-
Quantum dynamics of semiconductor quantum dot Josephson junctions
Authors:
Utkan Güngördü,
Rusko Ruskov,
Silas Hoffman,
Kyle Serniak,
Andrew J. Kerman,
Charles Tahan
Abstract:
Josephson junctions constructed from superconductor-semiconductor-superconductor heterostructures have been used to realize a variety of voltage-tunable superconducting quantum devices, including qubits and parametric amplifiers. To date theoretical descriptions of these systems have been restricted to small quantum fluctuations of the junction phase, making them inapplicable to many experiments.…
▽ More
Josephson junctions constructed from superconductor-semiconductor-superconductor heterostructures have been used to realize a variety of voltage-tunable superconducting quantum devices, including qubits and parametric amplifiers. To date theoretical descriptions of these systems have been restricted to small quantum fluctuations of the junction phase, making them inapplicable to many experiments. In this work we relax this, employing a path-integral formulation where the phase quantum dynamics is obtained self-consistently from an underlying many-body formalism. Our method recovers previously-known results for small phase fluctuations, and predicts new effects outside of that limit: (i) system capacitances undergo a gate-voltage-dependent renormalization; and (ii) an additional charge offset appears for asymmetric junctions. Our main results can be summarized in terms of a single-particle Hamiltonian, which can be directly compared to that of an ordinary Josephson junction. This more general theory could be a first step towards designing new quantum devices that go qualitatively beyond voltage-tunable variants of previously-known circuits.
△ Less
Submitted 2 June, 2025; v1 submitted 15 February, 2024;
originally announced February 2024.
-
Demonstration of tunable three-body interactions between superconducting qubits
Authors:
Tim Menke,
William P. Banner,
Thomas R. Bergamaschi,
Agustin Di Paolo,
Antti Vepsäläinen,
Steven J. Weber,
Roni Winik,
Alexander Melville,
Bethany M. Niedzielski,
Danna Rosenberg,
Kyle Serniak,
Mollie E. Schwartz,
Jonilyn L. Yoder,
Alán Aspuru-Guzik,
Simon Gustavsson,
Jeffrey A. Grover,
Cyrus F. Hirjibehedin,
Andrew J. Kerman,
William D. Oliver
Abstract:
Nonpairwise multi-qubit interactions present a useful resource for quantum information processors. Their implementation would facilitate more efficient quantum simulations of molecules and combinatorial optimization problems, and they could simplify error suppression and error correction schemes. Here we present a superconducting circuit architecture in which a coupling module mediates 2-local and…
▽ More
Nonpairwise multi-qubit interactions present a useful resource for quantum information processors. Their implementation would facilitate more efficient quantum simulations of molecules and combinatorial optimization problems, and they could simplify error suppression and error correction schemes. Here we present a superconducting circuit architecture in which a coupling module mediates 2-local and 3-local interactions between three flux qubits by design. The system Hamiltonian is estimated via multi-qubit pulse sequences that implement Ramsey-type interferometry between all neighboring excitation manifolds in the system. The 3-local interaction is coherently tunable over several MHz via the coupler flux biases and can be turned off, which is important for applications in quantum annealing, analog quantum simulation, and gate-model quantum computation.
△ Less
Submitted 9 May, 2022;
originally announced May 2022.
-
Superconducting-semiconducting voltage-tunable qubits in the third dimension
Authors:
Thomas M. Hazard,
Andrew J. Kerman,
Kyle Serniak,
Charles Tahan
Abstract:
We propose superconducting-semiconducting (super-semi) qubit and coupler designs based on high-quality, compact through-silicon vias (TSVs). An interposer "probe" wafer containing TSVs is used to contact a sample wafer with, for example, a superconductor-proximitized, epitaxially-grown, germanium quantum well. By utilizing the capacitance of the probe wafer TSVs, the majority of the electric field…
▽ More
We propose superconducting-semiconducting (super-semi) qubit and coupler designs based on high-quality, compact through-silicon vias (TSVs). An interposer "probe" wafer containing TSVs is used to contact a sample wafer with, for example, a superconductor-proximitized, epitaxially-grown, germanium quantum well. By utilizing the capacitance of the probe wafer TSVs, the majority of the electric field in the qubits is pulled away from lossy regions in the semiconducting wafer. Through simulations, we find that the probe wafer can reduce the qubit's electric field participation in the sample wafer by an order of magnitude for thin substrates and remains small even when the epitaxial layer thickness approaches 100 $μ$m. We also show how this scheme is extensible to multi-qubit systems which have tunable qubit-qubit couplings without magnetic fields. This approach shrinks the on-chip footprint of voltage-tunable superconducting qubits and promises to accelerate the understanding of super-semi heterostructures in a variety of systems.
