-
Aharonov-Bohm and Altshuler-Aronov-Spivak oscillations in the quasi-ballistic regime in phase-pure GaAs/InAs core/shell nanowires
Authors:
Farah Basarić,
Vladan Brajović,
Gerrit Behner,
Kristof Moors,
William Schaarman,
Andrei Manolescu,
Raghavendra Juluri,
Ana M. Sanchez,
Jin Hee Bae,
Hans Lüth,
Detlev Grützmacher,
Alexander Pawlis,
Thomas Schäpers
Abstract:
The realization of various qubit systems based on high-quality hybrid superconducting quantum devices, is often achieved using semiconductor nanowires. For such hybrid devices, a good coupling between the superconductor and the conducting states in the semiconductor wire is crucial. GaAs/InAs core/shell nanowires with an insulating core, and a conductive InAs shell fulfill this requirement, since…
▽ More
The realization of various qubit systems based on high-quality hybrid superconducting quantum devices, is often achieved using semiconductor nanowires. For such hybrid devices, a good coupling between the superconductor and the conducting states in the semiconductor wire is crucial. GaAs/InAs core/shell nanowires with an insulating core, and a conductive InAs shell fulfill this requirement, since the electronic states are strongly confined near the surface. However, maintaining a good crystal quality in the conducting shell is a challenge for this type of nanowire. In this work, we present phase-pure zincblende GaAs/InAs core/shell nanowires and analyze their low-temperature magnetotransport properties. We observe pronounced magnetic flux quantum periodic oscillations, which can be attributed to a combination of Aharonov-Bohm and Altshuler-Aronov-Spivak oscillations. From the gate and temperature dependence of the conductance oscillations, as well as from supporting theoretical transport calculations, we conclude that the conducting states in the shell are in the quasi-ballistic transport regime, with few scattering centers, but nevertheless leading to an Altshuler-Aronov-Spivak correction that dominates at small magnetic field strengths. Our results demonstrate that phase-pure zincblende GaAs/InAs core/shell nanowires represent a very promising alternative semiconductor nanowire-based platform for hybrid quantum devices.
△ Less
Submitted 9 March, 2025;
originally announced March 2025.
-
Structural and optical changes induced by incorporation of antimony into InAs/GaAs(001) quantum dots
Authors:
A. G. Taboada,
A. M. Sánchez,
A. M. Beltrán,
M. Bozkurt,
D. Alonso-Álvarez,
B. Alén,
A. Rivera,
J. M. Ripalda,
J. M. Llorens,
J. Martín-Sánchez,
Y. González,
J. M. Ulloa,
J. M. García,
S. I. Molina,
P. M. Koenraad
Abstract:
We present experimental evidence of Sb incorporation inside InAs/GaA(001) quantum dots exposed to an antimony flux immediately before capping with GaAs. The Sb composition profile inside the nanostructures as measured by cross-sectional scanning tunneling and electron transmission microscopies show two differentiated regions within the quantum dots, with an Sb rich alloy at the tip of the quantum…
▽ More
We present experimental evidence of Sb incorporation inside InAs/GaA(001) quantum dots exposed to an antimony flux immediately before capping with GaAs. The Sb composition profile inside the nanostructures as measured by cross-sectional scanning tunneling and electron transmission microscopies show two differentiated regions within the quantum dots, with an Sb rich alloy at the tip of the quantum dots. Atomic force microscopy and transmission electron microscopy micrographs show increased quantum-dot height with Sb flux exposure. The evolution of the reflection high-energy electron-diffraction pattern suggests that the increased height is due to changes in the quantum-dot capping process related to the presence of segregated Sb atoms. These structural and compositional changes result in a shift of the room-temperature photoluminescence emission from 1.26 to 1.36 microns accompanied by an order of magnitude increase in the room-temperature quantum-dot luminescence intensity.
△ Less
Submitted 23 January, 2025;
originally announced January 2025.
-
Low-temperature fabrication of amorphous carbon films as a universal template for remote epitaxy
Authors:
T. Henksmeier,
P. Mahler,
A. Wolff,
D. Deutsch,
M. Voigt,
L. Ruhm,
A. M. Sanchez,
D. J. As,
G. Grundmeier,
D. Reuter
Abstract:
We report on the low-temperature fabrication (300$°$C) of ultrathin 2D amorphous carbon layers on III-V semiconductors by plasma-enhanced chemical vapor deposition as a universal template for remote epitaxy. We present growth and detailed characterization of 2D amorphous carbon layers on various host substrates and their subsequent remote epitaxial overgrowth by solid-source molecular beam epitaxy…
▽ More
We report on the low-temperature fabrication (300$°$C) of ultrathin 2D amorphous carbon layers on III-V semiconductors by plasma-enhanced chemical vapor deposition as a universal template for remote epitaxy. We present growth and detailed characterization of 2D amorphous carbon layers on various host substrates and their subsequent remote epitaxial overgrowth by solid-source molecular beam epitaxy. We present the fabrication of ultra-smooth monolayer thick amorphous carbon layers with roughness $\leq 0.3$ nm determined by atomic-force microscopy and X-ray reflectivity measurement. We show that precisely tailoring the carbon layer thickness allows superior tunability of the substrate-layer interaction. Further, X-ray photoelectron and Raman spectroscopy measurements reveal predominantly sp$^2$-hybridised carbon in the amorphous layers. We observe that a low-temperature nucleation step is favorable for nucleation of III-V material growth on substrates coated with thin amorphous carbon layers. Under optimized preparation conditions, we obtain high-quality, single-crystalline, (001)-oriented GaAs, cubic-AlN, cubic-GaN and In(x)Ga(1-x)As, respectively, and various carbon-coated (001)-oriented substrates as GaAs, InP and 3C-SiC. Transmission electron microscopy images of the substrate-carbon-layer interface reveal a stretching of the atomic bonds at the interface and high-resolution X-ray diffraction measurements reveal high crystal quality and low dislocation densities $<1\times 10^7 \text{cm}^{-2}$. Our results show the universality of our carbon deposition process to fabricate templates for remote epitaxy, e. g., for remote epitaxy on temperature sensitive substrates like GaAs or InP and growth of metastable phases. Lift-off of layers from their substrates is demonstrated by employing a Ni stressor.
