-
Hardware-efficient quantum error correction via concatenated bosonic qubits
Authors:
Harald Putterman,
Kyungjoo Noh,
Connor T. Hann,
Gregory S. MacCabe,
Shahriar Aghaeimeibodi,
Rishi N. Patel,
Menyoung Lee,
William M. Jones,
Hesam Moradinejad,
Roberto Rodriguez,
Neha Mahuli,
Jefferson Rose,
John Clai Owens,
Harry Levine,
Emma Rosenfeld,
Philip Reinhold,
Lorenzo Moncelsi,
Joshua Ari Alcid,
Nasser Alidoust,
Patricio Arrangoiz-Arriola,
James Barnett,
Przemyslaw Bienias,
Hugh A. Carson,
Cliff Chen,
Li Chen
, et al. (96 additional authors not shown)
Abstract:
In order to solve problems of practical importance, quantum computers will likely need to incorporate quantum error correction, where a logical qubit is redundantly encoded in many noisy physical qubits. The large physical-qubit overhead typically associated with error correction motivates the search for more hardware-efficient approaches. Here, using a microfabricated superconducting quantum circ…
▽ More
In order to solve problems of practical importance, quantum computers will likely need to incorporate quantum error correction, where a logical qubit is redundantly encoded in many noisy physical qubits. The large physical-qubit overhead typically associated with error correction motivates the search for more hardware-efficient approaches. Here, using a microfabricated superconducting quantum circuit, we realize a logical qubit memory formed from the concatenation of encoded bosonic cat qubits with an outer repetition code of distance $d=5$. The bosonic cat qubits are passively protected against bit flips using a stabilizing circuit. Cat-qubit phase-flip errors are corrected by the repetition code which uses ancilla transmons for syndrome measurement. We realize a noise-biased CX gate which ensures bit-flip error suppression is maintained during error correction. We study the performance and scaling of the logical qubit memory, finding that the phase-flip correcting repetition code operates below threshold, with logical phase-flip error decreasing with code distance from $d=3$ to $d=5$. Concurrently, the logical bit-flip error is suppressed with increasing cat-qubit mean photon number. The minimum measured logical error per cycle is on average $1.75(2)\%$ for the distance-3 code sections, and $1.65(3)\%$ for the longer distance-5 code, demonstrating the effectiveness of bit-flip error suppression throughout the error correction cycle. These results, where the intrinsic error suppression of the bosonic encodings allows us to use a hardware-efficient outer error correcting code, indicate that concatenated bosonic codes are a compelling paradigm for reaching fault-tolerant quantum computation.
△ Less
Submitted 23 March, 2025; v1 submitted 19 September, 2024;
originally announced September 2024.
-
Demonstrating a long-coherence dual-rail erasure qubit using tunable transmons
Authors:
Harry Levine,
Arbel Haim,
Jimmy S. C. Hung,
Nasser Alidoust,
Mahmoud Kalaee,
Laura DeLorenzo,
E. Alex Wollack,
Patricio Arrangoiz-Arriola,
Amirhossein Khalajhedayati,
Rohan Sanil,
Hesam Moradinejad,
Yotam Vaknin,
Aleksander Kubica,
David Hover,
Shahriar Aghaeimeibodi,
Joshua Ari Alcid,
Christopher Baek,
James Barnett,
Kaustubh Bawdekar,
Przemyslaw Bienias,
Hugh Carson,
Cliff Chen,
Li Chen,
Harut Chinkezian,
Eric M. Chisholm
, et al. (88 additional authors not shown)
Abstract:
Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a "dual-rail qubit" consisting of a pair of…
▽ More
Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a "dual-rail qubit" consisting of a pair of resonantly coupled transmons can form a highly coherent erasure qubit, where transmon $T_1$ errors are converted into erasure errors and residual dephasing is strongly suppressed, leading to millisecond-scale coherence within the qubit subspace. We show that single-qubit gates are limited primarily by erasure errors, with erasure probability $p_\text{erasure} = 2.19(2)\times 10^{-3}$ per gate while the residual errors are $\sim 40$ times lower. We further demonstrate mid-circuit detection of erasure errors while introducing $< 0.1\%$ dephasing error per check. Finally, we show that the suppression of transmon noise allows this dual-rail qubit to preserve high coherence over a broad tunable operating range, offering an improved capacity to avoid frequency collisions. This work establishes transmon-based dual-rail qubits as an attractive building block for hardware-efficient quantum error correction.
