-
Imaging High Jitter, Very Fast Phenomena: A Remedy for Shutter Lag
Authors:
Noah Hoppis,
Kathryn M. Sturge,
Jonathan E. Barney,
Brian L. Beaudoin,
Ariana M. Bussio,
Ashley E. Hammell,
Samuel L. Henderson,
James E. Krutzler,
Joseph P. Lichthardt,
Alexander H. Mueller,
Karl Smith,
Bryce C. Tappan,
Timothy W. Koeth
Abstract:
Dielectric breakdown is an example of a natural phenomenon that occurs on very short time scales, making it incredibly difficult to capture optical images of the process. Event initiation jitter is one of the primary challenges, as even a microsecond of jitter time can cause the imaging attempt to fail. Initial attempts to capture images of dielectric breakdown with a gigahertz frame rate camera a…
▽ More
Dielectric breakdown is an example of a natural phenomenon that occurs on very short time scales, making it incredibly difficult to capture optical images of the process. Event initiation jitter is one of the primary challenges, as even a microsecond of jitter time can cause the imaging attempt to fail. Initial attempts to capture images of dielectric breakdown with a gigahertz frame rate camera and an exploding bridge wire initiation were stymied by high initiation jitter. Subsequently, a novel optical delay line apparatus was developed in order to effectively circumvent the jitter and reliably image dielectric breakdown. The design and performance of the optical delay line apparatus are presented. The optical delay line increased the image capture success rate from 25% to 94% while also permitting enhanced temporal resolution and has applications for use in imaging other high-jitter, extremely fast phenomena.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Determination of energy-dependent neutron backgrounds using shadow bars
Authors:
S. N. Paneru,
K. W. Brown,
F. C. E Teh,
K. Zhu,
M. B. Tsang,
D. DellAquila,
Z. Chajecki,
W. G. Lynch,
S. Sweany,
C. Y. Tsang,
A. K. Anthony,
J. Barney,
J. Estee,
I. Gasparic,
G. Jhang,
O. B. Khanal,
J. Mandredi,
C. Y. Niu,
R. S. Wang,
J. C. Zamora
Abstract:
Understanding the neutron background is essential for determining the neutron yield from nuclear reactions. In the analysis presented here, the shadow bars are placed in front of neutron detectors to determine the energy dependent neutron background fractions. The measurement of neutron spectra with and without shadow bars is important to determine the neutron background more accurately. The neutr…
▽ More
Understanding the neutron background is essential for determining the neutron yield from nuclear reactions. In the analysis presented here, the shadow bars are placed in front of neutron detectors to determine the energy dependent neutron background fractions. The measurement of neutron spectra with and without shadow bars is important to determine the neutron background more accurately. The neutron background, along with its sources and systematic uncertainties, are explored with a focus on the impact of background models and their dependence on neutron energy.
△ Less
Submitted 19 December, 2022;
originally announced December 2022.
-
Beam Particle Identification and Tagging of Incompletely Stripped Heavy Beams with HEIST
Authors:
A. K. Anthony,
C. Y. Niu,
R. S. Wang,
J. Wieske,
K. W. Brown,
Z. Chajecki,
W. G. Lynch,
Y. Ayyad,
J. Barney,
T. Baumann,
D. Bazin,
S. Beceiro-Novo,
J. Boza,
J. Chen,
K. J. Cook,
M. Cortesi,
T. Ginter,
W. Mittig,
A. Pype,
M. K. Smith,
C. Soto,
C. Sumithrarachchi,
J. Swaim,
S. Sweany,
F. C. E. Teh
, et al. (4 additional authors not shown)
Abstract:
A challenge preventing successful inverse kinematics measurements with heavy nuclei that are not fully stripped is identifying and tagging the beam particles. For this purpose, the HEavy ISotope Tagger (HEIST) has been developed. HEIST utilizes two micro-channel plate timing detectors to measure time of flight, a multi-sampling ion chamber to measure energy loss, and a high purity Ge detector to i…
▽ More
A challenge preventing successful inverse kinematics measurements with heavy nuclei that are not fully stripped is identifying and tagging the beam particles. For this purpose, the HEavy ISotope Tagger (HEIST) has been developed. HEIST utilizes two micro-channel plate timing detectors to measure time of flight, a multi-sampling ion chamber to measure energy loss, and a high purity Ge detector to identify isomer decays and calibrate the isotope identification system. HEIST has successfully identified $^{198}$Pb and other nearby nuclei at energies of about 75 MeV/A. In the experiment discussed, a typical cut containing 89\% of all $^{198}$Pb$^{+80}$ in the beam had a purity of 86\%. We examine the issues of charge state contamination. The observed charge state populations of these ions are presented and are moderately well described by the charge state model GLOBAL.
