-
Realization of a Spin Glass in a two-dimensional van der Waals material
Authors:
Banabir Pal,
Ajesh K. Gopi,
Yicheng Guan,
Anirban Chakraborty,
Kajal Tiwari,
Anagha Mathew,
Abhay K. Srivastava,
Wenjie Zhang,
Binoy K. Hazra,
Holger Meyerheim,
Stuart S. P. Parkin
Abstract:
Recent advances in van der Waals (vdW) materials have sparked renewed interest in the impact of dimensionality on magnetic phase transitions. While ordered magnetic phases have been demonstrated to survive in the two-dimensional (2D) limit, the quest for a spin-glass with quenched magnetic disorder in lower dimensions has proven elusive. Here we show evidence of a spin-glass emerging from randomly…
▽ More
Recent advances in van der Waals (vdW) materials have sparked renewed interest in the impact of dimensionality on magnetic phase transitions. While ordered magnetic phases have been demonstrated to survive in the two-dimensional (2D) limit, the quest for a spin-glass with quenched magnetic disorder in lower dimensions has proven elusive. Here we show evidence of a spin-glass emerging from randomly distributed Fe atoms in Fe3GeTe2, the first time such a state has been reported in a vdW material. AC magnetic susceptibility displays a strong frequency dependence indicative of slow spin dynamics. Additional distinctive phenomena, including ageing, chaos, and memory effects, further substantiate the existence of a glassy state. Remarkably, we find that this state persists even in single-unit-cell thick Fe3GeTe2, thereby confirming the existence of a 2D spin-glass. The formation of spin-glass states via intercalation in vdW systems allows for highly tunable spin-glass states that are otherwise difficult to realize.
△ Less
Submitted 4 March, 2024;
originally announced March 2024.
-
Introduction to quantum entanglement in many-body systems
Authors:
Anubhav Kumar Srivastava,
Guillem Müller-Rigat,
Maciej Lewenstein,
Grzegorz Rajchel-Mieldzioć
Abstract:
The quantum mechanics formalism introduced new revolutionary concepts challenging our everyday perceptions. Arguably, quantum entanglement, which explains correlations that cannot be reproduced classically, is the most notable of them. Besides its fundamental aspect, entanglement is also a resource, fueling emergent technologies such as quantum simulators and computers. The purpose of this chapter…
▽ More
The quantum mechanics formalism introduced new revolutionary concepts challenging our everyday perceptions. Arguably, quantum entanglement, which explains correlations that cannot be reproduced classically, is the most notable of them. Besides its fundamental aspect, entanglement is also a resource, fueling emergent technologies such as quantum simulators and computers. The purpose of this chapter is to give a pedagogical introduction to the topic with a special emphasis on the multipartite scenario, i.e., entanglement distributed among many degrees of freedom. Due to the combinatorial complexity of this setting, particles can interact and become entangled in a plethora of ways, which we characterize here. We start by providing the necessary mathematical tools and elementary concepts from entanglement theory. A part of this chapter will be devoted to classifying and ordering entangled states. Then, we focus on various entanglement structures useful in condensed-matter theory such as tensor-network states or symmetric states useful for quantum-enhanced sensing. Finally, we discuss state-of-the-art methods to detect and certify such correlations in experiments, with some relevant illustrative examples.
△ Less
Submitted 23 October, 2024; v1 submitted 14 February, 2024;
originally announced February 2024.
-
Modelling the mechanics of 32 T REBCO superconductor magnet using numerical simulation
Authors:
Arpit Kumar Srivastava,
Enric Pardo
Abstract:
High temperature REBCO superconducting tapes are very promising for high-field magnets. Under high magnetic fields there are high electro-mechanical forces, and thus concern for mechanical damage. Due to large screening currents and composite structure of the tape, the mechanical design of these magnets are not straightforward. In addition, many present designs use insulated winding. In this work…
▽ More
High temperature REBCO superconducting tapes are very promising for high-field magnets. Under high magnetic fields there are high electro-mechanical forces, and thus concern for mechanical damage. Due to large screening currents and composite structure of the tape, the mechanical design of these magnets are not straightforward. In addition, many present designs use insulated winding. In this work we develop a novel two-dimensional axisymmetric finite element tool programmed in MATLAB that assumes the displacement field within linear elastic range. The stack of pancakes and a large number of REBCO tape turns are approximated as an anisotropic bulk hollow cylinder. Our results agree with uni-axial stress experiments in literature, validating the bulk approximation. Here, we study the following configuration. The current is first ramp up to below the critical current and we calculate the screening currents and the forces that they cause using the MEMEP model. As a case study 32 T REBCO superconductor magnet is simulated numerically. We have done complete mechanical analysis of the magnet by including the axial and shear mechanical quantities for each pancake unlike previous work where only radial and circumferential quantities are focused. Effect on mechanical quantities without screening current is also calculated and compared. It is shown that including screening current induced field strongly affect the mechanical quantities, specially the shear stress. The latter might be the critical quantity for certain magnet configurations. Additionally, in order to overcome high stresses, a stiff over banding of different material is considered and numerically modelled which significantly reduces the mechanical stresses. The FE based model developed is efficient to calculate the mechanical behaviour of any general superconductor magnet and its devices.
△ Less
Submitted 16 February, 2025; v1 submitted 2 January, 2024;
originally announced January 2024.
-
Topological quantum thermometry
Authors:
Anubhav Kumar Srivastava,
Utso Bhattacharya,
Maciej Lewenstein,
Marcin Płodzień
Abstract:
An optimal local quantum thermometer is a quantum many-body system that saturates the fundamental lower bound for the thermal state temperature estimation accuracy [L. Correa, et. al., Phys. Rev. Lett. 114, 220405 (2015)]. Such a thermometer has a particular energy level structure with a single ground state and highly degenerated excited states manifold, with an energy gap proportional to the esti…
▽ More
An optimal local quantum thermometer is a quantum many-body system that saturates the fundamental lower bound for the thermal state temperature estimation accuracy [L. Correa, et. al., Phys. Rev. Lett. 114, 220405 (2015)]. Such a thermometer has a particular energy level structure with a single ground state and highly degenerated excited states manifold, with an energy gap proportional to the estimated temperature. In this work, we show that the optimal local quantum thermometer can be realized in an experimentally feasible system of spinless fermions confined in a one-dimensional optical lattice described by the Rice-Mele model. We characterize the system's sensitivity to temperature changes in terms of quantum Fisher information and the classical Fisher information obtained from experimentally available site occupation measurements.
