Showing 1–50 of 65 results for author: Schwarz, S

Evolution of charge correlations in the hole-doped kagome superconductor CsV$_{3-x}$Ti$_x$Sb$_5$

Authors: Ganesh Pokharel, Canxun Zhang, Evgeny Redekop, Brenden R. Ortiz, Andrea N. Capa Salinas, Sarah Schwarz, Steven J. Gomez Alvarado, Suchismita Sarker, Andrea F. Young, Stephen D. Wilson

Abstract: The interplay between superconductivity and charge correlations in the kagome metal CsV$_3$Sb$_5$ can be tuned by external perturbations such as doping or pressure. Here we present a study of charge correlations and superconductivity upon hole doping via Ti substitution on the V kagome sites in CsV$_{3-x}$Ti$_x$Sb$_5$ via synchrotron x-ray diffraction and scanning SQUID measurements. While the sup… ▽ More The interplay between superconductivity and charge correlations in the kagome metal CsV$_3$Sb$_5$ can be tuned by external perturbations such as doping or pressure. Here we present a study of charge correlations and superconductivity upon hole doping via Ti substitution on the V kagome sites in CsV$_{3-x}$Ti$_x$Sb$_5$ via synchrotron x-ray diffraction and scanning SQUID measurements. While the superconducting phase, as viewed via the vortex structure, remains conventional and unchanged across the phase diagram, the nature of charge correlations evolves as a function of hole-doping from the first superconducting dome into the second superconducting dome. For Ti doping in the first superconducting dome, competing $2\times 2 \times 2$ and $2\times 2 \times 4$ supercells form within the charge density wave state and are suppressed rapidly with carrier substitution. In the second superconducting dome, no charge correlations are detected. Comparing these results to those observed for CsV$_3$Sb$_{5-x}$Sn$_x$ suggests important differences between hole doping via chemical substitution on the V and Sb sites, particularly in the disorder potential associated with each dopant. △ Less

Submitted 16 June, 2025; originally announced June 2025.

Comments: 7 pages, 5 figures

Active gel theory for cell migration with two myosin isoforms

Authors: Nils O. Winkler, Oliver M. Drozdowski, Falko Ziebert, Ulrich S. Schwarz

Abstract: Myosin II molecular motors slide actin filaments relatively to each other and are essential for force generation, motility and mechanosensing in animal cells. For non-muscle cells, evolution has resulted in three different isoforms, which have different properties concerning the motor cycle and also occur in different abundances in the cells, but their respective biological and physical roles are… ▽ More Myosin II molecular motors slide actin filaments relatively to each other and are essential for force generation, motility and mechanosensing in animal cells. For non-muscle cells, evolution has resulted in three different isoforms, which have different properties concerning the motor cycle and also occur in different abundances in the cells, but their respective biological and physical roles are not fully understood. Here we use active gel theory to demonstrate the complementary roles of isoforms A and B for cell migration. We first show that our model can be derived both from coarse-graining kinetic equations and from nonequilibrium thermodynamics as the macroscopic limit of a two-component Tonks gas. We then parametrize the model and show that motile solutions exist, in which the more abundant and more dynamic isoform A is localized to the front and the stronger isoform B to the rear, in agreement with experiments. Exploring parameter space beyond the isoform parameters typical for animal cells, we also find cell oscillations in length and velocity, which might be realized for genetically engineered systems. We also describe an analytical solution for the stiff limit, which then is used to calculate a state diagram, and the effect of actin polymerization at the boundaries, that leads to an imperfect pitchfork bifurcation. Our findings highlight the importance of including isoform-specific molecular details to describe whole cell behavior. △ Less

Submitted 10 July, 2025; v1 submitted 17 February, 2025; originally announced February 2025.

Comments: Revtex, 14 pages, 9 figures, 63 references

Three-dimensional chiral active Ornstein-Uhlenbeck model for helical motion of microorganisms

Authors: Leon Lettermann, Falko Ziebert, Mirko Singer, Friedrich Frischknecht, Ulrich S. Schwarz

Abstract: Active movement is essential for the survival of microorganisms like bacteria, algae and unicellular parasites. In three dimensions, both swimming and gliding microorganisms often exhibit helical trajectories. One such case are malaria parasites gliding through 3D hydrogels, for which we find that their internal correlation time is similar to the time taken for one helical turn. Motivated by this… ▽ More Active movement is essential for the survival of microorganisms like bacteria, algae and unicellular parasites. In three dimensions, both swimming and gliding microorganisms often exhibit helical trajectories. One such case are malaria parasites gliding through 3D hydrogels, for which we find that their internal correlation time is similar to the time taken for one helical turn. Motivated by this experimental finding, here we theoretically analyze the case of finite internal correlation time for microorganisms with helical trajectories as chiral active particles with an Ornstein-Uhlenbeck process for torque. We present an analytical solution which is in very good agreement with computer simulations. We then show that for this type of internal noise, chirality and rotation increase the persistence of motion and results in helical trajectories that have a larger long-time mean squared displacement than straight trajectories at the same propulsion speed. Finally we provide experimental evidence for this prediction for the case of the malaria parasites. △ Less

Submitted 30 June, 2025; v1 submitted 31 January, 2025; originally announced January 2025.

Comments: Revtex, 8 pages, 6 figures, supplemental, movies not included

Cell bulging and extrusion in a three-dimensional bubbly vertex model for curved epithelial sheets

Authors: Oliver M. Drozdowski, Ulrich S. Schwarz

Abstract: Cell extrusion is an essential mechanism for controlling cell density in epithelial tissues. Another essential element of epithelia is curvature, which is required to achieve complex shapes, like in the lung or intestine. Here we introduce a three-dimensional bubbly vertex model to study the interplay between extrusion and curvature. We find a generic cellular bulging instability at topological de… ▽ More Cell extrusion is an essential mechanism for controlling cell density in epithelial tissues. Another essential element of epithelia is curvature, which is required to achieve complex shapes, like in the lung or intestine. Here we introduce a three-dimensional bubbly vertex model to study the interplay between extrusion and curvature. We find a generic cellular bulging instability at topological defects which is much stronger than for standard vertex models. To clarify the underlying mechanism, we analytically calculate the energy landscape for a single bulging cell in a mean field tissue. We find that extrusion is energetically preferred at topological defects due to a redistribution of Gaussian curvature into the defect. We show that it can be driven both by a decrease in apico-basal tension or by contractile line tensions. We also show that extrusion can be suppressed by luminal pressure and interfacial bending rigidity, allowing for additional control of this important process. Our theory suggests that epithelial curvature naturally leads to cell bulging and extrusion because the interfacial curvature of individual cells at the defects strongly amplifies buckling effected by tissue-scale topological defects in elastic sheets. △ Less

Submitted 11 November, 2024; originally announced November 2024.

Comments: 15 pages, 10 figures

The positioning of stress fibers in contractile cells minimizes internal mechanical stress

Authors: Lukas Riedel, Valentin Wössner, Dominic Kempf, Falko Ziebert, Peter Bastian, Ulrich S. Schwarz

Abstract: The mechanics of animal cells is strongly determined by stress fibers, which are contractile filament bundles that form dynamically in response to extracellular cues. Stress fibers allow the cell to adapt its mechanics to environmental conditions and to protect it from structural damage. While the physical description of single stress fibers is well-developed, much less is known about their spatia… ▽ More The mechanics of animal cells is strongly determined by stress fibers, which are contractile filament bundles that form dynamically in response to extracellular cues. Stress fibers allow the cell to adapt its mechanics to environmental conditions and to protect it from structural damage. While the physical description of single stress fibers is well-developed, much less is known about their spatial distribution on the level of whole cells. Here, we combine a finite element method for one-dimensional fibers embedded in an elastic bulk medium with dynamical rules for stress fiber formation based on genetic algorithms. We postulate that their main goal is to achieve minimal mechanical stress in the bulk material with as few fibers as possible. The fiber positions and configurations resulting from this optimization task alone are in good agreement with those found in experiments where cells in 3D-scaffolds were mechanically strained at one attachment point. For optimized configurations, we find that stress fibers typically run through the cell in a diagonal fashion, similar to reinforcement strategies used for composite material. △ Less

Submitted 14 October, 2024; v1 submitted 10 July, 2024; originally announced July 2024.

Comments: 37 pages, 11 figures, 72 references

Active gel model for one-dimensional cell migration coupling actin flow and adhesion dynamics

Authors: Valentin Wössner, Oliver M. Drozdowski, Falko Ziebert, Ulrich S. Schwarz

Abstract: Migration of animal cells is based on the interplay between actin polymerization at the front, adhesion along the cell-substrate interface, and actomyosin contractility at the back. Active gel theory has been used before to demonstrate that actomyosin contractility is sufficient for polarization and self-sustained cell migration in the absence of external cues, but did not consider the dynamics of… ▽ More Migration of animal cells is based on the interplay between actin polymerization at the front, adhesion along the cell-substrate interface, and actomyosin contractility at the back. Active gel theory has been used before to demonstrate that actomyosin contractility is sufficient for polarization and self-sustained cell migration in the absence of external cues, but did not consider the dynamics of adhesion. Likewise, migration models based on the mechanosensitive dynamics of adhesion receptors usually do not include the global dynamics of intracellular flow. Here we show that both aspects can be combined in a minimal active gel model for one-dimensional cell migration with dynamic adhesion. This model demonstrates that load sharing between the adhesion receptors leads to symmetry breaking, with stronger adhesion at the front, and that bistability of migration arises for intermediate adhesiveness. Local variations in adhesiveness are sufficient to switch between sessile and motile states, in qualitative agreement with experiments. △ Less

Submitted 9 July, 2024; v1 submitted 27 May, 2024; originally announced May 2024.

