-
Equivalence of flexible stripline and coaxial cables for superconducting qubit control and readout pulses
Authors:
V. Y. Monarkha,
S. Simbierowicz,
M. Borrelli,
R. van Gulik,
N. Drobotun,
D. Kuitenbrouwer,
D. Bouman,
D. Datta,
P. Eskelinen,
E. Mannila,
J. Kaikkonen,
V. Vesterinen,
J. Govenius,
R. E. Lake
Abstract:
We report a comparative study on microwave control lines for a transmon qubit using: (i) flexible stripline transmission lines, and (ii) semi-rigid coaxial cables. During each experiment we performed repeated measurements of the energy relaxation and coherence times of a transmon qubit using one of the wiring configurations. Each measurement run spanned 70 h to 250 h of measurement time, and four…
▽ More
We report a comparative study on microwave control lines for a transmon qubit using: (i) flexible stripline transmission lines, and (ii) semi-rigid coaxial cables. During each experiment we performed repeated measurements of the energy relaxation and coherence times of a transmon qubit using one of the wiring configurations. Each measurement run spanned 70 h to 250 h of measurement time, and four separate cooldowns were performed so that each configuration could be tested twice. From these datasets we observe that changing the microwave control lines from coaxial cables to flexible stripline transmission lines does not have a measurable effect on coherence compared to thermal cycling the system, or random coherence fluctuations. Our results open up the possibility of large scale integration of qubit control lines with integrated component with planar layouts on flexible substrate.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
Dynamics of a dispersively coupled transmon qubit in the presence of a noise source embedded in the control line
Authors:
Antti Vaaranta,
Marco Cattaneo,
Russell E. Lake
Abstract:
We describe transmon qubit dynamics in the presence of noise introduced by an impedance-matched resistor ($50\,\mathrmΩ$) that is embedded in the qubit control line. To obtain the time evolution, we rigorously derive the circuit Hamiltonian of the qubit, readout resonator and resistor by describing the latter as an infinite collection of bosonic modes through the Caldeira-Leggett model. Starting f…
▽ More
We describe transmon qubit dynamics in the presence of noise introduced by an impedance-matched resistor ($50\,\mathrmΩ$) that is embedded in the qubit control line. To obtain the time evolution, we rigorously derive the circuit Hamiltonian of the qubit, readout resonator and resistor by describing the latter as an infinite collection of bosonic modes through the Caldeira-Leggett model. Starting from this Jaynes-Cummings Hamiltonian with inductive coupling to the remote bath comprised of the resistor, we consistently obtain the Lindblad master equation for the qubit and resonator in the dispersive regime. We exploit the underlying symmetries of the master equation to transform the Liouvillian superoperator into a block diagonal matrix. The block diagonalization method reveals that the rate of exponential decoherence of the qubit is well-captured by the slowest decaying eigenmode of a single block of the Liouvillian superoperator, which can be easily computed. The model captures the often used dispersive strong limit approximation of the qubit decoherence rate being linearly proportional to the number of thermal photons in the readout resonator but predicts remarkably better decoherence rates when the dissipation rate of the resonator is increased beyond the dispersive strong regime. Our work provides a full quantitative description of the contribution to the qubit decoherence rate coming from the control line in chips that are currently employed in circuit QED laboratories, and suggests different possible ways to reduce this source of noise.
△ Less
Submitted 13 October, 2022; v1 submitted 17 June, 2022;
originally announced June 2022.