△ Less
Submitted 1 August, 2025; v1 submitted 24 November, 2023;
originally announced November 2023.
-
Enhancing quantum state tomography via resource-efficient attention-based neural networks
Authors:
Adriano Macarone Palmieri,
Guillem Müller-Rigat,
Anubhav Kumar Srivastava,
Maciej Lewenstein,
Grzegorz Rajchel-Mieldzioć,
Marcin Płodzień
Abstract:
Resource-efficient quantum state tomography is one of the key ingredients of future quantum technologies. In this work, we propose a new tomography protocol combining standard quantum state reconstruction methods with an attention-based neural network architecture. We show how the proposed protocol is able to improve the averaged fidelity reconstruction over linear inversion and maximum-likelihood…
▽ More
Resource-efficient quantum state tomography is one of the key ingredients of future quantum technologies. In this work, we propose a new tomography protocol combining standard quantum state reconstruction methods with an attention-based neural network architecture. We show how the proposed protocol is able to improve the averaged fidelity reconstruction over linear inversion and maximum-likelihood estimation in the finite-statistics regime, reducing at least by an order of magnitude the amount of necessary training data. We demonstrate the potential use of our protocol in physically relevant scenarios, in particular, to certify metrological resources in the form of many-body entanglement generated during the spin squeezing protocols. This could be implemented with the current quantum simulator platforms, such as trapped ions, and ultra-cold atoms in optical lattices.
△ Less
Submitted 4 September, 2024; v1 submitted 19 September, 2023;
originally announced September 2023.
-
Charge density wave and superconductivity in 6R-TaS2
Authors:
Sudip Pal,
Prakash Bahera,
S. R. Sahoo,
Himanshu Srivastava,
A. K. Srivastava,
N. P. Lalla,
Raman Sankar,
A. Banerjee,
S. B. Roy
Abstract:
The layered transition metal dichalcogenide compounds 1T-TaS2 and 4H-TaS2 are well known for their exotic properties, which include charge density wave, superconductivity, Mott transition, etc., and lately quantum spin liquid. Here, we report the magnetic, transport and transmission electron microscopy study of the charge density wave and superconductivity in 6R-TaS2 which is a relatively less stu…
▽ More
The layered transition metal dichalcogenide compounds 1T-TaS2 and 4H-TaS2 are well known for their exotic properties, which include charge density wave, superconductivity, Mott transition, etc., and lately quantum spin liquid. Here, we report the magnetic, transport and transmission electron microscopy study of the charge density wave and superconductivity in 6R-TaS2 which is a relatively less studied polymorph of this dichalcogenide TaS2. Our high temperature electron microscopy reveals multiple charge density wave transitions between room temperature and 650K. Magnetization, and the electrical resistivity measurements in the temperature range of 2-400 K reveal that 6R-TaS2 undergoes a charge density wave transition around 305 K and is followed by a transition to a superconducting state around 3.5 K. The low temperature specific heat measurement exhibits anomaly associated with the superconducting transition around 2.4 K. The estimated Ginzburg Landau parameter suggests that this compound lies at the extreme limit of type-II superconductivity.
△ Less
Submitted 28 August, 2023; v1 submitted 1 June, 2022;
originally announced June 2022.
-
Anisotropic proximity-induced superconductivity and edge supercurrent in Kagome metal, K1-xV3Sb5
Authors:
Yaojia Wang,
Shuoying Yang,
Pranava K. Sivakumar,
Brenden R. Ortiz,
Samuel M. L. Teicher,
Heng Wu,
Abhay K. Srivastava,
Chirag Garg,
Defa Liu,
Stuart S. P. Parkin,
Eric S. Toberer,
Tyrel McQueen,
Stephen D. Wilson,
Mazhar N. Ali
Abstract:
Materials with transition metals in triangular lattices are of great interest for their potential combination of strong correlation, exotic magnetism and electronic topology. Kagome nets are of particular importance since the discovery of geometrically frustrated magnetism and topological band structures in crystals like Herbertsmithite and Fe3Sn2, respectively. KV3Sb5 was discovered to be a layer…
▽ More
Materials with transition metals in triangular lattices are of great interest for their potential combination of strong correlation, exotic magnetism and electronic topology. Kagome nets are of particular importance since the discovery of geometrically frustrated magnetism and topological band structures in crystals like Herbertsmithite and Fe3Sn2, respectively. KV3Sb5 was discovered to be a layered topological metal with a Kagome net of vanadium. Here, we fabricated Josephson Junctions (JJ) of K1-xV3Sb5 and induced superconductivity over long junction lengths. Through magnetoresistance and current vs. phase measurements, we observed magnetic field sweeping direction dependent magnetoresistance, and an anisotropic interference pattern with a Fraunhofer pattern for in-plane magnetic field, but a suppression of critical current for out-of-plane magnetic field. These results indicate an anisotropic internal magnetic field in K1-xV3Sb5 which influences the superconducting coupling in the junction, possibly giving rise to spin-triplet superconductivity. In addition, the observation of long-lived fast oscillations shows evidence of spatially localized conducting channels arising from edge states. These observations pave the way for studying unconventional superconductivity and Josephson device based on Kagome metals with electron correlation and topology.
△ Less
Submitted 26 January, 2023; v1 submitted 10 December, 2020;
originally announced December 2020.