Comments: Revtex, 33 pages, 7 figures, minor revisions to original version

Journal ref: Valentin Woessner et al 2024 New J. Phys. 26 073039

Coat stiffening can explain invagination of clathrin-coated membranes

Authors: Felix Frey, Ulrich S. Schwarz

Abstract: Clathrin-mediated endocytosis is the main pathway used by eukaryotic cells to take up extracellular material, but the dominant physical mechanisms driving this process are still elusive. Recently several high-resolution imaging techniques have been used on different cell lines to measure the geometrical properties of clathrin-coated pits over their whole lifetime. Here we first show that the combi… ▽ More Clathrin-mediated endocytosis is the main pathway used by eukaryotic cells to take up extracellular material, but the dominant physical mechanisms driving this process are still elusive. Recently several high-resolution imaging techniques have been used on different cell lines to measure the geometrical properties of clathrin-coated pits over their whole lifetime. Here we first show that the combination of all datasets with the recently introduced cooperative curvature model defines a consensus pathway, which is characterized by a flat to-curved transition at finite area, followed by linear growth and subsequent saturation of curvature. We then apply an energetic model for the composite of plasma membrane and clathrin coat to this consensus pathway to show that the dominant mechanism for invagination could be coat stiffening, which might originate from cooperative interactions between the different clathrin molecules and progressively drives the system towards its intrinsic curvature. Our theory predicts that two length scales determine the invagination pathway, namely the patch size at which the flat-to-curved transition occurs and the final pit radius. △ Less

Submitted 19 September, 2024; v1 submitted 5 May, 2024; originally announced May 2024.

Comments: revtex, 13 pages, 5 figures in PDF-format

The generic temperature response of large biochemical networks

Authors: Julian B. Voits, Ulrich S. Schwarz

Abstract: Biological systems are remarkably susceptible to relatively small temperature changes. The most obvious example is fever, when a modest rise in body temperature of only few Kelvin has strong effects on our immune system and how it fights pathogens. Another very important example is climate change, when even smaller temperature changes lead to dramatic shifts in ecosystems. Although it is generally… ▽ More Biological systems are remarkably susceptible to relatively small temperature changes. The most obvious example is fever, when a modest rise in body temperature of only few Kelvin has strong effects on our immune system and how it fights pathogens. Another very important example is climate change, when even smaller temperature changes lead to dramatic shifts in ecosystems. Although it is generally accepted that the main effect of an increase in temperature is the acceleration of biochemical reactions according to the Arrhenius equation, it is not clear how it effects large biochemical networks with complicated architectures. For developmental systems like fly and frog, it has been shown that the system response to temperature deviates in a characteristic manner from the linear Arrhenius plot of single reactions, but a rigorous explanation has not been given yet. Here we use a graph theoretical interpretation of the mean first passage times of a biochemical master equation to give a statistical description. We find that in the limit of large system size and if the network has a bias towards a target state, then the Arrhenius plot is generically quadratic, in excellent agreement with experimental data for developmental times in fly and frog. △ Less

Submitted 25 March, 2024; originally announced March 2024.

Comments: 14 pages, 7 figures

Morphological instability at topological defects in a three-dimensional vertex model for spherical epithelia

Authors: Oliver M. Drozdowski, Ulrich S. Schwarz

Abstract: Epithelial monolayers are a central building block of complex organisms. Topological defects have emerged as important elements for single cell behavior in flat epithelia. Here we theoretically study such defects in a three-dimensional vertex model for spherical epithelia like cysts or intestinal organoids. We find that they lead to the same generic morphological instability to an icosahedral shap… ▽ More Epithelial monolayers are a central building block of complex organisms. Topological defects have emerged as important elements for single cell behavior in flat epithelia. Here we theoretically study such defects in a three-dimensional vertex model for spherical epithelia like cysts or intestinal organoids. We find that they lead to the same generic morphological instability to an icosahedral shape as it is known from spherical elastic shells like virus capsids, polymerized vesicles or buckyballs. We derive analytical expressions for the effective stretching and bending moduli as a function of the parameters of the vertex model, in excellent agreement with computer simulations. These equations accurately predict both the buckling of a flat epithelial monolayer under uniaxial compression and the faceting transition around the topological defects in spherical epithelia. We further show that localized apico-basal tension asymmetries allow them to reduce the transition threshold to small system sizes. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: 5 pages, 5 figures, supplemental material

The role of the nucleus for cell mechanics: an elastic phase field approach

Authors: Robert Chojowski, Ulrich S. Schwarz, Falko Ziebert

Abstract: The nucleus of eukaryotic cells typically makes up around 30% of the cell volume and has significantly different mechanics, which can make it effectively up to ten times stiffer than the surrounding cytoplasm. Therefore it is an important element for cell mechanics, but a quantitative understanding of its mechanical role during whole cell dynamics is largely missing. Here we demonstrate that elast… ▽ More The nucleus of eukaryotic cells typically makes up around 30% of the cell volume and has significantly different mechanics, which can make it effectively up to ten times stiffer than the surrounding cytoplasm. Therefore it is an important element for cell mechanics, but a quantitative understanding of its mechanical role during whole cell dynamics is largely missing. Here we demonstrate that elastic phase fields can be used to describe dynamical cell processes in adhesive or confining environments in which the nucleus acts as a stiff inclusion. We first introduce and verify our computational method and then study several applications of large relevance. For cells on adhesive patterns, we find that nuclear stress is shielded by the adhesive pattern. For cell compression between two parallel plates, we obtain force-compression curves that allow us to extract an effective modulus for the cell-nucleus composite. For micropipette aspiration, the effect of the nucleus on the effective modulus is found to be much weaker, highlighting the complicated interplay between extracellular geometry and cell mechanics that is captured by our approach. We also show that our phase field approach can be used to investigate the effects of viscoelasticity and cortical tension. △ Less

Submitted 26 March, 2024; v1 submitted 22 September, 2023; originally announced September 2023.

Comments: 15 pages, 8 figures

Light-controllable hybrid aligning layer based on LIPSS on sapphire surface and PVCN-F film

Authors: I. Gvozdovskyy, D. Bratova, Z. Kazantseva, S. Malyuta, P. Lytvyn, S. Schwarz, R. Hellmann

Abstract: The creation of aligning layers for the uniform orientation of liquid crystals is significant for both research and the application of liquid crystals. For all applications, the creation of aligning layers possessing controllable characteristics such as azimuthal and polar anchoring energies, easy-axis of director alignment and pre-tilt angle, in the same way as it is achieved by using photoaligni… ▽ More The creation of aligning layers for the uniform orientation of liquid crystals is significant for both research and the application of liquid crystals. For all applications, the creation of aligning layers possessing controllable characteristics such as azimuthal and polar anchoring energies, easy-axis of director alignment and pre-tilt angle, in the same way as it is achieved by using photoaligning layers processed by light, is very important. Here, aligning properties of hybrid aligning layers created on the basis of sapphire surfaces additionally coated by photoaligning layer of PVCN-F are studied. These hybrid layers possess the properties of the nano-structured sapphire layer and the photosensitive PVCN-F layer, and complement each other. The irradiation time dependence of the azimuthal anchoring energy of the hybrid layers is studied. By using certain experimental conditions during irradiation of hybrid layers, e.g., polarisation of light and irradiation time, a minimum value of the azimuthal anchoring energy, close to zero, was obtained. Atomic force microscope studies of the irradiated hybrid layers were also carried out. It was found that the behavior of the contact angle of nematic droplets placed on treated sapphire surfaces are in good agreement with properties of hybrid aligning layers and parameters of structuring surface obtained from AFM images. △ Less

Submitted 12 July, 2023; v1 submitted 3 March, 2023; originally announced March 2023.

Comments: 31 pages, 16 figures, 2 tables

Optogenetic switching of migration of contractile cells

Authors: Oliver M. Drozdowski, Falko Ziebert, Ulrich S. Schwarz

Abstract: Cell crawling on flat substrates is based on intracellular flows of the actin cytoskeleton that are driven by both actin polymerization at the front and myosin contractility at the back. The new experimental tool of optogenetics makes it possible to spatially control contraction and thereby possibly also cell migration. Here we analyze this situation theoretically using a one-dimensional active ge… ▽ More Cell crawling on flat substrates is based on intracellular flows of the actin cytoskeleton that are driven by both actin polymerization at the front and myosin contractility at the back. The new experimental tool of optogenetics makes it possible to spatially control contraction and thereby possibly also cell migration. Here we analyze this situation theoretically using a one-dimensional active gel model in which the excluded volume interactions of myosin and their aggregation into minifilaments is modeled by a supercritical van der Waals fluid. This physically simple and transparent, but nonlinear and thermodynamically rigorous model predicts bistability between sessile and motile solutions. We then show that one can switch between these two states at realistic parameter ranges via optogenetic activation or inhibition of contractility, in agreement with recent experiments. We also predict the required activation strengths and initiation times. △ Less

Submitted 13 June, 2022; originally announced June 2022.

