Showing 1–50 of 124 results for author: Schoelkopf, R J

Bias-preserving and error-detectable entangling operations in a superconducting dual-rail system

Authors: Nitish Mehta, James D. Teoh, Taewan Noh, Ankur Agrawal, Amos Anderson, Beau Birdsall, Avadh Brahmbhatt, Winfred Byrd, Marc Cacioppo, Anthony Cabrera, Leo Carroll, Jonathan Chen, Tzu-Chiao Chien, Richard Chamberlain, Jacob C. Curtis, Doreen Danso, Sanjana Renganatha Desigan, Francesco D'Acounto, Bassel Heiba Elfeky, S. M. Farzaneh, Chase Foley, Benjamin Gudlewski, Hannah Hastings, Robert Johnson, Nishaad Khedkar , et al. (47 additional authors not shown)

Abstract: For useful quantum computation, error-corrected machines are required that can dramatically reduce the inevitable errors experienced by physical qubits. While significant progress has been made in approaching and exceeding the surface-code threshold in superconducting platforms, large gains in the logical error rate with increasing system size remain out of reach. This is due both to the large num… ▽ More For useful quantum computation, error-corrected machines are required that can dramatically reduce the inevitable errors experienced by physical qubits. While significant progress has been made in approaching and exceeding the surface-code threshold in superconducting platforms, large gains in the logical error rate with increasing system size remain out of reach. This is due both to the large number of required physical qubits and the need to operate far below threshold. Importantly, by exploiting the biases and structure of the physical errors, this threshold can be raised. Erasure qubits achieve this by detecting certain errors at the hardware level. Dual-rail qubits encoded in superconducting cavities are a promising erasure qubit wherein the dominant error, photon loss, can be detected and converted to an erasure. In these approaches, the complete set of operations, including two qubit gates, must be high performance and preserve as much of the desirable hierarchy or bias in the errors as possible. Here, we design and realize a novel two-qubit gate for dual-rail erasure qubits based on superconducting microwave cavities. The gate is high-speed ($\sim$500 ns duration), and yields a residual gate infidelity after error detection below 0.1%. Moreover, we experimentally demonstrate that this gate largely preserves the favorable error structure of idling dual-rail qubits, making it ideal for error correction. We measure low erasure rates of $\sim$0.5% per gate, as well as low and asymmetric dephasing errors that occur at least three times more frequently on control qubits compared to target qubits. Bit-flip errors are practically nonexistent, bounded at the few parts per million level. This error asymmetry has not been well explored but is extremely useful in quantum error correction and flag-qubit contexts, where it can create a faster path to effective error-corrected systems. △ Less

Submitted 6 May, 2025; v1 submitted 13 March, 2025; originally announced March 2025.

A Linear Quantum Coupler for Clean Bosonic Control

Authors: Aniket Maiti, John W. O. Garmon, Yao Lu, Alessandro Miano, Luigi Frunzio, Robert J. Schoelkopf

Abstract: Quantum computing with superconducting circuits relies on high-fidelity driven nonlinear processes. An ideal quantum nonlinearity would selectively activate desired coherent processes at high strength, without activating parasitic mixing products or introducing additional decoherence. The wide bandwidth of the Josephson nonlinearity makes this difficult, with undesired drive-induced transitions an… ▽ More Quantum computing with superconducting circuits relies on high-fidelity driven nonlinear processes. An ideal quantum nonlinearity would selectively activate desired coherent processes at high strength, without activating parasitic mixing products or introducing additional decoherence. The wide bandwidth of the Josephson nonlinearity makes this difficult, with undesired drive-induced transitions and decoherence limiting qubit readout, gates, couplers and amplifiers. Significant strides have been recently made into building better `quantum mixers', with promise being shown by Kerr-free three-wave mixers that suppress driven frequency shifts, and balanced quantum mixers that explicitly forbid a significant fraction of parasitic processes. We propose a novel mixer that combines both these strengths, with engineered selection rules that make it essentially linear (not just Kerr-free) when idle, and activate clean parametric processes even when driven at high strength. Further, its ideal Hamiltonian is simple to analyze analytically, and we show that this ideal behavior is first-order insensitive to dominant experimental imperfections. We expect this mixer to allow significant advances in high-Q control, readout, and amplification. △ Less

Submitted 7 February, 2025; v1 submitted 29 January, 2025; originally announced January 2025.

Comments: 23 pages (8 Main + 15 Appdx), 9 figures (3 Main + 6 Appdx)

Low loss lumped-element inductors made from granular aluminum

Authors: Vishakha Gupta, Patrick Winkel, Neel Thakur, Peter van Vlaanderen, Yanhao Wang, Suhas Ganjam, Luigi Frunzio, Robert J. Schoelkopf

Abstract: Lumped-element inductors are an integral component in the circuit QED toolbox. However, it is challenging to build inductors that are simultaneously compact, linear and low-loss with standard approaches that either rely on the geometric inductance of superconducting thin films or on the kinetic inductance of Josephson junctions arrays. In this work, we overcome this challenge by utilizing the high… ▽ More Lumped-element inductors are an integral component in the circuit QED toolbox. However, it is challenging to build inductors that are simultaneously compact, linear and low-loss with standard approaches that either rely on the geometric inductance of superconducting thin films or on the kinetic inductance of Josephson junctions arrays. In this work, we overcome this challenge by utilizing the high kinetic inductance offered by superconducting granular aluminum (grAl). We demonstrate lumped-element inductors with a few nH of inductance that are up to $100$ times more compact than inductors built from pure aluminum (Al). To characterize the properties of these linear inductors, we first report on the performance of lumped-element resonators built entirely out of grAl with sheet inductances varying from $30-320\,$pH/sq and self-Kerr non-linearities of $0.2-20\,\mathrm{Hz/photon}$. Further, we demonstrate ex-situ integration of these grAl inductors into hybrid resonators with Al or tantalum (Ta) capacitor electrodes without increasing total internal losses. Interestingly, the measured internal quality factors systematically decrease with increasing room-temperature resistivity of the grAl film for all devices, indicating a trade-off between compactness and internal loss. For our lowest resistivity grAl films, we measure quality factors reaching $3.5 \times 10^6$ for the all-grAl devices and $4.5 \times 10^6$ for the hybrid grAl/Ta devices, similar to state-of-the-art quantum circuits. Our loss analysis suggests that the surface loss factor of grAl is similar to that of pure Al for our lowest resistivity films, while the increasing losses with resistivity could be explained by increasing conductor loss in the grAl film. △ Less

Submitted 19 November, 2024; originally announced November 2024.

Comments: 10 pages, 7 figures (main text); 11 pages, 7 figures (supplementary)

Quantum Control of an Oscillator with a Kerr-cat Qubit

Authors: Andy Z. Ding, Benjamin L. Brock, Alec Eickbusch, Akshay Koottandavida, Nicholas E. Frattini, Rodrigo G. Cortinas, Vidul R. Joshi, Stijn J. de Graaf, Benjamin J. Chapman, Suhas Ganjam, Luigi Frunzio, Robert J. Schoelkopf, Michel H. Devoret

Abstract: Bosonic codes offer a hardware-efficient strategy for quantum error correction by redundantly encoding quantum information in the large Hilbert space of a harmonic oscillator. However, experimental realizations of these codes are often limited by ancilla errors propagating to the encoded logical qubit during syndrome measurements. The Kerr-cat qubit has been proposed as an ancilla for these codes… ▽ More Bosonic codes offer a hardware-efficient strategy for quantum error correction by redundantly encoding quantum information in the large Hilbert space of a harmonic oscillator. However, experimental realizations of these codes are often limited by ancilla errors propagating to the encoded logical qubit during syndrome measurements. The Kerr-cat qubit has been proposed as an ancilla for these codes due to its theoretically-exponential noise bias, which would enable fault-tolerant error syndrome measurements, but the coupling required to perform these syndrome measurements has not yet been demonstrated. In this work, we experimentally realize driven parametric coupling of a Kerr-cat qubit to a high-quality-factor microwave cavity and demonstrate a gate set enabling universal quantum control of the cavity. We measure the decoherence of the cavity in the presence of the Kerr-cat and discover excess dephasing due to heating of the Kerr-cat to excited states. By engineering frequency-selective dissipation to counteract this heating, we are able to eliminate this dephasing, thereby demonstrating a high on-off ratio of control. Our results pave the way toward using the Kerr-cat to fault-tolerantly measure error syndromes of bosonic codes. △ Less

Submitted 15 July, 2024; originally announced July 2024.

A mid-circuit erasure check on a dual-rail cavity qubit using the joint-photon number-splitting regime of circuit QED

Authors: Stijn J. de Graaf, Sophia H. Xue, Benjamin J. Chapman, James D. Teoh, Takahiro Tsunoda, Patrick Winkel, John W. O. Garmon, Kathleen M. Chang, Luigi Frunzio, Shruti Puri, Robert J. Schoelkopf

Abstract: Quantum control of a linear oscillator using a static dispersive coupling to a nonlinear ancilla underpins a wide variety of experiments in circuit QED. Extending this control to more than one oscillator while minimizing the required connectivity to the ancilla would enable hardware-efficient multi-mode entanglement and measurements. We show that the spectrum of an ancilla statically coupled to a… ▽ More Quantum control of a linear oscillator using a static dispersive coupling to a nonlinear ancilla underpins a wide variety of experiments in circuit QED. Extending this control to more than one oscillator while minimizing the required connectivity to the ancilla would enable hardware-efficient multi-mode entanglement and measurements. We show that the spectrum of an ancilla statically coupled to a single mode can be made to depend on the joint photon number in two modes by applying a strong parametric beamsplitter coupling between them. This `joint-photon number-splitting' regime extends single-oscillator techniques to two-oscillator control, which we use to realize a hardware-efficient erasure check for a dual-rail qubit encoded in two superconducting cavities. By leveraging the beamsplitter coupling already required for single-qubit gates, this scheme permits minimal connectivity between circuit elements. Furthermore, the flexibility to choose the pulse shape allows us to limit the susceptibility to different error channels. We use this scheme to detect leakage errors with a missed erasure fraction of $(9.0 \pm 0.5)\times10^{-4}$, while incurring an erasure rate of $2.92 \pm 0.01\%$ and a Pauli error rate of $0.31 \pm 0.01\%$, both of which are dominated by cavity errors. △ Less

Submitted 13 August, 2024; v1 submitted 20 June, 2024; originally announced June 2024.