△ Less
Submitted 11 March, 2022;
originally announced March 2022.
-
Distinguishing multi-spin interactions from lower-order effects
Authors:
Thomas R. Bergamaschi,
Tim Menke,
William P. Banner,
Agustin Di Paolo,
Steven J. Weber,
Cyrus F. Hirjibehedin,
Andrew J. Kerman,
William D. Oliver
Abstract:
Multi-spin interactions can be engineered with artificial quantum spins. However, it is challenging to verify such interactions experimentally. Here we describe two methods to characterize the $n$-local coupling of $n$ spins. First, we analyze the variation of the transition energy of the static system as a function of local spin fields. Standard measurement techniques are employed to distinguish…
▽ More
Multi-spin interactions can be engineered with artificial quantum spins. However, it is challenging to verify such interactions experimentally. Here we describe two methods to characterize the $n$-local coupling of $n$ spins. First, we analyze the variation of the transition energy of the static system as a function of local spin fields. Standard measurement techniques are employed to distinguish $n$-local interactions between up to five spins from lower-order contributions in the presence of noise and spurious fields and couplings. Second, we show a detection technique that relies on time dependent driving of the coupling term. Generalizations to larger system sizes are analyzed for both static and dynamic detection methods, and we find that the dynamic method is asymptotically optimal when increasing the system size. The proposed methods enable robust exploration of multi-spin interactions across a broad range of both coupling strengths and qubit modalities.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
Demonstration of long-range correlations via susceptibility measurements in a one-dimensional superconducting Josephson spin chain
Authors:
Daniel M. Tennant,
Xi Dai,
Antonio J. Martinez,
Robbyn Trappen,
Denis Melanson,
M A. Yurtalan,
Yongchao Tang,
Salil Bedkihal,
Rui Yang,
Sergei Novikov,
Jeffery A. Grover,
Steven M. Disseler,
James I. Basham,
Rabindra Das,
David K. Kim,
Alexander J. Melville,
Bethany M. Niedzielski,
Steven J. Weber,
Jonilyn L. Yoder,
Andrew J. Kerman,
Evgeny Mozgunov,
Daniel A. Lidar,
Adrian Lupascu
Abstract:
Spin chains have long been considered an effective medium for long-range interactions, entanglement generation, and quantum state transfer. In this work, we explore the properties of a spin chain implemented with superconducting flux circuits, designed to act as a connectivity medium between two superconducting qubits. The susceptibility of the chain is probed and shown to support long-range, cros…
▽ More
Spin chains have long been considered an effective medium for long-range interactions, entanglement generation, and quantum state transfer. In this work, we explore the properties of a spin chain implemented with superconducting flux circuits, designed to act as a connectivity medium between two superconducting qubits. The susceptibility of the chain is probed and shown to support long-range, cross chain correlations. In addition, interactions between the two end qubits, mediated by the coupler chain, are demonstrated. This work has direct applicability in near term quantum annealing processors as a means of generating long-range, coherent coupling between qubits.
△ Less
Submitted 9 November, 2021; v1 submitted 8 November, 2021;
originally announced November 2021.
-
Fabrication of superconducting through-silicon vias
Authors:
Justin L. Mallek,
Donna-Ruth W. Yost,
Danna Rosenberg,
Jonilyn L. Yoder,
Gregory Calusine,
Matt Cook,
Rabindra Das,
Alexandra Day,
Evan Golden,
David K. Kim,
Jeffery Knecht,
Bethany M. Niedzielski,
Mollie Schwartz,
Arjan Sevi,
Corey Stull,
Wayne Woods,
Andrew J. Kerman,
William D. Oliver
Abstract:
Increasing circuit complexity within quantum systems based on superconducting qubits necessitates high connectivity while retaining qubit coherence. Classical micro-electronic systems have addressed interconnect density challenges by using 3D integration with interposers containing through-silicon vias (TSVs), but extending these integration techniques to superconducting quantum systems is challen…
▽ More
Increasing circuit complexity within quantum systems based on superconducting qubits necessitates high connectivity while retaining qubit coherence. Classical micro-electronic systems have addressed interconnect density challenges by using 3D integration with interposers containing through-silicon vias (TSVs), but extending these integration techniques to superconducting quantum systems is challenging. Here, we discuss our approach for realizing high-aspect-ratio superconducting TSVs\textemdash 10 $μ$m wide by 20 $μ$m long by 200 $μ$m deep\textemdash with densities of 100 electrically isolated TSVs per square millimeter. We characterize the DC and microwave performance of superconducting TSVs at cryogenic temperatures and demonstrate superconducting critical currents greater than 20 mA. These high-aspect-ratio, high critical current superconducting TSVs will enable high-density vertical signal routing within superconducting quantum processors.