Comments: 12 pages including supplement, 5 main and 4 supplemental figures

Journal ref: Communications Physics 6:158 (2023)

First-passage times in complex energy landscapes: a case study with nonmuscle myosin II assembly

Authors: Rick Bebon, Ulrich S. Schwarz

Abstract: Complex energy landscapes often arise in biological systems, e.g. for protein folding, biochemical reactions or intracellular transport processes. Their physical effects are often reflected in the first-passage times arising from these energy landscapes. However, their calculation is notoriously challenging and it is often difficult to identify the most relevant features of a given energy landscap… ▽ More Complex energy landscapes often arise in biological systems, e.g. for protein folding, biochemical reactions or intracellular transport processes. Their physical effects are often reflected in the first-passage times arising from these energy landscapes. However, their calculation is notoriously challenging and it is often difficult to identify the most relevant features of a given energy landscape. Here we show how this can be achieved by coarse-graining the Fokker-Planck equation to a master equation and decomposing its first-passage times in an iterative process. We apply this method to the electrostatic interaction between two rods of nonmuscle myosin II (NM2), which is the main molecular motor for force generation in nonmuscle cells. Energy landscapes are computed directly from the amino acid sequences of the three different isoforms. Our approach allows us to identify the most relevant energy barriers for their self-assembly into nonmuscle myosin II minifilaments and how they change under force. In particular, we find that antiparallel configurations are more stable than parallel ones, but also show more changes under mechanical loading. Our work demonstrates the rich dynamics that can be expected for NM2-assemblies under mechanical load and in general shows how one can identify the most relevant energy barriers in complex energy landscapes. △ Less

Submitted 3 June, 2022; v1 submitted 7 April, 2022; originally announced April 2022.

Comments: Revtex, 34 pages, 8 figures, minor revisions compared to original version

Optogenetic control of intracellular flows and cell migration: a comprehensive mathematical analysis with a minimal active gel model

Authors: Oliver M. Drozdowski, Falko Ziebert, Ulrich S. Schwarz

Abstract: The actin cytoskeleton of cells is in continuous motion due to both polymerization of new filaments and their contraction by myosin II molecular motors. Through adhesion to the substrate, such intracellular flow can be converted into cell migration. Recently, optogenetics has emerged as a new powerful experimental method to control both actin polymerization and myosin II contraction. While optogen… ▽ More The actin cytoskeleton of cells is in continuous motion due to both polymerization of new filaments and their contraction by myosin II molecular motors. Through adhesion to the substrate, such intracellular flow can be converted into cell migration. Recently, optogenetics has emerged as a new powerful experimental method to control both actin polymerization and myosin II contraction. While optogenetic control of polymerization can initiate cell migration by generating protrusion, it is less clear if and how optogenetic control of contraction can also affect cell migration. Here we analyze the latter situation using a minimal variant of active gel theory into which we include optogenetic activation as a spatiotemporally constrained perturbation. The model can describe the symmetrical flow of the actomyosin system observed in optogenetic experiments, but not the long-lasting polarization required for cell migration. Motile solutions become possible if cytoskeletal polymerization is included through the boundary conditions. Optogenetic activation of contraction can then initiate locomotion in a symmetrically spreading cell and strengthen motility in an asymmetrically polymerizing one. If designed appropriately, it can also arrest motility even for protrusive boundaries. △ Less

Submitted 6 July, 2021; v1 submitted 29 April, 2021; originally announced April 2021.

Comments: 16 pages, 11 figures. Revisions compared to first version mainly concern Eqs. 1, 3, 6, 8, 14 and Fig. 3 (effect of objective derivative)

Journal ref: Phys. Rev. E 104, 024406 (2021)

Rheology of mixed motor ensembles

Authors: Justin Grewe, Ulrich S. Schwarz

Abstract: The rheology of biological cells is not only determined by their cytoskeletal networks, but also by the molecular motors that crosslink and contract them. Recently it has been found that the assemblies of myosin II molecular motors in non-muscle cells are mixtures of fast and slow motor variants. Using computer simulations and an analytical mean field theory of a crossbridge model for myosin II mo… ▽ More The rheology of biological cells is not only determined by their cytoskeletal networks, but also by the molecular motors that crosslink and contract them. Recently it has been found that the assemblies of myosin II molecular motors in non-muscle cells are mixtures of fast and slow motor variants. Using computer simulations and an analytical mean field theory of a crossbridge model for myosin II motors, here we show that such motor ensembles effectively behave as active Maxwell elements. We calculate storage and loss moduli as a function of the model parameters and show that the rheological properties cross over from viscous to elastic as one increases the ratio of slow to fast motors. This suggests that cells tune their mechanical properties by regulating the composition of their myosin assemblies. △ Less

Submitted 10 July, 2020; originally announced July 2020.

Comments: 5 pages, 5 figures

Mechanosensitive Self-Assembly of Myosin II Minifilaments

Authors: Justin Grewe, Ulrich S. Schwarz

Abstract: Self-assembly and force generation are two central processes in biological systems that usually are considered in separation. However, the signals that activate non-muscle myosin II molecular motors simultaneously lead to self-assembly into myosin II minifilaments as well as progression of the motor heads through the crossbridge cycle. Here we investigate theoretically the possible effects of coup… ▽ More Self-assembly and force generation are two central processes in biological systems that usually are considered in separation. However, the signals that activate non-muscle myosin II molecular motors simultaneously lead to self-assembly into myosin II minifilaments as well as progression of the motor heads through the crossbridge cycle. Here we investigate theoretically the possible effects of coupling these two processes. Our assembly model, which builds upon a consensus architecture of the minifilament, predicts a critical aggregation concentration at which the assembly kinetics slows down dramatically. The combined model predicts that increasing actin filament concentration and force both lead to a decrease in the critical aggregation concentration. We suggest that due to these effects, myosin II minifilaments in a filamentous context might be in a critical state that reacts faster to varying conditions than in solution. We finally compare our model to experiments by simulating fluorescence recovery after photobleaching. △ Less

Submitted 18 October, 2019; originally announced October 2019.

Comments: 15 pages, 6 figures, 4 supplemental figures

Journal ref: Phys. Rev. E 101, 022402 (2020)

Nanostructured clathrates and clathrate-based nanocomposites

Authors: R. Christian, M. Ikeda, G. Lientschnig, L. Prochaska, A. Prokofiev, P. Tomeš, X. Yan, A. Zolriasatein, J. Bernardi, T. Schachinger, S. Schwarz, A. Steiger-Thirsfeld, P. Rogl, S. Populoh, A. Weidenkaff, S. Paschen

Abstract: Intermetallic clathrates are candidate materials for thermoelectric applications above room temperature. Here we explore whether their intrinsically low lattice thermal conductivities can be further reduced by nanostructuring and whether this can further enhance their thermoelectric performance.}{As bulk nanostructuring routes we studied melt spinning and ball milling. To optimize the compaction p… ▽ More Intermetallic clathrates are candidate materials for thermoelectric applications above room temperature. Here we explore whether their intrinsically low lattice thermal conductivities can be further reduced by nanostructuring and whether this can further enhance their thermoelectric performance.}{As bulk nanostructuring routes we studied melt spinning and ball milling. To optimize the compaction process and/or stabilize the nanostructure we varied the process parameters, used additives, and studied clathrate-based composites. Initial results on clathate nanowires as simpler model nanostructures are also presented. △ Less

Submitted 29 July, 2019; originally announced July 2019.

Comments: 19 pages, 28 images

Journal ref: Phys. Status Solidi A 213, 3, 784 (2016)

Dynamics of particle uptake at cell membranes

Authors: Felix Frey, Falko Ziebert, Ulrich S. Schwarz

Abstract: Receptor-mediated endocytosis requires that the energy of adhesion overcomes the deformation energy of the plasma membrane. The resulting driving force is balanced by dissipative forces, leading to deterministic dynamical equations. While the shape of the free membrane does not play an important role for tensed and loose membranes, in the intermediate regime it leads to an important energy barrier… ▽ More Receptor-mediated endocytosis requires that the energy of adhesion overcomes the deformation energy of the plasma membrane. The resulting driving force is balanced by dissipative forces, leading to deterministic dynamical equations. While the shape of the free membrane does not play an important role for tensed and loose membranes, in the intermediate regime it leads to an important energy barrier. Here we show that this barrier is similar to but different from an effective line tension and suggest a simple analytical approximation for it. We then explore the rich dynamics of uptake for particles of different shapes and present the corresponding dynamical state diagrams. We also extend our model to include stochastic fluctuations, which facilitate uptake and lead to corresponding changes in the phase diagrams. △ Less

Submitted 25 October, 2019; v1 submitted 3 May, 2019; originally announced May 2019.

Comments: 20 pages, 19 figures

Journal ref: Phys. Rev. E 100, 052403 (2019)

Stochastic Dynamics of Nanoparticle and Virus Uptake

Authors: Felix Frey, Falko Ziebert, Ulrich S. Schwarz

Abstract: The cellular uptake of nanoparticles or viruses requires that the gain of adhesion energy overcomes the cost of plasma membrane bending. It is well known that this leads to a minimal particle size for uptake. Using a simple deterministic theory for this process, we first show that, for the same radius and volume, cylindrical particles should be taken up faster than spherical particles, both for no… ▽ More The cellular uptake of nanoparticles or viruses requires that the gain of adhesion energy overcomes the cost of plasma membrane bending. It is well known that this leads to a minimal particle size for uptake. Using a simple deterministic theory for this process, we first show that, for the same radius and volume, cylindrical particles should be taken up faster than spherical particles, both for normal and parallel orientations. We then address stochastic effects, which are expected to be relevant due to small system size, and show that, now, spherical particles can have a faster uptake, because the mean first passage time profits from the multiplicative noise induced by the spherical geometry. We conclude that stochastic effects are strongly geometry dependent and may favor spherical shapes during adhesion-driven particle uptake. △ Less

Submitted 3 May, 2019; originally announced May 2019.

