-
On the use of Statistical Learning Theory for model selection in Structural Health Monitoring
Authors:
C. A. Lindley,
N. Dervilis,
K. Worden
Abstract:
Whenever data-based systems are employed in engineering applications, defining an optimal statistical representation is subject to the problem of model selection. This paper focusses on how well models can generalise in Structural Health Monitoring (SHM). Although statistical model validation in this field is often performed heuristically, it is possible to estimate generalisation more rigorously…
▽ More
Whenever data-based systems are employed in engineering applications, defining an optimal statistical representation is subject to the problem of model selection. This paper focusses on how well models can generalise in Structural Health Monitoring (SHM). Although statistical model validation in this field is often performed heuristically, it is possible to estimate generalisation more rigorously using the bounds provided by Statistical Learning Theory (SLT). Therefore, this paper explores the selection process of a kernel smoother for modelling the impulse response of a linear oscillator from the perspective of SLT. It is demonstrated that incorporating domain knowledge into the regression problem yields a lower guaranteed risk, thereby enhancing generalisation.
△ Less
Submitted 14 January, 2025;
originally announced January 2025.
-
Quantifying the value of information transfer in population-based SHM
Authors:
Aidan J. Hughes,
Jack Poole,
Nikolaos Dervilis,
Paul Gardner,
Keith Worden
Abstract:
Population-based structural health monitoring (PBSHM), seeks to address some of the limitations associated with data scarcity that arise in traditional SHM. A tenet of the population-based approach to SHM is that information can be shared between sufficiently-similar structures in order to improve predictive models. Transfer learning techniques, such as domain adaptation, have been shown to be a h…
▽ More
Population-based structural health monitoring (PBSHM), seeks to address some of the limitations associated with data scarcity that arise in traditional SHM. A tenet of the population-based approach to SHM is that information can be shared between sufficiently-similar structures in order to improve predictive models. Transfer learning techniques, such as domain adaptation, have been shown to be a highly-useful technology for sharing information between structures when developing statistical classifiers for PBSHM. Nonetheless, transfer-learning techniques are not without their pitfalls. In some circumstances, for example if the data distributions associated with the structures within a population are dissimilar, applying transfer-learning methods can be detrimental to classification performance -- this phenomenon is known as negative transfer. Given the potentially-severe consequences of negative transfer, it is prudent for engineers to ask the question `when, what, and how should one transfer between structures?'.
The current paper aims to demonstrate a transfer-strategy decision process for a classification task for a population of simulated structures in the context of a representative SHM maintenance problem, supported by domain adaptation. The transfer decision framework is based upon the concept of expected value of information transfer. In order to compute the expected value of information transfer, predictions must be made regarding the classification (and decision performance) in the target domain following information transfer. In order to forecast the outcome of transfers, a probabilistic regression is used here to predict classification performance from a proxy for structural similarity based on the modal assurance criterion.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
A probabilistic approach for acoustic emission based monitoring techniques: with application to structural health monitoring
Authors:
C. A. Lindley,
M. R. Jones,
T. J. Rogers,
E. J. Cross,
R. S. Dwyer-Joyce,
N. Dervilis,
K. Worden
Abstract:
It has been demonstrated that acoustic-emission (AE), inspection of structures can offer advantages over other types of monitoring techniques in the detection of damage; namely, an increased sensitivity to damage, as well as an ability to localise its source. There are, however, numerous challenges associated with the analysis of AE data. One issue is the high sampling frequencies required to capt…
▽ More
It has been demonstrated that acoustic-emission (AE), inspection of structures can offer advantages over other types of monitoring techniques in the detection of damage; namely, an increased sensitivity to damage, as well as an ability to localise its source. There are, however, numerous challenges associated with the analysis of AE data. One issue is the high sampling frequencies required to capture AE activity. In just a few seconds, a recording can generate very high volumes of data, of which a significant portion may be of little interest for analysis. Identifying the individual AE events in a recorded time-series is therefore a necessary procedure to reduce the size of the dataset. Another challenge that is also generally encountered in practice, is determining the sources of AE, which is an important exercise if one wishes to enhance the quality of the diagnostic scheme. In this paper, a state-of-the-art technique is presented that can automatically identify AE events, and simultaneously help in their characterisation from a probabilistic perspective. A nonparametric Bayesian approach, based on the Dirichlet process (DP), is employed to overcome some of the challenges associated with these tasks. Two main sets of AE data are considered in this work: (1) from a journal bearing in operation, and (2) from an Airbus A320 main landing gear subjected to fatigue testing.
