-
High-throughput development of flexible amorphous materials showing large anomalous Nernst effect via automatic annealing and thermoelectric imaging
Authors:
Sang J. Park,
Ravi Gautam,
Abdulkareem Alasli,
Takamasa Hirai,
Fuyuki Ando,
Hosei Nagano,
Hossein Sepehri-Amin,
Ken-ichi Uchida
Abstract:
This work demonstrates high-throughput screening of flexible magnetic materials for efficient transverse thermoelectric conversion based on the anomalous Nernst effect (ANE). The approach integrates automated annealing and contactless measurement of transport properties using lock-in thermography. We screen 151 Fe-based alloy ribbons with varying compositions and annealing conditions. Seven high-p…
▽ More
This work demonstrates high-throughput screening of flexible magnetic materials for efficient transverse thermoelectric conversion based on the anomalous Nernst effect (ANE). The approach integrates automated annealing and contactless measurement of transport properties using lock-in thermography. We screen 151 Fe-based alloy ribbons with varying compositions and annealing conditions. Seven high-performance candidates with mechanical flexibility are identified, exhibiting anomalous Nernst coefficients of up to 4.8 uV/K, the highest value reported for flexible materials. Structural analysis reveals that ANE enhancement occurs universally near the first crystallization temperature of the Fe-based ribbons, without strong correlation with composition. Notably, the enhancement is also observed in samples without Cu or Fe nanoclusters, indicating that short-range atomic order in the amorphous matrix may play a role in ANE. These findings demonstrate the effectiveness of high-throughput methodologies for discovering advanced ANE materials and provide new insights into thermoelectric conversion in disordered systems where conventional design principles fall short.
△ Less
Submitted 23 June, 2025;
originally announced June 2025.
-
Fundamentals and Advances in Transverse Thermoelectrics
Authors:
Hiroto Adachi,
Fuyuki Ando,
Takamasa Hirai,
Rajkumar Modak,
Matthew Grayson,
Ken-ichi Uchida
Abstract:
Transverse thermoelectric effects interconvert charge and heat currents in orthogonal directions due to the breaking of either time-reversal symmetry or structural symmetry, enabling simple and versatile thermal energy harvesting and solid-state cooling within single materials. In comparison to the complex module structures required for the conventional Seebeck and Peltier effects, the transverse…
▽ More
Transverse thermoelectric effects interconvert charge and heat currents in orthogonal directions due to the breaking of either time-reversal symmetry or structural symmetry, enabling simple and versatile thermal energy harvesting and solid-state cooling within single materials. In comparison to the complex module structures required for the conventional Seebeck and Peltier effects, the transverse thermoelectric effects provide the complete device structures, potentially resolving the fundamental issue of multi-module degradation of thermoelectric conversion performance. This review article provides an overview of all currently known transverse thermoelectric conversion phenomena and principles, as well as their characteristics, and reclassifies them in a unified manner. The performance of the transverse thermoelectric generator, refrigerator, and active cooler is formulated, showing that thermal boundary conditions play an essential role to discuss their behaviors. Examples of recent application research and material development in transverse thermoelectrics are also introduced, followed by a discussion of future prospects.
△ Less
Submitted 13 June, 2025;
originally announced June 2025.
-
Study of magneto-thermal resistance effect in a Co50Fe50/Cu multilayer through the analysis of electron and lattice thermal conductivities
Authors:
Fuya Makino,
Takamasa Hirai,
Takuma Shiga,
Hirofumi Suto,
Hiroshi Fujihisa,
Koichi Oyanagi,
Satoru Kobayashi,
Taisuke Sasaki,
Takashi Yagi,
Ken-ichi Uchida,
Yuya Sakuraba
Abstract:
This study investigates the giant magneto-thermal resistance (GMTR) effect in a fully-bcc epitaxial Co50Fe50/Cu multilayer through both experimental and theoretical approaches. The applied magnetic field results in a giant change of the cross-plane thermal conductivity (Δ\k{appa}) of 37 W m-1 K-1, which reaches 1.5 times larger than the previously reported value for a magnetic multilayer and recor…
▽ More
This study investigates the giant magneto-thermal resistance (GMTR) effect in a fully-bcc epitaxial Co50Fe50/Cu multilayer through both experimental and theoretical approaches. The applied magnetic field results in a giant change of the cross-plane thermal conductivity (Δ\k{appa}) of 37 W m-1 K-1, which reaches 1.5 times larger than the previously reported value for a magnetic multilayer and record the highest value at room temperature among the other solid-state thermal switching materials working on different principles. We investigated the electron thermal conductivity for exploring the remarkable Δ\k{appa} by the two-current-series-resistor model combined with the Wiedemann-Franz (WF) law. However, the result shows the electron contribution accounts for only 35% of the Δ\k{appa}, indicating the presence of additional spin-dependent heat carriers. Further investigation of the lattice thermal conductivity, which is expected to be spin-independent, using non-equilibrium molecular dynamics (NEMD) simulations suggests a striking contrast: the additional spin-dependent heat carrier contribution is significantly enhanced in the parallel magnetization configuration but nearly negligible in the antiparallel configuration. These findings provide a fundamental insight into the origin of large GMTR effect and highlight its potential of active thermal management technologies for future electronic devices.
△ Less
Submitted 14 May, 2025;
originally announced May 2025.
