D. Pfeiffer, E. Shahu, J. Stahn, P. O. Svensson

Abstract: The Multi-Blade (MB) Boron-10-based neutron detector is the chosen technology for three instruments at the European Spallation Source (ESS): the two ESS reflectometers, ESTIA and FREIA, and the Test Beam Line. A fourth MB detector has been built, installed and commissioned for the user operation of the reflectometer Amor at PSI (Switzerland). Amor can be considered a downscaled version of the ESS… ▽ More The Multi-Blade (MB) Boron-10-based neutron detector is the chosen technology for three instruments at the European Spallation Source (ESS): the two ESS reflectometers, ESTIA and FREIA, and the Test Beam Line. A fourth MB detector has been built, installed and commissioned for the user operation of the reflectometer Amor at PSI (Switzerland). Amor can be considered a downscaled version of the ESS reflectometer ESTIA. They are based on the same Selene guide concept, optimized for performing focusing reflectometry on small samples. The experience gained at Amor is invaluable for the future deployment of the MB detector at the ESS. This manuscript describes the MB detector construction and installation at Amor along with the readout electronics chain based on the VMM3a ASIC. The readout chain deployed at Amor is equivalent of that of the ESS, including the readout master module (RMM), event-formation-units (EFUs), Kafka, FileWriter and live visualisation tools. △ Less

Submitted 18 March, 2024; v1 submitted 13 February, 2024; originally announced February 2024.

Comments: 16 pages, 12 figures

Journal ref: 2024 JINST 19 P05010

Influence of thermal effects on the optomechanical coupling rate in acousto-optic cavities

Authors: Raúl Ortiz, Laura Mercadé, Alberto Grau, Daniel Navarro-Urrios, Alejandro Martínez

Abstract: Optomechanical (OM) cavities simultaneously localize photons and phonons, thus enhancing their mutual interaction through radiation-pressure force. This acousto-optic interaction can be quantified by means of the optical frequency shift per mechanical displacement G. The aforesaid frequency shift can also be related to the vacuum OM coupling rate, g0, where only photoelastic (PE) and moving bounda… ▽ More Optomechanical (OM) cavities simultaneously localize photons and phonons, thus enhancing their mutual interaction through radiation-pressure force. This acousto-optic interaction can be quantified by means of the optical frequency shift per mechanical displacement G. The aforesaid frequency shift can also be related to the vacuum OM coupling rate, g0, where only photoelastic (PE) and moving boundaries (MB) effects are commonly taken into account. However, the thermo-optic (TO) and thermal expansion (ThE) effects may also play a role since the material forming the OM cavity could be heated by the presence of photons, which should naturally affect the mechanical properties of the cavity. In this work, we introduce a new theoretical approach to determine how thermal effects change the canonical OM coupling rate. To test the model, a complete set of optical-thermal-mechanical simulations has been performed in two OM crystal cavities fabricated from two different materials: silicon and diamond. Our results lead us to conclude that there is a non-negligible thermal correction that is always present as a negative shift to the OM coupling rate that should be considered in order to predict more accurately the strength of the OM interaction. △ Less

Submitted 9 January, 2024; originally announced January 2024.

Long time behaviour of the solution of Maxwell's equations in dissipative generalized Lorentz materials (II) A modal approach

Authors: Maxence Cassier, Patrick Joly, Luis Alejandro Rosas Martínez

Abstract: This work concerns the analysis of electromagnetic dispersive media modelled by generalized Lorentz models. More precisely, this paper is the second of two articles dedicated to the long time behaviour of solutions of Maxwell's equations in dissipative Lorentz media, via the long time decay rate of the electromagnetic energy for the corresponding Cauchy problem. In opposition to the frequency depe… ▽ More This work concerns the analysis of electromagnetic dispersive media modelled by generalized Lorentz models. More precisely, this paper is the second of two articles dedicated to the long time behaviour of solutions of Maxwell's equations in dissipative Lorentz media, via the long time decay rate of the electromagnetic energy for the corresponding Cauchy problem. In opposition to the frequency dependent Lyapunov functions approach used in [Cassier, Joly, Rosas Martínez, Z. Angew. Math. Phys. 74 (2023), 115], we develop a method based on the spectral analysis of the underlying non-self-adjoint operator of the model. Although more involved, this approach is closer to physics, as it uses the dispersion relation of the model, and has the advantage to provide more precise and more optimal results, leading to distinguish the notion of weak and strong dissipation. △ Less

Submitted 7 October, 2024; v1 submitted 19 December, 2023; originally announced December 2023.