△ Less
Submitted 15 March, 2021;
originally announced March 2021.
-
Efficient numerical simulation of complex Josephson quantum circuits
Authors:
Andrew J. Kerman
Abstract:
Building on the established methods for superconducting circuit quantization, we present a new theoretical framework for approximate numerical simulation of Josephson quantum circuits. Simulations based on this framework provide access to a degree of complexity and circuit size heretofore inaccessible to quantitative analysis, including fundamentally new kinds of superconducting quantum devices. T…
▽ More
Building on the established methods for superconducting circuit quantization, we present a new theoretical framework for approximate numerical simulation of Josephson quantum circuits. Simulations based on this framework provide access to a degree of complexity and circuit size heretofore inaccessible to quantitative analysis, including fundamentally new kinds of superconducting quantum devices. This capability is made possible by two improvements over previous methods: first, physically-motivated choices for the canonical circuit modes and physical basis states which allow a highly-efficient matrix representation; and second, an iterative method in which subsystems are diagonalized separately and then coupled together, at increasing size scales with each iteration, allowing diagonalization of Hamiltonians in extremely large Hilbert spaces to be approximated using a sequence of diagonalizations in much smaller spaces.
△ Less
Submitted 16 December, 2020; v1 submitted 28 October, 2020;
originally announced October 2020.
-
A superconducting circuit realization of combinatorial gauge symmetry
Authors:
Claudio Chamon,
Dmitry Green,
Andrew J. Kerman
Abstract:
We propose a superconducting quantum circuit based on a general symmetry principle -- combinatorial gauge symmetry -- designed to emulate topologically-ordered quantum liquids and serve as a foundation for the construction of topological qubits. The proposed circuit exhibits rich features: in the classical limit of large capacitances its ground state consists of two superimposed loop structures; o…
▽ More
We propose a superconducting quantum circuit based on a general symmetry principle -- combinatorial gauge symmetry -- designed to emulate topologically-ordered quantum liquids and serve as a foundation for the construction of topological qubits. The proposed circuit exhibits rich features: in the classical limit of large capacitances its ground state consists of two superimposed loop structures; one is a crystal of small loops containing disordered $U(1)$ degrees of freedom, and the other is a gas of loops of all sizes associated to $\mathbb{Z}_2$ topological order. We show that these classical results carry over to the quantum case, where phase fluctuations arise from the presence of finite capacitances, yielding ${\mathbb Z}_2$ quantum topological order. A key feature of the exact gauge symmetry is that amplitudes connecting different ${\mathbb Z}_2$ loop states arise from paths having zero classical energy cost. As a result, these amplitudes are controlled by dimensional confinement rather than tunneling through energy barriers. We argue that this effect may lead to larger energy gaps than previous proposals which are limited by such barriers, potentially making it more likely for a topological phase to be experimentally observable. Finally, we discuss how our superconducting circuit realization of combinatorial gauge symmetry can be implemented in practice.
△ Less
Submitted 8 June, 2021; v1 submitted 17 June, 2020;
originally announced June 2020.