Comments: Updated references

Superconducting Quantum Memory with a Suspended Coaxial Resonator

Authors: Lev Krayzman, Chan U Lei, Suhas Ganjam, James Teoh, Luigi Frunzio, Robert J. Schoelkopf

Abstract: A promising way to store quantum information is by encoding it in the bosonic excitations of microwave resonators. This provides for long coherence times, low dephasing rates, as well as a hardware-efficient approach to quantum error correction. There are two main methods used to make superconducting microwave resonators: traditionally machined out of bulk material, and lithographically fabricated… ▽ More A promising way to store quantum information is by encoding it in the bosonic excitations of microwave resonators. This provides for long coherence times, low dephasing rates, as well as a hardware-efficient approach to quantum error correction. There are two main methods used to make superconducting microwave resonators: traditionally machined out of bulk material, and lithographically fabricated on-chip in thin film. 3D resonators have few loss channels and larger mode volumes, and therefore smaller participations in the lossy parts, but it can be challenging to reach high material qualities. On-chip resonators can use low-loss thin films, but confine the field more tightly, resulting in higher participations and additional loss channels from the dielectric substrate. In this work, we present a design in which a dielectric scaffold supports a thin-film conductor within a 3D package, thus combining the low surface participations of bulk-machined cavities with the high quality and control over materials of thin-film circuits. By incorporating a separate chip containing a transmon qubit, we realize a quantum memory and measure single-photon lifetimes in excess of a millisecond. This hybrid 3D architecture has several advantages for scaling, as it relaxes the importance of the package and permits modular construction with separately-replaceable qubit and resonator devices. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Comments: 11 pages, 8 figures

Erasure detection of a dual-rail qubit encoded in a double-post superconducting cavity

Authors: Akshay Koottandavida, Ioannis Tsioutsios, Aikaterini Kargioti, Cassady R. Smith, Vidul R. Joshi, Wei Dai, James D. Teoh, Jacob C. Curtis, Luigi Frunzio, Robert J. Schoelkopf, Michel H. Devoret

Abstract: Qubits with predominantly erasure errors present distinctive advantages for quantum error correction(QEC) and fault tolerant quantum computing. Logical qubits based on dual-rail encoding that exploit erasure detection have been recently proposed in superconducting circuit architectures, either with coupled transmons or cavities. Here, we implement a dual-rail qubit encoded in a compact, double-pos… ▽ More Qubits with predominantly erasure errors present distinctive advantages for quantum error correction(QEC) and fault tolerant quantum computing. Logical qubits based on dual-rail encoding that exploit erasure detection have been recently proposed in superconducting circuit architectures, either with coupled transmons or cavities. Here, we implement a dual-rail qubit encoded in a compact, double-post superconducting cavity. Using an auxiliary transmon, we perform erasure detection on the dual-rail subspace. We characterize the behaviour of the codespace by a novel method to perform joint-Wigner tomography. This is based on modifying the cross-Kerr interaction between the cavity modes and the transmon. We measure an erasure rate of 3.981 +/- 0.003 (ms)-1 and a residual dephasing error rate up to 0.17 (ms)-1 within the codespace. This strong hierarchy of error rates, together with the compact and hardware-efficient nature of this novel architecture, hold promise in realising QEC schemes with enhanced thresholds and improved scaling. △ Less

Submitted 17 November, 2023; v1 submitted 7 November, 2023; originally announced November 2023.

Fast quantum control of cavities using an improved protocol without coherent errors

Authors: Jonas Landgraf, Christa Flühmann, Thomas Fösel, Florian Marquardt, Robert J. Schoelkopf

Abstract: The selective number-dependent arbitrary phase (SNAP) gates form a powerful class of quantum gates, imparting arbitrarily chosen phases to the Fock states of a cavity. However, for short pulses, coherent errors limit the performance. Here we demonstrate in theory and experiment that such errors can be completely suppressed, provided that the pulse times exceed a specific limit. The resulting short… ▽ More The selective number-dependent arbitrary phase (SNAP) gates form a powerful class of quantum gates, imparting arbitrarily chosen phases to the Fock states of a cavity. However, for short pulses, coherent errors limit the performance. Here we demonstrate in theory and experiment that such errors can be completely suppressed, provided that the pulse times exceed a specific limit. The resulting shorter gate times also reduce incoherent errors. Our approach needs only a small number of frequency components, the resulting pulses can be interpreted easily, and it is compatible with fault-tolerant schemes. △ Less

Submitted 28 November, 2024; v1 submitted 16 October, 2023; originally announced October 2023.

Comments: 22 pages, 3 figures in the main text, 1 figure in the Appendix

Surpassing millisecond coherence times in on-chip superconducting quantum memories by optimizing materials, processes, and circuit design

Authors: Suhas Ganjam, Yanhao Wang, Yao Lu, Archan Banerjee, Chan U Lei, Lev Krayzman, Kim Kisslinger, Chenyu Zhou, Ruoshui Li, Yichen Jia, Mingzhao Liu, Luigi Frunzio, Robert J. Schoelkopf

Abstract: The performance of superconducting quantum circuits for quantum computing has advanced tremendously in recent decades; however, a comprehensive understanding of relaxation mechanisms does not yet exist. In this work, we utilize a multimode approach to characterizing energy losses in superconducting quantum circuits, with the goals of predicting device performance and improving coherence through ma… ▽ More The performance of superconducting quantum circuits for quantum computing has advanced tremendously in recent decades; however, a comprehensive understanding of relaxation mechanisms does not yet exist. In this work, we utilize a multimode approach to characterizing energy losses in superconducting quantum circuits, with the goals of predicting device performance and improving coherence through materials, process, and circuit design optimization. Using this approach, we measure significant reductions in surface and bulk dielectric losses by employing a tantalum-based materials platform and annealed sapphire substrates. With this knowledge we predict and experimentally verify the relaxation times of aluminum- and tantalum-based transmon qubits. We additionally optimize device geometry to maximize coherence within a coaxial tunnel architecture, and realize on-chip quantum memories with single-photon Ramsey times of 2.0$-$2.7 ms, limited by their energy relaxation times of 1.0$-$1.4 ms. To our knowledge this is the highest coherence achieved in an on-chip quantum memory, and demonstrates an advancement towards a more modular and compact coaxial circuit architecture for bosonic qubits with reproducibly high coherence. △ Less

Submitted 14 September, 2023; v1 submitted 29 August, 2023; originally announced August 2023.

Comments: Updated submission 23/09/14: corrected grant number under Acknowledgements

Demonstrating a superconducting dual-rail cavity qubit with erasure-detected logical measurements

Authors: Kevin S. Chou, Tali Shemma, Heather McCarrick, Tzu-Chiao Chien, James D. Teoh, Patrick Winkel, Amos Anderson, Jonathan Chen, Jacob Curtis, Stijn J. de Graaf, John W. O. Garmon, Benjamin Gudlewski, William D. Kalfus, Trevor Keen, Nishaad Khedkar, Chan U Lei, Gangqiang Liu, Pinlei Lu, Yao Lu, Aniket Maiti, Luke Mastalli-Kelly, Nitish Mehta, Shantanu O. Mundhada, Anirudh Narla, Taewan Noh , et al. (9 additional authors not shown)

Abstract: A critical challenge in developing scalable error-corrected quantum systems is the accumulation of errors while performing operations and measurements. One promising approach is to design a system where errors can be detected and converted into erasures. Such a system utilizing erasure qubits are known to have relaxed requirements for quantum error correction. A recent proposal aims to do this usi… ▽ More A critical challenge in developing scalable error-corrected quantum systems is the accumulation of errors while performing operations and measurements. One promising approach is to design a system where errors can be detected and converted into erasures. Such a system utilizing erasure qubits are known to have relaxed requirements for quantum error correction. A recent proposal aims to do this using a dual-rail encoding with superconducting cavities. However, experimental characterization and demonstration of a dual-rail cavity qubit has not yet been realized. In this work, we implement such a dual-rail cavity qubit; we demonstrate a projective logical measurement with integrated erasure detection and use it to measure dual-rail qubit idling errors. We measure logical state preparation and measurement errors at the $0.01\%$-level and detect over $99\%$ of cavity decay events as erasures. We use the precision of this new measurement protocol to distinguish different types of errors in this system, finding that while decay errors occur with probability $\sim 0.2\%$ per microsecond, phase errors occur 6 times less frequently and bit flips occur at least 140 times less frequently. These findings represent the first confirmation of the expected error hierarchy necessary to concatenate dual-rail erasure qubits into a highly efficient erasure code. △ Less

Submitted 13 October, 2023; v1 submitted 6 July, 2023; originally announced July 2023.

Microwave loss characterization using multi-mode superconducting resonators

Authors: Chan U Lei, Suhas Ganjam, Lev Krayzman, Archan Banerjee, Kim Kisslinger, Sooyeon Hwang, Luigi Frunzio, Robert J. Schoelkopf

Abstract: Measuring the losses arising from different materials and interfaces is crucial to improving the coherence of superconducting quantum circuits. Although this has been of interest for a long time, current studies can either only provide bounds to those losses, or require several devices for a complete characterization. In this work, we introduce a method to measure the microwave losses of materials… ▽ More Measuring the losses arising from different materials and interfaces is crucial to improving the coherence of superconducting quantum circuits. Although this has been of interest for a long time, current studies can either only provide bounds to those losses, or require several devices for a complete characterization. In this work, we introduce a method to measure the microwave losses of materials and interfaces with a single multi-mode superconducting resonator. We demonstrate a formalism for analyzing the loss sensitivity of multi-mode systems and discuss the design strategies of multi-mode resonators for material loss studies. We present two types of multi-mode superconducting resonators for the study of bulk superconductors: the forky whispering-gallery-mode resonator (FWGMR) and the ellipsoidal cavity. We use these resonators to measure the surface dielectric, conductor, and seam losses of high-purity (5N5) aluminum and aluminum alloy (6061), as well as how they are affected by chemical etching, diamond turning, and thin-film coating. We find that chemical etching and diamond turning reduce both the surface dielectric and conductive losses of high-purity aluminum, but provide no appreciable improvement to the seam. Coating the surfaces of diamond-turned aluminum alloys with e-beam evaporated or sputtered aluminum thin-films significantly reduces all three losses under study. In addition, we study the effect of chemical etching on the surface of high-purity aluminum using transmission electron microscopy (TEM) and find that the chemical etching process creates a thinner and more uniform oxide layer, consistent with the observed improvement in the surface dielectric loss. △ Less

Submitted 2 May, 2023; originally announced May 2023.

High-fidelity parametric beamsplitting with a parity-protected converter

Authors: Yao Lu, Aniket Maiti, John W. O. Garmon, Suhas Ganjam, Yaxing Zhang, Jahan Claes, Luigi Frunzio, S. M. Girvin, Robert J. Schoelkopf

Abstract: Fast, high-fidelity operations between microwave resonators are an important tool for bosonic quantum computation and simulation with superconducting circuits. An attractive approach for implementing these operations is to couple these resonators via a nonlinear converter and actuate parametric processes with RF drives. It can be challenging to make these processes simultaneously fast and high fid… ▽ More Fast, high-fidelity operations between microwave resonators are an important tool for bosonic quantum computation and simulation with superconducting circuits. An attractive approach for implementing these operations is to couple these resonators via a nonlinear converter and actuate parametric processes with RF drives. It can be challenging to make these processes simultaneously fast and high fidelity, since this requires introducing strong drives without activating parasitic processes or introducing additional decoherence channels. We show that in addition to a careful management of drive frequencies and the spectrum of environmental noise, leveraging the inbuilt symmetries of the converter Hamiltonian can suppress unwanted nonlinear interactions, preventing converter-induced decoherence. We demonstrate these principles using a differentially-driven DC-SQUID as our converter, coupled to two high-Q microwave cavities. Using this architecture, we engineer a highly-coherent beamsplitter and fast ($\sim$ 100 ns) swaps between the cavities, limited primarily by their intrinsic single-photon loss. We characterize this beamsplitter in the cavities' joint single-photon subspace, and show that we can detect and post-select photon loss events to achieve a beamsplitter gate fidelity exceeding 99.98$\%$, which to our knowledge far surpasses the current state of the art. △ Less

Submitted 28 September, 2023; v1 submitted 1 March, 2023; originally announced March 2023.