△ Less
Submitted 20 October, 2024;
originally announced October 2024.
-
Flux-periodic supercurrent oscillations in an Aharonov-Bohm-type nanowire Josephson junction
Authors:
Patrick Zellekens,
Russell S. Deacon,
Farah Basaric,
Raghavendra Juluri,
Michael D. Randle,
Benjamin Bennemann,
Christoph Krause,
Erik Zimmermann,
Ana M. Sanchez,
Detlev Grützmacher,
Alexander Pawlis,
Koji Ishibashi,
Thomas Schäpers
Abstract:
Phase winding effects in hollow semiconductor nanowires with superconducting shells have been proposed as a route to engineer topological superconducting states. We investigate GaAs/InAs core/shell nanowires with half-shells of epitaxial aluminium as a potential platform for such devices, where the thin InAs shell confines the electron wave function around the GaAs core. With normal contacts we ob…
▽ More
Phase winding effects in hollow semiconductor nanowires with superconducting shells have been proposed as a route to engineer topological superconducting states. We investigate GaAs/InAs core/shell nanowires with half-shells of epitaxial aluminium as a potential platform for such devices, where the thin InAs shell confines the electron wave function around the GaAs core. With normal contacts we observed pronounced $h/e$ flux periodic oscillations in the magnetoconductance, indicating the presence of a tubular conductive channel in the InAs shell. Conversely, the switching current in Josephson junctions oscillates with approximately half that period, i.e. $h/2e$, indicating transport via Andreev transport processes in the junction enclosing threading magnetic flux. On these structures, we systematically studied the gate-, field-, and temperature-dependent evolution of the supercurrent. Results indicate that Andreev transport processes can occur about the wire circumference indicating full proximitization of the InAs shell from the half-shell superconducting contacts.
△ Less
Submitted 21 February, 2024;
originally announced February 2024.
-
Bi Incorporation and segregation in the MBE-grown GaAs-(Ga,Al)As-Ga(As,Bi) core-shell nanowires
Authors:
Janusz Sadowski,
Anna Kaleta,
Serhii Kryvyi,
Dorota Janaszko,
Bogusława Kurowska,
Marta Bilska,
Tomasz Wojciechowski,
Jarosław Z. Domagala,
Ana M. Sanchez,
Sławomir Kret
Abstract:
Incorporation of Bi into GaAs-(Ga,Al)As-Ga(As,Bi) core-shell nanowires grown by molecular beam epitaxy is studied with transmission electron microscopy. Nanowires are grown on GaAs(111)B substrates with Au-droplet assisted mode. Bi-doped shells are grown at low temperature (300 °C) with a close to stoichiometric Ga/As flux ratio. At low Bi fluxes, the Ga(As,Bi) shells are smooth, with Bi completel…
▽ More
Incorporation of Bi into GaAs-(Ga,Al)As-Ga(As,Bi) core-shell nanowires grown by molecular beam epitaxy is studied with transmission electron microscopy. Nanowires are grown on GaAs(111)B substrates with Au-droplet assisted mode. Bi-doped shells are grown at low temperature (300 °C) with a close to stoichiometric Ga/As flux ratio. At low Bi fluxes, the Ga(As,Bi) shells are smooth, with Bi completely incorporated into the shells. Higher Bi fluxes (Bi/As flux ratio ~ 4%) led to partial segregation of Bi as droplets on the nanowires sidewalls, preferentially located at the nanowire segments with wurtzite structure. We demonstrate that such Bi droplets on the sidewalls act as catalysts for the growth of branches perpendicular to the GaAs trunks. Due to the tunability between zinc-blende and wurtzite polytypes by changing the nanowire growth conditions, this effect enables fabrication of branched nanowire architectures with branches generated from selected (wurtzite) nanowire segments.
△ Less
Submitted 23 June, 2022;
originally announced June 2022.
-
Te-doped selective-area grown InAs nanowires for superconducting hybrid devices
Authors:
Pujitha Perla,
Anton Faustmann,
Sebastian Koelling,
Patrick Zellekens,
Russell Deacon,
H. Aruni Fonseka,
Jonas Kölzer,
Yuki Sato,
Ana M. Sanchez,
Oussama Moutanabbir,
Koji Ishibashi,
Detlev Grützmacher,
Mihail Ion Lepsa,
Thomas Schäpers
Abstract:
Semiconductor nanowires have emerged as versatile components in superconducting hybrid devices for Majorana physics and quantum computing. The transport properties of nanowires can be tuned either by field-effect or doping. We investigated a series of InAs nanowires which conductivity has been modified by n-type doping using tellurium. In addition to electron microscopy studies, the wires were als…
▽ More
Semiconductor nanowires have emerged as versatile components in superconducting hybrid devices for Majorana physics and quantum computing. The transport properties of nanowires can be tuned either by field-effect or doping. We investigated a series of InAs nanowires which conductivity has been modified by n-type doping using tellurium. In addition to electron microscopy studies, the wires were also examined with atomic probe tomography to obtain information about the local incorporation of Te atoms. It was found that the Te atoms mainly accumulate in the core of the nanowire and at the corners of the {110} side facets. The efficiency of n-type doping was also confirmed by transport measurements. As a demonstrator hybrid device, a Josephson junction was fabricated using a nanowire as a weak link. The corresponding measurements showed a clear increase of the critical current with increase of the dopant concentration.