-
Solid-state qubits integrated with superconducting through-silicon vias
Authors:
Donna-Ruth W. Yost,
Mollie E. Schwartz,
Justin Mallek,
Danna Rosenberg,
Corey Stull,
Jonilyn L. Yoder,
Greg Calusine,
Matt Cook,
Rabindra Das,
Alexandra L. Day,
Evan B. Golden,
David K. Kim,
Alexander Melville,
Bethany M. Niedzielski,
Wayne Woods,
Andrew J. Kerman,
Willam D. Oliver
Abstract:
As superconducting qubit circuits become more complex, addressing a large array of qubits becomes a challenging engineering problem. Dense arrays of qubits benefit from, and may require, access via the third dimension to alleviate interconnect crowding. Through-silicon vias (TSVs) represent a promising approach to three-dimensional (3D) integration in superconducting qubit arrays -- provided they…
▽ More
As superconducting qubit circuits become more complex, addressing a large array of qubits becomes a challenging engineering problem. Dense arrays of qubits benefit from, and may require, access via the third dimension to alleviate interconnect crowding. Through-silicon vias (TSVs) represent a promising approach to three-dimensional (3D) integration in superconducting qubit arrays -- provided they are compact enough to support densely-packed qubit systems without compromising qubit performance or low-loss signal and control routing. In this work, we demonstrate the integration of superconducting, high-aspect ratio TSVs -- 10 $μ$m wide by 20 $μ$m long by 200 $μ$m deep -- with superconducting qubits. We utilize TSVs for baseband control and high-fidelity microwave readout of qubits using a two-chip, bump-bonded architecture. We also validate the fabrication of qubits directly upon the surface of a TSV-integrated chip. These key 3D integration milestones pave the way for the control and readout of high-density superconducting qubit arrays using superconducting TSVs.
△ Less
Submitted 29 September, 2020; v1 submitted 23 December, 2019;
originally announced December 2019.
-
Automated discovery of superconducting circuits and its application to 4-local coupler design
Authors:
Tim Menke,
Florian Häse,
Simon Gustavsson,
Andrew J. Kerman,
William D. Oliver,
Alán Aspuru-Guzik
Abstract:
Superconducting circuits have emerged as a promising platform to build quantum processors. The challenge of designing a circuit is to compromise between realizing a set of performance metrics and reducing circuit complexity and noise sensitivity. At the same time, one needs to explore a large design space, and computational approaches often yield long simulation times. Here we automate the circuit…
▽ More
Superconducting circuits have emerged as a promising platform to build quantum processors. The challenge of designing a circuit is to compromise between realizing a set of performance metrics and reducing circuit complexity and noise sensitivity. At the same time, one needs to explore a large design space, and computational approaches often yield long simulation times. Here we automate the circuit design task using SCILLA, a software for automated discovery of superconducting circuits. SCILLA performs a parallelized, closed-loop optimization to design circuit diagrams that match pre-defined properties such as spectral features and noise sensitivities. We employ it to discover 4-local couplers for superconducting flux qubits and identify a circuit that outperforms an existing proposal with similar circuit structure in terms of coupling strength and noise resilience for experimentally accessible parameters. This work demonstrates how automated discovery can facilitate the design of complex circuit architectures for quantum information processing.
△ Less
Submitted 20 March, 2020; v1 submitted 6 December, 2019;
originally announced December 2019.
-
Superconducting qubit circuit emulation of a vector spin-1/2
Authors:
Andrew J. Kerman
Abstract:
We propose a superconducting qubit circuit that can fully emulate a quantum vector spin-1/2, with an effective dipole moment having three independent components whose operators obey the commutation relations of a vector angular momentum in the computational subspace. Each component couples to an independently-controllable external bias, emulating the Zeeman effect due to a fictitious, vector magne…
▽ More
We propose a superconducting qubit circuit that can fully emulate a quantum vector spin-1/2, with an effective dipole moment having three independent components whose operators obey the commutation relations of a vector angular momentum in the computational subspace. Each component couples to an independently-controllable external bias, emulating the Zeeman effect due to a fictitious, vector magnetic field, and all three of these vector components remain relatively constant over a broad range of emulated total fields around zero. This capability, combined with established techniques for qubit coupling, should enable for the first time the direct hardware emulation of nearly arbitrary quantum spin-1/2 systems, including the canonical Heisenberg model. Furthermore, it would constitute a crucial step both towards realizing the full potential of quantum annealing, as well as exploring important quantum information processing capabilities that have so far been inaccessible to available hardware, such as quantum error suppression, Hamiltonian and holonomic quantum computing, and adiabatic quantum chemistry.
△ Less
Submitted 23 January, 2019; v1 submitted 2 October, 2018;
originally announced October 2018.