Comments: Yao Lu and Aniket Maiti contributed equally to this work. Total 37 pages (Main 8 pages, Methods 6 pages, Supplement 18 pages). Total 16 figures (Main 3 figures, Methods 4 figures, Supplement 9 figures)

Journal ref: Nature Communications 14, 5767 (2023)

Dual-rail encoding with superconducting cavities

Authors: James D. Teoh, Patrick Winkel, Harshvardhan K. Babla, Benjamin J. Chapman, Jahan Claes, Stijn J. de Graaf, John W. O. Garmon, William D. Kalfus, Yao Lu, Aniket Maiti, Kaavya Sahay, Neel Thakur, Takahiro Tsunoda, Sophia H. Xue, Luigi Frunzio, Steven M. Girvin, Shruti Puri, Robert J. Schoelkopf

Abstract: The design of quantum hardware that reduces and mitigates errors is essential for practical quantum error correction (QEC) and useful quantum computation. To this end, we introduce the circuit-Quantum Electrodynamics (QED) dual-rail qubit in which our physical qubit is encoded in the single-photon subspace of two superconducting microwave cavities. The dominant photon loss errors can be detected a… ▽ More The design of quantum hardware that reduces and mitigates errors is essential for practical quantum error correction (QEC) and useful quantum computation. To this end, we introduce the circuit-Quantum Electrodynamics (QED) dual-rail qubit in which our physical qubit is encoded in the single-photon subspace of two superconducting microwave cavities. The dominant photon loss errors can be detected and converted into erasure errors, which are in general much easier to correct. In contrast to linear optics, a circuit-QED implementation of the dual-rail code offers unique capabilities. Using just one additional transmon ancilla per dual-rail qubit, we describe how to perform a gate-based set of universal operations that includes state preparation, logical readout, and parametrizable single and two-qubit gates. Moreover, first-order hardware errors in the cavities and the transmon can be detected and converted to erasure errors in all operations, leaving background Pauli errors that are orders of magnitude smaller. Hence, the dual-rail cavity qubit exhibits a favorable hierarchy of error rates and is expected to perform well below the relevant QEC thresholds with today's coherence times. △ Less

Submitted 16 October, 2023; v1 submitted 22 December, 2022; originally announced December 2022.

A high on-off ratio beamsplitter interaction for gates on bosonically encoded qubits

Authors: Benjamin J. Chapman, Stijn J. de Graaf, Sophia H. Xue, Yaxing Zhang, James Teoh, Jacob C. Curtis, Takahiro Tsunoda, Alec Eickbusch, Alexander P. Read, Akshay Koottandavida, Shantanu O. Mundhada, Luigi Frunzio, M. H. Devoret, S. M. Girvin, R. J. Schoelkopf

Abstract: Encoding a qubit in a high quality superconducting microwave cavity offers the opportunity to perform the first layer of error correction in a single device, but presents a challenge: how can quantum oscillators be controlled while introducing a minimal number of additional error channels? We focus on the two-qubit portion of this control problem by using a 3-wave mixing coupling element to engine… ▽ More Encoding a qubit in a high quality superconducting microwave cavity offers the opportunity to perform the first layer of error correction in a single device, but presents a challenge: how can quantum oscillators be controlled while introducing a minimal number of additional error channels? We focus on the two-qubit portion of this control problem by using a 3-wave mixing coupling element to engineer a programmable beamsplitter interaction between two bosonic modes separated by more than an octave in frequency, without introducing major additional sources of decoherence. Combining this with single-oscillator control provided by a dispersively coupled transmon provides a framework for quantum control of multiple encoded qubits. The beamsplitter interaction $g_\text{bs}$ is fast relative to the timescale of oscillator decoherence, enabling over $10^3$ beamsplitter operations per coherence time, and approaching the typical rate of the dispersive coupling $χ$ used for individual oscillator control. Further, the programmable coupling is engineered without adding unwanted interactions between the oscillators, as evidenced by the high on-off ratio of the operations, which can exceed $10^5$. We then introduce a new protocol to realize a hybrid controlled-SWAP operation in the regime $g_{bs}\approxχ$, in which a transmon provides the control bit for the SWAP of two bosonic modes. Finally, we use this gate in a SWAP test to project a pair of bosonic qubits into a Bell state with measurement-corrected fidelity of $95.5\% \pm 0.2\%$. △ Less

Submitted 2 July, 2023; v1 submitted 22 December, 2022; originally announced December 2022.

Comments: 8 pages main text, 29 pages with appendices. 16 figures. Published version is open access and available here: https://journals.aps.org/prxquantum/abstract/10.1103/PRXQuantum.4.020355

Journal ref: PRX Quantum 4, 020355. Published 28 June 2023

Error-detectable bosonic entangling gates with a noisy ancilla

Authors: Takahiro Tsunoda, James D. Teoh, William D. Kalfus, Stijn J. de Graaf, Benjamin J. Chapman, Jacob C. Curtis, Neel Thakur, Steven M. Girvin, Robert J. Schoelkopf

Abstract: Bosonic quantum error correction has proven to be a successful approach for extending the coherence of quantum memories, but to execute deep quantum circuits, high-fidelity gates between encoded qubits are needed. To that end, we present a family of error-detectable two-qubit gates for a variety of bosonic encodings. From a new geometric framework based on a "Bloch sphere" of bosonic operators, we… ▽ More Bosonic quantum error correction has proven to be a successful approach for extending the coherence of quantum memories, but to execute deep quantum circuits, high-fidelity gates between encoded qubits are needed. To that end, we present a family of error-detectable two-qubit gates for a variety of bosonic encodings. From a new geometric framework based on a "Bloch sphere" of bosonic operators, we construct $ZZ_L(θ)$ and $\text{eSWAP}(θ)$ gates for the binomial, 4-legged cat, dual-rail and several other bosonic codes. The gate Hamiltonian is simple to engineer, requiring only a programmable beamsplitter between two bosonic qubits and an ancilla dispersively coupled to one qubit. This Hamiltonian can be realized in circuit QED hardware with ancilla transmons and microwave cavities. The proposed theoretical framework was developed for circuit QED but is generalizable to any platform that can effectively generate this Hamiltonian. Crucially, one can also detect first-order errors in the ancilla and the bosonic qubits during the gates. We show that this allows one to reach error-detected gate fidelities at the $10^{-4}$ level with today's hardware, limited only by second-order hardware errors. △ Less

Submitted 21 December, 2022; originally announced December 2022.

Comments: 21 pages, 8 figures

Architectures for Multinode Superconducting Quantum Computers

Authors: James Ang, Gabriella Carini, Yanzhu Chen, Isaac Chuang, Michael Austin DeMarco, Sophia E. Economou, Alec Eickbusch, Andrei Faraon, Kai-Mei Fu, Steven M. Girvin, Michael Hatridge, Andrew Houck, Paul Hilaire, Kevin Krsulich, Ang Li, Chenxu Liu, Yuan Liu, Margaret Martonosi, David C. McKay, James Misewich, Mark Ritter, Robert J. Schoelkopf, Samuel A. Stein, Sara Sussman, Hong X. Tang , et al. (8 additional authors not shown)

Abstract: Many proposals to scale quantum technology rely on modular or distributed designs where individual quantum processors, called nodes, are linked together to form one large multinode quantum computer (MNQC). One scalable method to construct an MNQC is using superconducting quantum systems with optical interconnects. However, a limiting factor of these machines will be internode gates, which may be t… ▽ More Many proposals to scale quantum technology rely on modular or distributed designs where individual quantum processors, called nodes, are linked together to form one large multinode quantum computer (MNQC). One scalable method to construct an MNQC is using superconducting quantum systems with optical interconnects. However, a limiting factor of these machines will be internode gates, which may be two to three orders of magnitude noisier and slower than local operations. Surmounting the limitations of internode gates will require a range of techniques, including improvements in entanglement generation, the use of entanglement distillation, and optimized software and compilers, and it remains unclear how improvements to these components interact to affect overall system performance, what performance from each is required, or even how to quantify the performance of each. In this paper, we employ a `co-design' inspired approach to quantify overall MNQC performance in terms of hardware models of internode links, entanglement distillation, and local architecture. In the case of superconducting MNQCs with microwave-to-optical links, we uncover a tradeoff between entanglement generation and distillation that threatens to degrade performance. We show how to navigate this tradeoff, lay out how compilers should optimize between local and internode gates, and discuss when noisy quantum links have an advantage over purely classical links. Using these results, we introduce a roadmap for the realization of early MNQCs which illustrates potential improvements to the hardware and software of MNQCs and outlines criteria for evaluating the landscape, from progress in entanglement generation and quantum memory to dedicated algorithms such as distributed quantum phase estimation. While we focus on superconducting devices with optical interconnects, our approach is general across MNQC implementations. △ Less

Submitted 12 December, 2022; originally announced December 2022.

Comments: 23 pages, white paper

Real-time quantum error correction beyond break-even

Authors: V. V. Sivak, A. Eickbusch, B. Royer, S. Singh, I. Tsioutsios, S. Ganjam, A. Miano, B. L. Brock, A. Z. Ding, L. Frunzio, S. M. Girvin, R. J. Schoelkopf, M. H. Devoret

Abstract: The ambition of harnessing the quantum for computation is at odds with the fundamental phenomenon of decoherence. The purpose of quantum error correction (QEC) is to counteract the natural tendency of a complex system to decohere. This cooperative process, which requires participation of multiple quantum and classical components, creates a special type of dissipation that removes the entropy cause… ▽ More The ambition of harnessing the quantum for computation is at odds with the fundamental phenomenon of decoherence. The purpose of quantum error correction (QEC) is to counteract the natural tendency of a complex system to decohere. This cooperative process, which requires participation of multiple quantum and classical components, creates a special type of dissipation that removes the entropy caused by the errors faster than the rate at which these errors corrupt the stored quantum information. Previous experimental attempts to engineer such a process faced an excessive generation of errors that overwhelmed the error-correcting capability of the process itself. Whether it is practically possible to utilize QEC for extending quantum coherence thus remains an open question. We answer it by demonstrating a fully stabilized and error-corrected logical qubit whose quantum coherence is significantly longer than that of all the imperfect quantum components involved in the QEC process, beating the best of them with a coherence gain of $G = 2.27 \pm 0.07$. We achieve this performance by combining innovations in several domains including the fabrication of superconducting quantum circuits and model-free reinforcement learning. △ Less

Submitted 16 November, 2022; originally announced November 2022.

