Showing 1–50 of 54 results for author: Gasparinetti, S

Microwave dynamics of gated Al/InAs superconducting nanowires

Authors: Vittorio Buccheri, François Joint, Kazi Rafsamjani Amin, Tosson Elalaily, Olivér Kürtössy, Zoltán Scherübl, Gergő Fülöp, Thomas Kanne, Jesper Nygård, Péter Makk, Szabolcs Csonka, Simone Gasparinetti

Abstract: Several experiments have recently reported on gate-tunable superconducting properties in metallic devices, holding promise for the realization of cryogenic switches, tunable resonators, and superconducting logic. In particular, the suppression of the critical current as a function of the gate voltage has been widely investigated. However, time-domain studies are discussed only in a few cases. In t… ▽ More Several experiments have recently reported on gate-tunable superconducting properties in metallic devices, holding promise for the realization of cryogenic switches, tunable resonators, and superconducting logic. In particular, the suppression of the critical current as a function of the gate voltage has been widely investigated. However, time-domain studies are discussed only in a few cases. In this paper, we present a microwave characterization of a gate-controlled Al-capped InAs nanowire embedded in a $λ/4$ coplanar waveguide resonator. We observe a shift in the resonator frequency and an increase in its internal losses as a function of the gate voltage, which we relate to a change in the imaginary and real components of the nanowire impedance, respectively. We demonstrate that these changes are described by the Mattis-Bardeen model with an effective temperature. We further study the resonator response to fast gate signals and measure characteristic response times of the order of 40 ns, both in time-domain and parametric modulation experiments. Our study elucidates the impact of the gate on the complex impedance of the nanowire in the superconducting state, as well as its dynamic performance, providing a foundation for the design of gate-controlled superconducting devices. △ Less

Submitted 25 February, 2025; originally announced February 2025.

Deterministic generation of frequency-bin-encoded microwave photons

Authors: Jiaying Yang, Maryam Khanahmadi, Ingrid Strandberg, Akshay Gaikwad, Claudia Castillo-Moreno, Anton Frisk Kockum, Muhammad Asad Ullah, Göran Johansson, Axel Martin Eriksson, Simone Gasparinetti

Abstract: A distributed quantum computing network requires a quantum communication channel between spatially separated processing units. In superconducting circuits, such a channel can be implemented based on propagating microwave photons to encode and transfer quantum information between an emitter and a receiver. However, traveling microwave photons can be lost during the transmission, leading to the fail… ▽ More A distributed quantum computing network requires a quantum communication channel between spatially separated processing units. In superconducting circuits, such a channel can be implemented based on propagating microwave photons to encode and transfer quantum information between an emitter and a receiver. However, traveling microwave photons can be lost during the transmission, leading to the failure of information transfer. Heralding protocols can be used to detect such photon losses. In this work, we propose such a protocol and experimentally demonstrate a frequency-bin encoding method of microwave photonic modes using superconducting circuits. We deterministically encode the quantum information from a superconducting qubit by simultaneously emitting its information into two photonic modes at different frequencies, with a process fidelity of 90.4%. The frequency-bin-encoded photonic modes can be used, at the receiver processor, to detect the occurrence of photon loss. Our work thus provides a reliable method to implement high-fidelity quantum state transfer in a distributed quantum computing network, incorporating error detection to enhance performance and accuracy. △ Less

Submitted 4 July, 2025; v1 submitted 30 October, 2024; originally announced October 2024.

Journal ref: Physical Review Letters 134, 240803 (2025)

Entanglement of photonic modes from a continuously driven two-level system

Authors: Jiaying Yang, Ingrid Strandberg, Alejandro Vivas-Viana, Akshay Gaikwad, Claudia Castillo-Moreno, Anton Frisk Kockum, Muhammad Asad Ullah, Carlos Sanchez Munoz, Axel Martin Eriksson, Simone Gasparinetti

Abstract: The ability to generate entangled states of light is a key primitive for quantum communication and distributed quantum computation. Continuously driven sources, including those based on spontaneous parametric downconversion, are usually probabilistic, whereas deterministic sources require accurate timing of the control fields. Here, we experimentally generate entangled photonic modes by continuous… ▽ More The ability to generate entangled states of light is a key primitive for quantum communication and distributed quantum computation. Continuously driven sources, including those based on spontaneous parametric downconversion, are usually probabilistic, whereas deterministic sources require accurate timing of the control fields. Here, we experimentally generate entangled photonic modes by continuously exciting a quantum emitter, a superconducting qubit, with a coherent drive, taking advantage of mode matching in the time and frequency domain. Using joint quantum state tomography and logarithmic negativity, we show that entanglement is generated between modes extracted from the two sidebands of the resonance fluorescence spectrum. Because the entangled photonic modes are perfectly orthogonal, they can be transferred into distinct quantum memories. Our approach can be utilized to distribute entanglement at a high rate in various physical platforms, with applications in waveguide quantum electrodynamics, distributed quantum computing, and quantum networks. △ Less

Submitted 28 April, 2025; v1 submitted 10 July, 2024; originally announced July 2024.

Precision is not limited by the second law of thermodynamics

Authors: Florian Meier, Yuri Minoguchi, Simon Sundelin, Tony J. G. Apollaro, Paul Erker, Simone Gasparinetti, Marcus Huber

Abstract: Physical devices operating out of equilibrium are inherently affected by thermal fluctuations, limiting their operational precision. This issue is pronounced at microscopic and especially quantum scales and can only be mitigated by incurring additional entropy dissipation. Understanding this constraint is crucial for both fundamental physics and technological design. For instance, clocks are inher… ▽ More Physical devices operating out of equilibrium are inherently affected by thermal fluctuations, limiting their operational precision. This issue is pronounced at microscopic and especially quantum scales and can only be mitigated by incurring additional entropy dissipation. Understanding this constraint is crucial for both fundamental physics and technological design. For instance, clocks are inherently governed by the second law of thermodynamics and need a thermodynamic flux towards equilibrium to measure time, which results in a minimum entropy dissipation per clock tick. Classical and quantum models and experiments often show a linear relationship between precision and dissipation, but the ultimate bounds on this relationship are unknown. Our theoretical discovery presents an extensible quantum many-body system that achieves clock precision scaling exponentially with entropy dissipation. This finding demonstrates that coherent quantum dynamics can surpass the traditional thermodynamic precision limits, potentially guiding the development of future high-precision, low-dissipation quantum devices. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Comments: 6 + 14 pages, 9 figures, comments welcome

