-
Quantitative calibration of a TWPA applied to an optomechanical platform
Authors:
Alexandre Delattre,
Ilya Golokolenov,
Richard Pedurand,
Nicolas Roch,
Arpit Ranadive,
Martina Esposito,
Luca Planat,
Andrew Fefferman,
Eddy Collin,
Xin Zhou,
Mika A. Sillanpaa,
Laure Mercier de Lepinay,
Andrew D. Armour,
Jonas Glatthard
Abstract:
In the last decade, the microwave quantum electronics toolbox has been enriched with quantum limited detection devices such as Traveling Wave Parametric Amplifiers (TWPAs). The extreme sensitivity they provide is not only mandatory for some physics applications within quantum information processing, but is also the key element that will determine the detection limit of quantum sensing setups. In t…
▽ More
In the last decade, the microwave quantum electronics toolbox has been enriched with quantum limited detection devices such as Traveling Wave Parametric Amplifiers (TWPAs). The extreme sensitivity they provide is not only mandatory for some physics applications within quantum information processing, but is also the key element that will determine the detection limit of quantum sensing setups. In the framework of microwave optomechanical systems, an unprecedented range of small motions and forces is accessible, for which a specific quantitative calibration becomes necessary. We report on near quantum-limited measurements performed with an aluminum drumhead mechanical device within the temperature range 4 mK - 400 mK. The whole setup is carefully calibrated, especially taking into account the power-dependence of microwave absorption in the superconducting optomechanical cavity. This effect is commonly attributed to Two-Level-Systems (TLSs) present in the metal oxide. We demonstrate that a similar feature exists in the TWPA, and can be phenomenologically fit with adapted expressions. The power and temperature dependence is studied over the full parameter range, leading to an absolute definition of phonon population (i.e. Brownian motion amplitude), with an uncertainty +-20 %.
△ Less
Submitted 9 May, 2025;
originally announced May 2025.
-
Threshold-less and Flexibly Tunable Frequency Comb via Floquet Engineering
Authors:
Sihan Wang,
Cheng Wang,
Matthijs H. J. de Jong,
Laure Mercier de Lépinay,
Jingwei Zhou,
Mika A. Sillanpää,
Yulong Liu
Abstract:
Frequency combs have revolutionized communication, metrology and spectroscopy. Numerous efforts have been dedicated to developing integrated combs, predominantly relying on Pockels or Kerr mechanisms. In this work, we propose and demonstrate a new type of frequency comb-Floquet cavity frequency comb-that does not rely on intrinsic material non-linearity. By periodically modulating the resonance fr…
▽ More
Frequency combs have revolutionized communication, metrology and spectroscopy. Numerous efforts have been dedicated to developing integrated combs, predominantly relying on Pockels or Kerr mechanisms. In this work, we propose and demonstrate a new type of frequency comb-Floquet cavity frequency comb-that does not rely on intrinsic material non-linearity. By periodically modulating the resonance frequency of a cavity, a Floquet cavity with multiple equally spaced frequency components is created. The pump tone interacts with the pre-modulated cavity, generating the output frequency comb. This approach offers a flexible tuning range and operates in a threshold-less manner, obviating the need to overcome nonlinear initiation threshold. We implement this on a microwave cavity optomechanical system on-chip. Compared to Kerr optomechanical combs, this approach efficiently generates comb with pump signal far from the cavity's intrinsic frequency, and the power required for detection is reduced by approximately a factor of \(10^6\), providing a promising platform for frequency comb generation.
△ Less
Submitted 28 May, 2025; v1 submitted 8 April, 2025;
originally announced April 2025.
-
Measurement of the Casimir force between superconductors
Authors:
Matthijs H. J. de Jong,
Evren Korkmazgil,
Louise Banniard,
Mika A. Sillanpää,
Laure Mercier de Lépinay
Abstract:
The Casimir force follows from quantum fluctuations of the electromagnetic field and yields a nonlinear attractive force between closely spaced conductive objects. Its magnitude depends on the conductivity of the objects up to optical frequencies. Measuring the Casimir force in superconductors should allow to isolate frequency-specific contributions to the Casimir effect, as frequencies below the…
▽ More
The Casimir force follows from quantum fluctuations of the electromagnetic field and yields a nonlinear attractive force between closely spaced conductive objects. Its magnitude depends on the conductivity of the objects up to optical frequencies. Measuring the Casimir force in superconductors should allow to isolate frequency-specific contributions to the Casimir effect, as frequencies below the superconducting gap energy are expected to contribute differently than those above it. There is significant interest in this contribution as it is suspected to contribute to an unexplained discrepancy between predictions and measurements of the Casimir force, which questions the basic principles on which estimates of the magnitude are based. Here, we observe the Casimir force between superconducting objects for the first time, through the nonlinear dynamics it imparts to a superconducting drum resonator in a microwave optomechanical system. There is excellent agreement between the experiment and the Casimir force magnitude computed for this device across three orders of magnitude of displacement. Furthermore, the Casimir nonlinearity is intense enough that, with a modified design, this device type should operate in the single-phonon nonlinear regime. Accessing this regime has been a long-standing goal that would greatly facilitate quantum operations of mechanical resonators.
△ Less
Submitted 23 January, 2025;
originally announced January 2025.
-
Optomechanics driven by noisy and narrowband fields
Authors:
Louise Banniard,
Cheng Wang,
Davide Stirpe,
Kjetil Børkje,
Francesco Massel,
Laure Mercier de Lépinay,
Mika A. Sillanpää
Abstract:
We report a study of a cavity optomechanical system driven by narrow-band electromagnetic fields, which are applied either in the form of uncorrelated noise, or as a more structured spectrum. The bandwidth of the driving spectra is smaller than the mechanical resonant frequency, and thus we can describe the resulting physics using concepts familiar from regular cavity optomechanics in the resolved…
▽ More
We report a study of a cavity optomechanical system driven by narrow-band electromagnetic fields, which are applied either in the form of uncorrelated noise, or as a more structured spectrum. The bandwidth of the driving spectra is smaller than the mechanical resonant frequency, and thus we can describe the resulting physics using concepts familiar from regular cavity optomechanics in the resolved-sideband limit. With a blue-detuned noise driving, the noise-induced interaction leads to anti-damping of the mechanical oscillator, and a self-oscillation threshold at an average noise power that is comparable to that of a coherent driving tone. This process can be seen as noise-induced dynamical amplification of mechanical motion. However, when the noise bandwidth is reduced down to the order of the mechanical damping, we discover a large shift of the power threshold of self-oscillation. This is due to the oscillator adiabatically following the instantaneous noise profile. In addition to blue-detuned noise driving, we investigate narrow-band driving consisting of two coherent drive tones nearby in frequency. Also in these cases, we observe deviations from a naive optomechanical description relying only on the tones' frequencies and powers.
△ Less
Submitted 1 June, 2024;
originally announced June 2024.
