Showing 1–50 of 86 results for author: Mottonen, M

Parameter optimization for the unimon qubit

Authors: Rostislav Duda, Eric Hyyppä, Olli Mukkula, Vasilii Vadimov, Mikko Möttönen

Abstract: Inductively shunted superconducting qubits, such as the unimon qubit, combine high anharmonicity with protection from low-frequency charge noise, positioning them as promising candidates for the implementation of fault-tolerant superconducting quantum computers. In this work, we develop accurate closed-form approximations for the frequency and anharmonicity of the unimon qubit that are also applic… ▽ More Inductively shunted superconducting qubits, such as the unimon qubit, combine high anharmonicity with protection from low-frequency charge noise, positioning them as promising candidates for the implementation of fault-tolerant superconducting quantum computers. In this work, we develop accurate closed-form approximations for the frequency and anharmonicity of the unimon qubit that are also applicable to any single-mode superconducting qubits with a single-well potential profile, such as the quarton qubit or the kinemon qubit. We use these results to theoretically explore the single-qubit gate fidelity and coherence times across the parameter space of qubits with a single-well potential. We find that the gate fidelity can be optimized by tuning the Hamiltonian to $(i)$ a high qubit mode impedance of $1-2$ $kΩ$, $(ii)$ a low qubit frequency of $1$ $GHz$, $(iii)$ and a perfect cancellation of the linear inductance and the Josephson inductance attained at a flux bias of half flux quantum. According to our theoretical analysis, the proposed qubit parameters have potential to enhance the single-qubit gate fidelity of the unimon beyond $99.99\%$ even without significant improvements to the dielectric quality factor or the flux noise density measured for the first unimon qubits. Furthermore, we compare unimon, transmon and fluxonium qubits in terms of their energy spectra and qubit coherence subject to dielectric loss and $1/f$ flux noise in order to highlight the advantages and limitations of each qubit type. △ Less

Submitted 28 April, 2025; originally announced April 2025.

Comments: 14 pages, 5 figures

Dissipation and noise in strongly driven Josephson junctions

Authors: Vasilii Vadimov, Yoshiki Sunada, Mikko Möttönen

Abstract: In circuit quantum electrodynamical systems, the quasiparticle-related losses in Josephson junctions are suppressed due to the gap in the superconducting density of states which is much higher than the typical energy of a microwave photon. In this work, we show that a strong drive even at a frequency lower than twice the superconductor gap parameter can activate dissipation in the junctions due to… ▽ More In circuit quantum electrodynamical systems, the quasiparticle-related losses in Josephson junctions are suppressed due to the gap in the superconducting density of states which is much higher than the typical energy of a microwave photon. In this work, we show that a strong drive even at a frequency lower than twice the superconductor gap parameter can activate dissipation in the junctions due to photon-assisted breaking of the Cooper pairs. Both the decay rate and noise strength associated with the losses are sensitive to the dc phase bias of the junction and can be tuned in a broad range by the amplitude and the frequency of the external driving field, making the suggested mechanism potentially attractive for designing tunable dissipative elements. We also predict pronounced memory effects in the driven Josephson junctions, which are appealing for both theoretical and experimental studies of non-Markovian physics in superconducting quantum circuits. We illustrate our theoretical findings by studying the spectral properties and the steady-state population of a low-impedance resonator coupled to the driven Josephson junction: we show the emergence of non-Lorentzian spectral lines and broad tunability of effective temperature of the steady state. △ Less

Submitted 28 April, 2025; v1 submitted 9 April, 2025; originally announced April 2025.

Comments: 25 pages, 7 figures. Submission to SciPost

Experimental realization of a quantum heat engine based on dissipation-engineered superconducting circuits

Authors: Tuomas Uusnäkki, Timm Mörstedt, Wallace Teixeira, Miika Rasola, Mikko Möttönen

Abstract: Quantum heat engines (QHEs) have attracted long-standing scientific interest, especially inspired by considerations of the interplay between heat and work with the quantization of energy levels, quantum superposition, and entanglement. Operating QHEs calls for effective control of the thermal reservoirs and the eigenenergies of the quantum working medium of the engine. Although superconducting cir… ▽ More Quantum heat engines (QHEs) have attracted long-standing scientific interest, especially inspired by considerations of the interplay between heat and work with the quantization of energy levels, quantum superposition, and entanglement. Operating QHEs calls for effective control of the thermal reservoirs and the eigenenergies of the quantum working medium of the engine. Although superconducting circuits enable accurate engineering of controlled quantum systems, beneficial in quantum computing, this framework has not yet been employed to experimentally realize a cyclic QHE. Here, we experimentally demonstrate a quantum heat engine based on superconducting circuits, using a single-junction quantum-circuit refrigerator (QCR) as a two-way tunable heat reservoir coupled to a flux-tunable transmon qubit acting as the working medium of the engine. We implement a quantum Otto cycle by a tailored drive on the QCR to sequentially induce cooling and heating, interleaved with flux ramps that control the qubit frequency. Utilizing single-shot qubit readout, we monitor the evolution of the qubit state during several cycles of the heat engine and measure positive output powers and efficiencies that agree with our simulations of the quantum evolution. Our results verify theoretical models on the thermodynamics of quantum heat engines and advance the control of dissipation-engineered thermal environments. These proof-of-concept results pave the way for explorations on possible advantages of QHEs with respect to classical heat engines. △ Less

Submitted 27 February, 2025; originally announced February 2025.

Comments: 15 pages, 6 figures

Proposal for an autonomous quantum heat engine

Authors: Miika Rasola, Vasilii Vadimov, Tuomas Uusnäkki, Mikko Möttönen

Abstract: We propose and theoretically analyse a superconducting electric circuit which can be used to experimentally realize an autonomous quantum heat engine. Using a quasiclassical, non-Markovian theoretical model, we demonstrate that coherent microwave power generation can emerge solely from the heat flow through the circuit determined by non-linear circuit quantum electrodynamics. The predicted energy… ▽ More We propose and theoretically analyse a superconducting electric circuit which can be used to experimentally realize an autonomous quantum heat engine. Using a quasiclassical, non-Markovian theoretical model, we demonstrate that coherent microwave power generation can emerge solely from the heat flow through the circuit determined by non-linear circuit quantum electrodynamics. The predicted energy generation rate is sufficiently high for its experimental observation with contemporary techniques, rendering this work a significant step toward the first experimental realization of an autonomous quantum heat engine based on Otto cycles. △ Less

Submitted 28 April, 2025; v1 submitted 12 February, 2025; originally announced February 2025.

Comments: 21 actual pages, 33 altogether. 6 figures

Noise-induced quantum-circuit refrigeration

Authors: Heidi Kivijärvi, Arto Viitanen, Timm Mörstedt, Mikko Möttönen

Abstract: We use a transmon qubit and its dispersively coupled readout resonator to measure the Fock state populations of another microwave resonator, to which we have attached a quantum-circuit refrigerator (QCR). First, we apply noise generated at room temperature to the resonator and show that such noise drive leads to a thermal distribution of the resonator Fock states. Subsequently, we detune the noise… ▽ More We use a transmon qubit and its dispersively coupled readout resonator to measure the Fock state populations of another microwave resonator, to which we have attached a quantum-circuit refrigerator (QCR). First, we apply noise generated at room temperature to the resonator and show that such noise drive leads to a thermal distribution of the resonator Fock states. Subsequently, we detune the noise frequency band far away from the resonance condition and vary the power of the noise applied on the QCR. We observe that such artificial thermal noise may lead to major damping of a coherent state of the resonator. Importantly, we also demonstrate that the effective temperature of a thermal resonator state can be reduced from roughly 300 mK to 130 mK by the introduction of the artificial thermal noise. These observations pave the way for a purely thermally powered quantum-circuit refrigerator which may unlock the use of waste heat in resetting superconducting qubits in a quantum processor and in building autonomous quantum heat engines. △ Less

Submitted 8 December, 2024; originally announced December 2024.

Comments: 8 pages, 5 figures

Multiplexed readout of Superconductor--Normal-Conductor--Superconductor bolometers

Authors: Priyank Singh, András Gunyhó, Heikki Suominen, Giacomo Catto, Florian Blanchet, Qi-Ming Chen, Arman Alizadeh, Aarne Keränen, Jian Ma, Timm Mörstedt, Wei Liu, Mikko Möttonen

Abstract: Recently, ultrasensitive calorimeters have been proposed as a resource-efficient solution for multiplexed qubit readout in superconducting large-scale quantum processors. However, experiments demonstrating frequency multiplexing of these superconductor--normal--conductor--superconductor (SNS) sensors are are lacking in the literature. To this end, we present the design, fabrication, and operation… ▽ More Recently, ultrasensitive calorimeters have been proposed as a resource-efficient solution for multiplexed qubit readout in superconducting large-scale quantum processors. However, experiments demonstrating frequency multiplexing of these superconductor--normal--conductor--superconductor (SNS) sensors are are lacking in the literature. To this end, we present the design, fabrication, and operation of three SNS sensors with frequency-multiplexed input and probe circuits, all on a single chip. These devices have their probe frequencies in the range 150 MHz--200 MHz, which is well detuned from the heater frequencies of 4.4 GHz--7.6 GHz compatible with typical readout frequencies of superconducting qubits. Importantly, we show on-demand triggering of both individual and multiple low-noise SNS bolometers with very low cross talk. These experiments pave the way for multiplexed bolometric characterization and calorimetric readout of multiple qubits, a promising step in minimizing related resources such as the number of readout lines and microwave isolators in large-scale superconducting quantum computers. △ Less

Submitted 11 March, 2025; v1 submitted 19 November, 2024; originally announced November 2024.