Dynamical excitation control and multimode emission of an atom-photon bound state

Authors: Claudia Castillo-Moreno, Kazi Rafsanjani Amin, Ingrid Strandberg, Mikael Kervinen, Amr Osman, Simone Gasparinetti

Abstract: Atom-photon bound states arise from the coupling of quantum emitters to the band edge of dispersion-engineered waveguides. Thanks to their tunable-range interactions, they are promising building blocks for quantum simulators. Here, we study the dynamics of an atom-photon bound state emerging from coupling a frequency-tunable quantum emitter - a transmon-type superconducting circuit - to the band e… ▽ More Atom-photon bound states arise from the coupling of quantum emitters to the band edge of dispersion-engineered waveguides. Thanks to their tunable-range interactions, they are promising building blocks for quantum simulators. Here, we study the dynamics of an atom-photon bound state emerging from coupling a frequency-tunable quantum emitter - a transmon-type superconducting circuit - to the band edge of a microwave metamaterial. Employing precise temporal control over the frequency detuning of the emitter from the band edge, we examine the transition from adiabatic to non-adiabatic behavior in the formation of the bound state and its melting into the propagating modes of the metamaterial. Moreover, we experimentally observe multi-mode emission from the bound state, triggered by a fast change of the emitter's frequency. Our study offers insight into the dynamic preparation of atom-photon bound states and provides a method to characterize their photonic content, with implications in quantum optics and quantum simulation. △ Less

Submitted 4 April, 2025; v1 submitted 8 April, 2024; originally announced April 2024.

Comments: 8 pages (4 figures) + supplementary information (5 pages)

Journal ref: Phys. Rev. Lett. 134, 133601 (2025)

Direct detection of quasiparticle tunneling with a charge-sensitive superconducting sensor coupled to a waveguide

Authors: Kazi Rafsanjani Amin, Axel M. Eriksson, Mikael Kervinen, Linus Andersson, Robert Rehammar, Simone Gasparinetti

Abstract: Detecting quasiparticle tunneling events in superconducting circuits provides information about the population and dynamics of non-equilibrium quasiparticles. Such events can be detected by monitoring changes in the frequency of an offset-charge-sensitive superconducting qubit. This monitoring has so far been performed by Ramsey interferometry assisted by a readout resonator. Here, we demonstrate… ▽ More Detecting quasiparticle tunneling events in superconducting circuits provides information about the population and dynamics of non-equilibrium quasiparticles. Such events can be detected by monitoring changes in the frequency of an offset-charge-sensitive superconducting qubit. This monitoring has so far been performed by Ramsey interferometry assisted by a readout resonator. Here, we demonstrate a quasiparticle detector based on a superconducting qubit directly coupled to a waveguide. We directly measure quasiparticle number parity on the qubit island by probing the coherent scattering of a microwave tone, offering simplicity of operation, fast detection speed, and a large signal-to-noise ratio. We observe tunneling rates between 0.8 and $7~\rm{s}^{-1}$, depending on the average occupation of the detector qubit, and achieve a temporal resolution below $10~μ\rm{s}$ without a quantum-limited amplifier. Our simple and efficient detector lowers the barrier to perform studies of quasiparticle population and dynamics, facilitating progress in fundamental science, quantum information processing, and sensing. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Quantum refrigeration powered by noise in a superconducting circuit

Authors: Simon Sundelin, Mohammed Ali Aamir, Vyom Manish Kulkarni, Claudia Castillo-Moreno, Simone Gasparinetti

Abstract: While dephasing noise frequently presents obstacles for quantum devices, it can become an asset in the context of a Brownian-type quantum refrigerator. Here we demonstrate a novel quantum thermal machine that leverages noise-assisted quantum transport to fuel a cooling engine in steady state. The device exploits symmetry-selective couplings between a superconducting artificial molecule and two mic… ▽ More While dephasing noise frequently presents obstacles for quantum devices, it can become an asset in the context of a Brownian-type quantum refrigerator. Here we demonstrate a novel quantum thermal machine that leverages noise-assisted quantum transport to fuel a cooling engine in steady state. The device exploits symmetry-selective couplings between a superconducting artificial molecule and two microwave waveguides. These waveguides act as thermal reservoirs of different temperatures, which we regulate by employing synthesized thermal fields. We inject dephasing noise through a third channel that is longitudinally coupled to an artificial atom of the molecule. By varying the relative temperatures of the reservoirs, and measuring heat currents with a resolution below 1 aW, we demonstrate that the device can be operated as a quantum heat engine, thermal accelerator, and refrigerator. Our findings open new avenues for investigating quantum thermodynamics using superconducting quantum machines coupled to thermal microwave waveguides. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Digital homodyne and heterodyne detection for stationary bosonic modes

Authors: Ingrid Strandberg, Axel Eriksson, Baptiste Royer, Mikael Kervinen, Simone Gasparinetti

Abstract: Homo- and heterodyne detection are fundamental techniques for measuring propagating electromagnetic fields. However, applying these techniques to stationary fields confined in cavities poses a challenge. As a way to overcome this challenge, we propose to use repeated indirect measurements of a two-level system interacting with the cavity. We demonstrate numerically that the proposed measurement sc… ▽ More Homo- and heterodyne detection are fundamental techniques for measuring propagating electromagnetic fields. However, applying these techniques to stationary fields confined in cavities poses a challenge. As a way to overcome this challenge, we propose to use repeated indirect measurements of a two-level system interacting with the cavity. We demonstrate numerically that the proposed measurement scheme faithfully reproduces measurement statistics of homo- or heterodyne detection at the single-shot level. The scheme can be implemented in various physical architectures, including circuit quantum electrodynamics. Our results pave the way to the implementation of quantum algorithms requiring linear detection, including quantum verification protocols, in stationary modes. △ Less

Submitted 22 December, 2023; originally announced December 2023.