△ Less
Submitted 18 October, 2021;
originally announced October 2021.
-
Thermally-driven formation of Ge quantum dots on self-catalysed thin GaAs nanowires
Authors:
Yunyan Zhang,
H. Aruni Fonseka,
Hui Yang,
Xuezhe Yu,
Pamela Jurczak,
Suguo Huo,
Ana M. Sanchez,
Huiyun Liu
Abstract:
Embedding quantum dots (QDs) on nanowire (NW) sidewalls allows the integration of multi-layers of QDs into the active region of radial p-i-n junctions to greatly enhance light emission/absorption. However, the surface curvature makes the growth much more challenging compared with growths on thin-films, particularly on NWs with small diameters (Ø <100 nm). Moreover, the {110} sidewall facets of sel…
▽ More
Embedding quantum dots (QDs) on nanowire (NW) sidewalls allows the integration of multi-layers of QDs into the active region of radial p-i-n junctions to greatly enhance light emission/absorption. However, the surface curvature makes the growth much more challenging compared with growths on thin-films, particularly on NWs with small diameters (Ø <100 nm). Moreover, the {110} sidewall facets of self-catalyzed NWs favor two-dimensional growth (2D), with the realization of three-dimensional (3D) Stranski-Krastanow growth becoming extremely challenging. Here, we demonstrate thermally-driven formation of Ge dots on the {110} sidewalls facets of thin self-catalyzed NWs without using any surfactant or surface treatment. The 2D-3D transition of the pseudomorphic Ge layer grown on GaAs NWs is driven by energy minimization under high-temperature annealing. This method opens a new avenue to integrate QDs on NWs without any restriction on NW diameter or elastic strain, which can allow the formation of QDs in a wider range of materials systems where the growth of islands by traditional mechanisms is not possible, with benefits for novel NWQD-based optoelectronic devices.
△ Less
Submitted 31 March, 2021;
originally announced March 2021.
-
Robust Protection of III-V Nanowires in Water Splitting by a Thin Compact TiO$_2$ Layer
Authors:
Fan Cui,
Yunyan Zhang,
H. Aruni Fonseka,
Premrudee Promdet,
Ali Imran Channa,
Mingqing Wang,
Xueming Xia,
Sanjayan Sathasivam,
Hezhuang Liu,
Ivan P. Parkin,
Hui Yang,
Ting Li,
Kwang-Leong Choy,
Jiang Wu,
Chris Blackman,
Ana M. Sanchez,
Huiyun Liu
Abstract:
Narrow-bandgap III-V semiconductor nanowires (NWs) with a suitable band structure and strong light-trapping ability are ideal for high-efficiency low-cost solar water-splitting systems. However, due to their nanoscale dimension, they suffer more severe corrosion by the electrolyte solution than the thin-film counterparts. Thus, short-term durability is the major obstacle for using these NWs for pr…
▽ More
Narrow-bandgap III-V semiconductor nanowires (NWs) with a suitable band structure and strong light-trapping ability are ideal for high-efficiency low-cost solar water-splitting systems. However, due to their nanoscale dimension, they suffer more severe corrosion by the electrolyte solution than the thin-film counterparts. Thus, short-term durability is the major obstacle for using these NWs for practical water splitting applications. Here, we demonstrated for the first time that a thin layer (~7 nm thick) of compact TiO$_2$ deposited by atomic layer deposition can provide robust protection to III-V NWs. The protected GaAs NWs maintain 91.4% of its photoluminescence intensity after 14 months of storage in ambient atmosphere, which suggests the TiO$_2$ layer is pinhole-free. Working as a photocathode for water splitting, they exhibited a 45% larger photocurrent density compared with un-protected counterparts and a high Faraday efficiency of 91%, and can also maintain a record-long highly-stable performance among narrow-bandgap III-V NW photoelectrodes; after 67 hours photoelectrochemical stability test reaction in strong acid electrolyte solution (pH = 1), they show no apparent indication of corrosion, which is in stark contrast to the un-protected NWs that are fully failed after 35-hours. These findings provide an effective way to enhance both stability and performance of III-V NW based photoelectrodes, which are highly important for practical applications in solar-energy-based water splitting systems.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
Fully in-situ InAs nanowire Josephson junctions by selective-area growth and shadow evaporation
Authors:
Pujitha Perla,
H. Aruni Fonseka,
Patrick Zellekens,
Russell Deacon,
Yisong Han,
Jonas Kölzer,
Timm Mörstedt,
Benjamin Bennemann,
Koji Ishibashi,
Detlev Grützmacher,
Ana M. Sanchez,
Mihail Ion Lepsa,
Thomas Schäpers
Abstract:
Josephson junctions based on InAs semiconducting nanowires and Nb superconducting electrodes are fabricated in-situ by a special shadow evaporation scheme for the superconductor electrode. Compared to other metallic superconductors such as Al, Nb has the advantage of a larger superconducting gap which allows operation at higher temperatures and magnetic fields. Our junctions are fabricated by shad…
▽ More
Josephson junctions based on InAs semiconducting nanowires and Nb superconducting electrodes are fabricated in-situ by a special shadow evaporation scheme for the superconductor electrode. Compared to other metallic superconductors such as Al, Nb has the advantage of a larger superconducting gap which allows operation at higher temperatures and magnetic fields. Our junctions are fabricated by shadow evaporation of Nb on pairs of InAs nanowires grown selectively on two adjacent tilted Si (111) facets and crossing each other at a small distance. The upper wire relative to the deposition source acts as a shadow mask determining the gap of the superconducting electrodes on the lower nanowire. Electron microscopy measurements show that the fully in-situ fabrication method gives a clean InAs/Nb interface. A clear Josephson supercurrent is observed in the current-voltage characteristics, which can be controlled by a bottom gate. The excess current of 0.68 indicates a high junction transparency. Under microwave radiation, pronounced integer Shapiro steps are observed suggesting a sinusoidal current-phase relation. Owing to the large critical field of Nb, the Josephson supercurrent can be maintained to magnetic fields exceeding 1 T. Our results show that in-situ prepared Nb/InAs nanowire contacts are very interesting candidates for superconducting quantum circuits requiring large magnetic fields.