Comments: 8 pages, 4 figures

Low-characteristic-impedance superconducting tadpole resonators in the sub-gigahertz regime

Authors: Miika Rasola, Samuel Klaver, Jian Ma, Priyank Singh, Tuomas Uusnäkki, Heikki Suominen, Mikko Möttönen

Abstract: We demonstrate a simple and versatile resonator design based on a short strip of a typical coplanar waveguide shorted at one end to the ground and shunted at the other end with a large parallel-plate capacitor. Due to the shape of the structure, we coin it the tadpole resonator. The design allows tailoring the characteristic impedance of the resonator to especially suit applications requiring low… ▽ More We demonstrate a simple and versatile resonator design based on a short strip of a typical coplanar waveguide shorted at one end to the ground and shunted at the other end with a large parallel-plate capacitor. Due to the shape of the structure, we coin it the tadpole resonator. The design allows tailoring the characteristic impedance of the resonator to especially suit applications requiring low values. We demonstrate characteristic impedances ranging from $Z_c = 2\,Ω$ to $10\,Ω$ and a frequency range from $f_0 = 290\,\mathrm{MHz}$ to $1.1\,\mathrm{GHz}$ while reaching internal quality factors of order $Q_{\mathrm{int}} = 8.5\times 10^3$ translating into a loss tangent of $\tan(δ) = 1.2\times 10^{-4}$ for the aluminium oxide used as the dielectric in the parallel plate capacitor. We conclude that these tadpole resonators are well suited for applications requiring low frequency and low charactersitic impedance while maintaining a small footprint on chip. The low characteristic impedance of the tadpole resonator renders it a promising candidate for achieving strong inductive coupling to other microwave components. △ Less

Submitted 19 November, 2024; v1 submitted 4 September, 2024; originally announced September 2024.

Methods to achieve near-millisecond energy relaxation and dephasing times for a superconducting transmon qubit

Authors: Mikko Tuokkola, Yoshiki Sunada, Heidi Kivijärvi, Jonatan Albanese, Leif Grönberg, Jukka-Pekka Kaikkonen, Visa Vesterinen, Joonas Govenius, Mikko Möttönen

Abstract: Superconducting qubits are one of the most promising physical systems for implementing quantum computers. However, executing quantum algorithms of practical computational advantage requires further improvements in the fidelities of qubit operations, which are currently limited by the energy relaxation and dephasing times of the qubits. Here, we report our measurement results of a high-coherence tr… ▽ More Superconducting qubits are one of the most promising physical systems for implementing quantum computers. However, executing quantum algorithms of practical computational advantage requires further improvements in the fidelities of qubit operations, which are currently limited by the energy relaxation and dephasing times of the qubits. Here, we report our measurement results of a high-coherence transmon qubit with energy relaxation and echo dephasing times surpassing those in the existing literature. We measure a qubit frequency of 2.9 GHz, an energy relaxation time with a median of 425 us and a maximum of (666 +/- 33) us, and an echo dephasing time with a median of 541 us and a maximum of (1057 +/- 138) us. We report in detail our design, fabrication process, and measurement setup to facilitate the reproduction and wide adoption of high-coherence transmon qubits in the academia and industry. △ Less

Submitted 3 February, 2025; v1 submitted 26 July, 2024; originally announced July 2024.

Comments: 16 pages, 12 figures

Correlation measurement of propagating microwave photons at millikelvin

Authors: Aarne Keränen, Qi-Ming Chen, András Gunyhó, Priyank Singh, Jian Ma, Visa Vesterinen, Joonas Govenius, Mikko Möttönen

Abstract: Microwave photons are important carriers of quantum information in many promising platforms for quantum computing. They can be routinely generated, controlled, and teleported in experiments, indicating a variety of applications in quantum technology. However, observation of quantum statistical properties of microwave photons remains demanding: The energy of several microwave photons is considerabl… ▽ More Microwave photons are important carriers of quantum information in many promising platforms for quantum computing. They can be routinely generated, controlled, and teleported in experiments, indicating a variety of applications in quantum technology. However, observation of quantum statistical properties of microwave photons remains demanding: The energy of several microwave photons is considerably smaller than the thermal fluctuation of any room-temperature detector, while amplification necessarily induces noise. Here, we present a measurement technique with a nanobolometer that directly measures the photon statistics at the millikelvin temperature and overcomes this trade-off. We apply our method to thermal states generated by a blackbody radiator operating in the regime of circuit quantum electrodynamics. We demonstrate the photon number resolvedness of the nanobolometer, and reveal the n(n+1)-scaling law of the photon number variance as indicated by the Bose--Einstein distribution. By engineering the coherent and incoherent proportions of the input field, we observe the transition between super-Poissonian and Poissonian statistics of the microwave photons from the bolometric second-order correlation measurement. This technique is poised to serve in fundamental tests of quantum mechanics with microwave photons and function as a scalable readout solution for a quantum information processor. △ Less

Submitted 10 March, 2025; v1 submitted 6 July, 2024; originally announced July 2024.

Autonomous Quantum Heat Engine Based on Non-Markovian Dynamics of an Optomechanical Hamiltonian

Authors: Miika Rasola, Mikko Möttönen

Abstract: We propose a recipe for demonstrating an autonomous quantum heat engine where the working fluid consists of a harmonic oscillator, the frequency of which is tuned by a driving mode. The working fluid is coupled two heat reservoirs each exhibiting a peaked power spectrum, a hot reservoir peaked at a higher frequency than the cold reservoir. Provided that the driving mode is initialized in a coheren… ▽ More We propose a recipe for demonstrating an autonomous quantum heat engine where the working fluid consists of a harmonic oscillator, the frequency of which is tuned by a driving mode. The working fluid is coupled two heat reservoirs each exhibiting a peaked power spectrum, a hot reservoir peaked at a higher frequency than the cold reservoir. Provided that the driving mode is initialized in a coherent state with a high enough amplitude and the parameters of the utilized optomechanical Hamiltonian and the reservoirs are appropriate, the driving mode induces an approximate Otto cycle for the working fluid and consequently its oscillation amplitude begins to increase in time. We build both an analytical and a non-Markovian quasiclassical model for this quantum heat engine and show that reasonably powerful coherent fields can be generated as the output of the quantum heat engine. This general theoretical proposal heralds the in-depth studies of quantum heat engines in the non-Markovian regime. Further, it paves the way for specific physical realizations, such as those in optomechanical systems, and for the subsequent experimental realization of an autonomous quantum heat engine. △ Less

Submitted 8 April, 2024; v1 submitted 27 March, 2024; originally announced March 2024.

Comments: Submitted to Nature Scientific Reports

Rapid on-demand generation of thermal states in superconducting quantum circuits

Authors: Timm Fabian Mörstedt, Wallace Santos Teixeira, Arto Viitanen, Heidi Kivijärvi, Maaria Tiiri, Miika Rasola, Andras Marton Gunyho, Suman Kundu, Louis Lattier, Vasilii Vadimov, Gianluigi Catelani, Vasilii Sevriuk, Johannes Heinsoo, Jukka Räbinä, Joachim Ankerhold, Mikko Möttönen

Abstract: We experimentally demonstrate the fast generation of thermal states of a transmon using a single-junction quantum-circuit refrigerator (QCR) as an in-situ-tunable environment. Through single-shot readout, we monitor the transmon up to its third-excited state, assessing population distributions controlled by QCR drive pulses. Whereas cooling can be achieved in the weak-drive regime, high-amplitude… ▽ More We experimentally demonstrate the fast generation of thermal states of a transmon using a single-junction quantum-circuit refrigerator (QCR) as an in-situ-tunable environment. Through single-shot readout, we monitor the transmon up to its third-excited state, assessing population distributions controlled by QCR drive pulses. Whereas cooling can be achieved in the weak-drive regime, high-amplitude pulses can generate Boltzmann-distributed populations from a temperature of 110 mK up to 500 mK within 100 ns. As we propose in our work, this fast and efficient temperature control provides an appealing opportunity to demonstrate a quantum heat engine. Our results also pave the way for efficient dissipative state preparation and for reducing the circuit depth in thermally assisted quantum algorithms and quantum annealing. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Decay-protected superconducting qubit with fast control enabled by integrated on-chip filters

Authors: Aashish Sah, Suman Kundu, Heikki Suominen, Qiming Chen, Mikko Möttönen

Abstract: Achieving fast gates and long coherence times for superconducting qubits presents challenges, typically requiring either a stronger coupling of the drive line or an excessively strong microwave signal to the qubit. To address this, we introduce on-chip filters of the qubit drive exhibiting a stopband at the qubit frequency, thus enabling long coherence times and strong coupling at the subharmonic… ▽ More Achieving fast gates and long coherence times for superconducting qubits presents challenges, typically requiring either a stronger coupling of the drive line or an excessively strong microwave signal to the qubit. To address this, we introduce on-chip filters of the qubit drive exhibiting a stopband at the qubit frequency, thus enabling long coherence times and strong coupling at the subharmonic frequency, facilitating fast single-qubit gates, and reduced thermal load. The filters exhibit an extrinsic relaxation time of a few seconds while enabling sub-10-ns gates with subharmonic control. Here we show up to 200-fold improvement in the measured relaxation time at the stopband. Furthermore, we implement subharmonic driving of Rabi oscillations with a $π$ pulse duration of 12 ns. Our demonstration of on-chip filters and efficient subharmonic driving in a two-dimensional quantum processor paves the way for a scalable qubit architecture with reduced thermal load and noise from the control line. △ Less

Submitted 16 July, 2024; v1 submitted 13 February, 2024; originally announced February 2024.

Comments: Main document (15 pages, 5 figures), Supplementary material (10 pages, 7 figures, 1 table)

Journal ref: Commun Phys 7, 227 (2024)

Many-excitation removal of a transmon qubit using a single-junction quantum-circuit refrigerator and a two-tone microwave drive

Authors: Wallace Teixeira, Timm Mörstedt, Arto Viitanen, Heidi Kivijärvi, András Gunyhó, Maaria Tiiri, Suman Kundu, Aashish Sah, Vasilii Vadimov, Mikko Möttönen

Abstract: Achieving fast and precise initialization of qubits is a critical requirement for the successful operation of quantum computers. The combination of engineered environments with all-microwave techniques has recently emerged as a promising approach for the reset of superconducting quantum devices. In this work, we experimentally demonstrate the utilization of a single-junction quantum-circuit refrig… ▽ More Achieving fast and precise initialization of qubits is a critical requirement for the successful operation of quantum computers. The combination of engineered environments with all-microwave techniques has recently emerged as a promising approach for the reset of superconducting quantum devices. In this work, we experimentally demonstrate the utilization of a single-junction quantum-circuit refrigerator (QCR) for an expeditious removal of several excitations from a transmon qubit. The QCR is indirectly coupled to the transmon through a resonator in the dispersive regime, constituting a carefully engineered environmental spectrum for the transmon. Using single-shot readout, we observe excitation stabilization times down to roughly $500$ ns, a $20$-fold speedup with QCR and a simultaneous two-tone drive addressing the $e$-$f$ and $f0$-$g1$ transitions of the system. Our results are obtained at a $48$-mK fridge temperature and without postselection, fully capturing the advantage of the protocol for the short-time dynamics and the drive-induced detrimental asymptotic behavior in the presence of relatively hot other baths of the transmon. We validate our results with a detailed Liouvillian model truncated up to the three-excitation subspace, from which we estimate the performance of the protocol in optimized scenarios, such as cold transmon baths and fine-tuned driving frequencies. These results pave the way for optimized reset of quantum-electric devices using engineered environments and for dissipation-engineered state preparation. △ Less

Submitted 16 June, 2024; v1 submitted 26 January, 2024; originally announced January 2024.

