-
Thickness dependence of the mechanical properties of piezoelectric high-$Q_m$ nanomechanical resonators made from aluminium nitride
Authors:
Anastasiia Ciers,
Alexander Jung,
Joachim Ciers,
Laurentius Radit Nindito,
Hannes Pfeifer,
Armin Dadgar,
Jürgen Bläsing,
André Strittmatter,
Witlef Wieczorek
Abstract:
Nanomechanical resonators with high quality factors (\Qm{}) enable mechanics-based quantum technologies, in particular quantum sensing and quantum transduction. High-\Qm{} nanomechanical resonators in the kHz to MHz frequency range can be realized in tensile-strained thin films that allow the use of dissipation dilution techniques to drastically increase \Qm{}. In our work, we study the material p…
▽ More
Nanomechanical resonators with high quality factors (\Qm{}) enable mechanics-based quantum technologies, in particular quantum sensing and quantum transduction. High-\Qm{} nanomechanical resonators in the kHz to MHz frequency range can be realized in tensile-strained thin films that allow the use of dissipation dilution techniques to drastically increase \Qm{}. In our work, we study the material properties of tensile-strained piezoelectric films made from aluminium nitride (AlN). We characterize crystalline AlN films with a thickness ranging from \SI{45}{\nano\meter} to \SI{295}{\nano\meter}, which are directly grown on Si(111) by metal-organic vapour-phase epitaxy. We report on the crystal quality and surface roughness, the piezoelectric response, and the residual and released stress of the AlN thin films. Importantly, we determine the intrinsic quality factor of the films at room temperature in high vacuum. We fabricate and characterize AlN nanomechanical resonators that exploit dissipation dilution to enhance the intrinsic quality factor by utilizing the tensile strain in the film. We find that AlN nanomechanical resonators below \SI{200}{\nano\meter} thickness exhibit the highest \Qf{}-product, on the order of $10^{12}$\,Hz. We discuss possible strategies to optimize the material growth that should lead to devices that reach even higher \Qf{}-products. This will pave the way for future advancements of optoelectromechanical quantum devices made from tensile-strained piezoelectric AlN.
△ Less
Submitted 13 January, 2025; v1 submitted 4 October, 2024;
originally announced October 2024.
-
Coherent feedback control for cavity optomechanical systems with a frequency-dependent mirror
Authors:
Lei Du,
Juliette Monsel,
Witlef Wieczorek,
Janine Splettstoesser
Abstract:
Ground-state cooling of mechanical resonators is a prerequisite for the observation of various quantum effects in optomechanical systems and thus has always been a crucial task in quantum optomechanics. In this paper, we study how to realize ground-state cooling of the mechanical mode in a Fano-mirror optomechanical setup, which allows for enhanced effective optomechanical interaction but typicall…
▽ More
Ground-state cooling of mechanical resonators is a prerequisite for the observation of various quantum effects in optomechanical systems and thus has always been a crucial task in quantum optomechanics. In this paper, we study how to realize ground-state cooling of the mechanical mode in a Fano-mirror optomechanical setup, which allows for enhanced effective optomechanical interaction but typically works in the (deeply) unresolved-sideband regime. We reveal that for such a two-sided cavity geometry with very different decay rates at the two cavity mirrors, it is possible to cool the mechanical mode down to its ground state within a broad range of parameters by using an appropriate single-sided coherent feedback. This is possible even if the total optical loss is more than seven orders of magnitude larger than the mechanical frequency and the feedback efficiency is relatively low. Importantly, we show that a more standard double-sided feedback scheme is not appropriate to cooperate with a Fano-mirror system.
△ Less
Submitted 10 January, 2025; v1 submitted 22 May, 2024;
originally announced May 2024.
-
Modelling magnetically-levitated superconducting ellipsoids, cylinders and cuboids for quantum magnetomechanics
Authors:
Natanael Bort-Soldevila,
Jaume Cunill-Subiranas,
Nuria Del-Valle,
Witlef Wieczorek,
Gerard Higgins,
Michael Trupke,
Carles Navau
Abstract:
We theoretically investigate the properties of magnetically-levitated superconducting rotors confined in anti-Helmholtz traps, for application in magnetomechanical experiments. We study both the translational modes and a librational mode. The librational mode gives an additional degree of freedom that levitated spheres do not have access to. We compare rotors of different shapes: ellipsoids, cylin…
▽ More
We theoretically investigate the properties of magnetically-levitated superconducting rotors confined in anti-Helmholtz traps, for application in magnetomechanical experiments. We study both the translational modes and a librational mode. The librational mode gives an additional degree of freedom that levitated spheres do not have access to. We compare rotors of different shapes: ellipsoids, cylinders and cuboids. We find that the stable orientations of the rotors depend on the rotors' aspect ratios.
△ Less
Submitted 8 April, 2024;
originally announced April 2024.
-
Nanomechanical crystalline AlN resonators with high quality factors for quantum optoelectromechanics
Authors:
Anastasiia Ciers,
Alexander Jung,
Joachim Ciers,
Laurentius Radit Nindito,
Hannes Pfeifer,
Armin Dadgar,
Andre Strittmatter,
Witlef Wieczorek
Abstract:
High-\Qm{} mechanical resonators are crucial for applications where low noise and long coherence time are required, as mirror suspensions, quantum cavity optomechanical devices, or nanomechanical sensors. Tensile strain in the material enables the use of dissipation dilution and strain engineering techniques, which increase the mechanical quality factor. These techniques have been employed for hig…
▽ More
High-\Qm{} mechanical resonators are crucial for applications where low noise and long coherence time are required, as mirror suspensions, quantum cavity optomechanical devices, or nanomechanical sensors. Tensile strain in the material enables the use of dissipation dilution and strain engineering techniques, which increase the mechanical quality factor. These techniques have been employed for high-\Qm{} mechanical resonators made from amorphous materials and, recently, from crystalline materials such as InGaP, SiC, and Si. A strained crystalline film exhibiting substantial piezoelectricity expands the capability of high-\Qm{} nanomechanical resonators to directly utilize electronic degrees of freedom. In this work we realize nanomechanical resonators with \Qm{} up to $2.9\times 10^{7}$ made from tensile-strained \SI{290}{\nano\meter}-thick AlN, which is an epitaxially-grown crystalline material offering strong piezoelectricity. We demonstrate nanomechanical resonators that exploit dissipation dilution and strain engineering to reach a \Qf-product approaching $10^{13}$\,\SI{}{\hertz} at room temperature. We realize a novel resonator geometry, triangline, whose shape follows the Al-N bonds and offers a central pad that we pattern with a photonic crystal. This allows us to reach an optical reflectivity above 80\% for efficient coupling to out-of-plane light. The presented results pave the way for quantum optoelectromechanical devices at room temperature based on tensile-strained AlN.
△ Less
Submitted 19 September, 2024; v1 submitted 19 February, 2024;
originally announced February 2024.
