-
On-chip stencil lithography for superconducting qubits
Authors:
Roudy Hanna,
Sören Ihssen,
Simon Geisert,
Umut Kocak,
Matteo Arfini,
Albert Hertel,
Thomas J. Smart,
Michael Schleenvoigt,
Tobias Schmitt,
Joscha Domnick,
Kaycee Underwood,
Abdur Rehman Jalil,
Jin Hee Bae,
Benjamin Bennemann,
Mathieu Féchant,
Mitchell Field,
Martin Spiecker,
Nicolas Zapata,
Christian Dickel,
Erwin Berenschot,
Niels Tas,
Gary A. Steele,
Detlev Grützmacher,
Ioan M. Pop,
Peter Schüffelgen
Abstract:
Improvements in circuit design and more recently in materials and surface cleaning have contributed to a rapid development of coherent superconducting qubits. However, organic resists commonly used for shadow evaporation of Josephson junctions (JJs) pose limitations due to residual contamination, poor thermal stability and compatibility under typical surface-cleaning conditions. To provide an alte…
▽ More
Improvements in circuit design and more recently in materials and surface cleaning have contributed to a rapid development of coherent superconducting qubits. However, organic resists commonly used for shadow evaporation of Josephson junctions (JJs) pose limitations due to residual contamination, poor thermal stability and compatibility under typical surface-cleaning conditions. To provide an alternative, we developed an inorganic SiO$_2$/Si$_3$N$_4$ on-chip stencil lithography mask for JJ fabrication. The stencil mask is resilient to aggressive cleaning agents and it withstands high temperatures up to 1200°C, thereby opening new avenues for JJ material exploration and interface optimization. To validate the concept, we performed shadow evaporation of Al-based transmon qubits followed by stencil mask lift-off using vapor hydrofluoric acid, which selectively etches SiO$_2$. We demonstrate average $T_1 \approx 75 \pm 11 μ$s over a 200 MHz frequency range in multiple cool-downs for one device, and $T_1 \approx 44\pm 8 μ$s for a second device. These results confirm the compatibility of stencil lithography with state-of-the-art superconducting quantum devices and motivate further investigations into materials engineering, film deposition and surface cleaning techniques.
△ Less
Submitted 20 August, 2025; v1 submitted 22 July, 2025;
originally announced July 2025.
-
High Impedance Granular Aluminum Ring Resonators
Authors:
Mahya Khorramshahi,
Martin Spiecker,
Patrick Paluch,
Simon Geisert,
Nicolas Gosling,
Nicolas Zapata,
Lucas Brauch,
Christian Kuebel,
Simone Dehm,
Ralph Krupke,
Wolfgang Wernsdorfer,
Ioan M. Pop,
Thomas Reisinger
Abstract:
Superconducting inductors with impedance surpassing the resistance quantum, i.e., superinductors, are important for quantum technologies because they enable the development of protected qubits, enhance coupling to systems with small electric dipole moments, and facilitate the study of phase-slip physics. We demonstrate superinductors with densely packed meandered traces of granular aluminum (grAl)…
▽ More
Superconducting inductors with impedance surpassing the resistance quantum, i.e., superinductors, are important for quantum technologies because they enable the development of protected qubits, enhance coupling to systems with small electric dipole moments, and facilitate the study of phase-slip physics. We demonstrate superinductors with densely packed meandered traces of granular aluminum (grAl) with inductances up to $4\,μ\mathrm{H}$, achieving impedances exceeding $100\,\mathrm{k}Ω$ in the $4-8\,\mathrm{GHz}$ range. Ring resonators made with grAl meandered superinductors exhibit quality factors on the order of $10^5$ in the single-photon regime and low non-linearity on the order of tens of $\mathrm{Hz}$. Depending on the grAl resistivity, at $10\,\mathrm{Hz}$, we measure frequency noise spectral densities in the range of $10^2$ to $10^3\,\mathrm{Hz}/\sqrt{\mathrm{Hz}}$. In some devices, in the single-photon regime, we observe a positive Kerr coefficient of unknown origin. Using more complex fabrication, the devices could be released from the substrate, either freestanding or suspended on a membrane, thereby further improving their impedance by a factor of three.
△ Less
Submitted 9 June, 2025;
originally announced June 2025.