-
Near-ground state cooling in electromechanics using measurement-based feedback and Josephson parametric amplifier
Authors:
Ewa Rej,
Richa Cutting,
Debopam Datta,
Nils Tiencken,
Joonas Govenius,
Visa Vesterinen,
Yulong Liu,
Mika A. Sillanpää
Abstract:
Feedback-based control of nano- and micromechanical resonators can enable the study of macroscopic quantum phenomena and also sensitive force measurements. Here, we demonstrate the feedback cooling of a low-loss and high-stress macroscopic SiN membrane resonator close to its quantum ground state. We use the microwave optomechanical platform, where the resonator is coupled to a microwave cavity. Th…
▽ More
Feedback-based control of nano- and micromechanical resonators can enable the study of macroscopic quantum phenomena and also sensitive force measurements. Here, we demonstrate the feedback cooling of a low-loss and high-stress macroscopic SiN membrane resonator close to its quantum ground state. We use the microwave optomechanical platform, where the resonator is coupled to a microwave cavity. The experiment utilizes a Josephson travelling wave parametric amplifier, which is nearly quantum-limited in added noise, and is important to mitigate resonator heating due to system noise in the feedback loop. We reach a thermal phonon number as low as 1.6, which is limited primarily by microwave-induced heating. We also discuss the sideband asymmetry observed when a weak microwave tone for independent readout is applied in addition to other tones used for the cooling. The asymmetry can be qualitatively attributed to the quantum-mechanical imbalance between emission and absorption. However, we find that the observed asymmetry is only partially due to this quantum effect. In specific situations, the asymmetry is fully dominated by a cavity Kerr effect under multitone irradiation.
△ Less
Submitted 4 March, 2024;
originally announced March 2024.
-
Degeneracy-breaking and Long-lived Multimode Microwave Electromechanical Systems Enabled by Cubic Silicon-Carbide Membrane Crystals
Authors:
Yulong Liu,
Huanying Sun,
Qichun Liu,
Haihua Wu,
Mika A. Sillanpää,
Tiefu Li
Abstract:
Cubic silicon-carbide crystals (3C-SiC), known for their high thermal conductivity and in-plane stress, hold significant promise for the development of high-quality ($Q$) mechanical oscillators. We reveal degeneracy-breaking phenomena in 3C-phase crystalline silicon-carbide membrane and present high-$Q$ mechanical modes in pairs or clusters. The 3C-SiC material demonstrates excellent microwave com…
▽ More
Cubic silicon-carbide crystals (3C-SiC), known for their high thermal conductivity and in-plane stress, hold significant promise for the development of high-quality ($Q$) mechanical oscillators. We reveal degeneracy-breaking phenomena in 3C-phase crystalline silicon-carbide membrane and present high-$Q$ mechanical modes in pairs or clusters. The 3C-SiC material demonstrates excellent microwave compatibility with superconducting circuits. Thus, we can establish a coherent electromechanical interface, enabling precise control over 21 high-$Q$ mechanical modes from a single 3C-SiC square membrane. Benefiting from extremely high mechanical frequency stability, this interface enables tunable light slowing with group delays extending up to an impressive duration of \emph{an hour}. Coherent energy transfer between distinct mechanical modes are also presented. In this work, the studied 3C-SiC membrane crystal with their significant properties of multiple acoustic modes and high-quality factors, provide unique opportunities for the encoding, storage, and transmission of quantum information via bosonic phonon channels.
△ Less
Submitted 11 February, 2025; v1 submitted 1 January, 2024;
originally announced January 2024.
-
Coupling high-overtone bulk acoustic wave resonators via superconducting qubits
Authors:
Wayne Crump,
Alpo Välimaa,
Mika A. Sillanpää
Abstract:
In this work, we present a device consisting of two coupled transmon qubits, each of which are coupled to an independent high-overtone bulk acoustic wave resonator (HBAR). Both HBAR resonators support a plethora of acoustic modes, which can couple to the qubit near resonantly. We first show qubit-qubit interaction in the multimode system, and finally quantum state transfer where an excitation is s…
▽ More
In this work, we present a device consisting of two coupled transmon qubits, each of which are coupled to an independent high-overtone bulk acoustic wave resonator (HBAR). Both HBAR resonators support a plethora of acoustic modes, which can couple to the qubit near resonantly. We first show qubit-qubit interaction in the multimode system, and finally quantum state transfer where an excitation is swapped from an HBAR mode of one qubit, to an HBAR mode of the other qubit.
△ Less
Submitted 8 July, 2023;
originally announced July 2023.
-
Ground-state cooling of a mechanical oscillator by heating
Authors:
Cheng Wang,
Louise Banniard,
Kjetil Børkje,
Francesco Massel,
Laure Mercier de Lépinay,
Mika A. Sillanpää
Abstract:
Dissipation and the accompanying fluctuations are often seen as detrimental for quantum systems, since they are associated with fast relaxation and loss of phase coherence. However, it has been proposed that a pure state can be prepared if external noise induces suitable downwards transitions, while exciting transitions are blocked. We demonstrate such a refrigeration mechanism in a cavity optomec…
▽ More
Dissipation and the accompanying fluctuations are often seen as detrimental for quantum systems, since they are associated with fast relaxation and loss of phase coherence. However, it has been proposed that a pure state can be prepared if external noise induces suitable downwards transitions, while exciting transitions are blocked. We demonstrate such a refrigeration mechanism in a cavity optomechanical system, where we prepare a mechanical oscillator in its ground state by injecting strong electromagnetic noise at frequencies around the red mechanical sideband of the cavity. The optimum cooling is reached with a noise bandwidth smaller than, but on the order of the cavity decay rate. At higher bandwidths, cooling is less efficient. In the opposite regime where the noise bandwidth becomes comparable to the mechanical damping rate, damping follows the noise amplitude adiabatically, and the cooling is also suppressed.
△ Less
Submitted 27 June, 2023;
originally announced June 2023.
-
Fast feedback control of mechanical motion using circuit optomechanics
Authors:
Cheng Wang,
Louise Banniard,
Laure Mercier de Lépinay,
Mika A. Sillanpää
Abstract:
Measurement-based control, utilizing an active feedback loop, is a standard tool in technology. Feedback control is also emerging as a useful and fundamental tool in quantum technology and in related fundamental studies, where it can be used to prepare and stabilize pure quantum states in various quantum systems. Feedback-cooling of center-of-mass micromechanical oscillators, which typically exhib…
▽ More
Measurement-based control, utilizing an active feedback loop, is a standard tool in technology. Feedback control is also emerging as a useful and fundamental tool in quantum technology and in related fundamental studies, where it can be used to prepare and stabilize pure quantum states in various quantum systems. Feedback-cooling of center-of-mass micromechanical oscillators, which typically exhibit a high thermal noise far above the quantum regime has been particularly actively studied and has recently been shown to allow for ground-state cooling using optical measurements. Here, we realize measurement-based feedback operations in an electromechanical system, cooling the mechanical thermal noise down to 3 quanta, limited by added amplifier noise. Counter-intuitively, we also obtain significant cooling when the system is pumped at the blue optomechanical sideband, where the system is unstable without feedback.
△ Less
Submitted 28 November, 2022;
originally announced November 2022.
-
Quantum backaction evading measurements of a silicon nitride membrane resonator
Authors:
Yulong Liu,
Jingwei Zhou,
Laure Mercier de Lépinay,
Mika A. Sillanpää
Abstract:
Quantum backaction disturbs the measurement of the position of a mechanical oscillator by introducing additional fluctuations. In a quantum backaction measurement technique, the backaction can be evaded, although at the cost of losing part of the information. In this work, we carry out such a quantum backaction measurement using a large 0.5 mm diameter silicon nitride membrane oscillator with 707…
▽ More
Quantum backaction disturbs the measurement of the position of a mechanical oscillator by introducing additional fluctuations. In a quantum backaction measurement technique, the backaction can be evaded, although at the cost of losing part of the information. In this work, we carry out such a quantum backaction measurement using a large 0.5 mm diameter silicon nitride membrane oscillator with 707 kHz frequency, via a microwave cavity readout. The measurement shows that quantum backaction noise can be evaded in the quadrature measurement of the motion of a large object.