Comments: 68 pages, 4 figures

MSC Class: 35Q60; 78A25; 35P99; 37L15

Observation of ultra-high-Q resonators in the ultrasound via bound states in the continuum

Authors: Mohamed Farhat, Younes Achaoui, Julio A. Iglesias Martinez, Mahmoud Addouche, Ying Wu, Abdelkrim Khelif

Abstract: The confinement of waves in open systems represents a fundamental phenomenon extensively explored across various branches of wave physics. Recently, significant attention has been directed towards bound states in the continuum (BIC), a class of modes that are trapped but do not decay in an otherwise unbounded continuum. Here, we theoretically investigate and experimentally demonstrate the existenc… ▽ More The confinement of waves in open systems represents a fundamental phenomenon extensively explored across various branches of wave physics. Recently, significant attention has been directed towards bound states in the continuum (BIC), a class of modes that are trapped but do not decay in an otherwise unbounded continuum. Here, we theoretically investigate and experimentally demonstrate the existence of quasi-BIC (QBIC) for ultrasonic waves by leveraging an elastic Fabry-Pérot metasurface resonator. We unveil several intriguing properties of the ultrasound QBIC that are robust to parameter scanning, and we present experimental evidence of a remarkable Q-factor of 350 at around 1 MHz frequency, far exceeding the state-of-the-art using a fully acoustic underwater system. Our findings contribute novel insights into the understanding of BIC for acoustic waves, offering a new paradigm for the design of efficient, ultra-high Q-factor ultrasound devices. △ Less

Submitted 13 February, 2024; v1 submitted 9 December, 2023; originally announced December 2023.

Comments: 9 pages, 5 figures

Chiral forces in longitudinally invariant dielectric photonic waveguides

Authors: Josep Martínez-Romeu, Iago Díez, Sebastian Golat, Francisco J. Rodríguez-Fortuño, Alejandro Martínez

Abstract: Optical forces can be chiral when they exhibit opposite signs for the two enantiomeric versions of a chiral molecule or particle. Such forces could be eventually used to separate enantiomers, which could find application in numerous disciplines. Here, we analyze numerically the optical chiral forces arising in the basic element of photonic integrated circuitry: a dielectric waveguide with rectangu… ▽ More Optical forces can be chiral when they exhibit opposite signs for the two enantiomeric versions of a chiral molecule or particle. Such forces could be eventually used to separate enantiomers, which could find application in numerous disciplines. Here, we analyze numerically the optical chiral forces arising in the basic element of photonic integrated circuitry: a dielectric waveguide with rectangular cross-section. Such waveguides are inherently lossless thus generating chiral forces that are invariant in the longitudinal direction and therefore enable enantiomeric separation over long (cm-scale) distances. Assuming Brownian motion in a liquid environment, we calculate first the force strength and time span needed to perform the separation of chiral nanoparticles as a function of the radii. Then we analyze the chiral forces produced by the fundamental quasi-TE guided mode in a silicon nitride waveguide and show that it can lead to enantiomeric separation via the transverse spin at short wavelengths (405 nm). At longer wavelengths (1310 nm), the proper combination of degenerate quasi-TE and quasi-TM modes would result in a quasi-circularly polarized mode with intrinsic chirality (helicity), leading to chiral gradient forces that also enable the enantiomeric separation of smaller nanoparticles. We report particle tracking simulations where the optical force field produced by a quasi-TE and a quasi-circular mode proved to separate enantiomers under a time span of two seconds. Our results suggest the viability of enantiomeric separation using simple photonic integrated circuits, though different wavelength windows should be selected according to the nanoparticle size. △ Less

Submitted 25 October, 2023; originally announced October 2023.

Comments: 19 pages, 6 figures

Early Career Perspectives For the NASA SMD Bridge Program

Authors: Jenna M. Cann, Arturo O. Martinez, Amethyst Barnes, Sara Doan, Feyi Ilesanmi, Margaret Lazzarini, Teresa Monsue, Carlos Pinedo, Nicole Cabrera Salazar, Amy Steele

Abstract: In line with the Astro2020 Decadal Report State of the Profession findings and the NASA core value of Inclusion, the NASA Science Mission Directorate (SMD) Bridge Program was created to provide financial and programmatic support to efforts that work to increase the representation and inclusion of students from under-represented minorities in the STEM fields. To ensure an effective program, particu… ▽ More In line with the Astro2020 Decadal Report State of the Profession findings and the NASA core value of Inclusion, the NASA Science Mission Directorate (SMD) Bridge Program was created to provide financial and programmatic support to efforts that work to increase the representation and inclusion of students from under-represented minorities in the STEM fields. To ensure an effective program, particularly for those who are often left out of these conversations, the NASA SMD Bridge Program Workshop was developed as a way to gather feedback from a diverse group of people about their unique needs and interests. The Early Career Perspectives Working Group was tasked with examining the current state of bridge programs, academia in general, and its effect on students and early career professionals. The working group, comprised of 10 early career and student members, analyzed the discussions and responses from workshop breakout sessions and two surveys, as well as their own experiences, to develop specific recommendations and metrics for implementing a successful and supportive bridge program. In this white paper, we will discuss the key themes that arose through our work, and highlight select recommendations for the NASA SMD Bridge Program to best support students and early career professionals. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Comments: White paper developed by the Early Career Perspectives Working Group for the NASA SMD Bridge Program Workshop. 11 pages