-
Quantitative measurements of transverse thermoelectric generation and cooling performances in SmCo$_5$/Bi$_{0.2}$Sb$_{1.8}$Te$_3$-based artificially tilted multilayer module
Authors:
Masayuki Murata,
Fuyuki Ando,
Takamasa Hirai,
Hiroto Adachi,
Ken-ichi Uchida
Abstract:
The transverse thermoelectric generation and cooling performances in a thermopile module composed of recently developed SmCo$_5$/Bi$_{0.2}$Sb$_{1.8}$Te$_3$ artificially tilted multilayers are evaluated quantitatively. When a large temperature difference of 405 $^\circ$C is applied to the SmCo$_5$/Bi$_{0.2}$Sb$_{1.8}$Te$_3$-based module, the open-circuit voltage and output power reach 0.51 V and 0.…
▽ More
The transverse thermoelectric generation and cooling performances in a thermopile module composed of recently developed SmCo$_5$/Bi$_{0.2}$Sb$_{1.8}$Te$_3$ artificially tilted multilayers are evaluated quantitatively. When a large temperature difference of 405 $^\circ$C is applied to the SmCo$_5$/Bi$_{0.2}$Sb$_{1.8}$Te$_3$-based module, the open-circuit voltage and output power reach 0.51 V and 0.80 W, respectively, where the corresponding maximum power density is 0.16 W/cm$^2$. The maximum energy conversion efficiency for our module in this condition is experimentally determined to be 0.92%. Under the cooling operation, the same module exhibits the maximum temperature difference of 9.0 $^\circ$C and heat flow at the cold side of 1.6 W. Although these values are lower than the ideal thermoelectric performance expected from the material parameters due to the imperfections associated with modularization, the systematic investigations reported here clarify a potential of the SmCo$_5$/Bi$_{0.2}$Sb$_{1.8}$Te$_3$ artificially tilted multilayers as thermoelectric generators and cooling devices.
△ Less
Submitted 17 April, 2025;
originally announced April 2025.
-
Adiabatic transverse thermoelectric conversion enhanced by heat current manipulation in artificially tilted multilayers
Authors:
Fuyuki Ando,
Takamasa Hirai,
Hiroto Adachi,
Ken-ichi Uchida
Abstract:
We phenomenologically formulate and experimentally observe an adiabatic transverse thermoelectric conversion enhanced by a heat current re-orientation in artificially tilted multilayers (ATMLs). By alternately stacking two materials with different thermal conductivities and rotating its multilayered structure with respect to a longitudinal temperature gradient, off-diagonal components in the therm…
▽ More
We phenomenologically formulate and experimentally observe an adiabatic transverse thermoelectric conversion enhanced by a heat current re-orientation in artificially tilted multilayers (ATMLs). By alternately stacking two materials with different thermal conductivities and rotating its multilayered structure with respect to a longitudinal temperature gradient, off-diagonal components in the thermal conductivity tensor are induced. This off-diagonal thermal conduction (ODTC) generates a finite transverse temperature gradient and Seebeck-effect-induced thermopower in the adiabatic condition, which is superposed on the isothermal transverse thermopower driven by the off-diagonal Seebeck effect (ODSE). In this study, we calculate and observe the two-dimensional temperature distribution and the resultant transverse thermopower in ATMLs comprising thermoelectric Co$_{2}$MnGa Heusler alloys and Bi$_{2-a}$Sb$_{a}$Te$_{3}$ compounds. By changing the tilt angle from 0° to 90°, the transverse temperature gradient obviously appeared in the middle angles and the transverse thermopower increases up to -116.1 $μ$V/K in Co$_{2}$MnGa/Bi$_{0.2}$Sb$_{1.8}$Te$_{3}$-based ATML at the tilt angle of 45° whereas the isothermal contribution is estimated to be -82.6 $μ$V/K from the analytical calculation. This hybrid action derived from ODTC results in the significant variation of the maximum reduced efficiency for transverse thermoelectric conversion from 3.1% in the isothermal limit to 8.1% in the adiabatic limit.
△ Less
Submitted 3 February, 2025;
originally announced February 2025.
-
Quantitative noncontact measurement of thermal Hall angle and transverse thermal conductivity by lock-in thermography
Authors:
Takumi Imamura,
Takamasa Hirai,
Koichi Oyanagi,
Ryo Iguchi,
Kenta Takamori,
Satoru Kobayashi,
Ken-ichi Uchida
Abstract:
We propose and demonstrate a quantitative noncontact measurement method for the thermal Hall effect (THE) based on magnetic-field-modulated lock-in thermography. This method enables visualization of THE-induced temperature change and quantitative estimation of the thermal Hall angle $θ_{\rm THE}$ by applying periodic magnetic fields to a sample and obtaining the first harmonic response of thermal…
▽ More
We propose and demonstrate a quantitative noncontact measurement method for the thermal Hall effect (THE) based on magnetic-field-modulated lock-in thermography. This method enables visualization of THE-induced temperature change and quantitative estimation of the thermal Hall angle $θ_{\rm THE}$ by applying periodic magnetic fields to a sample and obtaining the first harmonic response of thermal images. By combining this method with LIT-based measurement techniques for the longitudinal thermal conductivity $κ_{xx}$, we also quantify the transverse thermal conductivity $κ_{xy}$. We validate our measurement methods by estimating $θ_{\rm THE}$, $κ_{xx}$, and $κ_{xy}$ in a ferromagnetic Heusler alloy Co$_2$MnGa slab showing large THE.
△ Less
Submitted 6 February, 2025; v1 submitted 17 January, 2025;
originally announced January 2025.
-
Simultaneous achievement of large anomalous Nernst effect and reduced thermal conductivity in sintered polycrystalline topological Heusler ferromagnets
Authors:
Koichi Oyanagi,
Hossein Sepehri-Amin,
Kenta Takamori,
Terumasa Tadano,
Takumi Imamura,
Ren Nagasawa,
Krishnan Mahalingam,
Takamasa Hirai,
Fuyuki Ando,
Yuya Sakuraba,
Satoru Kobayashi,
Ken-ichi Uchida
Abstract:
This study reports the observation of the large anomalous Nernst effect in polycrystalline ferromagnetic Co$_{2}$MnGa (CMG) slabs prepared by a spark plasma sintering method. By optimizing the sintering conditions, the anomalous Nernst coefficient reaches ~7.5 $μ$V K$^{-1}$ at room temperature, comparable to the highest value reported in the single-crystalline CMG slabs. Owing to the sizable anoma…
▽ More
This study reports the observation of the large anomalous Nernst effect in polycrystalline ferromagnetic Co$_{2}$MnGa (CMG) slabs prepared by a spark plasma sintering method. By optimizing the sintering conditions, the anomalous Nernst coefficient reaches ~7.5 $μ$V K$^{-1}$ at room temperature, comparable to the highest value reported in the single-crystalline CMG slabs. Owing to the sizable anomalous Nernst coefficient and reduced thermal conductivity, the dimensionless figure of merit in our optimized CMG slab shows the record-high value of ~8$\times$10$^{-4}$ at room temperature. With the aid of the nano/microstructure characterization and first-principles phonon calculation, this study discusses the dependence of the transport properties on the degree of crystalline ordering and morphology of crystal-domain boundaries in the sintered CMG slabs. The results reveal a potential of polycrystalline topological materials for transverse thermoelectric applications, enabling the construction of large-scale modules.