△ Less
Submitted 26 January, 2022;
originally announced January 2022.
-
Optomechanical Anti-lasing with Infinite Group Delay at a Phase Singularity
Authors:
Yulong Liu,
Qichun Liu,
Shuaipeng Wang,
Zhen Chen,
Mika A. Sillanpää,
Tiefu Li
Abstract:
Singularities that symbolize abrupt changes and exhibit extraordinary behavior are of broad interest. We experimentally study optomechanically induced singularities in a compound system consisting of a three-dimensional aluminum superconducting cavity and a metalized high-coherence silicon nitride membrane resonator. Mechanically-induced coherent perfect absorption and anti-lasing occur simultaneo…
▽ More
Singularities that symbolize abrupt changes and exhibit extraordinary behavior are of broad interest. We experimentally study optomechanically induced singularities in a compound system consisting of a three-dimensional aluminum superconducting cavity and a metalized high-coherence silicon nitride membrane resonator. Mechanically-induced coherent perfect absorption and anti-lasing occur simultaneously under a critical optomechanical coupling strength. Meanwhile, the phase around the cavity resonance undergoes an abrupt $π$-phase transition, which further flips the phase slope in the frequency dependence. The observed infinite-discontinuity in the phase slope defines a singularity, at which the group velocity is dramatically changed. Around the singularity, an abrupt transition from an infinite group advance to delay is demonstrated by measuring a Gaussian-shaped waveform propagating. Our experiment may broaden the scope of realizing extremely long group delays by taking advantage of singularities.
△ Less
Submitted 13 December, 2021;
originally announced December 2021.
-
Multiphonon transitions in a quantum electromechanical system
Authors:
Alpo Välimaa,
Wayne Crump,
Mikael Kervinen,
Mika A. Sillanpää
Abstract:
We investigate a superconducting qubit coupled to a quantum acoustic system in a near resonant configuration. In our system we measure multiphonon transitions, whose spectrum reveals distinctly nonclassical features and thus provides direct evidence of quantization of GHz sound, enabling phonon counting. Additionally, at a high driving amplitude comparable to the qubit-oscillator coupling, we obse…
▽ More
We investigate a superconducting qubit coupled to a quantum acoustic system in a near resonant configuration. In our system we measure multiphonon transitions, whose spectrum reveals distinctly nonclassical features and thus provides direct evidence of quantization of GHz sound, enabling phonon counting. Additionally, at a high driving amplitude comparable to the qubit-oscillator coupling, we observe a shift of the multiphonon spectral lines owing to dressing of many multiphonon transitions.
△ Less
Submitted 13 August, 2021;
originally announced August 2021.
-
Magnomechanics in suspended magnetic beams
Authors:
Kalle S. U. Kansanen,
Camillo Tassi,
Harshad Mishra,
Mika A. Sillanpää,
Tero T. Heikkilä
Abstract:
Cavity optomechanical systems have become a popular playground for studies of controllable nonlinear interactions between light and motion. Owing to the large speed of light, realizing cavity optomechanics in the microwave frequency range requires cavities up to several mm in size, hence making it hard to embed several of them on the same chip. An alternative scheme with much smaller footprint is…
▽ More
Cavity optomechanical systems have become a popular playground for studies of controllable nonlinear interactions between light and motion. Owing to the large speed of light, realizing cavity optomechanics in the microwave frequency range requires cavities up to several mm in size, hence making it hard to embed several of them on the same chip. An alternative scheme with much smaller footprint is provided by magnomechanics, where the electromagnetic cavity is replaced by a magnet undergoing ferromagnetic resonance, and the optomechanical coupling originates from magnetic shape anisotropy. Here, we consider the magnomechanical interaction occurring in a suspended magnetic beam -- a scheme in which both magnetic and mechanical modes physically overlap and can also be driven individually. We show that a sizable interaction can be produced if the beam has some initial static deformation, as is often the case due to unequal strains in the constituent materials. We also show how the magnetism affects the magnetomotive detection of the vibrations, and how the magnomechanics interaction can be used in microwave signal amplification. Finally, we discuss experimental progress towards realizing the scheme.
△ Less
Submitted 7 December, 2021; v1 submitted 2 July, 2021;
originally announced July 2021.
-
Energy-level-attraction and heating-resistant-cooling of mechanical resonators with exceptional points
Authors:
Cheng Jiang,
Yu-Long Liu,
Mika A. Sillanpää
Abstract:
We study the energy-level evolution and ground-state cooling of mechanical resonators under a synthetic phononic gauge field. The tunable gauge phase is mediated by the phase difference between the $\mathcal{PT}$- and anti-$\mathcal{PT}$-symmetric mechanical couplings in a multimode optomechanical system. The transmission spectrum then exhibits the asymmetric Fano line shape or double optomechanic…
▽ More
We study the energy-level evolution and ground-state cooling of mechanical resonators under a synthetic phononic gauge field. The tunable gauge phase is mediated by the phase difference between the $\mathcal{PT}$- and anti-$\mathcal{PT}$-symmetric mechanical couplings in a multimode optomechanical system. The transmission spectrum then exhibits the asymmetric Fano line shape or double optomechanically induced transparency by modulating the gauge phase. Moreover, the eigenvalues will collapse and become degenerate although the mechanical coupling is continuously increased. Such counterintuitive energy-attraction, instead of anti-crossing, attributes to destructive interferences between $\mathcal{PT}$- and anti-$\mathcal{PT}$-symmetric couplings. We find that the energy-attraction, as well as the accompanied exceptional points (EPs), can be more intuitively observed in the cavity output power spectrum where the mechanical eigenvalues correspond to the peaks. For mechanical cooling, the average phonon occupation number becomes minimum at these EPs. Especially, phonon transport becomes nonreciprocal and even ideally unidirectional at the EPs. Finally, we propose a heating-resistant ground-state cooling based on the nonreciprocal phonon transport, which is mediated by the gauge field. Towards the quantum regime of macroscopic mechanical resonators, most optomechanical systems are ultimately limited by their intrinsic cavity or mechanical heating. Our work revealed that the thermal energy transfer can be blocked by tuning the gauge phase, which supports a promising route to overpass the notorious heating limitations.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Quantum-mechanics free subsystem with mechanical oscillators
Authors:
Laure Mercier de Lépinay,
Caspar F. Ockeloen-Korppi,
Matthew J. Woolley,
Mika A. Sillanpää
Abstract:
Quantum mechanics sets a limit for the precision of continuous measurement of the position of an oscillator. Here we show how it is possible to measure an oscillator without quantum backaction of the measurement by constructing one effective oscillator from two physical oscillators. We realize such a quantum-mechanics free subsystem using two micromechanical oscillators, and show the measurements…
▽ More
Quantum mechanics sets a limit for the precision of continuous measurement of the position of an oscillator. Here we show how it is possible to measure an oscillator without quantum backaction of the measurement by constructing one effective oscillator from two physical oscillators. We realize such a quantum-mechanics free subsystem using two micromechanical oscillators, and show the measurements of two collective quadratures while evading the quantum backaction by $8$ decibels on both of them, obtaining a total noise within a factor two of the full quantum limit. This facilitates detection of weak forces and the generation and measurement of nonclassical motional states of the oscillators. Moreover, we directly verify the quantum entanglement of the two oscillators by measuring the Duan quantity $1.4$ decibels below the separability bound.