Journal ref: Phys. Rev. Lett. 133, 063601 (2024)

Universal control of a bosonic mode via drive-activated native cubic interactions

Authors: Axel M. Eriksson, Théo Sépulcre, Mikael Kervinen, Timo Hillmann, Marina Kudra, Simon Dupouy, Yong Lu, Maryam Khanahmadi, Jiaying Yang, Claudia Castillo Moreno, Per Delsing, Simone Gasparinetti

Abstract: Linear bosonic modes offer a hardware-efficient alternative for quantum information processing but require access to some nonlinearity for universal control. The lack of nonlinearity in photonics has led to encoded measurement-based quantum computing, which rely on linear operations but requires access to resourceful ('nonlinear') quantum states, such as cubic phase states. In contrast, supercondu… ▽ More Linear bosonic modes offer a hardware-efficient alternative for quantum information processing but require access to some nonlinearity for universal control. The lack of nonlinearity in photonics has led to encoded measurement-based quantum computing, which rely on linear operations but requires access to resourceful ('nonlinear') quantum states, such as cubic phase states. In contrast, superconducting microwave circuits offer engineerable nonlinearities but suffer from static Kerr nonlinearity. Here, we demonstrate universal control of a bosonic mode composed of a superconducting nonlinear asymmetric inductive element (SNAIL) resonator, enabled by native nonlinearities in the SNAIL element. We suppress static nonlinearities by operating the SNAIL in the vicinity of its Kerr-free point and dynamically activate nonlinearities up to third order by fast flux pulses. We experimentally realize a universal set of generalized squeezing operations, as well as the cubic phase gate, and exploit them to deterministically prepare a cubic phase state in 60 ns. Our results initiate the experimental field of universal continuous-variables quantum computing. △ Less

Submitted 22 September, 2023; v1 submitted 29 August, 2023; originally announced August 2023.

Comments: 11 pages, 6 figures and supplementary materials

Key Issues Review: Useful autonomous quantum machines

Authors: José Antonio Marín Guzmán, Paul Erker, Simone Gasparinetti, Marcus Huber, Nicole Yunger Halpern

Abstract: Controlled quantum machines have matured significantly. A natural next step is to increasingly grant them autonomy, freeing them from time-dependent external control. For example, autonomy could pare down the classical control wires that heat and decohere quantum circuits; and an autonomous quantum refrigerator recently reset a superconducting qubit to near its ground state, as is necessary before… ▽ More Controlled quantum machines have matured significantly. A natural next step is to increasingly grant them autonomy, freeing them from time-dependent external control. For example, autonomy could pare down the classical control wires that heat and decohere quantum circuits; and an autonomous quantum refrigerator recently reset a superconducting qubit to near its ground state, as is necessary before a computation. Which fundamental conditions are necessary for realizing useful autonomous quantum machines? Inspired by recent quantum thermodynamics and chemistry, we posit conditions analogous to DiVincenzo's criteria for quantum computing. Furthermore, we illustrate the criteria with multiple autonomous quantum machines (refrigerators, circuits, clocks, etc.) and multiple candidate platforms (neutral atoms, molecules, superconducting qubits, etc.). Our criteria are intended to foment and guide the development of useful autonomous quantum machines. △ Less

Submitted 8 June, 2025; v1 submitted 17 July, 2023; originally announced July 2023.

Comments: Close to published version. Corrected minor typos

Journal ref: Rep. Prog. Phys. 87, 12 (2024)

Thermally driven quantum refrigerator autonomously resets superconducting qubit

Authors: Mohammed Ali Aamir, Paul Jamet Suria, José Antonio Marín Guzmán, Claudia Castillo-Moreno, Jeffrey M. Epstein, Nicole Yunger Halpern, Simone Gasparinetti

Abstract: Although classical thermal machines power industries and modern living, quantum thermal engines have yet to prove their utility. Here, we demonstrate a useful quantum absorption refrigerator formed from superconducting circuits. We use it to cool a transmon qubit to a temperature lower than that achievable with any one available bath, thereby resetting the qubit to an initial state suitable for qu… ▽ More Although classical thermal machines power industries and modern living, quantum thermal engines have yet to prove their utility. Here, we demonstrate a useful quantum absorption refrigerator formed from superconducting circuits. We use it to cool a transmon qubit to a temperature lower than that achievable with any one available bath, thereby resetting the qubit to an initial state suitable for quantum computing. The process is driven by a thermal gradient and is autonomous, requiring no external feedback. The refrigerator exploits an engineered three-body interaction between the target qubit and two auxiliary qudits. Each auxiliary qudit is coupled to a physical heat bath, realized with a microwave waveguide populated with synthesized quasithermal radiation. If the target qubit is initially fully excited, its effective temperature reaches a steady-state level of approximately 22~mK, lower than what can be achieved by existing state-of-the-art reset protocols. Our results demonstrate that superconducting circuits with propagating thermal fields can be used to experimentally explore quantum thermodynamics and apply it to quantum information-processing tasks. △ Less

Submitted 18 March, 2025; v1 submitted 26 May, 2023; originally announced May 2023.

Comments: 9 pages (4 figures) + supplementary information (9 pages)

Journal ref: Nature Physics 21, 318 - 323 (2025)

Deterministic generation of shaped single microwave photons using a parametrically driven coupler

Authors: Jiaying Yang, Axel Eriksson, Mohammed Ali Aamir, Ingrid Strandberg, Claudia Castillo Moreno, Daniel Perez Lozano, Per Persson, Simone Gasparinetti

Abstract: A distributed quantum computing system requires a quantum communication channel between spatially separated processing units. In superconducting circuits, such a channel can be realized by using propagating microwave photons to encode and transfer quantum information between an emitter and a receiver node. Here we experimentally demonstrate a superconducting circuit that deterministically transfer… ▽ More A distributed quantum computing system requires a quantum communication channel between spatially separated processing units. In superconducting circuits, such a channel can be realized by using propagating microwave photons to encode and transfer quantum information between an emitter and a receiver node. Here we experimentally demonstrate a superconducting circuit that deterministically transfers the state of a data qubit into a propagating microwave mode, with a process fidelity of 94.5%. We use a time-varying parametric drive to shape the temporal profile of the propagating mode to be time-symmetric and with constant phase, so that reabsorption by the receiving processor can be implemented as a time-reversed version of the emission. We demonstrate a self-calibrating routine to correct for time-dependent shifts of the emitted frequencies due to the modulation of the parametric drive. Our work provides a reliable method to implement high-fidelity quantum state transfer and remote entanglement operations in a distributed quantum computing network. △ Less

Submitted 2 December, 2023; v1 submitted 6 March, 2023; originally announced March 2023.