△ Less
Submitted 12 November, 2020;
originally announced November 2020.
-
Atomic and electronic structure of two-dimensional Mo(1-x)WxS2 alloys
Authors:
Xue Xia,
Siow Mean Loh,
Jacob Viner,
Natalie C. Teutsch,
Abigail J. Graham,
Viktor Kandyba,
Alexei Barinov,
Ana M. Sanchez,
David C. Smith,
Nicholas D. M. Hine,
Neil R. Wilson
Abstract:
Alloying enables engineering of the electronic structure of semiconductors for optoelectronic applications. Due to their similar lattice parameters, the two-dimensional semiconducting transition metal dichalcogenides of the MoWSeS group (MX2 where M= Mo or W and X=S or Se) can be grown as high-quality materials with low defect concentrations. Here we investigate the atomic and electronic structure…
▽ More
Alloying enables engineering of the electronic structure of semiconductors for optoelectronic applications. Due to their similar lattice parameters, the two-dimensional semiconducting transition metal dichalcogenides of the MoWSeS group (MX2 where M= Mo or W and X=S or Se) can be grown as high-quality materials with low defect concentrations. Here we investigate the atomic and electronic structure of Mo(1-x)WxS2 alloys using a combination of high-resolution experimental techniques and simulations. Analysis of the Mo and W atomic positions in these alloys, grown by chemical vapour transport, shows that they are randomly distributed, consistent with Monte Carlo simulations that use interaction energies determined from first-principles calculations. Electronic structure parameters are directly determined from angle resolved photoemission spectroscopy measurements. These show that the spin-orbit splitting at the valence band edge increases linearly with W content from MoS2 to WS2, in agreement with linear-scaling density functional theory (LS-DFT) predictions. The spin-orbit splitting at the conduction band edge is predicted to reduce to zero at intermediate compositions. Despite this, polarisation-resolved photoluminescence spectra on monolayer Mo0.5W0.5S2 show significant circular dichroism, indicating that spin-valley locking is retained. These results demonstrate that alloying is an important tool for controlling the electronic structure of MX2 for spintronic and valleytronic applications.
△ Less
Submitted 10 September, 2020;
originally announced September 2020.
-
Hard-gap spectroscopy in a self-defined mesoscopic InAs/Al nanowire Josephson junction
Authors:
Patrick Zellekens,
Russell Deacon,
Pujitha Perla,
H. Aruni Fonseka,
Timm Moerstedt,
Steven A. Hindmarsh,
Benjamin Bennemann,
Florian Lentz,
Mihail Ion Lepsa,
Ana M. Sanchez,
Detlev Grützmacher,
Koji Ishibashi,
Thomas Schäpers
Abstract:
Superconductor/semiconductor-nanowire hybrid structures can serve as versatile building blocks to realize Majorana circuits or superconducting qubits based on quantized levels such as Andreev qubits. For all these applications it is essential that the superconductor-semiconductor interface is as clean as possible. Furthermore, the shape and dimensions of the superconducting electrodes needs to be…
▽ More
Superconductor/semiconductor-nanowire hybrid structures can serve as versatile building blocks to realize Majorana circuits or superconducting qubits based on quantized levels such as Andreev qubits. For all these applications it is essential that the superconductor-semiconductor interface is as clean as possible. Furthermore, the shape and dimensions of the superconducting electrodes needs to be precisely controlled. We fabricated self-defined InAs/Al core/shell nanowire junctions by a fully in-situ approach, which meet all these criteria. Transmission electron microscopy measurements confirm the sharp and clean interface between the nanowire and the in-situ deposited Al electrodes which were formed by means of shadow evaporation. Furthermore, we report on tunnel spectroscopy, gate and magnetic field-dependent transport measurements. The achievable short junction lengths,the observed hard-gap and the magnetic field robustness make this new hybrid structure very attractive for applications which rely on a precise control of the number of sub-gap states, like Andreev qubits or topological systems.
△ Less
Submitted 29 July, 2020; v1 submitted 21 April, 2020;
originally announced April 2020.