-
Surface states in bulk single crystal of topological semimetal Co$_3$Sn$_2$S$_2$ towards water oxidation
Authors:
Guowei Li,
Qiunan Xu,
Wujun Shi,
Chenguang Fu,
Lin Jiao,
Machteld E. Kamminga,
Mingquan Yu,
Harun Tüysüz,
Nitesh Kumar,
Vicky Süß,
Rana Saha,
Abhay K. Srivastava,
Steffen Wirth,
Gudrun Auffermann,
Johannes Gooth,
Stuart Parkin,
Yan Sun,
Enke Liu,
Claudia Felser
Abstract:
The band inversion in topological phase matters bring exotic physical properties such as the emergence of a topologically protected surface states. They strongly influence the surface electronic structures of the investigated materials and could serve as a good platform to gain insight into the catalytic mechanism of surface reactions. Here we synthesized high-quality bulk single crystals of the t…
▽ More
The band inversion in topological phase matters bring exotic physical properties such as the emergence of a topologically protected surface states. They strongly influence the surface electronic structures of the investigated materials and could serve as a good platform to gain insight into the catalytic mechanism of surface reactions. Here we synthesized high-quality bulk single crystals of the topological semimetal Co$_3$Sn$_2$S$_2$. We found that at room temperature, Co$_3$Sn$_2$S$_2$ naturally hosts the band structure of a topological semimetal. This guarantees the existence of robust surface states from the Co atoms. Bulk single crystal of Co$_3$Sn$_2$S$_2$ exposes their Kagome lattice that constructed by Co atoms and have high electrical conductivity. They serves as catalytic centers for oxygen evolution process (OER), making bonding and electron transfer more efficient due to the partially filled $e_g$ orbital. The bulk single crystal exhibits outstanding OER catalytic performance, although the surface area is much smaller than that of Co-based nanostructured catalysts. Our findings emphasize the importance of tailoring topological non-trivial surface states for the rational design of high-activity electrocatalysts.
△ Less
Submitted 22 August, 2019;
originally announced August 2019.
-
Unexplored photoluminescence from bulk and mechanically exfoliated few layers of Bi2Te3
Authors:
Bipin Kumar Gupta,
Rabia Sultana,
Satbir Singh,
Vijeta Singh,
Geet Awana,
Anurag Gupta,
Bahadur Singh,
A. K. Srivastava,
O. N. Srivastava,
S. Auluck,
V. P. S. Awana
Abstract:
We report the exotic photoluminescence (PL) behaviour of 3D topological insulator Bi2Te3 single crystals grown by customized self-flux method and mechanically exfoliated few layers (18 plus minus 2 nm)/thin flakes obtained by standard scotch tape method from as grown Bi2Te3 crystals.The experimental PL studies on bulk single crystal and mechanically exfoliated few layers of Bi2Te3 evidenced a broa…
▽ More
We report the exotic photoluminescence (PL) behaviour of 3D topological insulator Bi2Te3 single crystals grown by customized self-flux method and mechanically exfoliated few layers (18 plus minus 2 nm)/thin flakes obtained by standard scotch tape method from as grown Bi2Te3 crystals.The experimental PL studies on bulk single crystal and mechanically exfoliated few layers of Bi2Te3 evidenced a broad red emission in the visible region. These findings are in good agreement with our theoretical results obtained using the ab initio density functional theory framework.
△ Less
Submitted 6 June, 2018;
originally announced June 2018.
-
Thermoelectric signatures of the electron-phonon fluid in PtSn4
Authors:
Chenguang Fu,
Thomas Scaffidi,
Jonah Waissman,
Yan Sun,
Rana Saha,
Sarah J. Watzman,
Abhay K. Srivastava,
Guowei Li,
Walter Schnelle,
Peter Werner,
Machteld E. Kamminga,
Subir Sachdev,
Stuart S. P. Parkin,
Sean A. Hartnoll,
Claudia Felser,
Johannes Gooth
Abstract:
In most materials, transport can be described by the motion of distinct species of quasiparticles, such as electrons and phonons. Strong interactions between quasiparticles, however, can lead to collective behaviour, including the possibility of viscous hydrodynamic flow. In the case of electrons and phonons, an electron-phonon fluid is expected to exhibit strong phonon-drag transport signatures a…
▽ More
In most materials, transport can be described by the motion of distinct species of quasiparticles, such as electrons and phonons. Strong interactions between quasiparticles, however, can lead to collective behaviour, including the possibility of viscous hydrodynamic flow. In the case of electrons and phonons, an electron-phonon fluid is expected to exhibit strong phonon-drag transport signatures and an anomalously low thermal conductivity. The Dirac semi-metal PtSn4 has a very low resistivity at low temperatures and shows a pronounced phonon drag peak in the low temperature thermopower; it is therefore an excellent candidate for hosting a hydrodynamic electron-phonon fluid. Here we report measurements of the temperature and magnetic field dependence of the longitudinal and Hall electrical resistivities, the thermopower and the thermal conductivity of PtSn4. We confirm a phonon drag peak in the thermopower near 14 K and observe a concurrent breakdown of the Lorenz ratio below the Sommerfeld value. Both of these facts are expected for an electron-phonon fluid with a quasi-conserved total momentum. A hierarchy between momentum-conserving and momentum-relaxing scattering timescales is corroborated through measurements of the magnetic field dependence of the electrical and Hall resistivity and of the thermal conductivity. These results show that PtSn4 exhibits key features of hydrodynamic transport.
△ Less
Submitted 26 February, 2018;
originally announced February 2018.