Optical chiral sorting forces and their manifestation in evanescent waves and nanofibres

Authors: Sebastian Golat, Jack J. Kingsley-Smith, Iago Diez, Josep Martinez-Romeu, Alejandro Martínez, Francisco J. Rodríguez-Fortuño

Abstract: Optical fields can exert forces of chiral nature on molecules and nanoparticles, which would prove extremely valuable in the separation of enantiomers with pharmaceutical applications, yet it is inherently complex, and the varied frameworks used in the literature further complicate the theoretical understanding. This paper unifies existing approaches used to describe dipolar optical forces and int… ▽ More Optical fields can exert forces of chiral nature on molecules and nanoparticles, which would prove extremely valuable in the separation of enantiomers with pharmaceutical applications, yet it is inherently complex, and the varied frameworks used in the literature further complicate the theoretical understanding. This paper unifies existing approaches used to describe dipolar optical forces and introduces a new symmetry-based `force basis' consisting of twelve vector fields, each weighted by particle-specific coefficients, for a streamlined description of force patterns. The approach is rigorously applied to evanescent waves and dielectric nanofibres, yielding concise analytical expressions for optical forces. Through this, we identify optimal strategies for enantiomer separation, offering invaluable guidance for future experiments. △ Less

Submitted 17 October, 2023; originally announced October 2023.

Comments: 18 pages, 5 figures

Journal ref: Phys. Rev. Research 6, 023079 (2024)

Master-Slave synchronization of silicon optomechanical nanobeam oscillators by external feedback

Authors: David Alonso-Tomás, Nestor E. Capuj, Laura Mercadé, Amadeu Griol, Alejadro Martínez, Daniel Navarro-Urrios

Abstract: The remote synchronization of oscillators is essential for improving the performance, efficiency, and reliability of various systems and technologies, ranging from everyday telecommunications to cutting-edge scientific research and emerging technologies. In this work, we unequivocally demonstrate a master-slave type of synchronization between two self-sustained optomechanical crystal oscillators t… ▽ More The remote synchronization of oscillators is essential for improving the performance, efficiency, and reliability of various systems and technologies, ranging from everyday telecommunications to cutting-edge scientific research and emerging technologies. In this work, we unequivocally demonstrate a master-slave type of synchronization between two self-sustained optomechanical crystal oscillators that interact solely through an external optical feedback stage. Several pieces of experimental evidence rule out the possibility of resonant forcing, and, in contrast to previous works, indicate that synchronization is achieved in the regime of natural dynamics suppression. Our experimental results are in agreement with the predictions of a numerical model describing the specific mechanical lasing dynamics of each oscillator and the unidirectional interaction between them. The outcomes of our study pave the way toward the synchronization of clock signals corresponding to far-placed processing elements in a future synchronous photonic integrated circuit. △ Less

Submitted 29 September, 2023; originally announced September 2023.

Electron-detachment cross sections for O$^-$ + N$_2$ near the free-collision-model velocity threshold

Authors: A. A. Martínez, M. M. Sant'Anna, G. Hinojosa

Abstract: We present measurements of the total projectile-electron-loss cross sections in O$^-$ + N$_2$ collisions in the energy range from 2.5 to 8.5 keV. Two different techniques, beam attenuation and the growth rate, are employed. The difference between the values obtained with the two methods is explained under the hypothesis of a contribution from anionic metastable auto-detaching states. Under this hy… ▽ More We present measurements of the total projectile-electron-loss cross sections in O$^-$ + N$_2$ collisions in the energy range from 2.5 to 8.5 keV. Two different techniques, beam attenuation and the growth rate, are employed. The difference between the values obtained with the two methods is explained under the hypothesis of a contribution from anionic metastable auto-detaching states. Under this hypothesis, the long-standing question of a strong disagreement among reported measurements at the low-energy range is also explained. The cross sections measured using the growth-rate method show a threshold behavior. We analyze the cross-section velocity dependence in the framework of a collision between a quasi-free electron, loosely bound to the projectile, and the molecular target. Within the free collision model, we deduce and test a simple analytical expression for the expected velocity threshold taking into account the angular distribution of electron velocities within the anion. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: Experimental research on negative ions, 9 pages, 5 figures