Comments: 14 pages, 5 figures

Journal ref: Sci Rep 14, 13755 (2024)

Nonlinear response theory for lossy superconducting quantum circuits

Authors: V. Vadimov, M. Xu, J. T. Stockburger, J. Ankerhold, M. Möttönen

Abstract: We introduce a numerically exact and computationally feasible nonlinear-response theory developed for lossy superconducting quantum circuits based on a framework of quantum dissipation in a minimally extended state space. Starting from the Feynman--Vernon path integral formalism for open quantum systems with the system degrees of freedom being the nonlinear elements of the circuit, we eliminate th… ▽ More We introduce a numerically exact and computationally feasible nonlinear-response theory developed for lossy superconducting quantum circuits based on a framework of quantum dissipation in a minimally extended state space. Starting from the Feynman--Vernon path integral formalism for open quantum systems with the system degrees of freedom being the nonlinear elements of the circuit, we eliminate the temporally non-local influence functional of all linear elements by introducing auxiliary harmonic modes with complex-valued frequencies coupled to the nonlinear elements. In our work, we propose a concept of time-averaged observables, inspired by experiment, and provide an explicit formula for producing their quasiprobability distribution. We illustrate the consistency of our formalism with the well-established Markovian input-output theory by applying them the dispersive readout of a superconducting transmon qubit. For an important demonstration of our approach beyond weak coupling, we analyze the low-frequency linear response of a capacitively and resistively shunted Josephson junction and observe signatures of a much-debated quantum phase transition at a finite temperature. The developed framework enables a comprehensive fully quantum-mechanical treatment of nonlinear quantum circuits coupled to their environment, without the limitations of typical approaches to weak dissipation, high temperature, and weak drive. This versatile tool paves the way for accurate models of quantum devices and increased fundamental understanding of quanutm mechanics such as that of the quantum measurement. △ Less

Submitted 6 March, 2025; v1 submitted 24 October, 2023; originally announced October 2023.

Comments: 34 pages, 10 figures, 4 tables

Multimode physics of the unimon circuit

Authors: Sasu Tuohino, Vasilii Vadimov, Wallace S. Teixeira, Tommi Malmelin, Matti Silveri, Mikko Möttönen

Abstract: We consider a superconducting half-wavelength resonator that is grounded at its both ends and contains a single Josephson junction. Previously this circuit was considered as a unimon qubit in the single-mode approximation where dc-phase-biasing the junction to $π$ leads to increased anharmonicity and 99.9% experimentally observed single-qubit gate fidelity. Inspired by the promising first experime… ▽ More We consider a superconducting half-wavelength resonator that is grounded at its both ends and contains a single Josephson junction. Previously this circuit was considered as a unimon qubit in the single-mode approximation where dc-phase-biasing the junction to $π$ leads to increased anharmonicity and 99.9% experimentally observed single-qubit gate fidelity. Inspired by the promising first experimental results, we develop here a theoretical and numerical model for the detailed understanding of the multimode physics of the unimon circuit. To this end, first, we consider the high-frequency modes of the unimon circuit and find that even though these modes are at their ground state, they imply a significant renormalization to the Josephson energy. We introduce an efficient method how the relevant modes can be fully taken into account and show that unexcited high-lying modes lead to corrections in the qubit energy and anharmonicity. Interestingly, provided that the junction is offset from the middle of the circuit, we find strong cross-Kerr coupling strengths between a few low-lying modes. This observation paves the way for the utilization of the multimode structure, for example, as several qubits embedded into a single unimon circuit. △ Less

Submitted 12 October, 2023; v1 submitted 18 September, 2023; originally announced September 2023.

Quantum-circuit refrigeration of a superconducting microwave resonator well below a single quantum

Authors: Arto Viitanen, Timm Mörstedt, Wallace S. Teixeira, Maaria Tiiri, Jukka Räbinä, Matti Silveri, Mikko Möttönen

Abstract: We experimentally demonstrate a recently proposed single-junction quantum-circuit refrigerator (QCR) as an in-situ-tunable low-temperature environment for a superconducting 4.7-GHz resonator. With the help of a transmon qubit, we measure the populations of the different resonator Fock states, thus providing reliable access to the temperature of the engineered electromagnetic environment and its ef… ▽ More We experimentally demonstrate a recently proposed single-junction quantum-circuit refrigerator (QCR) as an in-situ-tunable low-temperature environment for a superconducting 4.7-GHz resonator. With the help of a transmon qubit, we measure the populations of the different resonator Fock states, thus providing reliable access to the temperature of the engineered electromagnetic environment and its effect on the resonator. We demonstrate coherent and thermal resonator states and that the on-demand dissipation provided by the QCR can drive these to a small fraction of a photon on average, even if starting above 1 K. We observe that the QCR can be operated either with a dc bias voltage or a gigahertz rf drive, or a combination of these. The bandwidth of the rf drive is not limited by the circuit itself and consequently, we show that 2.9-GHz continuous and 10-ns-pulsed drives lead to identical desired refrigeration of the resonator. These observations answer to the shortcomings of previous works where the Fock states were not resolvable and the QCR exhibited slow charging dynamics. Thus this work introduces a versatile tool to study open quantum systems, quantum thermodynamics, and to quickly reset superconducting qubits. △ Less

Submitted 1 August, 2023; originally announced August 2023.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. Research 6, 023262 (2024)

Compact inductor-capacitor resonators at sub-gigahertz frequencies

Authors: Qi-Ming Chen, Priyank Singh, Rostislav Duda, Giacomo Catto, Aarne Keränen, Arman Alizadeh, Timm Mörstedt, Aashish Sah, András Gunyhó, Wei Liu, Mikko Möttönen

Abstract: Compact inductor-capacitor (LC) resonators, in contrast to coplanar waveguide (CPW) resonators, have a simple lumped-element circuit representation but usually call for sophisticated finite-element method (FEM) simulations for an accurate modelling. Here we present an simple analytical model for a family of coplanar LC resonators where the electrical properties are directly obtained from the circu… ▽ More Compact inductor-capacitor (LC) resonators, in contrast to coplanar waveguide (CPW) resonators, have a simple lumped-element circuit representation but usually call for sophisticated finite-element method (FEM) simulations for an accurate modelling. Here we present an simple analytical model for a family of coplanar LC resonators where the electrical properties are directly obtained from the circuit geometry with a satisfying accuracy. Our experimental results on $10$ high-internal-quality-factor resonators ($Q_{\rm i}\gtrsim 2\times 10^{5}$), with frequency ranging roughly from $300\,{\rm MHz}$ to $1\,{\rm GHz}$, show an excellent consistency with both the derived analytical model and detailed FEM simulations. These results showcase the ability to design sub-gigahertz resonators with less than $2\%$ deviation in the resonance frequency, which has immediate applications, for example, in the implementation of ultrasensitive cryogenic detectors. The achieved compact resonator size of the order of a square millimeter indicates a feasible way to integrate hundreds of microwave resonators on a single chip for realizing photonic lattices. △ Less

Submitted 25 April, 2023; originally announced April 2023.

Single-Shot Readout of a Superconducting Qubit Using a Thermal Detector

Authors: András M. Gunyhó, Suman Kundu, Jian Ma, Wei Liu, Sakari Niemelä, Giacomo Catto, Vasilii Vadimov, Visa Vesterinen, Priyank Singh, Qiming Chen, Mikko Möttönen

Abstract: Measuring the state of qubits is one of the fundamental operations of a quantum computer. Currently, state-of-the-art high-fidelity single-shot readout of superconducting qubits relies on parametric amplifiers at the millikelvin stage. However, parametric amplifiers are challenging to scale beyond hundreds of qubits owing to practical size and power limitations. Nanobolometers have a multitude of… ▽ More Measuring the state of qubits is one of the fundamental operations of a quantum computer. Currently, state-of-the-art high-fidelity single-shot readout of superconducting qubits relies on parametric amplifiers at the millikelvin stage. However, parametric amplifiers are challenging to scale beyond hundreds of qubits owing to practical size and power limitations. Nanobolometers have a multitude of properties that are advantageous for scalability and have recently shown sensitivity and speed promising for qubit readout, but such thermal detectors have not been demonstrated for this purpose. In this work, we utilize an ultrasensitive bolometer in place of a parametric amplifier to experimentally demonstrate single-shot qubit readout. With a readout duration of $13.9~μ\mathrm{s}$, we achieve a single-shot fidelity of 0.618 which is mainly limited by the energy relaxation time of the qubit, $T_1 = 28~μ\mathrm{s}$. Without the $T_1$ errors, we find the fidelity to be 0.927. In the future, high-fidelity single-shot readout may be achieved by straightforward improvements to the chip design and experimental setup, and perhaps most interestingly by the change of the bolometer absorber material to reduce the readout time to the hundred-nanosecond level and beyond. △ Less

Submitted 13 April, 2023; v1 submitted 7 March, 2023; originally announced March 2023.

Comments: 14 pages, 6 figures

Exceptional-point-assisted entanglement, squeezing, and reset in a chain of three superconducting resonators

Authors: Wallace S. Teixeira, Vasilii Vadimov, Timm Mörstedt, Suman Kundu, Mikko Möttönen

Abstract: The interplay between coherent and dissipative dynamics required in various control protocols of quantum technology has motivated studies of open-system degeneracies, referred to as exceptional points (EPs). Here, we introduce a scheme for fast quantum-state synthesis using exceptional-point engineering in a lossy chain of three superconducting resonators. We theoretically find that the rich physi… ▽ More The interplay between coherent and dissipative dynamics required in various control protocols of quantum technology has motivated studies of open-system degeneracies, referred to as exceptional points (EPs). Here, we introduce a scheme for fast quantum-state synthesis using exceptional-point engineering in a lossy chain of three superconducting resonators. We theoretically find that the rich physics of EPs can be used to identify regions in the parameter space that favor a fast and quasi-stable transfer of squeezing and entanglement, or a fast reset of the system. For weakly interacting resonators with the coupling strength $g$, the obtained quasi-stabilization time scales are identified as $1/(2\sqrt{2}g)$, and reset infidelities below $10^{-5}$ are obtained with a waiting time of roughly $6/g$ in the case of weakly squeezed resonators. Our results shed light on the role of EPs in multimode Gaussian systems and pave the way for optimized distribution of squeezing and entanglement between different nodes of a photonic network using dissipation as a resource. △ Less

Submitted 22 August, 2023; v1 submitted 31 January, 2023; originally announced January 2023.