Acoustic radiation from a superconducting qubit: From spontaneous emission to Rabi oscillations

Authors: Vijay Jain, Vladislav D. Kurilovich, Yanni D. Dahmani, Chan U Lei, David Mason, Taekwan Yoon, Peter T. Rakich, Leonid I. Glazman, Robert J. Schoelkopf

Abstract: Acoustic spontaneous emission into bulk dielectrics can be a strong source of decoherence in quantum devices, especially when a qubit is in the presence of piezoelectric materials. We study the dynamics of a qubit coupled to an acoustic resonator by a piezoelectric film. By varying the surface topography of the resonator from rough to polished to shaped, we explore the crossover from fast decay of… ▽ More Acoustic spontaneous emission into bulk dielectrics can be a strong source of decoherence in quantum devices, especially when a qubit is in the presence of piezoelectric materials. We study the dynamics of a qubit coupled to an acoustic resonator by a piezoelectric film. By varying the surface topography of the resonator from rough to polished to shaped, we explore the crossover from fast decay of an excited qubit to quantum-coherent coupling between the qubit and an isolated phonon mode. Our experimental approach may be used for precision measurements of crystalline vibrations, the design of quantum memories, and the study of electro-mechanical contributions to dielectric loss. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Comments: 7 pages, 4 figures; 19 pages supplementary, 5 supplementary figures

The squeezed Kerr oscillator: spectral kissing and phase-flip robustness

Authors: Nicholas E. Frattini, Rodrigo G. Cortiñas, Jayameenakshi Venkatraman, Xu Xiao, Qile Su, Chan U Lei, Benjamin J. Chapman, Vidul R. Joshi, S. M. Girvin, Robert J. Schoelkopf, Shruti Puri, Michel H. Devoret

Abstract: By applying a microwave drive to a specially designed Josephson circuit, we have realized an elementary quantum optics model, the squeezed Kerr oscillator. This model displays, as the squeezing amplitude is increased, a cross-over from a single ground state regime to a doubly-degenerate ground state regime. In the latter case, the ground state manifold is spanned by Schrödinger-cat states, i.e. qu… ▽ More By applying a microwave drive to a specially designed Josephson circuit, we have realized an elementary quantum optics model, the squeezed Kerr oscillator. This model displays, as the squeezing amplitude is increased, a cross-over from a single ground state regime to a doubly-degenerate ground state regime. In the latter case, the ground state manifold is spanned by Schrödinger-cat states, i.e. quantum superpositions of coherent states with opposite phases. For the first time, having resolved up to the tenth excited state in a spectroscopic experiment, we confirm that the proposed emergent static effective Hamiltonian correctly describes the system, despite its driven character. We also find that the lifetime of the coherent state components of the cat states increases in steps as a function of the squeezing amplitude. We interpret the staircase pattern as resulting from pairwise level kissing in the excited state spectrum. Considering the Kerr-cat qubit encoded in this ground state manifold, we achieve for the first time quantum nondemolition readout fidelities greater than 99%, and enhancement of the phase-flip lifetime by more than two orders of magnitude, while retaining universal quantum control. Our experiment illustrates the crucial role of parametric drive Hamiltonian engineering for hardware-efficient quantum computation. △ Less

Submitted 8 September, 2022; originally announced September 2022.

Simultaneous Brillouin and piezoelectric coupling to a high-frequency bulk acoustic resonator

Authors: Taekwan Yoon, David Mason, Vijay Jain, Yiwen Chu, Prashanta Kharel, William H. Renninger, Liam Collins, Luigi Frunzio, Robert J Schoelkopf, Peter T Rakich

Abstract: Bulk acoustic resonators support robust, long-lived mechanical modes, capable of coupling to various quantum systems. In separate works, such devices have achieved strong coupling to both superconducting qubits, via piezoelectricity, and optical cavities, via Brillouin interactions. In this work, we present a novel hybrid microwave/optical platform capable of coupling to bulk acoustic waves throug… ▽ More Bulk acoustic resonators support robust, long-lived mechanical modes, capable of coupling to various quantum systems. In separate works, such devices have achieved strong coupling to both superconducting qubits, via piezoelectricity, and optical cavities, via Brillouin interactions. In this work, we present a novel hybrid microwave/optical platform capable of coupling to bulk acoustic waves through cavity-enhanced piezoelectric and photoelastic interactions. The modular, tunable system achieves fully resonant and well-mode-matched interactions between a 3D microwave cavity, a high-frequency bulk acoustic resonator, and a Fabry Perot cavity. We realize this piezo-Brillouin interaction in x-cut quartz, demonstrating the potential for strong optomechanical interactions and high cooperativity using optical cavity enhancement. We further show how this device functions as a bidirectional electro-opto-mechanical transducer, with quantum efficiency exceeding $10^{-8}$, and a feasible path towards unity conversion efficiency. The high optical sensitivity and ability to apply large resonant microwave field in this system also offers a new tool for probing anomalous electromechanical couplings, which we demonstrate by investigating (nominally-centrosymmetric) CaF$_2$ and revealing a parasitic piezoelectricity of 83 am/V. Such studies are an important topic for emerging quantum technologies, and highlight the versatility of this new hybrid platform. △ Less

Submitted 30 January, 2023; v1 submitted 12 August, 2022; originally announced August 2022.

Precision measurement of the microwave dielectric loss of sapphire in the quantum regime with parts-per-billion sensitivity

Authors: Alexander P. Read, Benjamin J. Chapman, Chan U Lei, Jacob C. Curtis, Suhas Ganjam, Lev Krayzman, Luigi Frunzio, Robert J. Schoelkopf

Abstract: Dielectric loss is known to limit state-of-the-art superconducting qubit lifetimes. Recent experiments imply upper bounds on bulk dielectric loss tangents on the order of $100$ parts-per-billion, but because these inferences are drawn from fully fabricated devices with many loss channels, they do not definitively implicate or exonerate the dielectric. To resolve this ambiguity, we have devised a m… ▽ More Dielectric loss is known to limit state-of-the-art superconducting qubit lifetimes. Recent experiments imply upper bounds on bulk dielectric loss tangents on the order of $100$ parts-per-billion, but because these inferences are drawn from fully fabricated devices with many loss channels, they do not definitively implicate or exonerate the dielectric. To resolve this ambiguity, we have devised a measurement method capable of separating and resolving bulk dielectric loss with a sensitivity at the level of $5$ parts per billion. The method, which we call the dielectric dipper, involves the in-situ insertion of a dielectric sample into a high-quality microwave cavity mode. Smoothly varying the sample's participation in the cavity mode enables a differential measurement of the sample's dielectric loss tangent. The dielectric dipper can probe the low-power behavior of dielectrics at cryogenic temperatures, and does so without the need for any lithographic process, enabling controlled comparisons of substrate materials and processing techniques. We demonstrate the method with measurements of EFG sapphire, from which we infer a bulk loss tangent of $62(7) \times 10^{-9}$ and a substrate-air interface loss tangent of $12(2) \times 10^{-4}$. For a typical transmon, this bulk loss tangent would limit device quality factors to less than $20$ million, suggesting that bulk loss is likely the dominant loss mechanism in the longest-lived transmons on sapphire. We also demonstrate this method on HEMEX sapphire and bound its bulk loss tangent to be less than $15(5) \times 10^{-9}$. As this bound is about 3 times smaller than the bulk loss tangent of EFG sapphire, use of HEMEX sapphire as a substrate would lift the bulk dielectric coherence limit of a typical transmon qubit to several milliseconds. △ Less

Submitted 30 April, 2023; v1 submitted 28 June, 2022; originally announced June 2022.

Comments: 8 pages, 5 figures, and 13 page appendix. Submitted revision synchronizes content with associated journal article, including the addition of figure 7 (methods of cavity measurement) and Appendix H (bounding magnetic bulk loss)

Journal ref: Phys. Rev. Applied 19, 034064 (2023)

Observation of wave-packet branching through an engineered conical intersection

Authors: Christopher S. Wang, Nicholas E. Frattini, Benjamin J. Chapman, Shruti Puri, Steven M. Girvin, Michel H. Devoret, Robert J. Schoelkopf

Abstract: In chemical reactions, the interplay between coherent evolution and dissipation is central to determining key properties such as the rate and yield. Of particular interest are cases where two potential energy surfaces cross at features known as conical intersections (CIs), resulting in nonadiabatic dynamics that may promote ultrafast and highly efficient reactions when rovibrational damping is pre… ▽ More In chemical reactions, the interplay between coherent evolution and dissipation is central to determining key properties such as the rate and yield. Of particular interest are cases where two potential energy surfaces cross at features known as conical intersections (CIs), resulting in nonadiabatic dynamics that may promote ultrafast and highly efficient reactions when rovibrational damping is present. A prominent chemical reaction that involves a CI is the cis-trans isomerization reaction in rhodopsin, which is crucial to vision. CIs in real molecular systems are typically investigated via optical pump-probe spectroscopy, which has demanding spectral bandwidth and temporal resolution requirements, and where precise control of the environment is challenging. A complementary approach for understanding chemical reactions is to use quantum simulators that can provide access to a wider range of observables, though thus far combining strongly interacting linear (rovibrational) and nonlinear (electronic) degrees of freedom with engineered dissipation has yet to be demonstrated. Here, we create a tunable CI in a hybrid qubit-oscillator circuit QED processor and simultaneously track both a reactive wave-packet and electronic qubit in the time-domain. We identify dephasing of the electronic qubit as the mechanism that drives wave-packet branching along the reactive coordinate in our model. Furthermore, we directly observe enhanced branching when the wave-packet passes through the CI. Thus, the forces that influence a chemical reaction can be viewed as an effective measurement induced dephasing rate that depends on the position of the wave-packet relative to the CI. Our results set the groundwork for more complex simulations of chemical dynamics, offering deeper insight into the role of dissipation in determining macroscopic quantities of interest such as the quantum yield of a chemical reaction. △ Less

Submitted 4 February, 2022; originally announced February 2022.

Fast Universal Control of an Oscillator with Weak Dispersive Coupling to a Qubit

Authors: Alec Eickbusch, Volodymyr Sivak, Andy Z. Ding, Salvatore S. Elder, Shantanu R. Jha, Jayameenakshi Venkatraman, Baptiste Royer, S. M. Girvin, Robert J. Schoelkopf, Michel H. Devoret

Abstract: A controlled evolution generated by nonlinear interactions is required to perform full manipulation of a quantum system, and such control is only coherent when the rate of nonlinearity is large compared to the rate of decoherence. As a result, engineered quantum systems typically rely on a bare nonlinearity much stronger than all decoherence rates, and this hierarchy is usually assumed to be neces… ▽ More A controlled evolution generated by nonlinear interactions is required to perform full manipulation of a quantum system, and such control is only coherent when the rate of nonlinearity is large compared to the rate of decoherence. As a result, engineered quantum systems typically rely on a bare nonlinearity much stronger than all decoherence rates, and this hierarchy is usually assumed to be necessary. In this work, we challenge this assumption by demonstrating the universal control of a quantum system where the relevant rate of bare nonlinear interaction is comparable to the fastest rate of decoherence. We do this by introducing a novel noise-resilient protocol for the universal quantum control of a nearly-harmonic oscillator that takes advantage of an in-situ enhanced nonlinearity instead of harnessing a bare nonlinearity. Our experiment consists of a high quality-factor microwave cavity with weak-dispersive coupling to a much lower quality superconducting qubit. By using strong drives to temporarily excite the oscillator, we realize an amplified three-wave-mixing interaction, achieving typical operation speeds over an order of magnitude faster than expected from the bare dispersive coupling. Our demonstrations include preparation of a single-photon state with $98\pm 1(\%)$ fidelity and preparation of squeezed vacuum with a squeezing level of $11.1$ dB, the largest intracavity squeezing reported in the microwave regime. Finally, we also demonstrate fast measurement-free preparation of logical states for the binomial and Gottesman-Kitaev-Preskill (GKP) quantum error-correcting codes. △ Less

Submitted 10 February, 2022; v1 submitted 11 November, 2021; originally announced November 2021.