-
Offset Charge Dependence of Measurement-Induced Transitions in Transmons
Authors:
Mathieu Féchant,
Marie Frédérique Dumas,
Denis Bénâtre,
Nicolas Gosling,
Philipp Lenhard,
Martin Spiecker,
Wolfgang Wernsdorfer,
Benjamin D'Anjou,
Alexandre Blais,
Ioan M. Pop
Abstract:
A key challenge in achieving scalable fault tolerance in superconducting quantum processors is readout fidelity, which lags behind one- and two-qubit gate fidelity. A major limitation in improving qubit readout is measurement-induced transitions, also referred to as qubit ionization, caused by multiphoton qubit-resonator excitation occurring at specific photon numbers. Since ionization can involve…
▽ More
A key challenge in achieving scalable fault tolerance in superconducting quantum processors is readout fidelity, which lags behind one- and two-qubit gate fidelity. A major limitation in improving qubit readout is measurement-induced transitions, also referred to as qubit ionization, caused by multiphoton qubit-resonator excitation occurring at specific photon numbers. Since ionization can involve highly excited states, it has been predicted that in transmons -- the most widely used superconducting qubit -- the photon number at which measurement-induced transitions occur is gate charge dependent. This dependence is expected to persist deep in the transmon regime where the qubit frequency is gate charge insensitive. We experimentally confirm this prediction by characterizing measurement-induced transitions with increasing resonator photon population while actively stabilizing the transmon's gate charge. Furthermore, because highly excited states are involved, achieving quantitative agreement between theory and experiment requires accounting for higher-order harmonics in the transmon Hamiltonian.
△ Less
Submitted 1 May, 2025;
originally announced May 2025.
-
Low crosstalk modular flip-chip architecture for coupled superconducting qubits
Authors:
Soeren Ihssen,
Simon Geisert,
Gabriel Jauma,
Patrick Winkel,
Martin Spiecker,
Nicolas Zapata,
Nicolas Gosling,
Patrick Paluch,
Manuel Pino,
Thomas Reisinger,
Wolfgang Wernsdorfer,
Juan Jose Garcia-Ripoll,
Ioan M. Pop
Abstract:
We present a flip-chip architecture for an array of coupled superconducting qubits, in which circuit components reside inside individual microwave enclosures. In contrast to other flip-chip approaches, the qubit chips in our architecture are electrically floating, which guarantees a simple, fully modular assembly of capacitively coupled circuit components such as qubit, control, and coupling struc…
▽ More
We present a flip-chip architecture for an array of coupled superconducting qubits, in which circuit components reside inside individual microwave enclosures. In contrast to other flip-chip approaches, the qubit chips in our architecture are electrically floating, which guarantees a simple, fully modular assembly of capacitively coupled circuit components such as qubit, control, and coupling structures, as well as reduced crosstalk between the components. We validate the concept with a chain of three nearest neighbor coupled generalized flux qubits in which the center qubit acts as a frequency-tunable coupler. Using this coupler, we demonstrate a transverse coupling on/off ratio $\approx$ 50, zz-crosstalk $\approx$ 0.7 kHz between resonant qubits and isolation between the qubit enclosures > 60 dB.
△ Less
Submitted 25 April, 2025; v1 submitted 27 February, 2025;
originally announced February 2025.
-
Kinetic inductance coupling for circuit QED with spins
Authors:
S. Günzler,
D. Rieger,
M. Spiecker,
T. Koch,
G. A. Timco,
R. E. P. Winpenny,
I. M. Pop,
W. Wernsdorfer
Abstract:
In contrast to the commonly used qubit resonator transverse coupling via the $σ_{xy}$-degree of freedom, longitudinal coupling through $σ_z$ presents a tantalizing alternative: it does not hybridize the modes, eliminating Purcell decay, and it enables quantum-non-demolishing qubit readout independent of the qubit-resonator frequency detuning. Here, we demonstrate longitudinal coupling between a {C…
▽ More
In contrast to the commonly used qubit resonator transverse coupling via the $σ_{xy}$-degree of freedom, longitudinal coupling through $σ_z$ presents a tantalizing alternative: it does not hybridize the modes, eliminating Purcell decay, and it enables quantum-non-demolishing qubit readout independent of the qubit-resonator frequency detuning. Here, we demonstrate longitudinal coupling between a {Cr$_7$Ni} molecular spin qubit ensemble and the kinetic inductance of a granular aluminum superconducting microwave resonator. The inherent frequency-independence of this coupling allows for the utilization of a 7.8 GHz readout resonator to measure the full {Cr$_7$Ni} magnetization curve spanning 0-600 mT, corresponding to a spin frequency range of $f_\text{spin}=$0-15 GHz. For 2 GHz detuning from the readout resonator, we measure a $1/e$ spin relaxation time $τ=$0.38 s, limited by phonon decay to the substrate. Based on these results, we propose a path towards longitudinal coupling of single spins to a superconducting fluxonium qubit.
△ Less
Submitted 11 February, 2025;
originally announced February 2025.