Warm Compressor system Overview and status of the PIP-II cryogenic system

Authors: A Martinez, J Creus Prats, W Soyars, R Dhuley, B Hansen, Y Jia, A Chakravarty, M Goyal, T Banaszkiewicz, P Duda, M Stanclik

Abstract: The Proton Improvement Plan-II (PIP-II) is a major upgrade to the Fermilab accelerator complex, featuring a new 800-MeV Superconducting Radio-Frequency (SRF) linear accelerator (Linac) powering the accelerator complex to provide the world's most intense high-energy neutrino beam. The PIP-II Linac consists of 23 SRF cryomodules operating at 2 K, 5 K, and 40 K temperature levels supplied by a single… ▽ More The Proton Improvement Plan-II (PIP-II) is a major upgrade to the Fermilab accelerator complex, featuring a new 800-MeV Superconducting Radio-Frequency (SRF) linear accelerator (Linac) powering the accelerator complex to provide the world's most intense high-energy neutrino beam. The PIP-II Linac consists of 23 SRF cryomodules operating at 2 K, 5 K, and 40 K temperature levels supplied by a single helium cryoplant providing 2.5 kW of cooling capacity at 2.0 K. The PIP-II cryogenic system consists of two major systems: a helium cryogenic plant and a cryogenic distribution system. The cryogenic plant includes a refrigerator cold box, a warm compressor system, and helium storage, recovery, and purification systems. The cryogenic distribution system includes a distribution box, intermediate transfer line, and a tunnel transfer line consisting of modular bayonet cans which supply and return cryogens to the cryomodules. A turnaround can is located at the end of the Linac to turnaround cryogenic flows. This paper describes the layout, design, and current status of the PIP-II cryogenic system. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Comments: 2023 Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC/ICMC)

Report number: FERMILAB-CONF-23-350-TD

Mapping Election Polarization and Competitiveness using Election Results

Authors: Carlos Navarrete, Mariana Macedo, Viktor Stojkoski, Marcela Parada-Contzen, Christopher A Martínez

Abstract: The simplified hypothesis that an election is polarized as an explanation of recent electoral outcomes worldwide is centered on perceptions of voting patterns rather than ideological data from the electorate. While the literature focuses on measuring polarization using ideological-like data from electoral studies-which are limited to economically advantageous countries and are representative mostl… ▽ More The simplified hypothesis that an election is polarized as an explanation of recent electoral outcomes worldwide is centered on perceptions of voting patterns rather than ideological data from the electorate. While the literature focuses on measuring polarization using ideological-like data from electoral studies-which are limited to economically advantageous countries and are representative mostly to national scales-we argue that, in fact, voting patterns can lead to mapping effective proxies of citizen divisions on election day. This paper perspectives two complementary concepts, Election Polarization (EP) and Election Competitiveness (EC), as a means to understand voting patterns on Election Day. We present an agnostic approach that relies solely on election data and validate it using synthetic and real-world election data across 13 countries in the Eurozone, North America, Latin America, and New Zealand. Overall, we find that we can label and distinguish expectations of polarized and competitive elections in these countries, and we report that EP positively correlates with a metric of political polarization in the U.S., unlocking opportunities for studies of polarization at the regional level and for lower/middle-income countries where electoral studies are available, but surveys are limited. △ Less

Submitted 27 July, 2024; v1 submitted 16 August, 2023; originally announced August 2023.

On-Surface Synthesis and Characterization of a High-Spin Aza-[5]-Triangulene

Authors: Manuel Vilas-Varela, Francisco Romero-Lara, Alessio Vegliante, Jan Patrick Calupitan, Adrián Martínez, Lorenz Meyer, Unai Uriarte-Amiano, Niklas Friedrich, Dongfei Wang, Natalia E. Koval, María E. Sandoval-Salinas, David Casanova, Martina Corso, Emilio Artacho, Diego Peña, Jose Ignacio Pascual

Abstract: Triangulenes are open-shell triangular graphene flakes with total spin increasing with their size. In the last years, on-surface-synthesis strategies have permitted fabricating and engineering triangulenes of various sizes and structures with atomic precision. However, direct proof of the increasing total spin with their size remains elusive. In this work, we report the combined in-solution and on… ▽ More Triangulenes are open-shell triangular graphene flakes with total spin increasing with their size. In the last years, on-surface-synthesis strategies have permitted fabricating and engineering triangulenes of various sizes and structures with atomic precision. However, direct proof of the increasing total spin with their size remains elusive. In this work, we report the combined in-solution and on-surface synthesis of a large nitrogen-doped triangulene (aza-[5]-triangulene) and the detection of its high spin ground state on a Au(111) surface. Bond-resolved scanning tunneling microscopy images uncovered radical states distributed along the zigzag edges, which were detected as weak zero-bias resonances in scanning tunneling spectra. These spectral features reveal the partial Kondo screening of a high spin state. Through a combination of several simulation tools, we find that the observed distribution of radical states is explained by a quintet ground state (S = 2), instead of the expected quartet state (S = 3/2), confirming the positively charged state of the molecule on the surface. We further provide a qualitative description of the change of (anti)aromaticity introduced by N-substitution, and its role in the charge stabilization on a surface, resulting in a S = 2 aza-[5]-triangulene on Au(111). △ Less

Submitted 29 June, 2023; originally announced June 2023.