Quantum process tomography of continuous-variable gates using coherent states

Authors: Mikael Kervinen, Shahnawaz Ahmed, Marina Kudra, Axel Eriksson, Fernando Quijandría, Anton Frisk Kockum, Per Delsing, Simone Gasparinetti

Abstract: Encoding quantum information into superpositions of multiple Fock states of a harmonic oscillator can provide protection against errors, but it comes with the cost of requiring more complex quantum gates that need to address multiple Fock states simultaneously. Therefore, characterizing the quantum process fidelity of these gates also becomes more challenging. Here, we demonstrate the use of coher… ▽ More Encoding quantum information into superpositions of multiple Fock states of a harmonic oscillator can provide protection against errors, but it comes with the cost of requiring more complex quantum gates that need to address multiple Fock states simultaneously. Therefore, characterizing the quantum process fidelity of these gates also becomes more challenging. Here, we demonstrate the use of coherent-state quantum process tomography (csQPT) for a bosonic-mode superconducting circuit. CsQPT uses coherent states as input probes for the quantum process in order to completely characterize the quantum operation for an arbitrary input state. We show results for this method by characterizing a logical quantum gate constructed using displacement and SNAP operations on an encoded qubit. With csQPT, we are able to reconstruct the Kraus operators for the larger Hilbert space rather than being limited to the logical subspace. This allows for a more accurate determination of the different error mechanisms that lead to the gate infidelity. △ Less

Submitted 2 March, 2023; originally announced March 2023.

Experimental realization of deterministic and selective photon addition in a bosonic mode assisted by an ancillary qubit

Authors: Marina Kudra, Martin Jirlow, Mikael Kervinen, Axel M. Eriksson, Fernando Quijandría, Per Delsing, Tahereh Abad, Simone Gasparinetti

Abstract: Bosonic quantum error correcting codes are primarily designed to protect against single-photon loss. To correct for this type of error, one can encode the logical qubit in code spaces with a definite photon parity, such as cat codes or binomial codes. Error correction requires a recovery operation that maps the error states -- which have opposite parity -- back onto the code states. Here, we reali… ▽ More Bosonic quantum error correcting codes are primarily designed to protect against single-photon loss. To correct for this type of error, one can encode the logical qubit in code spaces with a definite photon parity, such as cat codes or binomial codes. Error correction requires a recovery operation that maps the error states -- which have opposite parity -- back onto the code states. Here, we realize a collection of photon-number-selective, simultaneous photon addition operations on a bosonic mode, a microwave cavity, assisted by a superconducting qubit. These operations are implemented as two-photon transitions that excite the cavity and the qubit at the same time. The additional degree of freedom of the qubit makes it possible to implement a coherent, unidirectional mapping between spaces of opposite photon parity. We present the successful experimental implementation of the drives and the phase control they enable on superpositions of Fock states. The presented technique, when supplemented with qubit reset, is suitable for autonomous quantum error correction in bosonic systems, and, more generally, opens the possibility to realize a range of non-unitary transformations on a bosonic mode. △ Less

Submitted 28 March, 2025; v1 submitted 22 December, 2022; originally announced December 2022.

Comments: 9+5 pages

Measurement and control of a superconducting quantum processor with a fully-integrated radio-frequency system on a chip

Authors: Mats O. Tholén, Riccardo Borgani, Giuseppe Ruggero Di Carlo, Andreas Bengtsson, Christian Križan, Marina Kudra, Giovanna Tancredi, Jonas Bylander, Per Delsing, Simone Gasparinetti, David B. Haviland

Abstract: We describe a digital microwave platform called Presto, designed for measurement and control of multiple quantum bits (qubits) and based on the third-generation radio-frequency system on a chip. Presto uses direct digital synthesis to create signals up to 9 GHz on 16 synchronous output ports, while synchronously analyzing response on 16 input ports. Presto has 16 DC-bias outputs, 4 inputs and 4 ou… ▽ More We describe a digital microwave platform called Presto, designed for measurement and control of multiple quantum bits (qubits) and based on the third-generation radio-frequency system on a chip. Presto uses direct digital synthesis to create signals up to 9 GHz on 16 synchronous output ports, while synchronously analyzing response on 16 input ports. Presto has 16 DC-bias outputs, 4 inputs and 4 outputs for digital triggers or markers, and two continuous-wave outputs for synthesizing frequencies up to 15 GHz. Scaling to a large number of qubits is enabled through deterministic synchronization of multiple Presto units. A Python application programming interface configures a firmware for synthesis and analysis of pulses, coordinated by an event sequencer. The analysis integrates template matching (matched filtering) and low-latency (184 - 254 ns) feedback to enable a wide range of multi-qubit experiments. We demonstrate Presto's capabilities with experiments on a sample consisting of two superconducting qubits connected via a flux-tunable coupler. We show single-shot readout and active reset of a single qubit; randomized benchmarking of single-qubit gates showing 99.972% fidelity, limited by the coherence time of the qubit; and calibration of a two-qubit iSWAP gate. △ Less

Submitted 31 October, 2022; v1 submitted 30 May, 2022; originally announced May 2022.

Comments: v3: peer reviewed, accepted manuscript; v2: correct theoretical gate fidelity in Sec. III C

Journal ref: Review of Scientific Instruments 93, 104711 (2022)

Low-pass filter with ultra-wide stopband for quantum computing applications

Authors: Robert Rehammar, Simone Gasparinetti

Abstract: A new type of low-pass filter based on a leaky coaxial waveguide is presented. The filter has minimal insertion loss in the pass band, while at the same time high attenuation in the stop band is achieved. Thanks to its arrangement, the filter does not present parasitic leakage paths, so that, unlike conventional resonant filters, the stop band extends to very high frequencies. It is shown that a p… ▽ More A new type of low-pass filter based on a leaky coaxial waveguide is presented. The filter has minimal insertion loss in the pass band, while at the same time high attenuation in the stop band is achieved. Thanks to its arrangement, the filter does not present parasitic leakage paths, so that, unlike conventional resonant filters, the stop band extends to very high frequencies. It is shown that a particular stop-band attenuation can be obtained by adding or removing leaking sections. Coupling between the center coaxial structure and the leaking holes is investigated. A prototype is manufactured and scattering parameters are measured up to 145 GHz. The prototype shows an insertion loss of less than 0.15 dB up to 10 GHz and an attenuation in excess of 60 dB above 70 GHz. The proposed filter is suitable for superconducting quantum computing applications where qubits are sensitive to radiation with energy high enough to break Cooper-pairs, thereby destroying superconductivity. △ Less

Submitted 8 May, 2022; originally announced May 2022.