-
Defect-Free Axially-Stacked GaAs/GaAsP Nanowire Quantum Dots with Strong Carrier Confinement
Authors:
Yunyan Zhang,
Anton V. Velichko,
H. Aruni Fonseka,
Patrick Parkinson,
George Davis,
James A. Gott,
Martin Aagesen,
Ana M. Sanchez,
David Mowbray,
Huiyun Liu
Abstract:
Axially-stacked quantum dots (QDs) in nanowires (NWs) have important applications in fabricating nanoscale quantum devices and lasers. Although their performances are very sensitive to crystal quality and structures, there is relatively little study on defect-free growth with Au-free mode and structure optimisation for achiving high performances. Here, we report a detailed study of the first self-…
▽ More
Axially-stacked quantum dots (QDs) in nanowires (NWs) have important applications in fabricating nanoscale quantum devices and lasers. Although their performances are very sensitive to crystal quality and structures, there is relatively little study on defect-free growth with Au-free mode and structure optimisation for achiving high performances. Here, we report a detailed study of the first self-catalyzed defect-free axially-stacked deep NWQDs. High structural quality is maintained when 50 GaAs QDs are placed in a single GaAsP NW. The QDs have very sharp interfaces (1.8~3.6 nm) and can be closely stacked with very similar structural properties. They exhibit the deepest carrier confinement (~90 meV) and largest exciton-biexciton splitting (~11 meV) among non-nitride III-V NWQDs, and can maintain good optical properties after being stored in ambient atmosphere for over 6 months due to excellent stability. Our study sets a solid foundation to build high-performance axially-stacked NWQD devices that are compatible with CMOS technologies.
△ Less
Submitted 25 February, 2021; v1 submitted 4 February, 2020;
originally announced February 2020.
-
Enhanced superconductivity in few-layer TaS$_2$ due to healing by oxygenation
Authors:
J. Bekaert,
E. Khestanova,
D. G. Hopkinson,
J. Birkbeck,
N. Clark,
M. Zhu,
D. A. Bandurin,
R. Gorbachev,
S. Fairclough,
Y. Zou,
M. Hamer,
D. J. Terry,
J. J. P. Peters,
A. M. Sanchez,
B. Partoens,
S. J. Haigh,
M. V. Milošević,
I. V. Grigorieva
Abstract:
When approaching the atomically thin limit, defects and disorder play an increasingly important role in the properties of two-dimensional materials. Superconductivity is generally thought to be vulnerable to these effects, but here we demonstrate the contrary in the case of oxygenation of ultrathin tantalum disulfide (TaS$_2$). Our first-principles calculations show that incorporation of oxygen in…
▽ More
When approaching the atomically thin limit, defects and disorder play an increasingly important role in the properties of two-dimensional materials. Superconductivity is generally thought to be vulnerable to these effects, but here we demonstrate the contrary in the case of oxygenation of ultrathin tantalum disulfide (TaS$_2$). Our first-principles calculations show that incorporation of oxygen into the TaS$_2$ crystal lattice is energetically favourable and effectively heals sulfur vacancies typically present in these crystals, thus restoring the carrier density to the intrinsic value of TaS$_2$. Strikingly, this leads to a strong enhancement of the electron-phonon coupling, by up to 80% in the highly-oxygenated limit. Using transport measurements on fresh and aged (oxygenated) few-layer TaS$_2$, we found a marked increase of the superconducting critical temperature ($T_{\mathrm{c}}$) upon aging, in agreement with our theory, while concurrent electron microscopy and electron-energy loss spectroscopy confirmed the presence of sulfur vacancies in freshly prepared TaS$_2$ and incorporation of oxygen into the crystal lattice with time. Our work thus reveals the mechanism by which certain atomic-scale defects can be beneficial to superconductivity and opens a new route to engineer $T_{\mathrm{c}}$ in ultrathin materials.
△ Less
Submitted 16 December, 2019;
originally announced December 2019.
-
Quantum oscillation and unusual protection mechanism of the surface state in nonsymmorphic semimetals
Authors:
Xue Liu,
Chunlei Yue,
Sergey V. Erohin,
Yanglin Zhu,
Abin Joshy,
Jinyu Liu,
Ana M Sanchez,
David Graf,
Pavel B. Sorokin,
Zhiqiang Mao,
Jin Hu,
Jiang Wei
Abstract:
In a topological semimetal with Dirac or Weyl points, the bulk edge correspondence principle predicts a gapless edge mode if the essential symmetry is still preserved at the surface. The detection of such topological surface state has been considered as the fingerprint prove for crystals with nontrivial topological bulk band. On the contrary, it has been proposed that even with symmetry broken at…
▽ More
In a topological semimetal with Dirac or Weyl points, the bulk edge correspondence principle predicts a gapless edge mode if the essential symmetry is still preserved at the surface. The detection of such topological surface state has been considered as the fingerprint prove for crystals with nontrivial topological bulk band. On the contrary, it has been proposed that even with symmetry broken at the surface, a new surface band can emerge in nonsymmorphic topological semimetals. The symmetry reduction at the surface lifts the bulk band degeneracies, produces an unusual floating surface band with trivial topology. Here, we report quantum transport probing to ZrSiSe thin flakes and reveal transport signatures of this new surface state. Remarkably, though topologically trivial, such a surface band exhibit substantial two dimensional Shubnikov de Haas quantum oscillations with high mobility, which signifies a new protection mechanism and may open applications for surface-related devices.
△ Less
Submitted 16 June, 2020; v1 submitted 15 November, 2019;
originally announced November 2019.