△ Less
Submitted 10 December, 2023; v1 submitted 26 April, 2023;
originally announced April 2023.
-
On topological data analysis for structural dynamics: an introduction to persistent homology
Authors:
Tristan Gowdridge,
Nikolaos Dervilis,
Keith Worden
Abstract:
Topological methods can provide a way of proposing new metrics and methods of scrutinising data, that otherwise may be overlooked. In this work, a method of quantifying the shape of data, via a topic called topological data analysis will be introduced. The main tool within topological data analysis (TDA) is persistent homology. Persistent homology is a method of quantifying the shape of data over…
▽ More
Topological methods can provide a way of proposing new metrics and methods of scrutinising data, that otherwise may be overlooked. In this work, a method of quantifying the shape of data, via a topic called topological data analysis will be introduced. The main tool within topological data analysis (TDA) is persistent homology. Persistent homology is a method of quantifying the shape of data over a range of length scales. The required background and a method of computing persistent homology is briefly discussed in this work. Ideas from topological data analysis are then used for nonlinear dynamics to analyse some common attractors, by calculating their embedding dimension, and then to assess their general topologies. A method will also be proposed, that uses topological data analysis to determine the optimal delay for a time-delay embedding. TDA will also be applied to a Z24 Bridge case study in structural health monitoring, where it will be used to scrutinise different data partitions, classified by the conditions at which the data were collected. A metric, from topological data analysis, is used to compare data between the partitions. The results presented demonstrate that the presence of damage alters the manifold shape more significantly than the effects present from temperature.
△ Less
Submitted 12 September, 2022;
originally announced September 2022.
-
A Bayesian Method for Material Identification of Composite Plates via Dispersion Curves
Authors:
Marcus Haywood-Alexander,
Nikolaos Dervilis,
Keith Worden,
Robin S. Mills,
Purim Ladpli,
Timothy J. Rogers
Abstract:
Ultrasonic guided waves offer a convenient and practical approach to structural health monitoring and non-destructive evaluation. A key property of guided waves is the fully-defined relationship between central frequency and propagation characteristics (phase velocity, group velocity and wavenumber) -- which is described using dispersion curves. For many guided wave-based strategies, accurate disp…
▽ More
Ultrasonic guided waves offer a convenient and practical approach to structural health monitoring and non-destructive evaluation. A key property of guided waves is the fully-defined relationship between central frequency and propagation characteristics (phase velocity, group velocity and wavenumber) -- which is described using dispersion curves. For many guided wave-based strategies, accurate dispersion curve information is invaluable, such as group velocity for localisation. From experimental observations of dispersion curves, a system identification procedure can be used to determine the governing material properties. As well as returning an estimated value, it is useful to determine the distribution of these properties based on measured data. A method of simulating samples from these distributions is to use the iterative Markov-Chain Monte Carlo (MCMC) procedure, which allows for freedom in the shape of the posterior. In this work, a scanning-laser doppler vibrometer is used to record the propagation of Lamb waves in a unidirectional-glass-fibre composite plate, and dispersion curve data for various propagation angles are extracted. Using these measured dispersion curve data, the MCMC sampling procedure is performed to provide a Bayesian approach to determining the dispersion curve information for an arbitrary plate.
△ Less
Submitted 9 November, 2022; v1 submitted 8 September, 2022;
originally announced September 2022.
-
On an Application of Generative Adversarial Networks on Remaining Lifetime Estimation
Authors:
G. Tsialiamanis,
D. Wagg,
N. Dervilis,
K. Worden
Abstract:
A major problem of structural health monitoring (SHM) has been the prognosis of damage and the definition of the remaining useful life of a structure. Both tasks depend on many parameters, many of which are often uncertain. Many models have been developed for the aforementioned tasks but they have been either deterministic or stochastic with the ability to take into account only a restricted amoun…
▽ More
A major problem of structural health monitoring (SHM) has been the prognosis of damage and the definition of the remaining useful life of a structure. Both tasks depend on many parameters, many of which are often uncertain. Many models have been developed for the aforementioned tasks but they have been either deterministic or stochastic with the ability to take into account only a restricted amount of past states of the structure. In the current work, a generative model is proposed in order to make predictions about the damage evolution of structures. The model is able to perform in a population-based SHM (PBSHM) framework, to take into account many past states of the damaged structure, to incorporate uncertainties in the modelling process and to generate potential damage evolution outcomes according to data acquired from a structure. The algorithm is tested on a simulated damage evolution example and the results reveal that it is able to provide quite confident predictions about the remaining useful life of structures within a population.