Comments: 5 pages, 4 figures

Journal ref: Physical Review Letters 122: 088102 (2019)

Fundamentals of cathodoluminescence in a STEM: The impact of sample geometry and electron beam energy on light emission of semiconductors

Authors: Michael Stöger-Pollach, Kristyna Bukvisova, Sabine schwarz, Michal Kvapil, Tomas Samoril, Michal Horak

Abstract: Cathodoluminescence has attracted interest in scanning transmission electron microscopy since the advent of commercial available detection systems with high efficiency, like the Gatan Vulcan or the Attolight Mönch system. In this work we discuss light emission caused by high-energy electron beams when traversing a semiconducting specimen. We find that it is impossible to directly interpret the spe… ▽ More Cathodoluminescence has attracted interest in scanning transmission electron microscopy since the advent of commercial available detection systems with high efficiency, like the Gatan Vulcan or the Attolight Mönch system. In this work we discuss light emission caused by high-energy electron beams when traversing a semiconducting specimen. We find that it is impossible to directly interpret the spectrum of the emitted light to the inter-band transitions excited by the electron beam, because the Cerenkov effect and the related light guiding modes as well as transition radiation is altering the spectra. Total inner reflection and subsequent interference effects are changing the spectral shape dependent on the sample shape and geometry, sample thickness, and beam energy, respectively. A detailed study on these parameters is given using silicon and GaAs as test materials. △ Less

Submitted 19 February, 2019; originally announced February 2019.

Comments: 21 pages, 16 figures,

MSC Class: 78-05

Valley addressable exciton-polaritons in atomically thin semiconductors

Authors: S. Dufferwiel, T. P. Lyons, D. D. Solnyshkov, A. A. P. Trichet, F. Withers, S. Schwarz, G. Malpuech, J. M. Smith, K. S. Novoselov, M. S. Skolnick, D. N. Krizhanovskii, A. I. Tartakovskii

Abstract: While conventional semiconductor technology relies on the manipulation of electrical charge for the implementation of computational logic, additional degrees of freedom such as spin and valley offer alternative avenues for the encoding of information. In transition metal dichalcogenide (TMD) monolayers, where spin-valley locking is present, strong retention of valley chirality has been reported fo… ▽ More While conventional semiconductor technology relies on the manipulation of electrical charge for the implementation of computational logic, additional degrees of freedom such as spin and valley offer alternative avenues for the encoding of information. In transition metal dichalcogenide (TMD) monolayers, where spin-valley locking is present, strong retention of valley chirality has been reported for MoS$_2$, WSe$_2$ and WS$_2$ while MoSe$_2$ shows anomalously low valley polarisation retention. In this work, chiral selectivity of MoSe$_2$ cavity polaritons under helical excitation is reported with a polarisation degree that can be controlled by the exciton-cavity detuning. In contrast to the very low circular polarisation degrees seen in MoSe$_2$ exciton and trion resonances, we observe a significant enhancement of up to 7 times when in the polaritonic regime. Here, polaritons introduce a fast decay mechanism which inhibits full valley pseudospin relaxation and thus allows for increased retention of injected polarisation in the emitted light. A dynamical model applicable to cavity-polaritons in any TMD semiconductor, reproduces the detuning dependence through the incorporation of the cavity-modified exciton relaxation, allowing an estimate of the spin relaxation time in MoSe$_2$ which is an order of magnitude faster than those reported in other TMDs. The valley addressable exciton-polaritons reported here offer robust valley polarised states demonstrating the prospect of valleytronic devices based upon TMDs embedded in photonic structures, with significant potential for valley-dependent nonlinear polariton-polariton interactions. △ Less

Submitted 15 December, 2016; originally announced December 2016.

Stochastic switching between multistable oscillation patterns of the Min-system

Authors: Artemij Amiranashvili, Nikolas D Schnellbächer, Ulrich S Schwarz

Abstract: The spatiotemporal oscillation patterns of the proteins MinD and MinE are used by the bacterium E. coli to sense its own geometry. Strikingly, both computer simulations and experiments have recently shown that for the same geometry of the reaction volume, different oscillation patterns can be stable, with stochastic switching between them. Here we use particle-based Brownian dynamics simulations t… ▽ More The spatiotemporal oscillation patterns of the proteins MinD and MinE are used by the bacterium E. coli to sense its own geometry. Strikingly, both computer simulations and experiments have recently shown that for the same geometry of the reaction volume, different oscillation patterns can be stable, with stochastic switching between them. Here we use particle-based Brownian dynamics simulations to predict the relative frequency of different oscillation patterns over a large range of three-dimensional compartment geometries, in excellent agreement with experimental results. Fourier analyses as well as pattern recognition algorithms are used to automatically identify the different oscillation patterns and the switching rates between them. We also identify novel oscillation patterns in three-dimensional compartments with membrane-covered walls and identify a linear relation between the bound Min-protein densities and the volume-to-surface ratio. In general, our work shows how geometry sensing is limited by multistability and stochastic fluctuations. △ Less

Submitted 17 October, 2016; originally announced October 2016.

Comments: 38 pages with 14 main figures; supplemental text with supplemental figures included as appendix

Journal ref: New J. Phys. 18 (2016) 093049

Electrically pumped single-defect light emitters in WSe$_2$

Authors: S. Schwarz, A. Kozikov, F. Withers, J. K. Maguire, A. P. Foster, S. Dufferwiel, L. Hague, M. N. Makhonin, L. R. Wilson, A . K. Geim, K. S. Novoselov, A. I. Tartakovskii

Abstract: Recent developments in fabrication of van der Waals heterostructures enable new type of devices assembled by stacking atomically thin layers of two-dimensional materials. Using this approach, we fabricate light-emitting devices based on a monolayer WSe$_2$, and also comprising boron nitride tunnelling barriers and graphene electrodes, and observe sharp luminescence spectra from individual defects… ▽ More Recent developments in fabrication of van der Waals heterostructures enable new type of devices assembled by stacking atomically thin layers of two-dimensional materials. Using this approach, we fabricate light-emitting devices based on a monolayer WSe$_2$, and also comprising boron nitride tunnelling barriers and graphene electrodes, and observe sharp luminescence spectra from individual defects in WSe$_2$ under both optical and electrical excitation. This paves the way towards the realization of electrically-pumped quantum emitters in atomically thin semiconductors. In addition we demonstrate tuning by more than 1 meV of the emission energy of the defect luminescence by applying a vertical electric field. This provides an estimate of the permanent electric dipole created by the corresponding electron-hole pair. The light-emitting devices investigated in our work can be assembled on a variety of substrates enabling a route to integration of electrically pumped single quantum emitters with existing technologies in nano-photonics and optoelectronics. △ Less

Submitted 6 May, 2016; originally announced May 2016.

Journal ref: 2D Mater. 3 (2016) 025038

WSe2 light-emitting tunneling transistors with enhanced brightness at room temperature

Authors: F. Withers, O. Del Pozo-Zamudio, S. Schwarz, S. Dufferwiel, P. M. Walker, T. Godde, A. P. Rooney, A. Gholinia, C. R. Woods, P. Blake, S. J. Haigh, K. Watanabe, T. Taniguchi, I. L. Aleiner, A. K. Geim, V. I. Falko, A. I. Tartakovskii, K. S. Novoselov

Abstract: Monolayers of molybdenum and tungsten dichalcogenides are direct bandgap semiconductors, which makes them promising for opto-electronic applications. In particular, van der Waals heterostructures consisting of monolayers of MoS2 sandwiched between atomically thin hexagonal boron nitride (hBN) and graphene electrodes allows one to obtain light emitting quantum wells (LEQWs) with low-temperature ext… ▽ More Monolayers of molybdenum and tungsten dichalcogenides are direct bandgap semiconductors, which makes them promising for opto-electronic applications. In particular, van der Waals heterostructures consisting of monolayers of MoS2 sandwiched between atomically thin hexagonal boron nitride (hBN) and graphene electrodes allows one to obtain light emitting quantum wells (LEQWs) with low-temperature external quantum efficiency (EQE) of 1%. However, the EQE of MoS2 and MoSe2-based LEQWs shows behavior common for many other materials: it decreases fast from cryogenic conditions to room temperature, undermining their practical applications. Here we compare MoSe2 and WSe2 LEQWs. We show that the EQE of WSe2 devices grows with temperature, with room temperature EQE reaching 5%, which is 250x more than the previous best performance of MoS2 and MoSe2 quantum wells in ambient conditions. We attribute such a different temperature dependences to the inverted sign of spin-orbit splitting of conduction band states in tungsten and molybdenum dichalcogenides, which makes the lowest-energy exciton in WSe2 dark. △ Less

Submitted 19 November, 2015; originally announced November 2015.