△ Less
Submitted 20 March, 2024; v1 submitted 17 July, 2023;
originally announced July 2023.
-
Quantum transduction of optical photons from a superconducting qubit
Authors:
Mohammad Mirhosseini,
Alp Sipahigil,
Mahmoud Kalaee,
Oskar Painter
Abstract:
Bidirectional conversion of electrical and optical signals lies at the foundation of the global internet. Such converters are employed at repeater stations to extend the reach of long-haul fiber optic communication systems and within data centers to exchange high-speed optical signals between computers. Likewise, coherent microwave-to-optical conversion of single photons would enable the exchange…
▽ More
Bidirectional conversion of electrical and optical signals lies at the foundation of the global internet. Such converters are employed at repeater stations to extend the reach of long-haul fiber optic communication systems and within data centers to exchange high-speed optical signals between computers. Likewise, coherent microwave-to-optical conversion of single photons would enable the exchange of quantum states between remotely connected superconducting quantum processors, a promising quantum computing hardware platform. Despite the prospects of quantum networking, maintaining the fragile quantum state in such a conversion process with superconducting qubits has remained elusive. Here we demonstrate the conversion of a microwave-frequency excitation of a superconducting transmon qubit into an optical photon. We achieve this using an intermediary nanomechanical resonator which converts the electrical excitation of the qubit into a single phonon by means of a piezoelectric interaction, and subsequently converts the phonon to an optical photon via radiation pressure. We demonstrate optical photon generation from the qubit with a signal-to-noise greater than unity by recording quantum Rabi oscillations of the qubit through single-photon detection of the emitted light over an optical fiber. With proposed improvements in the device and external measurement set-up, such quantum transducers may lead to practical devices capable of realizing new hybrid quantum networks, and ultimately, distributed quantum computers.
△ Less
Submitted 9 April, 2020;
originally announced April 2020.
-
Efficient microwave frequency conversion mediated by the vibrational motion of a silicon nitride nanobeam oscillator
Authors:
J. M. Fink,
M. Kalaee,
R. Norte,
A. Pitanti,
O. Painter
Abstract:
Microelectromechanical systems and integrated photonics provide the basis for many reliable and compact circuit elements in modern communication systems. Electro-opto-mechanical devices are currently one of the leading approaches to realize ultra-sensitive, low-loss transducers for an emerging quantum information technology. Here we present an on-chip microwave frequency converter based on a plana…
▽ More
Microelectromechanical systems and integrated photonics provide the basis for many reliable and compact circuit elements in modern communication systems. Electro-opto-mechanical devices are currently one of the leading approaches to realize ultra-sensitive, low-loss transducers for an emerging quantum information technology. Here we present an on-chip microwave frequency converter based on a planar aluminum on silicon nitride platform that is compatible with slot-mode coupled photonic crystal cavities. We show efficient frequency conversion between two propagating microwave modes mediated by the radiation pressure interaction with a metalized dielectric nanobeam oscillator. We achieve bidirectional coherent conversion with a total device efficiency of up to ~ 60 %, a dynamic range of $2\times10^9$ photons/s and an instantaneous bandwidth of up to 1.7 kHz. A high fidelity quantum state transfer would be possible if the drive dependent output noise of currently $\sim14$ photons$\ \cdot\ $s$^{-1}\ \cdot\ $Hz$^{-1}$ is further reduced. Such a silicon nitride based transducer is in-situ reconfigurable and could be used for on-chip classical and quantum signal routing and filtering, both for microwave and hybrid microwave-optical applications.
△ Less
Submitted 27 November, 2019;
originally announced November 2019.
-
Quantum electromechanics of a hypersonic crystal
Authors:
Mahmoud Kalaee,
Mohammad Mirhosseini,
Paul B. Dieterle,
Matilda Peruzzo,
Johannes M. Fink,
Oskar Painter
Abstract:
Radiation pressure within engineered structures has recently been used to couple the motion of nanomechanical objects with high sensitivity to optical and microwave electromagnetic fields. Here, we demonstrate a form of electromechanical crystal for coupling microwave photons and hypersonic phonons by embedding the vacuum-gap capacitor of a superconducting resonator within a phononic crystal acous…
▽ More
Radiation pressure within engineered structures has recently been used to couple the motion of nanomechanical objects with high sensitivity to optical and microwave electromagnetic fields. Here, we demonstrate a form of electromechanical crystal for coupling microwave photons and hypersonic phonons by embedding the vacuum-gap capacitor of a superconducting resonator within a phononic crystal acoustic cavity. Utilizing a two-photon resonance condition for efficient microwave pumping and a phononic bandgap shield to eliminate acoustic radiation, we demonstrate large cooperative coupling ($C \approx 30$) between a pair of electrical resonances at $10$GHz and an acoustic resonance at $0.425$GHz. Electrical read-out of the phonon occupancy shows that the hypersonic acoustic mode has an intrinsic energy decay time of $2.3$ms and thermalizes close to its quantum ground-state of motion (occupancy $1.5$) at a fridge temperature of $10$mK. Such an electromechanical transducer is envisioned as part of a hybrid quantum circuit architecture, capable of interfacing to both superconducting qubits and optical photons.