-
Microwave calibration of qubit drive line components at millikelvin temperatures
Authors:
Slawomir Simbierowicz,
Volodymyr Y. Monarkha,
Suren Singh,
Nizar Messaoudi,
Philip Krantz,
Russell E. Lake
Abstract:
Systematic errors in qubit state preparation arise due to non-idealities in the qubit control lines such as impedance mismatch. Using a data-based methodology of short-open-load calibration at a temperature of 30 mK, we report calibrated 1-port scattering parameter data of individual qubit drive line components. At 5~GHz, cryogenic return losses of a 20-dB-attenuator, 10-dB-attenuator, a 230-mm-lo…
▽ More
Systematic errors in qubit state preparation arise due to non-idealities in the qubit control lines such as impedance mismatch. Using a data-based methodology of short-open-load calibration at a temperature of 30 mK, we report calibrated 1-port scattering parameter data of individual qubit drive line components. At 5~GHz, cryogenic return losses of a 20-dB-attenuator, 10-dB-attenuator, a 230-mm-long 0.86-mm silver-plated cupronickel coaxial cable, and a 230-mm-long 0.86-mm NbTi coaxial cable were found to be 35$^{+3}_{-2}$ dB, 33$^{+3}_{-2}$ dB, 34$^{+3}_{-2}$ dB, and 29$^{+2}_{-1}$ dB respectively. For the same frequency, we also extract cryogenic insertion losses of 0.99$^{+0.04}_{-0.04}$ dB and 0.02$^{+0.04}_{-0.04}$ dB for the coaxial cables. We interpret the results using a master equation simulation of all XY gates performed on a single qubit. For example, we simulate a sequence of two 5 ns gate pulses (X & Y) through a 2-element Fabry-Pérot cavity with 276-mm path length directly preceding the qubit, and establish that the return loss of its reflective elements must be >9.7 dB (> 14.7 dB) to obtain 99.9 % (99.99 %) gate fidelity.
△ Less
Submitted 29 January, 2022; v1 submitted 9 December, 2021;
originally announced December 2021.
-
Depinning of the Charge-Density Waves in Quasi-2D 1T-TaS2 Devices Operating at Room Temperature
Authors:
A. Mohammadzadeh,
A. Rehman,
F. Kargar,
S. Rumyantsev,
J. M. Smulko,
W. Knap,
R. K. Lake,
A. A. Balandin
Abstract:
We report on depinning of nearly-commensurate charge-density waves in 1T-TaS2 thin-films at room temperature. A combination of the differential current-voltage measurements with the low-frequency noise spectroscopy provide unambiguous means for detecting the depinning threshold field in quasi-2D materials. The depinning process in 1T-TaS2 is not accompanied by an observable abrupt increase in elec…
▽ More
We report on depinning of nearly-commensurate charge-density waves in 1T-TaS2 thin-films at room temperature. A combination of the differential current-voltage measurements with the low-frequency noise spectroscopy provide unambiguous means for detecting the depinning threshold field in quasi-2D materials. The depinning process in 1T-TaS2 is not accompanied by an observable abrupt increase in electric current - in striking contrast to depinning in the conventional charge-density-wave materials with quasi-1D crystal structure. We explained it by the fact that the current density from the charge-density waves in the 1T-TaS2 devices is orders of magnitude smaller than the current density of the free carriers available in the discommensuration network surrounding the commensurate charge-density-wave islands. The depinning fields in 1T-TaS2 thin-film devices are several orders of magnitude larger than those in quasi-1D van der Waals materials. Obtained results are important for the proposed applications of the charge-density-wave devices in electronics.
△ Less
Submitted 28 April, 2021;
originally announced April 2021.
-
Direct formation of nitrogen-vacancy centers in nitrogen doped diamond along the trajectories of swift heavy ions
Authors:
Russell E. Lake,
Arun Persaud,
Casey Christian,
Edward S. Barnard,
Emory M. Chan,
Andrew A. Bettiol,
Marilena Tomut,
Christina Trautmann,
Thomas Schenkel
Abstract:
We report depth-resolved photoluminescence measurements of nitrogen-vacancy (NV$^-$) centers formed along the tracks of swift heavy ions (SHIs) in type Ib synthetic single crystal diamonds that had been doped with 100 ppm nitrogen during crystal growth. Analysis of the spectra shows that NV$^-$ centers are formed preferentially within regions where electronic stopping processes dominate and not at…
▽ More
We report depth-resolved photoluminescence measurements of nitrogen-vacancy (NV$^-$) centers formed along the tracks of swift heavy ions (SHIs) in type Ib synthetic single crystal diamonds that had been doped with 100 ppm nitrogen during crystal growth. Analysis of the spectra shows that NV$^-$ centers are formed preferentially within regions where electronic stopping processes dominate and not at the end of the ion range where elastic collisions lead to formation of vacancies and defects. Thermal annealing further increases NV yields after irradiation with SHIs preferentially in regions with high vacancy densities. NV centers formed along the tracks of single swift heavy ions can be isolated with lift-out techniques for explorations of color center qubits in quasi-1D registers with an average qubit spacing of a few nanometers and of order 100 color centers per micrometer along 10 to 30 micrometer long percolation chains.
