-
Monte Carlo model of distilled remote entanglement between superconducting qubits across optical channels
Authors:
Nicolas Dirnegger,
Moein Malekakhlagh,
Vikesh Siddhu,
Ashutosh Rao,
Chi Xiong,
Muir Kumph,
Jason Orcutt,
Abram Falk
Abstract:
A promising quantum computing architecture comprises modules of superconducting quantum processors linked by optical channels via quantum transducers. To map transducer device performance to system-level channel performance, our model uses Monte Carlo simulations that incorporate 2-to-1 and 3-to-1 entanglement distillation protocols. We show that the Extreme Photon Loss distillation protocol is pa…
▽ More
A promising quantum computing architecture comprises modules of superconducting quantum processors linked by optical channels via quantum transducers. To map transducer device performance to system-level channel performance, our model uses Monte Carlo simulations that incorporate 2-to-1 and 3-to-1 entanglement distillation protocols. We show that the Extreme Photon Loss distillation protocol is particularly high performing and that, even without distillation, present-day transducers are at the threshold of enabling Bell pair distribution with fidelities of 50%. If the next generation of transducers can improve by 3 orders of magnitude in both added noise and efficiency, and increase repetition rates by 50x, then they would allow for remote two-qubit gates achieving 99.7% fidelities at 100 kHz rates. These results set targets for transducers to be ready for deployment into scaled superconducting quantum computers.
△ Less
Submitted 13 March, 2025;
originally announced March 2025.
-
Demonstration of RIP gates in a quantum processor with negligible transverse coupling
Authors:
Muir Kumph,
James Raftery,
Aaron Finck,
John Blair,
April Carniol,
Santino Carnevale,
George A Keefe,
Vincent Arena,
Shawn Hall,
David McKay,
George Stehlik
Abstract:
Here, we report the experimental demonstration of a novel multi-mode linear bus interferometer (LBI) coupler in a six qubit superconducting quantum processor. A key feature of this coupler is an engineered multi-path interference which eliminates transverse coupling between qubits over a wide frequency range. This negligible static coupling is achieved without any flux bias tuning, and greatly red…
▽ More
Here, we report the experimental demonstration of a novel multi-mode linear bus interferometer (LBI) coupler in a six qubit superconducting quantum processor. A key feature of this coupler is an engineered multi-path interference which eliminates transverse coupling between qubits over a wide frequency range. This negligible static coupling is achieved without any flux bias tuning, and greatly reduces the impact of qubit frequency collisions. We achieve good simultaneous single qubit gate operation and low ZZ rates (below 600 Hz) across the device without staggering qubit frequencies, even in cases where qubits are as close as 10 MHz. Multi-qubit interactions are still possible through the coupler using microwave-driven resonator induced phase gates, which we utilize to demonstrate simultaneous two qubit gates with fidelities as high as 99.4%
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
Spectator Errors in Tunable Coupling Architectures
Authors:
D. M. Zajac,
J. Stehlik,
D. L. Underwood,
T. Phung,
J. Blair,
S. Carnevale,
D. Klaus,
G. A. Keefe,
A. Carniol,
M. Kumph,
Matthias Steffen,
O. E. Dial
Abstract:
The addition of tunable couplers to superconducting quantum architectures offers significant advantages for scaling compared to fixed coupling approaches. In principle, tunable couplers allow for exact cancellation of qubit-qubit coupling through the interference of two parallel coupling pathways between qubits. However, stray microwave couplings can introduce additional pathways which complicate…
▽ More
The addition of tunable couplers to superconducting quantum architectures offers significant advantages for scaling compared to fixed coupling approaches. In principle, tunable couplers allow for exact cancellation of qubit-qubit coupling through the interference of two parallel coupling pathways between qubits. However, stray microwave couplings can introduce additional pathways which complicate the interference effect. Here we investigate the primary spectator induced errors of the bus below qubit (BBQ) architecture in a six qubit device. We identify the key design parameters which inhibit ideal cancellation and demonstrate that dynamic cancellation pulses can further mitigate spectator errors.
△ Less
Submitted 25 August, 2021;
originally announced August 2021.