-
High yield production of ultrathin fibroid semiconducting nanowire of Ta$_2$Pd$_3$Se$_8$
Authors:
Xue Liu,
Sheng Liu,
Liubov Yu. Antipina,
Yibo Zhu,
Jinliang Ning,
Jinyu Liu,
Chunlei Yue,
Abin Joshy,
Yu Zhu,
Jianwei Sun,
Ana M Sanchez,
Pavel B. Sorokin,
Zhiqiang Mao,
Qihua Xiong,
Jiang Wei
Abstract:
Immediately after the demonstration of the high-quality electronic properties in various two dimensional (2D) van der Waals (vdW) crystals fabricated with mechanical exfoliation, many methods have been reported to explore and control large scale fabrications. Comparing with recent advancements in fabricating 2D atomic layered crystals, large scale production of one dimensional (1D) nanowires with…
▽ More
Immediately after the demonstration of the high-quality electronic properties in various two dimensional (2D) van der Waals (vdW) crystals fabricated with mechanical exfoliation, many methods have been reported to explore and control large scale fabrications. Comparing with recent advancements in fabricating 2D atomic layered crystals, large scale production of one dimensional (1D) nanowires with thickness approaching molecular or atomic level still remains stagnant. Here, we demonstrate the high yield production of a 1D vdW material, semiconducting Ta2Pd3Se8 nanowires, by means of liquid-phase exfoliation. The thinnest nanowire we have readily achieved is around 1 nm, corresponding to a bundle of one or two molecular ribbons. Transmission electron microscopy and transport measurements reveal the as-fabricated Ta2Pd3Se8 nanowires exhibit unexpected high crystallinity and chemical stability. Our low frequency Raman spectroscopy reveals clear evidence of the existing of weak inter-ribbon bindings. The fabricated nanowire transistors exhibit high switching performance and promising applications for photodetectors.
△ Less
Submitted 15 November, 2019;
originally announced November 2019.
-
High-Responsivity Photodetection by Self-Catalyzed Phase-Pure P-GaAs Nanowire
Authors:
Hassan Ali,
Yunyan Zhang,
Jing Tang,
Kai Peng,
Sibai Sun,
Yue Sun,
Feilong Song,
Attia Falak,
Shiyao Wu,
Chenjiang Qian,
Meng Wang,
Zhanchun Zuo,
Kui-Juan Jin,
Ana M. Sanchez,
Huiyun Liu,
Xiulai Xu
Abstract:
Defects are detrimental for optoelectronics devices, such as stacking faults can form carrier-transportation barriers, and foreign impurities (Au) with deep-energy levels can form carrier traps and non-radiative recombination centers. Here, we first developed self-catalyzed p-type GaAs nanowires (NWs) with pure zinc blende (ZB) structure, and then fabricated photodetector made by these NWs. Due to…
▽ More
Defects are detrimental for optoelectronics devices, such as stacking faults can form carrier-transportation barriers, and foreign impurities (Au) with deep-energy levels can form carrier traps and non-radiative recombination centers. Here, we first developed self-catalyzed p-type GaAs nanowires (NWs) with pure zinc blende (ZB) structure, and then fabricated photodetector made by these NWs. Due to absence of stacking faults and suppression of large amount of defects with deep energy levels, the photodetector exhibits room-temperature high photo responsivity of 1.45 x 105 A W^-1 and excellent specific detectivity (D*) up to 1.48 x 10^14 Jones for low-intensity light signal of wavelength 632.8 nm, which outperforms previously reported NW-based photodetectors. These results demonstrate that these self-catalyzed pure-ZB GaAs NWs to be promising candidates for optoelectronics applications.
△ Less
Submitted 19 April, 2018;
originally announced April 2018.
-
MOVPE growth, transmission electron microscopy and magneto-optical spectroscopy of individual InAsP/GaInP quantum dots
Authors:
O. Del Pozo-Zamudio,
J. Puebla,
A. B. Krysa,
R. Toro,
A. M. Sanchez,
R. Beanland,
A. I. Tartakovskii,
M. S. Skolnick,
E. A. Chekhovich
Abstract:
We report on growth and characterization of individual InAsP/GaInP quantum dots with variable nominal As molar fraction. Magneto-photoluminescence experiments reveal QD emission in a wide range from 1.3 to 1.8 eV confirming incorporation of As into quantum dots. Transmission electron microscopy reveals a core-cap structure of InAsP quantum dots with an InAs-rich core capped by an InP-rich layer. I…
▽ More
We report on growth and characterization of individual InAsP/GaInP quantum dots with variable nominal As molar fraction. Magneto-photoluminescence experiments reveal QD emission in a wide range from 1.3 to 1.8 eV confirming incorporation of As into quantum dots. Transmission electron microscopy reveals a core-cap structure of InAsP quantum dots with an InAs-rich core capped by an InP-rich layer. Inside the core, an As molar fraction up to x=0.12 is observed. The heavy hole g-factor is found to be strongly dependent on As molar fraction, while the electron g-factor is close to the InP values. This suggests type-II carrier confinement in the studied InAsP dots with holes (electrons) localized in the core (cap) region. Finally, dynamic nuclear polarization is observed which allows for further insight into structural properties using nuclear magnetic resonance.
△ Less
Submitted 5 May, 2017;
originally announced May 2017.