Comments: 8 pages with 4 figures

An N-loop potential energy model for levitated mm-scale magnets in cm-scale superconducting coaxial microwave resonators

Authors: Jeffrey Miller, Nabin K. Raut, Demitrius Zulevic, Harold Hart, Luis A. Martinez, Alessandro Castelli, Raymond Chiao, Jay E. Sharping

Abstract: The levitation of a macroscopic object within a superconducting resonator provides a unique and novel platform to study optomechanics, quantum information, and gravitational wave detection. Existing mirror-method and single-loop models for calculating magnet levitation are insufficient for predicting the position and motion of the levitated magnet. If the cavity-magnet interaction is modeled using… ▽ More The levitation of a macroscopic object within a superconducting resonator provides a unique and novel platform to study optomechanics, quantum information, and gravitational wave detection. Existing mirror-method and single-loop models for calculating magnet levitation are insufficient for predicting the position and motion of the levitated magnet. If the cavity-magnet interaction is modeled using a large number of smaller surface current loops, one can quantitatively model the dynamics of the levitation of the magnet within the cavity. The magnet's most-likely position and orientation can be predicted for non-trivial cavity geometries and cavity orientations. Knowing the potential energy landscape within the cavity configuration also provides a means to estimate the resonant mechanical frequencies at which the levitated magnet vibrates, and enables tailoring the cavity design for specific outcomes. △ Less

Submitted 14 June, 2023; originally announced June 2023.

Comments: 10 pages, 10 figures, submitting to PRA

Micro-scale graded mechanical metamaterials exhibiting versatile Poisson's ratio

Authors: K. K. Dudek, L. Mizzi, J. A. Iglesias Martínez, A. Spaggiari, G. Ulliac, R. Gatt, J. N. Grima, V. Laude, M. Kadic

Abstract: The ability to control Poisson's ratio of functional materials has been one of the main objectives of researchers attempting to develop structures efficient from the perspective of protective, biomedical and soundproofing devices. This task becomes even more challenging at small scales, such as the microscale, where the possibility to control mechanical properties of functional materials is very s… ▽ More The ability to control Poisson's ratio of functional materials has been one of the main objectives of researchers attempting to develop structures efficient from the perspective of protective, biomedical and soundproofing devices. This task becomes even more challenging at small scales, such as the microscale, where the possibility to control mechanical properties of functional materials is very significant, like in the case of flexible electronics. In this work, we propose novel microscopic 2D and 3D functionally-graded mechanical metamaterials capable of exhibiting a broad range of Poisson's ratio depending on their composition. More specifically, we show that upon adjusting the number of structural elements corresponding to one type of the substructure at the expense of another, it is possible to change the resultant Poisson's ratio of the entire system from highly positive to highly negative values as well as to achieve arbitrary intermediate values. Finally, in addition to static properties, we also analyze the dynamic properties of these structures. Namely, we show how the variation in the composition of the considered mechanical metamaterials affects the velocity of a wave propagating through the system. This, in turn, could be essential in the case of applications utilizing localized wave attenuation or sensors. △ Less

Submitted 26 May, 2023; originally announced May 2023.

Comments: This article was published in the journal Composite Structures: https://doi.org/10.1016/j.compstruct.2023.117151

Journal ref: Compos. Struct. 319, 117151 (2023)

Photo-strobo-acoustic Imaging at the Microscale by Laser-Induced Ultrasound

Authors: Jonathan Ulises Alvarez MArtinez, Castro-Beltrán R, Polo-Parada Luis, Gerardo Gutierres-Juarez

Abstract: The combination of microfluidic technology and optical fluids characterization techniques has been recently applied to produce lab-on-a-chip systems. In the present work, bringing together the imaging technique called photoacoustic imaging (PAI) and microfluidic technology were implemented to obtain micro-scale imaging. Laser-induced ultrasound signals were measured from microdroplets produced in… ▽ More The combination of microfluidic technology and optical fluids characterization techniques has been recently applied to produce lab-on-a-chip systems. In the present work, bringing together the imaging technique called photoacoustic imaging (PAI) and microfluidic technology were implemented to obtain micro-scale imaging. Laser-induced ultrasound signals were measured from microdroplets produced in a simple T-junction microfluidic system. Single pulse laser images were produced as a result of the combination of the aforementioned techniques, allowing to obtain of geometrical information of the microdroplets and its spatial position. △ Less

Submitted 27 March, 2023; originally announced March 2023.