-
Distinguishing coherent and thermal photon noise in a circuit QED system
Authors:
Fei Yan,
Dan Campbell,
Philip Krantz,
Morten Kjaergaard,
David Kim,
Jonilyn L. Yoder,
David Hover,
Adam Sears,
Andrew J. Kerman,
Terry P. Orlando,
Simon Gustavsson,
William D. Oliver
Abstract:
In the cavity-QED architecture, photon number fluctuations from residual cavity photons cause qubit dephasing due to the AC Stark effect. These unwanted photons originate from a variety of sources, such as thermal radiation, leftover measurement photons, and crosstalk. Using a capacitively-shunted flux qubit coupled to a transmission line cavity, we demonstrate a method that identifies and disting…
▽ More
In the cavity-QED architecture, photon number fluctuations from residual cavity photons cause qubit dephasing due to the AC Stark effect. These unwanted photons originate from a variety of sources, such as thermal radiation, leftover measurement photons, and crosstalk. Using a capacitively-shunted flux qubit coupled to a transmission line cavity, we demonstrate a method that identifies and distinguishes coherent and thermal photons based on noise-spectral reconstruction from time-domain spin-locking relaxometry. Using these measurements, we attribute the limiting dephasing source in our system to thermal photons, rather than coherent photons. By improving the cryogenic attenuation on lines leading to the cavity, we successfully suppress residual thermal photons and achieve $T_1$-limited spin-echo decay time. The spin-locking noise spectroscopy technique can readily be applied to other qubit modalities for identifying general asymmetric non-classical noise spectra.
△ Less
Submitted 1 January, 2018;
originally announced January 2018.
-
3D integrated superconducting qubits
Authors:
D. Rosenberg,
D. Kim,
R. Das,
D. Yost,
S. Gustavsson,
D. Hover,
P. Krantz,
A. Melville,
L. Racz,
G. O. Samach,
S. J. Weber,
F. Yan,
J. Yoder,
A. J. Kerman,
W. D. Oliver
Abstract:
As the field of superconducting quantum computing advances from the few-qubit stage to larger-scale processors, qubit addressability and extensibility will necessitate the use of 3D integration and packaging. While 3D integration is well-developed for commercial electronics, relatively little work has been performed to determine its compatibility with high-coherence solid-state qubits. Of particul…
▽ More
As the field of superconducting quantum computing advances from the few-qubit stage to larger-scale processors, qubit addressability and extensibility will necessitate the use of 3D integration and packaging. While 3D integration is well-developed for commercial electronics, relatively little work has been performed to determine its compatibility with high-coherence solid-state qubits. Of particular concern, qubit coherence times can be suppressed by the requisite processing steps and close proximity of another chip. In this work, we use a flip-chip process to bond a chip with superconducting flux qubits to another chip containing structures for qubit readout and control. We demonstrate that high qubit coherence ($T_1$, $T_{2,\rm{echo}} > 20\,μ$s) is maintained in a flip-chip geometry in the presence of galvanic, capacitive, and inductive coupling between the chips.
△ Less
Submitted 19 June, 2017; v1 submitted 13 June, 2017;
originally announced June 2017.
-
Coherent coupled qubits for quantum annealing
Authors:
Steven J. Weber,
Gabriel O. Samach,
David Hover,
Simon Gustavsson,
David K. Kim,
Alexander Melville,
Danna Rosenberg,
Adam P. Sears,
Fei Yan,
Jonilyn L. Yoder,
William D. Oliver,
Andrew J. Kerman
Abstract:
Quantum annealing is an optimization technique which potentially leverages quantum tunneling to enhance computational performance. Existing quantum annealers use superconducting flux qubits with short coherence times, limited primarily by the use of large persistent currents $I_\mathrm{p}$. Here, we examine an alternative approach, using qubits with smaller $I_\mathrm{p}$ and longer coherence time…
▽ More
Quantum annealing is an optimization technique which potentially leverages quantum tunneling to enhance computational performance. Existing quantum annealers use superconducting flux qubits with short coherence times, limited primarily by the use of large persistent currents $I_\mathrm{p}$. Here, we examine an alternative approach, using qubits with smaller $I_\mathrm{p}$ and longer coherence times. We demonstrate tunable coupling, a basic building block for quantum annealing, between two flux qubits with small ($\sim 50~\mathrm{nA}$) persistent currents. Furthermore, we characterize qubit coherence as a function of coupler setting and investigate the effect of flux noise in the coupler loop on qubit coherence. Our results provide insight into the available design space for next-generation quantum annealers with improved coherence.