△ Less
Submitted 23 August, 2021; v1 submitted 28 July, 2021;
originally announced July 2021.
-
The S$π$RIT Time Projection Chamber
Authors:
J. Barney,
J. Estee,
W. G. Lynch,
T. Isobe,
G. Jhang,
M. Kurata-Nishimura,
A. B. McIntosh,
T. Murakami,
R. Shane,
S. Tangwancharoen,
M. B. Tsang,
G. Cerizza,
M. Kaneko,
J. W. Lee,
C. Y. Tsang,
R. Wang,
C. Anderson,
H. Baba,
Z. Chajecki,
M. Famiano,
R. Hodges-Showalter,
B. Hong,
T. Kobayashi,
P. Lasko,
J. Łukasik
, et al. (15 additional authors not shown)
Abstract:
The SAMURAI Pion Reconstruction and Ion-Tracker Time Projection Chamber (S$π$RIT TPC) was designed to enable measurements of heavy ion collisions with the SAMURAI spectrometer at the RIKEN Radioactive Isotope Beam Factory and provide constraints on the Equation of State of neutron-rich nuclear matter. The S$π$RIT TPC has a 50.5 cm drift length and an 86.4 cm $\times$ 134.4 cm pad plane with 12,096…
▽ More
The SAMURAI Pion Reconstruction and Ion-Tracker Time Projection Chamber (S$π$RIT TPC) was designed to enable measurements of heavy ion collisions with the SAMURAI spectrometer at the RIKEN Radioactive Isotope Beam Factory and provide constraints on the Equation of State of neutron-rich nuclear matter. The S$π$RIT TPC has a 50.5 cm drift length and an 86.4 cm $\times$ 134.4 cm pad plane with 12,096 pads that are equipped with the Generic Electronics for TPCs readout electronics. The S$π$RIT TPC allows excellent reconstruction of particles and provides isotopic resolution for pions and other light charged particles across a wide range of energy losses and momenta. Details of the S$π$RIT TPC are presented, along with discussion of the TPC performance based on cosmic ray and experimental data.
△ Less
Submitted 21 May, 2020;
originally announced May 2020.
-
Value-assigned pulse shape discrimination for neutron detectors
Authors:
F. C. E. Teh,
J. -W. Lee,
K. Zhu,
K. W. Brown,
Z. Chajecki,
W. G. Lynch,
M. B. Tsang,
A. Anthony,
J. Barney,
D. Dell'Aquila,
J. Estee,
B. Hong,
G. Jhang,
O. B. Khanal,
Y. J. Kim,
H. S. Lee,
J. W. Lee,
J. Manfredi,
S. H. Nam,
C. Y. Niu,
J. H. Park,
S. Sweany,
C. Y. Tsang,
R. Wang,
H. Wu
Abstract:
Using the waveforms from a digital electronic system, an offline analysis technique on pulse shape discrimination (PSD) has been developed to improve the neutron-gamma separation in a bar-shaped NE-213 scintillator that couples to a photomultiplier tube (PMT) at each end. The new improved method, called the ``valued-assigned PSD'' (VPSD), assigns a normalized fitting residual to every waveform as…
▽ More
Using the waveforms from a digital electronic system, an offline analysis technique on pulse shape discrimination (PSD) has been developed to improve the neutron-gamma separation in a bar-shaped NE-213 scintillator that couples to a photomultiplier tube (PMT) at each end. The new improved method, called the ``valued-assigned PSD'' (VPSD), assigns a normalized fitting residual to every waveform as the PSD value. This procedure then facilitates the incorporation of longitudinal position dependence of the scintillator, which further enhances the PSD capability of the detector system. In this paper, we use radiation emitted from an AmBe neutron source to demonstrate that the resulting neutron-gamma identification has been much improved when compared to the traditional technique that uses the geometric mean of light outputs from both PMTs. The new method has also been modified and applied to a recent experiment at the National Superconducting Cyclotron Laboratory (NSCL) that uses an analog electronic system.