-
Robust broad spectral photodetection (UV-NIR) and ultra high responsivity investigated in nanosheets and nanowires of Bi2Te3 under harsh nano-milling conditions
Authors:
Alka Sharma,
A. K. Srivastava,
T. D. Senguttuvan,
Sudhir Husale
Abstract:
Due to miniaturization of device dimensions, the next generations photodetector based devices are expected to be fabricated from robust nanostructured materials. Hence there is an utmost requirement of investigating exotic optoelectronic properties of nanodevices fabricated from new novel materials and testing their performances at harsh conditions. The recent advances on 2D layered materials indi…
▽ More
Due to miniaturization of device dimensions, the next generations photodetector based devices are expected to be fabricated from robust nanostructured materials. Hence there is an utmost requirement of investigating exotic optoelectronic properties of nanodevices fabricated from new novel materials and testing their performances at harsh conditions. The recent advances on 2D layered materials indicate exciting progress on broad spectral photodetection (BSP) but still there is a great demand for fabricating ultra-high performance photodetectors made from single material sensing broad electromagnetic spectrum since the detection range 325 nm to 1550 nm is not covered by the conventional Si or InGaAs photodetectors. Alternatively, Bi2Te3 is a layered material, possesses exciting optoelectronic, thermoelectric, plasmonics properties. Here we report robust photoconductivity measurements on Bi2Te3 nanosheets and nanowires demonstrating BSP from UV to NIR. The nanosheets of Bi2Te3 show the best ultra-high photoresponsivity (~74 A/W at 1550 nm ). Further these nanosheets when transform into nanowires using harsh FIB milling conditions exhibit about one order enhancement in the photoresponsivity without affecting the performance of the device even after 4 months of storage at ambient conditions. An ultra-high photoresponsivity and BSP indicate exciting robust nature of topological insulator based nanodevices for optoelectronic applications.
△ Less
Submitted 21 December, 2017; v1 submitted 20 December, 2017;
originally announced December 2017.
-
X-ray photoelectron spectroscopy, Magnetotransport and Magnetization study of Nb2PdS5 superconductor
Authors:
Reena Goyal,
A. K. Srivastava,
Monu Mishra,
Govind Gupta,
Rajveer Jha,
V. P. S. Awana
Abstract:
In the present report, we investigate various properties of the Nb2PdS5 superconductor. Scanning electron microscopy displayed slabs like laminar growth of Nb2PdS5while X-ray photoelectron spectroscopy exhibited the hybridization of Sulphur (2p) with both Palladium (3d)and Niobium (3d). High field (140kOe) magneto-transport measurements revealed that superconductivity (Tc onset =7K and Tc R = 0 =…
▽ More
In the present report, we investigate various properties of the Nb2PdS5 superconductor. Scanning electron microscopy displayed slabs like laminar growth of Nb2PdS5while X-ray photoelectron spectroscopy exhibited the hybridization of Sulphur (2p) with both Palladium (3d)and Niobium (3d). High field (140kOe) magneto-transport measurements revealed that superconductivity (Tc onset =7K and Tc R = 0 = 6.2K) of the studied Nb2PdS5material is quite robust against magnetic field with the upper critical field (Hc2) outside the Pauli paramagnetic limit. Thermally activated flux flow (TAFF) of the compound showed that resistivity curves follow Arrhenius behaviour. The activation energy for Nb2PdS5 is found to decrease from 15.15meV at 10kOe to 2.35meV at 140kOe. Seemingly, the single vortex pinning is dominant in low field regions, while collective pinning is dominant in high field region. The temperature dependence of AC susceptibility confirmed the Tc at 6K, further varying amplitude and frequency showed well coupled granular nature of superconductivity. The lower critical field (Hc1) is extracted from DC magnetisation measurements at various T below Tc. It is found that Hc1(T) of Nb2PdS5 material seemingly follows the multiband nature of superconductivity.
△ Less
Submitted 8 November, 2017;
originally announced November 2017.
-
Application of Superhalogens in the Design of Organic Superconductors
Authors:
Ambrish K. Srivastava,
Abhishek Kumar,
Sugriva N. Tiwari,
Neeraj Misra
Abstract:
Bechgaard salts, (TMTSF)2X (TMTSF = tetramethyl tetraselenafulvalene and X = complex anion), form the most popular series of organic superconductors. In these salts, TMTSF molecules act as super-electron donor and X as acceptor. We computationally examine the electronic structure and properties of X in commonly used (TMTSF)2X (X = NO3, BF4, ClO4, PF6) superconductors and notice that they belong to…
▽ More
Bechgaard salts, (TMTSF)2X (TMTSF = tetramethyl tetraselenafulvalene and X = complex anion), form the most popular series of organic superconductors. In these salts, TMTSF molecules act as super-electron donor and X as acceptor. We computationally examine the electronic structure and properties of X in commonly used (TMTSF)2X (X = NO3, BF4, ClO4, PF6) superconductors and notice that they belong to the class of superhalogens due to their higher vertical detachment energy than halogen anions. This prompted us to choose other superhalogens such as X = BO2, BH4, B2F7, AuF6 and study their (TMTSF)2X complexes. Our findings suggest that these complexes behave more or less similar to those of established (TMTSF)2X superconductors, particularly for X = BO2 and B2F7. We, therefore, believe that the concept of superhalogen can be successfully applied in the design of novel organic superconductors.
△ Less
Submitted 30 July, 2017;
originally announced July 2017.
-
Observation of quantum oscillations in FIB fabricated nanowires of topological insulator (Bi2Se3)
Authors:
Biplab Bhattacharyya,
Alka Sharma,
V P S Awana,
A. K. Srivastava,
T. D. Senguttuvan,
Sudhir Husale
Abstract:
Since last few years, research based on topological insulators (TI) is in great interests due to intrinsic exotic fundamental properties and future potential applications such as quantum computers or spintronics. The fabrication of TI nanodevices and study on their transport properties mostly focused on high quality crystalline nanowires or nanoribbons. Here we report robust approach of Bi2Se3 nan…
▽ More
Since last few years, research based on topological insulators (TI) is in great interests due to intrinsic exotic fundamental properties and future potential applications such as quantum computers or spintronics. The fabrication of TI nanodevices and study on their transport properties mostly focused on high quality crystalline nanowires or nanoribbons. Here we report robust approach of Bi2Se3 nanowire formation from deposited flakes using ion beam milling method. The fabricated Bi2Se3 nanowire devices have been employed to investigate the robustness of topological surface state (TSS) to gallium ion doping and any deformation in the material due to fabrication tools. We report the quantum oscillations in magnetoresistance curves under the parallel magnetic field. The resistance versus magnetic field curves have been studied and compared with Aharonov-Bohm (AB) interference effects which further demonstrate the transport through TSS. The fabrication route and observed electronic transport properties indicate clear quantum oscillations and can be exploited further in studying the exotic electronic properties associated with TI based nanodevices.