Photoluminescence and Raman investigation of stability of InSe and GaSe thin films

Authors: O. Del Pozo-Zamudio, S. Schwarz, J. Klein, R. C. Schofield, E. A. Chekhovich, O. Ceylan, E. Margapoti, A. I. Dmitriev, G. V. Lashkarev, D. N. Borisenko, N. N. Kolesnikov, J. J. Finley, A. I. Tartakovskii

Abstract: Layered III-chalcogenide compounds belong to a variety of layered crystals that can be implemented in van der Waals heterostructures. Here we report an optical study of the stability of two of these compounds: indium selenide (InSe) and gallium selenide (GaSe). Micro-photoluminescence (PL) and Raman spectroscopy are used to determine how the properties of thin films of these materials change when… ▽ More Layered III-chalcogenide compounds belong to a variety of layered crystals that can be implemented in van der Waals heterostructures. Here we report an optical study of the stability of two of these compounds: indium selenide (InSe) and gallium selenide (GaSe). Micro-photoluminescence (PL) and Raman spectroscopy are used to determine how the properties of thin films of these materials change when they are exposed to air at room temperature. We find that in GaSe films, PL signal decreases on average below 50% over 24 (72) hours of exposure for films with thicknesses 10-25 (48-75) nm. In contrast, weak PL decrease of less than 20% is observed for InSe nm films after exposure of 100 hours. Similar trends are observed in Raman spectroscopy: within a week, the Raman signal decreases by a factor of 10 for a 24 nm thick GaSe, whereas no decrease was found for a 16 nm InSe film. We estimate that when exposed to air, the layers adjacent to the GaSe film surface degrade and become non-luminescent with a rate of 0.14$\pm$0.05 nm/hour. We show that the life-time of the GaSe films can be increased by up to two orders of magnitude (to several months) by encapsulation in dielectric materials such as SiO$_2$ or Si$_x$N$_y$. △ Less

Submitted 18 June, 2015; originally announced June 2015.

Traction force microscopy on soft elastic substrates: a guide to recent computational advances

Authors: Ulrich S. Schwarz, Jerome R. D. Soine

Abstract: The measurement of cellular traction forces on soft elastic substrates has become a standard tool for many labs working on mechanobiology. Here we review the basic principles and different variants of this approach. In general, the extraction of the substrate displacement field from image data and the reconstruction procedure for the forces are closely linked to each other and limited by the prese… ▽ More The measurement of cellular traction forces on soft elastic substrates has become a standard tool for many labs working on mechanobiology. Here we review the basic principles and different variants of this approach. In general, the extraction of the substrate displacement field from image data and the reconstruction procedure for the forces are closely linked to each other and limited by the presence of experimental noise. We discuss different strategies to reconstruct cellular forces as they follow from the foundations of elasticity theory, including two- versus three-dimensional, inverse versus direct and linear versus non-linear approaches. We also discuss how biophysical models can improve force reconstruction and comment on practical issues like substrate preparation, image processing and the availability of software for traction force microscopy. △ Less

Submitted 8 June, 2015; originally announced June 2015.

Comments: Revtex, 29 pages, 3 PDF figures, 2 tables. BBA - Molecular Cell Research, online since 27 May 2015, special issue on mechanobiology

Exciton-polaritons in van der Waals heterostructures embedded in tunable microcavities

Authors: S. Dufferwiel, S. Schwarz, F. Withers, A. A. P. Trichet, F. Li, M. Sich, O. Del Pozo-Zamudio, C. Clark, A. Nalitov, D. D. Solnyshkov, G. Malpuech, K. S. Novoselov, J. M. Smith, M. S. Skolnick, D. N. Krizhanovskii, A. I. Tartakovskii

Abstract: Layered materials can be assembled vertically to fabricate a new class of van der Waals (VDW) heterostructures a few atomic layers thick, compatible with a wide range of substrates and optoelectronic device geometries, enabling new strategies for control of light-matter coupling. Here, we incorporate molybdenum diselenide/boron nitride (MoSe$_2$/hBN) quantum wells (QWs) in a tunable optical microc… ▽ More Layered materials can be assembled vertically to fabricate a new class of van der Waals (VDW) heterostructures a few atomic layers thick, compatible with a wide range of substrates and optoelectronic device geometries, enabling new strategies for control of light-matter coupling. Here, we incorporate molybdenum diselenide/boron nitride (MoSe$_2$/hBN) quantum wells (QWs) in a tunable optical microcavity. Part-light-part-matter polariton eigenstates are observed as a result of the strong coupling between MoSe$_2$ excitons and cavity photons, evidenced from a clear anticrossing between the neutral exciton and the cavity modes with a splitting of 20 meV for a single MoSe$_2$ monolayer QW, enhanced to 29 meV in MoSe$_2$/hBN/MoSe$_2$ double-QWs. The splitting at resonance provides an estimate of the exciton radiative lifetime of 0.4 ps. Our results pave the way for room temperature polaritonic devices based on multiple-QW VDW heterostructures, where polariton condensation and electrical polariton injection through the incorporation of graphene contacts may be realised. △ Less

Submitted 17 May, 2015; originally announced May 2015.

Optical properties of two-dimensional gallium chalcogenide films

Authors: O. Del Pozo-Zamudio, S. Schwarz, M. Sich, I. A. Akimov, M. Bayer, R. C. Schofield, E. A. Chekhovich, B. J. Robinson, N. D. Kay, O. V. Kolosov, A. I. Dmitriev, G. V. Lashkarev, D. N. Borisenko, N. N. Kolesnikov, A. I. Tartakovskii

Abstract: Gallium chalcogenides are promising building blocks for novel van der Waals heterostructures. We report low-temperature micro-photoluminescence (PL) of GaTe and GaSe films with thickness ranging from from 200 nm to a single unit cell. In both materials, PL shows dramatic decrease by 10$^4$-10$^5$ when film thickness is reduced from 200 to 10 nm. Based on evidence from cw and time-resolved PL, we p… ▽ More Gallium chalcogenides are promising building blocks for novel van der Waals heterostructures. We report low-temperature micro-photoluminescence (PL) of GaTe and GaSe films with thickness ranging from from 200 nm to a single unit cell. In both materials, PL shows dramatic decrease by 10$^4$-10$^5$ when film thickness is reduced from 200 to 10 nm. Based on evidence from cw and time-resolved PL, we propose a model explaining the PL decrease as a result of non-radiative carrier escape via surface states. △ Less

Submitted 17 March, 2015; v1 submitted 9 January, 2015; originally announced January 2015.

Journal ref: 2D Materials, 2 (3), 035010 (2015)

Geometrical model for malaria parasite migration in structured environments

Authors: Anna Battista, Friedrich Frischknecht, Ulrich S. Schwarz

Abstract: Malaria is transmitted to vertebrates via a mosquito bite, during which rod-like and crescent-shaped parasites, called sporozoites, are injected into the skin of the host. Searching for a blood capillary to penetrate, sporozoites move quickly in locally helical trajectories, that are frequently perturbed by interactions with the extracellular environment. Here we present a theoretical analysis of… ▽ More Malaria is transmitted to vertebrates via a mosquito bite, during which rod-like and crescent-shaped parasites, called sporozoites, are injected into the skin of the host. Searching for a blood capillary to penetrate, sporozoites move quickly in locally helical trajectories, that are frequently perturbed by interactions with the extracellular environment. Here we present a theoretical analysis of the active motility of sporozoites in a structured environment. The sporozoite is modelled as a self-propelled rod with spontaneous curvature and bending rigidity. It interacts with hard obstacles through collision rules inferred from experimental observation of two-dimensional sporozoite movement in pillar arrays. Our model shows that complex motion patterns arise from the geometrical shape of the parasite and that its mechanical flexibility is crucial for stable migration patterns. Extending the model to three dimensions reveals that a bent and twisted rod can associate to cylindrical obstacles in a manner reminiscent of the association of sporozoites to blood capillaries, supporting the notion of a prominent role of cell shape during malaria transmission. △ Less

Submitted 23 October, 2014; originally announced October 2014.

Comments: latex, 14 pages, 12 figures

Journal ref: Phys. Rev. E 90:042720, Oct 2014

Two-dimensional metal-chalcogenide films in tunable optical microcavities

Authors: S. Schwarz, S. Dufferwiel, P. M. Walker, F. Withers, A. A. P. Trichet, M. Sich, F. Li, E. A. Chekhovich, D. N. Borisenko, N. N. Kolesnikov, K. S. Novoselov, M. S. Skolnick, J. M Smith, D. N. Krizhanovskii, A. I. Tartakovskii

Abstract: Quasi-two-dimensional (2D) films of layered metal-chalcogenides have attractive optoelectronic properties. However, photonic applications of thin films may be limited owing to weak light absorption and surface effects leading to reduced quantum yield. Integration of 2D films in optical microcavities will permit these limitations to be overcome owing to modified light coupling with the films. Here… ▽ More Quasi-two-dimensional (2D) films of layered metal-chalcogenides have attractive optoelectronic properties. However, photonic applications of thin films may be limited owing to weak light absorption and surface effects leading to reduced quantum yield. Integration of 2D films in optical microcavities will permit these limitations to be overcome owing to modified light coupling with the films. Here we present tunable microcavities with embedded monolayer MoS2 or few monolayer GaSe films. We observe significant modification of spectral and temporal properties of photoluminescence (PL): PL is emitted in spectrally narrow and wavelength-tunable cavity modes with quality factors up to 7400; PL life-time shortening by a factor of 10 is achieved, a consequence of Purcell enhancement of the spontaneous emission rate. This work has potential to pave the way to microcavity-enhanced light-emitting devices based on layered 2D materials and their heterostructures, and also opens possibilities for cavity QED in a new material system of van der Waals crystals. △ Less

Submitted 15 August, 2014; originally announced August 2014.