Comments: 14 pages, 6 figures

Journal ref: Phys. Rev. Research 5, 033119 (2023)

Quantum error correction under numerically exact open-quantum-system dynamics

Authors: Aravind Plathanam Babu, Tuure Orell, Vasilii Vadimov, Wallace Teixeira, Mikko Möttönen, Matti Silveri

Abstract: The known quantum error-correcting codes are typically built on approximative open-quantum-system models such as Born--Markov master equations. However, it is an open question how such codes perform in actual physical systems that, to some extent, necessarily exhibit phenomena beyond the limits of these models. To this end, we employ numerically exact open-quantum-system dynamics to analyze the pe… ▽ More The known quantum error-correcting codes are typically built on approximative open-quantum-system models such as Born--Markov master equations. However, it is an open question how such codes perform in actual physical systems that, to some extent, necessarily exhibit phenomena beyond the limits of these models. To this end, we employ numerically exact open-quantum-system dynamics to analyze the performance of a five-qubit error correction code where each qubit is coupled to its own bath. We first focus on the performance of a single error correction cycle covering time scales beyond that of Born--Markov models. Namely, we observe distinct power law behavior of the channel infidelity $\propto t^{2a}$: $a\lesssim 2$ in the ultrashort times $t<3/ω_{\rm c}$ and $a\approx 1/2$ in the short-time range $3/ω_{\rm c}<t<30/ω_{\rm c}$, where $ω_{\rm c}$ is the cutoff angular frequency of the bath. Importantly, the five-qubit quantum-error correction code suppresses all single errors, including those arising from the ultrashort and short-time evolution, which are peculiar to the exact evolution. Interestingly, we demonstrate the breaking points of the five-qubit error correction code and the Born--Markov models for repeated error correction when the repetition rate exceeds $2π/ω$ or the coupling strength $κ\gtrsim 0.1 ω$, where $ω$ is the angular frequency of the qubit. Our results pave the way for applying numerically exact open-quantum-system models for the studies of QECs beyond simple error models. △ Less

Submitted 15 December, 2022; originally announced December 2022.

Report number: 043161

Journal ref: Phys. Rev. Research 5, 043161(2023)

Initial experimental results on a superconducting-qubit reset based on photon-assisted quasiparticle tunneling

Authors: V. A. Sevriuk, W. Liu, J. Rönkkö, H. Hsu, F. Marxer, T. F. Mörstedt, M. Partanen, J. Räbinä, M. Venkatesh, J. Hotari, L. Grönberg, J. Heinsoo, T. Li, J. Tuorila, K. W. Chan, J. Hassel, K. Y. Tan, M. Möttönen

Abstract: We present here our recent results on qubit reset scheme based on a quantum-circuit refrigerator (QCR). In particular, we use the photon-assisted quasiparticle tunneling through a superconductor--insulator--normal-metal--insulator--superconductor junction to controllably decrease the energy relaxation time of the qubit during the QCR operation. In our experiment, we use a transmon qubit with dispe… ▽ More We present here our recent results on qubit reset scheme based on a quantum-circuit refrigerator (QCR). In particular, we use the photon-assisted quasiparticle tunneling through a superconductor--insulator--normal-metal--insulator--superconductor junction to controllably decrease the energy relaxation time of the qubit during the QCR operation. In our experiment, we use a transmon qubit with dispersive readout. The QCR is capacitively coupled to the qubit through its normal-metal island. We employ rapid, square-shaped QCR control voltage pulses with durations in the range of 2--350 ns and a variety of amplitudes to optimize the reset time and fidelity. Consequently, we reach a qubit ground-state probability of roughly 97% with 80-ns pulses starting from the first excited state. The qubit state probability is extracted from averaged readout signal, where the calibration is based of the Rabi oscillations, thus not distinguishing the residual thermal population of the qubit. △ Less

Submitted 2 December, 2022; originally announced December 2022.

Journal ref: Appl. Phys. Lett. 121, 234002 (2022)

Long-distance transmon coupler with CZ gate fidelity above $99.8\%$

Authors: Fabian Marxer, Antti Vepsäläinen, Shan W. Jolin, Jani Tuorila, Alessandro Landra, Caspar Ockeloen-Korppi, Wei Liu, Olli Ahonen, Adrian Auer, Lucien Belzane, Ville Bergholm, Chun Fai Chan, Kok Wai Chan, Tuukka Hiltunen, Juho Hotari, Eric Hyyppä, Joni Ikonen, David Janzso, Miikka Koistinen, Janne Kotilahti, Tianyi Li, Jyrgen Luus, Miha Papic, Matti Partanen, Jukka Räbinä , et al. (14 additional authors not shown)

Abstract: Tunable coupling of superconducting qubits has been widely studied due to its importance for isolated gate operations in scalable quantum processor architectures. Here, we demonstrate a tunable qubit-qubit coupler based on a floating transmon device which allows us to place qubits at least 2 mm apart from each other while maintaining over 50 MHz coupling between the coupler and the qubits. In the… ▽ More Tunable coupling of superconducting qubits has been widely studied due to its importance for isolated gate operations in scalable quantum processor architectures. Here, we demonstrate a tunable qubit-qubit coupler based on a floating transmon device which allows us to place qubits at least 2 mm apart from each other while maintaining over 50 MHz coupling between the coupler and the qubits. In the introduced tunable-coupler design, both the qubit-qubit and the qubit-coupler couplings are mediated by two waveguides instead of relying on direct capacitive couplings between the components, reducing the impact of the qubit-qubit distance on the couplings. This leaves space for each qubit to have an individual readout resonator and a Purcell filter needed for fast high-fidelity readout. In addition, the large qubit-qubit distance reduces unwanted non-nearest neighbor coupling and allows multiple control lines to cross over the structure with minimal crosstalk. Using the proposed flexible and scalable architecture, we demonstrate a controlled-$Z$ gate with $(99.81 \pm 0.02)\%$ fidelity. △ Less

Submitted 19 December, 2022; v1 submitted 19 August, 2022; originally announced August 2022.

Comments: 24 pages, 12 figures, Figure 1 updated, Appendix A extended

Journal ref: PRX Quantum 4, 010314 (2023)

Propagating Quantum Microwaves: Towards Applications in Communication and Sensing

Authors: Mateo Casariego, Emmanuel Zambrini Cruzeiro, Stefano Gherardini, Tasio Gonzalez-Raya, Rui André, Gonçalo Frazão, Giacomo Catto, Mikko Möttönen, Debopam Datta, Klaara Viisanen, Joonas Govenius, Mika Prunnila, Kimmo Tuominen, Maximilian Reichert, Michael Renger, Kirill G. Fedorov, Frank Deppe, Harriet van der Vliet, A. J. Matthews, Yolanda Fernández, R. Assouly, R. Dassonneville, B. Huard, Mikel Sanz, Yasser Omar

Abstract: The field of propagating quantum microwaves has started to receive considerable attention in the past few years. Motivated at first by the lack of an efficient microwave-to-optical platform that could solve the issue of secure communication between remote superconducting chips, current efforts are starting to reach other areas, from quantum communications to sensing. Here, we attempt at giving a s… ▽ More The field of propagating quantum microwaves has started to receive considerable attention in the past few years. Motivated at first by the lack of an efficient microwave-to-optical platform that could solve the issue of secure communication between remote superconducting chips, current efforts are starting to reach other areas, from quantum communications to sensing. Here, we attempt at giving a state-of-the-art view of the two, pointing at some of the technical and theoretical challenges we need to address, and while providing some novel ideas and directions for future research. Hence, the goal of this paper is to provide a bigger picture, and -- we hope -- to inspire new ideas in quantum communications and sensing: from open-air microwave quantum key distribution to direct detection of dark matter, we expect that the recent efforts and results in quantum microwaves will soon attract a wider audience, not only in the academic community, but also in an industrial environment. △ Less

Submitted 23 May, 2022; originally announced May 2022.

Journal ref: Quantum Sci. Technol. 8 (2), 023001 (2023)

Open-Air Microwave Entanglement Distribution for Quantum Teleportation

Authors: Tasio Gonzalez-Raya, Mateo Casariego, Florian Fesquet, Michael Renger, Vahid Salari, Mikko Möttönen, Yasser Omar, Frank Deppe, Kirill G. Fedorov, Mikel Sanz

Abstract: Microwave technology plays a central role in current wireless communications, standing among them mobile communication and local area networks (LANs). The microwave range shows relevant advantages with respect to other frequencies in open-air transmission, such as low absorption losses and low energy consumption, and it is additionally the natural working frequency in superconducting quantum techn… ▽ More Microwave technology plays a central role in current wireless communications, standing among them mobile communication and local area networks (LANs). The microwave range shows relevant advantages with respect to other frequencies in open-air transmission, such as low absorption losses and low energy consumption, and it is additionally the natural working frequency in superconducting quantum technologies. Entanglement distribution between separate parties is at the core of secure quantum communications. Therefore, understanding its limitations in realistic open-air settings, specially in the rather unexplored microwave regime, is crucial for transforming microwave quantum communications into a mainstream technology. Here, we investigate the feasibility of an open-air entanglement distribution scheme with microwave two-mode squeezed states. First, we study the reach of direct entanglement transmission in open-air, obtaining a maximum distance of approximately 500 meters in a realistic setting with state-of-the-art experimental parameters. Afterwards, we adapt entanglement distillation and entanglement swapping protocols to microwave technology in order to reduce environmental entanglement degradation. While entanglement distillation helps to increase quantum correlations in the short-distance low-squeezing regime by up to $46\%$, entanglement swapping increases the reach by $14\%$. Then, we compute the fidelity of a continuous-variable quantum teleportation protocol using open-air-distributed entanglement as a resource. Finally, we adapt the machinery to explore the limitations of quantum communication between satellites, where the thermal noise impact is substantially reduced and diffraction losses are dominant. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Journal ref: Phys. Rev. Applied 18, 044002 (2022)