-
Dissipative and dispersive cavity optomechanics with a frequency-dependent mirror
Authors:
Juliette Monsel,
Anastasiia Ciers,
Sushanth Kini Manjeshwar,
Witlef Wieczorek,
Janine Splettstoesser
Abstract:
An optomechanical microcavity can considerably enhance the interaction between light and mechanical motion by confining light to a sub-wavelength volume. However, this comes at the cost of an increased optical loss rate. Therefore, microcavity-based optomechanical systems are placed in the unresolved-sideband regime, preventing sideband-based ground-state cooling. A pathway to reduce optical loss…
▽ More
An optomechanical microcavity can considerably enhance the interaction between light and mechanical motion by confining light to a sub-wavelength volume. However, this comes at the cost of an increased optical loss rate. Therefore, microcavity-based optomechanical systems are placed in the unresolved-sideband regime, preventing sideband-based ground-state cooling. A pathway to reduce optical loss in such systems is to engineer the cavity mirrors, i.e., the optical modes that interact with the mechanical resonator. In our work, we analyze such an optomechanical system, whereby one of the mirrors is strongly frequency-dependent, i.e., a suspended Fano mirror. This optomechanical system consists of two optical modes that couple to the motion of the suspended Fano mirror. We formulate a quantum-coupled-mode description that includes both the standard dispersive optomechanical coupling as well as dissipative coupling. We solve the Langevin equations of the system dynamics in the linear regime showing that ground-state cooling from room temperature can be achieved even if the cavity is per se not in the resolved-sideband regime, but achieves effective sideband resolution through strong optical mode coupling. Importantly, we find that the cavity output spectrum needs to be properly analyzed with respect to the effective laser detuning to infer the phonon occupation of the mechanical resonator. Our work also predicts how to reach the regime of nonlinear quantum optomechanics in a Fano-based microcavity by engineering the properties of the Fano mirror.
△ Less
Submitted 6 March, 2024; v1 submitted 26 November, 2023;
originally announced November 2023.
-
Quasibound states in the continuum in photonic-crystal-based optomechanical microcavities
Authors:
Cindy Péralle,
Sushanth Kini Manjeshwar,
Anastasiia Ciers,
Witlef Wieczorek,
Philippe Tassin
Abstract:
We present a detailed study of mechanically compliant, photonic-crystal-based microcavities featuring a quasi-bound state in the continuum. Such systems have recently been predicted to reduce the optical loss in Fabry-Perot-type optomechanical cavities. However, they require two identical photonic-crystal slabs facing each other, which poses a considerable challenge for experimental implementation…
▽ More
We present a detailed study of mechanically compliant, photonic-crystal-based microcavities featuring a quasi-bound state in the continuum. Such systems have recently been predicted to reduce the optical loss in Fabry-Perot-type optomechanical cavities. However, they require two identical photonic-crystal slabs facing each other, which poses a considerable challenge for experimental implementation. We investigate how such an ideal system can be simplified and still exhibit a quasi-bound state in the continuum. We find that a suspended photonic-crystal slab facing a distributed Bragg reflector realizes an optomechanical system with a quasi-bound state in the continuum. In this system, the radiative cavity loss can be eliminated to the extent that the cavity loss is dominated by dissipative loss originating from material absorption only. These proposed optomechanical cavity designs are predicted to feature optical quality factors in excess of 10^5.
△ Less
Submitted 30 December, 2023; v1 submitted 30 June, 2023;
originally announced June 2023.
-
Integrated microcavity optomechanics with a suspended photonic crystal mirror above a distributed Bragg reflector
Authors:
Sushanth Kini Manjeshwar,
Anastasiia Ciers,
Juliette Monsel,
Hannes Pfeifer,
Cindy Peralle,
Shu Min Wang,
Philippe Tassin,
Witlef Wieczorek
Abstract:
Increasing the interaction between light and mechanical resonators is an ongoing endeavor in the field of cavity optomechanics. Optical microcavities allow for boosting the interaction strength through their strong spatial confinement of the optical field. In this work, we follow this approach by realizing a sub-wavelength-long, free-space optomechanical microcavity on-chip fabricated from an (Al,…
▽ More
Increasing the interaction between light and mechanical resonators is an ongoing endeavor in the field of cavity optomechanics. Optical microcavities allow for boosting the interaction strength through their strong spatial confinement of the optical field. In this work, we follow this approach by realizing a sub-wavelength-long, free-space optomechanical microcavity on-chip fabricated from an (Al,Ga)As heterostructure. A suspended GaAs photonic crystal mirror is acting as a highly reflective mechanical resonator, which together with a distributed Bragg reflector forms an optomechanical microcavity. We demonstrate precise control over the microcavity resonance by change of the photonic crystal parameters. The interplay between the microcavity mode and a guided resonance of the photonic crystal modifies the cavity response and results in a stronger dynamical backaction on the mechanical resonator compared to conventional optomechanical dynamics.
△ Less
Submitted 22 May, 2023;
originally announced May 2023.
-
High-Q trampoline resonators from strained crystalline InGaP for integrated free-space optomechanics
Authors:
Sushanth Kini Manjeshwar,
Anastasiia Ciers,
Fia Hellman,
Jürgen Bläsing,
André Strittmater,
Witlef Wieczorek
Abstract:
Tensile-strained materials have been used to fabricate nano- and micromechanical resonators with ultra-low mechanical dissipation in the kHz to MHz frequency range. These mechanical resonators are of particular interest for force sensing applications and quantum optomechanics at room temperature. Tensile-strained crystalline materials that are compatible with epitaxial growth of heterostructures w…
▽ More
Tensile-strained materials have been used to fabricate nano- and micromechanical resonators with ultra-low mechanical dissipation in the kHz to MHz frequency range. These mechanical resonators are of particular interest for force sensing applications and quantum optomechanics at room temperature. Tensile-strained crystalline materials that are compatible with epitaxial growth of heterostructures would thereby allow realizing monolithic free-space optomechanical devices, which benefit from stability, ultra-small mode volumes, and scalability. In our work, we demonstrate string- and trampoline resonators made from tensile-strained InGaP, which is a crystalline material that can be epitaxially grown on an AlGaAs heterostructure. The strain of the InGaP layer is defined via its Ga content when grown on (Al,Ga)As. In our case, we realize devices with a stress of up to 470\,MPa along the $[1\,1\,0]$ crystal direction. We characterize the mechanical properties of the suspended InGaP devices, such as anisotropic stress, yield strength, and intrinsic quality factor. We find that the latter degrades over time. We reach mechanical quality factors surpassing $10^7$ at room temperature with a $Q\cdot f$-product as high as $7\cdot10^{11}\,$Hz with trampoline-shaped micromechanical resonators, which exploit strain engineering to dilute mechanical dissipation. The large area of the suspended trampoline resonator allows us to pattern a photonic crystal to engineer its out-of-plane reflectivity in the telecom band, which is desired for efficient signal transduction of mechanical motion to light. Stabilization of the intrinsic quality factor together with a further reduction of mechanical dissipation through hierarchical clamping or machine learning-based optimization methods paves the way for integrated free-space quantum optomechanics at room temperature in a crystalline material platform.