△ Less
Submitted 12 May, 2021; v1 submitted 27 September, 2020;
originally announced September 2020.
-
Prospects for observing gravitational forces between nonclassical mechanical oscillators
Authors:
Yulong Liu,
Jay Mummery,
Mika A. Sillanpää
Abstract:
Interfacing quantum mechanics and gravity is one of the great open questions in natural science. Micromechanical oscillators have been suggested as a plausible platform to carry out these experiments. We present an experimental design aiming at these goals, inspired by Schmöle et al., Class. Quantum Grav. 33, 125031 (2016). Gold spheres weighing on the order a milligram will be positioned on large…
▽ More
Interfacing quantum mechanics and gravity is one of the great open questions in natural science. Micromechanical oscillators have been suggested as a plausible platform to carry out these experiments. We present an experimental design aiming at these goals, inspired by Schmöle et al., Class. Quantum Grav. 33, 125031 (2016). Gold spheres weighing on the order a milligram will be positioned on large silicon nitride membranes, which are spaced at submillimeter distances from each other. These mass-loaded membranes are mechanical oscillators that vibrate at $\sim 2$ kHz frequencies in a drum mode. They are operated and measured by coupling to microwave cavities. First, we show that it is possible to measure the gravitational force between the oscillators at deep cryogenic temperatures, where thermal mechanical noise is strongly suppressed. We investigate the measurement of gravity when the positions of the gravitating masses exhibit significant quantum fluctuations, including preparation of the massive oscillators in the ground state, or in a squeezed state. We also present a plausible scheme to realize an experiment where the two oscillators are prepared in a two-mode squeezed motional quantum state that exhibits nonlocal quantum correlations and gravity the same time. Although the gravity is classical, the experiment will pave the way for testing true quantum gravity in related experimental arrangements. In a proof-of-principle experiment, we operate a 1.7 mm diameter Si$_3$N$_4$ membrane loaded by a 1.3 mg gold sphere. At 10 mK temperature, we observe the drum mode with a quality factor above half a million at 1.7 kHz, showing strong promise for the experiments. Following implementation of vibration isolation, cryogenic positioning, and phase noise filtering, we foresee that realizing the experiments is in reach by combining known pieces of current technology.
△ Less
Submitted 7 October, 2020; v1 submitted 24 August, 2020;
originally announced August 2020.
-
Sideband control of a multimode quantum bulk acoustic system
Authors:
Mikael Kervinen,
Alpo Välimaa,
Jhon E. Ramírez-Muñoz,
Mika A. Sillanpää
Abstract:
Multimode bulk acoustic systems show promise for use in superconducting quantum computation. They can serve as a medium term memory storage, with exceptional coherence times demonstrated, and they exhibit a mode density that is physically highly compact. Here we experimentally demonstrate accessing individual acoustic modes without being hindered by the uniform frequency spacing of the modes. We u…
▽ More
Multimode bulk acoustic systems show promise for use in superconducting quantum computation. They can serve as a medium term memory storage, with exceptional coherence times demonstrated, and they exhibit a mode density that is physically highly compact. Here we experimentally demonstrate accessing individual acoustic modes without being hindered by the uniform frequency spacing of the modes. We use sideband control where a low-frequency modulation is applied to the transmon qubit energy. The amplitude of the modulation defines the qubit-acoustic mode coupling, and its frequency detunes the acoustic sidebands, therefore enabling selectively switching on or off the interaction, and allows for a full control on the individual modes.
△ Less
Submitted 9 June, 2020;
originally announced June 2020.
-
Nonreciprocal transport based on cavity Floquet modes in optomechanics
Authors:
Laure Mercier de Lépinay,
Caspar F. Ockeloen-Korppi,
Daniel Malz,
Mika A. Sillanpää
Abstract:
Directional transport is obtained in various multimode systems by driving multiple, nonreciprocally-interfering interactions between individual bosonic modes. However, systems sustaining the required number of modes become physically complex. In our microwave-optomechanical experiment, we show how to configure nonreciprocal transport between frequency components of a single superconducting cavity…
▽ More
Directional transport is obtained in various multimode systems by driving multiple, nonreciprocally-interfering interactions between individual bosonic modes. However, systems sustaining the required number of modes become physically complex. In our microwave-optomechanical experiment, we show how to configure nonreciprocal transport between frequency components of a single superconducting cavity coupled to two drumhead oscillators. The frequency components are promoted to Floquet modes and generate the missing dimension to realize an isolator and a directional amplifier. A second cavity left free by this arrangement is used to cool the mechanical oscillators and bring the transduction noise close to the quantum limit. We furthermore uncover a new type of instability specific to nonreciprocal coupling. Our approach is generic and can greatly simplify quantum signal processing and the design of topological lattices from low-dimensional systems.
△ Less
Submitted 22 December, 2019;
originally announced December 2019.
-
Landau-Zener-Stückelberg interference in a multimode electromechanical system in the quantum regime
Authors:
Mikael Kervinen,
Jhon E. Ramírez-Muñoz,
Alpo Välimaa,
Mika A. Sillanpää
Abstract:
The studies of mechanical resonators in the quantum regime not only provide insight into the fundamental nature of quantum mechanics of massive objects, but also introduce promising platforms for novel hybrid quantum technologies. Here we demonstrate a configurable interaction between a superconducting qubit and many acoustic modes in the quantum regime. Specifically, we show how consecutive Landa…
▽ More
The studies of mechanical resonators in the quantum regime not only provide insight into the fundamental nature of quantum mechanics of massive objects, but also introduce promising platforms for novel hybrid quantum technologies. Here we demonstrate a configurable interaction between a superconducting qubit and many acoustic modes in the quantum regime. Specifically, we show how consecutive Landau-Zener-Stückelberg (LZS) tunneling type of transitions, which take place when a system is tuned through an avoided crossing of the coupled energy levels, interfere in a multimode system. The work progresses experimental LZS interference to cover situations where the coupled levels are those of a qubit interacting with a multitude of mechanical oscillators in the quantum limit. The work opens up applications in controlling multiple acoustic modes via parametric modulation.
△ Less
Submitted 17 September, 2019;
originally announced September 2019.
-
Realization of directional amplification in a microwave optomechanical device
Authors:
L. Mercier de Lépinay,
E. Damskägg,
C. F. Ockeloen-Korppi,
M. A. Sillanpää
Abstract:
Directional transmission or amplification of microwave signals is indispensable in various applications involving sensitive measurements. In this work we show in experiment how to use a generic cavity optomechanical setup to non-reciprocally amplify microwave signals above 3 GHz in one direction by 9 decibels, and simultaneously attenuate the transmission in the opposite direction by 21 decibels.…
▽ More
Directional transmission or amplification of microwave signals is indispensable in various applications involving sensitive measurements. In this work we show in experiment how to use a generic cavity optomechanical setup to non-reciprocally amplify microwave signals above 3 GHz in one direction by 9 decibels, and simultaneously attenuate the transmission in the opposite direction by 21 decibels. We use a device including two on-chip superconducting resonators and two metallic drumhead mechanical oscillators. Application of four microwave pump tone frequencies allows for designing constructive or destructive interference for a signal tone depending on the propagation direction. The device can also be configured as an isolator with a lossless nonreciprocal transmission and 18 dB of isolation.
