-
Probing the quantum motion of a macroscopic mechanical oscillator with a radio-frequency superconducting qubit
Authors:
Kyrylo Gerashchenko,
Remi Rousseau,
Léo Balembois,
Himanshu Patange,
Paul Manset,
W. Clarke Smith,
Zaki Leghtas,
Emmanuel Flurin,
Thibaut Jacqmin,
Samuel Deléglise
Abstract:
Long-lived mechanical resonators like drums oscillating at MHz frequencies and operating in the quantum regime offer a powerful platform for quantum technologies and tests of fundamental physics. Yet, quantum control of such systems remains challenging, particularly owing to their low energy scale and the difficulty of achieving efficient coupling to other well-controlled quantum devices. Here, we…
▽ More
Long-lived mechanical resonators like drums oscillating at MHz frequencies and operating in the quantum regime offer a powerful platform for quantum technologies and tests of fundamental physics. Yet, quantum control of such systems remains challenging, particularly owing to their low energy scale and the difficulty of achieving efficient coupling to other well-controlled quantum devices. Here, we demonstrate repeated, and high-fidelity interactions between a 4 MHz suspended silicon nitride membrane and a resonant superconducting heavy-fluxonium qubit. The qubit is initialized at an effective temperature of 27~$\mathrmμ$K and read out in a single-shot with 77% fidelity. During the membrane's 6~ms lifetime, the two systems swap excitations more than 300 times. After each interaction, a state-selective detection is performed, implementing a stroboscopic series of weak measurements that provide information about the mechanical state. The accumulated records reconstruct the membrane's position noise-spectrum, revealing both its thermal occupation $n_\mathrm{th}\approx47$ at 10~mK and the qubit-induced back-action. By preparing the qubit either in its ground or excited state before each interaction, we observe an imbalance between the emission and absorption spectra, proportional to $n_\mathrm{th}$ and $n_\mathrm{th}+1$, respectively-a hallmark of the non-commutation of phonon creation and annihilation operators. Since the predicted Diósi-Penrose gravitational collapse time is comparable to the measured mechanical decoherence time, our architecture enters a regime where gravity-induced decoherence could be tested directly.
△ Less
Submitted 27 May, 2025;
originally announced May 2025.
-
Hyperinductance based on stacked Josephson junctions
Authors:
Paul Manset,
José Palomo,
Aurélien Schmitt,
Kyrylo Gerashchenko,
Rémi Rousseau,
Himanshu Patange,
Patrick Abgrall,
Emmanuel Flurin,
Samuel Deléglise,
Thibaut Jacqmin,
Léo Balembois
Abstract:
Superinductances are superconducting circuit elements that combine a large inductance with a low parasitic capacitance to ground, resulting in a characteristic impedance exceeding the resistance quantum $R_Q = h/(2e)^2 \simeq 6.45 \mathrm{k}Ω$. In recent years, these components have become key enablers for emerging quantum circuit architectures. However, achieving high characteristic impedance whi…
▽ More
Superinductances are superconducting circuit elements that combine a large inductance with a low parasitic capacitance to ground, resulting in a characteristic impedance exceeding the resistance quantum $R_Q = h/(2e)^2 \simeq 6.45 \mathrm{k}Ω$. In recent years, these components have become key enablers for emerging quantum circuit architectures. However, achieving high characteristic impedance while maintaining scalability and fabrication robustness remains a major challenge. In this work, we present two fabrication techniques for realizing superinductances based on vertically stacked Josephson junctions. Using a multi-angle Manhattan (MAM) process and a zero-angle (ZA) evaporation technique -- in which junction stacks are connected pairwise using airbridges -- we fabricate one-dimensional chains of stacks that act as high-impedance superconducting transmission lines. Two-tone microwave spectroscopy reveals the expected $\sqrt{n}$ scaling of the impedance with the number of junctions per stack. The chain fabricated using the ZA process, with nine junctions per stack, achieves a characteristic impedance of $\sim 16 \mathrm{k}Ω$, a total inductance of $5.9 \mathrm{μH}$, and a maximum frequency-dependent impedance of $50 \mathrm{k}Ω$ at 1.4 GHz. Our results establish junction stacking as a scalable, robust, and flexible platform for next-generation quantum circuits requiring ultra-high impedance environments.
△ Less
Submitted 5 May, 2025;
originally announced May 2025.
-
High-sensitivity AC-charge detection with a MHz-frequency fluxonium qubit
Authors:
B. -L. Najera-Santos,
R. Rousseau,
K. Gerashchenko,
H. Patange,
A. Riva,
M. Villiers,
T. Briant,
P. -F. Cohadon,
A. Heidmann,
J. Palomo,
M. Rosticher,
H. le Sueur,
A. Sarlette,
W. C. Smith,
Z. Leghtas,
E. Flurin,
T. Jacqmin,
S. Deléglise
Abstract:
Owing to their strong dipole moment and long coherence times, superconducting qubits have demonstrated remarkable success in hybrid quantum circuits. However, most qubit architectures are limited to the GHz frequency range, severely constraining the class of systems they can interact with. The fluxonium qubit, on the other hand, can be biased to very low frequency while being manipulated and read…
▽ More
Owing to their strong dipole moment and long coherence times, superconducting qubits have demonstrated remarkable success in hybrid quantum circuits. However, most qubit architectures are limited to the GHz frequency range, severely constraining the class of systems they can interact with. The fluxonium qubit, on the other hand, can be biased to very low frequency while being manipulated and read out with standard microwave techniques. Here, we design and operate a heavy fluxonium with an unprecedentedly low transition frequency of $1.8~\mathrm{MHz}$. We demonstrate resolved sideband cooling of the ``hot'' qubit transition with a final ground state population of $97.7~\%$, corresponding to an effective temperature of $23~μ\mathrm{K}$. We further demonstrate coherent manipulation with coherence times $T_1=34~μ\mathrm{s}$, $T_2^*=39~μ\mathrm{s}$, and single-shot readout of the qubit state. Importantly, by directly addressing the qubit transition with a capacitively coupled waveguide, we showcase its high sensitivity to a radio-frequency field. Through cyclic qubit preparation and interrogation, we transform this low-frequency fluxonium qubit into a frequency-resolved charge sensor. This method results in a charge sensitivity of $33~μ\mathrm{e}/\sqrt{\mathrm{Hz}}$, or an energy sensitivity (in joules per hertz) of $2.8~\hbar$. This method rivals state-of-the-art transport-based devices, while maintaining inherent insensitivity to DC charge noise. The high charge sensitivity combined with large capacitive shunt unlocks new avenues for exploring quantum phenomena in the $1-10~\mathrm{MHz}$ range, such as the strong-coupling regime with a resonant macroscopic mechanical resonator.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
