-
The Gravitational-wave Optical Transient Observer (GOTO): prototype performance and prospects for transient science
Authors:
D. Steeghs,
D. K. Galloway,
K. Ackley,
M. J. Dyer,
J. Lyman,
K. Ulaczyk,
R. Cutter,
Y. L. Mong,
V. Dhillon,
P. O'Brien,
G. Ramsay,
S. Poshyachinda,
R. Kotak,
L. K. Nuttall,
E. Palle,
R. P. Breton,
D. Pollacco,
E. Thrane,
S. Aukkaravittayapun,
S. Awiphan,
U. Burhanudin,
P. Chote,
A. Chrimes,
E. Daw,
C. Duffy
, et al. (28 additional authors not shown)
Abstract:
The Gravitational-wave Optical Transient Observer (GOTO) is an array of wide-field optical telescopes, designed to exploit new discoveries from the next generation of gravitational wave detectors (LIGO, Virgo, KAGRA), study rapidly evolving transients, and exploit multi-messenger opportunities arising from neutrino and very high energy gamma-ray triggers. In addition to a rapid response mode, the…
▽ More
The Gravitational-wave Optical Transient Observer (GOTO) is an array of wide-field optical telescopes, designed to exploit new discoveries from the next generation of gravitational wave detectors (LIGO, Virgo, KAGRA), study rapidly evolving transients, and exploit multi-messenger opportunities arising from neutrino and very high energy gamma-ray triggers. In addition to a rapid response mode, the array will also perform a sensitive, all-sky transient survey with few day cadence. The facility features a novel, modular design with multiple 40-cm wide-field reflectors on a single mount. In June 2017 the GOTO collaboration deployed the initial project prototype, with 4 telescope units, at the Roque de los Muchachos Observatory (ORM), La Palma, Canary Islands. Here we describe the deployment, commissioning, and performance of the prototype hardware, and discuss the impact of these findings on the final GOTO design. We also offer an initial assessment of the science prospects for the full GOTO facility that employs 32 telescope units across two sites.
△ Less
Submitted 11 October, 2021;
originally announced October 2021.
-
Measurement and Simulation of the Neutron Propagation Time Distribution inside a Neutron Monitor
Authors:
K. Chaiwongkhot,
D. Ruffolo,
W. Yamwong,
J. Prabket,
P. -S. Mangeard,
A. Sáiz,
W. Mitthumsiri,
C. Banglieng,
E. Kittiya,
W. Nuntiyakul,
U. Tippawan,
M. Jitpukdee,
S. Aukkaravittayapun
Abstract:
Using a setup for testing a prototype for a satellite-borne cosmic-ray ion detector, we have operated a stack of scintillator and silicon detectors on top of the Princess Sirindhorn Neutron Monitor (PSNM), an NM64 detector at 2560-m altitude at Doi Inthanon, Thailand (18.59 N, 98.49 E). Monte Carlo simulations have indicated that about 15% of the neutron counts by PSNM are due to interactions (mos…
▽ More
Using a setup for testing a prototype for a satellite-borne cosmic-ray ion detector, we have operated a stack of scintillator and silicon detectors on top of the Princess Sirindhorn Neutron Monitor (PSNM), an NM64 detector at 2560-m altitude at Doi Inthanon, Thailand (18.59 N, 98.49 E). Monte Carlo simulations have indicated that about 15% of the neutron counts by PSNM are due to interactions (mostly in the lead producer) of GeV-range protons among the atmospheric secondary particles from cosmic ray showers, which can be detected by the scintillator and silicon detectors. Those detectors can provide a timing trigger for measurement of the propagation time distribution of such neutrons as they scatter and propagate through the NM64, processes that are similar whether the interaction was initiated by an energetic proton (for 15% of the count rate) or neutron (for 80% of the count rate). This propagation time distribution underlies the time delay distribution between successive neutron counts, from which we can determine the leader fraction (inverse multiplicity), which has been used to monitor Galactic cosmic ray spectral variations over $\sim$1-40 GV. Here we have measured and characterized the propagation time distribution from both the experimental setup and Monte Carlo simulations of atmospheric secondary particle detection. We confirm a known propagation time distribution with a peak (at $\approx$70 microseconds) and tail over a few ms, dominated by neutron counts. We fit this distribution using an analytic model of neutron diffusion and absorption, for both experimental and Monte Carlo results. In addition we identify a group of prompt neutron monitor pulses that arrive within 20 microseconds of the charged-particle trigger, of which a substantial fraction can be attributed to charged-particle ionization in a proportional counter, according to both experimental and Monte Carlo ...