-
Spin Environment of a Superconducting Qubit in High Magnetic Fields
Authors:
S. Günzler,
J. Beck,
D. Rieger,
N. Gosling,
N. Zapata,
M. Field,
S. Geisert,
A. Bacher,
J. K. Hohmann,
M. Spiecker,
W. Wernsdorfer,
I. M. Pop
Abstract:
Superconducting qubits equipped with quantum non-demolishing readout and active feedback can be used as information engines to probe and manipulate microscopic degrees of freedom, whether intentionally designed or naturally occurring in their environment. In the case of spin systems, the required magnetic field bias presents a challenge for superconductors and Josephson junctions. Here we demonstr…
▽ More
Superconducting qubits equipped with quantum non-demolishing readout and active feedback can be used as information engines to probe and manipulate microscopic degrees of freedom, whether intentionally designed or naturally occurring in their environment. In the case of spin systems, the required magnetic field bias presents a challenge for superconductors and Josephson junctions. Here we demonstrate a granular aluminum nanojunction fluxonium qubit (gralmonium) with spectrum and coherence resilient to fields beyond one Tesla. Sweeping the field reveals a paramagnetic spin-1/2 ensemble, which is the dominant gralmonium loss mechanism when the electron spin resonance matches the qubit. We also observe a suppression of fast flux noise in magnetic field, suggesting the freezing of surface spins. Using an active state stabilization sequence, the qubit hyperpolarizes long-lived two-level systems (TLSs) in its environment, previously speculated to be spins. Surprisingly, the coupling to these TLSs is unaffected by magnetic fields, leaving the question of their origin open. The robust operation of gralmoniums in Tesla fields offers new opportunities to explore unresolved questions in spin environment dynamics and facilitates hybrid architectures linking superconducting qubits with spin systems.
△ Less
Submitted 7 January, 2025;
originally announced January 2025.
-
Thermalization of a flexible microwave stripline measured by a superconducting qubit
Authors:
Patrick Paluch,
Martin Spiecker,
Nicolas Gosling,
Viktor Adam,
Jakob Kammhuber,
Kiefer Vermeulen,
Daniël Bouman,
Wolfgang Wernsdorfer,
Ioan M. Pop
Abstract:
With the demand for scalable cryogenic microwave circuitry continuously rising, recently developed flexible microwave striplines offer the tantalyzing perspective of increasing the cabling density by an order of magnitude without thermally overloading the cryostat. We use a superconducting quantum circuit to test the thermalization of input flex cables with integrated $60\,$dB of attenuation distr…
▽ More
With the demand for scalable cryogenic microwave circuitry continuously rising, recently developed flexible microwave striplines offer the tantalyzing perspective of increasing the cabling density by an order of magnitude without thermally overloading the cryostat. We use a superconducting quantum circuit to test the thermalization of input flex cables with integrated $60\,$dB of attenuation distributed at various temperature stages. From the measured decoherence rate of a superconducting fluxonium qubit, we estimate a residual population of the readout resonator below $3.5\cdot10^{-3}$ photons and we measure a $0.28\,$ms thermalization time for the flexible stripline attenuators. Furthermore, we confirm that the qubit reaches an effective temperature of $26.4\,$mK, close to the base temperature of the cryostat, practically the same as when using a conventional semi-rigid coaxial cable setup.
△ Less
Submitted 1 October, 2024;
originally announced October 2024.
-
Pure kinetic inductance coupling for cQED with flux qubits
Authors:
Simon Geisert,
Soeren Ihssen,
Patrick Winkel,
Martin Spiecker,
Mathieu Fechant,
Patrick Paluch,
Nicolas Gosling,
Nicolas Zapata,
Simon Günzler,
Dennis Rieger,
Denis Bénâtre,
Thomas Reisinger,
Wolfgang Wernsdorfer,
Ioan M. Pop
Abstract:
We demonstrate a qubit-readout architecture where the dispersive coupling is entirely mediated by a kinetic inductance. This allows us to engineer the dispersive shift of the readout resonator independent of the qubit and resonator capacitances. We validate the pure kinetic coupling concept and demonstrate various generalized flux qubit regimes from plasmon to fluxon, with dispersive shifts rangin…
▽ More
We demonstrate a qubit-readout architecture where the dispersive coupling is entirely mediated by a kinetic inductance. This allows us to engineer the dispersive shift of the readout resonator independent of the qubit and resonator capacitances. We validate the pure kinetic coupling concept and demonstrate various generalized flux qubit regimes from plasmon to fluxon, with dispersive shifts ranging from 60 kHz to 2 MHz at the half-flux quantum sweet spot. We achieve readout performances comparable to conventional architectures with quantum state preparation fidelities of 99.7 % and 92.7 % for the ground and excited states, respectively, and below 0.1 % leakage to non-computational states.