△ Less
Submitted 6 June, 2017; v1 submitted 23 January, 2017;
originally announced January 2017.
-
Suppressing relaxation in superconducting qubits by quasiparticle pumping
Authors:
Simon Gustavsson,
Fei Yan,
Gianluigi Catelani,
Jonas Bylander,
Archana Kamal,
Jeffrey Birenbaum,
David Hover,
Danna Rosenberg,
Gabriel Samach,
Adam P. Sears,
Steven J. Weber,
Jonilyn L. Yoder,
John Clarke,
Andrew J. Kerman,
Fumiki Yoshihara,
Yasunobu Nakamura,
Terry P. Orlando,
William D. Oliver
Abstract:
Dynamical error suppression techniques are commonly used to improve coherence in quantum systems. They reduce dephasing errors by applying control pulses designed to reverse erroneous coherent evolution driven by environmental noise. However, such methods cannot correct for irreversible processes such as energy relaxation. In this work, we investigate a complementary, stochastic approach to reduci…
▽ More
Dynamical error suppression techniques are commonly used to improve coherence in quantum systems. They reduce dephasing errors by applying control pulses designed to reverse erroneous coherent evolution driven by environmental noise. However, such methods cannot correct for irreversible processes such as energy relaxation. In this work, we investigate a complementary, stochastic approach to reducing errors: instead of deterministically reversing the unwanted qubit evolution, we use control pulses to shape the noise environment dynamically. In the context of superconducting qubits, we implement a pumping sequence to reduce the number of unpaired electrons (quasiparticles) in close proximity to the device. We report a 70% reduction in the quasiparticle density, resulting in a threefold enhancement in qubit relaxation times, and a comparable reduction in coherence variability.
△ Less
Submitted 26 December, 2016;
originally announced December 2016.
-
The Flux Qubit Revisited to Enhance Coherence and Reproducibility
Authors:
F. Yan,
S. Gustavsson,
A. Kamal,
J. Birenbaum,
A. P. Sears,
D. Hover,
D. Rosenberg,
G. Samach,
T. J. Gudmundsen,
J. L. Yoder,
T. P. Orlando,
J. Clarke,
A. J. Kerman,
W. D. Oliver
Abstract:
The scalable application of quantum information science will stand on reproducible and controllable high-coherence quantum bits (qubits). Here, we revisit the design and fabrication of the superconducting flux qubit, achieving a planar device with broad frequency tunability, strong anharmonicity, high reproducibility, and relaxation times in excess of $40\,μ$s at its flux-insensitive point. Qubit…
▽ More
The scalable application of quantum information science will stand on reproducible and controllable high-coherence quantum bits (qubits). Here, we revisit the design and fabrication of the superconducting flux qubit, achieving a planar device with broad frequency tunability, strong anharmonicity, high reproducibility, and relaxation times in excess of $40\,μ$s at its flux-insensitive point. Qubit relaxation times $T_1$ across 22 qubits are consistently matched with a single model involving resonator loss, ohmic charge noise, and 1/f flux noise, a noise source previously considered primarily in the context of dephasing. We furthermore demonstrate that qubit dephasing at the flux-insensitive point is dominated by residual thermal photons in the readout resonator. The resulting photon shot noise is mitigated using a dynamical decoupling protocol, resulting in $T_2\approx 85\,μ$s, approximately the $2T_1$ limit. In addition to realizing an improved flux qubit, our results uniquely identify photon shot noise as limiting $T_2$ in contemporary qubits based on transverse qubit-resonator interaction.
△ Less
Submitted 4 November, 2016; v1 submitted 25 August, 2015;
originally announced August 2015.
-
Towards Outperforming Classical Algorithms with Analog Quantum Simulators
Authors:
Sarah Mostame,
Joonsuk Huh,
Christoph Kreisbeck,
Andrew J Kerman,
Takatoshi Fujita,
Alexander Eisfeld,
Alán Aspuru-Guzik
Abstract:
With quantum computers being out of reach for now, quantum simulators are the alternative devices for efficient and more exact simulation of problems that are challenging on conventional computers. Quantum simulators are classified into analog and digital, with the possibility of constructing "hybrid" simulators by combining both techniques. In this paper, we focus on analog quantum simulators of…
▽ More
With quantum computers being out of reach for now, quantum simulators are the alternative devices for efficient and more exact simulation of problems that are challenging on conventional computers. Quantum simulators are classified into analog and digital, with the possibility of constructing "hybrid" simulators by combining both techniques. In this paper, we focus on analog quantum simulators of open quantum systems and address the limit that they can beat classical computers. In particular, as an example, we discuss simulation of the chlorosome light-harvesting antenna from green sulfur bacteria with over 250 phonon modes coupled to each electronic state. Furthermore, we propose physical setups that can be used to reproduce the quantum dynamics of a standard and multiple-mode Holstein model. The proposed scheme is based on currently available technology of superconducting circuits consist of flux qubits and quantum oscillators.