Engineering symmetry-selective couplings of a superconducting artificial molecule to microwave waveguides

Authors: Mohammed Ali Aamir, Claudia Castillo Moreno, Simon Sundelin, Janka Biznárová, Marco Scigliuzzo, Kowshik Erappaji Patel, Amr Osman, D. P. Lozano, Simone Gasparinetti

Abstract: Tailoring the decay rate of structured quantum emitters into their environment opens new avenues for nonlinear quantum optics, collective phenomena, and quantum communications. Here we demonstrate a novel coupling scheme between an artificial molecule comprising two identical, strongly coupled transmon qubits, and two microwave waveguides. In our scheme, the coupling is engineered so that transiti… ▽ More Tailoring the decay rate of structured quantum emitters into their environment opens new avenues for nonlinear quantum optics, collective phenomena, and quantum communications. Here we demonstrate a novel coupling scheme between an artificial molecule comprising two identical, strongly coupled transmon qubits, and two microwave waveguides. In our scheme, the coupling is engineered so that transitions between states of the same (opposite) symmetry, with respect to the permutation operator, are predominantly coupled to one (the other) waveguide. The symmetry-based coupling selectivity, as quantified by the ratio of the coupling strengths, exceeds a factor of 30 for both the waveguides in our device. In addition, we implement a two-photon Raman process activated by simultaneously driving both waveguides, and show that it can be used to coherently couple states of different symmetry in the single-excitation manifold of the molecule. Using that process, we implement frequency conversion across the waveguides, mediated by the molecule, with efficiency of about 95%. Finally, we show that this coupling arrangement makes it possible to straightforwardly generate spatially-separated Bell states propagating across the waveguides. We envisage further applications to quantum thermodynamics, microwave photodetection, and photon-photon gates. △ Less

Submitted 24 February, 2022; originally announced February 2022.

Robust preparation of Wigner-negative states with optimized SNAP-displacement sequences

Authors: Marina Kudra, Mikael Kervinen, Ingrid Strandberg, Shahnawaz Ahmed, Marco Scigliuzzo, Amr Osman, Daniel Pérez Lozano, Mats O. Tholén, Riccardo Borgani, David B. Haviland, Giulia Ferrini, Jonas Bylander, Anton Frisk Kockum, Fernando Quijandría, Per Delsing, Simone Gasparinetti

Abstract: Hosting non-classical states of light in three-dimensional microwave cavities has emerged as a promising paradigm for continuous-variable quantum information processing. Here we experimentally demonstrate high-fidelity generation of a range of Wigner-negative states useful for quantum computation, such as Schrödinger-cat states, binomial states, Gottesman-Kitaev-Preskill (GKP) states, as well as c… ▽ More Hosting non-classical states of light in three-dimensional microwave cavities has emerged as a promising paradigm for continuous-variable quantum information processing. Here we experimentally demonstrate high-fidelity generation of a range of Wigner-negative states useful for quantum computation, such as Schrödinger-cat states, binomial states, Gottesman-Kitaev-Preskill (GKP) states, as well as cubic phase states. The latter states have been long sought after in quantum optics and were never achieved experimentally before. To do so, we use a sequence of interleaved selective number-dependent arbitrary phase (SNAP) gates and displacements. We optimize the state preparation in two steps. First we use a gradient-descent algorithm to optimize the parameters of the SNAP and displacement gates. Then we optimize the envelope of the pulses implementing the SNAP gates. Our results show that this way of creating highly non-classical states in a harmonic oscillator is robust to fluctuations of the system parameters such as the qubit frequency and the dispersive shift. △ Less

Submitted 6 June, 2022; v1 submitted 15 November, 2021; originally announced November 2021.

Nonequilibrium heat transport and work with a single artificial atom coupled to a waveguide: emission without external driving

Authors: Yong Lu, Neill Lambert, Anton Frisk Kockum, Ken Funo, Andreas Bengtsson, Simone Gasparinetti, Franco Nori, Per Delsing

Abstract: We observe the continuous emission of photons into a waveguide from a superconducting qubit without the application of an external drive. To explain this observation, we build a two-bath model where the qubit couples simultaneously to a cold bath (the waveguide) and a hot bath (a secondary environment). Our results show that the thermal-photon occupation of the hot bath is up to 0.14 photons, 35 t… ▽ More We observe the continuous emission of photons into a waveguide from a superconducting qubit without the application of an external drive. To explain this observation, we build a two-bath model where the qubit couples simultaneously to a cold bath (the waveguide) and a hot bath (a secondary environment). Our results show that the thermal-photon occupation of the hot bath is up to 0.14 photons, 35 times larger than the cold waveguide, leading to nonequilibrium heat transport with a power of up to 132 zW, as estimated from the qubit emission spectrum. By adding more isolation between the sample output and the first cold amplifier in the output line, the heat transport is strongly suppressed. Our interpretation is that the hot bath may arise from active two-level systems being excited by noise from the output line. We also apply a coherent drive, and use the waveguide to measure thermodynamic work and heat, suggesting waveguide spectroscopy is a useful means to study quantum heat engines and refrigerators. Finally, based on the theoretical model, we propose how a similar setup can be used as a noise spectrometer which provides a new solution for calibrating the background noise of hybrid quantum systems. △ Less

Submitted 27 July, 2021; originally announced July 2021.

Journal ref: PRX Quantum 3, 020305 (2022)

Extensible quantum simulation architecture based on atom-photon bound states in an array of high-impedance resonators

Authors: Marco Scigliuzzo, Giuseppe Calajò, Francesco Ciccarello, Daniel Perez Lozano, Andreas Bengtsson, Pasquale Scarlino, Andreas Wallraff, Darrick Chang, Per Delsing, Simone Gasparinetti

Abstract: Engineering the electromagnetic environment of a quantum emitter gives rise to a plethora of exotic light-matter interactions. In particular, photonic lattices can seed long-lived atom-photon bound states inside photonic band gaps. Here we report on the concept and implementation of a novel microwave architecture consisting of an array of compact, high-impedance superconducting resonators forming… ▽ More Engineering the electromagnetic environment of a quantum emitter gives rise to a plethora of exotic light-matter interactions. In particular, photonic lattices can seed long-lived atom-photon bound states inside photonic band gaps. Here we report on the concept and implementation of a novel microwave architecture consisting of an array of compact, high-impedance superconducting resonators forming a 1 GHz-wide pass band, in which we have embedded two frequency-tuneable artificial atoms. We study the atom-field interaction and access previously unexplored coupling regimes, in both the single- and double-excitation subspace. In addition, we demonstrate coherent interactions between two atom-photon bound states, in both resonant and dispersive regimes, that are suitable for the implementation of SWAP and CZ two-qubit gates. The presented architecture holds promise for quantum simulation with tuneable-range interactions and photon transport experiments in nonlinear regime. △ Less

Submitted 14 July, 2021; originally announced July 2021.