△ Less
Submitted 30 August, 2018; v1 submitted 14 August, 2018;
originally announced August 2018.
-
Superconducting metamaterials for waveguide quantum electrodynamics
Authors:
Mohammad Mirhosseini,
Eunjong Kim,
Vinicius S. Ferreira,
Mahmoud Kalaee,
Alp Sipahigil,
Andrew J. Keller,
Oskar Painter
Abstract:
The embedding of tunable quantum emitters in a photonic bandgap structure enables the control of dissipative and dispersive interactions between emitters and their photonic bath. Operation in the transmission band, outside the gap, allows for studying waveguide quantum electrodynamics in the slow-light regime. Alternatively, tuning the emitter into the bandgap results in finite range emitter-emitt…
▽ More
The embedding of tunable quantum emitters in a photonic bandgap structure enables the control of dissipative and dispersive interactions between emitters and their photonic bath. Operation in the transmission band, outside the gap, allows for studying waveguide quantum electrodynamics in the slow-light regime. Alternatively, tuning the emitter into the bandgap results in finite range emitter-emitter interactions via bound photonic states. Here we couple a transmon qubit to a superconducting metamaterial with a deep sub-wavelength lattice constant ($λ/60$). The metamaterial is formed by periodically loading a transmission line with compact, low loss, low disorder lumped element microwave resonators. We probe the coherent and dissipative dynamics of the system by measuring the Lamb shift and the change in the lifetime of the transmon qubit. Tuning the qubit frequency in the vicinity of a band-edge with a group index of $n_g = 450$, we observe an anomalous Lamb shift of 10 MHz accompanied by a 24-fold enhancement in the qubit lifetime. In addition, we demonstrate selective enhancement and inhibition of spontaneous emission of different transmon transitions, which provide simultaneous access to long-lived metastable qubit states and states strongly coupled to propagating waveguide modes.
△ Less
Submitted 5 February, 2018;
originally announced February 2018.
-
Mechanical On-Chip Microwave Circulator
Authors:
S. Barzanjeh,
M. Wulf,
M. Peruzzo,
M. Kalaee,
P. B. Dieterle,
O. Painter,
J. M. Fink
Abstract:
Nonreciprocal circuit elements form an integral part of modern measurement and communication systems. Mathematically they require breaking of time-reversal symmetry, typically achieved using magnetic materials and more recently using the quantum Hall effect, parametric permittivity modulation or Josephson nonlinearities. Here, we demonstrate an on-chip magnetic-free circulator based on reservoir e…
▽ More
Nonreciprocal circuit elements form an integral part of modern measurement and communication systems. Mathematically they require breaking of time-reversal symmetry, typically achieved using magnetic materials and more recently using the quantum Hall effect, parametric permittivity modulation or Josephson nonlinearities. Here, we demonstrate an on-chip magnetic-free circulator based on reservoir engineered optomechanical interactions. Directional circulation is achieved with controlled phase-sensitive interference of six distinct electro-mechanical signal conversion paths. The presented circulator is compact, its silicon-on-insulator platform is compatible with both superconducting qubits and silicon photonics, and its noise performance is close to the quantum limit. With a high dynamic range, a tunable bandwidth of up to 30 MHz and an in-situ reconfigurability as beam splitter or wavelength converter, it could pave the way for superconducting qubit processors with integrated and multiplexed on-chip signal processing and readout.
△ Less
Submitted 6 June, 2017; v1 submitted 1 June, 2017;
originally announced June 2017.
