Showing 1–19 of 19 results for author: Grönberg, L

Quantum SWAP gate realized with CZ and iSWAP gates in a superconducting architecture

Authors: Christian Križan, Janka Biznárová, Liangyu Chen, Emil Hogedal, Amr Osman, Christopher W. Warren, Sandoko Kosen, Hang-Xi Li, Tahereh Abad, Anuj Aggarwal, Marco Caputo, Jorge Fernández-Pendás, Akshay Gaikwad, Leif Grönberg, Andreas Nylander, Robert Rehammar, Marcus Rommel, Olga I. Yuzephovich, Anton Frisk Kockum, Joonas Govenius, Giovanna Tancredi, Jonas Bylander

Abstract: It is advantageous for any quantum processor to support different classes of two-qubit quantum logic gates when compiling quantum circuits, a property that is typically not seen with existing platforms. In particular, access to a gate set that includes support for the CZ-type, the iSWAP-type, and the SWAP-type families of gates, renders conversions between these gate families unnecessary during co… ▽ More It is advantageous for any quantum processor to support different classes of two-qubit quantum logic gates when compiling quantum circuits, a property that is typically not seen with existing platforms. In particular, access to a gate set that includes support for the CZ-type, the iSWAP-type, and the SWAP-type families of gates, renders conversions between these gate families unnecessary during compilation as any two-qubit Clifford gate can be executed using at most one two-qubit gate from this set, plus additional single-qubit gates. We experimentally demonstrate that a SWAP gate can be decomposed into one iSWAP gate followed by one CZ gate, affirming a more efficient compilation strategy over the conventional approach that relies on three iSWAP or three CZ gates to replace a SWAP gate. Our implementation makes use of a superconducting quantum processor design based on fixed-frequency transmon qubits coupled together by a parametrically modulated tunable transmon coupler, extending this platform's native gate set so that any two-qubit Clifford unitary matrix can be realized using no more than two two-qubit gates and single-qubit gates. △ Less

Submitted 19 December, 2024; originally announced December 2024.

Comments: 29 pages, 13 figures

Methods to achieve near-millisecond energy relaxation and dephasing times for a superconducting transmon qubit

Authors: Mikko Tuokkola, Yoshiki Sunada, Heidi Kivijärvi, Jonatan Albanese, Leif Grönberg, Jukka-Pekka Kaikkonen, Visa Vesterinen, Joonas Govenius, Mikko Möttönen

Abstract: Superconducting qubits are one of the most promising physical systems for implementing quantum computers. However, executing quantum algorithms of practical computational advantage requires further improvements in the fidelities of qubit operations, which are currently limited by the energy relaxation and dephasing times of the qubits. Here, we report our measurement results of a high-coherence tr… ▽ More Superconducting qubits are one of the most promising physical systems for implementing quantum computers. However, executing quantum algorithms of practical computational advantage requires further improvements in the fidelities of qubit operations, which are currently limited by the energy relaxation and dephasing times of the qubits. Here, we report our measurement results of a high-coherence transmon qubit with energy relaxation and echo dephasing times surpassing those in the existing literature. We measure a qubit frequency of 2.9 GHz, an energy relaxation time with a median of 425 us and a maximum of (666 +/- 33) us, and an echo dephasing time with a median of 541 us and a maximum of (1057 +/- 138) us. We report in detail our design, fabrication process, and measurement setup to facilitate the reproduction and wide adoption of high-coherence transmon qubits in the academia and industry. △ Less

Submitted 3 February, 2025; v1 submitted 26 July, 2024; originally announced July 2024.