△ Less
Submitted 1 March, 2021; v1 submitted 6 November, 2020;
originally announced November 2020.
-
Characterizing cryogenic amplifiers with a matched temperature-variable noise source
Authors:
Slawomir Simbierowicz,
Visa Vesterinen,
Joshua Milem,
Aleksi Lintunen,
Mika Oksanen,
Leif Roschier,
Leif Grönberg,
Juha Hassel,
David Gunnarsson,
Russell E. Lake
Abstract:
We present a cryogenic microwave noise source with a characteristic impedance of 50 $Ω$, which can be installed in a coaxial line of a cryostat. The bath temperature of the noise source is continuously variable between 0.1 K and 5 K without causing significant back-action heating on the sample space. As a proof-of-concept experiment, we perform Y-factor measurements of an amplifier cascade that in…
▽ More
We present a cryogenic microwave noise source with a characteristic impedance of 50 $Ω$, which can be installed in a coaxial line of a cryostat. The bath temperature of the noise source is continuously variable between 0.1 K and 5 K without causing significant back-action heating on the sample space. As a proof-of-concept experiment, we perform Y-factor measurements of an amplifier cascade that includes a traveling wave parametric amplifier and a commercial high electron mobility transistor amplifier. We observe system noise temperatures as low as $680^{+20}_{-200}$ mK at 5.7 GHz corresponding to $1.5^{+0.1}_{-0.7}$ excess photons. The system we present has immediate applications in the validation of solid-state qubit readout lines.
△ Less
Submitted 25 February, 2021; v1 submitted 7 September, 2020;
originally announced September 2020.
-
Bolometer operating at the threshold for circuit quantum electrodynamics
Authors:
R. Kokkoniemi,
J. -P. Girard,
D. Hazra,
A. Laitinen,
J. Govenius,
R. E. Lake,
I. Sallinen,
V. Vesterinen,
P. Hakonen,
M. Möttönen
Abstract:
Radiation sensors based on the heating effect of the absorbed radiation are typically relatively simple to operate and flexible in terms of the input frequency. Consequently, they are widely applied, for example, in gas detection, security, THz imaging, astrophysical observations, and medical applications. A new spectrum of important applications is currently emerging from quantum technology and e…
▽ More
Radiation sensors based on the heating effect of the absorbed radiation are typically relatively simple to operate and flexible in terms of the input frequency. Consequently, they are widely applied, for example, in gas detection, security, THz imaging, astrophysical observations, and medical applications. A new spectrum of important applications is currently emerging from quantum technology and especially from electrical circuits behaving quantum mechanically. This circuit quantum electrodynamics (cQED) has given rise to unprecedented single-photon detectors and a quantum computer supreme to the classical supercomputers in a certain task. Thermal sensors are appealing in enhancing these devices since they are not plagued by quantum noise and are smaller, simpler, and consume about six orders of magnitude less power than the commonly used traveling-wave parametric amplifiers. However, despite great progress in the speed and noise levels of thermal sensors, no bolometer to date has proven fast and sensitive enough to provide advantages in cQED. Here, we experimentally demonstrate a bolometer surpassing this threshold with a noise equivalent power of $30\, \rm{zW}/\sqrt{\rm{Hz}}$ on par with the current record while providing two-orders of magnitude shorter thermal time constant of 500 ns. Importantly, both of these characteristic numbers have been measured directly from the same device, which implies a faithful estimation of the calorimetric energy resolution of a single 30-GHz photon. These improvements stem from the utilization of a graphene monolayer as the active material with extremely low specific heat. The minimum demonstrated time constant of 200 ns falls greatly below the state-of-the-art dephasing times of roughly 100 μs for superconducting qubits and meets the timescales of contemporary readout schemes thus enabling the utilization of thermal detectors in cQED.
△ Less
Submitted 11 August, 2020;
originally announced August 2020.