△ Less
Submitted 14 November, 2018;
originally announced November 2018.
-
Sideband cooling of nearly degenerate micromechanical oscillators in a multimode optomechanical system
Authors:
C. F. Ockeloen-Korppi,
M. F. Gely,
E. Damskägg,
M. Jenkins,
G. A. Steele,
M. A. Sillanpää
Abstract:
Multimode optomechanical systems are an emerging platform for studying fundamental aspects of matter near the quantum ground state and are useful in sensitive sensing and measurement applications. We study optomechanical cooling in a system where two nearly degenerate mechanical oscillators are coupled to a single microwave cavity. Due to an optically mediated coupling the two oscillators hybridiz…
▽ More
Multimode optomechanical systems are an emerging platform for studying fundamental aspects of matter near the quantum ground state and are useful in sensitive sensing and measurement applications. We study optomechanical cooling in a system where two nearly degenerate mechanical oscillators are coupled to a single microwave cavity. Due to an optically mediated coupling the two oscillators hybridize into a bright mode with strong optomechanical cooling rate and a dark mode nearly decoupled from the system. We find that at high coupling, sideband cooling of the dark mode is strongly suppressed. Our results are relevant to novel optomechanical systems where multiple closely-spaced modes are intrinsically present.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
Revealing hidden quantum correlations in an electromechanical measurement
Authors:
C. F. Ockeloen-Korppi,
E. Damskägg,
G. S. Paraoanu,
F. Massel,
M. A. Sillanpää
Abstract:
Under a strong quantum measurement, the motion of an oscillator is disturbed by the measurement back-action, as required by the Heisenberg uncertainty principle. When a mechanical oscillator is continuously monitored via an electromagnetic cavity, as in a cavity optomechanical measurement, the back-action is manifest by the shot noise of incoming photons that becomes imprinted onto the motion of t…
▽ More
Under a strong quantum measurement, the motion of an oscillator is disturbed by the measurement back-action, as required by the Heisenberg uncertainty principle. When a mechanical oscillator is continuously monitored via an electromagnetic cavity, as in a cavity optomechanical measurement, the back-action is manifest by the shot noise of incoming photons that becomes imprinted onto the motion of the oscillator. Following the photons leaving the cavity, the correlations appear as squeezing of quantum noise in the emitted field. Here we observe such "ponderomotive" squeezing in the microwave domain using an electromechanical device made out of a superconducting resonator and a drumhead mechanical oscillator. Under a strong measurement, the emitted field develops complex-valued quantum correlations, which in general are not completely accessible by standard homodyne measurements. We recover these hidden correlations, using a phase-sensitive measurement scheme employing two local oscillators. The utilization of hidden correlations presents a step forward in the detection of weak forces, as it allows to fully utilize the quantum noise reduction under the conditions of strong force sensitivity.
△ Less
Submitted 7 September, 2018;
originally announced September 2018.
-
Entangled massive mechanical oscillators
Authors:
C. F. Ockeloen-Korppi,
E. Damskagg,
J. -M. Pirkkalainen,
A. A. Clerk,
F. Massel,
M. J. Woolley,
M. A. Sillanpaa
Abstract:
An entangled quantum state of two or more particles or objects exhibits some of the most peculiar features of quantum mechanics. Entangled systems cannot be described independently of each other even though they may have an arbitrarily large spatial separation. Reconciling this property with the inherent uncertainty in quantum states is at the heart of some of the most famous debates in the develo…
▽ More
An entangled quantum state of two or more particles or objects exhibits some of the most peculiar features of quantum mechanics. Entangled systems cannot be described independently of each other even though they may have an arbitrarily large spatial separation. Reconciling this property with the inherent uncertainty in quantum states is at the heart of some of the most famous debates in the development of quantum theory. Nonetheless, entanglement nowadays has a solid theoretical and experimental foundation, and it is the crucial resource behind many emerging quantum technologies. Entanglement has been demonstrated for microscopic systems, such as with photons, ions, and electron spins, and more recently in microwave and electromechanical devices. For macroscopic objects, however, entanglement becomes exceedingly fragile towards environmental disturbances. A major outstanding goal has been to create and verify the entanglement between the motional states of slowly-moving massive objects. Here, we carry out such an experimental demonstration, with the moving bodies realized as two micromechanical oscillators coupled to a microwave-frequency electromagnetic cavity that is used to create and stabilise the entanglement of the centre-of-mass motion of the oscillators. We infer the existence of entanglement in the steady state by combining measurement of correlated mechanical fluctuations with an analysis of the microwaves emitted from the cavity. Our work qualitatively extends the range of entangled physical systems, with implications in quantum information processing, precision measurement, and tests of the limits of quantum mechanics.
△ Less
Submitted 5 November, 2017;
originally announced November 2017.
-
Noiseless quantum measurement and squeezing of microwave fields utilizing mechanical vibrations
Authors:
C. F. Ockeloen-Korppi,
E. Damskägg,
J. -M. Pirkkalainen,
T. T. Heikkilä,
F. Massel,
M. A. Sillanpää
Abstract:
A process which strongly amplifies both quadrature amplitudes of an oscillatory signal necessarily adds noise. Alternatively, if the information in one quadrature is lost in phase-sensitive amplification, it is possible to completely reconstruct the other quadrature. Here we demonstrate such a nearly perfect phase-sensitive measurement using a cavity optomechanical scheme, characterized by an extr…
▽ More
A process which strongly amplifies both quadrature amplitudes of an oscillatory signal necessarily adds noise. Alternatively, if the information in one quadrature is lost in phase-sensitive amplification, it is possible to completely reconstruct the other quadrature. Here we demonstrate such a nearly perfect phase-sensitive measurement using a cavity optomechanical scheme, characterized by an extremely small noise less than 0.2 quanta. We also observe microwave radiation strongly squeezed by 8 dB below vacuum. A source of bright squeezed microwaves opens up applications in manipulations of quantum systems, and noiseless amplification can be used even at modest cryogenic temperatures.
△ Less
Submitted 31 October, 2016;
originally announced October 2016.
-
Theory of noiseless phase-mixing amplification in a cavity optomechanical system
Authors:
C. F. Ockeloen-Korppi,
T. T. Heikkilä,
M. A. Sillanpää,
F. Massel
Abstract:
The investigation of the ultimate limits imposed by quantum mechanics on amplification represents an important topic both on a fundamental level and from the perspective of potential applications. We propose here a novel setup for an optomechanical amplifier, constituted by a mechanical resonator dispersively coupled to an optomechanical cavity asymmetrically driven around both mechanical sideband…
▽ More
The investigation of the ultimate limits imposed by quantum mechanics on amplification represents an important topic both on a fundamental level and from the perspective of potential applications. We propose here a novel setup for an optomechanical amplifier, constituted by a mechanical resonator dispersively coupled to an optomechanical cavity asymmetrically driven around both mechanical sidebands. We show that, on general grounds, the present amplifier operates in a novel regime-- which we here call phase-mixing amplification. At the same time, for a suitable choice of parameters, the amplifier proposed here operates as a phase-sensitive amplifier. Furthermore, we show that both configurations allow amplification below the standard quantum limit in a parameter range compatible with current experiments in microwave circuit optomechanics.
△ Less
Submitted 25 October, 2016; v1 submitted 24 October, 2016;
originally announced October 2016.