△ Less
Submitted 2 July, 2023; v1 submitted 22 November, 2022;
originally announced November 2022.
-
High-Q magnetic levitation and control of superconducting microspheres at millikelvin temperatures
Authors:
Joachim Hofer,
Rudolf Gross,
Gerard Higgins,
Hans Huebl,
Oliver F. Kieler,
Reinhold Kleiner,
Dieter Koelle,
Philip Schmidt,
Joshua A. Slater,
Michael Trupke,
Kevin Uhl,
Thomas Weimann,
Witlef Wieczorek,
Markus Aspelmeyer
Abstract:
We report the levitation of a superconducting lead-tin sphere with 100 micrometer diameter (corresponding to a mass of 5.6 micrograms) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 hertz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well…
▽ More
We report the levitation of a superconducting lead-tin sphere with 100 micrometer diameter (corresponding to a mass of 5.6 micrograms) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 hertz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well as optically and exhibits quality factors of up to 2.6e7. We also demonstrate 3D magnetic feedback control of the sphere's motion. The setup is housed in a dilution refrigerator operating at 15 millikelvin. By implementing a cryogenic vibration isolation system we can attenuate environmental vibrations at 200 hertz by approximately seven orders of magnitude. The combination of low temperature, large mass and high quality factor as well as adjustable resonance frequencies provides a promising platform for testing quantum physics in previously unexplored regimes with high mass and long coherence times.
△ Less
Submitted 1 August, 2023; v1 submitted 11 November, 2022;
originally announced November 2022.
-
Superconducting microsphere magnetically levitated in an anharmonic potential with integrated magnetic readout
Authors:
Martí Gutierrez Latorre,
Gerard Higgins,
Achintya Paradkar,
Thilo Bauch,
Witlef Wieczorek
Abstract:
Magnetically levitated superconducting microparticles offer a promising path to quantum experiments with picogram to microgram objects. In this work, we levitate a 700ng $\sim 10^{17}$amu superconducting microsphere in a magnetic chip trap in which detection is integrated. We measure the particle's center-of-mass motion using a DC-SQUID magnetometer. The trap frequencies are continuously tunable b…
▽ More
Magnetically levitated superconducting microparticles offer a promising path to quantum experiments with picogram to microgram objects. In this work, we levitate a 700ng $\sim 10^{17}$amu superconducting microsphere in a magnetic chip trap in which detection is integrated. We measure the particle's center-of-mass motion using a DC-SQUID magnetometer. The trap frequencies are continuously tunable between 30 and 160 Hz and the particle remains stably trapped over days in a dilution refrigerator environment. We characterize motional-amplitude-dependent frequency shifts, which arise from trap anharmonicities, namely Duffing nonlinearities and mode couplings. We explain this nonlinear behavior using finite element modelling of the chip-based trap potential. This work constitutes a first step towards quantum experiments and ultrasensitive inertial sensors with magnetically levitated superconducting microparticles.
△ Less
Submitted 1 June, 2023; v1 submitted 24 October, 2022;
originally announced October 2022.
-
A chip-based superconducting magnetic trap for levitating superconducting microparticles
Authors:
Martí Gutierrez Latorre,
Achintya Paradkar,
David Hambraeus,
Gerard Higgins,
Witlef Wieczorek
Abstract:
Magnetically-levitated superconducting microparticles have been recently proposed as a promising platform for performing quantum experiments with particles in the picogram regime. Here, we demonstrate the superconducting technology to achieve chip-based magnetic levitation of superconducting microparticles. We simulate and fabricate a chip-based magnetic trap capable of levitating superconducting…
▽ More
Magnetically-levitated superconducting microparticles have been recently proposed as a promising platform for performing quantum experiments with particles in the picogram regime. Here, we demonstrate the superconducting technology to achieve chip-based magnetic levitation of superconducting microparticles. We simulate and fabricate a chip-based magnetic trap capable of levitating superconducting particles with diameters from 0.5$\,μ$m to 200$\,μ$m. The trap consists of two stacked silicon chips, each patterned with a planar multi-winding superconducting coil made of niobium. The two coils generate a magnetic field resembling a quadrupole near the trap center, in which we demonstrate trapping of a spherical 50\,$μ$m diameter SnPb microparticle at temperatures of 4\,K and 40\,mK.
△ Less
Submitted 9 March, 2022; v1 submitted 30 September, 2021;
originally announced September 2021.
-
Optomechanical cooling with coherent and squeezed light: the thermodynamic cost of opening the heat valve
Authors:
Juliette Monsel,
Nastaran Dashti,
Sushanth Kini Manjeshwar,
Jakob Eriksson,
Henric Ernbrink,
Ebba Olsson,
Emelie Torneus,
Witlef Wieczorek,
Janine Splettstoesser
Abstract:
Ground-state cooling of mechanical motion by coupling to a driven optical cavity has been demonstrated in various optomechanical systems. In our work, we provide a so far missing thermodynamic performance analysis of optomechanical sideband cooling in terms of a heat valve. As performance quantifiers, we examine not only the lowest reachable effective temperature (phonon number) but also the evacu…
▽ More
Ground-state cooling of mechanical motion by coupling to a driven optical cavity has been demonstrated in various optomechanical systems. In our work, we provide a so far missing thermodynamic performance analysis of optomechanical sideband cooling in terms of a heat valve. As performance quantifiers, we examine not only the lowest reachable effective temperature (phonon number) but also the evacuated-heat flow as an equivalent to the cooling power of a standard refrigerator, as well as appropriate thermodynamic efficiencies, which all can be experimentally inferred from measurements of the cavity output light field. Importantly, in addition to the standard optomechanical setup fed by coherent light, we investigate two recent alternative setups for achieving ground-state cooling: replacing the coherent laser drive by squeezed light or using a cavity with a frequency-dependent (Fano) mirror. We study the dynamics of these setups within and beyond the weak-coupling limit and give concrete examples based on parameters of existing experimental systems. By applying our thermodynamic framework, we gain detailed insights into these three different optomechanical cooling setups, allowing a comprehensive understanding of the thermodynamic mechanisms at play.
△ Less
Submitted 18 May, 2021; v1 submitted 5 March, 2021;
originally announced March 2021.
