-
FerroHEMTs: High-Current and High-Speed All-Epitaxial AlScN/GaN Ferroelectric Transistors
Authors:
J. Casamento,
K. Nomoto,
T. S. Nguyen,
H. Lee,
C. Savant,
L. Li,
A. Hickman,
T. Maeda,
J. Encomendero,
V. Gund,
A. Lal,
J. C. M. Hwang,
H. G. Xing,
D. Jena
Abstract:
We report the first observation of ferroelectric gating in AlScN barrier wide-bandgap nitride transistors. These FerroHEMT devices realized by direct epitaxial growth represent a new class of ferroelectric transistors in which the semiconductor is itself polar, and the crystalline ferroelectric barrier is lattice-matched to the substrate. The FerroHEMTs reported here use the thinnest nitride high…
▽ More
We report the first observation of ferroelectric gating in AlScN barrier wide-bandgap nitride transistors. These FerroHEMT devices realized by direct epitaxial growth represent a new class of ferroelectric transistors in which the semiconductor is itself polar, and the crystalline ferroelectric barrier is lattice-matched to the substrate. The FerroHEMTs reported here use the thinnest nitride high K and ferroelectric barriers to date to deliver the highest on currents at 4 A/mm, and highest speed AlScN transistors with fmax larger than 150 GHz observed in any ferroelectric transistor. The FerroHEMTs exhibit hysteretic Id Vgs loops with subthreshold slopes below the Boltzmann limit. A control AlN barrier HEMT exhibits neither hysteretic, nor sub Boltzmann behavior. While these results introduce the first epitaxial high K and ferroelectric barrier technology to RF and mm wave electronics, they are also of interest as a new material platform for combining memory and logic functionalities in digital electronics.
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
A translation of Maurice Philippson's "Principles of the Electrical Resistance of Living Tissue"
Authors:
James C. M. Hwang,
Olivia Peytral-Rieu
Abstract:
The impedance of one cubic centimeter of living tissues of potato and guinea pig were measured from 500 Hz to 3 MHz. In general, the magnitude of the impedance was found to monotonically decrease with increasing frequency. This implies that the membrane of each cell in the tissue acts like a capacitor, which is in parallel with a membrane resistance. The membrane resistance and capacitance togethe…
▽ More
The impedance of one cubic centimeter of living tissues of potato and guinea pig were measured from 500 Hz to 3 MHz. In general, the magnitude of the impedance was found to monotonically decrease with increasing frequency. This implies that the membrane of each cell in the tissue acts like a capacitor, which is in parallel with a membrane resistance. The membrane resistance and capacitance together are in series with a protoplasm resistance. Experimentally, it was observed that after the guinea pig died, the membrane resistance of its muscle decreased from 1.49 to 0.79 kilo-ohm while the protoplasm resistance remained around 0.11 kilo-ohm. By contrast, when the potato started to germinate, the protoplasm resistance decreased from 0.25 to 0.10 kilo-ohm, while its membrane resistance remained around 4 kilo-ohms.
△ Less
Submitted 28 October, 2020;
originally announced May 2021.
-
Inverted Scanning Microwave Microscope for In Vitro Imaging and Characterization of Biological Cells
Authors:
Marco Farina,
Xin Jin,
Gianluca Fabi,
Eleonora Pavoni,
Andrea di Donato,
Davide Mencarelli,
Antonio Morini,
Francesco Piacenza,
Richard Al Hadi,
Yan Zhao,
Tiziana Pietrangelo,
Xuanhong Cheng,
James C. M. Hwang
Abstract:
This paper presents for the first time an innovative instrument called an inverted scanning microwave microscope (iSMM), which is capable of noninvasive and label-free imaging and characterization of intracellular structures of a live cell on the nanometer scale. In particular, the iSMM is sensitive to not only surface structures, but also ectromagnetic properties up to one micrometer below the su…
▽ More
This paper presents for the first time an innovative instrument called an inverted scanning microwave microscope (iSMM), which is capable of noninvasive and label-free imaging and characterization of intracellular structures of a live cell on the nanometer scale. In particular, the iSMM is sensitive to not only surface structures, but also ectromagnetic properties up to one micrometer below the surface. Conveniently, the iSMM can be constructed through straightforward conversion of any scanning probe microscope, such as the atomic force microscope or the scanning tunneling microscope, with a simple metal probe to outperform traditional SMM in terms of ruggedness, and width, sensitivity and dynamic range. By contrast, the application of the traditional SMM to date has been limited to mainly surface physics and semiconductor technology, because the traditional SMM requires a fragile and expensive probe and is incompatible with saline solution or live biological cells.
△ Less
Submitted 13 March, 2019; v1 submitted 11 March, 2019;
originally announced March 2019.