△ Less
Submitted 26 December, 2016;
originally announced December 2016.
-
High yield synthesis and liquid exfoliation of two-dimensional belt like hafnium disulphide
Authors:
Harneet Kaur,
Sandeep Yadav,
Avanish K. Srivastava,
Nidhi Singh,
Shyama Rath,
Jorg J. Schneider,
Om P. Sinha,
Ritu Srivastava
Abstract:
Producing monolayers and few-layers in high yield with environment-stability is still a challenge in hafnium disulphide (HfS2), which is a layered two-dimensional material of group-IV transition metal dichalcogenides, to reveal its unlocked electronic and optoelectronic applications. For the first time, to the best of our knowledge, we demonstrate a simple and cost-effective method to grow layered…
▽ More
Producing monolayers and few-layers in high yield with environment-stability is still a challenge in hafnium disulphide (HfS2), which is a layered two-dimensional material of group-IV transition metal dichalcogenides, to reveal its unlocked electronic and optoelectronic applications. For the first time, to the best of our knowledge, we demonstrate a simple and cost-effective method to grow layered belt-like nano-crystals of HfS2 with surprisingly large interlayer spacing followed by its chemical exfoliation. Various microscopic and spectroscopic techniques reveal these as-grown crystals exfoliate into single or few layers in some minutes using solvent assisted ultrasonification method in N-Cyclohexyl-2-pyrrolidone. The exfoliated nanosheets of HfS2 exhibit an indirect bandgap of 1.3 eV with high stability against ambient degradation. Further, we demonstrate that these nanosheets holds potential for electronic applications by fabricating field-effect transistors based on few layered HfS2 exhibiting field-effect mobility of 0.95 cm2/V-s with a high current modulation ratio (Ion/Ioff) of 10^4 in ambient. The method is scalable and has potential significance for both academy and industry.
△ Less
Submitted 30 May, 2017; v1 submitted 3 November, 2016;
originally announced November 2016.
-
Superconductivity at 5.5 K in Nb2PdSe5 compound
Authors:
Reena Goyal,
Govind Gupta,
A. K. Srivastava,
V. P. S. Awana
Abstract:
We report superconductivity in as synthesized Nb2PdSe5, which is similar to recently discovered Nb2PdS5 compound having very high upper critical field, clearly above the Pauli paramagnetic limit [Sci. Rep. 3, 1446 (2013)]. A bulk polycrystalline Nb2PdSe5 sample is synthesized by solid state reaction route in phase pure structure. The structural characterization has been done by X ray diffraction,…
▽ More
We report superconductivity in as synthesized Nb2PdSe5, which is similar to recently discovered Nb2PdS5 compound having very high upper critical field, clearly above the Pauli paramagnetic limit [Sci. Rep. 3, 1446 (2013)]. A bulk polycrystalline Nb2PdSe5 sample is synthesized by solid state reaction route in phase pure structure. The structural characterization has been done by X ray diffraction, followed by Rietveld refinements, which revealed that Nb2PdSe5 sample is crystallized in monoclinic structure with in space group C2/m. Structural analysis revealed the formation of sharing of one dimensional PdSe2 chains. Electrical and magnetic measurements confirmed superconductivity in Nb2PdSe5 compound at 5.5K. Detailed magneto-resistance results, exhibited the value of upper critical field to be around 8.2Tesla. The estimated Hc2(0) is within Pauli Paramagnetic limit, which is unlike the Nb2PdS5.
△ Less
Submitted 23 January, 2017; v1 submitted 30 June, 2016;
originally announced June 2016.
-
Flux free growth of superconducting FeSe single crystals
Authors:
P. K. Maheshwari,
L. M. Joshi,
Bhasker Gahtori,
A. K. Srivastava,
Anurag Gupta,
S. P. Patnaik,
V. P. S. Awana
Abstract:
We report flux free growth of superconducting FeSe single crystals by an easy and versatile high temperature melt and slow cooling method for first time. The room temperature XRD on the surface of the piece of such obtained crystals showed single 101 plane of Beta-FeSe tetragonal phase. The bulk powder XRD, being obtained by crushing the part of crystal chunk showed majority tetragonal and minorit…
▽ More
We report flux free growth of superconducting FeSe single crystals by an easy and versatile high temperature melt and slow cooling method for first time. The room temperature XRD on the surface of the piece of such obtained crystals showed single 101 plane of Beta-FeSe tetragonal phase. The bulk powder XRD, being obtained by crushing the part of crystal chunk showed majority tetragonal and minority FeSe hexagonal crystalline phases. Detailed HRTEM images along with SAED (selected area electron diffraction) showed the abundance of both majority and minority FeSe phases. Both transport (RT) and magnetization (MT) exhibited superconductivity at below around 10K. Interestingly, the magnetization signal of these crystals is dominated by the magnetism of minority magnetic phase, and hence the isothermal magnetization (MH) at 4K was seen to be ferromagnetic (FM) like. Transport (R-T) measurements under magnetic field showed superconductivity onset at below 12K, and R = 0 (Tc) at 9K. Superconducting transition temperature (Tc) decreases with applied field to around 6K at 7Tesla, with dTc/dH of 0.4K/Tesla, giving rise to an Hc2 value of around 50 Tesla, 30 Tesla and 20 Tesla for Rn = 90, 50 and 10 percent respectively. FeSe single crystal activation energy is calculated from Thermally Activated Flux Flow (TAFF) model which is found to decreases with field.
△ Less
Submitted 23 January, 2017; v1 submitted 27 June, 2016;
originally announced June 2016.
