-
High-Q cavity coupled to a high permittivity dielectric resonator for sensing applications
Authors:
Shahnam Gorgi Zadeh,
Alberto Ghirri,
Sergio Pagano,
Simone Tocci,
Claudio Gatti,
Antonio Cassinese
Abstract:
The use of high quality factor resonators is of undoubted interest for high precision measurements and for applications in quantum technologies. Novel types of microwave sensors can be realized by coupling a first resonator acting as a stable frequency reference with a second resonator that is sensitive to a particular physical quantity. Here we report on a coupled cavity configuration in which a…
▽ More
The use of high quality factor resonators is of undoubted interest for high precision measurements and for applications in quantum technologies. Novel types of microwave sensors can be realized by coupling a first resonator acting as a stable frequency reference with a second resonator that is sensitive to a particular physical quantity. Here we report on a coupled cavity configuration in which a high $Q$-factor elliptical TESLA-shaped superconducting cavity is coupled with a high permittivity ($\varepsilon_\mathrm{r}$) SrTiO$_3$ puck, whose resonant frequency varies as a function of temperature due to the temperature dependence of the permittivity that reaches values higher than 30000 below 1 K. Extensive electromagnetic simulations are used to test different coupling configurations, showing great versatility to tune the coupling in the weak or strong regime, depending on the puck's position within the cavity. Moreover, for the coupled system, they allow one to investigate the dependence of the zero transmission frequency value on changes of the permittivity $\varepsilon_\mathrm{r}$, obtaining a maximum value of 2.8 MHz per unit change of $\varepsilon_\mathrm{r}$, for $\varepsilon_\mathrm{r} \approx 230$. Finally, we discuss a specific application of the coupled system as a bolometer in different temperature ranges.
△ Less
Submitted 16 January, 2025; v1 submitted 8 October, 2024;
originally announced October 2024.
-
Development of KI-TWPAs for the DARTWARS project
Authors:
Felix Ahrens,
Elena Ferri,
Guerino Avallone,
Carlo Barone,
Matteo Borghesi,
Luca Callegaro,
Giovanni Carapella,
Anna Paola Caricato,
Iacopo Carusotto,
Alessandro Cian,
Alessandro D'Elia,
Daniele Di Gioacchino,
Emanuele Enrico,
Paolo Falferi,
Luca Fasolo,
Marco Faverzani,
Giovanni Filatrella,
Claudio Gatti,
Andrea Giachero,
Damiano Giubertoni,
Veronica Granata,
Claudio Guarcello,
Danilo Labranca,
Angelo Leo,
Carlo Ligi
, et al. (18 additional authors not shown)
Abstract:
Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit…
▽ More
Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit, but due to their narrow bandwidth, only few detectors or qubits per line can be read out in parallel. An alternative and innovative solution is based on superconducting parametric amplification exploiting the travelling-wave concept. Within the DARTWARS (Detector Array Readout with Travelling Wave AmplifieRS) project, we develop Kinetic Inductance Travelling-Wave Parametric Amplifiers (KI-TWPAs) for low temperature detectors and qubit read-out. KI-TWPAs are typically operated in a threewave mixing (3WM) mode and are characterised by a high gain, a high saturation power, a large amplification bandwidth and nearly quantum limited noise performance. The goal of the DARTWARS project is to optimise the KI-TWPA design, explore new materials, and investigate alternative fabrication processes in order to enhance the overall performance of the amplifier. In this contribution we present the advancements made by the DARTWARS collaboration to produce a working prototype of a KI-TWPA, from the fabrication to the characterisation.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Broadband parametric amplification in DARTWARS
Authors:
Marco Faverzani,
Pietro Campana,
Rodolfo Carobene,
Marco Gobbo,
Felix Ahrens,
Guerino Avallone,
Carlo Barone,
Matteo Borghesi,
Silvia Capelli,
Giovanni Carapella,
Anna Paola Caricato,
Luca Callegaro,
Iacopo Carusotto,
Andrea Celotto,
Alessandro Cian,
Alessandro D'Elia,
Daniele Di Gioacchino,
Emanuele Enrico,
Paolo Falferi,
Luca Fasolo,
Elena Ferri,
Giovanni Filatrella,
Claudio Gatti,
Damiano Giubertoni,
Veronica Granata
, et al. (24 additional authors not shown)
Abstract:
Superconducting parametric amplifiers offer the capability to amplify feeble signals with extremely low levels of added noise, potentially reaching quantum-limited amplification. This characteristic makes them essential components in the realm of high-fidelity quantum computing and serves to propel advancements in the field of quantum sensing. In particular, Traveling-Wave Parametric Amplifiers (T…
▽ More