Propagating Wigner-Negative States Generated from the Steady-State Emission of a Superconducting Qubit

Authors: Yong Lu, Ingrid Strandberg, Fernando Quijandría, Göran Johansson, Simone Gasparinetti, Per Delsing

Abstract: We experimentally demonstrate the steady-state generation of propagating Wigner-negative states from a continuously driven superconducting qubit. We reconstruct the Wigner function of the radiation emitted into propagating modes defined by their temporal envelopes, using digital filtering. For an optimized temporal filter, we observe a large Wigner logarithmic negativity, in excess of 0.08, in agr… ▽ More We experimentally demonstrate the steady-state generation of propagating Wigner-negative states from a continuously driven superconducting qubit. We reconstruct the Wigner function of the radiation emitted into propagating modes defined by their temporal envelopes, using digital filtering. For an optimized temporal filter, we observe a large Wigner logarithmic negativity, in excess of 0.08, in agreement with theory. The fidelity between the theoretical predictions and the states generated experimentally is up to 99%, reaching state-of-the-art realizations in the microwave frequency domain. Our results provide a new way to generate and control nonclassical states, and may enable promising applications such as quantum networks and quantum computation based on waveguide quantum electrodynamics. △ Less

Submitted 26 July, 2021; v1 submitted 23 January, 2021; originally announced January 2021.

Comments: 15

Journal ref: Phys. Rev. Lett. 126, 253602 (2021)

High Quality 3-Dimensional Aluminum Microwave Cavities

Authors: M. Kudra, J. Biznárová, F. Roudsari, J. J. Burnett, D. Niepce, S. Gasparinetti, B. Wickman, P. Delsing

Abstract: We present a comprehensive study of internal quality factors in superconducting stub-geometry 3-dimensional cavities made of aluminum. We use wet etching, annealing and electrochemichal polishing to improve the as machined quality factor. We find that the dominant loss channel is split between two-level system loss and an unknown source with 60:40 proportion. A total of 17 cavities of different pu… ▽ More We present a comprehensive study of internal quality factors in superconducting stub-geometry 3-dimensional cavities made of aluminum. We use wet etching, annealing and electrochemichal polishing to improve the as machined quality factor. We find that the dominant loss channel is split between two-level system loss and an unknown source with 60:40 proportion. A total of 17 cavities of different purity, resonance frequency and size were studied. Our treatment results in reproducible cavities, with ten of them showing internal quality factors above 80 million at a power corresponding to an average of a single photon in the cavity. The best cavity has an internal quality factor of 115 million at single photon level. △ Less

Submitted 3 June, 2020; originally announced June 2020.

Primary thermometry of propagating microwaves in the quantum regime

Authors: Marco Scigliuzzo, Andreas Bengtsson, Jean-Claude Besse, Andreas Wallraff, Per Delsing, Simone Gasparinetti

Abstract: The ability to control and measure the temperature of propagating microwave modes down to very low temperatures is indispensable for quantum information processing, and may open opportunities for studies of heat transport at the nanoscale, also in the quantum regime. Here we propose and experimentally demonstrate primary thermometry of propagating microwaves using a transmon-type superconducting c… ▽ More The ability to control and measure the temperature of propagating microwave modes down to very low temperatures is indispensable for quantum information processing, and may open opportunities for studies of heat transport at the nanoscale, also in the quantum regime. Here we propose and experimentally demonstrate primary thermometry of propagating microwaves using a transmon-type superconducting circuit. Our device operates continuously, with a sensitivity down to $4\times 10^{-4}$ photons/$\sqrt{\mbox{Hz}}$ and a bandwidth of 40 MHz. We measure the thermal occupation of the modes of a highly attenuated coaxial cable in a range of 0.001 to 0.4 thermal photons, corresponding to a temperature range from 35 mK to 210 mK at a frequency around 5 GHz. To increase the radiation temperature in a controlled fashion, we either inject calibrated, wideband digital noise, or heat the device and its environment. This thermometry scheme can find applications in benchmarking and characterization of cryogenic microwave setups, temperature measurements in hybrid quantum systems, and quantum thermodynamics. △ Less

Submitted 30 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. X 10, 041054 (2020)

Universal Gate Set for Continuous-Variable Quantum Computation with Microwave Circuits

Authors: Timo Hillmann, Fernando Quijandría, Göran Johansson, Alessandro Ferraro, Simone Gasparinetti, Giulia Ferrini

Abstract: We provide an explicit construction of a universal gate set for continuous-variable quantum computation with microwave circuits. Such a universal set has been first proposed in quantum-optical setups, but its experimental implementation has remained elusive in that domain due to the difficulties in engineering strong nonlinearities. Here, we show that a realistic three-wave mixing microwave archit… ▽ More We provide an explicit construction of a universal gate set for continuous-variable quantum computation with microwave circuits. Such a universal set has been first proposed in quantum-optical setups, but its experimental implementation has remained elusive in that domain due to the difficulties in engineering strong nonlinearities. Here, we show that a realistic three-wave mixing microwave architecture based on the SNAIL [Frattini et al., Appl. Phys. Lett. 110, 222603 (2017)] allows us to overcome this difficulty. As an application, we show that this architecture allows for the generation of a cubic phase state with an experimentally feasible procedure. This work highlights a practical advantage of microwave circuits with respect to optical systems for the purpose of engineering non-Gaussian states, and opens the quest for continuous-variable algorithms based on few repetitions of elementary gates from the continuous-variable universal set. △ Less

Submitted 15 October, 2020; v1 submitted 4 February, 2020; originally announced February 2020.

Comments: accepted version

Journal ref: Phys. Rev. Lett. 125, 160501 (2020)

Parity Detection of Propagating Microwave Fields

Authors: Jean-Claude Besse, Simone Gasparinetti, Michele C. Collodo, Theo Walter, Ants Remm, Jonas Krause, Christopher Eichler, Andreas Wallraff

Abstract: The parity of the number of elementary excitations present in a quantum system provides important insights into its physical properties. Parity measurements are used, for example, to tomographically reconstruct quantum states or to determine if a decay of an excitation has occurred, information which can be used for quantum error correction in computation or communication protocols. Here we demons… ▽ More The parity of the number of elementary excitations present in a quantum system provides important insights into its physical properties. Parity measurements are used, for example, to tomographically reconstruct quantum states or to determine if a decay of an excitation has occurred, information which can be used for quantum error correction in computation or communication protocols. Here we demonstrate a versatile parity detector for propagating microwaves, which distinguishes between radiation fields containing an even or odd number n of photons, both in a single-shot measurement and without perturbing the parity of the detected field. We showcase applications of the detector for direct Wigner tomography of propagating microwaves and heralded generation of Schrödinger cat states. This parity detection scheme is applicable over a broad frequency range and may prove useful, for example, for heralded or fault-tolerant quantum communication protocols. △ Less

Submitted 20 December, 2019; originally announced December 2019.

