Title:Development of a Compton Imager Setup

Abstract:Hard X-ray photons with energies in the range of hundreds of keV typically undergo Compton scattering when they are incident on a detector. In this process, an incident photon deposits a fraction of its energy at the point of incidence and continues onward with a change in direction that depends on the amount of energy deposited. By using a pair of detectors to detect the point of incidence and the direction of the scattered photon, we can calculate the scattering direction and angle. The position of a source in the sky can be reconstructed using many Compton photon pairs from a source. We demonstrate this principle in the laboratory by using a pair of Cadmium Zinc Telluride detectors sensitive in the energy range of 20-200 keV. The laboratory setup consists of the two detectors placed perpendicular to each other in a lead-lined box. The detectors are read out by a custom-programmed Xilinx PYNQ FPGA board, and data is then transferred to a PC. The detectors are first calibrated using lines from $^{241}\mathrm{Am}$, $^{155}\mathrm{Eu}$ and $^{133}\mathrm{Ba}$ sources. We irradiated the detectors with a collimated $^{133}\mathrm{Ba}$ source and identified Compton scattering events for the 356 keV line. We run a Compton reconstruction algorithm and correctly infer the location of the source in the detector frame. This comprises a successful technology demonstration for a Compton imaging camera in the Hard X-ray regime. We present the details of our setup, the data acquisition process, and software algorithms, and showcase our results.