Unimon qubit

Authors: Eric Hyyppä, Suman Kundu, Chun Fai Chan, András Gunyhó, Juho Hotari, David Janzso, Kristinn Juliusson, Olavi Kiuru, Janne Kotilahti, Alessandro Landra, Wei Liu, Fabian Marxer, Akseli Mäkinen, Jean-Luc Orgiazzi, Mario Palma, Mykhailo Savytskyi, Francesca Tosto, Jani Tuorila, Vasilii Vadimov, Tianyi Li, Caspar Ockeloen-Korppi, Johannes Heinsoo, Kuan Yen Tan, Juha Hassel, Mikko Möttönen

Abstract: Superconducting qubits are one of the most promising candidates to implement quantum computers. The superiority of superconducting quantum computers over any classical device in simulating random but well-determined quantum circuits has already been shown in two independent experiments and important steps have been taken in quantum error correction. However, the currently wide-spread qubit designs… ▽ More Superconducting qubits are one of the most promising candidates to implement quantum computers. The superiority of superconducting quantum computers over any classical device in simulating random but well-determined quantum circuits has already been shown in two independent experiments and important steps have been taken in quantum error correction. However, the currently wide-spread qubit designs do not yet provide high enough performance to enable practical applications or efficient scaling of logical qubits owing to one or several following issues: sensitivity to charge or flux noise leading to decoherence, too weak non-linearity preventing fast operations, undesirably dense excitation spectrum, or complicated design vulnerable to parasitic capacitance. Here, we introduce and demonstrate a superconducting-qubit type, the unimon, which combines the desired properties of high non-linearity, full insensitivity to dc charge noise, insensitivity to flux noise, and a simple structure consisting only of a single Josephson junction in a resonator. We measure the qubit frequency, $ω_{01}/(2π)$, and anharmonicity $α$ over the full dc-flux range and observe, in agreement with our quantum models, that the qubit anharmonicity is greatly enhanced at the optimal operation point, yielding, for example, 99.9% and 99.8% fidelity for 13-ns single-qubit gates on two qubits with $(ω_{01},α)=(4.49~\mathrm{GHz}, 434~\mathrm{ MHz})\times 2π$ and $(3.55~\mathrm{GHz}, 744~\mathrm{ MHz})\times 2π$, respectively. The energy relaxation time $T_1\lesssim 10~μ\mathrm{s}$ is stable for hours and seems to be limited by dielectric losses. Thus, future improvements of the design, materials, and gate time may promote the unimon to break the 99.99% fidelity target for efficient quantum error correction and possible quantum advantage with noisy systems. △ Less

Submitted 5 April, 2022; v1 submitted 11 March, 2022; originally announced March 2022.

Comments: Main text: 37 pages,10 figures, 3 tables. Supplementary: 34 pages, 8 figure, 1 table

Efficient classical simulation of open bosonic quantum systems

Authors: Akseli Mäkinen, Joni Ikonen, Takaaki Aoki, Jani Tuorila, Yuichiro Matsuzaki, Mikko Möttönen

Abstract: We propose a computationally efficient method to solve the dynamics of operators of bosonic quantum systems coupled to their environments. The method maps the operator under interest to a set of complex-valued functions, and its adjoint master equation to a set of partial differential equations for these functions, which are subsequently solved numerically. In the limit of weak coupling to the env… ▽ More We propose a computationally efficient method to solve the dynamics of operators of bosonic quantum systems coupled to their environments. The method maps the operator under interest to a set of complex-valued functions, and its adjoint master equation to a set of partial differential equations for these functions, which are subsequently solved numerically. In the limit of weak coupling to the environment, the mapping of the operator enables storing the operator efficiently during the simulation, leading to approximately quadratic improvement in the memory consumption compared with the direct approach of solving the adjoint master equation in the number basis, while retaining the computation time comparable. Moreover, the method enables efficient parallelization which allows to optimize for the actual computational time to reach an approximately quadratic speed up, while retaining the memory consumption comparable to the direct approach. We foresee the method to prove useful, e.g., for the verification of the operation of superconducting quantum processors. △ Less

Submitted 11 March, 2022; v1 submitted 10 March, 2022; originally announced March 2022.

Comments: 14 pages, 2 figures

Recent Developments in Quantum-Circuit Refrigeration

Authors: Timm Fabian Mörstedt, Arto Viitanen, Vasilii Vadimov, Vasilii Sevriuk, Matti Partanen, Eric Hyyppä, Gianluigi Catelani, Matti Silveri, Kuan Yen Tan, Mikko Möttönen

Abstract: We review the recent progress in direct active cooling of the quantum-electric degrees freedom in engineered circuits, or quantum-circuit refrigeration. In 2017, the invention of a quantum-circuit refrigerator (QCR) based on photon-assisted tunneling of quasiparticles through a normal-metal--insulator--superconductor junction inspired a series of experimental studies demonstrating the following ma… ▽ More We review the recent progress in direct active cooling of the quantum-electric degrees freedom in engineered circuits, or quantum-circuit refrigeration. In 2017, the invention of a quantum-circuit refrigerator (QCR) based on photon-assisted tunneling of quasiparticles through a normal-metal--insulator--superconductor junction inspired a series of experimental studies demonstrating the following main properties: (i) the direct-current (dc) bias voltage of the junction can change the QCR-induced damping rate of a superconducting microwave resonator by orders of magnitude and give rise to non-trivial Lamb shifts, (ii) the damping rate can be controlled in nanosecond time scales, and (iii) the dc bias can be replaced by a microwave excitation, the amplitude of which controls the induced damping rate. Theoretically, it is predicted that state-of-the-art superconducting resonators and qubits can be reset with an infidelity lower than $10^{-4}$ in tens of nanoseconds using experimentally feasible parameters. A QCR-equipped resonator has also been demonstrated as an incoherent photon source with an output temperature above one kelvin yet operating at millikelvin. This source has been used to calibrate cryogenic amplification chains. In the future, the QCR may be experimentally used to quickly reset superconducting qubits, and hence assist in the great challenge of building a practical quantum computer. △ Less

Submitted 22 November, 2021; originally announced November 2021.

Comments: 14 pages, 9 figures, submitted to Annalen der Physik (AdP) 19.11.2021

Journal ref: Annalen der Physik 534, 2100543 (2022)

Charge dynamics in quantum-circuit refrigeration: thermalization and microwave gain

Authors: Hao Hsu, Matti Silveri, Vasilii Sevriuk, Mikko Möttönen, Gianluigi Catelani

Abstract: Previous studies of photon-assisted tunneling through normal-metal-insulator-superconductor junctions have exhibited potential for providing a convenient tool to control the dissipation of quantum-electric circuits in-situ. However, the current literature on such a quantum-circuit refrigerator (QCR) does not present a detailed description for the charge dynamics of the tunneling processes or the p… ▽ More Previous studies of photon-assisted tunneling through normal-metal-insulator-superconductor junctions have exhibited potential for providing a convenient tool to control the dissipation of quantum-electric circuits in-situ. However, the current literature on such a quantum-circuit refrigerator (QCR) does not present a detailed description for the charge dynamics of the tunneling processes or the phase coherence of the open quantum system. Here we derive a master equation describing both quantum-electric and charge degrees of freedom, and discover that typical experimental parameters of low temperature and yet lower charging energy yield a separation of time scales for the charge and quantum dynamics. Consequently, the minor effect of the different charge states can be taken into account by averaging over the charge distribution. We also consider applying an ac voltage to the tunnel junction, which enables control of the decay rate of a superconducting qubit over four orders of magnitude by changing the drive amplitude; we find an order-of-magnitude drop in the qubit excitation in 40 ns and a residual reset infidelity below $10^{-4}$. Furthermore, for the normal island we consider the case of charging energy and single-particle level spacing large compared to the superconducting gap, i.e., a quantum dot. Although the decay rates arising from such a dot QCR appear low for use in qubit reset, the device can provide effective negative damping (gain) to the coupled microwave resonator. The Fano factor of such a millikelvin microwave source may be smaller than unity, with the latter value being reached close to the maximum attainable power. △ Less

Submitted 9 July, 2021; originally announced July 2021.

Comments: 20 pages, 10 figures

Journal ref: AVS Quantum Sci. 3, 042001 (2021)

A low-noise on-chip coherent microwave source

Authors: Chengyu Yan, Juha Hassel, Visa Vesterinen, Jinli Zhang, Joni Ikonen, Leif Grönberg, Jan Goetz, Mikko Möttönen

Abstract: The scaleup of quantum computers operating in the microwave domain requires advanced control electronics, and the use of integrated components that operate at the temperature of the quantum devices is potentially beneficial. However, such an approach requires ultra-low power dissipation and high signal quality in order to ensure quantum-coherent operations. Here, we report an on-chip device that i… ▽ More The scaleup of quantum computers operating in the microwave domain requires advanced control electronics, and the use of integrated components that operate at the temperature of the quantum devices is potentially beneficial. However, such an approach requires ultra-low power dissipation and high signal quality in order to ensure quantum-coherent operations. Here, we report an on-chip device that is based on a Josephson junction coupled to a spiral resonator and is capable of coherent continuous-wave microwave emission. We show that characteristics of the device accurately follow a theory based on a perturbative treatment of the capacitively shunted Josephson junction as a gain element. The infidelity of typical quantum gate operations due to the phase noise of this cryogenic 25-pW microwave source is less than 0.1% up to 10-ms evolution times, which is below the infidelity caused by dephasing in state-of-the-art superconducting qubits. Together with future cryogenic amplitude and phase modulation techniques, our approach may lead to scalable cryogenic control systems for quantum processors. △ Less

Submitted 23 November, 2021; v1 submitted 12 March, 2021; originally announced March 2021.

Journal ref: Nature Electronics (2021)

Assessment of weak-coupling approximations on a driven two-level system under dissipation

Authors: Wallace S. Teixeira, Fernando L. Semião, Jani Tuorila, Mikko Möttönen

Abstract: The standard weak-coupling approximations associated to open quantum systems have been extensively used in the description of a two-level quantum system, qubit, subjected to relatively weak dissipation compared with the qubit frequency. However, recent progress in the experimental implementations of controlled quantum systems with increased levels of on-demand engineered dissipation has motivated… ▽ More The standard weak-coupling approximations associated to open quantum systems have been extensively used in the description of a two-level quantum system, qubit, subjected to relatively weak dissipation compared with the qubit frequency. However, recent progress in the experimental implementations of controlled quantum systems with increased levels of on-demand engineered dissipation has motivated precision studies in parameter regimes that question the validity of the approximations, especially in the presence of time-dependent drive fields. In this paper, we address the precision of weak-coupling approximations by studying a driven qubit through the numerically exact and non-perturbative method known as the stochastic Liouville-von Neumann equation with dissipation. By considering weak drive fields and a cold Ohmic environment with a high cutoff frequency, we use the Markovian Lindblad master equation as a point of comparison for the SLED method and study the influence of the bath-induced energy shift on the qubit dynamics. We also propose a metric that may be used in experiments to map the regime of validity of the Lindblad equation in predicting the steady state of the driven qubit. In addition, we study signatures of the well-known Mollow triplet and observe its meltdown owing to dissipation in an experimentally feasible parameter regime of circuit electrodynamics. Besides shedding light on the practical limitations of the Lindblad equation, we expect our results to inspire future experimental research on engineered open quantum systems, the accurate modeling of which may benefit from non-perturbative methods. △ Less

Submitted 31 January, 2022; v1 submitted 11 November, 2020; originally announced November 2020.