△ Less
Submitted 18 August, 2022;
originally announced August 2022.
-
Mitigating sampling bias in risk-based active learning via an EM algorithm
Authors:
Aidan J. Hughes,
Lawrence A. Bull,
Paul Gardner,
Nikolaos Dervilis,
Keith Worden
Abstract:
Risk-based active learning is an approach to developing statistical classifiers for online decision-support. In this approach, data-label querying is guided according to the expected value of perfect information for incipient data points. For SHM applications, the value of information is evaluated with respect to a maintenance decision process, and the data-label querying corresponds to the inspec…
▽ More
Risk-based active learning is an approach to developing statistical classifiers for online decision-support. In this approach, data-label querying is guided according to the expected value of perfect information for incipient data points. For SHM applications, the value of information is evaluated with respect to a maintenance decision process, and the data-label querying corresponds to the inspection of a structure to determine its health state. Sampling bias is a known issue within active-learning paradigms; this occurs when an active learning process over- or undersamples specific regions of a feature-space, thereby resulting in a training set that is not representative of the underlying distribution. This bias ultimately degrades decision-making performance, and as a consequence, results in unnecessary costs incurred. The current paper outlines a risk-based approach to active learning that utilises a semi-supervised Gaussian mixture model. The semi-supervised approach counteracts sampling bias by incorporating pseudo-labels for unlabelled data via an EM algorithm. The approach is demonstrated on a numerical example representative of the decision processes found in SHM.
△ Less
Submitted 25 June, 2022;
originally announced June 2022.
-
A generalised form for a homogeneous population of structures using an overlapping mixture of Gaussian processes
Authors:
Tina A. Dardeno,
Lawrence A. Bull,
Nikolaos Dervilis,
Keith Worden
Abstract:
Reductions in natural frequency are often used as a damage indicator for structural health monitoring (SHM) purposes. However, fluctuations in operational and environmental conditions, changes in boundary conditions, and slight differences among nominally-identical structures can also affect stiffness, producing frequency changes that mimic or mask damage. This variability has limited the practica…
▽ More
Reductions in natural frequency are often used as a damage indicator for structural health monitoring (SHM) purposes. However, fluctuations in operational and environmental conditions, changes in boundary conditions, and slight differences among nominally-identical structures can also affect stiffness, producing frequency changes that mimic or mask damage. This variability has limited the practical implementation and generalisation of SHM technologies. The aim of this work is to investigate the effects of normal variation, and to identify methods that account for the resulting uncertainty.
This work considers vibration data collected from a set of four healthy full-scale composite helicopter blades. The blades were nominally-identical but distinct, and slight differences in material properties and geometry among the blades caused significant variability in the frequency response functions, which presented as four separate trajectories across the input space. In this paper, an overlapping mixture of Gaussian processes (OMGP), was used to generate labels and quantify the uncertainty of normal-condition frequency response data from the helicopter blades. Using a population-based approach, the OMGP model provided a generic representation, called a form, to characterise the normal condition of the blades. Additional simulated data were then compared against the form and evaluated for damage using a marginal-likelihood novelty index.
△ Less
Submitted 23 June, 2022;
originally announced June 2022.
-
Improving decision-making via risk-based active learning: Probabilistic discriminative classifiers
Authors:
Aidan J. Hughes,
Paul Gardner,
Lawrence A. Bull,
Nikolaos Dervilis,
Keith Worden
Abstract:
Gaining the ability to make informed decisions on operation and maintenance of structures provides motivation for the implementation of structural health monitoring (SHM) systems. However, descriptive labels for measured data corresponding to health-states of the monitored system are often unavailable. This issue limits the applicability of fully-supervised machine learning paradigms for the devel…
▽ More
Gaining the ability to make informed decisions on operation and maintenance of structures provides motivation for the implementation of structural health monitoring (SHM) systems. However, descriptive labels for measured data corresponding to health-states of the monitored system are often unavailable. This issue limits the applicability of fully-supervised machine learning paradigms for the development of statistical classifiers to be used in decision-support in SHM systems. One approach to dealing with this problem is risk-based active learning. In such an approach, data-label querying is guided according to the expected value of perfect information for incipient data points. For risk-based active learning in SHM, the value of information is evaluated with respect to a maintenance decision process, and the data-label querying corresponds to the inspection of a structure to determine its health state.
