-
Optomechanical Detection of Light with Orbital Angular Momentum
Authors:
Hamidreza Kaviani,
Roohollah Ghobadi,
Bishnupada Behera,
Marcelo Wu,
Aaron Hryciw,
Sonny Vo,
David Fattal,
Paul E. Barclay
Abstract:
We present an optomechanical device designed to allow optical transduction of orbital angular momentum of light. An optically induced twist imparted on the device by light is detected using an integrated cavity optomechanical system based on a nanobeam slot-mode photonic crystal cavity. This device could allow measurement of the orbital angular momentum of light when photons are absorbed by the me…
▽ More
We present an optomechanical device designed to allow optical transduction of orbital angular momentum of light. An optically induced twist imparted on the device by light is detected using an integrated cavity optomechanical system based on a nanobeam slot-mode photonic crystal cavity. This device could allow measurement of the orbital angular momentum of light when photons are absorbed by the mechanical element, or detection of the presence of photons when they are scattered into new orbital angular momentum states by a sub-wavelength grating patterned on the device. Such a system allows detection of a $l = 1$ orbital angular momentum field with an average power of $3.9\times10^3$ photons modulated at the mechanical resonance frequency of the device and can be extended to higher order orbital angular momentum states.
△ Less
Submitted 18 December, 2019;
originally announced December 2019.
-
Single crystal diamond nanobeam waveguide optomechanics
Authors:
Behzad Khanaliloo,
Harishankar Jayakumar,
Aaron C. Hryciw,
David P. Lake,
Hamidreza Kaviani,
Paul E. Barclay
Abstract:
Optomechanical devices sensitively transduce and actuate motion of nanomechanical structures using light. Single--crystal diamond promises to improve the performance of optomechanical devices, while also providing opportunities to interface nanomechanics with diamond color center spins and related quantum technologies. Here we demonstrate dissipative waveguide--optomechanical coupling exceeding 35…
▽ More
Optomechanical devices sensitively transduce and actuate motion of nanomechanical structures using light. Single--crystal diamond promises to improve the performance of optomechanical devices, while also providing opportunities to interface nanomechanics with diamond color center spins and related quantum technologies. Here we demonstrate dissipative waveguide--optomechanical coupling exceeding 35 GHz/nm to diamond nanobeams supporting both optical waveguide modes and mechanical resonances, and use this optomechanical coupling to measure nanobeam displacement with a sensitivity of $9.5$ fm/$\sqrt{\text{Hz}}$ and optical bandwidth $>150$nm. The nanobeams are fabricated from bulk optical grade single--crystal diamond using a scalable undercut etching process, and support mechanical resonances with quality factor $2.5 \times 10^5$ at room temperature, and $7.2 \times 10^5$ in cryogenic conditions (5K). Mechanical self--oscillations, resulting from interplay between photothermal and optomechanical effects, are observed with amplitude exceeding 200 nm for sub-$μ$W absorbed optical power, demonstrating the potential for optomechanical excitation and manipulation of diamond nanomechanical structures.
△ Less
Submitted 28 April, 2015; v1 submitted 5 February, 2015;
originally announced February 2015.
-
Nonlinear optomechanical paddle nanocavities
Authors:
Hamidreza Kaviani,
Chris Healey,
Marcelo Wu,
Roohollah Ghobadi,
Aaron Hryciw,
Paul E. Barclay
Abstract:
Nonlinear optomechanical coupling is the basis for many potential future experiments in quantum optomechanics (e.g., quantum non-demolition measurements, preparation of non-classical states), which to date have been difficult to realize due to small non-linearity in typical optomechanical devices. Here we introduce an optomechanical system combining strong nonlinear optomechanical coupling, low ma…
▽ More
Nonlinear optomechanical coupling is the basis for many potential future experiments in quantum optomechanics (e.g., quantum non-demolition measurements, preparation of non-classical states), which to date have been difficult to realize due to small non-linearity in typical optomechanical devices. Here we introduce an optomechanical system combining strong nonlinear optomechanical coupling, low mass and large optical mode spacing. This nanoscale "paddle nanocavity" supports mechanical resonances with hundreds of fg mass which couple nonlinearly to optical modes with a quadratic optomechanical coupling coefficient $g^{(2)} > 2π\times400$ MHz/nm$^2$, and a two phonon to single photon optomechanical coupling rate $Δω_0 > 2π\times 16$ Hz. This coupling relies on strong phonon-photon interactions in a structure whose optical mode spectrum is highly non--degenerate. Nonlinear optomechanical readout of thermally driven motion in these devices should be observable for T $> 50 $ mK, and measurement of phonon shot noise is achievable. This shows that strong nonlinear effects can be realized without relying on coupling between nearly degenerate optical modes, thus avoiding parasitic linear coupling present in two mode systems.