-
Large Area Fabrication of Semiconducting Phosphorene by Langmuir Blodgett Assembly
Authors:
Harneet Kaur,
Sandeep Yadav,
A. K. Srivastava,
Nidhi Singh,
Jorg J. Schneider,
O. P. Sinha,
Ved Varun Agrawal,
Ritu Srivastava
Abstract:
Although a considerable number of solvent based methodologies have been developed for exfoliating black phosphorus, so far there are no reports on controlled organization of these exfoliated nanosheets on substrates. Here, for the first time to the best of our knowledge, a mixture of N-Methyl-2-pyrrolidone (NMP) and deoxygenated water is employed as a subphase in Langmuir Blodgett (LB) trough for…
▽ More
Although a considerable number of solvent based methodologies have been developed for exfoliating black phosphorus, so far there are no reports on controlled organization of these exfoliated nanosheets on substrates. Here, for the first time to the best of our knowledge, a mixture of N-Methyl-2-pyrrolidone (NMP) and deoxygenated water is employed as a subphase in Langmuir Blodgett (LB) trough for assembling the nanosheets followed by their deposition on substrates and studied its field effect transistor (FET) characteristics. Electron microscopy reveals the presence of densely aligned, crystalline, ultra-thin sheets of pristine phosphorene having lateral dimensions larger than hundred of microns. Furthermore, these assembled nanosheets retain their electronic properties and show a high current modulation of 10^4 at room temperature in FET devices. The proposed technique provides semiconducting phosphorene thin films that are amenable for large area applications.
△ Less
Submitted 19 August, 2016; v1 submitted 3 May, 2016;
originally announced May 2016.
-
Structural, electrical and magnetic properties of nanostructured Mn2Ni1.6Sn0.4 melt spun ribbons
Authors:
Nidhi Singh,
Barsha Borgohain,
A. K. Srivastava,
Ajay Dhar,
H. K. Singh
Abstract:
Nanocrystalline ribbons of inverse Heusler alloy Mn2Ni1.6Sn0.4 have been synthesised by melt spinning of the arc melted bulk precursor. The single phase ribbons crystallize into a cubic structure and exhibit very fine crystallite size of < 2 nm. Temperature dependent magnetization (M-T) measurements reveal that austenite (A)-martensite (M) phase transition begins at T~248 K and finishes at T~238 K…
▽ More
Nanocrystalline ribbons of inverse Heusler alloy Mn2Ni1.6Sn0.4 have been synthesised by melt spinning of the arc melted bulk precursor. The single phase ribbons crystallize into a cubic structure and exhibit very fine crystallite size of < 2 nm. Temperature dependent magnetization (M-T) measurements reveal that austenite (A)-martensite (M) phase transition begins at T~248 K and finishes at T~238 K during cooling cycle and these values increase to T~267 K and T~259 K while warming. In cooling cycle, the A-phase shows ferromagnetic (FM) ordering with a Curie temperature T~267 K, while both the FM-antiferromagnetic (AFM) and M-transitions occur at T~242 K. The M-phase undergoes FM transition at T~145 K. These transitions are also confirmed by temperature dependent resistivity measurements. The observed hysteretic behaviour of magnetization and resistivity in the temperature regime spanned by the A-M transition is a manifestation of the first order phase transition. Magnetization and susceptibility data also provide unambiguous evidence in favour of spin glass . The scaling of the glass freezing temperature (Tf) with frequency, extracted from the frequency dependent AC susceptibility measurements, confirms the existence of canonical spin glass at T<145 K. The occurrence of canonical spin glass has been explained in terms of the nanostructuring modified interactions between the FM correlations in the martensitic phase and the coexisting AFM.
△ Less
Submitted 2 December, 2014;
originally announced December 2014.
-
Ferromagnetism, insulator-metal transition and magnetotransport in Pr0.58Ca0.42MnO3 films: role of microstructural perturbations
Authors:
Vasudha Agarwal,
P. K. Siwach,
G. D. Varma,
V. P. S. Awana,
A. K. Srivastava,
H. K. Singh
Abstract:
Magnetic and magnetotransport properties of oriented polycrystalline Pr0.58Ca0.42MnO3 thin films prepared in flowing oxygen and air ambient has been investigated. The magnetic ground state of both the films is a frozen cluster glass. In the air annealed film charge order (CO) is quenched and ferromagnetic (FM) transition, which appears at TC=148 K is followed by antiferromagnetic (AFM) transition…
▽ More
Magnetic and magnetotransport properties of oriented polycrystalline Pr0.58Ca0.42MnO3 thin films prepared in flowing oxygen and air ambient has been investigated. The magnetic ground state of both the films is a frozen cluster glass. In the air annealed film charge order (CO) is quenched and ferromagnetic (FM) transition, which appears at TC=148 K is followed by antiferromagnetic (AFM) transition at TN=104 K. This film shows self-field hysteretic insulator-metal transition (IMT) at TIMC=89 K and TIMW=148 K in the cooling and warming cycle, respectively. Application of magnetic field (H) gradually enhances TIMC and TIMW, reduces the thermoresistive hysteresis and TIM diminishes. In contrast, the film annealed in flowing oxygen shows a CO transition, which is followed by FM and AFM transitions. This film shows appreciably smaller magnetic moment and does not show IMT upto H=20 kOe. As H is increased to H=30 kOe, IMT having strong thermoresistive hysteresis and sharp resistivity jumps appears in the cooling and warming cycles. As H increases to higher values the thermoresistive hysteresis is reduced, resistivity jumps are observed to disappear and TIM decreases. In the lower temperature regime the resistivity first decreases slowly with H and then shows sharp drop. The virgin cycle is not recoverable in subsequent cycles. The decrement far more pronounced in the oxygen annealed film and occurs at much higher H suggesting that the frozen cluster glass state is more robust in this film. The microstructural analysis of the two set of films shows CO quenching, FM transition and self-field IMT in air annealed film is caused by higher density of microstructural disorder and lattice defects. The difference in growth ambience of the two films could give rise to such microstructural perturbations.