-
Cavity Optomechanics with Photonic Bound States in the Continuum
Authors:
Jamie M. Fitzgerald,
Sushanth Kini Manjeshwar,
Witlef Wieczorek,
Philippe Tassin
Abstract:
We propose a versatile, free-space cavity optomechanics platform built from two photonic crystal membranes, one of which is freely suspended, and designed to form a microcavity less than one wavelength long. This cavity features a series of photonic bound states in the continuum that, in principle, trap light forever and can be favorably used together with evanescent coupling for realizing various…
▽ More
We propose a versatile, free-space cavity optomechanics platform built from two photonic crystal membranes, one of which is freely suspended, and designed to form a microcavity less than one wavelength long. This cavity features a series of photonic bound states in the continuum that, in principle, trap light forever and can be favorably used together with evanescent coupling for realizing various types of optomechanical couplings, such as linear or quadratic coupling of either dispersive or dissipative type, by tuning the photonic crystal patterning and cavity length. Crucially, this platform allows for a quantum cooperativity exceeding unity in the ultrastrong single-photon coupling regime, surpassing the performance of conventional Fabry-Perot-based cavity optomechanical devices in the non-resolved sideband regime. This conceptually novel platform allows for exploring new regimes of the optomechanical interaction, in particular in the framework of pulsed and single-photon optomechanics.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
Suspended photonic crystal membranes in AlGaAs heterostructures for integrated multi-element optomechanics
Authors:
Sushanth Kini Manjeshwar,
Karim Elkhouly,
Jamie M. Fitzgerald,
Martin Ekman,
Yanchao Zhang,
Fan Zhang,
Shu Min Wang,
Philippe Tassin,
Witlef Wieczorek
Abstract:
We present high-reflectivity mechanical resonators fabricated from AlGaAs heterostructures for use in free-space optical cavities operating in the telecom wavelength regime. The mechanical resonators are fabricated in slabs of GaAs and patterned with a photonic crystal to increase their out-of-plane reflectivity. Characterization of the mechanical modes reveals residual tensile stress in the GaAs…
▽ More
We present high-reflectivity mechanical resonators fabricated from AlGaAs heterostructures for use in free-space optical cavities operating in the telecom wavelength regime. The mechanical resonators are fabricated in slabs of GaAs and patterned with a photonic crystal to increase their out-of-plane reflectivity. Characterization of the mechanical modes reveals residual tensile stress in the GaAs device layer. This stress results in higher mechanical frequencies than in unstressed GaAs and can be used for strain engineering of mechanical dissipation. Simultaneously, we find that the finite waist of the incident optical beam leads to a dip in the reflectance spectrum. This feature originates from coupling to a guided resonance of the photonic crystal, an effect that must be taken into account when designing slabs of finite size. The single- and sub-$\upmu$m-spaced double-layer slabs demonstrated here can be directly fabricated on top of a distributed Bragg reflector mirror in the same material platform. Such a platform opens a route for realizing integrated multi-element cavity optomechanical devices and optomechanical microcavities on chip.
△ Less
Submitted 28 August, 2020; v1 submitted 26 April, 2020;
originally announced April 2020.
-
Chip-based superconducting traps for levitation of micrometer-sized particles in the Meissner state
Authors:
Martí Gutierrez Latorre,
Joachim Hofer,
Matthias Rudolph,
Witlef Wieczorek
Abstract:
We present a detailed analysis of two chip-based superconducting trap architectures capable of levitating micrometer-sized superconducting particles in the Meissner state. These architectures are suitable for performing novel quantum experiments with more massive particles or for force and acceleration sensors of unprecedented sensitivity. We focus in our work on a chip-based anti-Helmholtz coil-t…
▽ More
We present a detailed analysis of two chip-based superconducting trap architectures capable of levitating micrometer-sized superconducting particles in the Meissner state. These architectures are suitable for performing novel quantum experiments with more massive particles or for force and acceleration sensors of unprecedented sensitivity. We focus in our work on a chip-based anti-Helmholtz coil-type trap (AHC) and a planar double-loop (DLP) trap. We demonstrate their fabrication from superconducting Nb films and the fabrication of superconducting particles from Nb or Pb. We apply finite element modeling (FEM) to analyze these two trap architectures in detail with respect to trap stability and frequency. Crucially, in FEM we account for the complete three-dimensional geometry of the traps, finite magnetic field penetration into the levitated superconducting particle, demagnetizing effects, and flux quantization. We can, thus, analyze trap properties beyond assumptions made in analytical models. We find that realistic AHC traps yield trap frequencies well above 10kHz for levitation of micrometer-sized particles and can be fabricated with a three-layer process, while DL traps enable trap frequencies below 1kHz and are simpler to fabricate in a single-layer process. Our numerical results guide future experiments aiming at levitating micrometer-sized particles in the Meissner state with chip-based superconducting traps. The modeling we use is also applicable in other scenarios using superconductors in the Meissner state, such as for designing superconducting magnetic shields or for calculating filling factors in superconducting resonators.
△ Less
Submitted 28 August, 2020; v1 submitted 10 February, 2020;
originally announced February 2020.
-
Stationary optomechanical entanglement between a mechanical oscillator and its measurement apparatus
Authors:
C. Gut,
K. Winkler,
J. Hoelscher-Obermaier,
S. G. Hofer,
R. Moghadas Nia,
N. Walk,
A. Steffens,
J. Eisert,
W. Wieczorek,
J. A. Slater,
M. Aspelmeyer,
K. Hammerer
Abstract:
We provide an argument to infer stationary entanglement between light and a mechanical oscillator based on continuous measurement of light only. We propose an experimentally realizable scheme involving an optomechanical cavity driven by a resonant, continuous-wave field operating in the non-sideband-resolved regime. This corresponds to the conventional configuration of an optomechanical position o…
▽ More
We provide an argument to infer stationary entanglement between light and a mechanical oscillator based on continuous measurement of light only. We propose an experimentally realizable scheme involving an optomechanical cavity driven by a resonant, continuous-wave field operating in the non-sideband-resolved regime. This corresponds to the conventional configuration of an optomechanical position or force sensor. We show analytically that entanglement between the mechanical oscillator and the output field of the optomechanical cavity can be inferred from the measurement of squeezing in (generalized) Einstein-Podolski-Rosen quadratures of suitable temporal modes of the stationary light field. Squeezing can reach levels of up to 50% of noise reduction below shot noise in the limit of large quantum cooperativity. Remarkably, entanglement persists even in the opposite limit of small cooperativity. Viewing the optomechanical device as a position sensor, entanglement between mechanics and light is an instance of object-apparatus entanglement predicted by quantum measurement theory.
△ Less
Submitted 13 August, 2020; v1 submitted 3 December, 2019;
originally announced December 2019.