-
Suppressed crosstalk between two-junction superconducting qubits with mode-selective exchange coupling
Authors:
A. D. K. Finck,
S. Carnevale,
D. Klaus,
C. Scerbo,
J. Blair,
T. G. McConkey,
C. Kurter,
A. Carniol,
G. Keefe,
M. Kumph,
O. E. Dial
Abstract:
Fixed-frequency qubits can suffer from always-on interactions that inhibit independent control. Here, we address this issue by experimentally demonstrating a superconducting architecture using qubits that comprise of two capacitively-shunted Josephson junctions connected in series. Historically known as tunable coupling qubits (TCQs), such two-junction qubits support two modes with distinct freque…
▽ More
Fixed-frequency qubits can suffer from always-on interactions that inhibit independent control. Here, we address this issue by experimentally demonstrating a superconducting architecture using qubits that comprise of two capacitively-shunted Josephson junctions connected in series. Historically known as tunable coupling qubits (TCQs), such two-junction qubits support two modes with distinct frequencies and spatial symmetries. By selectively coupling only one type of mode and using the other as our computational basis, we greatly suppress crosstalk between the data modes while permitting all-microwave two-qubit gates.
△ Less
Submitted 22 November, 2021; v1 submitted 24 May, 2021;
originally announced May 2021.
-
Tunable Coupling Architecture for Fixed-frequency Transmons
Authors:
J. Stehlik,
D. M. Zajac,
D. L. Underwood,
T. Phung,
J. Blair,
S. Carnevale,
D. Klaus,
G. A. Keefe,
A. Carniol,
M. Kumph,
Matthias Steffen,
O. E. Dial
Abstract:
Implementation of high-fidelity two-qubit operations is a key ingredient for scalable quantum error correction. In superconducting qubit architectures tunable buses have been explored as a means to higher fidelity gates. However, these buses introduce new pathways for leakage. Here we present a modified tunable bus architecture appropriate for fixed-frequency qubits in which the adiabaticity restr…
▽ More
Implementation of high-fidelity two-qubit operations is a key ingredient for scalable quantum error correction. In superconducting qubit architectures tunable buses have been explored as a means to higher fidelity gates. However, these buses introduce new pathways for leakage. Here we present a modified tunable bus architecture appropriate for fixed-frequency qubits in which the adiabaticity restrictions on gate speed are reduced. We characterize this coupler on a range of two-qubit devices achieving a maximum gate fidelity of $99.85\%$. We further show the calibration is stable over one day.
△ Less
Submitted 19 January, 2021;
originally announced January 2021.
-
An Experimental Study of Shor's Factoring Algorithm on IBM Q
Authors:
Mirko Amico,
Zain H. Saleem,
Muir Kumph
Abstract:
We study the results of a compiled version of Shor's factoring algorithm on the ibmqx5 superconducting chip, for the particular case of $N=15$, $21$ and $35$. The semi-classical quantum Fourier transform is used to implement the algorithm with only a small number of physical qubits and the circuits are designed to reduce the number of gates to the minimum. We use the square of the statistical over…
▽ More
We study the results of a compiled version of Shor's factoring algorithm on the ibmqx5 superconducting chip, for the particular case of $N=15$, $21$ and $35$. The semi-classical quantum Fourier transform is used to implement the algorithm with only a small number of physical qubits and the circuits are designed to reduce the number of gates to the minimum. We use the square of the statistical overlap to give a quantitative measure of the similarity between the experimentally obtained distribution of phases and the predicted theoretical distribution one for different values of the period. This allows us to assign a period to the experimental data without the use of the continued fraction algorithm. A quantitative estimate of the error in our assignment of the period is then given by the overlap coefficient.
△ Less
Submitted 13 May, 2019; v1 submitted 2 March, 2019;
originally announced March 2019.
-
Electric-Field Noise above a Thin Dielectric Layer on Metal Electrodes
Authors:
Muir Kumph,
Carsten Henkel,
Peter Rabl,
Michael Brownnutt,
Rainer Blatt
Abstract:
The electric-field noise above a layered structure composed of a planar metal electrode covered by a thin dielectric is evaluated and it is found that the dielectric film considerably increases the noise level, in proportion to its thickness. Importantly, even a thin (mono) layer of a low-loss dielectric can enhance the noise level by several orders of magnitude compared to the noise above a bare…
▽ More
The electric-field noise above a layered structure composed of a planar metal electrode covered by a thin dielectric is evaluated and it is found that the dielectric film considerably increases the noise level, in proportion to its thickness. Importantly, even a thin (mono) layer of a low-loss dielectric can enhance the noise level by several orders of magnitude compared to the noise above a bare metal. Close to this layered surface, the power spectral density of the electric field varies with the inverse fourth power of the distance to the surface, rather than with the inverse square, as it would above a bare metal surface. Furthermore, compared to a clean metal, where the noise spectrum does not vary with frequency (in the radio-wave and microwave bands), the dielectric layer can generate electric-field noise which scales in inverse proportion to the frequency. For various realistic scenarios, the noise levels predicted from this model are comparable to those observed in trapped-ion experiments. Thus, these findings are of particular importance for the understanding and mitigation of unwanted heating and decoherence in miniaturized ion traps.