Comments: 32 pages, 5 figures, modified version published in New Journal of Physics

Journal ref: New J. Phys. 24, 013005 (2022)

Validity of Born-Markov master equations for single and two-qubit systems

Authors: Vasilii Vadimov, Jani Tuorila, Tuure Orell, Jürgen Stockburger, Tapio Ala-Nissila, Joachim Ankerhold, Mikko Möttönen

Abstract: The urgent need for reliable simulation tools to match the extreme accuracy needed to control tailored quantum devices highlights the importance of understanding open quantum systems and their modeling. To this end, we compare here the commonly used Redfield and Lindblad master equations against numerically exact results in the case of one and two resonant qubits transversely coupled at a single p… ▽ More The urgent need for reliable simulation tools to match the extreme accuracy needed to control tailored quantum devices highlights the importance of understanding open quantum systems and their modeling. To this end, we compare here the commonly used Redfield and Lindblad master equations against numerically exact results in the case of one and two resonant qubits transversely coupled at a single point to a Drude-cut ohmic bath. All the relevant parameters are varied over a broad range which allows us to give detailed predictions about the validity and physically meaningful applicability of the weak-coupling approaches. We characterize the accuracy of the approximate approaches by comparing the maximum difference of their system evolution superoperators with numerically exact results. After optimizing the parameters of the approximate models to minimize the difference, we also explore if and to what extent the weak-coupling equations can be applied at least as phenomenological models. Optimization may lead to an accurate reproduction of experimental data, but yet our results are important to estimate the reliability of the extracted parameter values such as the bath temperature. Our findings set general guidelines for the range of validity of the usual Born-Markov master equations and indicate that they fail to accurately describe the physics in surprisingly broad range of parameters, in particular at low temperatures. Since quantum-technological devices operate there their accurate modeling calls for a careful choice of methods. △ Less

Submitted 10 November, 2020; originally announced November 2020.

Journal ref: Phys. Rev. B 103, 214308 (2021)

Photon-number-dependent effective Lamb shift

Authors: Arto Viitanen, Matti Silveri, Máté Jenei, Vasilii Sevriuk, Kuan Yen Tan, Matti Partanen, Jan Goetz, Leif Grönberg, Vasilii Vadimov, Valtteri Lahtinen, Mikko Möttönen

Abstract: The Lamb shift, an energy shift arising from the presence of the electromagnetic vacuum, has been observed in various quantum systems and established as the part of the energy shift independent of the environmental photon number. However, typical studies are based on simplistic bosonic models which may be challenged in practical quantum devices. We demonstrate a hybrid bosonic-fermionic environmen… ▽ More The Lamb shift, an energy shift arising from the presence of the electromagnetic vacuum, has been observed in various quantum systems and established as the part of the energy shift independent of the environmental photon number. However, typical studies are based on simplistic bosonic models which may be challenged in practical quantum devices. We demonstrate a hybrid bosonic-fermionic environment for a linear resonator mode and observe that the photon number in the environment can dramatically increase both the dissipation and the effective Lamb shift of the mode. Our observations are quantitatively described by a first-principles model which we develop here also to guide device design for future quantum-technological applications. The device demonstrated here can be utilized as a fully rf-operated quantum-circuit refrigerator to quickly reset superconducting qubits. △ Less

Submitted 4 August, 2021; v1 submitted 19 August, 2020; originally announced August 2020.

Comments: 15 pages, 10 figures

Journal ref: Phys. Rev. Research 3, 033126 (2021)

Bolometer operating at the threshold for circuit quantum electrodynamics

Authors: R. Kokkoniemi, J. -P. Girard, D. Hazra, A. Laitinen, J. Govenius, R. E. Lake, I. Sallinen, V. Vesterinen, P. Hakonen, M. Möttönen

Abstract: Radiation sensors based on the heating effect of the absorbed radiation are typically relatively simple to operate and flexible in terms of the input frequency. Consequently, they are widely applied, for example, in gas detection, security, THz imaging, astrophysical observations, and medical applications. A new spectrum of important applications is currently emerging from quantum technology and e… ▽ More Radiation sensors based on the heating effect of the absorbed radiation are typically relatively simple to operate and flexible in terms of the input frequency. Consequently, they are widely applied, for example, in gas detection, security, THz imaging, astrophysical observations, and medical applications. A new spectrum of important applications is currently emerging from quantum technology and especially from electrical circuits behaving quantum mechanically. This circuit quantum electrodynamics (cQED) has given rise to unprecedented single-photon detectors and a quantum computer supreme to the classical supercomputers in a certain task. Thermal sensors are appealing in enhancing these devices since they are not plagued by quantum noise and are smaller, simpler, and consume about six orders of magnitude less power than the commonly used traveling-wave parametric amplifiers. However, despite great progress in the speed and noise levels of thermal sensors, no bolometer to date has proven fast and sensitive enough to provide advantages in cQED. Here, we experimentally demonstrate a bolometer surpassing this threshold with a noise equivalent power of $30\, \rm{zW}/\sqrt{\rm{Hz}}$ on par with the current record while providing two-orders of magnitude shorter thermal time constant of 500 ns. Importantly, both of these characteristic numbers have been measured directly from the same device, which implies a faithful estimation of the calorimetric energy resolution of a single 30-GHz photon. These improvements stem from the utilization of a graphene monolayer as the active material with extremely low specific heat. The minimum demonstrated time constant of 200 ns falls greatly below the state-of-the-art dephasing times of roughly 100 μs for superconducting qubits and meets the timescales of contemporary readout schemes thus enabling the utilization of thermal detectors in cQED. △ Less

Submitted 11 August, 2020; originally announced August 2020.

Broadband Tunable Phase Shifter For Microwaves

Authors: Jinli Zhang, Tianyi Li, Roope Kokkoniemi, Chengyu Yan, Wei Liu, Matti Partanen, Kuan Yen Tan, Ming He, Lu Ji, Leif Grönberg, Mikko Möttönen

Abstract: We implement a broadly tunable phase shifter for microwaves based on superconducting quantum interference devices (SQUIDs) and study it both experimentally and theoretically. At different frequencies, a unit transmission coefficient, $|S_{21}|=1$, can be theoretically achieved along a curve where the phase shift is controllable by magnetic flux. The fabricated device consists of three equidistant… ▽ More We implement a broadly tunable phase shifter for microwaves based on superconducting quantum interference devices (SQUIDs) and study it both experimentally and theoretically. At different frequencies, a unit transmission coefficient, $|S_{21}|=1$, can be theoretically achieved along a curve where the phase shift is controllable by magnetic flux. The fabricated device consists of three equidistant SQUIDs interrupting a transmission line. We model each SQUID embedded at different positions along the transmission line with two parameters, capacitance and inductance, the values of which we extract from the experiments. In our experiments, the tunability of the phase shift varies from from $0.07\timesπ$ to $0.14\timesπ$ radians along the full-transmission curve with the input frequency ranging from 6.00 to 6.28~GHz. The reported measurements are in good agreement with simulations, which is promising for future design work of phase shifters for different applications. △ Less

Submitted 3 March, 2020; originally announced March 2020.

Effects of device geometry and material properties on dielectric losses in superconducting coplanar-waveguide resonators

Authors: Valtteri Lahtinen, Mikko Möttönen

Abstract: Superconducting coplanar-waveguide (CPW) resonators are one of the key devices in circuit quantum electrodynamics (cQED). Their performance can be limited by dielectric losses in the substrate and in the material interfaces. Reliable modeling is required to aid in the design of low-loss CPW structures for cQED. We analyze the geometric dependence of the dielectric losses in CPW structures using fi… ▽ More Superconducting coplanar-waveguide (CPW) resonators are one of the key devices in circuit quantum electrodynamics (cQED). Their performance can be limited by dielectric losses in the substrate and in the material interfaces. Reliable modeling is required to aid in the design of low-loss CPW structures for cQED. We analyze the geometric dependence of the dielectric losses in CPW structures using finite-element modeling of the participation ratios of the lossy regions. In a practical scenario, uncertainties in the the dielectric constants and loss tangents of these regions introduce uncertainties in the theoretically predicted participation ratios. We present a method for combining loss simulations with measurements of two-level-system-limited quality factors and resonance frequencies of CPW resonators. Namely, we solve an inverse problem to find model parameters producing the measured values. High quality factors are obtainable by properly designing the cross-sectional geometries of the CPW structures, but more accurate modeling and design methods for low-loss CPW resonators are called for major future improvements. Our nonlinear optimization methodology for solving the aforementioned inverse problem is a step in this direction. △ Less

Submitted 10 August, 2020; v1 submitted 28 February, 2020; originally announced February 2020.

Comments: Minor revision: Typos corrected in numerical values in Fig. 3, Fig. 4, and Fig. 7

Journal ref: 2020 J. Phys.: Condens. Matter 32 405702

Tunable refrigerator for non-linear quantum electric circuits

Authors: Hao Hsu, Matti Silveri, András Gunyhó, Jan Goetz, Gianluigi Catelani, Mikko Möttönen

Abstract: The emerging quantum technological applications call for fast and accurate initialization of the corresponding devices to low-entropy quantum states. To this end, we theoretically study a recently demonstrated quantum-circuit refrigerator in the case of non-linear quantum electric circuits such as superconducting qubits. The maximum refrigeration rate of transmon and flux qubits is observed to be… ▽ More The emerging quantum technological applications call for fast and accurate initialization of the corresponding devices to low-entropy quantum states. To this end, we theoretically study a recently demonstrated quantum-circuit refrigerator in the case of non-linear quantum electric circuits such as superconducting qubits. The maximum refrigeration rate of transmon and flux qubits is observed to be roughly an order of magnitude higher than that of usual linear resonators, increasing flexibility in the design. We find that for typical experimental parameters, the refrigerator is suitable for resetting different qubit types to fidelities above 99.99% in a few or a few tens of nanoseconds depending on the scenario. Thus the refrigerator appears to be a promising tool for quantum technology and for detailed studies of open quantum systems. △ Less

Submitted 16 June, 2020; v1 submitted 17 February, 2020; originally announced February 2020.