Comments: 31 pages, 14 figures

Journal ref: Nature Physics, 2022

Drive-induced nonlinearities of cavity modes coupled to a transmon ancilla

Authors: Yaxing Zhang, Jacob C. Curtis, Christopher S. Wang, R. J. Schoelkopf, S. M. Girvin

Abstract: High-Q microwave cavity modes coupled to transmon ancillas provide a hardware-efficient platform for quantum computing. Due to their coupling, the cavity modes inherit finite nonlinearity from the transmons. In this work, we theoretically and experimentally investigate how an off-resonant drive on the transmon ancilla modifies the nonlinearities of cavity modes in qualitatively different ways, dep… ▽ More High-Q microwave cavity modes coupled to transmon ancillas provide a hardware-efficient platform for quantum computing. Due to their coupling, the cavity modes inherit finite nonlinearity from the transmons. In this work, we theoretically and experimentally investigate how an off-resonant drive on the transmon ancilla modifies the nonlinearities of cavity modes in qualitatively different ways, depending on the interrelation among cavity-transmon detuning, drive-transmon detuning and transmon anharmonicity. For a cavity-transmon detuning that is smaller than or comparable to the drive-transmon detuning and transmon anharmonicity, the off-resonant transmon drive can induce multiphoton resonances among cavity and transmon excitations that strongly modify cavity nonlinearities as drive parameters vary. For a large cavity-transmon detuning, the drive induces cavity-photon-number-dependent ac Stark shifts of transmon levels that translate into effective cavity nonlinearities. In the regime of weak transmon-cavity coupling, the cavity Kerr nonlinearity relates to the third-order nonlinear susceptibility function $χ^{(3)}$ of the driven ancilla. This susceptibility function provides a numerically efficient way of computing the cavity Kerr particularly for systems with many cavity modes controlled by a single transmon. It also serves as a diagnostic tool for identifying undesired drive-induced multiphoton resonance processes. Lastly, we show that by judiciously choosing the drive amplitude, a single off-resonant transmon drive can be used to cancel the cavity self-Kerr nonlinearity or the inter-cavity cross-Kerr. This provides a way of dynamically correcting the cavity Kerr nonlinearity during bosonic operations or quantum error correction protocols that rely on the cavity modes being linear. △ Less

Submitted 7 March, 2022; v1 submitted 16 June, 2021; originally announced June 2021.

Comments: Improved Figs. 4 and 5 compared to the published version

Quantum control of bosonic modes with superconducting circuits

Authors: Wen-Long Ma, Shruti Puri, Robert J. Schoelkopf, Michel H. Devoret, S. M. Girvin, Liang Jiang

Abstract: Bosonic modes have wide applications in various quantum technologies, such as optical photons for quantum communication, magnons in spin ensembles for quantum information storage and mechanical modes for reversible microwave-to-optical quantum transduction. There is emerging interest in utilizing bosonic modes for quantum information processing, with circuit quantum electrodynamics (circuit QED) a… ▽ More Bosonic modes have wide applications in various quantum technologies, such as optical photons for quantum communication, magnons in spin ensembles for quantum information storage and mechanical modes for reversible microwave-to-optical quantum transduction. There is emerging interest in utilizing bosonic modes for quantum information processing, with circuit quantum electrodynamics (circuit QED) as one of the leading architectures. Quantum information can be encoded into subspaces of a bosonic superconducting cavity mode with long coherence time. However, standard Gaussian operations (e.g., beam splitting and two-mode squeezing) are insufficient for universal quantum computing. The major challenge is to introduce additional nonlinear control beyond Gaussian operations without adding significant bosonic loss or decoherence. Here we review recent advances in universal control of a single bosonic code with superconducting circuits, including unitary control, quantum feedback control, driven-dissipative control and holonomic dissipative control. Various approaches to entangling different bosonic modes are also discussed. △ Less

Submitted 17 June, 2021; v1 submitted 18 February, 2021; originally announced February 2021.

Comments: 23 pages, 9 figures, 1 table (+2 pages supplement with 1 figure)

Journal ref: Science Bulletin 66, 1789-1805 (2021)

Single-shot number-resolved detection of microwave photons with error mitigation

Authors: Jacob C. Curtis, Connor T. Hann, Salvatore S. Elder, Christopher S. Wang, Luigi Frunzio, Liang Jiang, Robert J. Schoelkopf

Abstract: Single-photon detectors are ubiquitous and integral components of photonic quantum cryptography, communication, and computation. Many applications, however, require not only detecting the presence of any photons, but distinguishing the number present with a single shot. Here, we implement a single-shot, high-fidelity photon number-resolving detector of up to 15 microwave photons in a cavity-qubit… ▽ More Single-photon detectors are ubiquitous and integral components of photonic quantum cryptography, communication, and computation. Many applications, however, require not only detecting the presence of any photons, but distinguishing the number present with a single shot. Here, we implement a single-shot, high-fidelity photon number-resolving detector of up to 15 microwave photons in a cavity-qubit circuit QED platform. This detector functions by measuring a series of generalized parity operators which make up the bits in the binary decomposition of the photon number. Our protocol consists of successive, independent measurements of each bit by entangling the ancilla with the cavity, then reading out and resetting the ancilla. Photon loss and ancilla readout errors can flip one or more bits, causing nontrivial errors in the outcome, but these errors have a traceable form which can be captured in a simple hidden Markov model. Relying on the independence of each bit measurement, we mitigate biases in ensembles of measurements, showing good agreement with the predictions of the model. The mitigation improves the average total variation distance error of Fock states from $13.5\%$ to $1.1\%$. We also show that the mitigation is efficiently scalable to an $M$-mode system provided that the errors are independent and sufficiently small. Our work motivates the development of new algorithms that utilize single-shot, high-fidelity PNR detectors. △ Less

Submitted 10 February, 2021; v1 submitted 9 October, 2020; originally announced October 2020.

Comments: 15 pages, 7 figures

Journal ref: Phys. Rev. A 103, 023705 (2021)

Error-detected state transfer and entanglement in a superconducting quantum network

Authors: Luke D. Burkhart, James Teoh, Yaxing Zhang, Christopher J. Axline, Luigi Frunzio, M. H. Devoret, Liang Jiang, S. M. Girvin, R. J. Schoelkopf

Abstract: Modular networks are a promising paradigm for increasingly complex quantum devices based on the ability to transfer qubits and generate entanglement between modules. These tasks require a low-loss, high-speed intermodule link that enables extensible network connectivity. Satisfying these demands simultaneously remains an outstanding goal for long-range optical quantum networks as well as modular s… ▽ More Modular networks are a promising paradigm for increasingly complex quantum devices based on the ability to transfer qubits and generate entanglement between modules. These tasks require a low-loss, high-speed intermodule link that enables extensible network connectivity. Satisfying these demands simultaneously remains an outstanding goal for long-range optical quantum networks as well as modular superconducting processors within a single cryostat. We demonstrate communication and entanglement in a superconducting network with a microwave-actuated beamsplitter transformation between two bosonic qubits, which are housed in separate modules and joined by a demountable coaxial bus resonator. We transfer a qubit in a multi-photon encoding and track photon loss events to improve the fidelity, making it as high as in a single-photon encoding. Furthermore, generating entanglement with two-photon interference and postselection against loss errors produces a Bell state with success probability 79% and fidelity 0.94, halving the error obtained with a single photon. These capabilities demonstrate several promising methods for faithful operations between modules, including novel possibilities for resource-efficient direct gates. △ Less

Submitted 13 April, 2020; originally announced April 2020.

Journal ref: PRX Quantum 2, 030321 (2021)

Path-Independent Quantum Gates with Noisy Ancilla

Authors: Wen-Long Ma, Mengzhen Zhang, Yat Wong, Kyungjoo Noh, Serge Rosenblum, Philip Reinhold, Robert J. Schoelkopf, Liang Jiang

Abstract: Ancilla systems are often indispensable to universal control of a nearly isolated quantum system. However, ancilla systems are typically more vulnerable to environmental noise, which limits the performance of such ancilla-assisted quantum control. To address this challenge of ancilla-induced decoherence, we propose a general framework that integrates quantum control and quantum error correction, s… ▽ More Ancilla systems are often indispensable to universal control of a nearly isolated quantum system. However, ancilla systems are typically more vulnerable to environmental noise, which limits the performance of such ancilla-assisted quantum control. To address this challenge of ancilla-induced decoherence, we propose a general framework that integrates quantum control and quantum error correction, so that we can achieve robust quantum gates resilient to ancilla noise. We introduce the path independence criterion for fault-tolerant quantum gates against ancilla errors. As an example, a path-independent gate is provided for superconducting circuits with a hardware-efficient design. △ Less

Submitted 9 August, 2020; v1 submitted 27 November, 2019; originally announced November 2019.

Comments: 6 pages, 2 figures (+15 pages supplement)

Journal ref: Phys. Rev. Lett. 125, 110503 (2020)

Free-standing silicon shadow masks for transmon qubit fabrication

Authors: I. Tsioutsios, K. Serniak, S. Diamond, V. V. Sivak, Z. Wang, S. Shankar, L. Frunzio, R. J. Schoelkopf, M. H. Devoret

Abstract: Nanofabrication techniques for superconducting qubits rely on resist-based masks patterned by electron-beam or optical lithography. We have developed an alternative nanofabrication technique based on free-standing silicon shadow masks fabricated from silicon-on-insulator wafers. These silicon shadow masks not only eliminate organic residues associated with resist-based lithography, but also provid… ▽ More Nanofabrication techniques for superconducting qubits rely on resist-based masks patterned by electron-beam or optical lithography. We have developed an alternative nanofabrication technique based on free-standing silicon shadow masks fabricated from silicon-on-insulator wafers. These silicon shadow masks not only eliminate organic residues associated with resist-based lithography, but also provide a pathway to better understand and control surface-dielectric losses in superconducting qubits by decoupling mask fabrication from substrate preparation. We have successfully fabricated aluminum 3D transmon superconducting qubits with these shadow masks and found coherence quality factors comparable to those fabricated with standard techniques. △ Less

Submitted 15 August, 2020; v1 submitted 13 November, 2019; originally announced November 2019.