In the context of SHM, risk-based active learning has only been considered for generative classifiers. The current paper demonstrates several advantages of using an alternative type of classifier -- discriminative models. Using the Z24 Bridge dataset as a case study, it is shown that discriminative classifiers have benefits, in the context of SHM decision-support, including improved robustness to sampling bias, and reduced expenditure on structural inspections.
△ Less
Submitted 23 June, 2022;
originally announced June 2022.
-
Informative Bayesian Tools for Damage Localisation by Decomposition of Lamb Wave Signals
Authors:
Marcus Haywood-Alexander,
Nikolaos Dervilis,
Keith Worden,
Gordon Dobie,
Timothy J. Rogers
Abstract:
Ultrasonic guided waves offer a convenient and practical approach to structural health monitoring and non-destructive evaluation, thanks to some distinct advantages. Guided waves, in particular Lamb waves, can be used to localise damage by utilising prior knowledge of propagation and reflection characteristics. Typical localisation methods make use of the time of arrival of waves emitted or reflec…
▽ More
Ultrasonic guided waves offer a convenient and practical approach to structural health monitoring and non-destructive evaluation, thanks to some distinct advantages. Guided waves, in particular Lamb waves, can be used to localise damage by utilising prior knowledge of propagation and reflection characteristics. Typical localisation methods make use of the time of arrival of waves emitted or reflected from the damage, the simplest of which involves triangulation. It is useful to decompose the measured signal into the expected waves propagating directly from the actuation source in the absence of damage, and for this paper referred to as nominal waves. This decomposition allows for determination of waves reflected from damage, boundaries or other local inhomogeneities. Previous decomposition methods make use of accurate analytical models, but there is a gap in methods of decomposition for complex materials and structures. A new method is shown here which uses a Bayesian approach to decompose single-source signals, which has the advantage of quantification of the uncertainty of the expected signal. Furthermore, the approach produces inherent parametric features which correlate to known physics of guided waves. In this paper, the decomposition method is demonstrated on data from a simulation of guided wave propagation in a small aluminium plate, using the local interaction simulation approach, for a damaged and undamaged case. Analysis of the decomposition method is done in three ways; inspect individual decomposed signals, track the inherently produced parametric features along propagation distance, and use method in a localisation strategy. The Bayesian decomposition was found to work well for the assessment criteria mentioned above. The use of these waves in the localisation method returned estimates accurate to within 1mm in many sensor configurations.
△ Less
Submitted 24 May, 2022;
originally announced May 2022.
-
Modelling variability in vibration-based PBSHM via a generalised population form
Authors:
Tina A Dardeno,
Lawrence A Bull,
Robin S Mills,
Nikolaos Dervilis,
Keith Worden
Abstract:
Structural health monitoring (SHM) has been an active research area for the last three decades, and has accumulated a number of critical advances over that period, as can be seen in the literature. However, SHM is still facing challenges because of the paucity of damage-state data, operational and environmental fluctuations, repeatability issues, and changes in boundary conditions. These issues pr…
▽ More
Structural health monitoring (SHM) has been an active research area for the last three decades, and has accumulated a number of critical advances over that period, as can be seen in the literature. However, SHM is still facing challenges because of the paucity of damage-state data, operational and environmental fluctuations, repeatability issues, and changes in boundary conditions. These issues present as inconsistencies in the captured features and can have a huge impact on the practical implementation, but more critically, on the generalisation of the technology. Population-based SHM has been designed to address some of these concerns by modelling and transferring missing information using data collected from groups of similar structures.
In this work, vibration data were collected from four healthy, nominally-identical, full-scale composite helicopter blades. Manufacturing differences (e.g., slight differences in geometry and/or material properties), among the blades presented as variability in their structural dynamics, which can be very problematic for SHM based on machine learning from vibration data. This work aims to address this variability by defining a general model for the frequency response functions of the blades, called a form, using mixtures of Gaussian processes.