△ Less
Submitted 17 June, 2021; v1 submitted 15 January, 2020;
originally announced January 2020.
-
Charged particle track reconstruction with S$π$RIT Time Projection Chamber
Authors:
J. W. Lee,
G. Jhang,
G. Cerizza,
J. Barney,
J. Estee,
T. Isobe,
M. Kaneko,
M. Kurata-Nishimura,
W. G. Lynch,
T. Murakami,
C. Y. Tsang,
M. B. Tsang,
R. Wang,
B. Hong,
A. B. McIntosh,
H. Sakurai,
C. Santamaria,
R. Shane,
S. Tangwancharoen,
S. J. Yennello,
Y. Zhang
Abstract:
In this paper, we present a software framework, S$π$RITROOT, which is capable of track reconstruction and analysis of heavy-ion collision events recorded with the S$π$RIT time projection chamber. The track-fitting toolkit GENFIT and the vertex reconstruction toolkit RAVE are applied to a box-type detector system. A pattern recognition algorithm which performs helix track finding and handles overla…
▽ More
In this paper, we present a software framework, S$π$RITROOT, which is capable of track reconstruction and analysis of heavy-ion collision events recorded with the S$π$RIT time projection chamber. The track-fitting toolkit GENFIT and the vertex reconstruction toolkit RAVE are applied to a box-type detector system. A pattern recognition algorithm which performs helix track finding and handles overlapping pulses is described. The performance of the software is investigated using experimental data obtained at the Radioactive Isotope Beam Facility (RIBF) at RIKEN. This work focuses on data from $^{132}$Sn + $^{124}$Sn collision events with beam energy of 270 AMeV. Particle identification is established using $\left<dE/dx\right>$ and magnetic rigidity, with pions, hydrogen isotopes, and helium isotopes.
△ Less
Submitted 10 January, 2020;
originally announced January 2020.
-
Space Charge Effects in the S$π$RIT Time Projection Chamber
Authors:
C. Y. Tsang,
J. Estee,
R. Wang,
J. Barney,
G. Jhang,
W. G. Lynch,
Z. Q. Zhang,
G. Cerizza,
T. Isobe,
M. Kaneko,
M. Kurata-Nishimura,
J. W. Lee,
T. Murakami,
M. B. Tsang,
S$π$RIT collaboration
Abstract:
Time projection chambers (TPCs) are widely used in nuclear and particle physics. They are particularly useful when measuring reaction products from heavy ion collisions. Most nuclear experiments at low energy are performed in a fixed target configuration, in which the unreacted beam will pass through the detection volume. As the beam intensity increases, the buildup of positive ions created from t…
▽ More
Time projection chambers (TPCs) are widely used in nuclear and particle physics. They are particularly useful when measuring reaction products from heavy ion collisions. Most nuclear experiments at low energy are performed in a fixed target configuration, in which the unreacted beam will pass through the detection volume. As the beam intensity increases, the buildup of positive ions created from the ionization of the detector gas by the beam creates the main source of space charge, distorting the nominal electric field of the TPC. This has a profound effect on the accuracy of the measured momenta of the emitted particles. In this paper we will discuss the magnitude of the effects and construct an observable more appropriate for fixed target experiments to study the effects. We also will present an algorithm for correcting the space charge and some of the implications it has on the momentum determination.
△ Less
Submitted 29 January, 2020; v1 submitted 23 December, 2019;
originally announced December 2019.
