-
CMOS-fabricated ultraviolet light modulators using low-loss alumina piezo-optomechanical photonic circuits
Authors:
Zachary A. Castillo,
Roman Shugayev,
Daniel Dominguez,
Michael Gehl,
Nicholas Karl,
Andrew Leenheer,
Bethany Little,
Yuan-Yu Jau,
Matt Eichenfield
Abstract:
Ultra-violet (UV) and near-UV wavelengths are necessary for many important optical transitions for quantum technologies and various sensing mechanisms for biological and chemical detection. However, all well-known photonic platforms have excessively high losses in the UV, which has prevented photonic integrated circuits (PICs) being used to address these and other important application spaces. Pho…
▽ More
Ultra-violet (UV) and near-UV wavelengths are necessary for many important optical transitions for quantum technologies and various sensing mechanisms for biological and chemical detection. However, all well-known photonic platforms have excessively high losses in the UV, which has prevented photonic integrated circuits (PICs) being used to address these and other important application spaces. Photonic waveguides using low-loss alumina cores have emerged as a promising solution because of almunia's large optical bandgap and the high quality of films enabled by atomic layer deposition. However, to the best of our knowledge, active alumina PICs have only been realized using thermo-optic tuning, which precludes switching speeds shorter than one microsecond, high circuit densities, and cryogenically compatible operation. Here, we introduce a CMOS-fabricated, piezo-optomechanical PIC platform using alumina waveguides with low optical losses at UV wavelengths and aluminum nitride piezoelectric strain actuators, which solves the issues associated with thermal tuning. We demonstrate a high-performance, reconfigurable optical filter operating at wavelengths as low as 320 nm. The filter has a 6 nanosecond switching time, a loaded linewidth of 3.3 GHz, tuning rate of -120 MHz/V, and a hold power less than 20 nW.
△ Less
Submitted 21 May, 2025; v1 submitted 29 June, 2024;
originally announced July 2024.
-
A Sub-5mW Evanescent Field Atom Guide with Nanofibers towards Guided Atom Interferometry with Membrane Waveguides
Authors:
Adrian Orozco,
William Kindel,
Nicholas Karl,
Yuan-Yu Jau,
Michael Gehl,
Grant Biedermann,
Jongmin Lee
Abstract:
Great progress has been made in the field of quantum inertial sensors, from the laboratory to the real-world use, which will ultimately require sensor miniaturization and ruggedization for dynamic motion. However, lateral atomic movement with respect to the sensing axis limits inertial sensing, which inspires the atom guides to ensure transverse atomic confinement. Compared to a relatively large f…
▽ More
Great progress has been made in the field of quantum inertial sensors, from the laboratory to the real-world use, which will ultimately require sensor miniaturization and ruggedization for dynamic motion. However, lateral atomic movement with respect to the sensing axis limits inertial sensing, which inspires the atom guides to ensure transverse atomic confinement. Compared to a relatively large free-space optical mode, an evanescent field (EF) mode with an advantageously small mode area allows for stronger atom-light interactions and lower optical power requirements for the atom guides. We study EF atom guides in nanofibers and waveguides with traveling evanescent waves, rather than EF optical lattices with standing evanescent waves. Our preliminary demonstration of an EF atom guide takes place on a nanofiber using 685 nm and 937 nm lights, and we experimentally show that the atomic coherence of the EF atom guide (685/937 nm) is similar to the EF optical lattice. By replacing the 685 nm light with 793 nm light, we further demonstrate the sub-5mW EF atom guide (793/937 nm) on nanofibers and assess relative power reduction of 61$\%$ on nanofibers and 78$\%$ on membrane waveguides, compared to nanofibers (685/937 nm), for the same optical potential depth. Power reduction is beneficial for reducing total optical power requirements and improving heat dissipation in vacuum for atom guiding on chip-based membrane-photonic devices. To connect this work with EF-guided atom interferometry, we evaluate the viability and potential benefits of using the low-power light configuration on membrane waveguides, presenting fabricated linear and circular waveguides for future demonstrations. This is a promising step towards a chip-scale quantum inertial sensor array with reduced size, weight, and power.
△ Less
Submitted 12 November, 2023;
originally announced November 2023.