-
Nanomaterials of the topological crystalline insulators, Pb_(1-x)Sn_(x)Te and Pb_(1-x)Sn_(x)Se
Authors:
M Saghir,
A. M. Sanchez,
S. A. Hindmarsh,
S. J. York,
G. Balakrishnan
Abstract:
Topological insulators (TIs) and topological crystal insulators (TCIs) exhibit exotic surface properties. We present optimised growth procedures to obtain high quality bulk crystals of the TCIs Pb_(1-x)Sn_(x)Te and Pb_(1-x)Sn_(x)Se, and nanowires from the bulk crystals using the vapour-liquid-solid (VLS) technique. Nanowires of Pb_(1-x)Sn_(x)Te have been produced with a Sn composition of approx. x…
▽ More
Topological insulators (TIs) and topological crystal insulators (TCIs) exhibit exotic surface properties. We present optimised growth procedures to obtain high quality bulk crystals of the TCIs Pb_(1-x)Sn_(x)Te and Pb_(1-x)Sn_(x)Se, and nanowires from the bulk crystals using the vapour-liquid-solid (VLS) technique. Nanowires of Pb_(1-x)Sn_(x)Te have been produced with a Sn composition of approx. x = 0.25, at which a transition from trivial to non-trivial insulator is reported. The results obtained on the growth of nanomaterials of Pb_(1-x)Sn_(x)Se are also described. Detailed characterisation of the bulk crystals and the nanomaterials through x-ray diffraction, microscopy techniques and EDX analysis are presented.
△ Less
Submitted 20 November, 2015;
originally announced November 2015.
-
Artefacts in geometric phase analysis of compound materials
Authors:
Jonathan J. P. Petersa,
Richard Beanland,
Marin Alexe,
John W. Cockburn,
Dmitry G. Revin,
Shiyong Y. Zhang,
Ana M. Sanchez
Abstract:
The geometric phase analysis (GPA) algorithm is known as a robust and straightforward technique that can be used to measure lattice strains in high resolution transmission electron microscope (TEM) images. It is also attractive for analysis of aberration-corrected scanning TEM (ac-STEM) images that resolve every atom column, since it uses Fourier transforms and does not require real-space peak det…
▽ More
The geometric phase analysis (GPA) algorithm is known as a robust and straightforward technique that can be used to measure lattice strains in high resolution transmission electron microscope (TEM) images. It is also attractive for analysis of aberration-corrected scanning TEM (ac-STEM) images that resolve every atom column, since it uses Fourier transforms and does not require real-space peak detection and assignment to appropriate sublattices. Here it is demonstrated that in ac-STEM images of compound materials (i.e. with more than one atom per unit cell) an additional phase is present in the Fourier transform. If the structure changes from one area to another in the image (e.g. across an interface), the change in this additional phase will appear as a strain in conventional GPA, even if there is no lattice strain. Strategies to avoid this pitfall are outlined.
△ Less
Submitted 23 April, 2015;
originally announced April 2015.
-
Design rules for dislocation filters
Authors:
Tom Ward,
Ana M. Sánchez,
Mingchu Tang,
Jiang Wu,
Huiyun Liu,
David J. Dunstan,
Richard Beanland
Abstract:
The efficacy of strained layer threading dislocation filter structures in single crystal epitaxial layers is evaluated using numerical modeling for (001) face-centred cubic materials, such as GaAs or Si(1-x)Ge(x), and (0001) hexagonal materials such as GaN. We find that threading dislocation densities decay exponentially as a function of the strain relieved, irrespective of the fraction of threadi…
▽ More
The efficacy of strained layer threading dislocation filter structures in single crystal epitaxial layers is evaluated using numerical modeling for (001) face-centred cubic materials, such as GaAs or Si(1-x)Ge(x), and (0001) hexagonal materials such as GaN. We find that threading dislocation densities decay exponentially as a function of the strain relieved, irrespective of the fraction of threading dislocations that are mobile. Reactions between threading dislocations tend to produce a population that is a balanced mixture of mobile and sessile in (001) cubic materials. In contrast, mobile threading dislocations tend to be lost very rapidly in (0001) GaN, often with little or no reduction in the immobile dislocation density. The capture radius for threading dislocation interactions is estimated to be approx. 40nm using cross section transmission electron microscopy of dislocation filtering structures in GaAs monolithically grown on Si. We find that the minimum threading dislocation density that can be obtained in any given structure is likely to be limited by kinetic effects to approx. 1.0e+04 to 1.0e+05 per square cm.
△ Less
Submitted 13 July, 2014;
originally announced July 2014.