-
Non-linearity effects on the light-output calibration of light charged particles in CsI(Tl) scintillator crystals
Authors:
D. Dell'Aquila,
S. Sweany,
K. W. Brown,
Z. Chajecki,
W. G. Lynch,
F. C. E. Teh,
C. -Y. Tsang,
M. B. Tsang,
K. Zhu,
C. Anderson,
A. Anthony,
S. Barlini,
J. Barney,
A. Camaiani,
G. Jhang,
J. Crosby,
J. Estee,
M. Ghazali,
F. Guan,
O. Khanal,
S. Kodali,
I. Lombardo,
J. Manfredi,
L. Morelli,
P. Morfouace
, et al. (2 additional authors not shown)
Abstract:
The light output produced by light ions (Z<=4) in CsI(Tl) crystals is studied over a wide range of detected energies (E<=300 MeV). Energy-light calibration data sets are obtained with the 10 cm crystals in the recently upgraded High-Resolution Array (HiRA10). We use proton recoil data from 40,48Ca + CH2 at 28 MeV/u, 56.6 MeV/u, 39 MeV/u and 139.8 MeV/u and data from a dedicated experiment with dir…
▽ More
The light output produced by light ions (Z<=4) in CsI(Tl) crystals is studied over a wide range of detected energies (E<=300 MeV). Energy-light calibration data sets are obtained with the 10 cm crystals in the recently upgraded High-Resolution Array (HiRA10). We use proton recoil data from 40,48Ca + CH2 at 28 MeV/u, 56.6 MeV/u, 39 MeV/u and 139.8 MeV/u and data from a dedicated experiment with direct low-energy beams. We also use the punch through points of p, d, and t particles from 40,48Ca + 58,64Ni, 112,124Sn collisions reactions at 139.8 MeV/u. Non-linearities, arising in particular from Tl doping and light collection efficiency in the CsI crystals, are found to significantly affect the light output and therefore the calibration of the detector response for light charged particles, especially the hydrogen isotopes. A new empirical parametrization of the hydrogen light output, L(E,Z=1,A), is proposed to account for the observed effects. Results are found to be consistent for all 48 CsI(Tl) crystals in a cluster of 12 HiRA10 telescopes.
△ Less
Submitted 21 March, 2019; v1 submitted 18 February, 2019;
originally announced February 2019.
-
On Determining Dead Layer and Detector Thicknesses for a Position-Sensitive Silicon Detector
Authors:
J. Manfredi,
Jenny Lee,
W. G. Lynch,
C. Y. Niu,
M. B. Tsang,
C. Anderson,
J. Barney,
K. W. Brown,
Z. Chajecki,
K. P. Chan,
G. Chen,
J. Estee,
Z. Li,
C. Pruitt,
A. M. Rogers,
A. Sanetullaev,
H. Setiawan,
R. Showalter,
C. Y. Tsang,
J. R. Winkelbauer,
Z. Xiao,
Z. Xu
Abstract:
In this work, two particular properties of the position-sensitive, thick silicon detectors (known as the "E" detectors) in the High Resolution Array (HiRA) are investigated: the thickness of the dead layer on the front of the detector, and the overall thickness of the detector itself. The dead layer thickness for each E detector in HiRA is extracted using a measurement of alpha particles emitted f…
▽ More
In this work, two particular properties of the position-sensitive, thick silicon detectors (known as the "E" detectors) in the High Resolution Array (HiRA) are investigated: the thickness of the dead layer on the front of the detector, and the overall thickness of the detector itself. The dead layer thickness for each E detector in HiRA is extracted using a measurement of alpha particles emitted from a $^{212}$Pb pin source placed close to the detector surface. This procedure also allows for energy calibrations of the E detectors, which are otherwise inaccessible for alpha source calibration as each one is sandwiched between two other detectors. The E detector thickness is obtained from a combination of elastically scattered protons and an energy-loss calculation method. Results from these analyses agree with values provided by the manufacturer.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
-
A Gating Grid Driver for Time Projection Chambers
Authors:
S. Tangwancharoen,
W. G. Lynch,
J. Barney,
J. Estee,
R. Shane,
M. B. Tsang,
Y. Zhang,
T. Isobe,
M. Kurata-Nishimura,
T. Murakami,
Z. G. Xiao,
Y. F. Zhang
Abstract:
A simple but novel driver system has been developed to operate the wire gating grid of a Time Projection Chamber (TPC). This system connects the wires of the gating grid to its driver via low impedance transmission lines. When the gating grid is open, all wires have the same voltage allowing drift electrons, produced by the ionization of the detector gas molecules, to pass through to the anode wir…
▽ More
A simple but novel driver system has been developed to operate the wire gating grid of a Time Projection Chamber (TPC). This system connects the wires of the gating grid to its driver via low impedance transmission lines. When the gating grid is open, all wires have the same voltage allowing drift electrons, produced by the ionization of the detector gas molecules, to pass through to the anode wires. When the grid is closed, the wires have alternating higher and lower voltages causing the drift electrons to terminate at the more positive wires. Rapid opening of the gating grid with low pickup noise is achieved by quickly shorting the positive and negative wires to attain the average bias potential with N-type and P-type MOSFET switches. The circuit analysis and simulation software SPICE shows that the driver restores the gating grid voltage to 90% of the opening voltage in less than 0.20 $μ$s. When tested in the experimental environment of a time projection chamber larger termination resistors were chosen so that the driver opens the gating grid in 0.35 $μ$s. In each case, opening time is basically characterized by the RC constant given by the resistance of the switches and terminating resistors and the capacitance of the gating grid and its transmission line. By adding a second pair of N-type and P-type MOSFET switches, the gating grid is closed by restoring 99% of the original charges to the wires within 3 $μ$s.