Comments: 16 pages, 12 figures

Signal crosstalk in a flip-chip quantum processor

Authors: Sandoko Kosen, Hang-Xi Li, Marcus Rommel, Robert Rehammar, Marco Caputo, Leif Grönberg, Jorge Fernández-Pendás, Anton Frisk Kockum, Janka Biznárová, Liangyu Chen, Christian Križan, Andreas Nylander, Amr Osman, Anita Fadavi Roudsari, Daryoush Shiri, Giovanna Tancredi, Joonas Govenius, Jonas Bylander

Abstract: Quantum processors require a signal-delivery architecture with high addressability (low crosstalk) to ensure high performance already at the scale of dozens of qubits. Signal crosstalk causes inadvertent driving of quantum gates, which will adversely affect quantum-gate fidelities in scaled-up devices. Here, we demonstrate packaged flip-chip superconducting quantum processors with signal-crosstalk… ▽ More Quantum processors require a signal-delivery architecture with high addressability (low crosstalk) to ensure high performance already at the scale of dozens of qubits. Signal crosstalk causes inadvertent driving of quantum gates, which will adversely affect quantum-gate fidelities in scaled-up devices. Here, we demonstrate packaged flip-chip superconducting quantum processors with signal-crosstalk performance competitive with those reported in other platforms. For capacitively coupled qubit-drive lines, we find on-resonant crosstalk better than -27 dB (average -37 dB). For inductively coupled magnetic-flux-drive lines, we find less than 0.13 % direct-current flux crosstalk (average 0.05 %). These observed crosstalk levels are adequately small and indicate a decreasing trend with increasing distance, which is promising for further scaling up to larger numbers of qubits. We discuss the implication of our results for the design of a low-crosstalk, on-chip signal delivery architecture, including the influence of a shielding tunnel structure, potential sources of crosstalk, and estimation of crosstalk-induced qubit-gate error in scaled-up quantum processors. △ Less

Submitted 12 September, 2024; v1 submitted 1 March, 2024; originally announced March 2024.

Comments: 21 pages, 16 figures, includes appendices, updated discussion on source of xy crosstalk, flux stability, etc

Journal ref: PRX Quantum 5, 030350 (2024)

Experimentally verified, fast analytic and numerical design of superconducting resonators in flip-chip architectures

Authors: Hang-Xi Li, Daryoush Shiri, Sandoko Kosen, Marcus Rommel, Lert Chayanun, Andreas Nylander, Robert Rehammar, Giovanna Tancredi, Marco Caputo, Kestutis Grigoras, Leif Grönberg, Joonas Govenius, Jonas Bylander

Abstract: In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal mapping techniques, to p… ▽ More In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal mapping techniques, to predict a resonator's parameters directly from its 2D cross-section, without computationally heavy and time-consuming 3D simulation. We demonstrate the method's validity by comparing the calculated resonator frequency and coupling quality factor with those obtained through 3D finite-element-method simulation and by measurement of 15 resonators in a flip-chip-integrated architecture. We achieve a discrepancy of less than 2% between designed and measured frequencies, for 6-GHz resonators. We also propose a design method that reduces the sensitivity of the resonant frequency to variations in the inter-chip spacing. △ Less

Submitted 30 August, 2023; v1 submitted 9 May, 2023; originally announced May 2023.

Comments: Accepted version. 13 pages, 12 figures

Journal ref: IEEE Transactions on Quantum Engineering, vol. 4, pp. 1-12, 2023, Art no. 3101312

Initial experimental results on a superconducting-qubit reset based on photon-assisted quasiparticle tunneling

Authors: V. A. Sevriuk, W. Liu, J. Rönkkö, H. Hsu, F. Marxer, T. F. Mörstedt, M. Partanen, J. Räbinä, M. Venkatesh, J. Hotari, L. Grönberg, J. Heinsoo, T. Li, J. Tuorila, K. W. Chan, J. Hassel, K. Y. Tan, M. Möttönen