Journal ref: Phys. Rev. X 10, 011046 (2020)

Characterizing decoherence rates of a superconducting qubit by direct microwave scattering

Authors: Yong Lu, Andreas Bengtsson, Jonathan J. Burnett, Emely Wiegand, Baladitya Suri, Philip Krantz, Anita Fadavi Roudsari, Anton Frisk Kockum, Simone Gasparinetti, Göran Johansson, Per Delsing

Abstract: We experimentally investigate a superconducting qubit coupled to the end of an open transmission line, in a regime where the qubit decay rates to the transmission line and to its own environment are comparable. We perform measurements of coherent and incoherent scattering, on- and off-resonant fluorescence, and time-resolved dynamics to determine the decay and decoherence rates of the qubit. In pa… ▽ More We experimentally investigate a superconducting qubit coupled to the end of an open transmission line, in a regime where the qubit decay rates to the transmission line and to its own environment are comparable. We perform measurements of coherent and incoherent scattering, on- and off-resonant fluorescence, and time-resolved dynamics to determine the decay and decoherence rates of the qubit. In particular, these measurements let us discriminate between non-radiative decay and pure dephasing. We combine and contrast results across all methods and find consistent values for the extracted rates. The results show that the pure dephasing rate is one order of magnitude smaller than the non-radiative decay rate for our qubit. Our results indicate a pathway to benchmark decoherence rates of superconducting qubits in a resonator-free setting. △ Less

Submitted 4 December, 2019; originally announced December 2019.

Comments: 13 pages, 6 figures

Journal ref: npj Quantum Information 7, 35 (2021)

Two-Photon Resonance Fluorescence of a Ladder-Type Atomic System

Authors: Simone Gasparinetti, Jean-Claude Besse, Marek Pechal, Robin D. Buijs, Christopher Eichler, Howard J. Carmichael, Andreas Wallraff

Abstract: Multi-photon emitters are a sought-after resource in quantum photonics. Nonlinear interactions between a multi-level atomic system and a coherent drive can lead to resonant two-photon emission, but harvesting light from this process has remained a challenge due to the small oscillator strengths involved. Here we present a study of two-photon resonance fluorescence at microwave frequencies, using a… ▽ More Multi-photon emitters are a sought-after resource in quantum photonics. Nonlinear interactions between a multi-level atomic system and a coherent drive can lead to resonant two-photon emission, but harvesting light from this process has remained a challenge due to the small oscillator strengths involved. Here we present a study of two-photon resonance fluorescence at microwave frequencies, using a superconducting, ladder-type artificial atom, a transmon, strongly coupled to a waveguide. We drive the two-photon transition between the ground and second-excited state at increasingly high powers and observe a resonance fluorescence peak whose intensity becomes comparable to single-photon emission until it splits into a Mollow-like triplet. We measure photon correlations of frequency-filtered spectral lines and find that while emission at the fundamental frequency stays antibunched, the resonance fluorescence peak at the two-photon transition is superbunched. Our results provide a route towards the realization of multi-photon sources in the microwave domain. △ Less

Submitted 2 January, 2019; originally announced January 2019.

Journal ref: Phys. Rev. A 100, 033802 (2019)

Quantum communication with time-bin encoded microwave photons

Authors: Philipp Kurpiers, Marek Pechal, Baptiste Royer, Paul Magnard, Theo Walter, Johannes Heinsoo, Yves Salathé, Abdulkadir Akin, Simon Storz, Jean-Claude Besse, Simone Gasparinetti, Alexandre Blais, Andreas Wallraff

Abstract: Heralding techniques are useful in quantum communication to circumvent losses without resorting to error correction schemes or quantum repeaters. Such techniques are realized, for example, by monitoring for photon loss at the receiving end of the quantum link while not disturbing the transmitted quantum state. We describe and experimentally benchmark a scheme that incorporates error detection in a… ▽ More Heralding techniques are useful in quantum communication to circumvent losses without resorting to error correction schemes or quantum repeaters. Such techniques are realized, for example, by monitoring for photon loss at the receiving end of the quantum link while not disturbing the transmitted quantum state. We describe and experimentally benchmark a scheme that incorporates error detection in a quantum channel connecting two transmon qubits using traveling microwave photons. This is achieved by encoding the quantum information as a time-bin superposition of a single photon, which simultaneously realizes high communication rates and high fidelities. The presented scheme is straightforward to implement in circuit QED and is fully microwave-controlled, making it an interesting candidate for future modular quantum computing architectures. △ Less

Submitted 19 November, 2018; originally announced November 2018.

Journal ref: Phys. Rev. Applied 12, 044067 (2019)

Observation of the Crossover from Photon Ordering to Delocalization in Tunably Coupled Resonators

Authors: Michele C. Collodo, Anton Potočnik, Simone Gasparinetti, Jean-Claude Besse, Marek Pechal, Mahdi Sameti, Michael J. Hartmann, Andreas Wallraff, Christopher Eichler

Abstract: Networks of nonlinear resonators offer intriguing perspectives as quantum simulators for non-equilibrium many-body phases of driven-dissipative systems. Here, we employ photon correlation measurements to study the radiation fields emitted from a system of two superconducting resonators, coupled nonlinearly by a superconducting quantum interference device (SQUID). We apply a parametrically modulate… ▽ More Networks of nonlinear resonators offer intriguing perspectives as quantum simulators for non-equilibrium many-body phases of driven-dissipative systems. Here, we employ photon correlation measurements to study the radiation fields emitted from a system of two superconducting resonators, coupled nonlinearly by a superconducting quantum interference device (SQUID). We apply a parametrically modulated magnetic flux to control the linear photon hopping rate between the two resonators and its ratio with the cross-Kerr rate. When increasing the hopping rate, we observe a crossover from an ordered to a delocalized state of photons. The presented coupling scheme is intrinsically robust to frequency disorder and may therefore prove useful for realizing larger-scale resonator arrays. △ Less

Submitted 2 August, 2018; originally announced August 2018.