Comments: Manuscript in process

Crystallization of piezoceramic films on glass via flash lamp annealing

Authors: Longfei Song, Juliette Cardoletti, Alfredo Blazquez Martinez, Andreja Bencan, Brigita Kmet, Stephanie Girod, Emmanuel Defay, Sebastjan Glinsek

Abstract: Integration of thin-film oxide piezoelectrics on glass is imperative for the next generation of transparent electronics to attain sensing and actuating functions. However, their crystallization temperature (above 650 °C) is incompatible with most glasses. We developed a flash lamp process for growth of piezoelectric lead zirconate titanate films. The process enables crystallization on various type… ▽ More Integration of thin-film oxide piezoelectrics on glass is imperative for the next generation of transparent electronics to attain sensing and actuating functions. However, their crystallization temperature (above 650 °C) is incompatible with most glasses. We developed a flash lamp process for growth of piezoelectric lead zirconate titanate films. The process enables crystallization on various types of glasses in a few seconds only. Functional properties of these films are comparable to the films processed with standard rapid thermal annealing at 700 °C. A surface haptic device was fabricated with a 1 $\unicode{x00B5}$m-thick film (piezoelectric e$_{33,f}$ of -5 C m$^{-2}$). Its ultrasonic surface deflection reached 1.5 $\unicode{x00B5}$m at 60 V, sufficient for its use in surface rendering applications. This flash lamp annealing process is compatible with large glass sheets and roll-to-roll processing and has the potential to significantly expand the applications of piezoelectric devices on glass. △ Less

Submitted 29 February, 2024; v1 submitted 23 March, 2023; originally announced March 2023.

Comments: 53 pages, 18 figures

Plasma induced surface modification of sapphire and its influence on graphene grown by PECVD

Authors: Miguel Sinusia Lozano, Ignacio Bernat-Montoya, Todora Ivanova Angelova, Alberto Boscá Mojena, Francisco J. Díaz-Fernández, Miroslavna Kovylina, Alejandro Martínez, Elena Pinilla Cienfuegos, Víctor J. Gómez

Abstract: The catalyst-free synthesis of graphene on dielectrics prevents the damage induced by the transfer process. Although challenging, to master this synthesis would boost the integration of graphene on consumer electronics since defects hinder its optoelectronic properties. In this work, the influence of the different surface terminations of c-plane sapphire substrates on the synthesis of graphene via… ▽ More The catalyst-free synthesis of graphene on dielectrics prevents the damage induced by the transfer process. Although challenging, to master this synthesis would boost the integration of graphene on consumer electronics since defects hinder its optoelectronic properties. In this work, the influence of the different surface terminations of c-plane sapphire substrates on the synthesis of graphene via plasma-enhanced chemical vapour deposition (PECVD) is studied. The different terminations of the sapphire surface are controlled by a plasma etching process. A design of experiments (DoE) procedure was carried out to evaluate the major effects governing the etching process of four different parameters: i.e. discharge power, time, pressure and gas employed. In the characterization of the substrate, two sapphire surface terminations were identified and characterized by means of contact angle measurements, being a hydrophilic (hydrophobic) surface the fingerprint of an Al- (OH-) terminated surface, respectively. The defects within the synthesized graphene were analysed by Raman spectroscopy. Notably, we found that the ID/IG ratio decreases for graphene grown on OH-terminated surfaces. Furthermore, two different regimes related to the nature of graphene defects were identified and depending on the sapphire terminated surface are bound either to vacancy or boundary like defects. Finally, studying the density of defects and the crystallite area, as well as their relationship with the sapphire surface termination paves the way for increasing the crystallinity of the synthesized graphene. △ Less

Submitted 1 March, 2023; originally announced March 2023.