△ Less
Submitted 24 February, 2015; v1 submitted 14 December, 2014;
originally announced December 2014.
-
Dissipative and Dispersive Optomechanics in a Nanocavity Torque Sensor
Authors:
Marcelo Wu,
Aaron C. Hryciw,
Chris Healey,
David P. Lake,
Harishankar Jayakumar,
Mark R. Freeman,
John P. Davis,
Paul E. Barclay
Abstract:
Dissipative and dispersive optomechanical couplings are experimentally observed in a photonic crystal split-beam nanocavity optimized for detecting nanoscale sources of torque. Dissipative coupling of up to approximately $500$ MHz/nm and dispersive coupling of $2$ GHz/nm enable measurements of sub-pg torsional and cantilever-like mechanical resonances with a thermally-limited torque detection sens…
▽ More
Dissipative and dispersive optomechanical couplings are experimentally observed in a photonic crystal split-beam nanocavity optimized for detecting nanoscale sources of torque. Dissipative coupling of up to approximately $500$ MHz/nm and dispersive coupling of $2$ GHz/nm enable measurements of sub-pg torsional and cantilever-like mechanical resonances with a thermally-limited torque detection sensitivity of 1.2$\times 10^{-20} \text{N} \, \text{m}/\sqrt{\text{Hz}}$ in ambient conditions and 1.3$\times 10^{-21} \text{N} \, \text{m}/\sqrt{\text{Hz}}$ in low vacuum. Interference between optomechanical coupling mechanisms is observed to enhance detection sensitivity and generate a mechanical-mode-dependent optomechanical wavelength response.
△ Less
Submitted 5 September, 2014; v1 submitted 25 March, 2014;
originally announced March 2014.
-
Cavity optomechanics in gallium phosphide microdisks
Authors:
Matthew Mitchell,
Aaron C. Hryciw,
Paul E. Barclay
Abstract:
We demonstrate gallium phosphide (GaP) microdisk optical cavities with intrinsic quality factors $ > 2.8\times10^{5}$ and mode volumes $< 10 (λ/n)^3$, and study their nonlinear and optomechanical properties. For optical intensities up to $8.0\times10^4$ intracavity photons, we observe optical loss in the microcavity to decrease with increasing intensity, indicating that saturable absorption sites…
▽ More
We demonstrate gallium phosphide (GaP) microdisk optical cavities with intrinsic quality factors $ > 2.8\times10^{5}$ and mode volumes $< 10 (λ/n)^3$, and study their nonlinear and optomechanical properties. For optical intensities up to $8.0\times10^4$ intracavity photons, we observe optical loss in the microcavity to decrease with increasing intensity, indicating that saturable absorption sites are present in the GaP material, and that two-photon absorption is not significant. We observe optomechanical coupling between optical modes of the microdisk around 1.5 $μ$m and several mechanical resonances, and measure an optical spring effect consistent with a theoretically predicted optomechanical coupling rate $g_0/2π\sim 30$ kHz for the fundamental mechanical radial breathing mode at 488 MHz.
△ Less
Submitted 29 May, 2014; v1 submitted 24 September, 2013;
originally announced September 2013.