△ Less
Submitted 24 June, 2025; v1 submitted 17 January, 2025;
originally announced January 2025.
-
Observation of transverse Thomson effect
Authors:
Atsushi Takahagi,
Takamasa Hirai,
Abdulkareem Alasli,
Sang Jun Park,
Hosei Nagano,
Ken-ichi Uchida
Abstract:
The thermoelectric Thomson effect, predicted in the 1850s by William Thomson, produces volumetric heating/cooling in a conductor due to the concerted action of the Seebeck and Peltier effects. Recently, transverse thermoelectrics studies on the Nernst and Ettingshausen effects have progressed rapidly to enable versatile thermal management technologies and to explore topological transport propertie…
▽ More
The thermoelectric Thomson effect, predicted in the 1850s by William Thomson, produces volumetric heating/cooling in a conductor due to the concerted action of the Seebeck and Peltier effects. Recently, transverse thermoelectrics studies on the Nernst and Ettingshausen effects have progressed rapidly to enable versatile thermal management technologies and to explore topological transport properties. However, a transverse Thomson effect, arising from the concerted action of the Nernst and Ettingshausen effects, has not yet been observed. Here, we report the observation of the transverse Thomson effect in a conductor. We observed volumetric heating/cooling in a semimetallic Bi$_{88}$Sb$_{12}$ alloy induced by a charge current, temperature gradient, and magnetic field applied orthogonally to each other using thermoelectric imaging techniques. We found that the heating/cooling can be switched by the field direction. Our experiments and analyses reveal the essential difference between the conventional and transverse Thomson effects; the former depends sorely on the temperature derivative of the Seebeck coefficient, while the latter depends not only on the temperature derivative of the Nernst coefficient but also on its magnitude. The observation of the transverse Thomson effect fills a missing piece in the history of thermoelectrics and provides a new principle for active thermal management technologies.
△ Less
Submitted 5 March, 2025; v1 submitted 10 January, 2025;
originally announced January 2025.
-
Designing flexible hard magnetic materials for zero-magnetic-field operation of the anomalous Nernst effect
Authors:
Sang J. Park,
Rajkumar Modak,
Ravi Gautam,
Abdulkareem Alasli,
Takamasa Hirai,
Fuyuki Ando,
Hosei Nagano,
Hossein Sepehri-Amin,
Ken-ichi Uchida
Abstract:
The global shift towards a carbon-neutral society has accelerated the demand for green energy, driving research into efficient technologies for harvesting energy from low-grade waste heat. Recently, transverse thermoelectrics based on the anomalous Nernst effect (ANE) has gained attention due to their simple device structure, scalability, and manufacturing-friendly nature. While topological single…
▽ More
The global shift towards a carbon-neutral society has accelerated the demand for green energy, driving research into efficient technologies for harvesting energy from low-grade waste heat. Recently, transverse thermoelectrics based on the anomalous Nernst effect (ANE) has gained attention due to their simple device structure, scalability, and manufacturing-friendly nature. While topological single crystals and epitaxial films have been focused for enhancing the ANE-driven thermoelectric performance, further improvements in material design are necessary for practical applications. Here, we report an easy-to-implement strategy for designing mechanically flexible and magnetically hard transverse thermoelectric materials by creating amorphous-crystalline heterogeneous composites. We fabricated and optimized the heterogeneous composites through controlled heat treatment, achieving significant enhancements in the coercivity and anomalous Nernst coefficient, while maintaining flexibility. Additionally, using the developed material, we constructed a single-material-based coiled device and demonstrated the zero-field operation of the ANE-based energy harvesting from curved heat sources. These results validate the feasibility of using the ANE-based flexible materials for energy harvesting applications.
△ Less
Submitted 11 December, 2024;
originally announced December 2024.
-
Hybridizing anomalous Nernst effect in artificially tilted multilayer based on magnetic topological material
Authors:
Takamasa Hirai,
Fuyuki Ando,
Hossein Sepehri-Amin,
Ken-ichi Uchida
Abstract:
Transverse thermoelectric conversion holds significant potential in addressing complex challenges faced by classical Seebeck/Peltier modules. A promising transverse thermoelectric phenomenon is the anomalous Nernst effect (ANE) originating from nontrivial band structures in magnetic topological materials. However, the currently reported performance for ANE in topological materials, e.g., Co$_2$MnG…
▽ More
Transverse thermoelectric conversion holds significant potential in addressing complex challenges faced by classical Seebeck/Peltier modules. A promising transverse thermoelectric phenomenon is the anomalous Nernst effect (ANE) originating from nontrivial band structures in magnetic topological materials. However, the currently reported performance for ANE in topological materials, e.g., Co$_2$MnGa, remains insufficient for practical thermoelectric applications. Here, we unveil a new availability for ANE by integrating magnetic topological materials into artificially tilted multilayers (ATMLs), known to exhibit the structure-induced transverse thermoelectric conversion due to the off-diagonal Seebeck effect. Our experiments reveal that the transverse thermoelectric performance in Co$_2$MnGa-based ATMLs is improved through the hybrid action of ANE and the off-diagonal Seebeck effect, with the modulation of performance dependent on magnetization being significantly greater than the performance achievable with ANE alone. This unconventional synergy underscores the importance of hybrid transverse thermoelectric conversion and paves a way for advancing thermoelectric applications using magnetic materials.
△ Less
Submitted 9 October, 2024; v1 submitted 8 June, 2024;
originally announced June 2024.