Journal ref: Nano Lett., 14, 7003, 2014

Dynamics of Cell Shape and Forces on Micropatterned Substrates Predicted by a Cellular Potts Model

Authors: Philipp J. Albert, Ulrich S. Schwarz

Abstract: Micropatterned substrates are often used to standardize cell experiments and to quantitatively study the relation between cell shape and function. Moreover, they are increasingly used in combination with traction force microscopy on soft elastic substrates. To predict the dynamics and steady states of cell shape and forces without any a priori knowledge of how the cell will spread on a given micro… ▽ More Micropatterned substrates are often used to standardize cell experiments and to quantitatively study the relation between cell shape and function. Moreover, they are increasingly used in combination with traction force microscopy on soft elastic substrates. To predict the dynamics and steady states of cell shape and forces without any a priori knowledge of how the cell will spread on a given micropattern, here we extend earlier formulations of the two-dimensional cellular Potts model. The third dimension is treated as an area reservoir for spreading. To account for local contour reinforcement by peripheral bundles, we augment the cellular Potts model by elements of the tension-elasticity model. We first parameterize our model and show that it accounts for momentum conservation. We then demonstrate that it is in good agreement with experimental data for shape, spreading dynamics, and traction force patterns of cells on micropatterned substrates. We finally predict shapes and forces for micropatterns that have not yet been experimentally studied. △ Less

Submitted 19 May, 2014; originally announced May 2014.

Comments: Revtex, 32 pages, 11 PDF figures, to appear in Biophysical Journal

Studying protein assembly with reversible Brownian dynamics of patchy particles

Authors: Heinrich C. R. Klein, Ulrich S. Schwarz

Abstract: Assembly of protein complexes like virus shells, the centriole, the nuclear pore complex or the actin cytoskeleton is strongly determined by their spatial structure. Moreover it is becoming increasingly clear that the reversible nature of protein assembly is also an essential element for their biological function. Here we introduce a computational approach for the Brownian dynamics of patchy parti… ▽ More Assembly of protein complexes like virus shells, the centriole, the nuclear pore complex or the actin cytoskeleton is strongly determined by their spatial structure. Moreover it is becoming increasingly clear that the reversible nature of protein assembly is also an essential element for their biological function. Here we introduce a computational approach for the Brownian dynamics of patchy particles with anisotropic assemblies and fully reversible reactions. Different particles stochastically associate and dissociate with microscopic reaction rates depending on their relative spatial positions. The translational and rotational diffusive properties of all protein complexes are evaluated on-the-fly. Because we focus on reversible assembly, we introduce a scheme which ensures detailed balance for patchy particles. We then show how the macroscopic rates follow from the microscopic ones. As an instructive example, we study the assembly of a pentameric ring structure, for which we find excellent agreement between simulation results and a macroscopic kinetic description without any adjustable parameters. This demonstrates that our approach correctly accounts for both the diffusive and reactive processes involved in protein assembly. △ Less

Submitted 12 May, 2014; v1 submitted 23 April, 2014; originally announced April 2014.

Comments: Revtex, 41 pages, 9 figures, includes some small corrections compared to first version

Journal ref: J. Chem. Phys. 140, 184112 (2014)

Stochastic dynamics and mechanosensitivity of myosin II minifilaments

Authors: Philipp J. Albert, Thorsten Erdmann, Ulrich S. Schwarz

Abstract: Tissue cells are in a state of permanent mechanical tension that is maintained mainly by myosin II minifilaments, which are bipolar assemblies of tens of myosin II molecular motors contracting actin networks and bundles. Here we introduce a stochastic model for myosin II minifilaments as two small myosin II motor ensembles engaging in a stochastic tug-of-war. Each of the two ensembles is described… ▽ More Tissue cells are in a state of permanent mechanical tension that is maintained mainly by myosin II minifilaments, which are bipolar assemblies of tens of myosin II molecular motors contracting actin networks and bundles. Here we introduce a stochastic model for myosin II minifilaments as two small myosin II motor ensembles engaging in a stochastic tug-of-war. Each of the two ensembles is described by the parallel cluster model that allows us to use exact stochastic simulations and at the same time to keep important molecular details of the myosin II cross-bridge cycle. Our simulation and analytical results reveal a strong dependence of myosin II minifilament dynamics on environmental stiffness that is reminiscent of the cellular response to substrate stiffness. For small stiffness, minifilaments form transient crosslinks exerting short spikes of force with negligible mean. For large stiffness, minifilaments form near permanent crosslinks exerting a mean force which hardly depends on environmental elasticity. This functional switch arises because dissociation after the power stroke is suppressed by force (catch bonding) and because ensembles can no longer perform the power stroke at large forces. Symmetric myosin II minifilaments perform a random walk with an effective diffusion constant which decreases with increasing ensemble size, as demonstrated for rigid substrates with an analytical treatment. △ Less

Submitted 15 September, 2014; v1 submitted 6 April, 2014; originally announced April 2014.

Comments: Revtex, 27 pages, 6 figures

Journal ref: Philipp J Albert et al 2014 New J. Phys. 16 093019

Physics of adherent cells

Authors: Ulrich S. Schwarz, Samuel S. Safran

Abstract: One of the most unique physical features of cell adhesion to external surfaces is the active generation of mechanical force at the cell-material interface. This includes pulling forces generated by contractile polymer bundles and networks, and pushing forces generated by the polymerization of polymer networks. These forces are transmitted to the substrate mainly by focal adhesions, which are large… ▽ More One of the most unique physical features of cell adhesion to external surfaces is the active generation of mechanical force at the cell-material interface. This includes pulling forces generated by contractile polymer bundles and networks, and pushing forces generated by the polymerization of polymer networks. These forces are transmitted to the substrate mainly by focal adhesions, which are large, yet highly dynamic adhesion clusters. Tissue cells use these forces to sense the physical properties of their environment and to communicate with each other. The effect of forces is intricately linked to the material properties of cells and their physical environment. Here a review is given of recent progress in our understanding of the role of forces in cell adhesion from the viewpoint of theoretical soft matter physics and in close relation to the relevant experiments. △ Less

Submitted 9 September, 2013; originally announced September 2013.

Comments: review, 60 pages, 25 figures

Journal ref: Reviews of Modern Physics 85: 1327-1381 (2013)

Optical investigation of the natural electron doping in thin MoS2 films deposited on dielectric substrates

Authors: D. Sercombe, S. Schwarz, O. Del Pozo-Zamudio, F. Liu, B. J. Robinson, E. A. Chekhovich, I. I. Tartakovskii, O. Kolosov, A. I. Tartakovskii

Abstract: Two-dimensional (2D) compounds provide unique building blocks for novel layered devices and hybrid photonic structures. However, large surface-to-volume ratio in thin films enhances the significance of surface interactions and charging effects requiring new understanding. Here we use micro-photoluminescence (PL) and ultrasonic force microscopy to explore the influence of the dielectric environment… ▽ More Two-dimensional (2D) compounds provide unique building blocks for novel layered devices and hybrid photonic structures. However, large surface-to-volume ratio in thin films enhances the significance of surface interactions and charging effects requiring new understanding. Here we use micro-photoluminescence (PL) and ultrasonic force microscopy to explore the influence of the dielectric environment on optical properties of a few monolayer MoS2 films. PL spectra for MoS2 films deposited on SiO2 substrates are found to vary widely. This film-to-film variation is suppressed by additional capping of MoS2 with SiO2 and SiN, improving mechanical coupling of MoS2 with surrounding dielectrics. We show that the observed PL non-uniformities are related to strong variation in the local electron charging of MoS2 films. In completely encapsulated films, negative charging is enhanced leading to uniform optical properties. Observed great sensitivity of optical characteristics of 2D films to surface interactions has important implications for optoelectronics applications of layered materials. △ Less

Submitted 21 January, 2014; v1 submitted 26 April, 2013; originally announced April 2013.

Comments: latest version

Journal ref: Scientific Reports 3, 3489 (2013)

Mesoscopic model for filament orientation in growing actin networks: the role of obstacle geometry

Authors: Julian Weichsel, Ulrich S. Schwarz

Abstract: Propulsion by growing actin networks is a universal mechanism used in many different biological systems. Although the core molecular machinery for actin network growth is well preserved in most cases, the geometry of the propelled obstacle can vary considerably. In recent years, filament orientation distribution has emerged as an important observable characterizing the structure and dynamical stat… ▽ More Propulsion by growing actin networks is a universal mechanism used in many different biological systems. Although the core molecular machinery for actin network growth is well preserved in most cases, the geometry of the propelled obstacle can vary considerably. In recent years, filament orientation distribution has emerged as an important observable characterizing the structure and dynamical state of the growing network. Here we derive several continuum equations for the orientation distribution of filaments growing behind stiff obstacles of various shapes and validate the predicted steady state orientation patterns by stochastic computer simulations based on discrete filaments. We use an ordinary differential equation approach to demonstrate that for flat obstacles of finite size, two fundamentally different orientation patterns peaked at either +35/-35 or +70/0/-70 degrees exhibit mutually exclusive stability, in agreement with earlier results for flat obstacles of very large lateral extension. We calculate and validate phase diagrams as a function of model parameters and show how this approach can be extended to obstacles with piecewise straight contours. For curved obstacles, we arrive at a partial differential equation in the continuum limit, which again is in good agreement with the computer simulations. In all cases, we can identify the same two fundamentally different orientation patterns, but only within an appropriate reference frame, which is adjusted to the local orientation of the obstacle contour. Our results suggest that two fundamentally different network architectures compete with each other in growing actin networks, irrespective of obstacle geometry, and clarify how simulated and electron tomography data have to be analyzed for non-flat obstacle geometries. △ Less

Submitted 13 April, 2013; originally announced April 2013.

