-
Correlating Superconducting Qubit Performance Losses to Sidewall Near-Field Scattering via Terahertz Nanophotonics
Authors:
Richard H. J. Kim,
Samuel J. Haeuser,
Joong-Mok Park,
Randall K. Chan,
Jin-Su Oh,
Thomas Koschny,
Lin Zhou,
Matthew J. Kramer,
Akshay A. Murthy,
Mustafa Bal,
Francesco Crisa,
Sabrina Garattoni,
Shaojiang Zhu,
Andrei Lunin,
David Olaya,
Peter Hopkins,
Alex Romanenko,
Anna Grassellino,
Jigang Wang
Abstract:
Elucidating dielectric losses, structural heterogeneity, and interface imperfections is critical for improving coherence in superconducting qubits. However, most diagnostics rely on destructive electron microscopy or low-throughput millikelvin quantum measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/-spectroscopy of encapsulated niobium transmon qubits, revealing sidewal…
▽ More
Elucidating dielectric losses, structural heterogeneity, and interface imperfections is critical for improving coherence in superconducting qubits. However, most diagnostics rely on destructive electron microscopy or low-throughput millikelvin quantum measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/-spectroscopy of encapsulated niobium transmon qubits, revealing sidewall near-field scattering that correlates with qubit coherence. We further employ a THz hyperspectral line scan to probe dielectric responses and field participation at Al junction interfaces. These findings highlight the promise of THz near-field methods as a high-throughput proxy characterization tool for guiding material selection and optimizing processing protocols to improve qubit and quantum circuit performance.
△ Less
Submitted 5 June, 2025;
originally announced June 2025.
-
Identifying Materials-Level Sources of Performance Variation in Superconducting Transmon Qubits
Authors:
Akshay A. Murthy,
Mustafa Bal,
Michael J. Bedzyk,
Hilal Cansizoglu,
Randall K. Chan,
Venkat Chandrasekhar,
Francesco Crisa,
Amlan Datta,
Yanpei Deng,
Celeo D. Matute Diaz,
Vinayak P. Dravid,
David A. Garcia-Wetten,
Sabrina Garattoni,
Sunil Ghimire,
Dominic P. Goronzy,
Sebastian de Graaf,
Sam Haeuser,
Mark C. Hersam,
Peter Hopkins,
Dieter Isheim,
Kamal Joshi,
Richard Kim,
Saagar Kolachina,
Cameron J. Kopas,
Matthew J. Kramer
, et al. (24 additional authors not shown)
Abstract:
The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying…
▽ More
The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various nondestructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T$_1$ lifetime across different devices. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices, but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values.
△ Less
Submitted 2 June, 2025; v1 submitted 18 March, 2025;
originally announced March 2025.
-
Transmon qubit modeling and characterization for Dark Matter search
Authors:
R. Moretti,
D. Labranca,
P. Campana,
R. Carobene,
M. Gobbo,
M. A. Castellanos-Beltran,
D. Olaya,
P. F. Hopkins,
L. Banchi,
M. Borghesi,
A. Candido,
S. Carrazza,
H. A. Corti,
A. D'Elia,
M. Faverzani,
E. Ferri,
A. Nucciotti,
L. Origo,
A. Pasquale,
A. S. Piedjou Komnang,
A. Rettaroli,
S. Tocci,
C. Gatti,
A. Giachero
Abstract:
This study presents the design, simulation, and experimental characterization of a superconducting transmon qubit circuit prototype for potential applications in dark matter detection experiments. We describe a planar circuit design featuring two non-interacting transmon qubits, one with fixed frequency and the other flux tunable. Finite-element simulations were employed to extract key Hamiltonian…
▽ More
This study presents the design, simulation, and experimental characterization of a superconducting transmon qubit circuit prototype for potential applications in dark matter detection experiments. We describe a planar circuit design featuring two non-interacting transmon qubits, one with fixed frequency and the other flux tunable. Finite-element simulations were employed to extract key Hamiltonian parameters and optimize component geometries. The qubit was fabricated and then characterized at $20$ mK, allowing for a comparison between simulated and measured qubit parameters. Good agreement was found for transition frequencies and anharmonicities (within 1\% and 10\% respectively) while coupling strengths exhibited larger discrepancies (30\%). We discuss potential causes for measured coherence times falling below expectations ($T_1\sim\,$1-2 \textmu s) and propose strategies for future design improvements. Notably, we demonstrate the application of a hybrid 3D-2D simulation approach for energy participation ratio evaluation, yielding a more accurate estimation of dielectric losses. This work represents an important first step in developing planar Quantum Non-Demolition (QND) single-photon counters for dark matter searches, particularly for axion and dark photon detection schemes.