△ Less
Submitted 13 August, 2014;
originally announced August 2014.
-
Localized surface plasmon resonance (LSPR) and refractive index sensitivity of vacuum evaporated nanostructured gold thin films
Authors:
V. N. Rai,
A. K. Srivastava,
C. Mukherjee,
S. K. Deb
Abstract:
The plasmonic properties of vacuum evaporated nanostructured gold thin films having different types of nanoparticles are presented. The films with more than 6 nm thickness show presence of nanorods having non cylindrical shape with triangular base. Two characteristics plasmon bands have been recoreded in absorption spectra. First one occurs below 500 nm and other one at higher wavelength side. Bot…
▽ More
The plasmonic properties of vacuum evaporated nanostructured gold thin films having different types of nanoparticles are presented. The films with more than 6 nm thickness show presence of nanorods having non cylindrical shape with triangular base. Two characteristics plasmon bands have been recoreded in absorption spectra. First one occurs below 500 nm and other one at higher wavelength side. Both the peaks show dependence on the dielectric property of surroundings. The higher wavelength localized surface plasmon resonance (LSPR) peak shifts to higher wavelength with an increase in the nanoparticle size, surface roughness and refractive index of the surrounding (Methylene Blue dye coating). This shows that such thin films can be used as sensor for organic molecules with a refractive index sensitivity ranging from 250 - 305 nm/RIU (Refractive Index Unit).
△ Less
Submitted 18 June, 2014;
originally announced June 2014.
-
One step growth of PVP spheres embedded with nearly monodispersive CdS nanocrystals using chemical bath deposition
Authors:
Alka A Ingale,
Rahul Aggarwal,
Ekta Rani,
Komal Bapna,
Pragya Tiwari,
Arvind K Srivastava
Abstract:
We have used simple chemical bath deposition technique to grow nearly monodispersive CdS nanocrystals in PVP matrix. Systematic study of variation of growth parameters has revealed that optimized growth of CdS nanocrystals in PVP matrix depends on relative concentration of Cd acetate/Thiourea to polyvinyl pyrrolidone in the bath. It is also observed that higher concentration (1M) of Cd acetate/Thi…
▽ More
We have used simple chemical bath deposition technique to grow nearly monodispersive CdS nanocrystals in PVP matrix. Systematic study of variation of growth parameters has revealed that optimized growth of CdS nanocrystals in PVP matrix depends on relative concentration of Cd acetate/Thiourea to polyvinyl pyrrolidone in the bath. It is also observed that higher concentration (1M) of Cd acetate/Thiourea gives rise to smaller NCs compared to lower concentration (0.5M), however density of particles is large in thin film grown using 1M concentration. Scanning electron microscopic studies show that it is a nanoparticulate film of spheres of size around 100-200nm. Further, absorption, energy dispersive spectroscopy and transmission electron microscopic investigations reveal that nearly monodispersive CdS nanocrystals are embedded in 100-200 nm PVP spheres for the range 0.5 M, 1M Cd acetate/Thiourea concentration (figure 1). The effect of varying PVP, Cd acetate/Thiourea concentration, sequence and addition of ingredients and heating/cooling cycles have been studied and results are corroborated with existing theory.
△ Less
Submitted 17 June, 2014;
originally announced June 2014.
-
Enhanced Kerr effect in vertically aligned deformed helix ferroelectric liquid crystals
Authors:
E. P. Pozhidaev,
A. K. Srivastava,
Alexei D. Kiselev,
V. G. Chigrinov,
V. V. Vashchenko,
A. I. Krivoshey,
M. V. Minchenko,
H. -S. Kwok
Abstract:
We disclose the vertically aligned deformed helix ferroelectric liquid crystal (VADHFLC) whose Kerr constant ($K_{\mathrm{kerr}}\approx 130$~nm/V$^2$ at $λ=543$~nm) is one order of magnitude higher than any other value previously reported for liquid crystalline structures. Under certain conditions, the phase modulation with ellipticity less than 0.05 over the range of continuous and hysteresis fre…
▽ More
We disclose the vertically aligned deformed helix ferroelectric liquid crystal (VADHFLC) whose Kerr constant ($K_{\mathrm{kerr}}\approx 130$~nm/V$^2$ at $λ=543$~nm) is one order of magnitude higher than any other value previously reported for liquid crystalline structures. Under certain conditions, the phase modulation with ellipticity less than 0.05 over the range of continuous and hysteresis free electric adjustment of the phase shift from zero to 2$π$ have been obtained at sub-kilohertz frequency.
△ Less
Submitted 11 January, 2014;
originally announced January 2014.
-
Enhancing Light Harvesting by Hierarchical Functionally Graded Transparent Conducting Al-doped ZnO Nano- and Mesoarchitectures
Authors:
Paolo Gondoni,
Piero Mazzolini,
Valeria Russo,
Annamaria Petrozza,
Avanish K. Srivastava,
Andrea Li Bassi,
Carlo S. Casari
Abstract:
A functionally graded Al-doped ZnO structure is presented which combines conductivity, visible transparency and light scattering with mechanical flexibility. The nano and meso-architecture, constituted by a hierarchical, large surface area, mesoporous tree-like structure evolving in a compact layer, is synthesized at room temperature and is fully compatible with plastic substrates. Light trapping…
▽ More
A functionally graded Al-doped ZnO structure is presented which combines conductivity, visible transparency and light scattering with mechanical flexibility. The nano and meso-architecture, constituted by a hierarchical, large surface area, mesoporous tree-like structure evolving in a compact layer, is synthesized at room temperature and is fully compatible with plastic substrates. Light trapping capability is demonstrated by showing up to 100% improvement of light absorption of a low bandgap polymer employed as the active layer.
△ Less
Submitted 27 November, 2013;
originally announced November 2013.