-
Anomalous Magneto Optic Effects from an Antiferromagnet Topological-Insulator Heterostructure
Authors:
Amrit De,
Tonmoy K. Bhowmick,
Roger Lake
Abstract:
Materials with no net magnetization are generally not magneto-optically active. While this is individually true for a collinear antiferromagnet (AFM) and a topological insulator (TI), it is shown here that the magneto-optic Kerr effect (MOKE) emerges when the TI and AFM films are proximity coupled. Because of the lack of macroscopic magnetization, the AFM only couples to the spin of one of the TI'…
▽ More
Materials with no net magnetization are generally not magneto-optically active. While this is individually true for a collinear antiferromagnet (AFM) and a topological insulator (TI), it is shown here that the magneto-optic Kerr effect (MOKE) emerges when the TI and AFM films are proximity coupled. Because of the lack of macroscopic magnetization, the AFM only couples to the spin of one of the TI's surfaces breaking time-reversal and inversion symmetry -- which leads to a tiny $μ$deg MOKE signal. This small MOKE can be easily enhanced by 5 orders of magnitude, via cavity resonance, by optimizing the AFM and TI film thicknesses on the substrate. For slightly off-resonant structures, a 6 deg Kerr rotation can be electrically switched on by varying the Fermi energy. This requires less than 20 meV, which is encouraging for low power spintronics and magneto-optic devices. We further show that this simple structure is easily resilient to 5% material growth error.
△ Less
Submitted 4 June, 2020;
originally announced June 2020.
-
Current Oscillations in Quasi-2D Charge-Density-Wave 1T-TaS2 Devices: Revisiting the "Narrow Band Noise" Concept
Authors:
Adane K. Geremew,
Sergey Rumyantsev,
Roger Lake,
Alexander A. Balandin
Abstract:
We report on current oscillations in quasi two-dimensional (2D) 1T-TaS2 charge-density-wave devices. The MHz-frequency range of the oscillations and the linear dependence of the frequency of the oscillations on the current resemble closely the "narrow band noise," which was often observed in the classical bulk quasi-one-dimensional (1D) trichalcogenide charge-density-wave materials. In bulk quasi-…
▽ More
We report on current oscillations in quasi two-dimensional (2D) 1T-TaS2 charge-density-wave devices. The MHz-frequency range of the oscillations and the linear dependence of the frequency of the oscillations on the current resemble closely the "narrow band noise," which was often observed in the classical bulk quasi-one-dimensional (1D) trichalcogenide charge-density-wave materials. In bulk quasi-1D materials, the "narrow band noise" was interpreted as a direct evidence of the charge-density-wave sliding. Despite the similarities, we argue that the nature of the MHz oscillations in quasi-2D 1T-TaS2 is different from the "narrow band noise." Analysis of the biasing conditions and current indicate that the observed oscillations are related to the current instabilities due to the voltage-induced transition from the nearly commensurate to incommensurate charge-density-wave phase.
△ Less
Submitted 29 February, 2020;
originally announced March 2020.
-
Dielectric loss extraction for superconducting microwave resonators
Authors:
C. R. H. McRae,
R. E. Lake,
J. L. Long,
M. Bal,
X. Wu,
B. Jugdersuren,
T. H. Metcalf,
X. Liu,
D. P. Pappas
Abstract:
The investigation of two-level-state (TLS) loss in dielectric materials and interfaces remains at the forefront of materials research in superconducting quantum circuits. We demonstrate a method of TLS loss extraction of a thin film dielectric by measuring a lumped element resonator fabricated from a superconductor-dielectric-superconductor trilayer. We extract the dielectric loss by formulating a…
▽ More
The investigation of two-level-state (TLS) loss in dielectric materials and interfaces remains at the forefront of materials research in superconducting quantum circuits. We demonstrate a method of TLS loss extraction of a thin film dielectric by measuring a lumped element resonator fabricated from a superconductor-dielectric-superconductor trilayer. We extract the dielectric loss by formulating a circuit model for a lumped element resonator with TLS loss and then fitting to this model using measurements from a set of three resonator designs: a coplanar waveguide resonator, a lumped element resonator with an interdigitated capacitor, and a lumped element resonator with a parallel plate capacitor that includes the dielectric thin film of interest. Unlike other methods, this allows accurate measurement of materials with TLS loss lower than $10^{-6}$. We demonstrate this method by extracting a TLS loss of $1.02 \times 10^{-3}$ for sputtered $\mathrm{Al_2O_3}$ using a set of samples fabricated from an $\mathrm{Al/Al_2O_3/Al}$ trilayer. We observe a difference of 11$\%$ between extracted loss of the trilayer with and without the implementation of this method.