Superconducting parametric amplifiers offer the capability to amplify feeble signals with extremely low levels of added noise, potentially reaching quantum-limited amplification. This characteristic makes them essential components in the realm of high-fidelity quantum computing and serves to propel advancements in the field of quantum sensing. In particular, Traveling-Wave Parametric Amplifiers (TWPAs) may be especially suitable for practical applications due to their multi-Gigahertz amplification bandwidth, a feature lacking in Josephson Parametric Amplifiers (JPAs), despite the latter being a more established technology. This paper presents recent developments of the DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project, focusing on the latest prototypes of Kinetic Inductance TWPAs (KITWPAs). The project aims to develop a KITWPA capable of achieving $20\,$ dB of amplification. To enhance the production yield, the first prototypes were fabricated with half the length and expected gain of the final device. In this paper, we present the results of the characterization of one of the half-length prototypes. The measurements revealed an average amplification of approximately $9\,$dB across a $2\,$GHz bandwidth for a KITWPA spanning $17\,$mm in length.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Design and simulation of a transmon qubit chip for Axion detection
Authors:
Roberto Moretti,
Hervè Atsè Corti,
Danilo Labranca,
Felix Ahrens,
Guerino Avallone,
Danilo Babusci,
Leonardo Banchi,
Carlo Barone,
Matteo Mario Beretta,
Matteo Borghesi,
Bruno Buonomo,
Enrico Calore,
Giovanni Carapella,
Fabio Chiarello,
Alessandro Cian,
Alessando Cidronali,
Filippo Costa,
Alessandro Cuccoli,
Alessandro D'Elia,
Daniele Di Gioacchino,
Stefano Di Pascoli,
Paolo Falferi,
Marco Fanciulli,
Marco Faverzani,
Giulietto Felici
, et al. (32 additional authors not shown)
Abstract:
Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity im…
▽ More
Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity improvements and dark count rate suppression in experiments based on high-precision microwave photon detection, such as for Axions and Dark Photons search. In this context, the INFN Qub-IT project goal is to realize an itinerant single-photon counter based on superconducting qubits that will exploit QND for enhancing Axion search experiments. In this study, we present Qub-IT's status towards the realization of its first superconducting qubit device, illustrating design and simulation procedures and the characterization of fabricated Coplanar Waveguide Resonators (CPWs) for readout. We match target qubit parameters and assess a few-percent level agreement between lumped and distributed element simulation models. We reach a maximum internal quality factor of 9.2x10^5 for -92 dBm on-chip readout power.
△ Less
Submitted 25 January, 2024; v1 submitted 8 October, 2023;
originally announced October 2023.
-
Stepping closer to pulsed single microwave photon detectors for axions search
Authors:
A. D'Elia,
A. Rettaroli,
S. Tocci,
D. Babusci,
C. Barone,
M. Beretta,
B. Buonomo,
F. Chiarello,
N. Chikhi,
D. Di Gioacchino,
G. Felici,
G. Filatrella,
M. Fistul,
L. G. Foggetta,
C. Gatti,
E. Il'ichev,
C. Ligi,
M. Lisitskiy,
G. Maccarrone,
F. Mattioli,
G. Oelsner,
S. Pagano,
L. Piersanti,
B. Ruggiero,
G. Torrioli
, et al. (1 additional authors not shown)
Abstract:
Axions detection requires the ultimate sensitivity down to the single photon limit. In the microwave region this corresponds to energies in the yJ range. This extreme sensitivity has to be combined with an extremely low dark count rate, since the probability of axions conversion into microwave photons is supposed to be very low. To face this complicated task, we followed two promising approaches t…
▽ More
Axions detection requires the ultimate sensitivity down to the single photon limit. In the microwave region this corresponds to energies in the yJ range. This extreme sensitivity has to be combined with an extremely low dark count rate, since the probability of axions conversion into microwave photons is supposed to be very low. To face this complicated task, we followed two promising approaches that both rely on the use of superconducting devices based on the Josephson effect. The first one is to use a single Josephson junction (JJ) as a switching detector (i.e. exploiting the superconducting to normal state transition in presence of microwave photons). We designed a device composed of a coplanar waveguide terminated on a current biased Josephson junction. We tested its efficiency to pulsed (pulse duration 10 ns) microwave signals, since this configuration is closer to an actual axions search experiment. We show how our device is able to reach detection capability of the order of 10 photons with frequency 8 GHz. The second approach is based on an intrinsically quantum device formed by two resonators coupled only via a superconducting qubit network (SQN). This approach relies on quantum nondemolition measurements of the resonator photons. We show that injecting RF power into the resonator, the frequency position of the resonant drop in the transmission coefficient (S21) can be modulated up to 4 MHz. We anticipate that, once optimized, both the devices have the potential to reach single photon sensitivity.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