-
Lateral heterojunctions within monolayer semiconductors
Authors:
Chunming Huang,
Sanfeng Wu,
Ana M. Sanchez,
Jonathan J. P. Peters,
Richard Beanland,
Jason S. Ross,
Pasqual Rivera,
Wang Yao,
David H. Cobden,
Xiaodong Xu
Abstract:
Heterojunctions between three-dimensional (3D) semiconductors with different bandgaps are the basis of modern light-emitting diodes, diode lasers, and high-speed transistors. Creating analogous heterojunctions between different two-dimensional (2D) semiconductors would enable band engineering within the 2D plane and open up new realms in materials science, device physics and engineering. Here we d…
▽ More
Heterojunctions between three-dimensional (3D) semiconductors with different bandgaps are the basis of modern light-emitting diodes, diode lasers, and high-speed transistors. Creating analogous heterojunctions between different two-dimensional (2D) semiconductors would enable band engineering within the 2D plane and open up new realms in materials science, device physics and engineering. Here we demonstrate that seamless high-quality in-plane heterojunctions can be grown between the 2D monolayer semiconductors MoSe2 and WSe2. The junctions, grown by lateral hetero-epitaxy using physical vapor transport, are visible in an optical microscope and show enhanced photoluminescence. Atomically resolved transmission electron microscopy reveals that their structure is an undistorted honeycomb lattice in which substitution of one transition metal by another occurs across the interface. The growth of such lateral junctions will allow new device functionalities, such as in-plane transistors and diodes, to be integrated within a single atomically thin layer.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
-
III-V quantum light source and cavity-QED on Silicon
Authors:
Isaac J. Luxmoore,
Romain Toro,
Osvaldo Del Pozo-Zamudio,
Nicholas A. Wasley,
Evgeny A. Chekhovich,
Ana M. Sanchez,
Richard Beanland,
A. Mark Fox,
Maurice S. Skolnick,
Huiyun Y. Liu,
Alexander I. Tartakovskii
Abstract:
Non-classical light sources offer a myriad of possibilities in fundamental science and applications including quantum cryptography and quantum lithography. Single photons can encode quantum information and multi-qubit gates in silica waveguide circuits have been used to demonstrate linear optical quantum computing. Scale-up requires miniaturisation of the waveguide circuit and multiple photon sour…
▽ More
Non-classical light sources offer a myriad of possibilities in fundamental science and applications including quantum cryptography and quantum lithography. Single photons can encode quantum information and multi-qubit gates in silica waveguide circuits have been used to demonstrate linear optical quantum computing. Scale-up requires miniaturisation of the waveguide circuit and multiple photon sources. Silicon photonics, driven by the incentive of optical interconnects, is a highly promising platform for the passive components, but integrated light sources are limited by silicon's indirect band-gap. III-V semiconductor quantum-dots, on the other hand, are proven quantum emitters. Here we demonstrate single-photon emission from quantum-dots coupled to photonic crystal nanocavities fabricated from III-V material grown directly on silicon substrates. The high quality of the III-V material and photonic structures is emphasized by observation of the strong-coupling regime. This work opens-up the advantages of silicon photonics to the integration and scale-up of solid-state quantum optical systems.
△ Less
Submitted 22 November, 2012;
originally announced November 2012.
-
High resolution nuclear magnetic resonance spectroscopy of highly-strained quantum dot nanostructures
Authors:
E. A. Chekhovich,
K. V. Kavokin,
J. Puebla,
A. B. Krysa,
M. Hopkinson,
A. D. Andreev,
A. M. Sanchez,
R. Beanland,
M. S. Skolnick,
A. I. Tartakovskii
Abstract:
Much new solid state technology for single-photon sources, detectors, photovoltaics and quantum computation relies on the fabrication of strained semiconductor nanostructures. Successful development of these devices depends strongly on techniques allowing structural analysis on the nanometer scale. However, commonly used microscopy methods are destructive, leading to the loss of the important link…
▽ More
Much new solid state technology for single-photon sources, detectors, photovoltaics and quantum computation relies on the fabrication of strained semiconductor nanostructures. Successful development of these devices depends strongly on techniques allowing structural analysis on the nanometer scale. However, commonly used microscopy methods are destructive, leading to the loss of the important link between the obtained structural information and the electronic and optical properties of the device. Alternative non-invasive techniques such as optically detected nuclear magnetic resonance (ODNMR) so far proved difficult in semiconductor nano-structures due to significant strain-induced quadrupole broadening of the NMR spectra. Here, we develop new high sensitivity techniques that move ODNMR to a new regime, allowing high resolution spectroscopy of as few as 100000 quadrupole nuclear spins. By applying these techniques to individual strained self-assembled quantum dots, we measure strain distribution and chemical composition in the volume occupied by the confined electron. Furthermore, strain-induced spectral broadening is found to lead to suppression of nuclear spin magnetization fluctuations thus extending spin coherence times. The new ODNMR methods have potential to be applied for non-invasive investigations of a wide range of materials beyond single nano-structures, as well as address the task of understanding and control of nuclear spins on the nanoscale, one of the central problems in quantum information processing.
△ Less
Submitted 17 December, 2011;
originally announced December 2011.
-
Cubic MnSb: epitaxial growth of a predicted room temperature half-metal
Authors:
James D. Aldous,
Christopher W. Burrows,
Ana M. Sánchez,
Richard Beanland,
Ian Maskery,
Matthew K. Bradley,
Manuel dos Santos Dias,
Julie B. Staunton,
Gavin R. Bell
Abstract:
Epitaxial films including bulk-like cubic and wurtzite polymorphs of MnSb have been grown by molecular beam epitaxy on GaAs via careful control of the Sb4/Mn flux ratio. Nonzero-temperature density functional theory was used to predict ab initio the spin polarization as a function of reduced magnetization for the half-metals NiMnSb and cubic MnSb. In both cases, half-metallicity is lost at a thres…
▽ More
Epitaxial films including bulk-like cubic and wurtzite polymorphs of MnSb have been grown by molecular beam epitaxy on GaAs via careful control of the Sb4/Mn flux ratio. Nonzero-temperature density functional theory was used to predict ab initio the spin polarization as a function of reduced magnetization for the half-metals NiMnSb and cubic MnSb. In both cases, half-metallicity is lost at a threshold magnetization reduction, corresponding to a temperature T*< Tc. This threshold is far higher for cubic MnSb compared to NiMnSb and corresponds to T* > 350K, making epitaxial cubic MnSb a promising candidate for room temperature spin injection into semiconductors.
△ Less
Submitted 30 September, 2011;
originally announced September 2011.