-
Superconducting cavity-electromechanics on silicon-on-insulator
Authors:
Paul B. Dieterle,
Mahmoud Kalaee,
Johannes Fink,
Oskar Painter
Abstract:
Fabrication processes involving anhydrous hydrofluoric vapor etching are developed to create high-$Q$ aluminum superconducting microwave resonators on free-standing silicon membranes formed from a silicon-on-insulator wafer. Using this fabrication process, a high-impedance $8.9$GHz coil resonator is coupled capacitively with large participation ratio to a $9.7$MHz micromechanical resonator. Two-to…
▽ More
Fabrication processes involving anhydrous hydrofluoric vapor etching are developed to create high-$Q$ aluminum superconducting microwave resonators on free-standing silicon membranes formed from a silicon-on-insulator wafer. Using this fabrication process, a high-impedance $8.9$GHz coil resonator is coupled capacitively with large participation ratio to a $9.7$MHz micromechanical resonator. Two-tone microwave spectroscopy and radiation pressure back-action are used to characterize the coupled system in a dilution refrigerator down to temperatures of $T_f = 11$~mK, yielding a measured electromechanical vacuum coupling rate of $g_{0}/2π\approx 24.6$~Hz and a mechanical resonator $Q$-factor of $Q_{m}=1.7\times 10^7$. Microwave back-action cooling of the mechanical resonator is also studied, with a minimum phonon occupancy of $n_{m} \approx 16$ phonons being realized at an elevated fridge temperature of $T_f = 211$~mK.
△ Less
Submitted 15 January, 2016;
originally announced January 2016.
-
Quantum Electromechanics on Silicon Nitride Nanomembranes
Authors:
Johannes M. Fink,
Mahmoud Kalaee,
Alessandro Pitanti,
Richard Norte,
Lukas Heinzle,
Marcelo Davanco,
Kartik Srinivasan,
Oskar Painter
Abstract:
We present a platform based upon silicon nitride nanomembranes for integrating superconducting microwave circuits with planar acoustic and optical devices such as phononic and photonic crystals. Utilizing tensile stress and lithographic patterning of a silicon nitride nanomembrane we are able to reliably realize planar capacitors with vacuum gap sizes down to $s \approx 80$nm. In combination with…
▽ More
We present a platform based upon silicon nitride nanomembranes for integrating superconducting microwave circuits with planar acoustic and optical devices such as phononic and photonic crystals. Utilizing tensile stress and lithographic patterning of a silicon nitride nanomembrane we are able to reliably realize planar capacitors with vacuum gap sizes down to $s \approx 80$nm. In combination with spiral inductor coils of micron pitch, this yields microwave ($\approx 8$GHz) resonant circuits of high impedance ($Z_{0} \approx 3.4$k$Ω$) suitable for efficient electromechanical coupling to nanoscale acoustic structures. We measure an electromechanical vacuum coupling rate of $g_{0}/2π= 41.5$~Hz to the low frequency ($4.48$MHz) global beam motion of a patterned phononic crystal nanobeam, and through parametric microwave driving reach a backaction cooled mechanical mode occupancy as low as $n_{m} = 0.58$.
△ Less
Submitted 16 December, 2015; v1 submitted 15 December, 2015;
originally announced December 2015.
-
Position-squared coupling in a tunable photonic crystal optomechanical cavity
Authors:
Taofiq K. Paraiso,
Mahmoud Kalaee,
Leyun Zang,
Hannes Pfeifer,
Florian Marquardt,
Oskar Painter
Abstract:
We present the design, fabrication, and characterization of a planar silicon photonic crystal cavity in which large position-squared optomechanical coupling is realized. The device consists of a double-slotted photonic crystal structure in which motion of a central beam mode couples to two high-Q optical modes localized around each slot. Electrostatic tuning of the structure is used to controllabl…
▽ More
We present the design, fabrication, and characterization of a planar silicon photonic crystal cavity in which large position-squared optomechanical coupling is realized. The device consists of a double-slotted photonic crystal structure in which motion of a central beam mode couples to two high-Q optical modes localized around each slot. Electrostatic tuning of the structure is used to controllably hybridize the optical modes into supermodes which couple in a quadratic fashion to the motion of the beam. From independent measurements of the anti-crossing of the optical modes and of the optical spring effect, the position-squared vacuum coupling rate is measured to be as large as 245 Hz to the fundamental in-plane mechanical resonance of the structure at 8.7MHz, which in displacement units corresponds to a coupling coefficient of 1 THz/nm$^2$. This level of position-squared coupling is approximately five orders of magnitude larger than in conventional Fabry-Perot cavity systems.
△ Less
Submitted 27 May, 2015;
originally announced May 2015.