-
Large-Scale Fabrication of RF MOSFETs on Liquid-Exfoliated MoS2
Authors:
Kuanchen Xiong,
Lei Li,
Asher Madjar,
James C. M. Hwang,
Zhaoyang Lin,
Yu Huang,
Xiangfeng Duan,
Alexander Goritz,
Matthias Wietstruck,
Mehmet Kaynak
Abstract:
For the first time, thousands of RF MOSFETs were batch-fabricated on liquid-exfoliated MoS2 below 300 °C with nearly 100% yield. The large-scale fabrication with high yield allowed the average performance instead of the best performance to be reported. The DC performance of these devices were typical, but the RF performance, enabled by buried gates and on the order of 100 MHz, was reported for the…
▽ More
For the first time, thousands of RF MOSFETs were batch-fabricated on liquid-exfoliated MoS2 below 300 °C with nearly 100% yield. The large-scale fabrication with high yield allowed the average performance instead of the best performance to be reported. The DC performance of these devices were typical, but the RF performance, enabled by buried gates and on the order of 100 MHz, was reported for the first time for liquid-exfoliated MoS2. To resolve the dilemma of thin vs. thick films, gate recess was used on 20-nm thick films to improve the gate control while keeping the contact resistance lower than that on 10-nm films. These innovations may enable thin-film transistors to operate in the microwave range.
△ Less
Submitted 27 March, 2018;
originally announced March 2018.
-
Rugged HBT Class-C Power Amplifiers with Base-Emitter Clamping
Authors:
Xi Luo,
Subrata Halder,
James C. M. Hwang
Abstract:
The ruggedness of HBT Class-C power amplifiers was improved by adding an anti-parallel diode to the amplifier input to limit the negative swing of the base-emitter voltage. The improved amplifier could withstand 3:1 instead of 2:1 mismatch in CW operation, and 2.5:1 instead of 1.5:1 mismatch in pulse operation. In contrast to other approaches with emitter ballast, active feedback, or electrostatic…
▽ More
The ruggedness of HBT Class-C power amplifiers was improved by adding an anti-parallel diode to the amplifier input to limit the negative swing of the base-emitter voltage. The improved amplifier could withstand 3:1 instead of 2:1 mismatch in CW operation, and 2.5:1 instead of 1.5:1 mismatch in pulse operation. In contrast to other approaches with emitter ballast, active feedback, or electrostatic discharge protection circuits, the present approach is simple to implement and has negligible impact on overall amplifier output power, gain or efficiency.
△ Less
Submitted 27 July, 2017;
originally announced August 2017.
-
Scaling and High-Frequency Performance of AlN/GaN HEMTs
Authors:
Xi Luo,
Subrata Halder,
Walter R. Curtice,
James C. M. Hwang,
Kelson D. Chabak,
Dennis E. Walker, Jr.,
Amir M. Dabiran
Abstract:
Small- and large-signal RF characteristics were measured on AlN GaN HEMTs with 80-160 nm gate length and 100-300 μm width. Consistent with the literature, current-gain cut-off frequency and maximum frequency of oscillation were found to increase with inverse gate length and independent of gate width. For the first time, output power and efficiency were reported at the high end of Xband, and were c…
▽ More
Small- and large-signal RF characteristics were measured on AlN GaN HEMTs with 80-160 nm gate length and 100-300 μm width. Consistent with the literature, current-gain cut-off frequency and maximum frequency of oscillation were found to increase with inverse gate length and independent of gate width. For the first time, output power and efficiency were reported at the high end of Xband, and were comparable to the best reported at 2 GHz and insensitive to gate length or width. These results suggest that the AlN/GaN HEMTs can be further scaled for even higher frequency and higher power performance.
△ Less
Submitted 27 July, 2017;
originally announced July 2017.
-
Scanning Microwave Microscopy of Aluminum CMOS Interconnect Lines Buried in Oxide and Water
Authors:
Xin Jin,
Kuanchen Xiong,
Roderick Marstell,
Nicholas C. Strandwitz,
James C. M. Hwang,
Marco Farina,
Alexander Göritz,
Matthias Wietstruck,
Mehmet Kaynak
Abstract:
Using a scanning microwave microscope, we imaged in water aluminum interconnect lines buried in aluminum and silicon oxides fabricated through a state-of-the-art 0.13 um SiGe BiCMOS process. The results were compared with that obtained by using atomic force microscopy both in air and water. It was found the images in water was degraded by only approximately 60% from that in air.
Using a scanning microwave microscope, we imaged in water aluminum interconnect lines buried in aluminum and silicon oxides fabricated through a state-of-the-art 0.13 um SiGe BiCMOS process. The results were compared with that obtained by using atomic force microscopy both in air and water. It was found the images in water was degraded by only approximately 60% from that in air.
△ Less
Submitted 22 June, 2017;
originally announced June 2017.