-
Dynamically creating tripartite resonance and dark modes in a multimode optomechanical system
Authors:
E. Damskägg,
J. -M. Pirkkalainen,
M. A. Sillanpää
Abstract:
We study a multimode optomechanical system where two mechanical oscillators are coupled to an electromagnetic cavity. Previously it has been shown that if the mechanical resonances have nearly equal frequencies, one can make the oscillators to interact via the cavity by strong pumping with a coherent pump tone. One can view the interaction also as emergence of an electromagnetically dark mode whic…
▽ More
We study a multimode optomechanical system where two mechanical oscillators are coupled to an electromagnetic cavity. Previously it has been shown that if the mechanical resonances have nearly equal frequencies, one can make the oscillators to interact via the cavity by strong pumping with a coherent pump tone. One can view the interaction also as emergence of an electromagnetically dark mode which gets asymptotically decoupled from the cavity and has a linewidth much smaller than that of the bare cavity. The narrow linewidth and long lifetime of the dark mode could be advantageous for example in information storage and processing. Here we investigate the possibility to create dark modes dynamically using two pump tones. We show that if the mechanical frequencies are intrinsically different, one can bring the mechanical oscillators and the cavity on-resonance and thus create a dark mode by double sideband pumping of the cavity. We realize the scheme in a microwave optomechanical device employing two drum oscillators with unmatched frequencies, ω_1 /2π = 8.1MHz and ω_2 /2π = 14.2MHz. We also observe a breakdown of the rotating-wave approximation, most pronounced in another device where the mechanical frequencies are close to each other.
△ Less
Submitted 28 September, 2016;
originally announced September 2016.
-
Quantum back-action evading measurement of collective mechanical modes
Authors:
C. F. Ockeloen-Korppi,
E. Damskägg,
J. -M. Pirkkalainen,
A. A. Clerk,
M. J. Woolley,
M. A. Sillanpää
Abstract:
The standard quantum limit constrains the precision of an oscillator position measurement. It arises from a balance between the imprecision and the quantum back-action of the measurement. However, a measurement of only a single quadrature of the oscillator can evade the back-action and be made with arbitrary precision. Here we demonstrate quantum back-action evading measurements of a collective qu…
▽ More
The standard quantum limit constrains the precision of an oscillator position measurement. It arises from a balance between the imprecision and the quantum back-action of the measurement. However, a measurement of only a single quadrature of the oscillator can evade the back-action and be made with arbitrary precision. Here we demonstrate quantum back-action evading measurements of a collective quadrature of two mechanical oscillators, both coupled to a common microwave cavity. The work allows for quantum state tomography of two mechanical oscillators, and provides a foundation for macroscopic mechanical entanglement and force sensing beyond conventional quantum limits.
△ Less
Submitted 27 September, 2016; v1 submitted 22 August, 2016;
originally announced August 2016.
-
Low-noise amplification and frequency conversion with a multiport microwave optomechanical device
Authors:
C. F. Ockeloen-Korppi,
E. Damskägg,
J. -M. Pirkkalainen,
T. T. Heikkilä,
F. Massel,
M. A. Sillanpää
Abstract:
High-gain amplifiers of electromagnetic signals operating near the quantum limit are crucial for quantum information systems and ultrasensitive quantum measurements. However, the existing techniques have a limited gain-bandwidth product and only operate with weak input signals. Here we demonstrate a two-port optomechanical scheme for amplification and routing of microwave signals, a system that si…
▽ More
High-gain amplifiers of electromagnetic signals operating near the quantum limit are crucial for quantum information systems and ultrasensitive quantum measurements. However, the existing techniques have a limited gain-bandwidth product and only operate with weak input signals. Here we demonstrate a two-port optomechanical scheme for amplification and routing of microwave signals, a system that simultaneously performs high-gain amplification and frequency conversion in the quantum regime. Our amplifier, implemented in a two-cavity microwave optomechanical device, shows 41 dB of gain and has a high dynamic range, handling input signals up to $10^{13}$ photons per second, three orders of magnitude more than corresponding Josephson parametric amplifiers. We show that although the active medium, the mechanical resonator, is at a high temperature far from the quantum limit, only 4.6 quanta of noise is added to the input signal. Our method can be readily applied to a wide variety of optomechanical systems, including hybrid optical-microwave systems, creating a universal hub for signals at the quantum level.
△ Less
Submitted 18 February, 2016;
originally announced February 2016.
-
Squeezing of quantum noise of motion in a micromechanical resonator
Authors:
J. -M. Pirkkalainen,
E. Damskägg,
M. Brandt,
F. Massel,
M. A. Sillanpää
Abstract:
A pair of conjugate observables, such as the quadrature amplitudes of harmonic motion, have fundamental fluctuations which are bound by the Heisenberg uncertainty relation. However, in a squeezed quantum state, fluctuations of a quantity can be reduced below the standard quantum limit, at the cost of increased fluctuations of the conjugate variable. Here we prepare a nearly macroscopic moving body…
▽ More
A pair of conjugate observables, such as the quadrature amplitudes of harmonic motion, have fundamental fluctuations which are bound by the Heisenberg uncertainty relation. However, in a squeezed quantum state, fluctuations of a quantity can be reduced below the standard quantum limit, at the cost of increased fluctuations of the conjugate variable. Here we prepare a nearly macroscopic moving body, realized as a micromechanical resonator, in a squeezed quantum state. We obtain squeezing of one quadrature amplitude $1.1 \pm 0.4$ dB below the standard quantum limit, thus achieving a long-standing goal of obtaining motional squeezing in a macroscopic object.
△ Less
Submitted 14 October, 2015; v1 submitted 15 July, 2015;
originally announced July 2015.
-
Single-photon cavity optomechanics mediated by a quantum two-level system
Authors:
J. -M. Pirkkalainen,
S. U. Cho,
F. Massel,
J. Tuorila,
T. T. Heikkila,
P. J. Hakonen,
M. A. Sillanpaa
Abstract:
Coupling electromagnetic waves in a cavity and mechanical vibrations via the radiation pressure of the photons [1,2] is a promising platform for investigations of quantum mechanical properties of motion of macroscopic bodies and thereby the limits of quantum mechanics [3,4]. A drawback is that the effect of one photon tends to be tiny, and hence one of the pressing challenges is to substantially i…
▽ More
Coupling electromagnetic waves in a cavity and mechanical vibrations via the radiation pressure of the photons [1,2] is a promising platform for investigations of quantum mechanical properties of motion of macroscopic bodies and thereby the limits of quantum mechanics [3,4]. A drawback is that the effect of one photon tends to be tiny, and hence one of the pressing challenges is to substantially increase the interaction strength towards the scale of the cavity damping rate. A novel scenario is to introduce into the setup a quantum two-level system (qubit), which, besides strengthening the coupling, allows for rich physics via strongly enhanced nonlinearities [5-8]. Addressing these issues, here we present a design of cavity optomechanics in the microwave frequency regime involving a Josephson junction qubit. We demonstrate boosting of the radiation pressure interaction energy by six orders of magnitude, allowing to approach the strong coupling regime, where a single quantum of vibrations shifts the cavity frequency by more than its linewidth. We observe nonlinear phenomena at single-photon energies, such as an enhanced damping due to the two-level system. This work opens up nonlinear cavity optomechanics as a plausible tool for the study of quantum properties of motion.
△ Less
Submitted 17 December, 2014;
originally announced December 2014.