△ Less
Submitted 30 August, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
On generative models as the basis for digital twins
Authors:
G. Tsialiamanis,
D. J. Wagg,
N. Dervilis,
K. Worden
Abstract:
A framework is proposed for generative models as a basis for digital twins or mirrors of structures. The proposal is based on the premise that deterministic models cannot account for the uncertainty present in most structural modelling applications. Two different types of generative models are considered here. The first is a physics-based model based on the stochastic finite element (SFE) method,…
▽ More
A framework is proposed for generative models as a basis for digital twins or mirrors of structures. The proposal is based on the premise that deterministic models cannot account for the uncertainty present in most structural modelling applications. Two different types of generative models are considered here. The first is a physics-based model based on the stochastic finite element (SFE) method, which is widely used when modelling structures that have material and loading uncertainties imposed. Such models can be calibrated according to data from the structure and would be expected to outperform any other model if the modelling accurately captures the true underlying physics of the structure. The potential use of SFE models as digital mirrors is illustrated via application to a linear structure with stochastic material properties. For situations where the physical formulation of such models does not suffice, a data-driven framework is proposed, using machine learning and conditional generative adversarial networks (cGANs). The latter algorithm is used to learn the distribution of the quantity of interest in a structure with material nonlinearities and uncertainties. For the examples considered in this work, the data-driven cGANs model outperform the physics-based approach. Finally, an example is shown where the two methods are coupled such that a hybrid model approach is demonstrated.
△ Less
Submitted 8 March, 2022;
originally announced March 2022.
-
On robust risk-based active-learning algorithms for enhanced decision support
Authors:
Aidan J. Hughes,
Lawrence A. Bull,
Paul Gardner,
Nikolaos Dervilis,
Keith Worden
Abstract:
Classification models are a fundamental component of physical-asset management technologies such as structural health monitoring (SHM) systems and digital twins. Previous work introduced risk-based active learning, an online approach for the development of statistical classifiers that takes into account the decision-support context in which they are applied. Decision-making is considered by prefer…
▽ More
Classification models are a fundamental component of physical-asset management technologies such as structural health monitoring (SHM) systems and digital twins. Previous work introduced risk-based active learning, an online approach for the development of statistical classifiers that takes into account the decision-support context in which they are applied. Decision-making is considered by preferentially querying data labels according to expected value of perfect information (EVPI). Although several benefits are gained by adopting a risk-based active learning approach, including improved decision-making performance, the algorithms suffer from issues relating to sampling bias as a result of the guided querying process. This sampling bias ultimately manifests as a decline in decision-making performance during the later stages of active learning, which in turn corresponds to lost resource/utility.
The current paper proposes two novel approaches to counteract the effects of sampling bias: semi-supervised learning, and discriminative classification models. These approaches are first visualised using a synthetic dataset, then subsequently applied to an experimental case study, specifically, the Z24 Bridge dataset. The semi-supervised learning approach is shown to have variable performance; with robustness to sampling bias dependent on the suitability of the generative distributions selected for the model with respect to each dataset. In contrast, the discriminative classifiers are shown to have excellent robustness to the effects of sampling bias. Moreover, it was found that the number of inspections made during a monitoring campaign, and therefore resource expenditure, could be reduced with the careful selection of the statistical classifiers used within a decision-supporting monitoring system.
△ Less
Submitted 12 July, 2022; v1 submitted 7 January, 2022;
originally announced January 2022.
-
Bayesian Modelling of Multivalued Power Curves from an Operational Wind Farm
Authors:
L. A. Bull,
P. A. Gardner,
T. J. Rogers,
N. Dervilis,
E. J. Cross,
E. Papatheou,
A. E. Maguire,
C. Campos,
K. Worden
Abstract:
Power curves capture the relationship between wind speed and output power for a specific wind turbine. Accurate regression models of this function prove useful in monitoring, maintenance, design, and planning. In practice, however, the measurements do not always correspond to the ideal curve: power curtailments will appear as (additional) functional components. Such multivalued relationships canno…
▽ More
Power curves capture the relationship between wind speed and output power for a specific wind turbine. Accurate regression models of this function prove useful in monitoring, maintenance, design, and planning. In practice, however, the measurements do not always correspond to the ideal curve: power curtailments will appear as (additional) functional components. Such multivalued relationships cannot be modelled by conventional regression, and the associated data are usually removed during pre-processing. The current work suggests an alternative method to infer multivalued relationships in curtailed power data. Using a population-based approach, an overlapping mixture of probabilistic regression models is applied to signals recorded from turbines within an operational wind farm. The model is shown to provide an accurate representation of practical power data across the population.
