Title:Effect of impurities on morphology and growth mode of (111) and (001) epitaxial-like ScN films

Abstract:ScN material is an emerging semiconductor with an indirect bandgap. It has attracted attention for its thermoelectric properties, use as seed layers, and for alloys for piezoelectric application. ScN or other transition metal nitride semiconductors used for their interesting electrical properties are sensitive to contaminants, such as oxygen or fluorine. In this present article, the influence of depositions conditions on the amount of oxygen contaminants incorporated in ScN films were investigated and their effects on the electrical properties (electrical resistivity and Seebeck coefficient) were studied. The epitaxial-like films of thickness 125 +-5 nm to 155 +-5 nm were deposited by D.C.-magnetron sputtering on c-plane Al2O3, MgO(111) and r-plane Al2O3 at a substrate temperature ranging from 700 to 950 degree C. The amount of oxygen contaminants presents in the film, dissolved into ScN or as an oxide, was related to the adatom mobility during growth, which is affected by the deposition temperature and the presence of twin domain growth. The lowest values of electrical resistivity of 50 micro-ohm cm were obtained on ScN(111)/MgO(111) and on ScN(001)/r-plane Al2O3 grown at 950 degree C with no twin domains and the lowest amount of oxygen contaminant. At the best, the films exhibited an electrical resistivity of 50 micro-ohm cm with Seebeck coefficient values maintained at -40 microV K-1, thus a power factor estimated at 3.2 10-3 W m-1 K-2 (at room temperature).