-
From the stress response function (back) to the sandpile `dip'
Authors:
A. P. F. Atman,
P. Brunet,
J. Geng,
G. Reydellet,
P. Claudin,
R. P. Behringer,
E. Clément
Abstract:
We relate the pressure `dip' observed at the bottom of a sandpile prepared by successive avalanches to the stress profile obtained on sheared granular layers in response to a localized vertical overload. We show that, within a simple anisotropic elastic analysis, the skewness and the tilt of the response profile caused by shearing provide a qualitative agreement with the sandpile dip effect. We…
▽ More
We relate the pressure `dip' observed at the bottom of a sandpile prepared by successive avalanches to the stress profile obtained on sheared granular layers in response to a localized vertical overload. We show that, within a simple anisotropic elastic analysis, the skewness and the tilt of the response profile caused by shearing provide a qualitative agreement with the sandpile dip effect. We conclude that the texture anisotropy produced by the avalanches is in essence similar to that induced by a simple shearing -- albeit tilted by the angle of repose of the pile. This work also shows that this response function technique could be very well adapted to probe the texture of static granular packing.
△ Less
Submitted 15 March, 2005; v1 submitted 6 January, 2005;
originally announced January 2005.
-
Sensitivity of the stress response function to packing preparation
Authors:
A. P. F. Atman,
P. Brunet,
J. Geng,
G. Reydellet,
G. Combe,
P. Claudin,
R. P. Behringer,
E. Clément
Abstract:
A granular assembly composed of a collection of identical grains may pack under different microscopic configurations with microscopic features that are sensitive to the preparation history. A given configuration may also change in response to external actions such as compression, shearing etc. We show using a mechanical response function method developed experimentally and numerically, that the…
▽ More
A granular assembly composed of a collection of identical grains may pack under different microscopic configurations with microscopic features that are sensitive to the preparation history. A given configuration may also change in response to external actions such as compression, shearing etc. We show using a mechanical response function method developed experimentally and numerically, that the macroscopic stress profiles are strongly dependent on these preparation procedures. These results were obtained for both two and three dimensions. The method reveals that, under a given preparation history, the macroscopic symmetries of the granular material is affected and in most cases significant departures from isotropy should be observed. This suggests a new path toward a non-intrusive test of granular material constitutive properties.
△ Less
Submitted 14 April, 2005; v1 submitted 29 November, 2004;
originally announced November 2004.
-
Experiments in randomly agitated granular assemblies close to the jamming transition
Authors:
G. Caballero,
A. Lindner,
G. Ovarlez,
G. Reydellet,
J. Lanuza,
E. Clement
Abstract:
We present here the preliminary results obtained for two experiments on randomly agitated granular assemblies using a novel way of shaking. First we discuss the transport properties of a 2D model system undergoing classical shaking that show the importance of large scale dynamics for this type of agitation and offer a local view of the microscopic motions of a grain. We then develop a new way of…
▽ More
We present here the preliminary results obtained for two experiments on randomly agitated granular assemblies using a novel way of shaking. First we discuss the transport properties of a 2D model system undergoing classical shaking that show the importance of large scale dynamics for this type of agitation and offer a local view of the microscopic motions of a grain. We then develop a new way of vibrating the system allowing for random accelerations smaller than gravity. Using this method we study the evolution of the free surface as well as results from a light scattering method for a 3D model system. The final aim of these experiments is to investigate the ideas of effective temperature on the one hand as a function of inherent states and on the other hand using fluctuation dissipation relations.
△ Less
Submitted 24 March, 2004;
originally announced March 2004.