△ Less
Submitted 13 June, 2021; v1 submitted 2 June, 2021;
originally announced June 2021.
-
Processing GOTO data with the Rubin Observatory LSST Science Pipelines II: Forced Photometry and light curves
Authors:
L. Makrygianni,
J. Mullaney,
V. Dhillon,
S. Littlefair,
K. Ackley,
M. J. Dyer,
J. Lyman,
K. Ulaczyk,
R. Cutter,
Y. -L. Mong,
D. Steeghs,
D. K. Galloway,
P. O'Brien,
G. Ramsay,
S. Poshyachinda,
R. Kotak,
L. Nuttall,
E. Pallé,
D. Pollacco,
E. Thrane,
S. Aukkaravittayapun,
S. Awiphan,
R. Breton,
U. Burhanudin,
P. Chote
, et al. (23 additional authors not shown)
Abstract:
We have adapted the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) Science Pipelines to process data from the Gravitational-Wave Optical Transient Observer (GOTO) prototype. In this paper, we describe how we used the Rubin Observatory LSST Science Pipelines to conduct forced photometry measurements on nightly GOTO data. By comparing the photometry measurements of sources taken on…
▽ More
We have adapted the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) Science Pipelines to process data from the Gravitational-Wave Optical Transient Observer (GOTO) prototype. In this paper, we describe how we used the Rubin Observatory LSST Science Pipelines to conduct forced photometry measurements on nightly GOTO data. By comparing the photometry measurements of sources taken on multiple nights, we find that the precision of our photometry is typically better than 20~mmag for sources brighter than 16 mag. We also compare our photometry measurements against colour-corrected PanSTARRS photometry, and find that the two agree to within 10~mmag (1$σ$) for bright (i.e., $\sim14^{\rm th}$~mag) sources to 200~mmag for faint (i.e., $\sim18^{\rm th}$~mag) sources. Additionally, we compare our results to those obtained by GOTO's own in-house pipeline, {\sc gotophoto}, and obtain similar results. Based on repeatability measurements, we measure a $5σ$ L-band survey depth of between 19 and 20 magnitudes, depending on observing conditions. We assess, using repeated observations of non-varying standard SDSS stars, the accuracy of our uncertainties, which we find are typically overestimated by roughly a factor of two for bright sources (i.e., $<15^{\rm th}$~mag), but slightly underestimated (by roughly a factor of 1.25) for fainter sources ($>17^{\rm th}$~mag). Finally, we present lightcurves for a selection of variable sources, and compare them to those obtained with the Zwicky Transient Factory and GAIA. Despite the Rubin Observatory LSST Science Pipelines still undergoing active development, our results show that they are already delivering robust forced photometry measurements from GOTO data.
△ Less
Submitted 11 May, 2021;
originally announced May 2021.
-
Transient-optimised real-bogus classification with Bayesian Convolutional Neural Networks -- sifting the GOTO candidate stream
Authors:
T. L. Killestein,
J. Lyman,
D. Steeghs,
K. Ackley,
M. J. Dyer,
K. Ulaczyk,
R. Cutter,
Y. -L. Mong,
D. K. Galloway,
V. Dhillon,
P. O'Brien,
G. Ramsay,
S. Poshyachinda,
R. Kotak,
R. P. Breton,
L. K. Nuttall,
E. Pallé,
D. Pollacco,
E. Thrane,
S. Aukkaravittayapun,
S. Awiphan,
U. Burhanudin,
P. Chote,
A. Chrimes,
E. Daw
, et al. (23 additional authors not shown)
Abstract:
Large-scale sky surveys have played a transformative role in our understanding of astrophysical transients, only made possible by increasingly powerful machine learning-based filtering to accurately sift through the vast quantities of incoming data generated. In this paper, we present a new real-bogus classifier based on a Bayesian convolutional neural network that provides nuanced, uncertainty-aw…
▽ More
Large-scale sky surveys have played a transformative role in our understanding of astrophysical transients, only made possible by increasingly powerful machine learning-based filtering to accurately sift through the vast quantities of incoming data generated. In this paper, we present a new real-bogus classifier based on a Bayesian convolutional neural network that provides nuanced, uncertainty-aware classification of transient candidates in difference imaging, and demonstrate its application to the datastream from the GOTO wide-field optical survey. Not only are candidates assigned a well-calibrated probability of being real, but also an associated confidence that can be used to prioritise human vetting efforts and inform future model optimisation via active learning. To fully realise the potential of this architecture, we present a fully-automated training set generation method which requires no human labelling, incorporating a novel data-driven augmentation method to significantly improve the recovery of faint and nuclear transient sources. We achieve competitive classification accuracy (FPR and FNR both below 1%) compared against classifiers trained with fully human-labelled datasets, whilst being significantly quicker and less labour-intensive to build. This data-driven approach is uniquely scalable to the upcoming challenges and data needs of next-generation transient surveys. We make our data generation and model training codes available to the community.