Comments: 21 pages, 12 figures

Journal ref: Phys. Rev. B 101, 235422 (2020)

Superconducting charge sensor coupled to an electron layer in silicon

Authors: Máté Jenei, Ruichen Zhao, Kuan Y. Tan, Tuomo Tanttu, Kok W. Chan, Yuxin Sun, Vasilii Sevriuk, Fay Hudson, Alessandro Rossi, Andrew Dzurak, Mikko Möttönen

Abstract: Schemes aimed at transferring individual electrons in semiconductor devices and detecting possible transfer errors have increasing importance for metrological applications. We study the coupling of a superconducting Josephson-junction-based charge detector to an electron island defined by field-effect in silicon. The flexibility of our device allows one to tune the coupling using the detector as a… ▽ More Schemes aimed at transferring individual electrons in semiconductor devices and detecting possible transfer errors have increasing importance for metrological applications. We study the coupling of a superconducting Josephson-junction-based charge detector to an electron island defined by field-effect in silicon. The flexibility of our device allows one to tune the coupling using the detector as an additional gate electrode. We study the reliability of the electron sensor in different device configurations and the suitability of various operation modes for error detection in electron pumping experiments. As a result, we obtain a charge detection bandwidth of 5.87 kHz with unity signal to noise ratio at 300 mK bath temperature. △ Less

Submitted 26 September, 2019; originally announced September 2019.

Comments: 7 pages, 6 figures

Waiting time distributions in a two-level fluctuator coupled to a superconducting charge detector

Authors: Máté Jenei, Elina Potanina, Ruichen Zhao, Kuan Y. Tan, Alessandro Rossi, Tuomo Tanttu, Kok W. Chan, Vasilii Sevriuk, Mikko Möttönen, Andrew Dzurak

Abstract: We analyze charge fluctuations in a parasitic state strongly coupled to a superconducting Josephson-junction-based charge detector. The charge dynamics of the state resembles that of electron transport in a quantum dot with two charge states, and hence we refer to it as a two-level fluctuator. By constructing the distribution of waiting times from the measured detector signal and comparing it with… ▽ More We analyze charge fluctuations in a parasitic state strongly coupled to a superconducting Josephson-junction-based charge detector. The charge dynamics of the state resembles that of electron transport in a quantum dot with two charge states, and hence we refer to it as a two-level fluctuator. By constructing the distribution of waiting times from the measured detector signal and comparing it with a waiting time theory, we extract the electron in- and out-tunneling rates for the two-level fluctuator, which are severely asymmetric. △ Less

Submitted 13 September, 2019; v1 submitted 6 September, 2019; originally announced September 2019.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. Research 1, 033163 (2019)

Fast control of dissipation in a superconducting resonator

Authors: Vasilii Sevriuk, Kuan Yen Tan, Eric Hyyppä, Matti Silveri, Matti Partanen, Máté Jenei, Shumpei Masuda, Jan Goetz, Visa Vesterinen, Leif Grönberg, Mikko Möttönen

Abstract: We report on fast tunability of an electromagnetic environment coupled to a superconducting coplanar waveguide resonator. Namely, we utilize a recently-developed quantum-circuit refrigerator (QCR) to experimentally demonstrate a dynamic tunability in the total damping rate of the resonator up to almost two orders of magnitude. Based on the theory it corresponds to a change in the internal damping… ▽ More We report on fast tunability of an electromagnetic environment coupled to a superconducting coplanar waveguide resonator. Namely, we utilize a recently-developed quantum-circuit refrigerator (QCR) to experimentally demonstrate a dynamic tunability in the total damping rate of the resonator up to almost two orders of magnitude. Based on the theory it corresponds to a change in the internal damping rate by nearly four orders of magnitude. The control of the QCR is fully electrical, with the shortest implemented operation times in the range of 10 ns. This experiment constitutes a fast active reset of a superconducting quantum circuit. In the future, a similar scheme can potentially be used to initialize superconducting quantum bits. △ Less

Submitted 27 June, 2019; originally announced June 2019.

Comments: 4 pages, 2 figures

Reconstruction Approach to Quantum Dynamics of Bosonic Systems

Authors: Akseli Mäkinen, Joni Ikonen, Matti Partanen, Mikko Möttönen

Abstract: We propose an approach to analytically solve the quantum dynamics of bosonic systems. The method is based on reconstructing the quantum state of the system from the moments of its annihilation operators, dynamics of which is solved in the Heisenberg picture. The proposed method is general in the sense that it does not assume anything on the initial conditions of the system such as separability, or… ▽ More We propose an approach to analytically solve the quantum dynamics of bosonic systems. The method is based on reconstructing the quantum state of the system from the moments of its annihilation operators, dynamics of which is solved in the Heisenberg picture. The proposed method is general in the sense that it does not assume anything on the initial conditions of the system such as separability, or the structure of the system such as linearity. It is an alternative to the standard master equation approaches, which are analytically demanding especially for large multipartite quantum systems. To demonstrate the proposed technique, we apply it to a system consisting of two coupled damped quantum harmonic oscillators. △ Less

Submitted 25 April, 2019; originally announced April 2019.

Comments: 14 pages, 2 figures

Journal ref: Phys. Rev. A 100, 042109 (2019)

Calibration of cryogenic amplification chains using normal-metal--insulator--superconductor junctions

Authors: Eric Hyyppä, Máté Jenei, Shumpei Masuda, Kuan Yen Tan, Matti Silveri, Jan Goetz, Matti Partanen, Russel E. Lake, Leif Grönberg, Mikko Möttönen

Abstract: Various applications of quantum devices call for an accurate calibration of cryogenic amplification chains. To this end, we present a convenient calibration scheme and use it to accurately measure the total gain and noise temperature of an amplification chain by employing normal-metal--insulator--superconductor (NIS) junctions. Our method is based on the radiation emitted by inelastic electron tun… ▽ More Various applications of quantum devices call for an accurate calibration of cryogenic amplification chains. To this end, we present a convenient calibration scheme and use it to accurately measure the total gain and noise temperature of an amplification chain by employing normal-metal--insulator--superconductor (NIS) junctions. Our method is based on the radiation emitted by inelastic electron tunneling across voltage-biased NIS junctions. We derive an analytical equation that relates the generated power to the applied bias voltage which is the only control parameter of the device. After the setup has been characterized using a standard voltage reflection measurement, the total gain and the noise temperature are extracted by fitting the analytical equation to the microwave power measured at the output of the amplification chain. The 1$σ$ uncertainty of the total gain of 51.84 dB appears to be of the order of 0.1 dB. △ Less

Submitted 1 April, 2019; originally announced April 2019.

Comments: 5 pages, 3 figures

Reservoir Engineering using Quantum Optimal Control for Qubit Reset

Authors: Daniel Basilewitsch, Francesco Cosco, Nicola Lo Gullo, Mikko Möttönen, Tapio Ala-Nissilä, Christiane P. Koch, Sabrina Maniscalco

Abstract: We determine how to optimally reset a superconducting qubit which interacts with a thermal environment in such a way that the coupling strength is tunable. Describing the system in terms of a time-local master equation with time-dependent decay rates and using quantum optimal control theory, we identify temporal shapes of tunable level splittings which maximize the efficiency of the reset protocol… ▽ More We determine how to optimally reset a superconducting qubit which interacts with a thermal environment in such a way that the coupling strength is tunable. Describing the system in terms of a time-local master equation with time-dependent decay rates and using quantum optimal control theory, we identify temporal shapes of tunable level splittings which maximize the efficiency of the reset protocol in terms of duration and error. Time-dependent level splittings imply a modification of the system-environment coupling, varying the decay rates as well as the Lindblad operators. Our approach thus demonstrates efficient reservoir engineering employing quantum optimal control. We find the optimized reset strategy to consist in maximizing the decay rate from one state and driving non-adiabatic population transfer into this strongly decaying state. △ Less

Submitted 26 September, 2019; v1 submitted 12 March, 2019; originally announced March 2019.

Comments: 11 pages, 5 figures

Journal ref: New. J. Phys 21, 093054 (2019)

Correlation Picture Approach to Open-Quantum-System Dynamics

Authors: S. Alipour, A. T. Rezakhani, A. P. Babu, K. Mølmer, M. Möttönen, T. Ala-Nissila

Abstract: We introduce a new dynamical picture, referred to as correlation picture,' which connects a correlated state to its uncorrelated counterpart. Using this picture allows us to derive an exact dynamical equation for a general open-system dynamics with system--environment correlations included. This exact dynamics is in the form of a Lindblad-like equation even in the presence of initial system-enviro… ▽ More We introduce a new dynamical picture, referred to as correlation picture,' which connects a correlated state to its uncorrelated counterpart. Using this picture allows us to derive an exact dynamical equation for a general open-system dynamics with system--environment correlations included. This exact dynamics is in the form of a Lindblad-like equation even in the presence of initial system-environment correlations. For explicit calculations, we also develop a weak-correlation expansion formalism that allows us to perform systematic perturbative approximations. This expansion provides approximate master equations which can feature advantages over existing weak-coupling techniques. As a special case, we derive a Markovian master equation, which is different from existing approaches. We compare our equations with corresponding standard weak-coupling equations by two examples, where our correlation picture formalism is more accurate, or at least as accurate as weak-coupling equations. △ Less

Submitted 13 May, 2020; v1 submitted 9 March, 2019; originally announced March 2019.

Comments: 8 + 16 pages

Journal ref: Phys. Rev. X 10, 041024 (2020)

System-Environment Correlations in Qubit Initialization and Control

Authors: Jani Tuorila, Jürgen Stockburger, Tapio Ala-Nissila, Joachim Ankerhold, Mikko Möttönen

Abstract: The impressive progress in fabricating and controlling superconducting devices for quantum information processing has reached a level where reliable theoretical predictions need to account for quantum correlations that are not captured by the conventional modeling of contemporary quantum computers. This applies particularly to the qubit initialization as the process which crucially limits typical… ▽ More The impressive progress in fabricating and controlling superconducting devices for quantum information processing has reached a level where reliable theoretical predictions need to account for quantum correlations that are not captured by the conventional modeling of contemporary quantum computers. This applies particularly to the qubit initialization as the process which crucially limits typical operation times. Here we employ numerically exact methods to study realistic implementations of a transmon qubit embedded in electromagnetic environments focusing on the most important system-reservoir correlation effects such as the Lamb shift and entanglement. For the qubit initialization we find a fundamental trade-off between speed and accuracy which sets intrinsic constraints in the optimization of future reset protocols. Instead, the fidelities of quantum logic gates can be sufficiently accurately predicted by standard treatments. Our results can be used to accurately predict the performance of specific set-ups and also to guide future experiments in probing low-temperature properties of qubit reservoirs. △ Less

Submitted 13 August, 2019; v1 submitted 18 January, 2019; originally announced January 2019.