Abstract: We present here our recent results on qubit reset scheme based on a quantum-circuit refrigerator (QCR). In particular, we use the photon-assisted quasiparticle tunneling through a superconductor--insulator--normal-metal--insulator--superconductor junction to controllably decrease the energy relaxation time of the qubit during the QCR operation. In our experiment, we use a transmon qubit with dispe… ▽ More We present here our recent results on qubit reset scheme based on a quantum-circuit refrigerator (QCR). In particular, we use the photon-assisted quasiparticle tunneling through a superconductor--insulator--normal-metal--insulator--superconductor junction to controllably decrease the energy relaxation time of the qubit during the QCR operation. In our experiment, we use a transmon qubit with dispersive readout. The QCR is capacitively coupled to the qubit through its normal-metal island. We employ rapid, square-shaped QCR control voltage pulses with durations in the range of 2--350 ns and a variety of amplitudes to optimize the reset time and fidelity. Consequently, we reach a qubit ground-state probability of roughly 97% with 80-ns pulses starting from the first excited state. The qubit state probability is extracted from averaged readout signal, where the calibration is based of the Rabi oscillations, thus not distinguishing the residual thermal population of the qubit. △ Less

Submitted 2 December, 2022; originally announced December 2022.

Journal ref: Appl. Phys. Lett. 121, 234002 (2022)

Transmon qubit readout fidelity at the threshold for quantum error correction without a quantum-limited amplifier

Authors: Liangyu Chen, Hang-Xi Li, Yong Lu, Christopher W. Warren, Christian J. Križan, Sandoko Kosen, Marcus Rommel, Shahnawaz Ahmed, Amr Osman, Janka Biznárová, Anita Fadavi Roudsari, Benjamin Lienhard, Marco Caputo, Kestutis Grigoras, Leif Grönberg, Joonas Govenius, Anton Frisk Kockum, Per Delsing, Jonas Bylander, Giovanna Tancredi

Abstract: High-fidelity and rapid readout of a qubit state is key to quantum computing and communication, and it is a prerequisite for quantum error correction. We present a readout scheme for superconducting qubits that combines two microwave techniques: applying a shelving technique to the qubit that effectively increases the energy-relaxation time, and a two-tone excitation of the readout resonator to di… ▽ More High-fidelity and rapid readout of a qubit state is key to quantum computing and communication, and it is a prerequisite for quantum error correction. We present a readout scheme for superconducting qubits that combines two microwave techniques: applying a shelving technique to the qubit that effectively increases the energy-relaxation time, and a two-tone excitation of the readout resonator to distinguish among qubit populations in higher energy levels. Using a machine-learning algorithm to post-process the two-tone measurement results further improves the qubit-state assignment fidelity. We perform single-shot frequency-multiplexed qubit readout, with a 140ns readout time, and demonstrate 99.5% assignment fidelity for two-state readout and 96.9% for three-state readout - without using a quantum-limited amplifier. △ Less

Submitted 11 August, 2022; originally announced August 2022.

Qubit-compatible substrates with superconducting through-silicon vias

Authors: K. Grigoras, N. Yurttagül, J. -P. Kaikkonen, E. T. Mannila, P. Eskelinen, D. P. Lozano, H. -X. Li, M. Rommel, D. Shiri, N. Tiencken, S. Simbierowicz, A. Ronzani, J. Hätinen, D. Datta, V. Vesterinen, L. Grönberg, J. Biznárová, A. Fadavi Roudsari, S. Kosen, A. Osman, M. Prunnila, J. Hassel, J. Bylander, J. Govenius

Abstract: We fabricate and characterize superconducting through-silicon vias and electrodes suitable for superconducting quantum processors. We measure internal quality factors of a million for test resonators excited at single-photon levels, on chips with superconducting vias used to stitch ground planes on the front and back sides of the chips. This resonator performance is on par with the state of the ar… ▽ More We fabricate and characterize superconducting through-silicon vias and electrodes suitable for superconducting quantum processors. We measure internal quality factors of a million for test resonators excited at single-photon levels, on chips with superconducting vias used to stitch ground planes on the front and back sides of the chips. This resonator performance is on par with the state of the art for silicon-based planar solutions, despite the presence of vias. Via stitching of ground planes is an important enabling technology for increasing the physical size of quantum processor chips, and is a first step toward more complex quantum devices with three-dimensional integration. △ Less

Submitted 8 November, 2022; v1 submitted 25 January, 2022; originally announced January 2022.