△ Less
Submitted 10 September, 2024; v1 submitted 23 July, 2024;
originally announced July 2024.
-
Solomon equations for qubit and two-level systems: Insights into non-Poissonian quantum jumps
Authors:
Martin Spiecker,
Andrei I. Pavlov,
Alexander Shnirman,
Ioan M. Pop
Abstract:
We measure and model the combined relaxation of a qubit coupled to a discrete two-level system~(TLS) environment, also known as the central spin model. If the TLSs are much longer-lived than the qubit, non-exponential relaxation and non-Poissonian quantum jumps can be observed. In the limit of large numbers of TLSs, the relaxation is likely to follow a power law, which we confirm with measurements…
▽ More
We measure and model the combined relaxation of a qubit coupled to a discrete two-level system~(TLS) environment, also known as the central spin model. If the TLSs are much longer-lived than the qubit, non-exponential relaxation and non-Poissonian quantum jumps can be observed. In the limit of large numbers of TLSs, the relaxation is likely to follow a power law, which we confirm with measurements on a superconducting fluxonium qubit. Moreover, the observed relaxation and quantum jump statistics are described by the Solomon equations, for which we present a derivation starting from the general Lindblad equation for an arbitrary number of TLSs. We also show how to reproduce the non-Poissonian quantum jump statistics using a diffusive stochastic Schrödinger equation. The fact that the measured quantum jump statistics can be reproduced by the Solomon equations, which ignore the quantum measurement backaction, hints at a quantum-to-classical transition.
△ Less
Submitted 27 May, 2024; v1 submitted 13 July, 2023;
originally announced July 2023.
-
Fano Interference in Microwave Resonator Measurements
Authors:
D. Rieger,
S. Günzler,
M. Spiecker,
A. Nambisan,
W. Wernsdorfer,
I. M. Pop
Abstract:
Resonator measurements are a simple but powerful tool to characterize a material's microwave response. The losses of a resonant mode are quantified by its internal quality factor $Q_\mathrm{i}$, which can be extracted from the scattering coefficient in a microwave reflection or transmission measurement. Here we show that a systematic error on $Q_\mathrm{i}$ arises from Fano interference of the sig…
▽ More
Resonator measurements are a simple but powerful tool to characterize a material's microwave response. The losses of a resonant mode are quantified by its internal quality factor $Q_\mathrm{i}$, which can be extracted from the scattering coefficient in a microwave reflection or transmission measurement. Here we show that a systematic error on $Q_\mathrm{i}$ arises from Fano interference of the signal with a background path. Limited knowledge of the interfering paths in a given setup translates into a range of uncertainty for $Q_\mathrm{i}$, which increases with the coupling coefficient. We experimentally illustrate the relevance of Fano interference in typical microwave resonator measurements and the associated pitfalls encountered in extracting $Q_\mathrm{i}$. On the other hand, we also show how to characterize and utilize the Fano interference to eliminate the systematic error.
△ Less
Submitted 27 March, 2023; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Two-level system hyperpolarization using a quantum Szilard engine
Authors:
Martin Spiecker,
Patrick Paluch,
Nicolas Gosling,
Niv Drucker,
Shlomi Matityahu,
Daria Gusenkova,
Simon Günzler,
Dennis Rieger,
Ivan Takmakov,
Francesco Valenti,
Patrick Winkel,
Richard Gebauer,
Oliver Sander,
Gianluigi Catelani,
Alexander Shnirman,
Alexey V. Ustinov,
Wolfgang Wernsdorfer,
Yonatan Cohen,
Ioan M. Pop
Abstract:
The innate complexity of solid state physics exposes superconducting quantum circuits to interactions with uncontrolled degrees of freedom degrading their coherence. By using a simple stabilization sequence we show that a superconducting fluxonium qubit is coupled to a two-level system (TLS) environment of unknown origin, with a relatively long energy relaxation time exceeding $50\,\text{ms}$. Imp…
▽ More
The innate complexity of solid state physics exposes superconducting quantum circuits to interactions with uncontrolled degrees of freedom degrading their coherence. By using a simple stabilization sequence we show that a superconducting fluxonium qubit is coupled to a two-level system (TLS) environment of unknown origin, with a relatively long energy relaxation time exceeding $50\,\text{ms}$. Implementing a quantum Szilard engine with an active feedback control loop allows us to decide whether the qubit heats or cools its TLS environment. The TLSs can be cooled down resulting in a four times lower qubit population, or they can be heated to manifest themselves as a negative temperature environment corresponding to a qubit population of $\sim 80\,\%$. We show that the TLSs and the qubit are each other's dominant loss mechanism and that the qubit relaxation is independent of the TLS populations. Understanding and mitigating TLS environments is therefore not only crucial to improve qubit lifetimes but also to avoid non-Markovian qubit dynamics.