△ Less
Submitted 2 November, 2015;
originally announced November 2015.
-
Ion-trap measurements of electric-field noise near surfaces
Authors:
M. Brownnutt,
M. Kumph,
P. Rabl,
R. Blatt
Abstract:
Electric-field noise near surfaces is a common problem in diverse areas of physics, and a limiting factor for many precision measurements. There are multiple mechanisms by which such noise is generated, many of which are poorly understood. Laser-cooled, trapped ions provide one of the most sensitive systems to probe electric-field noise at MHz frequencies and over a distance range 30 - 3000 $μ$m f…
▽ More
Electric-field noise near surfaces is a common problem in diverse areas of physics, and a limiting factor for many precision measurements. There are multiple mechanisms by which such noise is generated, many of which are poorly understood. Laser-cooled, trapped ions provide one of the most sensitive systems to probe electric-field noise at MHz frequencies and over a distance range 30 - 3000 $μ$m from the surface. Over recent years numerous experiments have reported spectral densities of electric-field noise inferred from ion heating-rate measurements and several different theoretical explanations for the observed noise characteristics have been proposed. This paper provides an extensive summary and critical review of electric-field noise measurements in ion traps, and compares these experimental findings with known and conjectured mechanisms for the origin of this noise. This reveals that the presence of multiple noise sources, as well as the different scalings added by geometrical considerations, complicate the interpretation of these results. It is thus the purpose of this review to assess which conclusions can be reasonably drawn from the existing data, and which important questions are still open. In so doing it provides a framework for future investigations of surface-noise processes.
△ Less
Submitted 23 September, 2014;
originally announced September 2014.
-
Cryogenic silicon surface ion trap
Authors:
Michael Niedermayr,
Kirill Lakhmanskiy,
Muir Kumph,
Stefan Partel,
Johannes Edlinger,
Michael Brownnutt,
Rainer Blatt
Abstract:
Trapped ions are pre-eminent candidates for building quantum information processors and quantum simulators. They have been used to demonstrate quantum gates and algorithms, quantum error correction, and basic quantum simulations. However, to realise the full potential of such systems and make scalable trapped-ion quantum computing a reality, there exist a number of practical problems which must be…
▽ More
Trapped ions are pre-eminent candidates for building quantum information processors and quantum simulators. They have been used to demonstrate quantum gates and algorithms, quantum error correction, and basic quantum simulations. However, to realise the full potential of such systems and make scalable trapped-ion quantum computing a reality, there exist a number of practical problems which must be solved. These include tackling the observed high ion-heating rates and creating scalable trap structures which can be simply and reliably produced. Here, we report on cryogenically operated silicon ion traps which can be rapidly and easily fabricated using standard semiconductor technologies. Single $^{40}$Ca$^+$ ions have been trapped and used to characterize the trap operation. Long ion lifetimes were observed with the traps exhibiting heating rates as low as $\dot{\bar{n}}=$ 0.33 phonons/s at an ion-electrode distance of 230 $μ$m. These results open many new avenues to arrays of micro-fabricated ion traps.
△ Less
Submitted 1 May, 2015; v1 submitted 20 March, 2014;
originally announced March 2014.
-
Operation of a planar-electrode ion-trap array with adjustable RF electrodes
Authors:
Muir Kumph,
Philip Holz,
Kirsten Langer,
Martin Meraner,
Michael Niedermayr,
Michael Brownnutt,
Rainer Blatt
Abstract:
One path to realizing systems of trapped atomic ions suitable for large-scale quantum computing and simulation is to create a two-dimensional array of ion traps. Interactions between nearest-neighbouring ions could then be turned on and off by tuning the ions' relative positions and frequencies. We demonstrate and characterize the operation of a planar-electrode ion-trap array. Driving the trap wi…
▽ More
One path to realizing systems of trapped atomic ions suitable for large-scale quantum computing and simulation is to create a two-dimensional array of ion traps. Interactions between nearest-neighbouring ions could then be turned on and off by tuning the ions' relative positions and frequencies. We demonstrate and characterize the operation of a planar-electrode ion-trap array. Driving the trap with a network of phase-locked radio-frequency (RF) resonators which provide independently variable voltage amplitudes we vary the position and motional frequency of a 40Ca+ ion in two dimensions within the trap array. With suitable miniaturization of the trap structure, this provides a viable architecture for large-scale quantum simulations.