△ Less
Submitted 30 January, 2015;
originally announced February 2015.
-
Heralding efficiency and correlated-mode coupling of near-IR fiber coupled photon pairs
Authors:
P. Ben Dixon,
Danna Rosenberg,
Veronika Stelmakh,
Matthew E. Grein,
Ryan S. Bennink,
Eric A. Dauler,
Andrew J. Kerman,
Richard J. Molnar,
Franco N. C. Wong
Abstract:
We report on a systematic experimental study of heralding efficiency and generation rate of telecom-band infrared photon pairs generated by spontaneous parametric down-conversion and coupled to single mode optical fibers. We define the correlated-mode coupling efficiency--an inherent source efficiency--and explain its relation to heralding efficiency. For our experiment, we developed a reconfigura…
▽ More
We report on a systematic experimental study of heralding efficiency and generation rate of telecom-band infrared photon pairs generated by spontaneous parametric down-conversion and coupled to single mode optical fibers. We define the correlated-mode coupling efficiency--an inherent source efficiency--and explain its relation to heralding efficiency. For our experiment, we developed a reconfigurable computer controlled pump-beam and collection-mode optical apparatus which we used to measure the generation rate and correlated-mode coupling efficiency. The use of low-noise, high-efficiency superconducting nanowire single-photon detectors in this setup allowed us to explore focus configurations with low overall photon flux. The measured data agree well with theory and we demonstrated a correlated-mode coupling efficiency of $97 \pm 2\%$, which is the highest efficiency yet achieved for this type of system. These results confirm theoretical treatments and demonstrate that very high overall heralding efficiencies can, in principle, be achieved in quantum optical systems. It is expected that these results and techniques will be widely incorporated into future systems that require, or benefit from, a high heralding efficiency.
△ Less
Submitted 25 September, 2014; v1 submitted 31 July, 2014;
originally announced July 2014.
-
Quantum information processing using quasiclassical electromagnetic interactions between qubits and electrical resonators
Authors:
Andrew J. Kerman
Abstract:
Electrical resonators are widely used in quantum information processing, by engineering an electromagnetic interaction with qubits based on real or virtual exchange of microwave photons. This interaction relies on strong coupling between the qubits' transition dipole moments and the vacuum fluctuations of the resonator in the same manner as cavity QED, and has consequently come to be called "circu…
▽ More
Electrical resonators are widely used in quantum information processing, by engineering an electromagnetic interaction with qubits based on real or virtual exchange of microwave photons. This interaction relies on strong coupling between the qubits' transition dipole moments and the vacuum fluctuations of the resonator in the same manner as cavity QED, and has consequently come to be called "circuit QED" (cQED). Great strides in the control of quantum information have already been made experimentally using this idea. However, the central role played by photon exchange induced by quantum fluctuations in cQED does result in some characteristic limitations. In this paper, we discuss an alternative method for coupling qubits electromagnetically via a resonator, in which no photons are exchanged, and where the resonator need not have strong quantum fluctuations. Instead, the interaction can be viewed in terms of classical, effective "forces" exerted by the qubits on the resonator, and the resulting resonator dynamics used to produce qubit entanglement are purely classical in nature. We show how this type of interaction is similar to that encountered in the manipulation of atomic ion qubits, and we exploit this analogy to construct two-qubit entangling operations that are largely insensitive to thermal or other noise in the resonator, and to its quality factor. These operations are also extensible to larger numbers of qubits, allowing interactions to be selectively generated among any desired subset of those coupled to a single resonator. Our proposal is potentially applicable to a variety of physical qubit modalities, including superconducting and semiconducting solid-state qubits, trapped molecular ions, and possibly even electron spins in solids.