-
Simulation of motional averaging using a superconducting circuit
Authors:
J. Li,
M. P. Silveri,
K. S. Kumar,
J. -M. Pirkkalainen,
A. Vepsäläinen,
W. C. Chien,
J. Tuorila,
M. A. Sillanpää,
P. J. Hakonen,
E. V. Thuneberg,
G. S. Paraoanu
Abstract:
The possibility of using a quantum system to simulate another one has been recognized for a long time as an important research direction in quantum information and quantum computing. In Ref. [J. Li et. al, Nat. Commun. 4, 1420 (2013)], a superconducting circuit (a transmon) was employed to simulate a NMR (nuclear magnetic resonance) effect known as motional averaging. In this paper we analyze the…
▽ More
The possibility of using a quantum system to simulate another one has been recognized for a long time as an important research direction in quantum information and quantum computing. In Ref. [J. Li et. al, Nat. Commun. 4, 1420 (2013)], a superconducting circuit (a transmon) was employed to simulate a NMR (nuclear magnetic resonance) effect known as motional averaging. In this paper we analyze the results of numerical integration of the time evolution of the density matrix of a qubit with random frequency fluctuations, and compare the results with those obtained by using the method of quantum trajectories. We show that both methods produce equivalent results, although some differences may appear in the range of intermediate modulation frequencies.
△ Less
Submitted 30 January, 2014;
originally announced January 2014.
-
Enhancing optomechanical coupling via the Josephson effect
Authors:
Tero T. Heikkilä,
Francesco Massel,
Jani Tuorila,
Raphaël Khan,
Mika A. Sillanpää
Abstract:
Cavity optomechanics is showing promise for studying quantum mechanics in large systems. However, smallness of the radiation-pressure coupling is a serious hindrance. Here we show how the charge tuning of the Josephson inductance in a single-Cooper-pair transistor (SCPT) can be exploited to arrange a strong radiation pressure -type coupling $g_0$ between mechanical and microwave resonators. In a c…
▽ More
Cavity optomechanics is showing promise for studying quantum mechanics in large systems. However, smallness of the radiation-pressure coupling is a serious hindrance. Here we show how the charge tuning of the Josephson inductance in a single-Cooper-pair transistor (SCPT) can be exploited to arrange a strong radiation pressure -type coupling $g_0$ between mechanical and microwave resonators. In a certain limit of parameters, such a coupling can also be seen as a qubit-mediated coupling of two resonators. We show that this scheme allows reaching extremely high $g_0$. Contrary to the recent proposals for exploiting the non-linearity of a large radiation pressure coupling, the main non-linearity in this setup originates from a cross-Kerr type of coupling between the resonators, where the cavity refractive index depends on the phonon number. The presence of this coupling will allow accessing the individual phonon numbers via the measurement of the cavity.
△ Less
Submitted 7 April, 2014; v1 submitted 15 November, 2013;
originally announced November 2013.
-
Hybrid circuit cavity quantum electrodynamics with a micromechanical resonator
Authors:
J. M. Pirkkalainen,
S. U. Cho,
Jian Li,
G. S. Paraoanu,
P. J. Hakonen,
M. A. Sillanpää
Abstract:
Hybrid quantum systems with inherently distinct degrees of freedom play a key role in many physical phenomena. Famous examples include cavity quantum electrodynamics, trapped ions, or electrons and phonons in the solid state. Here, a strong coupling makes the constituents loose their individual character and form dressed states. Apart from fundamental significance, hybrid systems can be exploited…
▽ More
Hybrid quantum systems with inherently distinct degrees of freedom play a key role in many physical phenomena. Famous examples include cavity quantum electrodynamics, trapped ions, or electrons and phonons in the solid state. Here, a strong coupling makes the constituents loose their individual character and form dressed states. Apart from fundamental significance, hybrid systems can be exploited for practical purpose, noteworthily in the emerging field of quantum information control. A promising direction is provided by the combination between long-lived atomic states and the accessible electrical degrees of freedom in superconducting cavities and qubits. Here we integrate circuit cavity quantum electrodynamics with phonons. Besides coupling to a microwave cavity, our superconducting transmon qubit interacts with a phonon mode in a micromechanical resonator, thus representing an atom coupled to two different cavities. We measure the phonon Stark shift, as well as the splitting of the qubit spectral line into motional sidebands, which feature transitions between the dressed electromechanical states. In the time domain, we observe coherent conversion of qubit excitation to phonons as sideband Rabi oscillations. This is a model system having potential for a quantum interface, which may allow for storage of quantum information in long-lived phonon states, coupling to optical photons, or for investigations of strongly coupled quantum systems near the classical limit.
△ Less
Submitted 18 March, 2013; v1 submitted 6 July, 2012;
originally announced July 2012.
-
Multimode circuit optomechanics near the quantum limit
Authors:
Francesco Massel,
Sung Un Cho,
Juha-Matti Pirkkalainen,
Pertti J. Hakonen,
Tero T. Heikkilä,
Mika A. Sillanpää
Abstract:
The coupling of distinct systems underlies nearly all physical phenomena and their applications. A basic instance is that of interacting harmonic oscillators, which gives rise to, for example, the phonon eigenmodes in a crystal lattice. Particularly important are the interactions in hybrid quantum systems consisting of different kinds of degrees of freedom. These assemblies can combine the benefit…
▽ More
The coupling of distinct systems underlies nearly all physical phenomena and their applications. A basic instance is that of interacting harmonic oscillators, which gives rise to, for example, the phonon eigenmodes in a crystal lattice. Particularly important are the interactions in hybrid quantum systems consisting of different kinds of degrees of freedom. These assemblies can combine the benefits of each in future quantum technologies. Here, we investigate a hybrid optomechanical system having three degrees of freedom, consisting of a microwave cavity and two micromechanical beams with closely spaced frequencies around 32 MHz and no direct interaction. We record the first evidence of tripartite optomechanical mixing, implying that the eigenmodes are combinations of one photonic and two phononic modes. We identify an asymmetric dark mode having a long lifetime. Simultaneously, we operate the nearly macroscopic mechanical modes close to the motional quantum ground state, down to 1.8 thermal quanta, achieved by back-action cooling. These results constitute an important advance towards engineering entangled motional states.
△ Less
Submitted 14 May, 2012;
originally announced May 2012.
-
Motional Averaging in a Superconducting Qubit
Authors:
Jian Li,
M. P. Silveri,
K. S. Kumar,
J. -M. Pirkkalainen,
A. Vepsäläinen,
W. C. Chien,
J. Tuorila,
M. A. Sillanpää,
P. J. Hakonen,
E. V. Thuneberg,
G. S. Paraoanu
Abstract:
Superconducting circuits with Josephson junctions are promising candidates for developing future quantum technologies. Of particular interest is to use these circuits to study effects that typically occur in complex condensed-matter systems. Here, we employ a superconducting quantum bit (qubit),a transmon, to carry out an analog simulation of motional averaging, a phenomenon initially observed in…
▽ More
Superconducting circuits with Josephson junctions are promising candidates for developing future quantum technologies. Of particular interest is to use these circuits to study effects that typically occur in complex condensed-matter systems. Here, we employ a superconducting quantum bit (qubit),a transmon, to carry out an analog simulation of motional averaging, a phenomenon initially observed in nuclear magnetic resonance (NMR) spectroscopy. To realize this effect, the flux bias of the transmon is modulated by a controllable pseudo-random telegraph noise, resulting in stochastic jumping of the energy separation between two discrete values. When the jumping is faster than a dynamical threshold set by the frequency displacement of the levels, the two separated spectral lines merge into a single narrow-width, motional-averaged line. With sinusoidal modulation a complex pattern of additional sidebands is observed. We demonstrate experimentally that the modulated system remains quantum coherent, with modified transition frequencies, Rabi couplings, and dephasing rates. These results represent the first steps towards more advanced quantum simulations using artificial atoms.
