Title:Response of a turbulent boundary layer to steady, square-wave-type transverse wall-forcing

Abstract:This study investigates the spatial evolution of a zero pressure gradient turbulent boundary layer (TBL) imposed by a square-wave (SqW) of steady spanwise wall-forcing, which varies along the streamwise direction ($x$). The SqW wall-forcing is imposed experimentally via a series of streamwise periodic belts running in opposite spanwise directions, following the methodology of Knoop et al. (Exp. Fluids, vol 65, 2024), with the streamwise extent increased to beyond $\sim 11$ times the boundary layer thickness (${\delta}_o$) in the present study. This unique setup is leveraged to investigate the influence of viscous-scaled wavelength of SqW wall-forcing on the turbulent drag reduction (DR) efficacy for $\lambda^+_x = $ 471 (sub-optimal), 942 (near-optimal), and 1884 (post-optimal conditions), at fixed viscous-scaled wall-forcing amplitude, $A^+ = 12$, and friction Reynolds number, $Re_\tau = 960$. The TBL's response to this wall-forcing is elucidated by drawing inspiration from established knowledge on traditionally studied sinusoidal forcing (SinW), based on analysis of the streamwise-phase variation of the Stokes strain rate (SSR). The analysis reveals the SqW forcing to be characterized by a combination of two markedly different SSR regimes whose influence on the overlying turbulence is found to depend on the forcing waveform: sub-phase-I of local and strong impulses of SSR downstream of the half- ($\lambda_x$/2) and full-phase ($\lambda_x$) locations, associated with a reversal in spanwise forcing directions, leading to significant turbulence attenuation, and sub-phase-II of near-zero SSR over the remainder of forcing phase that enables turbulence recovery (when wall-forcing magnitudes and direction remain constant).