-
Nonequilibrium magnonic thermal transport engineering
Authors:
Takamasa Hirai,
Toshiaki Morita,
Subrata Biswas,
Jun Uzuhashi,
Takashi Yagi,
Yuichiro Yamashita,
Varun Kushwaha Kumar,
Fuya Makino,
Rajkumar Modak,
Yuya Sakuraba,
Tadakatsu Ohkubo,
Rulei Guo,
Bin Xu,
Junichiro Shiomi,
Daichi Chiba,
Ken-ichi Uchida
Abstract:
Thermal conductivity, a fundamental parameter characterizing thermal transport in solids, is typically determined by electron and phonon transport. Although other transport properties including electrical conductivity and thermoelectric conversion coefficients have material-specific values, it is known that thermal conductivity can be modulated artificially via phonon engineering techniques. Here,…
▽ More
Thermal conductivity, a fundamental parameter characterizing thermal transport in solids, is typically determined by electron and phonon transport. Although other transport properties including electrical conductivity and thermoelectric conversion coefficients have material-specific values, it is known that thermal conductivity can be modulated artificially via phonon engineering techniques. Here, we demonstrate another way of artificially modulating the heat conduction in solids: magnonic thermal transport engineering. The time-domain thermoreflectance measurements using ferromagnetic metal/insulator junction systems reveal that the thermal conductivity of the ferromagnetic metals and interfacial thermal conductance vary significantly depending on the spatial distribution of nonequilibrium spin currents. Systematic measurements of the thermal transport properties with changing the boundary conditions for spin currents show that the observed thermal transport modulation stems from magnon origin. This observation unveils that magnons significantly contribute to the heat conduction even in ferromagnetic metals at room temperature, upsetting the conventional wisdom that the thermal conductivity mediated by magnons is very small in metals except at low temperatures. The magnonic thermal transport engineering offers a new principle and method for active thermal management.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Multifunctional composite magnet realizing record-high transverse thermoelectric generation
Authors:
Fuyuki Ando,
Takamasa Hirai,
Abdulkareem Alasli,
Hossein Sepehri-Amin,
Yutaka Iwasaki,
Hosei Nagano,
Ken-ichi Uchida
Abstract:
Permanent magnets are used in various products and essential for human society. If omnipresent permanent magnets could directly convert heat into electricity, they would lead to innovative energy harvesting and thermal management technologies. However, achieving such "multifunctionality" has been difficult due to poor thermoelectric performance of conventional magnets. In this work, we develop a m…
▽ More
Permanent magnets are used in various products and essential for human society. If omnipresent permanent magnets could directly convert heat into electricity, they would lead to innovative energy harvesting and thermal management technologies. However, achieving such "multifunctionality" has been difficult due to poor thermoelectric performance of conventional magnets. In this work, we develop a multifunctional composite magnet (MCM) that enables giant transverse thermoelectric conversion while possessing permanent magnet features. MCM comprising alternately and obliquely stacked SmCo$_{5}$/Bi$_{0.2}$Sb$_{1.8}$Te$_{3}$ multilayers exhibits an excellent transverse thermoelectric performance at room temperature by optimizing its anisotropic structure. Owing to the extremely low interfacial electrical and thermal resistivities, the experimentally determined figure of merit $z_{\rm xy}T$ reaches 0.20 close to the analytically calculated ideal value. The MCM-based thermopile module generates 204 mW in maximum at a temperature difference of 152 K, whose power density normalized by heat transfer area and temperature gradient is not only record-high among transverse thermoelectric modules but also comparable to that of commercial thermoelectric modules utilizing the Seebeck effect. The multifunctionality of our MCM provides unprecedented opportunities for energy harvesting and thermal management everywhere permanent magnets are currently used.
△ Less
Submitted 24 March, 2025; v1 submitted 27 February, 2024;
originally announced February 2024.
-
Quantitative measurement of figure of merit for transverse thermoelectric conversion in Fe/Pt metallic multilayers
Authors:
Takumi Yamazaki,
Takamasa Hirai,
Takashi Yagi,
Yuichiro Yamashita,
Ken-ichi Uchida,
Takeshi Seki,
Koki Takanashi
Abstract:
This study presents a measurement method for determining the figure of merit for transverse thermoelectric conversion ($ z_\mathrm{T}T $) in thin film forms. Leveraging the proposed methodology, we comprehensively investigate the transverse thermoelectric coefficient ($ S_\mathrm{T} $), in-plane electrical conductivity ($ σ_{yy} $), and out-of-plane thermal conductivity ($ κ_{xx} $) in epitaxial a…
▽ More
This study presents a measurement method for determining the figure of merit for transverse thermoelectric conversion ($ z_\mathrm{T}T $) in thin film forms. Leveraging the proposed methodology, we comprehensively investigate the transverse thermoelectric coefficient ($ S_\mathrm{T} $), in-plane electrical conductivity ($ σ_{yy} $), and out-of-plane thermal conductivity ($ κ_{xx} $) in epitaxial and polycrystalline Fe/Pt metallic multilayers. The $ κ_{xx} $ values of multilayers with a number of stacking repetitions ($ N $) of 200 are lower than those of FePt alloy films, indicating that the multilayer structure effectively contributes to the suppression of $ κ_{xx} $. $ z_\mathrm{T}T $ is found to increase with increasing $ N $, which remarkably reflects the $ N $-dependent enhancement of the $ S_\mathrm{T} $ values. Notably, $ S_\mathrm{T} $ and $ σ_{yy} $ are significantly larger in the epitaxial multilayers than those in the polycrystalline counterparts, whereas negligible differences in $ κ_{xx} $ are observed between the epitaxial and polycrystalline multilayers. This discrepancy in $ σ_{yy} $ and $ κ_{xx} $ with respect to crystal growth is due to the different degree of anisotropy in electron transport between epitaxial and polycrystalline multilayers, and epitaxial growth can lead to an enhancement of $ z_\mathrm{T}T $ in the multilayers. This study is the first demonstration in the evaluation of $ z_\mathrm{T}T $ in thin film forms, and our proposed measurement technique reveals the transverse thermoelectric properties inherent to multilayers.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Creation of flexible spin-caloritronic material with giant transverse thermoelectric conversion by nanostructure engineering
Authors:
Ravi Gautam,
Takamasa Hirai,
Abdulkareem Alasli,
Hosei Nagano,
Tadakatsu Ohkubo,
Ken-ichi Uchida,
Hossein Sepehri-Amin
Abstract:
Functional materials such as magnetic, thermoelectric, and battery materials have been revolutionized through nanostructure engineering. However, spin caloritronics, an advancing field based on spintronics and thermoelectrics with fundamental physics studies, has focused only on uniform materials without complex microstructures. Here, we show how nanostructure engineering enables transforming simp…
▽ More
Functional materials such as magnetic, thermoelectric, and battery materials have been revolutionized through nanostructure engineering. However, spin caloritronics, an advancing field based on spintronics and thermoelectrics with fundamental physics studies, has focused only on uniform materials without complex microstructures. Here, we show how nanostructure engineering enables transforming simple magnetic alloys into spin-caloritronic materials displaying significantly large transverse thermoelectric conversion properties. The anomalous Nernst effect (ANE), a promising transverse thermoelectric phenomenon for energy harvesting and heat sensing, has been challenging to utilize due to the scarcity of materials with large anomalous Nernst coefficients. We demonstrate a remarkable improvement in the anomalous Nernst coefficients in flexible Fe-based amorphous materials through nanostructural engineering, without altering their composition. This surpasses all reported amorphous alloys and is comparable to single crystals showing large ANE. The enhancement is attributed to Cu nano-clustering, facilitating efficient transverse thermoelectric conversion. This discovery advances the materials science of spin caloritronics, opening new avenues for designing high-performance transverse thermoelectric devices for practical applications.