△ Less
Submitted 30 November, 2021;
originally announced November 2021.
-
On risk-based active learning for structural health monitoring
Authors:
A. J. Hughes,
L. A. Bull,
P. Gardner,
R. J. Barthorpe,
N. Dervilis,
K. Worden
Abstract:
A primary motivation for the development and implementation of structural health monitoring systems, is the prospect of gaining the ability to make informed decisions regarding the operation and maintenance of structures and infrastructure. Unfortunately, descriptive labels for measured data corresponding to health-state information for the structure of interest are seldom available prior to the i…
▽ More
A primary motivation for the development and implementation of structural health monitoring systems, is the prospect of gaining the ability to make informed decisions regarding the operation and maintenance of structures and infrastructure. Unfortunately, descriptive labels for measured data corresponding to health-state information for the structure of interest are seldom available prior to the implementation of a monitoring system. This issue limits the applicability of the traditional supervised and unsupervised approaches to machine learning in the development of statistical classifiers for decision-supporting SHM systems.
The current paper presents a risk-based formulation of active learning, in which the querying of class-label information is guided by the expected value of said information for each incipient data point. When applied to structural health monitoring, the querying of class labels can be mapped onto the inspection of a structure of interest in order to determine its health state. In the current paper, the risk-based active learning process is explained and visualised via a representative numerical example and subsequently applied to the Z24 Bridge benchmark. The results of the case studies indicate that a decision-maker's performance can be improved via the risk-based active learning of a statistical classifier, such that the decision process itself is taken into account.
△ Less
Submitted 16 November, 2021; v1 submitted 12 May, 2021;
originally announced May 2021.
-
Foundations of Population-Based SHM, Part IV: The Geometry of Spaces of Structures and their Feature Spaces
Authors:
George Tsialiamanis,
Charilaos Mylonas,
Eleni Chatzi,
Nikolaos Dervilis,
David J. Wagg,
Keith Worden
Abstract:
One of the requirements of the population-based approach to Structural Health Monitoring (SHM) proposed in the earlier papers in this sequence, is that structures be represented by points in an abstract space. Furthermore, these spaces should be metric spaces in a loose sense; i.e. there should be some measure of distance applicable to pairs of points; similar structures should then be close in th…
▽ More
One of the requirements of the population-based approach to Structural Health Monitoring (SHM) proposed in the earlier papers in this sequence, is that structures be represented by points in an abstract space. Furthermore, these spaces should be metric spaces in a loose sense; i.e. there should be some measure of distance applicable to pairs of points; similar structures should then be close in the metric. However, this geometrical construction is not enough for the framing of problems in data-based SHM, as it leaves undefined the notion of feature spaces. Interpreting the feature values on a structure-by-structure basis as a type of field over the space of structures, it seems sensible to borrow an idea from modern theoretical physics, and define feature assignments as sections in a vector bundle over the structure space. With this idea in place, one can interpret the effect of environmental and operational variations as gauge degrees of freedom, as in modern gauge field theories. This paper will discuss the various geometrical structures required for an abstract theory of feature spaces in SHM, and will draw analogies with how these structures have shown their power in modern physics. In the second part of the paper, the problem of determining the normal condition cross section of a feature bundle is addressed. The solution is provided by the application of Graph Neural Networks (GNN), a versatile non-Euclidean machine learning algorithm which is not restricted to inputs and outputs from vector spaces. In particular, the algorithm is well suited to operating directly on the sort of graph structures which are an important part of the proposed framework for PBSHM. The solution of the normal section problem is demonstrated for a heterogeneous population of truss structures for which the feature of interest is the first natural frequency.
△ Less
Submitted 5 March, 2021;
originally announced March 2021.