△ Less
Submitted 2 May, 2020; v1 submitted 16 September, 2019;
originally announced September 2019.
-
Amplitude and frequency sensing of microwave fields with a superconducting transmon qudit
Authors:
Maximilian Kristen,
Andre Schneider,
Alexander Stehli,
Tim Wolz,
Sergey Danilin,
Hsiang S. Ku,
Junling Long,
Xian Wu,
Russell E. Lake,
David P. Pappas,
Alexey V. Ustinov,
Martin Weides
Abstract:
Experiments with superconducting circuits require careful calibration of the applied pulses and fields over a large frequency range. This remains an ongoing challenge as commercial semiconductor electronics are not able to probe signals arriving at the chip due to its cryogenic environment. Here, we demonstrate how the on-chip amplitude and frequency of a microwave signal can be inferred from the…
▽ More
Experiments with superconducting circuits require careful calibration of the applied pulses and fields over a large frequency range. This remains an ongoing challenge as commercial semiconductor electronics are not able to probe signals arriving at the chip due to its cryogenic environment. Here, we demonstrate how the on-chip amplitude and frequency of a microwave signal can be inferred from the ac Stark shifts of higher transmon levels. In our time-resolved measurements we employ Ramsey fringes, allowing us to detect the amplitude of the systems transfer function over a range of several hundreds of MHz with an energy sensitivity on the order of $10^{-4}$. Combined with similar measurements for the phase of the transfer function, our sensing method can facilitate pulse correction for high fidelity quantum gates in superconducting circuits. Additionally, the potential to characterize arbitrary microwave fields promotes applications in related areas of research, such as quantum optics or hybrid microwave systems including photonic, mechanical or magnonic subsystems.
△ Less
Submitted 20 May, 2020; v1 submitted 26 August, 2019;
originally announced August 2019.
-
Efficient quantum state tomography with auxiliary Hilbert space
Authors:
Ruifeng Liu,
Junling Long,
Pei Zhang,
Russell E. Lake,
Hong Gao,
David P. Pappas,
Fuli Li
Abstract:
Quantum state tomography is an important tool for quantum communication, computation, metrology, and simulation. Efficient quantum state tomography on a high dimensional quantum system is still a challenging problem. Here, we propose a novel quantum state tomography method, auxiliary Hilbert space tomography, to avoid pre-rotations before measurement in a quantum state tomography experiment. Our m…
▽ More
Quantum state tomography is an important tool for quantum communication, computation, metrology, and simulation. Efficient quantum state tomography on a high dimensional quantum system is still a challenging problem. Here, we propose a novel quantum state tomography method, auxiliary Hilbert space tomography, to avoid pre-rotations before measurement in a quantum state tomography experiment. Our method requires projective measurements in a higher dimensional space that contains the subspace that includes the prepared states. We experimentally demonstrate this method with orbital angular momentum states of photons. In our experiment, the quantum state tomography measurements are as simple as taking a photograph with a camera. We experimentally verify our method with near-pure- and mixed-states of orbital angular momentum with dimension up to $d=13$, and achieve greater than 95 % state fidelities for all states tested. This method dramatically reduces the complexity of measurements for full quantum state tomography, and shows potential application in various high dimensional quantum information tasks.
△ Less
Submitted 6 August, 2019; v1 submitted 1 August, 2019;
originally announced August 2019.
-
Calibration of cryogenic amplification chains using normal-metal--insulator--superconductor junctions
Authors:
Eric Hyyppä,
Máté Jenei,
Shumpei Masuda,
Kuan Yen Tan,
Matti Silveri,
Jan Goetz,
Matti Partanen,
Russel E. Lake,
Leif Grönberg,
Mikko Möttönen
Abstract:
Various applications of quantum devices call for an accurate calibration of cryogenic amplification chains. To this end, we present a convenient calibration scheme and use it to accurately measure the total gain and noise temperature of an amplification chain by employing normal-metal--insulator--superconductor (NIS) junctions. Our method is based on the radiation emitted by inelastic electron tun…
▽ More
Various applications of quantum devices call for an accurate calibration of cryogenic amplification chains. To this end, we present a convenient calibration scheme and use it to accurately measure the total gain and noise temperature of an amplification chain by employing normal-metal--insulator--superconductor (NIS) junctions. Our method is based on the radiation emitted by inelastic electron tunneling across voltage-biased NIS junctions. We derive an analytical equation that relates the generated power to the applied bias voltage which is the only control parameter of the device. After the setup has been characterized using a standard voltage reflection measurement, the total gain and the noise temperature are extracted by fitting the analytical equation to the microwave power measured at the output of the amplification chain. The 1$σ$ uncertainty of the total gain of 51.84 dB appears to be of the order of 0.1 dB.