-
Multi-site Integrated Optical Addressing of Trapped Ions
Authors:
Joonhyuk Kwon,
William J. Setzer,
Michael Gehl,
Nicholas Karl,
Jay Van Der Wall,
Ryan Law,
Matthew G. Blain,
Daniel Stick,
Hayden J. McGuinness
Abstract:
One of the most effective ways to advance the performance of quantum computers and quantum sensors is to increase the number of qubits or quantum resources in the system. A major technical challenge that must be solved to realize this goal for trapped-ion systems is scaling the delivery of optical signals to many individual ions. In this paper we demonstrate an approach employing waveguides and mu…
▽ More
One of the most effective ways to advance the performance of quantum computers and quantum sensors is to increase the number of qubits or quantum resources in the system. A major technical challenge that must be solved to realize this goal for trapped-ion systems is scaling the delivery of optical signals to many individual ions. In this paper we demonstrate an approach employing waveguides and multi-mode interferometer splitters to optically address multiple $^{171}\textrm{Yb}^+$ ions in a surface trap by delivering all wavelengths required for full qubit control. Measurements of hyperfine spectra and Rabi flopping were performed on the E2 clock transition, using integrated waveguides for delivering the light needed for Doppler cooling, state preparation, coherent operations, and detection. We describe the use of splitters to address multiple ions using a single optical input per wavelength and use them to demonstrate simultaneous Rabi flopping on two different transitions occurring at distinct trap sites. This work represents an important step towards the realization of scalable integrated photonics for atomic clocks and trapped-ion quantum information systems.
△ Less
Submitted 28 March, 2024; v1 submitted 28 August, 2023;
originally announced August 2023.
-
Characterization of Suspended Membrane Waveguides towards a Photonic Atom Trap Integrated Platform
Authors:
Michael Gehl,
William Kindel,
Nicholas Karl,
Adrian Orozco,
Katherine Musick,
Douglas Trotter,
Christina Dallo,
Andrew Starbuck,
Andrew Leenheer,
Christopher DeRose,
Grant Biedermann,
Yuan-Yu Jau,
Jongmin Lee
Abstract:
We demonstrate an optical waveguide device, capable of supporting the high, in-vacuum, optical power necessary for trapping a single atom or a cold atom ensemble with evanescent fields. Our photonic integrated platforms, with suspended membrane waveguides, successfully manages optical powers of 6 mW (500 um span) to nearly 30 mW (125 um span) over an un-tethered waveguide span. This platform is co…
▽ More
We demonstrate an optical waveguide device, capable of supporting the high, in-vacuum, optical power necessary for trapping a single atom or a cold atom ensemble with evanescent fields. Our photonic integrated platforms, with suspended membrane waveguides, successfully manages optical powers of 6 mW (500 um span) to nearly 30 mW (125 um span) over an un-tethered waveguide span. This platform is compatible with laser cooling and magneto-optical traps (MOTs) in the vicinity of the suspended waveguide, called the membrane MOT and the needle MOT, a key ingredient for efficient trap loading. We evaluate two novel designs that explore critical thermal management features that enable this large power handling. This work represents a significant step toward an integrated platform for coupling neutral atom quantum systems to photonic and electronic integrated circuits on silicon.
△ Less
Submitted 18 March, 2021; v1 submitted 2 January, 2021;
originally announced January 2021.
-
Integrated optical addressing of a trapped ytterbium ion
Authors:
M. Ivory,
W. J. Setzer,
N. Karl,
H. McGuinness,
C. DeRose,
M. Blain,
D. Stick,
M. Gehl,
L. P. Parazzoli
Abstract:
We report on the characterization of heating rates and photo-induced electric charging on a microfabricated surface ion trap with integrated waveguides. Microfabricated surface ion traps have received considerable attention as a quantum information platform due to their scalability and manufacturability. Here we characterize the delivery of 435 nm light through waveguides and diffractive couplers…
▽ More
We report on the characterization of heating rates and photo-induced electric charging on a microfabricated surface ion trap with integrated waveguides. Microfabricated surface ion traps have received considerable attention as a quantum information platform due to their scalability and manufacturability. Here we characterize the delivery of 435 nm light through waveguides and diffractive couplers to a single ytterbium ion in a compact trap. We measure an axial heating rate at room temperature of $0.78\pm0.05$ q/ms and see no increase due to the presence of the waveguide. Furthermore, the electric field due to charging of the exposed dielectric outcoupler settles under normal operation after an initial shift. The frequency instability after settling is measured to be 0.9 kHz.
△ Less
Submitted 27 April, 2021; v1 submitted 24 November, 2020;
originally announced November 2020.