Comments: Accepted version. 11 pages, 7 figures, 2 tables with appendices included

Journal ref: IEEE Transactions on Quantum Engineering, vol. 3, pp. 1-10, 2022, Art no. 5100310

Building Blocks of a Flip-Chip Integrated Superconducting Quantum Processor

Authors: Sandoko Kosen, Hang-Xi Li, Marcus Rommel, Daryoush Shiri, Christopher Warren, Leif Grönberg, Jaakko Salonen, Tahereh Abad, Janka Biznárová, Marco Caputo, Liangyu Chen, Kestutis Grigoras, Göran Johansson, Anton Frisk Kockum, Christian Križan, Daniel Pérez Lozano, Graham Norris, Amr Osman, Jorge Fernández-Pendás, Alberto Ronzani, Anita Fadavi Roudsari, Slawomir Simbierowicz, Giovanna Tancredi, Andreas Wallraff, Christopher Eichler , et al. (2 additional authors not shown)

Abstract: We have integrated single and coupled superconducting transmon qubits into flip-chip modules. Each module consists of two chips -- one quantum chip and one control chip -- that are bump-bonded together. We demonstrate time-averaged coherence times exceeding $90\,μs$, single-qubit gate fidelities exceeding $99.9\%$, and two-qubit gate fidelities above $98.6\%$. We also present device design methods… ▽ More We have integrated single and coupled superconducting transmon qubits into flip-chip modules. Each module consists of two chips -- one quantum chip and one control chip -- that are bump-bonded together. We demonstrate time-averaged coherence times exceeding $90\,μs$, single-qubit gate fidelities exceeding $99.9\%$, and two-qubit gate fidelities above $98.6\%$. We also present device design methods and discuss the sensitivity of device parameters to variation in interchip spacing. Notably, the additional flip-chip fabrication steps do not degrade the qubit performance compared to our baseline state-of-the-art in single-chip, planar circuits. This integration technique can be extended to the realisation of quantum processors accommodating hundreds of qubits in one module as it offers adequate input/output wiring access to all qubits and couplers. △ Less

Submitted 14 June, 2022; v1 submitted 5 December, 2021; originally announced December 2021.

Comments: 33 pages, 12 figures, includes supplementary materials, updated with further calculations on participation ratio and Purcell limit

Journal ref: Quantum Science and Technology, 7(3), 035018 (2022)

Broadband continuous variable entanglement generation using Kerr-free Josephson metamaterial

Authors: Michael Perelshtein, Kirill Petrovnin, Visa Vesterinen, Sina Hamedani Raja, Ilari Lilja, Marco Will, Alexander Savin, Slawomir Simbierowicz, Robab Jabdaraghi, Janne Lehtinen, Leif Grönberg, Juha Hassel, Mika Prunnila, Joonas Govenius, Sorin Paraoanu, Pertti Hakonen

Abstract: Entangled microwave photons form a fundamental resource for quantum information processing and sensing with continuous variables. We use a low-loss Josephson metamaterial comprising superconducting, non-linear, asymmetric inductive elements to generate frequency-entangled photons from vacuum fluctuations at a rate of 2 giga entangled bits per second spanning over 4 GHz bandwidth. The device is ope… ▽ More Entangled microwave photons form a fundamental resource for quantum information processing and sensing with continuous variables. We use a low-loss Josephson metamaterial comprising superconducting, non-linear, asymmetric inductive elements to generate frequency-entangled photons from vacuum fluctuations at a rate of 2 giga entangled bits per second spanning over 4 GHz bandwidth. The device is operated as a traveling wave parametric amplifier under Kerr-relieving biasing conditions. Furthermore, we realize the first successfully demonstration of single-mode squeezing in such devices -- $3.1\pm0.7$\,dB below the zero-point level at half of modulation frequency. △ Less

Submitted 19 March, 2022; v1 submitted 11 November, 2021; originally announced November 2021.