Comments: 6 pages, 6 figures, additional experimental data - new figure, typos corrected, supplementary material (2 pages, 1 figure, 1 table)

Journal ref: AIP Advances 10, 065120 (2020)

Efficient multiphoton sampling of molecular vibronic spectra on a superconducting bosonic processor

Authors: Christopher S. Wang, Jacob C. Curtis, Brian J. Lester, Yaxing Zhang, Yvonne Y. Gao, Jessica Freeze, Victor S. Batista, Patrick H. Vaccaro, Isaac L. Chuang, Luigi Frunzio, Liang Jiang, S. M. Girvin, Robert J. Schoelkopf

Abstract: The efficient simulation of quantum systems is a primary motivating factor for developing controllable quantum machines. For addressing systems with underlying bosonic structure, it is advantageous to utilize a naturally bosonic platform. Optical photons passing through linear networks may be configured to perform quantum simulation tasks, but the efficient preparation and detection of multiphoton… ▽ More The efficient simulation of quantum systems is a primary motivating factor for developing controllable quantum machines. For addressing systems with underlying bosonic structure, it is advantageous to utilize a naturally bosonic platform. Optical photons passing through linear networks may be configured to perform quantum simulation tasks, but the efficient preparation and detection of multiphoton quantum states of light in linear optical systems are challenging. Here, we experimentally implement a boson sampling protocol for simulating molecular vibronic spectra [Nature Photonics $\textbf{9}$, 615 (2015)] in a two-mode superconducting device. In addition to enacting the requisite set of Gaussian operations across both modes, we fulfill the scalability requirement by demonstrating, for the first time in any platform, a high-fidelity single-shot photon number resolving detection scheme capable of resolving up to 15 photons per mode. Furthermore, we exercise the capability of synthesizing non-Gaussian input states to simulate spectra of molecular ensembles in vibrational excited states. We show the re-programmability of our implementation by extracting the spectra of photoelectron processes in H$_2$O, O$_3$, NO$_2$, and SO$_2$. The capabilities highlighted in this work establish the superconducting architecture as a promising platform for bosonic simulations, and by combining them with tools such as Kerr interactions and engineered dissipation, enable the simulation of a wider class of bosonic systems. △ Less

Submitted 16 December, 2019; v1 submitted 9 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. X 10, 021060 (2020)

High-fidelity measurement of qubits encoded in multilevel superconducting circuits

Authors: Salvatore S. Elder, Christopher S. Wang, Philip Reinhold, Connor T. Hann, Kevin S. Chou, Brian J. Lester, Serge Rosenblum, Luigi Frunzio, Liang Jiang, Robert J. Schoelkopf

Abstract: Qubit measurements are central to quantum information processing. In the field of superconducting qubits, standard readout techniques are not only limited by the signal-to-noise ratio, but also by state relaxation during the measurement. In this work, we demonstrate that the limitation due to relaxation can be suppressed by using the many-level Hilbert space of superconducting circuits: in a multi… ▽ More Qubit measurements are central to quantum information processing. In the field of superconducting qubits, standard readout techniques are not only limited by the signal-to-noise ratio, but also by state relaxation during the measurement. In this work, we demonstrate that the limitation due to relaxation can be suppressed by using the many-level Hilbert space of superconducting circuits: in a multilevel encoding, the measurement is only corrupted when multiple errors occur. Employing this technique, we show that we can directly resolve transmon gate errors at the level of one part in $10^3.$ Extending this idea, we apply the same principles to the measurement of a logical qubit encoded in a bosonic mode and detected with a transmon ancilla, implementing a proposal by Hann et al. [Phys. Rev. A \textbf{98} 022305 (2018)]. Qubit state assignments are made based on a sequence of repeated readouts, further reducing the overall infidelity. This approach is quite general and several encodings are studied; the codewords are more distinguishable when the distance between them is increased with respect to photon loss. The tradeoff between multiple readouts and state relaxation is explored and shown to be consistent with the photon-loss model. We report a logical assignment infidelity of $5.8\times 10^{-5}$ for a Fock-based encoding and $4.2\times 10^{-3}$ for a QEC code (the $S=2,N=1$ binomial code). Our results will not only improve the fidelity of quantum information applications, but also enable more precise characterization of process or gate errors. △ Less

Submitted 23 August, 2019; v1 submitted 5 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. X 10, 011001 (2020)

Quantum error correction of a qubit encoded in grid states of an oscillator

Authors: P. Campagne-Ibarcq, A. Eickbusch, S. Touzard, E. Zalys-Geller, N. E. Frattini, V. V. Sivak, P. Reinhold, S. Puri, S. Shankar, R. J. Schoelkopf, L. Frunzio, M. Mirrahimi, M. H. Devoret

Abstract: Quantum bits are more robust to noise when they are encoded non-locally. In such an encoding, errors affecting the underlying physical system can then be detected and corrected before they corrupt the encoded information. In 2001, Gottesman, Kitaev and Preskill (GKP) proposed a hardware-efficient instance of such a qubit, which is delocalised in the phase-space of a single oscillator. However, imp… ▽ More Quantum bits are more robust to noise when they are encoded non-locally. In such an encoding, errors affecting the underlying physical system can then be detected and corrected before they corrupt the encoded information. In 2001, Gottesman, Kitaev and Preskill (GKP) proposed a hardware-efficient instance of such a qubit, which is delocalised in the phase-space of a single oscillator. However, implementing measurements that reveal error syndromes of the oscillator while preserving the encoded information has proved experimentally challenging: the only realisation so far relied on post-selection, which is incompatible with quantum error correction (QEC). The novelty of our experiment is precisely that it implements these non-destructive error-syndrome measurements for a superconducting microwave cavity. We design and implement an original feedback protocol that incorporates such measurements to prepare square and hexagonal GKP code states. We then demonstrate QEC of an encoded qubit with unprecedented suppression of all logical errors, in quantitative agreement with a theoretical estimate based on the measured imperfections of the experiment. Our protocol is applicable to other continuous variable systems and, in contrast with previous implementations of QEC, can mitigate all logical errors generated by a wide variety of noise processes, and open a way towards fault-tolerant quantum computation. △ Less

Submitted 22 March, 2020; v1 submitted 29 July, 2019; originally announced July 2019.

Comments: Text and figures edited for clarity. The claims of the paper remain the same. Author list fixed

Journal ref: Nature 584, 368-372 (2020)

Error-corrected gates on an encoded qubit

Authors: Philip Reinhold, Serge Rosenblum, Wen-Long Ma, Luigi Frunzio, Liang Jiang, Robert J. Schoelkopf

Abstract: To solve classically hard problems, quantum computers need to be resilient to the influence of noise and decoherence. In such a fault-tolerant quantum computer, noise-induced errors must be detected and corrected in real-time to prevent them from propagating between components. This requirement is especially pertinent while applying quantum gates, when the interaction between components can cause… ▽ More To solve classically hard problems, quantum computers need to be resilient to the influence of noise and decoherence. In such a fault-tolerant quantum computer, noise-induced errors must be detected and corrected in real-time to prevent them from propagating between components. This requirement is especially pertinent while applying quantum gates, when the interaction between components can cause errors to quickly spread throughout the system. However, the large overhead involved in most fault-tolerant architectures makes implementing these systems a daunting task, which motivates the search for hardware-efficient alternatives. Here, we present a gate enacted by a multilevel ancilla transmon on a cavity-encoded logical qubit that is fault-tolerant with respect to decoherence in both the ancilla and the encoded qubit. We maintain the purity of the encoded qubit in the presence of ancilla errors by detecting those errors in real-time, and applying the appropriate corrections. We show a reduction of the logical gate error by a factor of two in the presence of naturally occurring decoherence, and demonstrate resilience against ancilla bit-flips and phase-flips by observing a sixfold suppression of the gate error with increased energy relaxation, and a fourfold suppression with increased dephasing noise. The results demonstrate that bosonic logical qubits can be controlled by error-prone ancilla qubits without inheriting the ancilla's inferior performance. As such, error-corrected ancilla-enabled gates are an important step towards fully fault-tolerant processing of bosonic qubits. △ Less

Submitted 29 July, 2019; originally announced July 2019.

Comments: 15 pages, 8 figures

Hardware-efficient quantum random access memory with hybrid quantum acoustic systems

Authors: Connor T. Hann, Chang-Ling Zou, Yaxing Zhang, Yiwen Chu, Robert J. Schoelkopf, Steven M. Girvin, Liang Jiang

Abstract: Hybrid quantum systems in which acoustic resonators couple to superconducting qubits are promising quantum information platforms. High quality factors and small mode volumes make acoustic modes ideal quantum memories, while the qubit-phonon coupling enables the initialization and manipulation of quantum states. We present a scheme for quantum computing with multimode quantum acoustic systems, and… ▽ More Hybrid quantum systems in which acoustic resonators couple to superconducting qubits are promising quantum information platforms. High quality factors and small mode volumes make acoustic modes ideal quantum memories, while the qubit-phonon coupling enables the initialization and manipulation of quantum states. We present a scheme for quantum computing with multimode quantum acoustic systems, and based on this scheme, propose a hardware-efficient implementation of a quantum random access memory (QRAM). Quantum information is stored in high-Q phonon modes, and couplings between modes are engineered by applying off-resonant drives to a transmon qubit. In comparison to existing proposals that involve directly exciting the qubit, this scheme can offer a substantial improvement in gate fidelity for long-lived acoustic modes. We show how these engineered phonon-phonon couplings can be used to access data in superposition according to the state of designated address modes--implementing a QRAM on a single chip. △ Less

Submitted 8 January, 2020; v1 submitted 26 June, 2019; originally announced June 2019.

Comments: 24 pages, 10 figures; updated to include expanded supplementary material

Journal ref: Phys. Rev. Lett. 123, 250501 (2019)

Quantum back-action of variable-strength measurement

Authors: M. Hatridge, S. Shankar, M. Mirrahimi, F. Schackert, K. Geerlings, T. Brecht, K. M. Sliwa, B. Abdo, L. Frunzio, S. M. Girvin, R. J. Schoelkopf, M. H. Devoret

Abstract: Measuring a quantum system can randomly perturb its state. The strength and nature of this back-action depends on the quantity which is measured. In a partial measurement performed by an ideal apparatus, quantum physics predicts that the system remains in a pure state whose evolution can be tracked perfectly from the measurement record. We demonstrate this property using a superconducting qubit di… ▽ More Measuring a quantum system can randomly perturb its state. The strength and nature of this back-action depends on the quantity which is measured. In a partial measurement performed by an ideal apparatus, quantum physics predicts that the system remains in a pure state whose evolution can be tracked perfectly from the measurement record. We demonstrate this property using a superconducting qubit dispersively coupled to a cavity traversed by a microwave signal. The back-action on the qubit state of a single measurement of both signal quadratures is observed and shown to produce a stochastic operation whose action is determined by the measurement result. This accurate monitoring of a qubit state is an essential prerequisite for measurement-based feedback control of quantum systems. △ Less

Submitted 27 March, 2019; originally announced March 2019.

Journal ref: Science 11 Jan 2013: Vol. 339, Issue 6116, pp. 178-181

Direct Dispersive Monitoring of Charge Parity in Offset-Charge-Sensitive Transmons

Authors: K. Serniak, S. Diamond, M. Hays, V. Fatemi, S. Shankar, L. Frunzio, R. J. Schoelkopf, M. H. Devoret

Abstract: A striking characteristic of superconducting circuits is that their eigenspectra and intermode coupling strengths are well predicted by simple Hamiltonians representing combinations of quantum circuit elements. Of particular interest is the Cooper-pair-box Hamiltonian used to describe the eigenspectra of transmon qubits, which can depend strongly on the offset-charge difference across the Josephso… ▽ More A striking characteristic of superconducting circuits is that their eigenspectra and intermode coupling strengths are well predicted by simple Hamiltonians representing combinations of quantum circuit elements. Of particular interest is the Cooper-pair-box Hamiltonian used to describe the eigenspectra of transmon qubits, which can depend strongly on the offset-charge difference across the Josephson element. Notably, this offset-charge dependence can also be observed in the dispersive coupling between an ancillary readout mode and a transmon fabricated in the offset-charge-sensitive (OCS) regime. We utilize this effect to achieve direct, high-fidelity dispersive readout of the joint plasmon and charge-parity state of an OCS transmon, which enables efficient detection of charge fluctuations and nonequilibrium-quasiparticle dynamics. Specifically, we show that additional high-frequency filtering can extend the charge-parity lifetime of our device by two orders of magnitude, resulting in a significantly improved energy relaxation time $T_1\sim200~μ\mathrm{s}$. △ Less

Submitted 30 July, 2019; v1 submitted 28 February, 2019; originally announced March 2019.