△ Less
Submitted 19 February, 2021;
originally announced February 2021.
-
Processing GOTO data with the Rubin Observatory LSST Science Pipelines I : Production of coadded frames
Authors:
J. R. Mullaney,
L. Makrygianni,
V. Dhillon,
S. Littlefair,
K. Ackley,
M. Dyer,
J. Lyman,
K. Ulaczyk,
R. Cutter,
Y. L. Mong,
D. Steeghs,
D. K. Galloway,
P. O'Brien,
G. Ramsay,
S. Poshyachinda,
R. Kotak,
L. Nuttall,
E. Pallé,
D. Pollacco,
E. Thrane,
S. Aukkaravittayapun,
S. Awiphan,
R. Breton,
U. Burhanudin,
P. Chote
, et al. (22 additional authors not shown)
Abstract:
The past few decades have seen the burgeoning of wide field, high cadence surveys, the most formidable of which will be the Legacy Survey of Space and Time (LSST) to be conducted by the Vera C. Rubin Observatory. So new is the field of systematic time-domain survey astronomy, however, that major scientific insights will continue to be obtained using smaller, more flexible systems than the LSST. On…
▽ More
The past few decades have seen the burgeoning of wide field, high cadence surveys, the most formidable of which will be the Legacy Survey of Space and Time (LSST) to be conducted by the Vera C. Rubin Observatory. So new is the field of systematic time-domain survey astronomy, however, that major scientific insights will continue to be obtained using smaller, more flexible systems than the LSST. One such example is the Gravitational-wave Optical Transient Observer (GOTO), whose primary science objective is the optical follow-up of Gravitational Wave events. The amount and rate of data production by GOTO and other wide-area, high-cadence surveys presents a significant challenge to data processing pipelines which need to operate in near real-time to fully exploit the time-domain. In this study, we adapt the Rubin Observatory LSST Science Pipelines to process GOTO data, thereby exploring the feasibility of using this "off-the-shelf" pipeline to process data from other wide-area, high-cadence surveys. In this paper, we describe how we use the LSST Science Pipelines to process raw GOTO frames to ultimately produce calibrated coadded images and photometric source catalogues. After comparing the measured astrometry and photometry to those of matched sources from PanSTARRS DR1, we find that measured source positions are typically accurate to sub-pixel levels, and that measured L-band photometries are accurate to $\sim50$ mmag at $m_L\sim16$ and $\sim200$ mmag at $m_L\sim18$. These values compare favourably to those obtained using GOTO's primary, in-house pipeline, GOTOPHOTO, in spite of both pipelines having undergone further development and improvement beyond the implementations used in this study. Finally, we release a generic "obs package" that others can build-upon should they wish to use the LSST Science Pipelines to process data from other facilities.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
Machine Learning for Transient Recognition in Difference Imaging With Minimum Sampling Effort
Authors:
Yik-Lun Mong,
Kendall Ackley,
Duncan Galloway,
Tom Killestein,
Joe Lyman,
Danny Steeghs,
Vik Dhillon,
Paul O'Brien,
Gavin Ramsay,
Saran Poshyachinda,
Rubina Kotak,
Laura Nuttall,
Enric Pall'e,
Don Pollacco,
Eric Thrane,
Martin Dyer,
Krzysztof Ulaczyk,
Ryan Cutter,
James McCormac,
Paul Chote,
Andrew Levan,
Tom Marsh,
Elizabeth Stanway,
Ben Gompertz,
Klaas Wiersema
, et al. (23 additional authors not shown)
Abstract:
The amount of observational data produced by time-domain astronomy is exponentially in-creasing. Human inspection alone is not an effective way to identify genuine transients fromthe data. An automatic real-bogus classifier is needed and machine learning techniques are commonly used to achieve this goal. Building a training set with a sufficiently large number of verified transients is challenging…
▽ More