-
Optimal Control of Hybrid Optomechanical Systems for Generating Non-Classical States of Mechanical Motion
Authors:
Ville Bergholm,
Witlef Wieczorek,
Thomas Schulte-Herbrueggen,
Michael Keyl
Abstract:
Cavity optomechanical systems are one of the leading experimental platforms for controlling mechanical motion in the quantum regime. We exemplify that the control over cavity optomechanical systems greatly increases by coupling the cavity also to a two-level system, thereby creating a hybrid optomechanical system. If the two-level system can be driven largely independently of the cavity, we show t…
▽ More
Cavity optomechanical systems are one of the leading experimental platforms for controlling mechanical motion in the quantum regime. We exemplify that the control over cavity optomechanical systems greatly increases by coupling the cavity also to a two-level system, thereby creating a hybrid optomechanical system. If the two-level system can be driven largely independently of the cavity, we show that the non-linearity thus introduced enables us to steer the extended system to non-classical target states of the mechanical oscillator with Wigner functions exhibiting significant negative regions. We illustrate how to use optimal control techniques beyond the linear regime to drive the hybrid system from the near ground state into a Fock target state of the mechanical oscillator. We base our numerical optimization on realistic experimental parameters for exemplifying how optimal control enables the preparation of decidedly non-classical target states, where naive control schemes fail. Our results thus pave the way for applying the toolbox of optimal control in hybrid optomechanical systems for generating non-classical mechanical states.
△ Less
Submitted 4 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Electro-mechanical Casimir effect
Authors:
Mikel Sanz,
Witlef Wieczorek,
Simon Gröblacher,
Enrique Solano
Abstract:
The dynamical Casimir effect is an intriguing phenomenon in which photons are generated from vacuum due to a non-adiabatic change in some boundary conditions. In particular, it connects the motion of an accelerated mechanical mirror to the generation of photons. While pioneering experiments demonstrating this effect exist, a conclusive measurement involving a mechanical generation is still missing…
▽ More
The dynamical Casimir effect is an intriguing phenomenon in which photons are generated from vacuum due to a non-adiabatic change in some boundary conditions. In particular, it connects the motion of an accelerated mechanical mirror to the generation of photons. While pioneering experiments demonstrating this effect exist, a conclusive measurement involving a mechanical generation is still missing. We show that a hybrid system consisting of a piezoelectric mechanical resonator coupled to a superconducting cavity may allow to electro-mechanically generate measurable photons from vacuum, intrinsically associated to the dynamical Casimir effect. Such an experiment may be achieved with current technology, based on film bulk acoustic resonators directly coupled to a superconducting cavity. Our results predict a measurable photon generation rate, which can be further increased through additional improvements such as using superconducting metamaterials.
△ Less
Submitted 29 August, 2018; v1 submitted 21 December, 2017;
originally announced December 2017.
-
Interferometric autocorrelation in the ultra-violet utilizing spontaneous parametric down-conversion
Authors:
Patrick Michelberger,
Roland Krischek,
Witlef Wieczorek,
Akira Ozawa,
Harald Weinfurter
Abstract:
Autocorrelation is a common method to estimate the duration of ultra-short laser pulses. In the ultra-violet (UV) regime it is increasingly challenging to employ the standard process of second harmonic generation, most prominently due to absorption in nonlinear crystals at very short wavelengths. Here we show how to utilize spontaneous parametric down-conversion (SPDC) to generate an autocorrelati…
▽ More
Autocorrelation is a common method to estimate the duration of ultra-short laser pulses. In the ultra-violet (UV) regime it is increasingly challenging to employ the standard process of second harmonic generation, most prominently due to absorption in nonlinear crystals at very short wavelengths. Here we show how to utilize spontaneous parametric down-conversion (SPDC) to generate an autocorrelation signal for UV pulses in the infrared. Our method utilizes the $n^{\text{th}}$ order emission of the SPDC process, which occurs for low pumping powers proportional to the $n^{\text{th}}$ power of the UV intensity. Thus, counting $2n$ down-converted photons directly yields the $n^{\text{th}}$-order autocorrelation. The method, now with detection of near infrared photons with high efficiency, is applied here to the first direct measurement of ultra-short UV-pulses (approximately $176\, \text{fs}$, center wavelength $390\, \text{nm}$) inside a UV enhancement cavity.
△ Less
Submitted 4 June, 2017;
originally announced June 2017.
-
Ultrasensitive Inertial and Force Sensors with Diamagnetically Levitated Magnets
Authors:
J. Prat-Camps,
C. Teo,
C. C. Rusconi,
W. Wieczorek,
O. Romero-Isart
Abstract:
We theoretically show that a magnet can be stably levitated on top of a punctured superconductor sheet in the Meissner state without applying any external field. The trapping potential created by such induced-only superconducting currents is characterized for magnetic spheres ranging from tens of nanometers to tens of millimeters. Such a diamagnetically levitated magnet is predicted to be extremel…
▽ More
We theoretically show that a magnet can be stably levitated on top of a punctured superconductor sheet in the Meissner state without applying any external field. The trapping potential created by such induced-only superconducting currents is characterized for magnetic spheres ranging from tens of nanometers to tens of millimeters. Such a diamagnetically levitated magnet is predicted to be extremely well isolated from the environment. We therefore propose to use it as an ultrasensitive force and inertial sensor. A magnetomechanical read-out of its displacement can be performed by using superconducting quantum interference devices. An analysis using current technology shows that force and acceleration sensitivities on the order of $10^{-23}\text{N}/\sqrt{\text{Hz}}$ (for a 100 nm magnet) and $10^{-14}g/\sqrt{\text{Hz}}$ (for a 10 mm magnet) might be within reach in a cryogenic environment. Such unprecedented sensitivities can be used for a variety of purposes, from designing ultra-sensitive inertial sensors for technological applications (i.e. gravimetry, avionics, and space industry), to scientific investigations on measuring Casimir forces of magnetic origin and gravitational physics.
△ Less
Submitted 1 March, 2017;
originally announced March 2017.
-
Experimental determination of irreversible entropy production in out-of-equilibrium mesoscopic quantum systems
Authors:
M. Brunelli,
L. Fusco,
R. Landig,
W. Wieczorek,
J. Hoelscher-Obermaier,
G. Landi,
F. L. Semiao,
A. Ferraro,
N. Kiesel,
T. Donner,
G. De Chiara,
M. Paternostro
Abstract:
By making use of a recently proposed framework for the inference of thermodynamic irreversibility in bosonic quantum systems, we experimentally measure and characterize the entropy production rates in the non-equilibrium steady state of two different physical systems -- a micro-mechanical resonator and a Bose-Einstein condensate -- each coupled to a high finesse cavity and hence also subject to op…
▽ More
By making use of a recently proposed framework for the inference of thermodynamic irreversibility in bosonic quantum systems, we experimentally measure and characterize the entropy production rates in the non-equilibrium steady state of two different physical systems -- a micro-mechanical resonator and a Bose-Einstein condensate -- each coupled to a high finesse cavity and hence also subject to optical loss. Key features of our setups, such as cooling of the mechanical resonator and signatures of a structural quantum phase transition in the condensate are reflected in the entropy production rates. Our work demonstrates the possibility to explore irreversibility in driven mesoscopic quantum systems and paves the way to a systematic experimental assessment of entropy production beyond the microscopic limit.
△ Less
Submitted 17 September, 2018; v1 submitted 22 February, 2016;
originally announced February 2016.