Comments: 27 pages, 6 figures

Double-pulse streamer simulations for varying interpulse times in air

Authors: H. Malla, A. Martinez, U. Ebert, J. Teunissen

Abstract: In this paper, we study how streamer discharges are influenced by a previous voltage pulse using an axisymmetric fluid model. We simulate double-pulse positive streamers in N2-O2 mixtures containing 20% and 10% O2 at 1 bar. By varying the time between the pulses between 5 ns and 10 microseconds, we observe three regimes during the second pulse: streamer continuation, inhibited growth and streamer… ▽ More In this paper, we study how streamer discharges are influenced by a previous voltage pulse using an axisymmetric fluid model. We simulate double-pulse positive streamers in N2-O2 mixtures containing 20% and 10% O2 at 1 bar. By varying the time between the pulses between 5 ns and 10 microseconds, we observe three regimes during the second pulse: streamer continuation, inhibited growth and streamer repetition. In the streamer continuation regime, a new streamer emerges from the tip of the previous one. In the inhibited regime, the previous channel is partially re-ionized, but there is considerably less field enhancement and almost no light emission. Finally, for the longest interpulse times, a new streamer forms that is similar to the first one. The remaining electron densities at which we observe streamer continuation agree with earlier experimental work. We introduce an estimate which relates streamer continuation to the dielectric relaxation time, the background field and the pulse duration. Furthermore, we show that for interpulse times above 100 ns several electron detachment reactions significantly slow down the decay of the electron density. △ Less

Submitted 13 November, 2023; v1 submitted 22 February, 2023; originally announced February 2023.

Journal ref: Plasma Sources Sci. Technol. 32 095006 (2023)

Scattering-matrix approach for a quantitative evaluation of the topological protection in valley photonic crystals

Authors: Gaëtan Lévêque, Yan Pennec, Pascal Szriftgiser, Alberto Amo, Alejandro Martínez

Abstract: In this work, we use valley-topological triangular resonators coupled to an input waveguide to evaluate the quality of the topological protection. To that purpose, we first analyze via numerical simulations the existence of backward scattering at cavity corners or transmission with pseudo-spin conversion at the splitter between the input waveguide and the cavity. We evidence that a breakdown of to… ▽ More In this work, we use valley-topological triangular resonators coupled to an input waveguide to evaluate the quality of the topological protection. To that purpose, we first analyze via numerical simulations the existence of backward scattering at cavity corners or transmission with pseudo-spin conversion at the splitter between the input waveguide and the cavity. We evidence that a breakdown of topological protection takes place, in particular at sharp corners, which results in transmission minima and split-resonances, otherwise non-existent. In order to evaluate the small coupling coefficients associated to this breakdown, a phenomenological model based on an exact parameterization of scattering matrices at splitters and corners of the resonators is then introduced. By comparison with the numerical simulations, we are able to quantify the loss of topological protection at sharp bends and splitters. Finally, we use the obtained set of phenomenological parameters to compare the predictions of the phenomenological model with full numerical simulations for fractal-inspired cavities based on the Sierpiński triangle construction. We show that the agreement is overall good, but shows more differences for the cavity composed of the smallest triangles. Our results suggest that even in a system exempt of geometrical and structural defects, topological protection is not complete at corners, sharp bends and splitters. However, simpler but predictive calculations can be realized with a phenomenological approach, allowing simulations of very large devices beyond the reach of standard simulation methods, which is crucial to design photonic devices which gather compactness and low losses through topological conduction of electromagnetic waves. △ Less

Submitted 4 July, 2023; v1 submitted 22 January, 2023; originally announced January 2023.

Comments: 24 pages, 7 figures, one supplementary informations file

Characterization and Control of the Run-and-Tumble Dynamics of {\it Escherichia Coli}

Authors: Christina Kurzthaler, Yongfeng Zhao, Nan Zhou, Jana Schwarz-Linek, Clemence Devailly, Jochen Arlt, Jian-Dong Huang, Wilson C. K. Poon, Thomas Franosch, Julien Tailleur, Vincent A. Martinez

Abstract: We characterize the full spatiotemporal gait of populations of swimming {\it Escherichia coli} using renewal processes to analyze the measurements of intermediate scattering functions. This allows us to demonstrate quantitatively how the persistence length of an engineered strain can be controlled by a chemical inducer and to report a controlled transition from perpetual tumbling to smooth swimmin… ▽ More We characterize the full spatiotemporal gait of populations of swimming {\it Escherichia coli} using renewal processes to analyze the measurements of intermediate scattering functions. This allows us to demonstrate quantitatively how the persistence length of an engineered strain can be controlled by a chemical inducer and to report a controlled transition from perpetual tumbling to smooth swimming. For wild-type {\it E.~coli}, we measure simultaneously the microscopic motility parameters and the large-scale effective diffusivity, hence quantitatively bridging for the first time small-scale directed swimming and macroscopic diffusion. △ Less

Submitted 21 December, 2022; originally announced December 2022.