△ Less
Submitted 1 April, 2019;
originally announced April 2019.
-
Optimized heat transfer at exceptional points in quantum circuits
Authors:
Matti Partanen,
Jan Goetz,
Kuan Yen Tan,
Kassius Kohvakka,
Vasilii Sevriuk,
Russell E. Lake,
Roope Kokkoniemi,
Joni Ikonen,
Dibyendu Hazra,
Akseli Mäkinen,
Eric Hyyppä,
Leif Grönberg,
Visa Vesterinen,
Matti Silveri,
Mikko Möttönen
Abstract:
Superconducting quantum circuits are potential candidates to realize a large-scale quantum computer. The envisioned large density of integrated components, however, requires a proper thermal management and control of dissipation. To this end, it is advantageous to utilize tunable dissipation channels and to exploit the optimized heat flow at exceptional points (EPs). Here, we experimentally realiz…
▽ More
Superconducting quantum circuits are potential candidates to realize a large-scale quantum computer. The envisioned large density of integrated components, however, requires a proper thermal management and control of dissipation. To this end, it is advantageous to utilize tunable dissipation channels and to exploit the optimized heat flow at exceptional points (EPs). Here, we experimentally realize an EP in a superconducting microwave circuit consisting of two resonators. The EP is a singularity point of the Hamiltonian, and corresponds to the most efficient heat transfer between the resonators without oscillation of energy. We observe a crossover from underdamped to overdamped coupling via the EP by utilizing photon-assisted tunneling as an \emph{in situ} tunable dissipative element in one of the resonators. The methods studied here can be applied to different circuits to obtain fast dissipation, for example, for initializing qubits to their ground states. In addition, these results pave the way towards thorough investigation of parity--time ($\mathcal{PT}$) symmetric systems and the spontaneous symmetry breaking in superconducting microwave circuits operating at the level of single energy quanta.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Active protection of a superconducting qubit with an interferometric Josephson isolator
Authors:
Baleegh Abdo,
Nicholas T. Bronn,
Oblesh Jinka,
Salvatore Olivadese,
Antonio D. Corcoles,
Vivekananda P. Adiga,
Markus Brink,
Russell E. Lake,
Xian Wu,
David P. Pappas,
Jerry M. Chow
Abstract:
Nonreciprocal microwave devices play several critical roles in high-fidelity, quantum-nondemolition (QND) measurement schemes. They separate input from output, impose unidirectional routing of readout signals, and protect the quantum systems from unwanted noise originated by the output chain. However, state-of-the-art, cryogenic circulators and isolators are disadvantageous in scalable superconduc…
▽ More
Nonreciprocal microwave devices play several critical roles in high-fidelity, quantum-nondemolition (QND) measurement schemes. They separate input from output, impose unidirectional routing of readout signals, and protect the quantum systems from unwanted noise originated by the output chain. However, state-of-the-art, cryogenic circulators and isolators are disadvantageous in scalable superconducting quantum processors because they use magnetic materials and strong magnetic fields. Here, we realize an active isolator formed by coupling two nondegenerate Josephson mixers in an interferometric scheme. Nonreciprocity is generated by applying a phase gradient between the same-frequency pumps feeding the Josephson mixers, which play the role of the magnetic field in a Faraday medium. To demonstrate the applicability of this Josephson-based isolator for quantum measurements, we incorporate it into the output line of a superconducting qubit, coupled to a fast resonator and a Purcell filter. We also utilize a wideband, superconducting directional coupler for coupling the readout signals into and out of the qubit-resonator system and a quantum-limited Josephson amplifier for boosting the readout fidelity. By using this novel quantum setup, we demonstrate fast, high-fidelity, QND measurements of the qubit while providing more than 20 dB of protection against amplified noise reflected off the Josephson amplifier.
△ Less
Submitted 16 October, 2018;
originally announced October 2018.