-
Green's Function Measurements of Force Transmission in 2D Granular Materials
Authors:
Junfei Geng,
G. Reydellet,
E. Clement,
R. P. Behringer
Abstract:
We describe experiments that probe the response to a point force of 2D granular systems under a variety of conditions. Using photoelastic particles to determine forces at the grain scale, we experimentally show that disorder, packing structure, friction and texture significantly affect the average force response in granular systems. For packings with weak disorder, the mean forces propagate prim…
▽ More
We describe experiments that probe the response to a point force of 2D granular systems under a variety of conditions. Using photoelastic particles to determine forces at the grain scale, we experimentally show that disorder, packing structure, friction and texture significantly affect the average force response in granular systems. For packings with weak disorder, the mean forces propagate primarily along lattice directions. The width of the response along these preferred directions grows with depth, increasingly so as the disorder of the system grows. Also, as the disorder increases, the two propagation directions of the mean force merge into a single direction. The response function for the mean force in the most strongly disordered system is quantitatively consistent with an elastic description for forces applied nearly normally to a surface. These observations are consistent with recent predictions of Bouchaud et al. and with the anisotropic elasticity models of Goldenberg and Goldhirsch. At this time, it is not possible to distinguish between these two models. The data do not support a diffusive picture, as in the q-model. This system with shear deformation is characterized by stress chains that are strongly oriented along an angle of 45 degrees, corresponding to the compressive direction of the shear deformation. In this case, the spatial correlation function for force has a range of only one particle size in the direction transverse to the chains, and varies as a power law in the direction of the chains, with an exponent of -0.81. The response to forces is strongest along the direction of the force chains, as expected. Forces applied in other directions are effectively refocused towards the strong force chain direction.
△ Less
Submitted 25 June, 2003; v1 submitted 1 November, 2002;
originally announced November 2002.
-
Stress response function of a granular layer: quantitative comparison between experiments and isotropic elasticity
Authors:
D. Serero,
G. Reydellet,
P. Claudin,
E. Clément,
D. Levine
Abstract:
We measured the vertical pressure response function of a layer of sand submitted to a localized normal force at its surface. We found that this response profile depends on the way the layer has been prepared: all profiles show a single centered peak whose width scales with the thickness of the layer, but a dense packing gives a wider peak than a loose one. We calculate the prediction of isotropi…
▽ More
We measured the vertical pressure response function of a layer of sand submitted to a localized normal force at its surface. We found that this response profile depends on the way the layer has been prepared: all profiles show a single centered peak whose width scales with the thickness of the layer, but a dense packing gives a wider peak than a loose one. We calculate the prediction of isotropic elastic theory in presence of a bottom boundary and compare it to the data. We found that the theory gives the right scaling and the correct qualitative shape, but fails to really fit the data.
△ Less
Submitted 31 July, 2001;
originally announced July 2001.
-
Footprints in Sand: The Response of a Granular Material to Local Perturbations
Authors:
Junfei Geng,
D. Howell,
E. Longhi,
R. P. Behringer,
G. Reydellet,
L. Vanel,
E. Clement,
S. Luding
Abstract:
We experimentally determine ensemble-averaged responses of granular packings to point forces, and we compare these results to recent models for force propagation in a granular material. We used 2D granular arrays consisting of photoelastic particles: either disks or pentagons, thus spanning the range from ordered to disordered packings. A key finding is that spatial ordering of the particles is…
▽ More
We experimentally determine ensemble-averaged responses of granular packings to point forces, and we compare these results to recent models for force propagation in a granular material. We used 2D granular arrays consisting of photoelastic particles: either disks or pentagons, thus spanning the range from ordered to disordered packings. A key finding is that spatial ordering of the particles is a key factor in the force response. Ordered packings have a propagative component that does not occur in disordered packings.
△ Less
Submitted 3 April, 2003; v1 submitted 7 December, 2000;
originally announced December 2000.
-
Green's function probe of a static granular piling
Authors:
Guillaume Reydellet,
Eric Clément
Abstract:
We present an experiment which aim is to investigate the mechanical properties of a static granular assembly. The piling is an horizontal 3D granular layer confined in a box, we apply a localized extra force at the surface and the spatial distribution of stresses at the bottom is obtained (the mechanical Green's function). For different types of granular media, we observe a linear pressure respo…
▽ More
We present an experiment which aim is to investigate the mechanical properties of a static granular assembly. The piling is an horizontal 3D granular layer confined in a box, we apply a localized extra force at the surface and the spatial distribution of stresses at the bottom is obtained (the mechanical Green's function). For different types of granular media, we observe a linear pressure response which profile shows one peak centered at the vertical of the point of application. The peak's width increases linearly when increasing the depth. This green function seems to be in -at least- qualitative agreement with predictions of elastic theory.
△ Less
Submitted 6 December, 2000;
originally announced December 2000.
