Showing 1–8 of 8 results for author: Wittwer, F

3D evolution of protein networks and lipid globules in heat-treated egg yolk

Authors: Felix Wittwer, Nimmi Das Anthuparambil, Frederik Unger, Randeer Pratap Gautam, Silja Flenner, Imke Greving, Christian Gutt, Peter Modregger

Abstract: Upon heating, egg yolk transforms from a liquid to a gel due to protein denaturation. This process can serve as a useful model to better understand protein denaturation in general. Using x-ray holographic tomography, we investigated the structural changes in egg yolk during boiling without the need for complex sample fixation or drying. Our results reveal a developing separation between proteins a… ▽ More Upon heating, egg yolk transforms from a liquid to a gel due to protein denaturation. This process can serve as a useful model to better understand protein denaturation in general. Using x-ray holographic tomography, we investigated the structural changes in egg yolk during boiling without the need for complex sample fixation or drying. Our results reveal a developing separation between proteins and lipids, with fatty components rapidly aggregating into large globules that subsequently evolve into bubbles. △ Less

Submitted 8 April, 2025; originally announced April 2025.

Multi-modal strain mapping of steel crack tips with micrometer spatial resolution

Authors: Ahmar Khaliq, Felix Wittwer, Markus Hartmann, Matthias Thimm, Robert Brandt, Dennis Brueckner, Jan Garrevoet, Gerald Falkenberg, Peter Modregger

Abstract: Due to their superior fatigue strength, martensitic steels are the material of choice for high cyclic loading applications such as coil springs. However, crack propagation is influenced by residual stresses and their interaction is poorly understood. In fact, Linear Elastic Fracture Mechanics predicts un-physical singularities in the strain around the crack tip. In this study, we have combined syn… ▽ More Due to their superior fatigue strength, martensitic steels are the material of choice for high cyclic loading applications such as coil springs. However, crack propagation is influenced by residual stresses and their interaction is poorly understood. In fact, Linear Elastic Fracture Mechanics predicts un-physical singularities in the strain around the crack tip. In this study, we have combined synchrotron-based x-ray diffraction, x-ray fluorescence, and optical microscopy to map the factual strain fields around crack tips with micrometer spatial resolution. X-ray fluorescence and optical images were co-registered to locate the crack in the x-ray diffraction maps. Observed crystal recovery close to cracks confirmed that the diffraction signal originates at least in parts from the cracks. The retrieved local strain field around the crack was further improved by averaging information over carefully selected diffraction peaks. This procedure provided strain maps around crack tips with a spatial resolution of about 1 micro meter and enabled a prediction of further crack growth. △ Less

Submitted 8 April, 2025; originally announced April 2025.

X-ray Strain and Stress Tensor Tomography

Authors: Peter Modregger, James. A. D. Ball, Felix Wittwer, Ahmar Khaliq, Jonathan Wright

Abstract: The microscopic distribution of strain and stress plays a crucial role for the performance, safety, and lifetime of components in aeronautics, automotive and critical infrastructure [1]. While non-destructive methods for measuring the stress close to the surface have long been long established, only a limited number of approaches for depth-resolved measurements based on x-rays or neutrons are avai… ▽ More The microscopic distribution of strain and stress plays a crucial role for the performance, safety, and lifetime of components in aeronautics, automotive and critical infrastructure [1]. While non-destructive methods for measuring the stress close to the surface have long been long established, only a limited number of approaches for depth-resolved measurements based on x-rays or neutrons are available [2]. These feature significant limitations, including long scan times, intricate experimental set-ups, limited spatial resolution or anisotropic gauge volumes with aspect ratios of 1:10 or worse. Here, we present a method that overcomes these limitations and obtains tomographic reconstructions of the full six-dimensional strain and stress tensor components. Using a simple and wide spread experimental set-up that combines x-ray powder diffraction with single axis tomography, we achieve non-destructive determination of depth-resolved strain and stress distributions with isotropic resolution. The presented method could be of interest for additive manufacturing of metals [3,4], battery research [5], in-situ metallurgy [6] and the experimental validation of finite element simulations [7]. △ Less

Submitted 8 April, 2025; originally announced April 2025.

Measurements of dislocations in 4H-SiC with rocking curve imaging

Authors: Ahmar Khaliq, Felix Wittwer, Niklas Pyrlik, Giovanni Fevola, Svenja Patjens, Jackson Barp, Gero Falkenberg, Sven Hampel, Michael Stuckelberger, Jan Garrevoet, Dennis Bruckner, Peter Modregger

Abstract: 4H Silicon Carbide (4H-SiC) combines many attractive properties such as a high carrier mobility, a wide bandgap, and a high thermal conductivity, making it an ideal candidate for high-power electronic devices. However, a primary challenge in utilizing 4H-SiC is the presence of defects in epitaxial layers, which can significantly degrade device performance. In this study, we have used X-ray transmi… ▽ More 4H Silicon Carbide (4H-SiC) combines many attractive properties such as a high carrier mobility, a wide bandgap, and a high thermal conductivity, making it an ideal candidate for high-power electronic devices. However, a primary challenge in utilizing 4H-SiC is the presence of defects in epitaxial layers, which can significantly degrade device performance. In this study, we have used X-ray transmission topography with a rocking curve imaging technique to characterize the types and distribution of defects in 4H-SiC. The derived maps from the fitted Gaussian parameters were used to investigate dislocations in 4H-SiC. Understanding the distribution of the dislocations provides valuable insights into the overall crystal quality, which can guide improvements for the fabrication processes. △ Less

Submitted 30 August, 2024; originally announced September 2024.