Comments: 11 pages, 9 figures

Journal ref: Phys. Rev. Applied 12, 014052 (2019)

Engineering bilinear mode coupling in circuit QED: Theory and experiment

Authors: Yaxing Zhang, Brian J. Lester, Yvonne Y. Gao, Liang Jiang, R. J. Schoelkopf, S. M. Girvin

Abstract: Photonic states of superconducting microwave cavities controlled by transmon ancillas provide a platform for encoding and manipulating quantum information. A key challenge in scaling up the platform is the requirement to communicate on demand the information between the cavities. It has been recently demonstrated that a tunable bilinear interaction between two cavities can be realized by coupling… ▽ More Photonic states of superconducting microwave cavities controlled by transmon ancillas provide a platform for encoding and manipulating quantum information. A key challenge in scaling up the platform is the requirement to communicate on demand the information between the cavities. It has been recently demonstrated that a tunable bilinear interaction between two cavities can be realized by coupling them to a bichromatically-driven transmon ancilla, which allows swapping and interfering the multi-photon states of the cavities [Gao et al., Phys. Rev. X 8, 021073(2018)]. Here, we explore both theoretically and experimentally the regime of relatively strong drives on the ancilla needed to achieve fast SWAP gates but which can also lead to undesired non-perturbative effects that lower the SWAP fidelity. We develop a theoretical formalism based on linear response theory that allows one to calculate the rate of ancilla-induced interaction, decay and frequency shift of the cavities in terms of a susceptibility matrix. We treat the drives non-perturbatively using Floquet theory, and find that the interference of the two drives can strongly alter the system dynamics even in the regime where the rotating wave approximation applies. We identify two major sources of infidelity due to ancilla decoherence. i) Ancilla dissipation and dephasing leads to incoherent hopping among Floquet states which occurs even when the ancilla is at zero temperature, resulting in a sudden change of the SWAP rate. ii) The cavities inherit finite decay from the relatively lossy ancilla through the inverse Purcell effect; the effect can be enhanced when the drive-induced AC Stark shift pushes certain ancilla transition frequencies to the vicinity of the cavity frequencies. The theoretical predictions agree quantitatively with the experimental results, paving the way for using the theory to design future experiments. △ Less

Submitted 14 January, 2019; v1 submitted 23 August, 2018; originally announced August 2018.

Comments: 43 pages, 18 figures. Extended discussions on transmon-induced cavity dephasing in Sec. IVD

Journal ref: Phys. Rev. A 99, 012314 (2019)

Entangling Bosonic Modes via an Engineered Exchange Interaction

Authors: Yvonne Y. Gao, Brian J. Lester, Kevin Chou, Luigi Frunzio, Michel H. Devoret, Liang Jiang, S. M. Girvin, Robert J. Schoelkopf

Abstract: The realization of robust universal quantum computation with any platform ultimately requires both the coherent storage of quantum information and (at least) one entangling operation between individual elements. The use of continuous-variable bosonic modes as the quantum element is a promising route to preserve the coherence of quantum information against naturally-occurring errors. However, opera… ▽ More The realization of robust universal quantum computation with any platform ultimately requires both the coherent storage of quantum information and (at least) one entangling operation between individual elements. The use of continuous-variable bosonic modes as the quantum element is a promising route to preserve the coherence of quantum information against naturally-occurring errors. However, operations between bosonic modes can be challenging. In analogy to the exchange interaction between discrete-variable spin systems, the exponential-SWAP unitary [$\mathbf{U}_{\mathrm{E}}\left(θ_c\right)$] can coherently transfer the states between two bosonic modes, regardless of the chosen encoding, realizing a deterministic entangling operation for certain $θ_c$. Here, we develop an efficient circuit to implement $\mathbf{U}_{\mathrm{E}}\left(θ_c\right)$ and realize the operation in a three-dimensional circuit QED architecture. We demonstrate high-quality deterministic entanglement between two cavity modes with several different encodings. Our results provide a crucial primitive necessary for universal quantum computation using bosonic modes. △ Less

Submitted 19 June, 2018; originally announced June 2018.

Comments: 13 pages, 10 figures, 4 tables

Creation and control of multi-phonon Fock states in a bulk acoustic wave resonator

Authors: Yiwen Chu, Prashanta Kharel, Taekwan Yoon, Luigi Frunzio, Peter T. Rakich, Robert J. Schoelkopf

Abstract: Quantum states of mechanical motion can be important resources for quantum information, metrology, and studies of fundamental physics. Recent demonstrations of superconducting qubits coupled to acoustic resonators have opened up the possibility of performing quantum operations on macroscopic motional modes, which can act as long-lived quantum memories or transducers. In addition, they can potentia… ▽ More Quantum states of mechanical motion can be important resources for quantum information, metrology, and studies of fundamental physics. Recent demonstrations of superconducting qubits coupled to acoustic resonators have opened up the possibility of performing quantum operations on macroscopic motional modes, which can act as long-lived quantum memories or transducers. In addition, they can potentially be used to test for novel decoherence mechanisms in macroscopic objects and other modifications to standard quantum theory. Many of these applications call for the ability to create and characterize complex quantum states, putting demanding requirements on the speed of quantum operations and the coherence of the mechanical mode. In this work, we demonstrate the controlled generation of multi-phonon Fock states in a macroscopic bulk-acoustic wave resonator. We also perform Wigner tomography and state reconstruction to highlight the quantum nature of the prepared states. These demonstrations are made possible by the long coherence times of our acoustic resonator and our ability to selectively couple to individual phonon modes. Our work shows that circuit quantum acousto-dynamics (circuit QAD) enables sophisticated quantum control of macroscopic mechanical objects and opens the door to using acoustic modes as novel quantum resources. △ Less

Submitted 2 November, 2018; v1 submitted 19 April, 2018; originally announced April 2018.

Comments: Includes main text and supplementary information

To catch and reverse a quantum jump mid-flight

Authors: Z. K. Minev, S. O. Mundhada, S. Shankar, P. Reinhold, R. Gutierrez-Jauregui, R. J. Schoelkopf, M. Mirrahimi, H. J. Carmichael, M. H. Devoret

Abstract: Quantum physics was invented to account for two fundamental features of measurement results -- their discreetness and randomness. Emblematic of these features is Bohr's idea of quantum jumps between two discrete energy levels of an atom. Experimentally, quantum jumps were first observed in an atomic ion driven by a weak deterministic force while under strong continuous energy measurement. The time… ▽ More Quantum physics was invented to account for two fundamental features of measurement results -- their discreetness and randomness. Emblematic of these features is Bohr's idea of quantum jumps between two discrete energy levels of an atom. Experimentally, quantum jumps were first observed in an atomic ion driven by a weak deterministic force while under strong continuous energy measurement. The times at which the discontinuous jump transitions occur are reputed to be fundamentally unpredictable. Can there be, despite the indeterminism of quantum physics, a possibility to know if a quantum jump is about to occur or not? Here, we answer this question affirmatively by experimentally demonstrating that the jump from the ground to an excited state of a superconducting artificial three-level atom can be tracked as it follows a predictable "flight," by monitoring the population of an auxiliary energy level coupled to the ground state. The experimental results demonstrate that the jump evolution when completed is continuous, coherent, and deterministic. Furthermore, exploiting these features and using real-time monitoring and feedback, we catch and reverse a quantum jump mid-flight, thus deterministically preventing its completion. Our results, which agree with theoretical predictions essentially without adjustable parameters, support the modern quantum trajectory theory and provide new ground for the exploration of real-time intervention techniques in the control of quantum systems, such as early detection of error syndromes. △ Less

Submitted 12 February, 2019; v1 submitted 1 March, 2018; originally announced March 2018.

Comments: Clarified and expanded the introduction and conclusion. Reorganized Methods and Supplementary Information. Revised and expanded citations. Corrected a few remaining minor typos

Journal ref: Nature 570, 200 (2019); see also arXiv:1902.10355 [quant-ph]

Fault-tolerant detection of a quantum error

Authors: S. Rosenblum, P. Reinhold, M. Mirrahimi, Liang Jiang, L. Frunzio, R. J. Schoelkopf

Abstract: A critical component of any quantum error-correcting scheme is detection of errors by using an ancilla system. However, errors occurring in the ancilla can propagate onto the logical qubit, irreversibly corrupting the encoded information. We demonstrate a fault-tolerant error-detection scheme that suppresses spreading of ancilla errors by a factor of 5, while maintaining the assignment fidelity. T… ▽ More A critical component of any quantum error-correcting scheme is detection of errors by using an ancilla system. However, errors occurring in the ancilla can propagate onto the logical qubit, irreversibly corrupting the encoded information. We demonstrate a fault-tolerant error-detection scheme that suppresses spreading of ancilla errors by a factor of 5, while maintaining the assignment fidelity. The same method is used to prevent propagation of ancilla excitations, increasing the logical qubit dephasing time by an order of magnitude. Our approach is hardware-efficient, as it uses a single multilevel transmon ancilla and a cavity-encoded logical qubit, whose interaction is engineered in situ by using an off-resonant sideband drive. The results demonstrate that hardware-efficient approaches that exploit system-specific error models can yield advances toward fault-tolerant quantum computation. △ Less

Submitted 11 May, 2019; v1 submitted 28 February, 2018; originally announced March 2018.

Journal ref: Science 361, 266 (2018)

Programmable interference between two microwave quantum memories

Authors: Yvonne Y. Gao, B. J. Lester, Yaxing Zhang, C. Wang, S. Rosenblum, L. Frunzio, Liang Jiang, S. M. Girvin, R. J. Schoelkopf

Abstract: Interference experiments provide a simple yet powerful tool to unravel fundamental features of quantum physics. Here we engineer an RF-driven, time-dependent bilinear coupling that can be tuned to implement a robust 50:50 beamsplitter between stationary states stored in two superconducting cavities in a three-dimensional architecture. With this, we realize high contrast Hong-Ou- Mandel (HOM) inter… ▽ More Interference experiments provide a simple yet powerful tool to unravel fundamental features of quantum physics. Here we engineer an RF-driven, time-dependent bilinear coupling that can be tuned to implement a robust 50:50 beamsplitter between stationary states stored in two superconducting cavities in a three-dimensional architecture. With this, we realize high contrast Hong-Ou- Mandel (HOM) interference between two spectrally-detuned stationary modes. We demonstrate that this coupling provides an efficient method for measuring the quantum state overlap between arbitrary states of the two cavities. Finally, we showcase concatenated beamsplitters and differential phase shifters to implement cascaded Mach-Zehnder interferometers, which can control the signature of the two-photon interference on-demand. Our results pave the way toward implementation of scalable boson sampling, the application of linear optical quantum computing (LOQC) protocols in the microwave domain, and quantum algorithms between long-lived bosonic memories. △ Less

Submitted 2 May, 2018; v1 submitted 23 February, 2018; originally announced February 2018.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. X 8, 021073 (2018)

Deterministic teleportation of a quantum gate between two logical qubits

Authors: K. S. Chou, J. Z. Blumoff, C. S. Wang, P. C. Reinhold, C. J. Axline, Y. Y. Gao, L. Frunzio, M. H. Devoret, Liang Jiang, R. J. Schoelkopf

Abstract: A quantum computer has the potential to effciently solve problems that are intractable for classical computers. Constructing a large-scale quantum processor, however, is challenging due to errors and noise inherent in real-world quantum systems. One approach to this challenge is to utilize modularity--a pervasive strategy found throughout nature and engineering--to build complex systems robustly.… ▽ More A quantum computer has the potential to effciently solve problems that are intractable for classical computers. Constructing a large-scale quantum processor, however, is challenging due to errors and noise inherent in real-world quantum systems. One approach to this challenge is to utilize modularity--a pervasive strategy found throughout nature and engineering--to build complex systems robustly. Such an approach manages complexity and uncertainty by assembling small, specialized components into a larger architecture. These considerations motivate the development of a quantum modular architecture, where separate quantum systems are combined via communication channels into a quantum network. In this architecture, an essential tool for universal quantum computation is the teleportation of an entangling quantum gate, a technique originally proposed in 1999 which, until now, has not been realized deterministically. Here, we experimentally demonstrate a teleported controlled-NOT (CNOT) operation made deterministic by utilizing real-time adaptive control. Additionally, we take a crucial step towards implementing robust, error-correctable modules by enacting the gate between logical qubits, encoding quantum information redundantly in the states of superconducting cavities. Such teleported operations have significant implications for fault-tolerant quantum computation, and when realized within a network can have broad applications in quantum communication, metrology, and simulations. Our results illustrate a compelling approach for implementing multi-qubit operations on logical qubits within an error-protected quantum modular architecture. △ Less

Submitted 16 January, 2018; originally announced January 2018.