△ Less
Submitted 16 October, 2023;
originally announced October 2023.
-
Permanent-magnet-based transverse thermoelectric generator with high fill factor driven by anomalous Nernst effect
Authors:
Fuyuki Ando,
Takamasa Hirai,
Ken-ichi Uchida
Abstract:
A transverse thermoelectric generator for magnetic-field-free and high-density power generation utilizing the anomalous Nernst effect is constructed and its performance is characterized. By alternately stacking two different permanent magnets with the large coercivity and anomalous Nernst coefficients of opposite sign, transverse thermoelectric voltage and power can be generated in the absence of…
▽ More
A transverse thermoelectric generator for magnetic-field-free and high-density power generation utilizing the anomalous Nernst effect is constructed and its performance is characterized. By alternately stacking two different permanent magnets with the large coercivity and anomalous Nernst coefficients of opposite sign, transverse thermoelectric voltage and power can be generated in the absence of external magnetic fields and enhanced owing to a thermopile structure without useless electrode layers. In the permanent-magnet-based stack, the magnetic attractive force enables easy construction of the thermopile structure with a high fill factor. In this study, we construct a bulk module consisting of twelve pairs of SmCo$_5$- and Nd$_2$Fe$_{14}$B-type permanent magnets with respectively having the positive and negative anomalous Nernst coefficients, whose fill factor reaches ~80%, whereas that of conventional thermoelectric modules based on the Seebeck effect is typically 30-60%. We demonstrate magnetic-field-free anomalous Nernst power generation up to 177 $μ$W at a temperature difference of 75 K around room temperature, which corresponds to the largest anomalous Nernst power density of 65 $μ$W/cm$^2$. The presented module structure concept will provide a design guideline for high-performance transverse thermoelectric power generation.
△ Less
Submitted 5 December, 2023; v1 submitted 16 October, 2023;
originally announced October 2023.
-
Seebeck-driven transverse thermoelectric generation in magnetic hybrid bulk materials
Authors:
Weinan Zhou,
Asuka Miura,
Takamasa Hirai,
Yuya Sakuraba,
Ken-ichi Uchida
Abstract:
The Seebeck-driven transverse thermoelectric generation in magnetic/thermoelectric hybrid materials (STTG) has been investigated in all-bulk hybrid materials. The transverse thermopower in a ferromagnetic Co$_2$MnGa/thermoelectric $n$-type Si hybrid bulk material with the adjusted dimensions reaches 16.0 $μ$V/K at room temperature with the aid of the STTG contribution, which is much larger than th…
▽ More
The Seebeck-driven transverse thermoelectric generation in magnetic/thermoelectric hybrid materials (STTG) has been investigated in all-bulk hybrid materials. The transverse thermopower in a ferromagnetic Co$_2$MnGa/thermoelectric $n$-type Si hybrid bulk material with the adjusted dimensions reaches 16.0 $μ$V/K at room temperature with the aid of the STTG contribution, which is much larger than the anomalous Nernst coefficient of the Co$_2$MnGa slab (6.8 $μ$V/K). Although this transverse thermopower is smaller than the value for previously reported thin-film-based hybrid materials, the hybrid bulk materials exhibit much larger electrical power owing to their small internal resistance. This demonstration confirms the validity of STTG in bulk materials and clarifies its potential as a thermal energy harvester.
△ Less
Submitted 24 January, 2023;
originally announced January 2023.
-
Anomalous Ettingshausen effect in iron-carbon alloys
Authors:
Ren Nagasawa,
Koichi Oyanagi,
Takamasa Hirai,
Rajkumar Modak,
Satoru Kobayashi,
Ken-ichi Uchida
Abstract:
We have investigated the anomalous Ettingshausen effect (AEE) in iron-carbon alloys, i.e., cast irons and steel, using the lock-in thermography. All the alloys exhibit the clear AEE-induced temperature modulation, and their anomalous Ettingshausen coefficient is an order of magnitude greater than that of the pure iron at room temperature. The dimensionless figure of merit for AEE in the ductile ca…
▽ More
We have investigated the anomalous Ettingshausen effect (AEE) in iron-carbon alloys, i.e., cast irons and steel, using the lock-in thermography. All the alloys exhibit the clear AEE-induced temperature modulation, and their anomalous Ettingshausen coefficient is an order of magnitude greater than that of the pure iron at room temperature. The dimensionless figure of merit for AEE in the ductile cast iron is 55 times greater than that in the pure iron owing to the significant increase of the anomalous Ettingshausen coefficient. Our result reveals a potential of iron-carbon alloys as transverse thermoelectric materials, although the composition and microstructures optimizations are necessary.