△ Less
Submitted 31 December, 2024; v1 submitted 9 September, 2024;
originally announced September 2024.
-
Single Flux Quantum-Based Digital Control of Superconducting Qubits in a Multi-Chip Module
Authors:
Chuan-Hong Liu,
Andrew Ballard,
David Olaya,
Daniel R. Schmidt,
John Biesecker,
Tammy Lucas,
Joel Ullom,
Shravan Patel,
Owen Rafferty,
Alexander Opremcak,
Kenneth Dodge,
Vito Iaia,
Tianna McBroom,
Jonathan L. Dubois,
Pete F. Hopkins,
Samuel P. Benz,
Britton L. T. Plourde,
Robert McDermott
Abstract:
The single flux quantum (SFQ) digital superconducting logic family has been proposed for the scalable control of next-generation superconducting qubit arrays. In the initial implementation, SFQ-based gate fidelity was limited by quasiparticle (QP) poisoning induced by the dissipative on-chip SFQ driver circuit. In this work, we introduce a multi-chip module architecture to suppress phonon-mediated…
▽ More
The single flux quantum (SFQ) digital superconducting logic family has been proposed for the scalable control of next-generation superconducting qubit arrays. In the initial implementation, SFQ-based gate fidelity was limited by quasiparticle (QP) poisoning induced by the dissipative on-chip SFQ driver circuit. In this work, we introduce a multi-chip module architecture to suppress phonon-mediated QP poisoning. Here, the SFQ elements and qubits are fabricated on separate chips that are joined with In bump bonds. We use interleaved randomized benchmarking to characterize the fidelity of SFQ-based gates, and we demonstrate an error per Clifford gate of 1.2(1)%, an order-of-magnitude reduction over the gate error achieved in the initial realization of SFQ-based qubit control. We use purity benchmarking to quantify the contribution of incoherent error at 0.96(2)%; we attribute this error to photon-mediated QP poisoning mediated by the resonant mm-wave antenna modes of the qubit and SFQ-qubit coupler. We anticipate that a straightforward redesign of the SFQ driver circuit to limit the bandwidth of the SFQ pulses will eliminate this source of infidelity, allowing SFQ-based gates with fidelity approaching theoretical limits, namely 99.9% for resonant sequences and 99.99% for more complex pulse sequences involving variable pulse-to-pulse separation.
△ Less
Submitted 13 January, 2023;
originally announced January 2023.
-
Digital control of a superconducting qubit using a Josephson pulse generator at 3 K
Authors:
L. Howe,
M. Castellanos-Beltran,
A. J. Sirois,
D. Olaya,
J. Biesecker,
P. D. Dresselhaus,
S. P. Benz,
P. F. Hopkins
Abstract:
Scaling of quantum computers to fault-tolerant levels relies critically on the integration of energy-efficient, stable, and reproducible qubit control and readout electronics. In comparison to traditional semiconductor control electronics (TSCE) located at room temperature, the signals generated by Josephson junction (JJ) based rf sources benefit from small device sizes, low power dissipation, int…
▽ More
Scaling of quantum computers to fault-tolerant levels relies critically on the integration of energy-efficient, stable, and reproducible qubit control and readout electronics. In comparison to traditional semiconductor control electronics (TSCE) located at room temperature, the signals generated by Josephson junction (JJ) based rf sources benefit from small device sizes, low power dissipation, intrinsic calibration, superior reproducibility, and insensitivity to ambient fluctuations. Previous experiments to co-locate qubits and JJ-based control electronics resulted in quasiparticle poisoning of the qubit; degrading the qubit's coherence and lifetime. In this paper, we digitally control a 0.01~K transmon qubit with pulses from a Josephson pulse generator (JPG) located at the 3~K stage of a dilution refrigerator. We directly compare the qubit lifetime $T_1$, coherence time $T_2^*$, and thermal occupation $P_{th}$ when the qubit is controlled by the JPG circuit versus the TSCE setup. We find agreement to within the daily fluctuations on $\pm 0.5~μ$s and $\pm 2~μ$s for $T_1$ and $T_2^*$, respectively, and agreement to within the 1\% error for $P_{th}$. Additionally, we perform randomized benchmarking to measure an average JPG gate error of $2.1 \times 10^{-2}$. In combination with a small device size ($<25$~mm$^2$) and low on-chip power dissipation ($\ll 100~μ$W), these results are an important step towards demonstrating the viability of using JJ-based control electronics located at temperature stages higher than the mixing chamber stage in highly-scaled superconducting quantum information systems.
△ Less
Submitted 22 February, 2022; v1 submitted 24 November, 2021;
originally announced November 2021.