Progress in the development of a KITWPA for the DARTWARS project
Authors:
M. Borghesi,
C. Barone,
S. Capelli,
G. Carapella,
A. P. Caricato,
I. Carusotto,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
L. Fasolo,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
A. Giachero,
D. Giubertoni,
V. Granata,
A. Greco,
C. Guarcello,
D. Labranca,
A. Leo,
C. Ligi,
G. Maccarrone,
F. Mantegazzini
, et al. (16 additional authors not shown)
Abstract:
DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band). The practical development follows two different promising approaches, one based on the Josephson junctions (TWJPA) and the other one based on the kinetic induc…
▽ More
DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band). The practical development follows two different promising approaches, one based on the Josephson junctions (TWJPA) and the other one based on the kinetic inductance of a high-resistivity superconductor (KITWPA). This paper presents the advancements made by the DARTWARS collaboration to produce a first working prototype of a KITWPA.
△ Less
Submitted 27 October, 2022; v1 submitted 22 August, 2022;
originally announced August 2022.
-
Ultra low noise readout with travelling wave parametric amplifiers: the DARTWARS project
Authors:
A. Rettaroli,
C. Barone,
M. Borghesi,
S. Capelli,
G. Carapella,
A. P. Caricato,
I. Carusotto,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
L. Fasolo,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
A. Giachero,
D. Giubertoni,
V. Granata,
A. Greco,
C. Guarcello,
D. Labranca,
A. Leo,
C. Ligi,
G. Maccarrone
, et al. (16 additional authors not shown)
Abstract:
The DARTWARS project has the goal of developing high-performing innovative travelling wave parametric amplifiers with high gain, large bandwidth, high saturation power, and nearly quantum-limited noise. The target frequency region for its applications is 5 - 10 GHz, with an expected noise temperature of about 600 mK. The development follows two different approaches, one based on Josephson junction…
▽ More
The DARTWARS project has the goal of developing high-performing innovative travelling wave parametric amplifiers with high gain, large bandwidth, high saturation power, and nearly quantum-limited noise. The target frequency region for its applications is 5 - 10 GHz, with an expected noise temperature of about 600 mK. The development follows two different approaches, one based on Josephson junctions and one based on kinetic inductance of superconductors. This contribution mainly focuses on the Josephson travelling wave parametric amplifier, presenting its design, preliminary measurements and the test of homogeneity of arrays of Josephson junctions.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Detector Array Readout with Traveling Wave Amplifiers
Authors:
A. Giachero,
C. Barone,
M. Borghesi,
G. Carapella,
A. P. Caricato,
I. Carusotto,
W. Chang,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
L. Fasolo,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
D. Giubertoni,
A. Greco,
C. Kutlu,
A. Leo,
C. Ligi,
G. Maccarrone,
B. Margesin,
G. Maruccio,
A. Matlashov
, et al. (13 additional authors not shown)
Abstract:
Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures, such as the neutrino mass measurement, the next-generation x-ray observatory, the CMB measurement, the dark matter and axion detection, and the rapid high-fidelity readout of superconducting qubits. The read out sensitivity of arrays of microcalorimeter dete…
▽ More
Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures, such as the neutrino mass measurement, the next-generation x-ray observatory, the CMB measurement, the dark matter and axion detection, and the rapid high-fidelity readout of superconducting qubits. The read out sensitivity of arrays of microcalorimeter detectors, resonant axion-detectors, and qubits, is currently limited by the noise temperature and bandwidth of the cryogenic amplifiers. The DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project has the goal of developing high-performing innovative traveling wave parametric amplifiers (TWPAs) with a high gain, a high saturation power, and a quantum-limited or nearly quantum-limited noise. The practical development follows two different promising approaches, one based on the Josephson junctions and the other one based on the kinetic inductance of a high-resistivity superconductor. In this contribution we present the aims of the project, the adopted design solutions and preliminary results from simulations and measurements.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