Comments: 15 pages, 9 figures including supplement

A low-noise on-chip coherent microwave source

Authors: Chengyu Yan, Juha Hassel, Visa Vesterinen, Jinli Zhang, Joni Ikonen, Leif Grönberg, Jan Goetz, Mikko Möttönen

Abstract: The scaleup of quantum computers operating in the microwave domain requires advanced control electronics, and the use of integrated components that operate at the temperature of the quantum devices is potentially beneficial. However, such an approach requires ultra-low power dissipation and high signal quality in order to ensure quantum-coherent operations. Here, we report an on-chip device that i… ▽ More The scaleup of quantum computers operating in the microwave domain requires advanced control electronics, and the use of integrated components that operate at the temperature of the quantum devices is potentially beneficial. However, such an approach requires ultra-low power dissipation and high signal quality in order to ensure quantum-coherent operations. Here, we report an on-chip device that is based on a Josephson junction coupled to a spiral resonator and is capable of coherent continuous-wave microwave emission. We show that characteristics of the device accurately follow a theory based on a perturbative treatment of the capacitively shunted Josephson junction as a gain element. The infidelity of typical quantum gate operations due to the phase noise of this cryogenic 25-pW microwave source is less than 0.1% up to 10-ms evolution times, which is below the infidelity caused by dephasing in state-of-the-art superconducting qubits. Together with future cryogenic amplitude and phase modulation techniques, our approach may lead to scalable cryogenic control systems for quantum processors. △ Less

Submitted 23 November, 2021; v1 submitted 12 March, 2021; originally announced March 2021.

Journal ref: Nature Electronics (2021)

A superconductor free of quasiparticles for seconds

Authors: E. T. Mannila, P. Samuelsson, S. Simbierowicz, J. T. Peltonen, V. Vesterinen, L. Grönberg, J. Hassel, V. F. Maisi, J. P. Pekola

Abstract: Superconducting devices, based on the Cooper pairing of electrons, play an important role in existing and emergent technologies, ranging from radiation detectors to quantum computers. Their performance is limited by spurious quasiparticle excitations formed from broken Cooper pairs. Efforts to achieve ultra-low quasiparticle densities have reached time-averaged numbers of excitations on the order… ▽ More Superconducting devices, based on the Cooper pairing of electrons, play an important role in existing and emergent technologies, ranging from radiation detectors to quantum computers. Their performance is limited by spurious quasiparticle excitations formed from broken Cooper pairs. Efforts to achieve ultra-low quasiparticle densities have reached time-averaged numbers of excitations on the order of one in state-of-the-art devices. However, the dynamics of the quasiparticle population as well as the time scales for adding and removing individual excitations remain largely unexplored. Here, we experimentally demonstrate a superconductor completely free of quasiparticles for periods lasting up to seconds. We monitor the quasiparticle number on a mesoscopic superconductor in real time by measuring the charge tunneling to a normal metal contact. Quiet, excitation-free periods are interrupted by random-in-time Cooper pair breaking events, followed by a burst of charge tunneling within a millisecond. Our results demonstrate the possibility of operating devices without quasiparticles with potentially improved performance. In addition, our experiment probes the origins of nonequilibrium quasiparticles in our device; the decay of the Cooper pair breaking rate over several weeks following the initial cooldown rules out processes arising from cosmic or long-lived radioactive sources. △ Less

Submitted 5 July, 2022; v1 submitted 31 January, 2021; originally announced February 2021.

Comments: 8 pages, 4 figures + supplementary information

Journal ref: Nature Physics 18, 145-148 (2022)

Characterizing cryogenic amplifiers with a matched temperature-variable noise source

Authors: Slawomir Simbierowicz, Visa Vesterinen, Joshua Milem, Aleksi Lintunen, Mika Oksanen, Leif Roschier, Leif Grönberg, Juha Hassel, David Gunnarsson, Russell E. Lake

