Title:Using electrical impedance spectroscopy to identify equivalent circuit models of lubricated contacts with complex geometry: in-situ application to mini traction machine

Abstract:Electrical contact resistance or capacitance as measured between a lubricated contact has been used in tribometers, partially reflecting the lubrication condition. In contrast, the electrical impedance provides rich information of magnitude and phase, which can be interpreted using equivalent circuit models, enabling more comprehensive measurements, including the variation of lubricant film thickness and the asperity (metal to metal) contact area. An accurate circuit model of the lubricated contact is critical as needed for the electrical impedance analysis. However, existing circuit models are hand derived and suited to interfaces with simple geometry, such as parallel plates, concentric and eccentric cylinders. Circuit model identification of lubricated contacts with complex geometry is challenging. This work takes the ball-on-disc lubricated contact in a Mini Traction Machine (MTM) as an example, where screws on the ball, grooves on the disc, and contact close to the disc edge make the overall interface geometry complicated. The electrical impedance spectroscopy (EIS) is used to capture its frequency response, with a group of load, speed, and temperature varied and tested separately. The results enable an identification of equivalent circuit models by fitting parallel resistor-capacitor models, the dependence on the oil film thickness is further calibrated using a high-accuracy optical interferometry, which is operated under the same lubrication condition as in the MTM. Overall, the proposed method is applicable to general lubricated interfaces for the identification of equivalent circuit models, which in turn facilitates in-situ tribo-contacts with electric impedance measurement of oil film thickness. It does not need transparent materials as optical techniques do, or structural modifications for piezoelectric sensor mounting as ultrasound techniques do.