-
Probabilistic Inference for Structural Health Monitoring: New Modes of Learning from Data
Authors:
Lawrence A. Bull,
Paul Gardner,
Timothy J. Rogers,
Elizabeth J. Cross,
Nikolaos Dervilis,
Keith Worden
Abstract:
In data-driven SHM, the signals recorded from systems in operation can be noisy and incomplete. Data corresponding to each of the operational, environmental, and damage states are rarely available a priori; furthermore, labelling to describe the measurements is often unavailable. In consequence, the algorithms used to implement SHM should be robust and adaptive, while accommodating for missing inf…
▽ More
In data-driven SHM, the signals recorded from systems in operation can be noisy and incomplete. Data corresponding to each of the operational, environmental, and damage states are rarely available a priori; furthermore, labelling to describe the measurements is often unavailable. In consequence, the algorithms used to implement SHM should be robust and adaptive, while accommodating for missing information in the training-data -- such that new information can be included if it becomes available. By reviewing novel techniques for statistical learning (introduced in previous work), it is argued that probabilistic algorithms offer a natural solution to the modelling of SHM data in practice. In three case-studies, probabilistic methods are adapted for applications to SHM signals -- including semi-supervised learning, active learning, and multi-task learning.
△ Less
Submitted 2 March, 2021;
originally announced March 2021.
-
A probabilistic risk-based decision framework for structural health monitoring
Authors:
Aidan J. Hughes,
Robert J. Barthorpe,
N. Dervilis,
Charles R. Farrar,
Keith Worden
Abstract:
Obtaining the ability to make informed decisions regarding the operation and maintenance of structures, provides a major incentive for the implementation of structural health monitoring (SHM) systems. Probabilistic risk assessment (PRA) is an established methodology that allows engineers to make risk-informed decisions regarding the design and operation of safety-critical and high-value assets in…
▽ More
Obtaining the ability to make informed decisions regarding the operation and maintenance of structures, provides a major incentive for the implementation of structural health monitoring (SHM) systems. Probabilistic risk assessment (PRA) is an established methodology that allows engineers to make risk-informed decisions regarding the design and operation of safety-critical and high-value assets in industries such as nuclear and aerospace. The current paper aims to formulate a risk-based decision framework for structural health monitoring that combines elements of PRA with the existing SHM paradigm. As an apt tool for reasoning and decision-making under uncertainty, probabilistic graphical models serve as the foundation of the framework. The framework involves modelling failure modes of structures as Bayesian network representations of fault trees and then assigning costs or utilities to the failure events. The fault trees allow for information to pass from probabilistic classifiers to influence diagram representations of decision processes whilst also providing nodes within the graphical model that may be queried to obtain marginal probability distributions over local damage states within a structure. Optimal courses of action for structures are selected by determining the strategies that maximise expected utility. The risk-based framework is demonstrated on a realistic truss-like structure and supported by experimental data. Finally, a discussion of the risk-based approach is made and further challenges pertaining to decision-making processes in the context of SHM are identified.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
Structured Machine Learning Tools for Modelling Characteristics of Guided Waves
Authors:
Marcus Haywood-Alexander,
Nikolaos Dervilis,
Keith Worden,
Elizabeth J. Cross,
Robin S. Mills,
Timothy J. Rogers
Abstract:
The use of ultrasonic guided waves to probe the materials/structures for damage continues to increase in popularity for non-destructive evaluation (NDE) and structural health monitoring (SHM). The use of high-frequency waves such as these offers an advantage over low-frequency methods from their ability to detect damage on a smaller scale. However, in order to assess damage in a structure, and imp…
▽ More
The use of ultrasonic guided waves to probe the materials/structures for damage continues to increase in popularity for non-destructive evaluation (NDE) and structural health monitoring (SHM). The use of high-frequency waves such as these offers an advantage over low-frequency methods from their ability to detect damage on a smaller scale. However, in order to assess damage in a structure, and implement any NDE or SHM tool, knowledge of the behaviour of a guided wave throughout the material/structure is important (especially when designing sensor placement for SHM systems). Determining this behaviour is extremely diffcult in complex materials, such as fibre-matrix composites, where unique phenomena such as continuous mode conversion takes place. This paper introduces a novel method for modelling the feature-space of guided waves in a composite material. This technique is based on a data-driven model, where prior physical knowledge can be used to create structured machine learning tools; where constraints are applied to provide said structure. The method shown makes use of Gaussian processes, a full Bayesian analysis tool, and in this paper it is shown how physical knowledge of the guided waves can be utilised in modelling using an ML tool. This paper shows that through careful consideration when applying machine learning techniques, more robust models can be generated which offer advantages such as extrapolation ability and physical interpretation.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