△ Less
Submitted 20 December, 2016;
originally announced December 2016.
-
KATANA - a charge-sensitive triggering system for the S$π$RIT experiment
Authors:
P. Lasko,
M. Adamczyk,
J. Brzychczyk,
P. Hirnyk,
J. Łukasik,
P. Pawłowski,
K. Pelczar,
A. Snoch,
A. Sochocka,
Z. Sosin,
J. Barney,
G. Cerizza,
J. Estee,
T. Isobe,
G. Jhang,
M. Kaneko,
M. Kurata-Nishimura,
W. G. Lynch,
T. Murakami,
C. Santamaria,
M. B. Tsang,
Y. Zhang
Abstract:
KATANA - the Krakow Array for Triggering with Amplitude discrimiNAtion - has been built and used as a trigger and veto detector for the S$π$RIT TPC at RIKEN. Its construction allows operating in magnetic field and providing fast response for ionizing particles, giving the approximate forward multiplicity and charge information. Depending on this information, trigger and veto signals are generated.…
▽ More
KATANA - the Krakow Array for Triggering with Amplitude discrimiNAtion - has been built and used as a trigger and veto detector for the S$π$RIT TPC at RIKEN. Its construction allows operating in magnetic field and providing fast response for ionizing particles, giving the approximate forward multiplicity and charge information. Depending on this information, trigger and veto signals are generated. The article presents performance of the detector and details of its construction. A simple phenomenological parametrization of the number of emitted scintillation photons in plastic scintillator is proposed. The effect of the light output deterioration in the plastic scintillator due to the in-beam irradiation is discussed.
△ Less
Submitted 13 January, 2017; v1 submitted 21 October, 2016;
originally announced October 2016.
-
S$π$RIT: A time-projection chamber for symmetry-energy studies
Authors:
R. Shane,
A. McIntosh,
T. Isobe,
W. G. Lynch,
H. Baba,
J. Barney,
Z. Chajecki,
M. Chartier,
J. Estee,
M. Famiano,
B. Hong,
K. Ieki,
G. Jhang,
R. Lemmon,
F. Lu,
T. Murakami,
N. Nakatsuka,
M. Nishimura,
R. Olsen,
W. Powell,
H. Sakurai,
A. Taketani,
S. Tangwancharoen,
M. B. Tsang,
T. Usukura
, et al. (3 additional authors not shown)
Abstract:
A Time-Projection Chamber (TPC) called the SAMURAI Pion-Reconstruction and Ion-Tracker (S$π$RIT) has recently been constructed at Michigan State University as part of an international effort to constrain the symmetry-energy term in the nuclear Equation of State (EoS). The S$π$RIT TPC will be used in conjunction with the SAMURAI spectrometer at the Radioactive Isotope Beam Factory (RIBF) at RIKEN t…
▽ More
A Time-Projection Chamber (TPC) called the SAMURAI Pion-Reconstruction and Ion-Tracker (S$π$RIT) has recently been constructed at Michigan State University as part of an international effort to constrain the symmetry-energy term in the nuclear Equation of State (EoS). The S$π$RIT TPC will be used in conjunction with the SAMURAI spectrometer at the Radioactive Isotope Beam Factory (RIBF) at RIKEN to measure yield ratios for pions and other light isospin multiplets produced in central collisions of neutron-rich heavy ions, such as $^{132}$Sn + $^{124}$Sn. The S$π$RIT TPC can function both as a TPC detector and as an active target. It has a vertical drift length of 50 cm, parallel to the magnetic field. Gas multiplication is achieved through the use of a multi-wire anode. Image charges are produced in the 12096 pads, and are read out with the recently developed Generic Electronics for TPCs.
△ Less
Submitted 22 September, 2014;
originally announced September 2014.