-
Observation of a broadband Lamb shift in an engineered quantum system
Authors:
Matti Silveri,
Shumpei Masuda,
Vasilii Sevriuk,
Kuan Y. Tan,
Máté Jenei,
Eric Hyyppä,
Fabian Hassler,
Matti Partanen,
Jan Goetz,
Russell E. Lake,
Leif Grönberg,
Mikko Möttönen
Abstract:
The shift of energy levels owing to broadband electromagnetic vacuum fluctuations, the Lamb shift, has been pivotal in the development of quantum electrodynamics and in understanding atomic spectra. Currently, small energy shifts in engineered quantum systems are of paramount importance owing to the extreme precision requirements in applications such as quantum computing. However, without a tunabl…
▽ More
The shift of energy levels owing to broadband electromagnetic vacuum fluctuations, the Lamb shift, has been pivotal in the development of quantum electrodynamics and in understanding atomic spectra. Currently, small energy shifts in engineered quantum systems are of paramount importance owing to the extreme precision requirements in applications such as quantum computing. However, without a tunable environment it is challenging to resolve the Lamb shift in its original broadband case. Consequently, the observations in other than atomic systems are limited to environments comprised of narrow-band modes. Here, we observe a broadband Lamb shift in high-quality superconducting resonators, a scenario also accessing static shifts inaccessible in Lamb's experiment. We measure a continuous change of several megahertz in the fundamental resonator frequency by externally tuning the coupling strength of the engineered broadband environment which is based on hybrid normal-metal--superconductor tunnel junctions. Our results may lead to improved control of dissipation in high-quality engineered quantum systems and open new possibilities for studying synthetic open quantum matter using this hybrid experimental platform.
△ Less
Submitted 1 February, 2019; v1 submitted 4 September, 2018;
originally announced September 2018.
-
Overlap junctions for high coherence superconducting qubits
Authors:
X. Wu,
J. L. Long,
H. S. Ku,
R. E. Lake,
M. Bal,
D. P. Pappas
Abstract:
Fabrication of sub-micron Josephson junctions is demonstrated using standard processing techniques for high-coherence, superconducting qubits. These junctions are made in two separate lithography steps with normal-angle evaporation. Most significantly, this work demonstrates that it is possible to achieve high coherence with junctions formed on aluminum surfaces cleaned in situ with Ar milling bef…
▽ More
Fabrication of sub-micron Josephson junctions is demonstrated using standard processing techniques for high-coherence, superconducting qubits. These junctions are made in two separate lithography steps with normal-angle evaporation. Most significantly, this work demonstrates that it is possible to achieve high coherence with junctions formed on aluminum surfaces cleaned in situ with Ar milling before the junction oxidation. This method eliminates the angle-dependent shadow masks typically used for small junctions. Therefore, this is conducive to the implementation of typical methods for improving margins and yield using conventional CMOS processing. The current method uses electron-beam lithography and an additive process to define the top and bottom electrodes. Extension of this work to optical lithography and subtractive processes is discussed.
△ Less
Submitted 24 May, 2017;
originally announced May 2017.
-
Electromagnetically induced transparency in circuit QED with nested polariton states
Authors:
Junling Long,
H. S. Ku,
Xian Wu,
Xiu Gu,
Russell E. Lake,
Mustafa Bal,
Yu-xi Liu,
David P. Pappas
Abstract:
Electromagnetically induced transparency (EIT) is a signature of quantum interference in an atomic three-level system. By driving the dressed cavity-qubit states of a two-dimensional circuit QED system, we generate a set of polariton states in the nesting regime. The lowest three energy levels are utilized to form the $Λ$-type system. EIT is observed and verified by Akaike's information criterion…
▽ More
Electromagnetically induced transparency (EIT) is a signature of quantum interference in an atomic three-level system. By driving the dressed cavity-qubit states of a two-dimensional circuit QED system, we generate a set of polariton states in the nesting regime. The lowest three energy levels are utilized to form the $Λ$-type system. EIT is observed and verified by Akaike's information criterion based testing. Negative group velocities up to $-0.52\pm0.09$ km/s are obtained based on the dispersion relation in the EIT transmission spectrum.
△ Less
Submitted 25 February, 2018; v1 submitted 27 April, 2017;
originally announced April 2017.