Comments: Main text: 7 pages, 4 figures; Supplementary Information: 26 pages, 13 figures

Robust readout of bosonic qubits in the dispersive coupling regime

Authors: Connor T. Hann, Salvatore S. Elder, Christopher S. Wang, Kevin Chou, Robert J. Schoelkopf, Liang Jiang

Abstract: High-fidelity qubit measurements play a crucial role in quantum computation, communication, and metrology. In recent experiments, it has been shown that readout fidelity may be improved by performing repeated quantum non-demolition (QND) readouts of a qubit's state through an ancilla. For a qubit encoded in a two-level system, the fidelity of such schemes is limited by the fact that a single error… ▽ More High-fidelity qubit measurements play a crucial role in quantum computation, communication, and metrology. In recent experiments, it has been shown that readout fidelity may be improved by performing repeated quantum non-demolition (QND) readouts of a qubit's state through an ancilla. For a qubit encoded in a two-level system, the fidelity of such schemes is limited by the fact that a single error can destroy the information in the qubit. On the other hand, if a bosonic system is used, this fundamental limit could be overcome by utilizing higher levels such that a single error still leaves states distinguishable. In this work, we present a robust readout scheme, applicable to bosonic systems dispersively coupled to an ancilla, which leverages both repeated QND readouts and higher-level encodings to asymptotically suppress the effects of qubit/cavity relaxation and individual measurement infidelity. We calculate the measurement fidelity in terms of general experimental parameters, provide an information-theoretic description of the scheme, and describe its application to several encodings, including cat and binomial codes. △ Less

Submitted 8 August, 2018; v1 submitted 20 December, 2017; originally announced December 2017.

Comments: 15 pages, 8 figures

Journal ref: Phys. Rev. A 98, 022305 (2018)

Deterministic remote entanglement of superconducting circuits through microwave two-photon transitions

Authors: P. Campagne-Ibarcq, E. Zalys-Geller, A. Narla, S. Shankar, P. Reinhold, L. D. Burkhart, C. J. Axline, W. Pfaff, L. Frunzio, R. J. Schoelkopf, M. H. Devoret

Abstract: Large-scale quantum information processing networks will most probably require the entanglement of distant systems that do not interact directly. This can be done by performing entangling gates between standing information carriers, used as memories or local computational resources, and flying ones, acting as quantum buses. We report the deterministic entanglement of two remote transmon qubits by… ▽ More Large-scale quantum information processing networks will most probably require the entanglement of distant systems that do not interact directly. This can be done by performing entangling gates between standing information carriers, used as memories or local computational resources, and flying ones, acting as quantum buses. We report the deterministic entanglement of two remote transmon qubits by Raman stimulated emission and absorption of a traveling photon wavepacket. We achieve a Bell state fidelity of 73 %, well explained by losses in the transmission line and decoherence of each qubit. △ Less

Submitted 15 December, 2017; originally announced December 2017.

Journal ref: Phys. Rev. Lett. 120, 200501 (2018)

On-demand quantum state transfer and entanglement between remote microwave cavity memories

Authors: Christopher Axline, Luke Burkhart, Wolfgang Pfaff, Mengzhen Zhang, Kevin Chou, Philippe Campagne-Ibarcq, Philip Reinhold, Luigi Frunzio, S. M. Girvin, Liang Jiang, M. H. Devoret, R. J. Schoelkopf

Abstract: Modular quantum computing architectures require fast and efficient distribution of quantum information through propagating signals. Here we report rapid, on-demand quantum state transfer between two remote superconducting cavity quantum memories through traveling microwave photons. We demonstrate a quantum communication channel by deterministic transfer of quantum bits with 76% fidelity. Heralding… ▽ More Modular quantum computing architectures require fast and efficient distribution of quantum information through propagating signals. Here we report rapid, on-demand quantum state transfer between two remote superconducting cavity quantum memories through traveling microwave photons. We demonstrate a quantum communication channel by deterministic transfer of quantum bits with 76% fidelity. Heralding on errors induced by experimental imperfection can improve this to 87% with a success probability of 0.87. By partial transfer of a microwave photon, we generate remote entanglement at a rate that exceeds photon loss in either memory by more than a factor of three. We further show the transfer of quantum error correction code words that will allow deterministic mitigation of photon loss. These results pave the way for scaling superconducting quantum devices through modular quantum networks. △ Less

Submitted 15 December, 2017; originally announced December 2017.

Comments: main text 7 pages, 4 figures; supplement 16 pages, 16 figures

A CNOT gate between multiphoton qubits encoded in two cavities

Authors: Serge Rosenblum, Yvonne Y. Gao, Philip Reinhold, Chen Wang, Christopher J. Axline, Luigi Frunzio, Steven M. Girvin, Liang Jiang, Mazyar Mirrahimi, Michel H. Devoret, Robert J. Schoelkopf

Abstract: Entangling gates between qubits are a crucial component for performing algorithms in quantum computers. However, any quantum algorithm must ultimately operate on error-protected logical qubits encoded in high-dimensional systems. Typically, logical qubits are encoded in multiple two-level systems, but entangling gates operating on such qubits are highly complex and have not yet been demonstrated.… ▽ More Entangling gates between qubits are a crucial component for performing algorithms in quantum computers. However, any quantum algorithm must ultimately operate on error-protected logical qubits encoded in high-dimensional systems. Typically, logical qubits are encoded in multiple two-level systems, but entangling gates operating on such qubits are highly complex and have not yet been demonstrated. Here, we realize a controlled NOT (CNOT) gate between two multiphoton qubits in two microwave cavities. In this approach, we encode a qubit in the high-dimensional space of a single cavity mode, rather than in multiple two-level systems. We couple two such encoded qubits together through a transmon, which is driven by an RF pump to apply the gate within 190 ns. This is two orders of magnitude shorter than the decoherence time of the transmon, enabling a high-fidelity gate operation. These results are an important step towards universal algorithms on error-corrected logical qubits. △ Less

Submitted 19 December, 2017; v1 submitted 15 September, 2017; originally announced September 2017.

Comments: 10 pages, 11 figures (incl. Supplementary Information)

Optimal configurations for normal-metal traps in transmon qubits

Authors: A. Hosseinkhani, R. -P. Riwar, R. J. Schoelkopf, L. I. Glazman, G. Catelani

Abstract: Controlling quasiparticle dynamics can improve the performance of superconducting devices. For example, it has been demonstrated effective in increasing lifetime and stability of superconducting qubits. Here we study how to optimize the placement of normal-metal traps in transmon-type qubits. When the trap size increases beyond a certain characteristic length, the details of the geometry and trap… ▽ More Controlling quasiparticle dynamics can improve the performance of superconducting devices. For example, it has been demonstrated effective in increasing lifetime and stability of superconducting qubits. Here we study how to optimize the placement of normal-metal traps in transmon-type qubits. When the trap size increases beyond a certain characteristic length, the details of the geometry and trap position, and even the number of traps, become important. We discuss for some experimentally relevant examples how to shorten the decay time of the excess quasiparticle density. Moreover, we show that a trap in the vicinity of a Josephson junction can reduce the steady-state quasiparticle density near that junction, thus suppressing the quasiparticle-induced relaxation rate of the qubit. Such a trap also reduces the impact of fluctuations in the generation rate of quasiparticles, rendering the qubit more stable. △ Less

Submitted 8 December, 2017; v1 submitted 28 June, 2017; originally announced June 2017.

Comments: 16 pages, 7 figures; to appear in Phys. Rev. Applied

Journal ref: Phys. Rev. Applied 8, 064028 (2017)

Coherent oscillations inside a quantum manifold stabilized by dissipation

Authors: S. Touzard, A. Grimm, Z. Leghtas, S. O. Mundhada, P. Reinhold, R. Heeres, C. Axline, M. Reagor, K. Chou, J. Blumoff, K. M. Sliwa, S. Shankar, L. Frunzio, R. J. Schoelkopf, M. Mirrahimi, M. H. Devoret

Abstract: Manipulating the state of a logical quantum bit usually comes at the expense of exposing it to decoherence. Fault-tolerant quantum computing tackles this problem by manipulating quantum information within a stable manifold of a larger Hilbert space, whose symmetries restrict the number of independent errors. The remaining errors do not affect the quantum computation and are correctable after the f… ▽ More Manipulating the state of a logical quantum bit usually comes at the expense of exposing it to decoherence. Fault-tolerant quantum computing tackles this problem by manipulating quantum information within a stable manifold of a larger Hilbert space, whose symmetries restrict the number of independent errors. The remaining errors do not affect the quantum computation and are correctable after the fact. Here we implement the autonomous stabilization of an encoding manifold spanned by Schroedinger cat states in a superconducting cavity. We show Zeno-driven coherent oscillations between these states analogous to the Rabi rotation of a qubit protected against phase-flips. Such gates are compatible with quantum error correction and hence are crucial for fault-tolerant logical qubits. △ Less

Submitted 13 November, 2017; v1 submitted 5 May, 2017; originally announced May 2017.

Journal ref: Phys. Rev. X 8, 021005 (2018)

Faithful conversion of propagating quantum information to mechanical motion

Authors: A. P. Reed, K. H. Mayer, J. D. Teufel, L. D. Burkhart, W. Pfaff, M. Reagor, L. Sletten, X. Ma, R. J. Schoelkopf, E. Knill, K. W. Lehnert

Abstract: We convert propagating qubits encoded as superpositions of zero and one photons to the motion of a micrometer-sized mechanical resonator. Using quantum state tomography, we determine the density matrix of both the propagating photons and the mechanical resonator. By comparing a sufficient set of states before and after conversion, we determine the average process fidelity to be… ▽ More We convert propagating qubits encoded as superpositions of zero and one photons to the motion of a micrometer-sized mechanical resonator. Using quantum state tomography, we determine the density matrix of both the propagating photons and the mechanical resonator. By comparing a sufficient set of states before and after conversion, we determine the average process fidelity to be $F_{\textrm{avg}} = 0.83\substack{+0.03-0.06}$ which exceeds the classical bound for the conversion of an arbitrary qubit state. This conversion ability is necessary for using mechanical resonators in emerging quantum communication and modular quantum computation architectures. △ Less

Submitted 7 March, 2017; originally announced March 2017.

Comments: 22 pages, 14 figures (including Supplementary Information)