The amount of observational data produced by time-domain astronomy is exponentially in-creasing. Human inspection alone is not an effective way to identify genuine transients fromthe data. An automatic real-bogus classifier is needed and machine learning techniques are commonly used to achieve this goal. Building a training set with a sufficiently large number of verified transients is challenging, due to the requirement of human verification. We presentan approach for creating a training set by using all detections in the science images to be thesample of real detections and all detections in the difference images, which are generated by the process of difference imaging to detect transients, to be the samples of bogus detections. This strategy effectively minimizes the labour involved in the data labelling for supervised machine learning methods. We demonstrate the utility of the training set by using it to train several classifiers utilizing as the feature representation the normalized pixel values in 21-by-21pixel stamps centered at the detection position, observed with the Gravitational-wave Optical Transient Observer (GOTO) prototype. The real-bogus classifier trained with this strategy can provide up to 95% prediction accuracy on the real detections at a false alarm rate of 1%.
△ Less
Submitted 13 October, 2020; v1 submitted 23 August, 2020;
originally announced August 2020.
-
Searching for Electromagnetic Counterparts to Gravitational-wave Merger Events with the Prototype Gravitational-wave Optical Transient Observer (GOTO-4)
Authors:
B. P. Gompertz,
R. Cutter,
D. Steeghs,
D. K. Galloway,
J. Lyman,
K. Ulaczyk,
M. J. Dyer,
K. Ackley,
V. S. Dhillon,
P. T. O'Brien,
G. Ramsay,
S. Poshyachinda,
R. Kotak,
L. Nuttall,
R. P. Breton,
E. Pallé,
D. Pollacco,
E. Thrane,
S. Aukkaravittayapun,
S. Awiphan,
M. J. I. Brown,
U. Burhanudin,
P. Chote,
A. A. Chrimes,
E. Daw
, et al. (27 additional authors not shown)
Abstract:
We report the results of optical follow-up observations of 29 gravitational-wave triggers during the first half of the LIGO-Virgo Collaboration (LVC) O3 run with the Gravitational-wave Optical Transient Observer (GOTO) in its prototype 4-telescope configuration (GOTO-4). While no viable electromagnetic counterpart candidate was identified, we estimate our 3D (volumetric) coverage using test light…
▽ More
We report the results of optical follow-up observations of 29 gravitational-wave triggers during the first half of the LIGO-Virgo Collaboration (LVC) O3 run with the Gravitational-wave Optical Transient Observer (GOTO) in its prototype 4-telescope configuration (GOTO-4). While no viable electromagnetic counterpart candidate was identified, we estimate our 3D (volumetric) coverage using test light curves of on- and off-axis gamma-ray bursts and kilonovae. In cases where the source region was observable immediately, GOTO-4 was able to respond to a GW alert in less than a minute. The average time of first observation was $8.79$ hours after receiving an alert ($9.90$ hours after trigger). A mean of $732.3$ square degrees were tiled per event, representing on average $45.3$ per cent of the LVC probability map, or $70.3$ per cent of the observable probability. This coverage will further improve as the facility scales up alongside the localisation performance of the evolving gravitational-wave detector network. Even in its 4-telescope prototype configuration, GOTO is capable of detecting AT2017gfo-like kilonovae beyond 200~Mpc in favourable observing conditions. We cannot currently place meaningful electromagnetic limits on the population of distant ($\hat{D}_L = 1.3$~Gpc) binary black hole mergers because our test models are too faint to recover at this distance. However, as GOTO is upgraded towards its full 32-telescope, 2 node (La Palma \& Australia) configuration, it is expected to be sufficiently sensitive to cover the predicted O4 binary neutron star merger volume, and will be able to respond to both northern and southern triggers.
△ Less
Submitted 28 July, 2020; v1 submitted 31 March, 2020;
originally announced April 2020.