-
Qubit gates using hyperbolic secant pulses
Authors:
H. S. Ku,
J. L. Long,
X. Wu,
M. Bal,
R. E. Lake,
Edwin Barnes,
Sophia E. Economou,
D. P. Pappas
Abstract:
It has been known since the early days of quantum mechanics that hyperbolic secant pulses possess the unique property that they can perform cyclic evolution on two-level quantum systems independently of the pulse detuning. More recently, it was realized that they induce detuning- controlled phases without changing state populations. Here, we experimentally demonstrate the properties of hyperbolic…
▽ More
It has been known since the early days of quantum mechanics that hyperbolic secant pulses possess the unique property that they can perform cyclic evolution on two-level quantum systems independently of the pulse detuning. More recently, it was realized that they induce detuning- controlled phases without changing state populations. Here, we experimentally demonstrate the properties of hyperbolic secant pulses on superconducting transmon qubits and contrast them with the more commonly used Gaussian and square waves. We further show that these properties can be exploited to implement phase gates, nominally without exiting the computational subspace. This enables us to demonstrate the first microwave-driven Z-gates with a single control parameter, the detuning.
△ Less
Submitted 5 April, 2017; v1 submitted 3 April, 2017;
originally announced April 2017.
-
Quantum Gates for Propagating Microwave Photons
Authors:
Roope Kokkoniemi,
Tuomas Ollikainen,
Russell E. Lake,
Sakari Saarenpää,
Kuan Yen Tan,
Janne I. Kokkala,
Ceren B. Dağ,
Joonas Govenius,
Mikko Möttönen
Abstract:
We report a generic scheme to implement transmission-type quantum gates for propagating microwave photons, based on a sequence of lumped-element components on transmission lines. By choosing three equidistant superconducting quantum interference devices (SQUIDs) as the components on a single transmission line, we experimentally implement a magnetic-flux-tunable phase shifter and demonstrate that i…
▽ More
We report a generic scheme to implement transmission-type quantum gates for propagating microwave photons, based on a sequence of lumped-element components on transmission lines. By choosing three equidistant superconducting quantum interference devices (SQUIDs) as the components on a single transmission line, we experimentally implement a magnetic-flux-tunable phase shifter and demonstrate that it produces a broad range of phase shifts and full transmission within the experimental uncertainty. Together with previously demonstrated beam splitters, these phase shifters can be utilized to implement arbitrary single-qubit gates. Furthermore, we theoretically show that replacing the SQUIDs by superconducting qubits, the phase shifter can be made strongly nonlinear, thus introducing deterministic photon--photon interactions. These results critically complement the previous demonstrations of on-demand single-photon sources and detectors, and hence pave the way for an all-microwave quantum computer based on propagating photons.
△ Less
Submitted 7 March, 2017;
originally announced March 2017.
-
Strong Cavity-Pseudospin Coupling in Monolayer Transition Metal Dichalcogenides: Spontaneous Spin-Oscillations and Magnetometry
Authors:
Amrit De,
Roger Lake
Abstract:
Strong coupling between the electronic states of monolayer transition metal dichalcogenides (TMDC) such as MoS$_2$, MoSe$_2$, WS$_2$, or WSe$_2$, and a two-dimensional (2D) photonic cavity gives rise to several exotic effects. The Dirac type Hamiltonian for a 2D gapped semiconductor with large spin-orbit coupling facilitates pure Jaynes-Cummings type coupling in the presence of a single mode elect…
▽ More
Strong coupling between the electronic states of monolayer transition metal dichalcogenides (TMDC) such as MoS$_2$, MoSe$_2$, WS$_2$, or WSe$_2$, and a two-dimensional (2D) photonic cavity gives rise to several exotic effects. The Dirac type Hamiltonian for a 2D gapped semiconductor with large spin-orbit coupling facilitates pure Jaynes-Cummings type coupling in the presence of a single mode electric field. The presence of an additional circularly polarized beam of light gives rise to valley and spin dependent cavity-QED properties. The cavity causes the TMDC monolayer to act as an on-chip coherent light source and a spontaneous spin-oscillator. In addition, a TMDC monolayer in a cavity is a sensitive magnetic field sensor for an in-plane magnetic field.
△ Less
Submitted 8 December, 2015;
originally announced December 2015.