-
Effect of Thermal Annealing on Boron Diffusion, Micro-structural, Electrical and Magnetic properties of Laser Ablated CoFeB Thin Films
Authors:
G. Venkat Swamy,
Himanshu Pandey,
A. K. Srivastava,
M. K. Dalai,
K. K. Maurya,
Rashmi,
R. K. Rakshit
Abstract:
We report on Boron diffusion and subsequent crystallization of Co$_{40}$Fe$_{40}$B$_{20}$ (CoFeB) thin films on SiO$_2$/Si(001) substrate using pulsed laser deposition. Secondary ion mass spectroscopy reveals Boron diffusion at the interface in both amorphous and crystalline phase of CoFeB. High-resolution transmission electron microscopy reveals a small fraction of nano-crystallites embedded in t…
▽ More
We report on Boron diffusion and subsequent crystallization of Co$_{40}$Fe$_{40}$B$_{20}$ (CoFeB) thin films on SiO$_2$/Si(001) substrate using pulsed laser deposition. Secondary ion mass spectroscopy reveals Boron diffusion at the interface in both amorphous and crystalline phase of CoFeB. High-resolution transmission electron microscopy reveals a small fraction of nano-crystallites embedded in the amorphous matrix of CoFeB. However, annealing at 400$^\circ$C results in crystallization of CoFe with \textit{bcc} structure along (110) orientation. As-deposited films are non-metallic in nature with the coercivity (H$_c$) of 5Oe while the films annealed at 400$^\circ$C are metallic with a H$_c$ of 135Oe.
△ Less
Submitted 31 May, 2013;
originally announced May 2013.
-
Orientational "Kerr effect" and phase modulation of light in deformed-helix ferroelectric liquid crystals with subwavelength pitch
Authors:
Eugene P. Pozhidaev,
Alexei D. Kiselev,
Abhishek Kumar Srivastava,
Vladimir G. Chigrinov,
Hoi-Sing Kwok,
Maxim V. Minchenko
Abstract:
We study both theoretically and experimentally the electro-optical properties of vertically aligned deformed helix ferroelectric liquid crystals (VADHFLC) with subwavelength pitch that are governed by the electrically induced optical biaxiality of the smectic helical structure. The key theoretical result is that the principal refractive indices of homogenized VADHFLC cells exhibit the quadratic no…
▽ More
We study both theoretically and experimentally the electro-optical properties of vertically aligned deformed helix ferroelectric liquid crystals (VADHFLC) with subwavelength pitch that are governed by the electrically induced optical biaxiality of the smectic helical structure. The key theoretical result is that the principal refractive indices of homogenized VADHFLC cells exhibit the quadratic nonlinearity and such behavior might be interpreted as the orientational "Kerr effect" caused by the electric-field-induced orientational distortions of the FLC helix. In our experiments, it has been observed that, for sufficiently weak electric fields, the magnitude of biaxiality is proportional to the square of electric field in good agreement with our theoretical results for the effective dielectric tensor of VADHFLCs. Under certain conditions, the 2$π$ phase modulation of light, which is caused by one of the induced refractive indices, is observed without changes in ellipticity of incident light.
△ Less
Submitted 12 April, 2013;
originally announced April 2013.
-
Effect of synthesis temperature on superconducting properties of n-SiC added bulk MgB2 superconductor
Authors:
Arpita Vajpayee,
R. Jha,
A. K. Srivastava,
H. Kishan,
M. Tropeano,
C. Ferdeghini,
V. P. S. Awana
Abstract:
We study the effect of synthesis temperature on the phase formation in nano(n)-SiC added bulk MgB2 superconductor. In particular we study: lattice parameters, amount of carbon (C) substitution, microstructure, critical temperature (Tc), irreversibility field (Hirr), critical current density (Jc), upper critical field (Hc2) and flux pinning. Samples of MgB2+(n-SiC)x with x=0.0, 0.05 & 0.10 were pre…
▽ More
We study the effect of synthesis temperature on the phase formation in nano(n)-SiC added bulk MgB2 superconductor. In particular we study: lattice parameters, amount of carbon (C) substitution, microstructure, critical temperature (Tc), irreversibility field (Hirr), critical current density (Jc), upper critical field (Hc2) and flux pinning. Samples of MgB2+(n-SiC)x with x=0.0, 0.05 & 0.10 were prepared at four different synthesis temperatures i.e. 850, 800, 750, and 700oC with the same heating rate as 10oC/min. We found 750oC as the optimal synthesis temperature for n-SiC doping in bulk MgB2 in order to get the best superconducting performance in terms of Jc, Hc2 and Hirr. Carbon (C) substitution enhances the Hc2 while the low temperature synthesis is responsible for the improvement in Jc due to the smaller grain size, defects and nano-inclusion induced by C incorporation into MgB2 matrix, which is corroborated by elaborative HRTEM (high-resolution transmission electron microscopy) results. We optimized the the Tc(R=0) of above 15K for the studied n-SiC doped and 750 0C synthesized MgB2 under 140 KOe field, which is one of the highest values yet obtained for variously processed and nano-particle added MgB2 in literature to our knowledge.
△ Less
Submitted 20 January, 2012; v1 submitted 26 January, 2011;
originally announced January 2011.
-
In Search Of Graphane -- A two-dimensional hydrocarbon
Authors:
Nihar Ranjan Ray,
A. K. Srivastava,
Rainer Grotzschel
Abstract:
The characteristic results by different diagnostics on a typical hydrogenated diamond like carbon (HDLC) film synthesized directly in a capacitatively coupled RF (13.56 MHz) discharge are described. The results show some typical charecteric features of Graphane as predicted theoretically. First experimental observation of GRAPHANE/GRAPHANE like structure embedded in the HDLC film is described.
The characteristic results by different diagnostics on a typical hydrogenated diamond like carbon (HDLC) film synthesized directly in a capacitatively coupled RF (13.56 MHz) discharge are described. The results show some typical charecteric features of Graphane as predicted theoretically. First experimental observation of GRAPHANE/GRAPHANE like structure embedded in the HDLC film is described.
△ Less
Submitted 27 February, 2008;
originally announced February 2008.