△ Less
Submitted 22 May, 2024; v1 submitted 1 April, 2022;
originally announced April 2022.
-
Gralmonium: Granular Aluminum Nano-Junction Fluxonium Qubit
Authors:
D. Rieger,
S. Günzler,
M. Spiecker,
P. Paluch,
P. Winkel,
L. Hahn,
J. K. Hohmann,
A. Bacher,
W. Wernsdorfer,
I. M. Pop
Abstract:
Mesoscopic Josephson junctions (JJs), consisting of overlapping superconducting electrodes separated by a nanometer thin oxide layer, provide a precious source of nonlinearity for superconducting quantum circuits and are at the heart of state-of-the-art qubits, such as the transmon and fluxonium. Here, we show that in a fluxonium qubit the role of the JJ can also be played by a lithographically de…
▽ More
Mesoscopic Josephson junctions (JJs), consisting of overlapping superconducting electrodes separated by a nanometer thin oxide layer, provide a precious source of nonlinearity for superconducting quantum circuits and are at the heart of state-of-the-art qubits, such as the transmon and fluxonium. Here, we show that in a fluxonium qubit the role of the JJ can also be played by a lithographically defined, self-structured granular aluminum (grAl) nano-junction: a superconductor-insulator-superconductor (SIS) JJ obtained in a single layer, zero-angle evaporation. The measured spectrum of the resulting qubit, which we nickname gralmonium, is indistinguishable from the one of a standard fluxonium qubit. Remarkably, the lack of a mesoscopic parallel plate capacitor gives rise to an intrinsically large grAl nano-junction charging energy in the range of tens of $\mathrm{GHz}$, comparable to its Josephson energy $E_\mathrm{J}$. We measure average energy relaxation times of $T_1=10\,\mathrm{μs}$ and Hahn echo coherence times of $T_2^\text{echo}=9\,\mathrm{μs}$. The exponential sensitivity of the gralmonium to the $E_\text{J}$ of the grAl nano-junction provides a highly susceptible detector. Indeed, we observe spontaneous jumps of the value of $E_\text{J}$ on timescales from milliseconds to days, which offer a powerful diagnostics tool for microscopic defects in superconducting materials.
△ Less
Submitted 5 September, 2022; v1 submitted 3 February, 2022;
originally announced February 2022.
-
Operating in a deep underground facility improves the locking of gradiometric fluxonium qubits at the sweet spots
Authors:
Daria Gusenkova,
Francesco Valenti,
Martin Spiecker,
Simon Günzler,
Patrick Paluch,
Dennis Rieger,
Larisa-Milena Pioraş-Ţimbolmaş,
Liviu P. Zârbo,
Nicola Casali,
Ivan Colantoni,
Angelo Cruciani,
Stefano Pirro,
Laura Cardani,
Alexandru Petrescu,
Wolfgang Wernsdorfer,
Patrick Winkel,
Ioan M. Pop
Abstract:
We demonstrate flux-bias locking and operation of a gradiometric fluxonium artificial atom using two symmetric granular aluminum (grAl) loops to implement the superinductor. The gradiometric fluxonium shows two orders of magnitude suppression of sensitivity to homogeneous magnetic fields, which can be an asset for hybrid quantum systems requiring strong magnetic field biasing. By cooling down the…
▽ More
We demonstrate flux-bias locking and operation of a gradiometric fluxonium artificial atom using two symmetric granular aluminum (grAl) loops to implement the superinductor. The gradiometric fluxonium shows two orders of magnitude suppression of sensitivity to homogeneous magnetic fields, which can be an asset for hybrid quantum systems requiring strong magnetic field biasing. By cooling down the device in an external magnetic field while crossing the metal-to-superconductor transition, the gradiometric fluxonium can be locked either at $0$ or $Φ_0/2$ effective flux bias, corresponding to an even or odd number of trapped fluxons, respectively. At mK temperatures, the fluxon parity prepared during initialization survives to magnetic field bias exceeding $100 \,Φ_0$. However, even for states biased in the vicinity of $1 \,Φ_0$, we observe unexpectedly short fluxon lifetimes of a few hours, which cannot be explained by thermal or quantum phase slips. When operating in a deep-underground cryostat of the Gran Sasso laboratory, the fluxon lifetimes increase to days, indicating that ionizing events activate phase slips in the grAl superinductor.