Abstract: We present a cryogenic microwave noise source with a characteristic impedance of 50 $Ω$, which can be installed in a coaxial line of a cryostat. The bath temperature of the noise source is continuously variable between 0.1 K and 5 K without causing significant back-action heating on the sample space. As a proof-of-concept experiment, we perform Y-factor measurements of an amplifier cascade that in… ▽ More We present a cryogenic microwave noise source with a characteristic impedance of 50 $Ω$, which can be installed in a coaxial line of a cryostat. The bath temperature of the noise source is continuously variable between 0.1 K and 5 K without causing significant back-action heating on the sample space. As a proof-of-concept experiment, we perform Y-factor measurements of an amplifier cascade that includes a traveling wave parametric amplifier and a commercial high electron mobility transistor amplifier. We observe system noise temperatures as low as $680^{+20}_{-200}$ mK at 5.7 GHz corresponding to $1.5^{+0.1}_{-0.7}$ excess photons. The system we present has immediate applications in the validation of solid-state qubit readout lines. △ Less

Submitted 25 February, 2021; v1 submitted 7 September, 2020; originally announced September 2020.

Comments: The following article has been accepted by Review of Scientific Instruments. After it is published, it will be found at https://doi.org/10.1063/5.0028951

Photon-number-dependent effective Lamb shift

Authors: Arto Viitanen, Matti Silveri, Máté Jenei, Vasilii Sevriuk, Kuan Yen Tan, Matti Partanen, Jan Goetz, Leif Grönberg, Vasilii Vadimov, Valtteri Lahtinen, Mikko Möttönen

Abstract: The Lamb shift, an energy shift arising from the presence of the electromagnetic vacuum, has been observed in various quantum systems and established as the part of the energy shift independent of the environmental photon number. However, typical studies are based on simplistic bosonic models which may be challenged in practical quantum devices. We demonstrate a hybrid bosonic-fermionic environmen… ▽ More The Lamb shift, an energy shift arising from the presence of the electromagnetic vacuum, has been observed in various quantum systems and established as the part of the energy shift independent of the environmental photon number. However, typical studies are based on simplistic bosonic models which may be challenged in practical quantum devices. We demonstrate a hybrid bosonic-fermionic environment for a linear resonator mode and observe that the photon number in the environment can dramatically increase both the dissipation and the effective Lamb shift of the mode. Our observations are quantitatively described by a first-principles model which we develop here also to guide device design for future quantum-technological applications. The device demonstrated here can be utilized as a fully rf-operated quantum-circuit refrigerator to quickly reset superconducting qubits. △ Less

Submitted 4 August, 2021; v1 submitted 19 August, 2020; originally announced August 2020.

Comments: 15 pages, 10 figures

Journal ref: Phys. Rev. Research 3, 033126 (2021)

Broadband Tunable Phase Shifter For Microwaves

Authors: Jinli Zhang, Tianyi Li, Roope Kokkoniemi, Chengyu Yan, Wei Liu, Matti Partanen, Kuan Yen Tan, Ming He, Lu Ji, Leif Grönberg, Mikko Möttönen

Abstract: We implement a broadly tunable phase shifter for microwaves based on superconducting quantum interference devices (SQUIDs) and study it both experimentally and theoretically. At different frequencies, a unit transmission coefficient, $|S_{21}|=1$, can be theoretically achieved along a curve where the phase shift is controllable by magnetic flux. The fabricated device consists of three equidistant… ▽ More We implement a broadly tunable phase shifter for microwaves based on superconducting quantum interference devices (SQUIDs) and study it both experimentally and theoretically. At different frequencies, a unit transmission coefficient, $|S_{21}|=1$, can be theoretically achieved along a curve where the phase shift is controllable by magnetic flux. The fabricated device consists of three equidistant SQUIDs interrupting a transmission line. We model each SQUID embedded at different positions along the transmission line with two parameters, capacitance and inductance, the values of which we extract from the experiments. In our experiments, the tunability of the phase shift varies from from $0.07\timesπ$ to $0.14\timesπ$ radians along the full-transmission curve with the input frequency ranging from 6.00 to 6.28~GHz. The reported measurements are in good agreement with simulations, which is promising for future design work of phase shifters for different applications. △ Less

Submitted 3 March, 2020; originally announced March 2020.