Comments: revtex, 36 pages, 7 figures

Journal ref: New J. Phys. 15:035006 (2013)

Unifying autocatalytic and zeroth order branching models for growing actin networks

Authors: Julian Weichsel, Krzysztof Baczynski, Ulrich S. Schwarz

Abstract: The directed polymerization of actin networks is an essential element of many biological processes, including cell migration. Different theoretical models considering the interplay between the underlying processes of polymerization, capping and branching have resulted in conflicting predictions. One of the main reasons for this discrepancy is the assumption of a branching reaction that is either f… ▽ More The directed polymerization of actin networks is an essential element of many biological processes, including cell migration. Different theoretical models considering the interplay between the underlying processes of polymerization, capping and branching have resulted in conflicting predictions. One of the main reasons for this discrepancy is the assumption of a branching reaction that is either first order (autocatalytic) or zeroth order in the number of existing filaments. Here we introduce a unifying framework from which the two established scenarios emerge as limiting cases for low and high filament number. A smooth transition between the two cases is found at intermediate conditions. We also derive a threshold for the capping rate, above which autocatalytic growth is predicted at sufficiently low filament number. Below the threshold, zeroth order characteristics are predicted to dominate the dynamics of the network for all accessible filament numbers. Together, this allows cells to grow stable actin networks over a large range of different conditions. △ Less

Submitted 22 February, 2013; v1 submitted 19 July, 2012; originally announced July 2012.

Comments: revtex, 5 pages, 4 figures

Journal ref: Phys. Rev. E, 87:040701, Apr 2013

Stochastic force generation by small ensembles of myosin II motors

Authors: Thorsten Erdmann, Ulrich S. Schwarz

Abstract: Forces in the actin cytoskeleton are generated by small groups of non-processive myosin II motors for which stochastic effects are highly relevant. Using a crossbridge model with the assumptions of fast powerstroke kinetics and equal load sharing between equivalent states, we derive a one-step master equation for the activity of a finite-sized ensemble of mechanically coupled myosin II motors. For… ▽ More Forces in the actin cytoskeleton are generated by small groups of non-processive myosin II motors for which stochastic effects are highly relevant. Using a crossbridge model with the assumptions of fast powerstroke kinetics and equal load sharing between equivalent states, we derive a one-step master equation for the activity of a finite-sized ensemble of mechanically coupled myosin II motors. For constant external load, this approach yields analytical results for duty ratio and force-velocity relation as a function of ensemble size. We find that stochastic effects cannot be neglected for ensemble sizes below 15. The one-step master equation can be used also for efficient computer simulations with linear elastic external load and reveals the sequence of build-up of force and ensemble rupture that is characteristic for reconstituted actomyosin contractility. △ Less

Submitted 14 February, 2012; originally announced February 2012.

Comments: revtex, 5 pages, 4 figures

Force localization in contracting cell layers

Authors: Carina M. Edwards, Ulrich S. Schwarz

Abstract: Epithelial cell layers on soft elastic substrates or pillar arrays are commonly used as model systems for investigating the role of force in tissue growth, maintenance and repair. Here we show analytically that the experimentally observed localization of traction forces to the periphery of the cell layers does not necessarily imply increased local cell activity, but follows naturally from the elas… ▽ More Epithelial cell layers on soft elastic substrates or pillar arrays are commonly used as model systems for investigating the role of force in tissue growth, maintenance and repair. Here we show analytically that the experimentally observed localization of traction forces to the periphery of the cell layers does not necessarily imply increased local cell activity, but follows naturally from the elastic problem of a finite-sized contractile layer coupled to an elastic foundation. For homogeneous contractility, the force localization is determined by one dimensionless parameter interpolating between linear and exponential force profiles for the extreme cases of very soft and very stiff substrates, respectively. If contractility is sufficiently increased at the periphery, outward directed displacements can occur at intermediate positions, although the edge itself still retracts. We also show that anisotropic extracellular stiffness leads to force localization in the stiffer direction, as observed experimentally. △ Less

Submitted 13 January, 2012; originally announced January 2012.

Comments: 4 pages, 4 postscript figures

Journal ref: Phys. Rev. Lett., 107:128101, 2011

Viscoelastic response of contractile filament bundles

Authors: Achim Besser, Julien Colombelli, Ernst H. K. Stelzer, Ulrich S. Schwarz

Abstract: The actin cytoskeleton of adherent tissue cells often condenses into filament bundles contracted by myosin motors, so-called stress fibers, which play a crucial role in the mechanical interaction of cells with their environment. Stress fibers are usually attached to their environment at the endpoints, but possibly also along their whole length. We introduce a theoretical model for such contractile… ▽ More The actin cytoskeleton of adherent tissue cells often condenses into filament bundles contracted by myosin motors, so-called stress fibers, which play a crucial role in the mechanical interaction of cells with their environment. Stress fibers are usually attached to their environment at the endpoints, but possibly also along their whole length. We introduce a theoretical model for such contractile filament bundles which combines passive viscoelasticity with active contractility. The model equations are solved analytically for two different types of boundary conditions. A free boundary corresponds to stress fiber contraction dynamics after laser surgery and results in good agreement with experimental data. Imposing cyclic varying boundary forces allows us to calculate the complex modulus of a single stress fiber. △ Less

Submitted 25 February, 2011; originally announced February 2011.

Comments: Revtex with 24 pages, 7 Postscript figures included, accepted for publication in Phys. Rev. E

Hysteresis in the cell response to time-dependent substrate stiffness

Authors: A. Besser, U. S. Schwarz

Abstract: Mechanical cues like the rigidity of the substrate are main determinants for the decision making of adherent cells. Here we use a mechano-chemical model to predict the cellular response to varying substrate stiffness. The model equations combine the mechanics of contractile actin filament bundles with a model for the Rho-signaling pathway triggered by forces at cell-matrix contacts. A bifurcation… ▽ More Mechanical cues like the rigidity of the substrate are main determinants for the decision making of adherent cells. Here we use a mechano-chemical model to predict the cellular response to varying substrate stiffness. The model equations combine the mechanics of contractile actin filament bundles with a model for the Rho-signaling pathway triggered by forces at cell-matrix contacts. A bifurcation analysis of cellular contractility as a function of substrate stiffness reveals a bistable response, thus defining a lower threshold of stiffness, below which cells are not able to build up contractile forces, and an upper threshold of stiffness, above which cells are always in a strongly contracted state. Using the full dynamical model, we predict that rate-dependent hysteresis will occur in the cellular traction forces when cells are exposed to substrates of time-dependent stiffness. △ Less

Submitted 7 July, 2010; originally announced July 2010.

Comments: Revtex, 4 PDF figures

Journal ref: Biophysical Journal, Volume 99, Issue 1, L10-L12, 7 July 2010

Role of anisotropy for protein-protein encounter

Authors: Jakob Schluttig, Christian B. Korn, Ulrich S. Schwarz

Abstract: Protein-protein interactions comprise both transport and reaction steps. During the transport step, anisotropy of proteins and their complexes is important both for hydrodynamic diffusion and accessibility of the binding site. Using a Brownian dynamics approach and extensive computer simulations, we quantify the effect of anisotropy on the encounter rate of ellipsoidal particles covered with sph… ▽ More Protein-protein interactions comprise both transport and reaction steps. During the transport step, anisotropy of proteins and their complexes is important both for hydrodynamic diffusion and accessibility of the binding site. Using a Brownian dynamics approach and extensive computer simulations, we quantify the effect of anisotropy on the encounter rate of ellipsoidal particles covered with spherical encounter patches. We show that the encounter rate $k$ depends on the aspect ratios $ξ$ mainly through steric effects, while anisotropic diffusion has only a little effect. Calculating analytically the crossover times from anisotropic to isotropic diffusion in three dimensions, we find that they are much smaller than typical protein encounter times, in agreement with our numerical results. △ Less

Submitted 24 February, 2010; originally announced February 2010.

Comments: 4 pages, Revtex with 3 figures, to appear as a Rapid Communication in Physical Review E

Stochastic simulations of cargo transport by processive molecular motors

Authors: Christian B. Korn, Stefan Klumpp, Reinhard Lipowsky, Ulrich S. Schwarz

Abstract: We use stochastic computer simulations to study the transport of a spherical cargo particle along a microtubule-like track on a planar substrate by several kinesin-like processive motors. Our newly developed adhesive motor dynamics algorithm combines the numerical integration of a Langevin equation for the motion of a sphere with kinetic rules for the molecular motors. The Langevin part includes… ▽ More We use stochastic computer simulations to study the transport of a spherical cargo particle along a microtubule-like track on a planar substrate by several kinesin-like processive motors. Our newly developed adhesive motor dynamics algorithm combines the numerical integration of a Langevin equation for the motion of a sphere with kinetic rules for the molecular motors. The Langevin part includes diffusive motion, the action of the pulling motors, and hydrodynamic interactions between sphere and wall. The kinetic rules for the motors include binding to and unbinding from the filament as well as active motor steps. We find that the simulated mean transport length increases exponentially with the number of bound motors, in good agreement with earlier results. The number of motors in binding range to the motor track fluctuates in time with a Poissonian distribution, both for springs and cables being used as models for the linker mechanics. Cooperativity in the sense of equal load sharing only occurs for high values for viscosity and attachment time. △ Less

Submitted 11 December, 2009; originally announced December 2009.