△ Less
Submitted 22 August, 2022; v1 submitted 15 June, 2022;
originally announced June 2022.
-
Spin Peltier effect and its length scale in Pt/YIG system at high temperatures
Authors:
Atsushi Takahagi,
Takamasa Hirai,
Ryo Iguchi,
Keita Nakagawara,
Hosei Nagano,
Ken-ichi Uchida
Abstract:
The temperature and yttrium-iron-garnet (YIG) thickness dependences of the spin Peltier effect (SPE) have been investigated using a Pt/YIG junction system at temperatures ranging from room temperature to the Curie temperature of YIG by the lock-in thermography method. By analyzing the YIG thickness dependence using an exponential decay model, the characteristic length of SPE in YIG is estimated to…
▽ More
The temperature and yttrium-iron-garnet (YIG) thickness dependences of the spin Peltier effect (SPE) have been investigated using a Pt/YIG junction system at temperatures ranging from room temperature to the Curie temperature of YIG by the lock-in thermography method. By analyzing the YIG thickness dependence using an exponential decay model, the characteristic length of SPE in YIG is estimated to be 0.9 $μ$m near room temperature and almost constant even near the Curie temperature. The high-temperature behavior of SPE is clearly different from that of the spin Seebeck effect, providing a clue for microscopically understanding the reciprocal relation between them.
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
Seebeck-driven transverse thermoelectric generation in on-chip devices
Authors:
Weinan Zhou,
Takamasa Hirai,
Ken-ichi Uchida,
Yuya Sakuraba
Abstract:
An unconventional approach to enhance the transverse thermopower by combining magnetic and thermoelectric materials, namely the Seebeck-driven transverse thermoelectric generation (STTG), has been proposed and demonstrated recently. Here, we improve on the previously used sample structure and achieve large transverse thermopower over 40 $μ$V K$^{-1}$ due to STTG in on-chip devices. We deposited po…
▽ More
An unconventional approach to enhance the transverse thermopower by combining magnetic and thermoelectric materials, namely the Seebeck-driven transverse thermoelectric generation (STTG), has been proposed and demonstrated recently. Here, we improve on the previously used sample structure and achieve large transverse thermopower over 40 $μ$V K$^{-1}$ due to STTG in on-chip devices. We deposited polycrystalline Fe-Ga alloy films directly on n-type Si substrates, where Fe-Ga and Si serve as the magnetic and thermoelectric materials, respectively. Using microfabrication, contact holes were created through the SiO$_{x}$ layer at the top of Si to electrically connect the Fe-Ga film with the Si substrate. These thin devices with simple structure clearly exhibited enhancement of transverse thermopower due to STTG, and the obtained values agreed well with the estimation over a wide range of the size ratio between the Fe-Ga film and the Si substrate.
△ Less
Submitted 2 June, 2022; v1 submitted 22 March, 2022;
originally announced March 2022.
-
Sm-Co-based amorphous alloy films for zero-field operation of transverse thermoelectric generation
Authors:
Rajkumar Modak,
Yuya Sakuraba,
Takamasa Hirai,
Takashi Yagi,
Hossein Sepehri-Amin,
Weinan Zhou,
Hiroto Masuda,
Takeshi Seki,
Koki Takanashi,
Tadakatsu Ohkubo,
Ken-ichi Uchida
Abstract:
Transverse thermoelectric generation using magnetic materials is essential to develop active thermal engineering technologies, for which the improvements of not only the thermoelectric output but also applicability and versatility are required. In this study, using combinatorial material science and lock-in thermography technique, we have systematically investigated the transverse thermoelectric p…
▽ More
Transverse thermoelectric generation using magnetic materials is essential to develop active thermal engineering technologies, for which the improvements of not only the thermoelectric output but also applicability and versatility are required. In this study, using combinatorial material science and lock-in thermography technique, we have systematically investigated the transverse thermoelectric performance of Sm-Co-based alloy films. The high-throughput material investigation revealed the best Sm-Co-based alloys with the large anomalous Nernst effect (ANE) as well as the anomalous Ettingshausen effect (AEE). In addition to ANE/AEE, we discovered unique and superior material properties in these alloys: the amorphous structure, low thermal conductivity, and large in-plane coercivity and remanent magnetization. These properties make it advantageous over conventional materials to realize heat flux sensing applications based on ANE, as our Sm-Co-based films can generate thermoelectric output without an external magnetic field. Importantly, the amorphous nature enables the fabrication of these films on various substrates including flexible sheets, making the large-scale and low-cost manufacturing easier. Our demonstration will provide a pathway to develop flexible transverse thermoelectric devices for smart thermal management.
△ Less
Submitted 18 November, 2022; v1 submitted 21 March, 2022;
originally announced March 2022.
-
Deposition temperature dependence of thermo-spin and magneto-thermoelectric conversion in Co$_2$MnGa films on Y$_3$Fe$_5$O$_{12}$ and Gd$_3$Ga$_5$O$_{12}$
Authors:
Hayato Mizuno,
Rajkumar Modak,
Takamasa Hirai,
Atsushi Takahagi,
Yuya Sakuraba,
Ryo Iguchi,
Ken-ichi Uchida
Abstract:
We have characterized Co$_2$MnGa (CMG) Heusler alloy films grown on Y$_3$Fe$_5$O$_{12}$ (YIG) and Gd$_3$Ga$_5$O$_{12}$ (GGG) substrates at different deposition temperatures and investigated thermo-spin and magneto-thermoelectric conversion properties by means of a lock-in thermography technique. X-ray diffraction, magnetization, and electrical transport measurements show that the deposition at hig…
▽ More
We have characterized Co$_2$MnGa (CMG) Heusler alloy films grown on Y$_3$Fe$_5$O$_{12}$ (YIG) and Gd$_3$Ga$_5$O$_{12}$ (GGG) substrates at different deposition temperatures and investigated thermo-spin and magneto-thermoelectric conversion properties by means of a lock-in thermography technique. X-ray diffraction, magnetization, and electrical transport measurements show that the deposition at high substrate temperatures induces the crystallized structures of CMG while the resistivity of the CMG films on YIG (GGG) prepared at and above 500 °C (550 °C) becomes too high to measure the thermo-spin and magneto-thermoelectric effects due to large roughness, highlighting the difficulty of fabricating highly ordered continuous CMG films on garnet structures. Our lock-in thermography measurements show that the deposition at high substrate temperatures results in an increase in the current-induced temperature change for CMG/GGG and a decrease in that for CMG/YIG. The former indicates the enhancement of the anomalous Ettingshausen effect in CMG through crystallization. The latter can be explained by the superposition of the anomalous Ettingshausen effect and the spin Peltier effect induced by the positive (negative) charge-to-spin conversion for the amorphous (crystallized) CMG films. These results provide a hint to construct spin-caloritronic devices based on Heusler alloys.