-
Optimal state estimation for cavity optomechanical systems
Authors:
Witlef Wieczorek,
Sebastian G. Hofer,
Jason Hoelscher-Obermaier,
Ralf Riedinger,
Klemens Hammerer,
Markus Aspelmeyer
Abstract:
We demonstrate optimal state estimation for a cavity optomechanical system through Kalman filtering. By taking into account nontrivial experimental noise sources, such as colored laser noise and spurious mechanical modes, we implement a realistic state-space model. This allows us to obtain the conditional system state, i.e., conditioned on previous measurements, with minimal least-square estimatio…
▽ More
We demonstrate optimal state estimation for a cavity optomechanical system through Kalman filtering. By taking into account nontrivial experimental noise sources, such as colored laser noise and spurious mechanical modes, we implement a realistic state-space model. This allows us to obtain the conditional system state, i.e., conditioned on previous measurements, with minimal least-square estimation error. We apply this method for estimating the mechanical state, as well as optomechanical correlations both in the weak and strong coupling regime. The application of the Kalman filter is an important next step for achieving real-time optimal (classical and quantum) control of cavity optomechanical systems.
△ Less
Submitted 10 June, 2015; v1 submitted 5 May, 2015;
originally announced May 2015.
-
Tensile strained $In_{x}Ga_{1-x}P$ membranes for cavity optomechanics
Authors:
G. D. Cole,
P. -L. Yu,
C. Gärtner,
K. Siquans,
R. Moghadas Nia,
J. Schmöle,
J. Hoelscher-Obermaier,
T. P. Purdy,
W. Wieczorek,
C. A. Regal,
M. Aspelmeyer
Abstract:
We investigate the optomechanical properties of tensile-strained ternary InGaP nanomembranes grown on GaAs. This material system combines the benefits of highly strained membranes based on stoichiometric silicon nitride, with the unique properties of thin-film semiconductor single crystals, as previously demonstrated with suspended GaAs. Here we employ lattice mismatch in epitaxial growth to impar…
▽ More
We investigate the optomechanical properties of tensile-strained ternary InGaP nanomembranes grown on GaAs. This material system combines the benefits of highly strained membranes based on stoichiometric silicon nitride, with the unique properties of thin-film semiconductor single crystals, as previously demonstrated with suspended GaAs. Here we employ lattice mismatch in epitaxial growth to impart an intrinsic tensile strain to a monocrystalline thin film (approximately 30 nm thick). These structures exhibit mechanical quality factors of 2*10^6 or beyond at room temperature and 17 K for eigenfrequencies up to 1 MHz, yielding Q*f products of 2*10^12 Hz for a tensile stress of ~170 MPa. Incorporating such membranes in a high finesse Fabry-Perot cavity, we extract an upper limit to the total optical loss (including both absorption and scatter) of 40 ppm at 1064 nm and room temperature. Further reductions of the In content of this alloy will enable tensile stress levels of 1 GPa, with the potential for a significant increase in the Q*f product, assuming no deterioration in the mechanical loss at this composition and strain level. This materials system is a promising candidate for the integration of strained semiconductor membrane structures with low-loss semiconductor mirrors and for realizing stacks of membranes for enhanced optomechanical coupling.
△ Less
Submitted 31 March, 2014;
originally announced April 2014.
-
Highly efficient heralding of entangled single photons
Authors:
Sven Ramelow,
Alexandra Mech,
Marissa Giustina,
Simon Groeblacher,
Witlef Wieczorek,
Adriana Lita,
Brice Calkins,
Thomas Gerrits,
Sae Woo Nam,
Anton Zeilinger,
Rupert Ursin
Abstract:
Single photons are an important prerequisite for a broad spectrum of quantum optical applications. We experimentally demonstrate a heralded single-photon source based on spontaneous parametric down-conversion in collinear bulk optics, and fiber-coupled bolometric transition-edge sensors. Without correcting for background, losses, or detection inefficiencies, we measure an overall heralding efficie…
▽ More
Single photons are an important prerequisite for a broad spectrum of quantum optical applications. We experimentally demonstrate a heralded single-photon source based on spontaneous parametric down-conversion in collinear bulk optics, and fiber-coupled bolometric transition-edge sensors. Without correcting for background, losses, or detection inefficiencies, we measure an overall heralding efficiency of 83 %. By violating a Bell inequality, we confirm the single-photon character and high-quality entanglement of our heralded single photons which, in combination with the high heralding efficiency, are a necessary ingredient for advanced quantum communication protocols such as one-sided device-independent quantum key distribution.
△ Less
Submitted 22 November, 2012; v1 submitted 21 November, 2012;
originally announced November 2012.
-
Useful Multiparticle Entanglement and Sub-Shot-Noise Sensitivity in Experimental Phase Estimation
Authors:
Roland Krischek,
Christian Schwemmer,
Witlef Wieczorek,
Harald Weinfurter,
Philipp Hyllus,
Luca Pezzé,
Augusto Smerzi
Abstract:
We experimentally demonstrate a general criterion to identify entangled states useful for the estimation of an unknown phase shift with a sensitivity higher than the shot-noise limit. We show how to exploit this entanglement on the examples of a maximum likelihood as well as of a Bayesian phase estimation protocol. Using an entangled four-photon state we achieve a phase sensitivity clearly beyond…
▽ More
We experimentally demonstrate a general criterion to identify entangled states useful for the estimation of an unknown phase shift with a sensitivity higher than the shot-noise limit. We show how to exploit this entanglement on the examples of a maximum likelihood as well as of a Bayesian phase estimation protocol. Using an entangled four-photon state we achieve a phase sensitivity clearly beyond the shot-noise limit. Our detailed comparison of methods and quantum states for entanglement enhanced metrology reveals the connection between multiparticle entanglement and sub-shot-noise uncertainty, both in a frequentist and in a Bayesian phase estimation setting.
△ Less
Submitted 30 August, 2011;
originally announced August 2011.
-
Quantum entanglement and teleportation in pulsed cavity-optomechanics
Authors:
Sebastian G. Hofer,
Witlef Wieczorek,
Markus Aspelmeyer,
Klemens Hammerer
Abstract:
Entangling a mechanical oscillator with an optical mode is an enticing and yet a very challenging goal in cavity optomechanics. Here we consider a pulsed scheme to create Einstein-Podolsky-Rosen-type entanglement between a traveling-wave light pulse and a mechanical oscillator. The entanglement can be verified unambiguously by a pump-probe sequence of pulses. In contrast to schemes that work in a…
▽ More
Entangling a mechanical oscillator with an optical mode is an enticing and yet a very challenging goal in cavity optomechanics. Here we consider a pulsed scheme to create Einstein-Podolsky-Rosen-type entanglement between a traveling-wave light pulse and a mechanical oscillator. The entanglement can be verified unambiguously by a pump-probe sequence of pulses. In contrast to schemes that work in a steady-state regime under a continuous-wave drive, this protocol is not subject to stability requirements that normally limit the strength of achievable entanglement. We investigate the protocol's performance under realistic conditions, including mechanical decoherence, in full detail. We discuss the relevance of a high mechanical Qf product for entanglement creation and provide a quantitative statement on which magnitude of the Qf product is necessary for a successful realization of the scheme. We determine the optimal parameter regime for its operation and show it to work in current state-of-the-art systems.