Comments: 15 pages, 5 figures. Updated to published version

Journal ref: Phys. Rev. Research 1, 013004 (2019)

Optimized heat transfer at exceptional points in quantum circuits

Authors: Matti Partanen, Jan Goetz, Kuan Yen Tan, Kassius Kohvakka, Vasilii Sevriuk, Russell E. Lake, Roope Kokkoniemi, Joni Ikonen, Dibyendu Hazra, Akseli Mäkinen, Eric Hyyppä, Leif Grönberg, Visa Vesterinen, Matti Silveri, Mikko Möttönen

Abstract: Superconducting quantum circuits are potential candidates to realize a large-scale quantum computer. The envisioned large density of integrated components, however, requires a proper thermal management and control of dissipation. To this end, it is advantageous to utilize tunable dissipation channels and to exploit the optimized heat flow at exceptional points (EPs). Here, we experimentally realiz… ▽ More Superconducting quantum circuits are potential candidates to realize a large-scale quantum computer. The envisioned large density of integrated components, however, requires a proper thermal management and control of dissipation. To this end, it is advantageous to utilize tunable dissipation channels and to exploit the optimized heat flow at exceptional points (EPs). Here, we experimentally realize an EP in a superconducting microwave circuit consisting of two resonators. The EP is a singularity point of the Hamiltonian, and corresponds to the most efficient heat transfer between the resonators without oscillation of energy. We observe a crossover from underdamped to overdamped coupling via the EP by utilizing photon-assisted tunneling as an \emph{in situ} tunable dissipative element in one of the resonators. The methods studied here can be applied to different circuits to obtain fast dissipation, for example, for initializing qubits to their ground states. In addition, these results pave the way towards thorough investigation of parity--time ($\mathcal{PT}$) symmetric systems and the spontaneous symmetry breaking in superconducting microwave circuits operating at the level of single energy quanta. △ Less

Submitted 6 December, 2018; originally announced December 2018.

Journal ref: Phys. Rev. B 100, 134505 (2019)

Qubit Measurement by Multichannel Driving

Authors: Joni Ikonen, Jan Goetz, Jesper Ilves, Aarne Keränen, Andras M. Gunyho, Matti Partanen, Kuan Y. Tan, Dibyendu Hazra, Leif Grönberg, Visa Vesterinen, Slawomir Simbierowicz, Juha Hassel, Mikko Möttönen

Abstract: We theoretically propose and experimentally implement a method of measuring a qubit by driving it close to the frequency of a dispersively coupled bosonic mode. The separation of the bosonic states corresponding to different qubit states begins essentially immediately at maximum rate, leading to a speedup in the measurement protocol. Also the bosonic mode can be simultaneously driven to optimize m… ▽ More We theoretically propose and experimentally implement a method of measuring a qubit by driving it close to the frequency of a dispersively coupled bosonic mode. The separation of the bosonic states corresponding to different qubit states begins essentially immediately at maximum rate, leading to a speedup in the measurement protocol. Also the bosonic mode can be simultaneously driven to optimize measurement speed and fidelity. We experimentally test this measurement protocol using a superconducting qubit coupled to a resonator mode. For a certain measurement time, we observe that the conventional dispersive readout yields close to 100% higher average measurement error than our protocol. Finally, we use an additional resonator drive to leave the resonator state to vacuum if the qubit is in the ground state during the measurement protocol. This suggests that the proposed measurement technique may become useful in unconditionally resetting the resonator to a vacuum state after the measurement pulse. △ Less

Submitted 25 February, 2019; v1 submitted 12 October, 2018; originally announced October 2018.

Comments: Includes supplementary information

Journal ref: Phys. Rev. Lett. 122, 080503 (2019)

Observation of a broadband Lamb shift in an engineered quantum system

Authors: Matti Silveri, Shumpei Masuda, Vasilii Sevriuk, Kuan Y. Tan, Máté Jenei, Eric Hyyppä, Fabian Hassler, Matti Partanen, Jan Goetz, Russell E. Lake, Leif Grönberg, Mikko Möttönen

Abstract: The shift of energy levels owing to broadband electromagnetic vacuum fluctuations, the Lamb shift, has been pivotal in the development of quantum electrodynamics and in understanding atomic spectra. Currently, small energy shifts in engineered quantum systems are of paramount importance owing to the extreme precision requirements in applications such as quantum computing. However, without a tunabl… ▽ More The shift of energy levels owing to broadband electromagnetic vacuum fluctuations, the Lamb shift, has been pivotal in the development of quantum electrodynamics and in understanding atomic spectra. Currently, small energy shifts in engineered quantum systems are of paramount importance owing to the extreme precision requirements in applications such as quantum computing. However, without a tunable environment it is challenging to resolve the Lamb shift in its original broadband case. Consequently, the observations in other than atomic systems are limited to environments comprised of narrow-band modes. Here, we observe a broadband Lamb shift in high-quality superconducting resonators, a scenario also accessing static shifts inaccessible in Lamb's experiment. We measure a continuous change of several megahertz in the fundamental resonator frequency by externally tuning the coupling strength of the engineered broadband environment which is based on hybrid normal-metal--superconductor tunnel junctions. Our results may lead to improved control of dissipation in high-quality engineered quantum systems and open new possibilities for studying synthetic open quantum matter using this hybrid experimental platform. △ Less

Submitted 1 February, 2019; v1 submitted 4 September, 2018; originally announced September 2018.

Journal ref: Nat. Phys. 15, 533 (2019)

Theory of quantum-circuit refrigeration by photon-assisted electron tunneling

Authors: Matti Silveri, Hermann Grabert, Shumpei Masuda, Kuan Yen Tan, Mikko Möttönen

Abstract: We focus on a recently experimentally realized scenario of normal-metal-insulator-superconductor tunnel junctions coupled to a superconducting resonator. We develop a first-principles theory to describe the effect of photon-assisted electron tunneling on the quantum state of the resonator. Our results are in very good quantitative agreement with the previous experiments on refrigeration and heatin… ▽ More We focus on a recently experimentally realized scenario of normal-metal-insulator-superconductor tunnel junctions coupled to a superconducting resonator. We develop a first-principles theory to describe the effect of photon-assisted electron tunneling on the quantum state of the resonator. Our results are in very good quantitative agreement with the previous experiments on refrigeration and heating of the resonator using the photon-assisted tunneling, thus providing a stringent verification of the developed theory. Importantly, our results provide simple analytical estimates of the voltage-tunable coupling strength and temperature of the thermal reservoir formed by the photon-assisted tunneling. Consequently, they are used to introduce optimization principles for initialization of quantum devices using such a quantum-circuit refrigerator. Thanks to the first-principles nature of our approach, extension of the theory to the full spectrum of quantum electric devices seems plausible. △ Less

Submitted 28 September, 2017; v1 submitted 22 June, 2017; originally announced June 2017.

Comments: Published version

Journal ref: Phys. Rev. B 96, 094524 (2017)

Quantum Gates for Propagating Microwave Photons

Authors: Roope Kokkoniemi, Tuomas Ollikainen, Russell E. Lake, Sakari Saarenpää, Kuan Yen Tan, Janne I. Kokkala, Ceren B. Dağ, Joonas Govenius, Mikko Möttönen

Abstract: We report a generic scheme to implement transmission-type quantum gates for propagating microwave photons, based on a sequence of lumped-element components on transmission lines. By choosing three equidistant superconducting quantum interference devices (SQUIDs) as the components on a single transmission line, we experimentally implement a magnetic-flux-tunable phase shifter and demonstrate that i… ▽ More We report a generic scheme to implement transmission-type quantum gates for propagating microwave photons, based on a sequence of lumped-element components on transmission lines. By choosing three equidistant superconducting quantum interference devices (SQUIDs) as the components on a single transmission line, we experimentally implement a magnetic-flux-tunable phase shifter and demonstrate that it produces a broad range of phase shifts and full transmission within the experimental uncertainty. Together with previously demonstrated beam splitters, these phase shifters can be utilized to implement arbitrary single-qubit gates. Furthermore, we theoretically show that replacing the SQUIDs by superconducting qubits, the phase shifter can be made strongly nonlinear, thus introducing deterministic photon--photon interactions. These results critically complement the previous demonstrations of on-demand single-photon sources and detectors, and hence pave the way for an all-microwave quantum computer based on propagating photons. △ Less

Submitted 7 March, 2017; originally announced March 2017.

Efficient protocol for qubit initialization with a tunable environment

Authors: Jani Tuorila, Matti Partanen, Tapio Ala-Nissila, Mikko Möttönen

Abstract: We propose an efficient qubit initialization protocol based on a dissipative environment that can be dynamically adjusted. Here the qubit is coupled to a thermal bath through a tunable harmonic oscillator. On-demand initialization is achieved by sweeping the oscillator rapidly into resonance with the qubit. This resonant coupling with the engineered environment induces fast relaxation to the groun… ▽ More We propose an efficient qubit initialization protocol based on a dissipative environment that can be dynamically adjusted. Here the qubit is coupled to a thermal bath through a tunable harmonic oscillator. On-demand initialization is achieved by sweeping the oscillator rapidly into resonance with the qubit. This resonant coupling with the engineered environment induces fast relaxation to the ground state of the system, and a consecutive rapid sweep back to off resonance guarantees weak excess dissipation during quantum computations. We solve the corresponding quantum dynamics using a Markovian master equation for the reduced density operator of the qubit-bath system. This allows us to optimize the parameters and the initialization protocol for the qubit. Our analytical calculations show that the ground-state occupation of our system is well protected during the fast sweeps of the environmental coupling and, consequently, we obtain an estimate for the duration of our protocol by solving the transition rates between the low-energy eigenstates with the Jacobian diagonalization method. Our results suggest that the current experimental state of the art for the initialization speed of superconducting qubits at a given fidelity can be considerably improved. △ Less

Submitted 13 December, 2016; originally announced December 2016.

Comments: 17 pages, 6 figures