△ Less
Submitted 16 July, 2015; v1 submitted 4 February, 2014;
originally announced February 2014.
-
Compact RF resonator for cryogenic ion traps
Authors:
D. Gandolfi,
M. Niedermayr,
M. Kumph,
M. Brownnutt,
R. Blatt
Abstract:
We report on the investigation and implementation of a lumped-component, radio-frequency resonator used in a cryogenic vacuum environment to drive an ion trap. The resonator was required to achieve the voltages necessary to trap (about 100 V), while dissipating as little power as possible (< 250 mW). Ultimately a voltage gain of 100 was measured at 5.7 K. Single calcium ions were confined in a tra…
▽ More
We report on the investigation and implementation of a lumped-component, radio-frequency resonator used in a cryogenic vacuum environment to drive an ion trap. The resonator was required to achieve the voltages necessary to trap (about 100 V), while dissipating as little power as possible (< 250 mW). Ultimately a voltage gain of 100 was measured at 5.7 K. Single calcium ions were confined in a trap driven by this device, providing proof of successful resonator operation at low temperature.
△ Less
Submitted 29 April, 2012; v1 submitted 23 April, 2012;
originally announced April 2012.
-
Interferometric thermometry of a single sub-Doppler cooled atom
Authors:
L. Slodička,
G. Hétet,
N. Röck,
S. Gerber,
P. Schindler,
M. Kumph,
M. Hennrich,
R. Blatt
Abstract:
Efficient self-interference of single-photons emitted by a sideband-cooled Barium ion is demonstrated. First, the technical tools for performing efficient coupling to the quadrupolar transition of a single $^{138}$Ba$^{+}$ ion are presented. We show efficient Rabi oscillations of the internal state of the ion using a highly stabilized 1.76 $μm$ fiber laser resonant with the S$_{1/2}$-D$_{5/2}$ tra…
▽ More
Efficient self-interference of single-photons emitted by a sideband-cooled Barium ion is demonstrated. First, the technical tools for performing efficient coupling to the quadrupolar transition of a single $^{138}$Ba$^{+}$ ion are presented. We show efficient Rabi oscillations of the internal state of the ion using a highly stabilized 1.76 $μm$ fiber laser resonant with the S$_{1/2}$-D$_{5/2}$ transition. We then show sideband cooling of the ion's motional modes and use it as a means to enhance the interference contrast of the ion with its mirror-image to up to 90%. Last, we measure the dependence of the self-interference contrast on the mean phonon number, thereby demonstrating the potential of the set-up for single-atom thermometry close to the motional ground state.
△ Less
Submitted 4 April, 2012; v1 submitted 21 February, 2012;
originally announced February 2012.
-
Two-Dimensional Arrays of RF Ion Traps with Addressable Interactions
Authors:
Muir Kumph,
Michael Brownnutt,
Rainer Blatt
Abstract:
We describe the advantages of 2-dimensional, addressable arrays of spherical Paul traps. They would provide for the ability to address and tailor the interaction strengths of trapped objects in 2D and could establish a valuable new tool for quantum information processing. Simulations of trapping ions are compared to first tests using printed circuit board trap arrays loaded with dust particles. Pa…
▽ More
We describe the advantages of 2-dimensional, addressable arrays of spherical Paul traps. They would provide for the ability to address and tailor the interaction strengths of trapped objects in 2D and could establish a valuable new tool for quantum information processing. Simulations of trapping ions are compared to first tests using printed circuit board trap arrays loaded with dust particles. Pair-wise interactions in the array are addressed by means of an adjustable radio-frequency (RF) electrode shared between trapping sites. By attenuating this RF electrode potential, neighboring pairs of trapped objects have their interaction strength increase and are moved closer to one another. In the limit of the adjustable electrode being held at RF ground, the two formerly spherical traps are merged into one linear Paul trap.
△ Less
Submitted 30 June, 2011; v1 submitted 28 March, 2011;
originally announced March 2011.