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
Superconducting microwave magnetometer for absolute flux detection
Authors:
Simon Günzler,
Patrick Winkel,
Dennis Rieger,
Kiril Borisov,
Martin Spiecker,
Alexey V. Ustinov,
Ioan M. Pop,
Wolfgang Wernsdorfer
Abstract:
Superconducting quantum interference devices (SQUIDs) are among the most sensitive detectors for out-of-plane magnetic field components. However, due to their periodic response with short modulation period $M = 1 Φ_0$, determined by the magnetic flux quantum $Φ_0 \approx 2.068\times 10^{-15}\,\mathrm{Wb}$, it is difficult to infer the value of the magnetic flux unambiguously, especially in case th…
▽ More
Superconducting quantum interference devices (SQUIDs) are among the most sensitive detectors for out-of-plane magnetic field components. However, due to their periodic response with short modulation period $M = 1 Φ_0$, determined by the magnetic flux quantum $Φ_0 \approx 2.068\times 10^{-15}\,\mathrm{Wb}$, it is difficult to infer the value of the magnetic flux unambiguously, especially in case the magnetic flux enclosed in the SQUID loop changes by many flux quanta. Here, we demonstrate that by introducing a second degree of freedom in the form of a second SQUID, we substantially enhance the modulation period $M$ of our device without sacrificing sensitivity. As a proof of concept, we implement our idea by embedding two asymmetric direct current SQUIDs into a common tank circuit. By measuring the reflection coefficient of the device, we extract the two lowest energy eigenfrequencies as a function of the external magnetic flux created by a superconducting field coil, from which we experimentally deduce a modulation period $M \geq 15 Φ_0$, as well as the magnetic offset-field $B_0 = 22\,\mathrm{nT}$ present in our experiment.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Minimizing the discrimination time for quantum states of an artificial atom
Authors:
Ivan Takmakov,
Patrick Winkel,
Farshad Foroughi,
Luca Planat,
Daria Gusenkova,
Martin Spiecker,
Dennis Rieger,
Lukas Grünhaupt,
Alexey V. Ustinov,
Wolfgang Wernsdorfer,
Ioan M. Pop,
Nicolas Roch
Abstract:
Fast discrimination between quantum states of superconducting artificial atoms is an important ingredient for quantum information processing. In circuit quantum electrodynamics, increasing the signal field amplitude in the readout resonator, dispersively coupled to the artificial atom, improves the signal-to-noise ratio and increases the measurement strength. Here we employ this effect over two or…
▽ More
Fast discrimination between quantum states of superconducting artificial atoms is an important ingredient for quantum information processing. In circuit quantum electrodynamics, increasing the signal field amplitude in the readout resonator, dispersively coupled to the artificial atom, improves the signal-to-noise ratio and increases the measurement strength. Here we employ this effect over two orders of magnitude in readout power, made possible by the unique combination of a dimer Josephson junction array amplifier with a large dynamic range, and the fact that the readout of our granular aluminum fluxonium artificial atom remained quantum-non-demolition (QND) at relatively large photon numbers in the readout resonator, up to $\overline{n} = 110$. Using Bayesian inference, this allows us to detect quantum jumps faster than the readout resonator response time $2/κ$, where $κ$ is the bandwidth of the readout resonator.
△ Less
Submitted 18 November, 2020; v1 submitted 17 November, 2020;
originally announced November 2020.
-
Quantum non-demolition dispersive readout of a superconducting artificial atom using large photon numbers
Authors:
Daria Gusenkova,
Martin Spiecker,
Richard Gebauer,
Madita Willsch,
Francesco Valenti,
Nick Karcher,
Lukas Grünhaupt,
Ivan Takmakov,
Patrick Winkel,
Dennis Rieger,
Alexey V. Ustinov,
Nicolas Roch,
Wolfgang Wernsdorfer,
Kristel Michielsen,
Oliver Sander,
Ioan M. Pop
Abstract:
Reading out the state of superconducting artificial atoms typically relies on dispersive coupling to a readout resonator. For a given system noise temperature, increasing the circulating photon number $\bar{n}$ in the resonator enables a shorter measurement time and is therefore expected to reduce readout errors caused by spontaneous atom transitions. However, increasing $\bar{n}$ is generally obs…
▽ More
Reading out the state of superconducting artificial atoms typically relies on dispersive coupling to a readout resonator. For a given system noise temperature, increasing the circulating photon number $\bar{n}$ in the resonator enables a shorter measurement time and is therefore expected to reduce readout errors caused by spontaneous atom transitions. However, increasing $\bar{n}$ is generally observed to also increase these transition rates. Here we present a fluxonium artificial atom in which we measure an overall flat dependence of the transition rates between its first two states as a function of $\bar{n}$, up to $\bar{n}\approx200$. Despite the fact that we observe the expected decrease of the dispersive shift with increasing readout power, the signal-to-noise ratio continuously improves with increasing $\bar{n}$. Even without the use of a parametric amplifier, at $\bar{n}=74$, we measure fidelities of 99% and 93% for feedback-assisted ground and excited state preparation, respectively.