Comments: 40 pages, Revtex with 13 figures, to appear in Journal of Chemical Physics

Journal ref: J. Chem. Phys. 131:245107, 2009

Effect of adhesion geometry and rigidity on cellular force distributions

Authors: Ilka B. Bischofs, Sebastian S. Schmidt, Ulrich S. Schwarz

Abstract: The behaviour and fate of tissue cells is controlled by the rigidity and geometry of their adhesive environment, possibly through forces localized to sites of adhesion. We introduce a mechanical model that predicts cellular force distributions for cells adhering to adhesive patterns with different geometries and rigidities. For continuous adhesion along a closed contour, forces are predicted to… ▽ More The behaviour and fate of tissue cells is controlled by the rigidity and geometry of their adhesive environment, possibly through forces localized to sites of adhesion. We introduce a mechanical model that predicts cellular force distributions for cells adhering to adhesive patterns with different geometries and rigidities. For continuous adhesion along a closed contour, forces are predicted to be localized to the corners. For discrete sites of adhesion, the model predicts the forces to be mainly determined by the lateral pull of the cell contour. With increasing distance between two neighboring sites of adhesion, the adhesion force increases because cell shape results in steeper pulling directions. Softer substrates result in smaller forces. Our predictions agree well with experimental force patterns measured on pillar assays. △ Less

Submitted 23 July, 2009; originally announced July 2009.

Comments: 4 pages, Revtex with 4 figures

Journal ref: Phys Rev Lett 103, 048101 (2009)

Dynamic force spectroscopy on multiple bonds: experiments and model

Authors: T. Erdmann, S. Pierrat, P. Nassoy, U. S. Schwarz

Abstract: We probe the dynamic strength of multiple biotin-streptavidin adhesion bonds under linear loading using the biomembrane force probe setup for dynamic force spectroscopy. Measured rupture force histograms are compared to results from a master equation model for the stochastic dynamics of bond rupture under load. This allows us to extract the distribution of the number of initially closed bonds. W… ▽ More We probe the dynamic strength of multiple biotin-streptavidin adhesion bonds under linear loading using the biomembrane force probe setup for dynamic force spectroscopy. Measured rupture force histograms are compared to results from a master equation model for the stochastic dynamics of bond rupture under load. This allows us to extract the distribution of the number of initially closed bonds. We also extract the molecular parameters of the adhesion bonds, in good agreement with earlier results from single bond experiments. Our analysis shows that the peaks in the measured histograms are not simple multiples of the single bond values, but follow from a superposition procedure which generates different peak positions. △ Less

Submitted 18 December, 2007; originally announced December 2007.

Comments: to appear in Europhysics Letters

Journal ref: Europhys. Lett., 81:48001, 2008

Impact of receptor-ligand distance on adhesion cluster stability

Authors: T. Erdmann, U. S. Schwarz

Abstract: Cells in multicellular organisms adhere to the extracellular matrix through two-dimensional clusters spanning a size range from very few to thousands of adhesion bonds. For many common receptor-ligand systems, the ligands are tethered to a surface via polymeric spacers with finite binding range, thus adhesion cluster stability crucially depends on receptor-ligand distance. We introduce a one-ste… ▽ More Cells in multicellular organisms adhere to the extracellular matrix through two-dimensional clusters spanning a size range from very few to thousands of adhesion bonds. For many common receptor-ligand systems, the ligands are tethered to a surface via polymeric spacers with finite binding range, thus adhesion cluster stability crucially depends on receptor-ligand distance. We introduce a one-step master equation which incorporates the effect of cooperative binding through a finite number of polymeric ligand tethers. We also derive Fokker-Planck and mean field equations as continuum limits of the master equation. Polymers are modeled either as harmonic springs or as worm-like chains. In both cases, we find bistability between bound and unbound states for intermediate values of receptor-ligand distance and calculate the corresponding switching times. For small cluster sizes, stochastic effects destabilize the clusters at large separation, as shown by a detailed analysis of the stochastic potential resulting from the Fokker-Planck equation. △ Less

Submitted 16 July, 2007; v1 submitted 18 December, 2006; originally announced December 2006.

Comments: final version after minor revisions

Journal ref: Eur. Phys. J. E 22: 123-137 (2007)

Mean first passage times for bond formation for a Brownian particle in linear shear flow above a wall

Authors: C. Korn, U. S. Schwarz

Abstract: Motivated by cell adhesion in hydrodynamic flow, here we study bond formation between a spherical Brownian particle in linear shear flow carrying receptors for ligands covering the boundary wall. We derive the appropriate Langevin equation which includes multiplicative noise due to position-dependent mobility functions resulting from the Stokes equation. We present a numerical scheme which allow… ▽ More Motivated by cell adhesion in hydrodynamic flow, here we study bond formation between a spherical Brownian particle in linear shear flow carrying receptors for ligands covering the boundary wall. We derive the appropriate Langevin equation which includes multiplicative noise due to position-dependent mobility functions resulting from the Stokes equation. We present a numerical scheme which allows to simulate it with high accuracy for all model parameters, including shear rate and three parameters describing receptor geometry (distance, size and height of the receptor patches). In the case of homogeneous coating, the mean first passage time problem can be solved exactly. In the case of position-resolved receptor-ligand binding, we identify different scaling regimes and discuss their biological relevance. △ Less

Submitted 16 July, 2007; v1 submitted 11 October, 2006; originally announced October 2006.

Comments: final version after minor revisions

Journal ref: J. Chem. Phys. 126, 095103 (2007)

Efficiency of initiating cell adhesion in hydrodynamic flow

Authors: C. Korn, U. S. Schwarz

Abstract: We theoretically investigate the efficiency of initial binding between a receptor-coated sphere and a ligand-coated wall in linear shear flow. The mean first passage time for binding decreases monotonically with increasing shear rate. Above a saturation threshold of the order of a few 100 receptor patches, the binding efficiency is enhanced only weakly by increasing their number and size, but st… ▽ More We theoretically investigate the efficiency of initial binding between a receptor-coated sphere and a ligand-coated wall in linear shear flow. The mean first passage time for binding decreases monotonically with increasing shear rate. Above a saturation threshold of the order of a few 100 receptor patches, the binding efficiency is enhanced only weakly by increasing their number and size, but strongly by increasing their height. This explains why white blood cells in the blood flow adhere through receptor patches localized to the tips of microvilli, and why malaria-infected red blood cells form elevated receptor patches (knobs). △ Less

Submitted 5 September, 2006; originally announced September 2006.

Comments: 4 pages, Revtex, 4 Postscript figures included, to appear in PRL

Journal ref: Phys. Rev. Lett. 97:138103 (2006)

Collective effects in cellular structure formation mediated by compliant environments: a Monte Carlo study

Authors: I. B. Bischofs, U. S. Schwarz

Abstract: Compliant environments can mediate interactions between mechanically active cells like fibroblasts. Starting with a phenomenological model for the behaviour of single cells, we use extensive Monte Carlo simulations to predict non-trivial structure formation for cell communities on soft elastic substrates as a function of elastic moduli, cell density, noise and cell position geometry. In general,… ▽ More Compliant environments can mediate interactions between mechanically active cells like fibroblasts. Starting with a phenomenological model for the behaviour of single cells, we use extensive Monte Carlo simulations to predict non-trivial structure formation for cell communities on soft elastic substrates as a function of elastic moduli, cell density, noise and cell position geometry. In general, we find a disordered structure as well as ordered string-like and ring-like structures. The transition between ordered and disordered structures is controlled both by cell density and noise level, while the transition between string- and ring-like ordered structures is controlled by the Poisson ratio. Similar effects are observed in three dimensions. Our results suggest that in regard to elastic effects, healthy connective tissue usually is in a macroscopically disordered state, but can be switched to a macroscopically ordered state by appropriate parameter variations, in a way that is reminiscent of wound contraction or diseased states like contracture. △ Less

Submitted 16 January, 2006; v1 submitted 14 October, 2005; originally announced October 2005.

Comments: 45 pages, 7 postscript figures included, revised version accepted for publication in Acta Biomaterialia

Journal ref: Acta Biomaterialia 2: 253-265 (2006)

Effect of Poisson ratio on cellular structure formation

Authors: Ilka B. Bischofs, Ulrich S. Schwarz

Abstract: Mechanically active cells in soft media act as force dipoles. The resulting elastic interactions are long-ranged and favor the formation of strings. We show analytically that due to screening, the effective interaction between strings decays exponentially, with a decay length determined only by geometry. Both for disordered and ordered arrangements of cells, we predict novel phase transitions fr… ▽ More Mechanically active cells in soft media act as force dipoles. The resulting elastic interactions are long-ranged and favor the formation of strings. We show analytically that due to screening, the effective interaction between strings decays exponentially, with a decay length determined only by geometry. Both for disordered and ordered arrangements of cells, we predict novel phase transitions from paraelastic to ferroelastic and anti-ferroelastic phases as a function of Poisson ratio. △ Less

Submitted 5 April, 2005; originally announced April 2005.

Comments: 4 pages, Revtex, 4 Postscript figures included

Journal ref: Phys. Rev. Lett. 95: 068102 (2005)