△ Less
Submitted 17 May, 2022; v1 submitted 20 March, 2022;
originally announced March 2022.
-
Anomalous inverse proximity effect in unconventional-superconductor junctions
Authors:
Shu-Ichiro Suzuki,
Takashi Hirai,
Matthias Eschrig,
Yukio Tanaka
Abstract:
We investigate the effects of Andreev bound states due to the unconventional pairing on the inverse proximity effect of ferromagnet/superconductor junctions. Utilizing quasiclassical Eilenberger theory, we obtain the magnetization penetrating into the superconductor. We show that in a wide parameter range the direction of the induced magnetization is determined by two factors: whether Andreev boun…
▽ More
We investigate the effects of Andreev bound states due to the unconventional pairing on the inverse proximity effect of ferromagnet/superconductor junctions. Utilizing quasiclassical Eilenberger theory, we obtain the magnetization penetrating into the superconductor. We show that in a wide parameter range the direction of the induced magnetization is determined by two factors: whether Andreev bound states are present at the junction interface and the sign of the spin-mixing angle. In particular, when Andreev bound states appear at the interface, the direction of the induced magnetization is opposite to that without Andreev bound states. We also clarify the conditions under which the inverted induced magnetization appears. Applying this novel effect helps distinguishing the pairing symmetry of a superconductor.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
Above-room-temperature giant thermal conductivity switching in spintronic multilayer
Authors:
Hiroyasu Nakayama,
Bin Xu,
Sotaro Iwamoto,
Kaoru Yamamoto,
Ryo Iguchi,
Asuka Miura,
Takamasa Hirai,
Yoshio Miura,
Yuya Sakuraba,
Junichiro Shiomi,
Ken-ichi Uchida
Abstract:
Thermal switching provides an effective way for active heat flow control, which has recently attracted increasing attention in terms of nanoscale thermal management technologies. In magnetic and spintronic materials, the thermal conductivity depends on the magnetization configuration: this is the magneto-thermal resistance effect. Here we show that an epitaxial Cu/Co$_{50}$Fe$_{50}$ multilayer fil…
▽ More
Thermal switching provides an effective way for active heat flow control, which has recently attracted increasing attention in terms of nanoscale thermal management technologies. In magnetic and spintronic materials, the thermal conductivity depends on the magnetization configuration: this is the magneto-thermal resistance effect. Here we show that an epitaxial Cu/Co$_{50}$Fe$_{50}$ multilayer film exhibits giant magnetic-field-induced modulation of the cross-plane thermal conductivity. The magneto-thermal resistance ratio for the Cu/Co$_{50}$Fe$_{50}$ multilayer reaches 150% at room temperature, which is much larger than the previous record high. Although the ratio decreases with increasing the temperature, the giant magneto-thermal resistance effect of ~100% still appears up to 400 K. The magnetic field dependence of the thermal conductivity of the Cu/Co$_{50}$Fe$_{50}$ multilayer was observed to be about twice greater than that of the cross-plane electrical conductivity. The observation of the giant magneto-thermal resistance effect clarifies a potential of spintronic multilayers as thermal switching devices.
△ Less
Submitted 30 November, 2020;
originally announced November 2020.
-
Is water ice an efficient facilitator for dust coagulation?
Authors:
Hiroshi Kimura,
Koji Wada,
Hiroshi Kobayashi,
Hiroki Senshu,
Takayuki Hirai,
Fumi Yoshida,
Masanori Kobayashi,
Peng K. Hong,
Tomoko Arai,
Ko Ishibashi,
Manabu Yamada
Abstract:
Beyond the snow line of protoplanetary discs and inside the dense core of molecular clouds, the temperature of gas is low enough for water vapour to condense into amorphous ices on the surface of preexisting refractory dust particles. Recent numerical simulations and laboratory experiments suggest that condensation of the vapour promotes dust coagulation in such a cold region. However, in the nume…
▽ More
Beyond the snow line of protoplanetary discs and inside the dense core of molecular clouds, the temperature of gas is low enough for water vapour to condense into amorphous ices on the surface of preexisting refractory dust particles. Recent numerical simulations and laboratory experiments suggest that condensation of the vapour promotes dust coagulation in such a cold region. However, in the numerical simulations, cohesion of refractory materials is often underestimated, while in the laboratory experiments, water vapour collides with surfaces at more frequent intervals compared to the real conditions. Therefore, to re-examine the role of water ice in dust coagulation, we carry out systematic investigation of available data on coagulation of water ice particles by making full use of appropriate theories in contact mechanics and tribology. We find that the majority of experimental data are reasonably well explained by lubrication theories, owing to the presence of a quasi-liquid layer (QLL). Only exceptions are the results of dynamic collisions between particles at low temperatures, which are, instead, consistent with the JKR theory, because QLLs are too thin to dissipate their kinetic energies. By considering the vacuum conditions in protoplanetary discs and molecular clouds, the formation of amorphous water ice on the surface of refractory particles does not necessarily aid their collisional growth as currently expected. While crystallisation of water ice around but outside the snow line eases coagulation of ice-coated particles, sublimation of water ice inside the snow line is deemed to facilitate coagulation of bare refractory particles.
△ Less
Submitted 14 October, 2020; v1 submitted 13 August, 2020;
originally announced August 2020.