△ Less
Submitted 24 November, 2011; v1 submitted 12 August, 2011;
originally announced August 2011.
-
Pulsed Laser Cooling for Cavity-Optomechanical Resonators
Authors:
Shai Machnes,
Javier Cerrillo,
Markus Aspelmeyer,
Witlef Wieczorek,
Martin B. Plenio,
Alex Retzker
Abstract:
A pulsed cooling scheme for optomechanical systems is presented that is capable of cooling at much faster rates, shorter overall cooling times, and for a wider set of experimental scenarios than is possible by conventional methods. The proposed scheme can be implemented for both strongly and weakly coupled optomechanical systems in both weakly and highly dissipative cavities. We study analytically…
▽ More
A pulsed cooling scheme for optomechanical systems is presented that is capable of cooling at much faster rates, shorter overall cooling times, and for a wider set of experimental scenarios than is possible by conventional methods. The proposed scheme can be implemented for both strongly and weakly coupled optomechanical systems in both weakly and highly dissipative cavities. We study analytically its underlying working mechanism, which is based on interferometric control of optomechanical interactions, and we demonstrate its efficiency with pulse sequences that are obtained by using methods from optimal control. The short time in which our scheme approaches the optomechanical ground state allows for a significant relaxation of current experimental constraints. Finally, the framework presented here can be used to create a rich variety of optomechanical interactions and hence offers a novel, readily available toolbox for fast optomechanical quantum control.
△ Less
Submitted 12 April, 2012; v1 submitted 28 April, 2011;
originally announced April 2011.
-
Fisher information and multiparticle entanglement
Authors:
Philipp Hyllus,
Wiesław Laskowski,
Roland Krischek,
Christian Schwemmer,
Witlef Wieczorek,
Harald Weinfurter,
Luca Pezzé,
Augusto Smerzi
Abstract:
The Fisher information $F$ gives a limit to the ultimate precision achievable in a phase estimation protocol. It has been shown recently that the Fisher information for a linear two-mode interferometer cannot exceed the number of particles if the input state is separable. As a direct consequence, with such input states the shot-noise limit is the ultimate limit of precision. In this work, we go a…
▽ More
The Fisher information $F$ gives a limit to the ultimate precision achievable in a phase estimation protocol. It has been shown recently that the Fisher information for a linear two-mode interferometer cannot exceed the number of particles if the input state is separable. As a direct consequence, with such input states the shot-noise limit is the ultimate limit of precision. In this work, we go a step further by deducing bounds on $F$ for several multiparticle entanglement classes. These bounds imply that genuine multiparticle entanglement is needed for reaching the highest sensitivities in quantum interferometry. We further compute similar bounds on the average Fisher information $\bar F$ for collective spin operators, where the average is performed over all possible spin directions. We show that these criteria detect different sets of states and illustrate their strengths by considering several examples, also using experimental data. In particular, the criterion based on $\bar F$ is able to detect certain bound entangled states.
△ Less
Submitted 20 February, 2012; v1 submitted 22 June, 2010;
originally announced June 2010.
-
Permutationally invariant quantum tomography
Authors:
Geza Toth,
Witlef Wieczorek,
David Gross,
Roland Krischek,
Christian Schwemmer,
Harald Weinfurter
Abstract:
We present a scalable method for the tomography of large multiqubit quantum registers. It acquires information about the permutationally invariant part of the density operator, which is a good approximation to the true state in many, relevant cases. Our method gives the best measurement strategy to minimize the experimental effort as well as the uncertainties of the reconstructed density matrix. W…
▽ More
We present a scalable method for the tomography of large multiqubit quantum registers. It acquires information about the permutationally invariant part of the density operator, which is a good approximation to the true state in many, relevant cases. Our method gives the best measurement strategy to minimize the experimental effort as well as the uncertainties of the reconstructed density matrix. We apply our method to the experimental tomography of a photonic four-qubit symmetric Dicke state.
△ Less
Submitted 8 January, 2011; v1 submitted 18 May, 2010;
originally announced May 2010.
-
Non-classicality thresholds for multiqubit states - numerical analysis
Authors:
Jacek Gruca,
Wieslaw Laskowski,
Marek Zukowski,
Nikolai Kiesel,
Witlef Wieczorek,
Christian Schmid,
Harald Weinfurter
Abstract:
States that strongly violate Bell's inequalities are required in many quantum informational protocols as, for example, in cryptography, secret sharing and the reduction of communication complexity. We investigate families of such states with a numerical method which allows to reveal non-classicality even without direct knowledge of Bell's inequalities for the given problem. An extensive set of num…
▽ More
States that strongly violate Bell's inequalities are required in many quantum informational protocols as, for example, in cryptography, secret sharing and the reduction of communication complexity. We investigate families of such states with a numerical method which allows to reveal non-classicality even without direct knowledge of Bell's inequalities for the given problem. An extensive set of numerical results is presented and discussed.
△ Less
Submitted 3 August, 2010; v1 submitted 4 May, 2010;
originally announced May 2010.
-
Operational multipartite entanglement classes for symmetric photonic qubit states
Authors:
N. Kiesel,
W. Wieczorek,
S. Krins,
T. Bastin,
H. Weinfurter,
E. Solano
Abstract:
We present experimental schemes that allow to study the entanglement classes of all symmetric states in multiqubit photonic systems. In addition to comparing the presented schemes in efficiency, we will highlight the relation between the entanglement properties of symmetric Dicke states and a recently proposed entanglement scheme for atoms. In analogy to the latter, we obtain a one-to-one corres…
▽ More
We present experimental schemes that allow to study the entanglement classes of all symmetric states in multiqubit photonic systems. In addition to comparing the presented schemes in efficiency, we will highlight the relation between the entanglement properties of symmetric Dicke states and a recently proposed entanglement scheme for atoms. In analogy to the latter, we obtain a one-to-one correspondence between well-defined sets of experimental parameters and multiqubit entanglement classes inside the symmetric subspace of the photonic system.
△ Less
Submitted 26 November, 2009;
originally announced November 2009.