Annular x-ray optics offer superior resolution for radiation sensitive samples

Authors: Felix Wittwer, Peter Modregger

Abstract: High-resolution x-ray microscopy requires a high photon flux to measure the signal from weakly scattering samples. This exposes samples to high radiation doses, potentially damaging or destroying them through radiation damage. In this work, we propose the use of annular optics in scanning microscopy as an alternative to full-aperture optics. Annular optics act as high-pass filters. Compared to reg… ▽ More High-resolution x-ray microscopy requires a high photon flux to measure the signal from weakly scattering samples. This exposes samples to high radiation doses, potentially damaging or destroying them through radiation damage. In this work, we propose the use of annular optics in scanning microscopy as an alternative to full-aperture optics. Annular optics act as high-pass filters. Compared to regular optics with the same numerical aperture, annular optics expose the sample to less dose while producing the same signal from small sample features. Annular optics benefit significantly from the high photon fluxes of the latest x-ray sources to compensate for their overall smaller cross section. Using numerical simulations, we show that annular optics offer superior optical performance for sample features close to the resolution limit of the optic. △ Less

Submitted 30 August, 2024; originally announced September 2024.

Parallax in angular sensitive powder diffraction tomography

Authors: Peter Modregger, Ahmar Khaliq, Felix Wittwer

Abstract: While a few methods for the determination of depth-resolved strain distributions each with inherent limitations are available, tomographic reconstruction has been applied to this problem in only a limited sense. One of the challenges was the potential impact of geometric parallax, which constitutes a non-negligible lateral offset of diffraction information arising from different sample depths at t… ▽ More While a few methods for the determination of depth-resolved strain distributions each with inherent limitations are available, tomographic reconstruction has been applied to this problem in only a limited sense. One of the challenges was the potential impact of geometric parallax, which constitutes a non-negligible lateral offset of diffraction information arising from different sample depths at the detector. Here, the effect of parallax was investigated and two main results have emerged. First, the impact of parallax was found to be additive to other offset contributions, which implies a straightforward correction. Second, for tomographic scans utilizing a full 360° rotation parallax has been found to have no impact on reconstructions of angular information. △ Less

Submitted 30 August, 2024; originally announced September 2024.

Object Initialization For Ptychographic Scans With Reduced Overlap

Authors: Felix Wittwer, Peter Modregger

Abstract: X-ray ptychography utilizes overlapping illuminations to reconstruct the object's phase and absorption signal with spatial resolutions much smaller than the focus size. Usually, the illumination overlap is chosen to be between 50% and 60% in order to ensure high quality reconstructions at reasonable scan times and/or doses. Here, we experimentally demonstrate that ptychographic iteration with obje… ▽ More X-ray ptychography utilizes overlapping illuminations to reconstruct the object's phase and absorption signal with spatial resolutions much smaller than the focus size. Usually, the illumination overlap is chosen to be between 50% and 60% in order to ensure high quality reconstructions at reasonable scan times and/or doses. Here, we experimentally demonstrate that ptychographic iteration with object instead of flat initialization allows for a significant reduction of the overlap with only a modest loss in reconstruction quality. This approach could prove beneficial for dose sensitive experiments and for rapid feedback overview scans. △ Less

Submitted 27 July, 2022; originally announced July 2022.

Ptychographic reconstruction with wavefront initialization

Authors: Felix Wittwer, Peter Modregger

Abstract: X-ray ptychography is a cutting edge imaging technique providing ultra-high spatial resolutions. In ptychography, phase retrieval, i.e., the recovery of a complex valued signal from intensity-only measurements, is enabled by exploiting a redundancy of information contained in diffraction patterns measured with overlapping illuminations. For samples that are considerably larger than the probe we sh… ▽ More X-ray ptychography is a cutting edge imaging technique providing ultra-high spatial resolutions. In ptychography, phase retrieval, i.e., the recovery of a complex valued signal from intensity-only measurements, is enabled by exploiting a redundancy of information contained in diffraction patterns measured with overlapping illuminations. For samples that are considerably larger than the probe we show that during the iteration the bulk information has to propagate from the sample edges to the center. This constitutes an inherent limitation of reconstruction speed for algorithms that use a flat initialization. Here, we experimentally demonstrate that a considerable improvement of computational speed can be achieved by utilizing a low resolution sample wavefront retrieved from measured diffraction patterns as initialization. In addition, we show that this approach avoids phase singularity artifacts due to strong phase gradients. Wavefront initialization is computationally fast and compatible with non-bulky samples. Therefore, the presented approach is readily adaptable with established ptychographic reconstruction algorithms implying a wide spread use. △ Less

Submitted 22 May, 2022; originally announced May 2022.