Journal ref: Phys. Rev. Lett. 132, 038302 (2024)

Quantitative characterization of run-and-tumble statistics in bulk bacterial suspensions

Authors: Yongfeng Zhao, Christina Kurzthaler, Nan Zhou, Jana Schwarz-Linek, Clemence Devailly, Jochen Arlt, Jian-Dong Huang, Wilson C. K. Poon, Thomas Franosch, Vincent A. Martinez, Julien Tailleur

Abstract: We introduce a numerical method to extract the parameters of run-and-tumble dynamics from experimental measurements of the intermediate scattering function. We show that proceeding in Laplace space is unpractical and employ instead renewal processes to work directly in real time. We first validate our approach against data produced using agent-based simulations. This allows us to identify the leng… ▽ More We introduce a numerical method to extract the parameters of run-and-tumble dynamics from experimental measurements of the intermediate scattering function. We show that proceeding in Laplace space is unpractical and employ instead renewal processes to work directly in real time. We first validate our approach against data produced using agent-based simulations. This allows us to identify the length and time scales required for an accurate measurement of the motility parameters, including tumbling frequency and swim speed. We compare different models for the run-and-tumble dynamics by accounting for speed variability at the single-cell and population level, respectively. Finally, we apply our approach to experimental data on wild-type Escherichia coli obtained using differential dynamic microscopy. △ Less

Submitted 21 December, 2022; originally announced December 2022.

Comments: 10 pages, 5 figures

Journal ref: Phys. Rev. E 109, 014612 (2024)

Remarks on propagating waves in non-linear vacuum electrodynamics

Authors: M. Ángeles Pérez-García, A. Pérez Martínez, E. Rodríguez Querts

Abstract: Using the quadratic expansion in the photon fields of Euler-Heisenberg (EH) non-linear electrodynamics (NLED) Lagrangian model we study relevant vacuum properties in a scenario involving the propagation of a photon probe in the presence of a background constant and static magnetic field, ${\bf B_e}$. We compute the gauge invariant, symmetric and conserved energy-momentum tensor (EMT) and angular m… ▽ More Using the quadratic expansion in the photon fields of Euler-Heisenberg (EH) non-linear electrodynamics (NLED) Lagrangian model we study relevant vacuum properties in a scenario involving the propagation of a photon probe in the presence of a background constant and static magnetic field, ${\bf B_e}$. We compute the gauge invariant, symmetric and conserved energy-momentum tensor (EMT) and angular momentum tensor (AMT) for arbitrary magnetic field strength using the Hilbert method under the soft-photon approximation. We discuss how the presence of magneto-electric terms in the EH Lagrangian is a source of anisotropy, induce the non-zero trace in the EMT and leads to differences between EMT calculated by the Hilbert or Noether method. From the Hilbert EMT we analyze some quantities of interest such as the energy density, pressures, Poynting vector, and angular momentum vector, comparing and discussing the differences with respect to the improved Noether method. The magnetized vacuum properties are also studied showing that a photon effective magnetic moment can be defined for different polarization modes. The calculations are done in terms of derivatives of the two scalar invariants of electrodynamics, hence, extension to other NLED Lagrangian is straightforward. We discuss further physical implications and experimental strategies to test magnetization, photon pressure, and effective magnetic moment. △ Less

Submitted 20 September, 2023; v1 submitted 9 December, 2022; originally announced December 2022.

Comments: 16 pages, 3 figures, matches published version

Journal ref: Eur. Phys. J. C (2023) 83:746

Variable Dual Auxeticity of the Hierarchical Mechanical Metamaterial composed of Re-entrant Structural Motifs

Authors: Krzysztof K. Dudek, Julio A. Iglesias Martínez, Muamer Kadic

Abstract: In this work, a novel hierarchical mechanical metamaterial is proposed that is composed of re-entrant truss-lattice elements. It is shown that this system can deform very differently and can exhibit a versatile extent of the auxetic behaviour depending on a small change in the thickness of its hinges. In addition, depending on which hierarchical level is deforming, the whole structure can exhibit… ▽ More In this work, a novel hierarchical mechanical metamaterial is proposed that is composed of re-entrant truss-lattice elements. It is shown that this system can deform very differently and can exhibit a versatile extent of the auxetic behaviour depending on a small change in the thickness of its hinges. In addition, depending on which hierarchical level is deforming, the whole structure can exhibit a different type of auxetic behaviour that corresponds to a unique deformation mechanism. This results in a dual auxetic structure where the interplay between the two auxetic mechanisms determines the evolution of the system. It is also shown that depending on the specific deformation pattern, it is possible to observe a very different behaviour of the structure in terms of frequencies of waves that can be transmitted through the system. In fact, it is demonstrated that even a very small change in the parametric design of the system may result in a significantly different band gap formation that can be useful in the design of tunable vibration dampers or sensors. The possibility of controlling the extent of the auxeticity also makes the proposed metamaterial to be very appealing from the point of view of protective and biomedical devices. △ Less

Submitted 11 November, 2022; originally announced November 2022.

Comments: This paper was published in the journal Physica Status Solidi B, doi: https://doi.org/10.1002/pssb.202200404

Journal ref: Phys. Status Solidi B, 2200404 (2022)