Fast control of dissipation in a superconducting resonator

Authors: Vasilii Sevriuk, Kuan Yen Tan, Eric Hyyppä, Matti Silveri, Matti Partanen, Máté Jenei, Shumpei Masuda, Jan Goetz, Visa Vesterinen, Leif Grönberg, Mikko Möttönen

Abstract: We report on fast tunability of an electromagnetic environment coupled to a superconducting coplanar waveguide resonator. Namely, we utilize a recently-developed quantum-circuit refrigerator (QCR) to experimentally demonstrate a dynamic tunability in the total damping rate of the resonator up to almost two orders of magnitude. Based on the theory it corresponds to a change in the internal damping… ▽ More We report on fast tunability of an electromagnetic environment coupled to a superconducting coplanar waveguide resonator. Namely, we utilize a recently-developed quantum-circuit refrigerator (QCR) to experimentally demonstrate a dynamic tunability in the total damping rate of the resonator up to almost two orders of magnitude. Based on the theory it corresponds to a change in the internal damping rate by nearly four orders of magnitude. The control of the QCR is fully electrical, with the shortest implemented operation times in the range of 10 ns. This experiment constitutes a fast active reset of a superconducting quantum circuit. In the future, a similar scheme can potentially be used to initialize superconducting quantum bits. △ Less

Submitted 27 June, 2019; originally announced June 2019.

Comments: 4 pages, 2 figures

Calibration of cryogenic amplification chains using normal-metal--insulator--superconductor junctions

Authors: Eric Hyyppä, Máté Jenei, Shumpei Masuda, Kuan Yen Tan, Matti Silveri, Jan Goetz, Matti Partanen, Russel E. Lake, Leif Grönberg, Mikko Möttönen

Abstract: Various applications of quantum devices call for an accurate calibration of cryogenic amplification chains. To this end, we present a convenient calibration scheme and use it to accurately measure the total gain and noise temperature of an amplification chain by employing normal-metal--insulator--superconductor (NIS) junctions. Our method is based on the radiation emitted by inelastic electron tun… ▽ More Various applications of quantum devices call for an accurate calibration of cryogenic amplification chains. To this end, we present a convenient calibration scheme and use it to accurately measure the total gain and noise temperature of an amplification chain by employing normal-metal--insulator--superconductor (NIS) junctions. Our method is based on the radiation emitted by inelastic electron tunneling across voltage-biased NIS junctions. We derive an analytical equation that relates the generated power to the applied bias voltage which is the only control parameter of the device. After the setup has been characterized using a standard voltage reflection measurement, the total gain and the noise temperature are extracted by fitting the analytical equation to the microwave power measured at the output of the amplification chain. The 1$σ$ uncertainty of the total gain of 51.84 dB appears to be of the order of 0.1 dB. △ Less

Submitted 1 April, 2019; originally announced April 2019.

Comments: 5 pages, 3 figures

Optimized heat transfer at exceptional points in quantum circuits

Authors: Matti Partanen, Jan Goetz, Kuan Yen Tan, Kassius Kohvakka, Vasilii Sevriuk, Russell E. Lake, Roope Kokkoniemi, Joni Ikonen, Dibyendu Hazra, Akseli Mäkinen, Eric Hyyppä, Leif Grönberg, Visa Vesterinen, Matti Silveri, Mikko Möttönen

Abstract: Superconducting quantum circuits are potential candidates to realize a large-scale quantum computer. The envisioned large density of integrated components, however, requires a proper thermal management and control of dissipation. To this end, it is advantageous to utilize tunable dissipation channels and to exploit the optimized heat flow at exceptional points (EPs). Here, we experimentally realiz… ▽ More Superconducting quantum circuits are potential candidates to realize a large-scale quantum computer. The envisioned large density of integrated components, however, requires a proper thermal management and control of dissipation. To this end, it is advantageous to utilize tunable dissipation channels and to exploit the optimized heat flow at exceptional points (EPs). Here, we experimentally realize an EP in a superconducting microwave circuit consisting of two resonators. The EP is a singularity point of the Hamiltonian, and corresponds to the most efficient heat transfer between the resonators without oscillation of energy. We observe a crossover from underdamped to overdamped coupling via the EP by utilizing photon-assisted tunneling as an \emph{in situ} tunable dissipative element in one of the resonators. The methods studied here can be applied to different circuits to obtain fast dissipation, for example, for initializing qubits to their ground states. In addition, these results pave the way towards thorough investigation of parity--time ($\mathcal{PT}$) symmetric systems and the spontaneous symmetry breaking in superconducting microwave circuits operating at the level of single energy quanta. △ Less

Submitted 6 December, 2018; originally announced December 2018.