-
High-temperature dependence of anomalous Ettingshausen effect in SmCo$_5$-type permanent magnets
Authors:
Asuka Miura,
Keisuke Masuda,
Takamasa Hirai,
Ryo Iguchi,
Takeshi Seki,
Yoshio Miura,
Hiroki Tsuchiura,
Koki Takanashi,
Ken-ichi Uchida
Abstract:
The anomalous Ettingshausen effect (AEE) in SmCo$_5$-type permanent magnets has been investigated in the high-temperature range from room temperature to around 600 K. The anomalous Ettingshausen coefficient of the SmCo$_5$ and (SmGd)Co$_5$ magnets monotonically increases with increasing the temperature and shows the similar temperature dependence, while the coefficient of SmCo$_5$ is slightly larg…
▽ More
The anomalous Ettingshausen effect (AEE) in SmCo$_5$-type permanent magnets has been investigated in the high-temperature range from room temperature to around 600 K. The anomalous Ettingshausen coefficient of the SmCo$_5$ and (SmGd)Co$_5$ magnets monotonically increases with increasing the temperature and shows the similar temperature dependence, while the coefficient of SmCo$_5$ is slightly larger than that of (SmGd)Co$_5$ at high temperatures. The dimensionless figure of merit for AEE in SmCo$_5$ at high temperatures is much greater than the previous record obtained for the anomalous Nernst effect. The observed high-temperature behavior of AEE is discussed based on the first-principles calculations of transverse transport coefficients.
△ Less
Submitted 30 August, 2020; v1 submitted 30 July, 2020;
originally announced July 2020.
-
Remarkable suppression of Josephson current on d-wave superconductor junction
Authors:
Takashi Hirai
Abstract:
Josephson current in superconductor/insulator/superconductor junction is studied theoretically. It is well known that when the zero-energy resonance state exists both side of superconducting interface, the behaver of the temperature dependence of the critical Josephson current is striking enhancement at low temperature. On the other hand it is reported that if $d+is$-wave exists at the interface…
▽ More
Josephson current in superconductor/insulator/superconductor junction is studied theoretically. It is well known that when the zero-energy resonance state exists both side of superconducting interface, the behaver of the temperature dependence of the critical Josephson current is striking enhancement at low temperature. On the other hand it is reported that if $d+is$-wave exists at the interface, Josephson current is suppressed at low temperature. In this paper, we discuss the existence of the imaginary part of the pair potential at the interface and remarkable suppresses of dc Josephson current on d-wave superconductor 110-junction.
△ Less
Submitted 23 February, 2009; v1 submitted 8 January, 2009;
originally announced January 2009.
-
Temperature-dependence of spin-polarized transport in ferromagnet / unconventional superconductor junctions
Authors:
T. Hirai,
Y. Tanaka,
N. Yoshida,
Y. Asano,
J. Inoue,
S. Kashiwaya
Abstract:
Tunneling conductance in ferromagnet / unconventional superconductor junctions is studied theoretically as a function of temperatures and spin-polarization in feromagnets. In d-wave superconductor junctions, the existence of a zero-energy Andreev bound state drastically affects the temperature-dependence of the zero-bias conductance (ZBC). In p-wave triplet superconductor junctions, numerical re…
▽ More
Tunneling conductance in ferromagnet / unconventional superconductor junctions is studied theoretically as a function of temperatures and spin-polarization in feromagnets. In d-wave superconductor junctions, the existence of a zero-energy Andreev bound state drastically affects the temperature-dependence of the zero-bias conductance (ZBC). In p-wave triplet superconductor junctions, numerical results show a wide variety in temperature-dependence of the ZBC depending on the direction of the magnetic moment in ferromagnets and the pairing symmetry in superconductors such as $p_{x}$, $p_{y}$ and $p_{x}+ip_{y}$-wave pair potential. The last one is a promising symmetry of Sr$_2$RuO$_4$. From these characteristic features in the conductance, we may obtain the information about the degree of spin-polarization in ferromagnets and the direction of the $d$-vector in triplet superconductors.
△ Less
Submitted 18 February, 2003; v1 submitted 31 October, 2002;
originally announced October 2002.
-
Parity-sensitive measurements based on ferromagnet/superconductor tunneling junctions
Authors:
T. Hirai,
N. Yoshida,
Y. Tanaka,
J. Inoue,
S. Kashiwaya
Abstract:
A method to identify the parity of unconventional superconductors is proposed based on tunneling spectroscopy. For a model of calculation, we adopt a ferromagnet/superconductor (F/S) junction of which tunneling current is spin polarized. The tunneling conductance spectra are shown to be quite sensitive to the direction of the magnetization axis in the ferromagnet only when the superconductor has…
▽ More
A method to identify the parity of unconventional superconductors is proposed based on tunneling spectroscopy. For a model of calculation, we adopt a ferromagnet/superconductor (F/S) junction of which tunneling current is spin polarized. The tunneling conductance spectra are shown to be quite sensitive to the direction of the magnetization axis in the ferromagnet only when the superconductor has odd parity. Therefore, it is possible to distinguish the parity of the superconductor by measuring the tunneling spectroscopy in F/S junctions.
△ Less
Submitted 15 June, 2001; v1 submitted 24 May, 2001;
originally announced May 2001.
-
Theory of the Josephson effect in superconductor / one-dimensional electron gas / superconductor junction
Authors:
Yukio Tanaka,
Takashi Hirai,
Koichi Kusakabe,
Satoshi Kashiwaya
Abstract:
We present a theory for the Josephson effect in an unconventional superconductor / one-dimensional electron gas / unconventional superconductor (s/o/s) junction, where the Josephson current is carried by components injected perpendicular to the interface. When superconductors on both sides have triplet symmetries, the Josephson current is enhanced at low temperature due to the zero-energy states…
▽ More
We present a theory for the Josephson effect in an unconventional superconductor / one-dimensional electron gas / unconventional superconductor (s/o/s) junction, where the Josephson current is carried by components injected perpendicular to the interface. When superconductors on both sides have triplet symmetries, the Josephson current is enhanced at low temperature due to the zero-energy states formed near the interface. Measuring Josephson current in this s/o/s junction, we can identify parity of the superconductor.
△ Less
Submitted 11 June, 1999; v1 submitted 25 February, 1999;
originally announced February 1999.