-
Practical methods for witnessing genuine multi-qubit entanglement in the vicinity of symmetric states
Authors:
Geza Toth,
Witlef Wieczorek,
Roland Krischek,
Nikolai Kiesel,
Patrick Michelberger,
Harald Weinfurter
Abstract:
We present general numerical methods to construct witness operators for entanglement detection and estimation of the fidelity. Our methods are applied to detecting entanglement in the vicinity of a six-qubit Dicke state with three excitations and also to further entangled symmetric states. All our witnesses are designed to keep the measurement effort small. We present also general results on the…
▽ More
We present general numerical methods to construct witness operators for entanglement detection and estimation of the fidelity. Our methods are applied to detecting entanglement in the vicinity of a six-qubit Dicke state with three excitations and also to further entangled symmetric states. All our witnesses are designed to keep the measurement effort small. We present also general results on the efficient local decomposition of permutationally invariant operators, which makes it possible to measure projectors to symmetric states efficiently
△ Less
Submitted 18 August, 2009; v1 submitted 23 March, 2009;
originally announced March 2009.
-
Experimental entanglement of a six-photon symmetric Dicke state
Authors:
Witlef Wieczorek,
Roland Krischek,
Nikolai Kiesel,
Patrick Michelberger,
Geza Toth,
Harald Weinfurter
Abstract:
We report on the experimental observation and characterization of a six-photon entangled Dicke state. We obtain a fidelity as high as 0.654$\pm$0.024 and prove genuine six-photon entanglement by, amongst others, a two-setting witness yielding -0.422$\pm$0.148. This state has remarkable properties; e.g., it allows obtaining inequivalent entangled states of a lower qubit number via projective meas…
▽ More
We report on the experimental observation and characterization of a six-photon entangled Dicke state. We obtain a fidelity as high as 0.654$\pm$0.024 and prove genuine six-photon entanglement by, amongst others, a two-setting witness yielding -0.422$\pm$0.148. This state has remarkable properties; e.g., it allows obtaining inequivalent entangled states of a lower qubit number via projective measurements, and it possesses a high entanglement persistency against qubit loss. We characterize the properties of the six-photon Dicke state experimentally by detecting and analyzing the entanglement of a variety of multipartite entangled states.
△ Less
Submitted 16 July, 2009; v1 submitted 12 March, 2009;
originally announced March 2009.
-
Multi-qubit entanglement engineering via projective measurements
Authors:
Witlef Wieczorek,
Nikolai Kiesel,
Christian Schmid,
Harald Weinfurter
Abstract:
So far, various multi-photon entangled states have been observed experimentally by using different experimental set-ups. Here, we present a scheme to realize many SLOCC-inequivalent states of three and four qubits via projective measurements on suitable entangled states. We demonstrate how these states can be observed experimentally in a single set-up and study the feasibility of the implementat…
▽ More
So far, various multi-photon entangled states have been observed experimentally by using different experimental set-ups. Here, we present a scheme to realize many SLOCC-inequivalent states of three and four qubits via projective measurements on suitable entangled states. We demonstrate how these states can be observed experimentally in a single set-up and study the feasibility of the implementation with present-day technology.
△ Less
Submitted 26 January, 2009;
originally announced January 2009.
-
Experimental implementation of a four-player quantum game
Authors:
Christian Schmid,
Adrian P. Flitney,
Witlef Wieczorek,
Nikolai Kiesel,
Harald Weinfurter,
Lloyd C. L. Hollenberg
Abstract:
Game theory is central to the understanding of competitive interactions arising in many fields, from the social and physical sciences to economics. Recently, as the definition of information is generalized to include entangled quantum systems, quantum game theory has emerged as a framework for understanding the competitive flow of quantum information. Up till now only two-player quantum games ha…
▽ More
Game theory is central to the understanding of competitive interactions arising in many fields, from the social and physical sciences to economics. Recently, as the definition of information is generalized to include entangled quantum systems, quantum game theory has emerged as a framework for understanding the competitive flow of quantum information. Up till now only two-player quantum games have been demonstrated. Here we report the first experiment that implements a four-player quantum Minority game over tunable four-partite entangled states encoded in the polarization of single photons. Experimental application of appropriate quantum player strategies give equilibrium payoff values well above those achievable in the classical game. These results are in excellent quantitative agreement with our theoretical analysis of the symmetric Pareto optimal strategies. Our result demonstrate for the first time how non-trivial equilibria can arise in a competitive situation involving quantum agents and pave the way for a range of quantum transaction applications.
△ Less
Submitted 31 December, 2008;
originally announced January 2009.
-
Experimental observation of an entire family of four-photon entangled states
Authors:
Witlef Wieczorek,
Christian Schmid,
Nikolai Kiesel,
Reinhold Pohlner,
Otfried Gühne,
Harald Weinfurter
Abstract:
A single linear optical set-up is used to observe an entire family of four-photon entangled states. This approach breaks with the inflexibility of present linear-optical set-ups usually designed for the observation of a particular multi-partite entangled state only. The family includes several prominent entangled states that are known to be highly relevant for quantum information applications.
A single linear optical set-up is used to observe an entire family of four-photon entangled states. This approach breaks with the inflexibility of present linear-optical set-ups usually designed for the observation of a particular multi-partite entangled state only. The family includes several prominent entangled states that are known to be highly relevant for quantum information applications.
△ Less
Submitted 11 June, 2008;
originally announced June 2008.
-
Discriminating multi-partite entangled states
Authors:
Christian Schmid,
Nikolai Kiesel,
Wiesław Laskowski,
Witlef Wieczorek,
Marek Żukowski,
Harald Weinfurter
Abstract:
The variety of multi-partite entangled states enables numerous applications in novel quantum information tasks. In order to compare the suitability of different states from a theoretical point of view classifications have been introduced. Accordingly, here we derive criteria and demonstrate how to experimentally discriminate an observed state against the ones of certain other classes of multi-pa…
▽ More
The variety of multi-partite entangled states enables numerous applications in novel quantum information tasks. In order to compare the suitability of different states from a theoretical point of view classifications have been introduced. Accordingly, here we derive criteria and demonstrate how to experimentally discriminate an observed state against the ones of certain other classes of multi-partite entangled states. Our method, originating in Bell inequalities, adds an important tool for the characterization of multi-party entanglement.
△ Less
Submitted 19 April, 2008;
originally announced April 2008.
-
Revealing anyonic features in a toric code quantum simulation
Authors:
J. K. Pachos,
W. Wieczorek,
C. Schmid,
N. Kiesel,
R. Pohlner,
H. Weinfurter
Abstract:
Anyons are quasiparticles in two-dimensional systems that show statistical properties very distinct from those of bosons or fermions. While their isolated observation has not yet been achieved, here we perform a quantum simulation of anyons on the toric code model. By encoding the model in the multi-partite entangled state of polarized photons, we are able to demonstrate various manipulations of…
▽ More
Anyons are quasiparticles in two-dimensional systems that show statistical properties very distinct from those of bosons or fermions. While their isolated observation has not yet been achieved, here we perform a quantum simulation of anyons on the toric code model. By encoding the model in the multi-partite entangled state of polarized photons, we are able to demonstrate various manipulations of anyonic states and, in particular, their characteristic fractional statistics.
△ Less
Submitted 6 July, 2009; v1 submitted 3 October, 2007;
originally announced October 2007.