△ Less
Submitted 20 November, 2020; v1 submitted 30 September, 2020;
originally announced September 2020.
-
Superconducting granular aluminum resonators resilient to magnetic fields up to 1 Tesla
Authors:
K. Borisov,
D. Rieger,
P. Winkel,
F. Henriques,
F. Valenti,
A. Ionita,
M. Wessbecher,
M. Spiecker,
D. Gusenkova,
I. M. Pop,
W. Wernsdorfer
Abstract:
High kinetic inductance materials constitute a valuable resource for superconducting quantum circuits and hybrid architectures. Superconducting granular aluminum (grAl) reaches kinetic sheet inductances in the nH/$\square$ range, with proven applicability in superconducting quantum bits and microwave detectors. Here we show that the single photon internal quality factor $Q_{\mathrm{i}}$ of grAl mi…
▽ More
High kinetic inductance materials constitute a valuable resource for superconducting quantum circuits and hybrid architectures. Superconducting granular aluminum (grAl) reaches kinetic sheet inductances in the nH/$\square$ range, with proven applicability in superconducting quantum bits and microwave detectors. Here we show that the single photon internal quality factor $Q_{\mathrm{i}}$ of grAl microwave resonators exceeds $10^5$ in magnetic fields up to 1T, aligned in-plane to the grAl films. Small perpendicular magnetic fields, in the range of 0.5mT, enhance $Q_{\mathrm{i}}$ by approximately 15%, possibly due to the introduction of quasiparticle traps in the form of fluxons. Further increasing the perpendicular field deteriorates the resonators' quality factor. These results open the door for the use of high kinetic inductance grAl structures in circuit quantum electrodynamics and hybrid architectures with magnetic field requirements.
△ Less
Submitted 11 June, 2020; v1 submitted 9 June, 2020;
originally announced June 2020.
-
State preparation of a fluxonium qubit with feedback from a custom FPGA-based platform
Authors:
Richard Gebauer,
Nick Karcher,
Daria Gusenkova,
Martin Spiecker,
Lukas Grünhaupt,
Ivan Takmakov,
Patrick Winkel,
Luca Planat,
Nicolas Roch,
Wolfgang Wernsdorfer,
Alexey V. Ustinov,
Marc Weber,
Martin Weides,
Ioan M. Pop,
Oliver Sander
Abstract:
We developed a versatile integrated control and readout instrument for experiments with superconducting quantum bits (qubits), based on a field-programmable gate array (FPGA) platform. Using this platform, we perform measurement-based, closed-loop feedback operations with $428 \, \mathrm{ns}$ platform latency. The feedback capability is instrumental in realizing active reset initialization of the…
▽ More
We developed a versatile integrated control and readout instrument for experiments with superconducting quantum bits (qubits), based on a field-programmable gate array (FPGA) platform. Using this platform, we perform measurement-based, closed-loop feedback operations with $428 \, \mathrm{ns}$ platform latency. The feedback capability is instrumental in realizing active reset initialization of the qubit into the ground state in a time much shorter than its energy relaxation time $T_1$. We show experimental results demonstrating reset of a fluxonium qubit with $99.4\,\%$ fidelity, using a readout-and-drive pulse sequence approximately $1.5 \, \mathrm{μs}$ long. Compared to passive ground state initialization through thermalization, with the time constant given by $T_1 = ~ 80 \, \mathrm{μs}$, the use of the FPGA-based platform allows us to improve both the fidelity and the time of the qubit initialization by an order of magnitude.
△ Less
Submitted 14 December, 2019;
originally announced December 2019.