Journal ref: Phys. Rev. B 100, 134505 (2019)

Qubit Measurement by Multichannel Driving

Authors: Joni Ikonen, Jan Goetz, Jesper Ilves, Aarne Keränen, Andras M. Gunyho, Matti Partanen, Kuan Y. Tan, Dibyendu Hazra, Leif Grönberg, Visa Vesterinen, Slawomir Simbierowicz, Juha Hassel, Mikko Möttönen

Abstract: We theoretically propose and experimentally implement a method of measuring a qubit by driving it close to the frequency of a dispersively coupled bosonic mode. The separation of the bosonic states corresponding to different qubit states begins essentially immediately at maximum rate, leading to a speedup in the measurement protocol. Also the bosonic mode can be simultaneously driven to optimize m… ▽ More We theoretically propose and experimentally implement a method of measuring a qubit by driving it close to the frequency of a dispersively coupled bosonic mode. The separation of the bosonic states corresponding to different qubit states begins essentially immediately at maximum rate, leading to a speedup in the measurement protocol. Also the bosonic mode can be simultaneously driven to optimize measurement speed and fidelity. We experimentally test this measurement protocol using a superconducting qubit coupled to a resonator mode. For a certain measurement time, we observe that the conventional dispersive readout yields close to 100% higher average measurement error than our protocol. Finally, we use an additional resonator drive to leave the resonator state to vacuum if the qubit is in the ground state during the measurement protocol. This suggests that the proposed measurement technique may become useful in unconditionally resetting the resonator to a vacuum state after the measurement pulse. △ Less

Submitted 25 February, 2019; v1 submitted 12 October, 2018; originally announced October 2018.

Comments: Includes supplementary information

Journal ref: Phys. Rev. Lett. 122, 080503 (2019)

Observation of a broadband Lamb shift in an engineered quantum system

Authors: Matti Silveri, Shumpei Masuda, Vasilii Sevriuk, Kuan Y. Tan, Máté Jenei, Eric Hyyppä, Fabian Hassler, Matti Partanen, Jan Goetz, Russell E. Lake, Leif Grönberg, Mikko Möttönen

Abstract: The shift of energy levels owing to broadband electromagnetic vacuum fluctuations, the Lamb shift, has been pivotal in the development of quantum electrodynamics and in understanding atomic spectra. Currently, small energy shifts in engineered quantum systems are of paramount importance owing to the extreme precision requirements in applications such as quantum computing. However, without a tunabl… ▽ More The shift of energy levels owing to broadband electromagnetic vacuum fluctuations, the Lamb shift, has been pivotal in the development of quantum electrodynamics and in understanding atomic spectra. Currently, small energy shifts in engineered quantum systems are of paramount importance owing to the extreme precision requirements in applications such as quantum computing. However, without a tunable environment it is challenging to resolve the Lamb shift in its original broadband case. Consequently, the observations in other than atomic systems are limited to environments comprised of narrow-band modes. Here, we observe a broadband Lamb shift in high-quality superconducting resonators, a scenario also accessing static shifts inaccessible in Lamb's experiment. We measure a continuous change of several megahertz in the fundamental resonator frequency by externally tuning the coupling strength of the engineered broadband environment which is based on hybrid normal-metal--superconductor tunnel junctions. Our results may lead to improved control of dissipation in high-quality engineered quantum systems and open new possibilities for studying synthetic open quantum matter using this hybrid experimental platform. △ Less

Submitted 1 February, 2019; v1 submitted 4 September, 2018; originally announced September 2018.

Journal ref: Nat. Phys. 15, 533 (2019)