△ Less
Submitted 24 June, 2013; v1 submitted 13 December, 2012;
originally announced December 2012.
-
Loading of a surface-electrode ion trap from a remote, precooled source
Authors:
Jeremy M. Sage,
Andrew J. Kerman,
John Chiaverini
Abstract:
We demonstrate loading of ions into a surface-electrode trap (SET) from a remote, laser-cooled source of neutral atoms. We first cool and load $\sim$ $10^6$ neutral $^{88}$Sr atoms into a magneto-optical trap from an oven that has no line of sight with the SET. The cold atoms are then pushed with a resonant laser into the trap region where they are subsequently photoionized and trapped in an SET o…
▽ More
We demonstrate loading of ions into a surface-electrode trap (SET) from a remote, laser-cooled source of neutral atoms. We first cool and load $\sim$ $10^6$ neutral $^{88}$Sr atoms into a magneto-optical trap from an oven that has no line of sight with the SET. The cold atoms are then pushed with a resonant laser into the trap region where they are subsequently photoionized and trapped in an SET operated at a cryogenic temperature of 4.6 K. We present studies of the loading process and show that our technique achieves ion loading into a shallow (15 meV depth) trap at rates as high as 125 ions/s while drastically reducing the amount of metal deposition on the trap surface as compared with direct loading from a hot vapor. Furthermore, we note that due to multiple stages of isotopic filtering in our loading process, this technique has the potential for enhanced isotopic selectivity over other loading methods. Rapid loading from a clean, isotopically pure, and precooled source may enable scalable quantum information processing with trapped ions in large, low-depth surface trap arrays that are not amenable to loading from a hot atomic beam.
△ Less
Submitted 20 July, 2012; v1 submitted 29 May, 2012;
originally announced May 2012.
-
Quantum simulator of an open quantum system using superconducting qubits: exciton transport in photosynthetic complexes
Authors:
Sarah Mostame,
Patrick Rebentrost,
Alexander Eisfeld,
Andrew J. Kerman,
Dimitris I. Tsomokos,
Alán Aspuru-Guzik
Abstract:
Open quantum system approaches are widely used in the description of physical, chemical and biological systems. A famous example is electronic excitation transfer in the initial stage of photosynthesis, where harvested energy is transferred with remarkably high efficiency to a reaction center. This transport is affected by the motion of a structured vibrational environment, which makes simulations…
▽ More
Open quantum system approaches are widely used in the description of physical, chemical and biological systems. A famous example is electronic excitation transfer in the initial stage of photosynthesis, where harvested energy is transferred with remarkably high efficiency to a reaction center. This transport is affected by the motion of a structured vibrational environment, which makes simulations on a classical computer very demanding. Here we propose an analog quantum simulator of complex open system dynamics with a precisely engineered quantum environment. Our setup is based on superconducting circuits, a well established technology. As an example, we demonstrate that it is feasible to simulate exciton transport in the Fenna-Matthews-Olson photosynthetic complex. Our approach allows for a controllable single-molecule simulation and the investigation of energy transfer pathways as well as non-Markovian noise-correlation effects.
△ Less
Submitted 20 March, 2012; v1 submitted 8 June, 2011;
originally announced June 2011.
-
High-fidelity quantum operations on superconducting qubits in the presence of noise
Authors:
Andrew J. Kerman,
William D. Oliver
Abstract:
We present a scheme for implementing quantum operations with superconducting qubits. Our approach uses a "coupler" qubit to mediate a controllable, secular interaction between "data" qubits, pulse sequences which strongly mitigate the effects of 1/f flux noise, and a high-Q resonator-based local memory. We develop a Monte-Carlo simulation technique capable of describing arbitrary noise-induced d…
▽ More
We present a scheme for implementing quantum operations with superconducting qubits. Our approach uses a "coupler" qubit to mediate a controllable, secular interaction between "data" qubits, pulse sequences which strongly mitigate the effects of 1/f flux noise, and a high-Q resonator-based local memory. We develop a Monte-Carlo simulation technique capable of describing arbitrary noise-induced dephasing and decay, and demonstrate in this system a set of universal gate operations with O(10^-5) error probabilities in the presence of experimentally measured levels of 1/f noise. We then add relaxation and quantify the decay times required to maintain this error level.
△ Less
Submitted 19 March, 2008; v1 submitted 6 January, 2008;
originally announced January 2008.