-
Implementation of a transmon qubit using superconducting granular aluminum
Authors:
Patrick Winkel,
Kiril Borisov,
Lukas Grünhaupt,
Dennis Rieger,
Martin Spiecker,
Francesco Valenti,
Alexey V. Ustinov,
Wolfgang Wernsdorfer,
Ioan M. Pop
Abstract:
The high kinetic inductance offered by granular aluminum (grAl) has recently been employed for linear inductors in superconducting high-impedance qubits and kinetic inductance detectors. Due to its large critical current density compared to typical Josephson junctions, its resilience to external magnetic fields, and its low dissipation, grAl may also provide a robust source of non-linearity for st…
▽ More
The high kinetic inductance offered by granular aluminum (grAl) has recently been employed for linear inductors in superconducting high-impedance qubits and kinetic inductance detectors. Due to its large critical current density compared to typical Josephson junctions, its resilience to external magnetic fields, and its low dissipation, grAl may also provide a robust source of non-linearity for strongly driven quantum circuits, topological superconductivity, and hybrid systems. Having said that, can the grAl non-linearity be sufficient to build a qubit? Here we show that a small grAl volume ($10 \times 200 \times 500 \,\mathrm{nm^3}$) shunted by a thin film aluminum capacitor results in a microwave oscillator with anharmonicity $α$ two orders of magnitude larger than its spectral linewidth $Γ_{01}$, effectively forming a transmon qubit. With increasing drive power, we observe several multi-photon transitions starting from the ground state, from which we extract $α= 2 π\times 4.48\,\mathrm{MHz}$. Resonance fluorescence measurements of the $|0> \rightarrow |1>$ transition yield an intrinsic qubit linewidth $γ= 2 π\times 10\,\mathrm{kHz}$, corresponding to a lifetime of $16\,\mathrm{μs}$. This linewidth remains below $2 π\times 150\,\mathrm{kHz}$ for in-plane magnetic fields up to $\sim70\,\mathrm{mT}$.
△ Less
Submitted 27 October, 2023; v1 submitted 6 November, 2019;
originally announced November 2019.
-
Transmon Qubit in a Magnetic Field: Evolution of Coherence and Transition Frequency
Authors:
Andre Schneider,
Tim Wolz,
Marco Pfirrmann,
Martin Spiecker,
Hannes Rotzinger,
Alexey V. Ustinov,
Martin Weides
Abstract:
We report on spectroscopic and time-domain measurements on a fixed-frequency concentric transmon qubit in an applied in-plane magnetic field to explore its limits of magnetic field compatibility. We demonstrate quantum coherence of the qubit up to field values of $B={40}\,\mathrm{mT}$, even without an optimized chip design or material combination of the qubit. The dephasing rate $Γ_\varphi$ is sho…
▽ More
We report on spectroscopic and time-domain measurements on a fixed-frequency concentric transmon qubit in an applied in-plane magnetic field to explore its limits of magnetic field compatibility. We demonstrate quantum coherence of the qubit up to field values of $B={40}\,\mathrm{mT}$, even without an optimized chip design or material combination of the qubit. The dephasing rate $Γ_\varphi$ is shown to be not affected by the magnetic field in a broad range of the qubit transition frequency. For the evolution of the qubit transition frequency, we find the unintended second junction created in the shadow angle evaporation process to be non-negligible and deduce an analytic formula for the field-dependent qubit energies. We discuss the relevant field-dependent loss channels, which can not be distinguished by our measurements, inviting further theoretical and experimental investigation. Using well-known and well-studied standard components of the superconducting quantum architecture, we are able to reach a field regime relevant for quantum sensing and hybrid applications of magnetic spins and spin systems.
△ Less
Submitted 6 September, 2019; v1 submitted 30 March, 2019;
originally announced April 2019.
-
Granular aluminum: A superconducting material for high impedance quantum circuits
Authors:
Lukas Grünhaupt,
Martin Spiecker,
Daria Gusenkova,
Nataliya Maleeva,
Sebastian T. Skacel,
Ivan Takmakov,
Francesco Valenti,
Patrick Winkel,
Hannes Rotzinger,
Alexey V. Ustinov,
Ioan M. Pop
Abstract:
Superconducting quantum information processing machines are predominantly based on microwave circuits with relatively low characteristic impedance, of about 100 Ohm, and small anharmonicity, which can limit their coherence and logic gate fidelity. A promising alternative are circuits based on so-called superinductors, with characteristic impedances exceeding the resistance quantum $R_Q = 6.4$ k…
▽ More
Superconducting quantum information processing machines are predominantly based on microwave circuits with relatively low characteristic impedance, of about 100 Ohm, and small anharmonicity, which can limit their coherence and logic gate fidelity. A promising alternative are circuits based on so-called superinductors, with characteristic impedances exceeding the resistance quantum $R_Q = 6.4$ k$Ω$. However, previous implementations of superinductors, consisting of mesoscopic Josephson junction arrays, can introduce unintended nonlinearity or parasitic resonant modes in the qubit vicinity, degrading its coherence. Here we present a fluxonium qubit design using a granular aluminum (grAl) superinductor strip. Granular aluminum is a particularly attractive material, as it self-assembles into an effective junction array with a remarkably high kinetic inductance, and its fabrication can be in-situ integrated with standard aluminum circuit processing. The measured qubit coherence time $T_2^R$ up to 30 $μ$s illustrates the potential of grAl for applications ranging from protected qubit designs to quantum limited amplifiers and detectors.
△ Less
Submitted 27 September, 2018;
originally announced September 2018.