△ Less
Submitted 23 August, 2013; v1 submitted 3 May, 2012;
originally announced May 2012.
-
Microwave amplification with nanomechanical resonators
Authors:
F. Massel,
T. T. Heikkilä,
J. -M. Pirkkalainen,
S. U. Cho,
H. Saloniemi,
P. Hakonen,
M. A. Sillanpää
Abstract:
Sensitive measurement of electrical signals is at the heart of modern science and technology. According to quantum mechanics, any detector or amplifier is required to add a certain amount of noise to the signal, equaling at best the energy of quantum fluctuations. The quantum limit of added noise has nearly been reached with superconducting devices which take advantage of nonlinearities in Josephs…
▽ More
Sensitive measurement of electrical signals is at the heart of modern science and technology. According to quantum mechanics, any detector or amplifier is required to add a certain amount of noise to the signal, equaling at best the energy of quantum fluctuations. The quantum limit of added noise has nearly been reached with superconducting devices which take advantage of nonlinearities in Josephson junctions. Here, we introduce a new paradigm of amplification of microwave signals with the help of a mechanical oscillator. By relying on the radiation pressure force on a nanomechanical resonator, we provide an experimental demonstration and an analytical description of how the injection of microwaves induces coherent stimulated emission and signal amplification. This scheme, based on two linear oscillators, has the advantage of being conceptually and practically simpler than the Josephson junction devices, and, at the same time, has a high potential to reach quantum limited operation. With a measured signal amplification of 25 decibels and the addition of 20 quanta of noise, we anticipate near quantum-limited mechanical microwave amplification is feasible in various applications involving integrated electrical circuits.
△ Less
Submitted 25 July, 2011;
originally announced July 2011.
-
Macroscopic quantum tunneling in nanoelectromechanical systems
Authors:
Mika A. Sillanpaa,
Raphael Khan,
Tero T. Heikkila,
Pertti J. Hakonen
Abstract:
The experimental observation of quantum phenomena in mechanical degrees of freedom is difficult, as the systems become linear towards low energies and the quantum limit, and thus reside in the correspondence limit. Here we investigate how to access quantum phenomena in flexural nanomechanical systems which are strongly deflected by a voltage. Near a metastable point, one can achieve a significant…
▽ More
The experimental observation of quantum phenomena in mechanical degrees of freedom is difficult, as the systems become linear towards low energies and the quantum limit, and thus reside in the correspondence limit. Here we investigate how to access quantum phenomena in flexural nanomechanical systems which are strongly deflected by a voltage. Near a metastable point, one can achieve a significant nonlinearity in the electromechanical potential at the scale of zero point energy. The system could then escape from the metastable state via macroscopic quantum tunneling (MQT). We consider two model systems suspended atop a voltage gate, namely, a graphene sheet, and a carbon nanotube. We find that the experimental demonstration of the phenomenon is currently possible but demanding, since the MQT crossover temperatures fall in the milli-Kelvin range. A carbon nanotube is suggested as the most promising system.
△ Less
Submitted 23 November, 2011; v1 submitted 17 May, 2011;
originally announced May 2011.
-
Dynamical Autler-Townes control of a phase qubit
Authors:
Jian Li,
G. S. Paraoanu,
Katarina Cicak,
Fabio Altomare,
Jae I. Park,
Raymond W. Simmonds,
Mika A. Sillanpaa,
Pertti J. Hakonen
Abstract:
Routers, switches, and repeaters are essential components of modern information-processing systems. Similar devices will be needed in future superconducting quantum computers. In this work we investigate experimentally the time evolution of Autler-Townes splitting in a superconducting phase qubit under the application of a control tone resonantly coupled to the second transition. A three-level mod…
▽ More
Routers, switches, and repeaters are essential components of modern information-processing systems. Similar devices will be needed in future superconducting quantum computers. In this work we investigate experimentally the time evolution of Autler-Townes splitting in a superconducting phase qubit under the application of a control tone resonantly coupled to the second transition. A three-level model that includes independently determined parameters for relaxation and dephasing gives excellent agreement with the experiment. The results demonstrate that the qubit can be used as a ON/OFF switch with 100 ns operating time-scale for the reflection/transmission of photons coming from an applied probe microwave tone. The ON state is realized when the control tone is sufficiently strong to generate an Autler-Townes doublet, suppressing the absorption of the probe tone photons and resulting in a maximum of transmission.
△ Less
Submitted 11 December, 2012; v1 submitted 14 March, 2011;
originally announced March 2011.
-
Decoherence, Autler-Townes effect, and dark states in two-tone driving of a three-level superconducting system
Authors:
Jian Li,
G. S. Paraoanu,
Katarina Cicak,
Fabio Altomare,
Jae I. Park,
Raymond W. Simmonds,
Mika A. Sillanpaa,
Pertti J. Hakonen
Abstract:
We present a detailed theoretical analysis of a multi-level quantum system coupled to two radiation fields and subject to decoherence. We concentrate on an effect known from quantum optics as the Autler-Townes splitting, which has been recently demonstrated experimentally [M. A. Sillanpaa et al., Phys. Rev. Lett. 103, 193601 (2009)] in a superconducting phase qubit. In the three-level approximatio…
▽ More
We present a detailed theoretical analysis of a multi-level quantum system coupled to two radiation fields and subject to decoherence. We concentrate on an effect known from quantum optics as the Autler-Townes splitting, which has been recently demonstrated experimentally [M. A. Sillanpaa et al., Phys. Rev. Lett. 103, 193601 (2009)] in a superconducting phase qubit. In the three-level approximation, we derive analytical solutions and describe how they can be used to extract the decoherence rates and to account for the measurement data. Better agreement with the experiment can be obtained by extending this model to five levels. Finally, we investigate the stationary states created in the experiment and show that their structure is close to that of dark states.
△ Less
Submitted 13 October, 2011; v1 submitted 11 March, 2011;
originally announced March 2011.
-
Autler-Townes effect in a superconducting three-level system
Authors:
Mika A. Sillanpää,
Jian Li,
Katarina Cicak,
Fabio Altomare,
Jae I. Park,
Raymond W. Simmonds,
G. S. Paraoanu,
Pertti J. Hakonen
Abstract:
When a three-level quantum system is irradiated by an intense coupling field resonant with one of the three possible transitions, the absorption peak of an additional probe field involving the remaining level is split. This process is known in quantum optics as the Autler-Townes effect. We observe these phenomena in a superconducting Josephson phase qubit, which can be considered an "artificial at…
▽ More
When a three-level quantum system is irradiated by an intense coupling field resonant with one of the three possible transitions, the absorption peak of an additional probe field involving the remaining level is split. This process is known in quantum optics as the Autler-Townes effect. We observe these phenomena in a superconducting Josephson phase qubit, which can be considered an "artificial atom" with a multilevel quantum structure. The spectroscopy peaks can be explained reasonably well by a simple three-level Hamiltonian model. Simulation of a more complete model (including dissipation, higher levels, and cross-coupling) provides excellent agreement with all the experimental data.
△ Less
Submitted 6 March, 2011; v1 submitted 16 April, 2009;
originally announced April 2009.