Journal ref: Phys. Rev. Lett. 122, 183601 (2019)

Coherent microwave photon mediated coupling between a semiconductor and a superconductor qubit

Authors: P. Scarlino, D. J. van Woerkom, U. C. Mendes, J. V. Koski, A. J. Landig, C. K. Andersen, S. Gasparinetti, C. Reichl, W. Wegscheider, K. Ensslin, T. Ihn, A. Blais, A. Wallraff

Abstract: Semiconductor qubits rely on the control of charge and spin degrees of freedom of electrons or holes confined in quantum dots (QDs). They constitute a promising approach to quantum information processing [1, 2], complementary to superconducting qubits [3]. Typically, semiconductor qubit-qubit coupling is short range [1, 2, 4, 5], effectively limiting qubit distance to the spatial extent of the wav… ▽ More Semiconductor qubits rely on the control of charge and spin degrees of freedom of electrons or holes confined in quantum dots (QDs). They constitute a promising approach to quantum information processing [1, 2], complementary to superconducting qubits [3]. Typically, semiconductor qubit-qubit coupling is short range [1, 2, 4, 5], effectively limiting qubit distance to the spatial extent of the wavefunction of the confined particle, which represents a significant constraint towards scaling to reach dense 1D or 2D arrays of QD qubits. Following the success of circuit quantum eletrodynamics [6], the strong coupling regime between the charge [7, 8] and spin [9, 10, 11] degrees of freedom of electrons confined in semiconducting QDs interacting with individual photons stored in a microwave resonator has recently been achieved. In this letter, we demonstrate coherent coupling between a superconducting transmon qubit and a semiconductor double quantum dot (DQD) charge qubit mediated by virtual microwave photon excitations in a tunable high-impedance SQUID array resonator acting as a quantum bus [12, 13, 14]. The transmon-charge qubit coherent coupling rate ($ \sim$ 21 MHz) exceeds the linewidth of both the transmon ($ \sim$ 0.8 MHz) and the DQD charge ($ \sim$ 3 MHz) qubit. By tuning the qubits into resonance for a controlled amount of time, we observe coherent oscillations between the constituents of this hybrid quantum system. These results enable a new class of experiments exploring the use of the two-qubit interactions mediated by microwave photons to create entangled states between semiconductor and superconducting qubits. The methods and techniques presented here are transferable to QD devices based on other material systems and can be beneficial for spin-based hybrid systems. △ Less

Submitted 26 June, 2018; originally announced June 2018.

Comments: 9 pages, 6 figures

Journal ref: Nature Communications 10, 3011 (2019)

Challenging local realism with human choices

Authors: The BIG Bell Test Collaboration, C. Abellán, A. Acín, A. Alarcón, O. Alibart, C. K. Andersen, F. Andreoli, A. Beckert, F. A. Beduini, A. Bendersky, M. Bentivegna, P. Bierhorst, D. Burchardt, A. Cabello, J. Cariñe, S. Carrasco, G. Carvacho, D. Cavalcanti, R. Chaves, J. Cortés-Vega, A. Cuevas, A. Delgado, H. de Riedmatten, C. Eichler, P. Farrera , et al. (83 additional authors not shown)

Abstract: A Bell test is a randomized trial that compares experimental observations against the philosophical worldview of local realism. A Bell test requires spatially distributed entanglement, fast and high-efficiency detection and unpredictable measurement settings. Although technology can satisfy the first two of these requirements, the use of physical devices to choose settings in a Bell test involves… ▽ More A Bell test is a randomized trial that compares experimental observations against the philosophical worldview of local realism. A Bell test requires spatially distributed entanglement, fast and high-efficiency detection and unpredictable measurement settings. Although technology can satisfy the first two of these requirements, the use of physical devices to choose settings in a Bell test involves making assumptions about the physics that one aims to test. Bell himself noted this weakness in using physical setting choices and argued that human `free will' could be used rigorously to ensure unpredictability in Bell tests. Here we report a set of local-realism tests using human choices, which avoids assumptions about predictability in physics. We recruited about 100,000 human participants to play an online video game that incentivizes fast, sustained input of unpredictable selections and illustrates Bell-test methodology. The participants generated 97,347,490 binary choices, which were directed via a scalable web platform to 12 laboratories on five continents, where 13 experiments tested local realism using photons, single atoms, atomic ensembles, and superconducting devices. Over a 12-hour period on 30 November 2016, participants worldwide provided a sustained data flow of over 1,000 bits per second to the experiments, which used different human-generated data to choose each measurement setting. The observed correlations strongly contradict local realism and other realistic positions in bipartite and tripartite scenarios. Project outcomes include closing the `freedom-of-choice loophole' (the possibility that the setting choices are influenced by `hidden variables' to correlate with the particle properties), the utilization of video-game methods for rapid collection of human generated randomness, and the use of networking techniques for global participation in experimental science. △ Less

Submitted 9 November, 2018; v1 submitted 11 May, 2018; originally announced May 2018.

Comments: This version includes minor changes resulting from reviewer and editorial input. Abstract shortened to fit within arXiv limits

Journal ref: Nature, volume 557, pages 212-216 (2018)

Rapid high-fidelity multiplexed readout of superconducting qubits

Authors: Johannes Heinsoo, Christian Kraglund Andersen, Ants Remm, Sebastian Krinner, Theodore Walter, Yves Salathé, Simone Gasparinetti, Jean-Claude Besse, Anton Potočnik, Christopher Eichler, Andreas Wallraff

Abstract: The duration and fidelity of qubit readout is a critical factor for applications in quantum information processing as it limits the fidelity of algorithms which reuse qubits after measurement or apply feedback based on the measurement result. Here we present fast multiplexed readout of five qubits in a single 1.2 GHz wide readout channel. Using a readout pulse length of 80 ns and populating readou… ▽ More The duration and fidelity of qubit readout is a critical factor for applications in quantum information processing as it limits the fidelity of algorithms which reuse qubits after measurement or apply feedback based on the measurement result. Here we present fast multiplexed readout of five qubits in a single 1.2 GHz wide readout channel. Using a readout pulse length of 80 ns and populating readout resonators for less than 250 ns we find an average correct assignment probability for the five measured qubits to be $97\%$. The differences between the individual readout errors and those found when measuring the qubits simultaneously are within $1\%$. We employ individual Purcell filters for each readout resonator to suppress off-resonant driving, which we characterize by the dephasing imposed on unintentionally measured qubits. We expect the here presented readout scheme to become particularly useful for the selective readout of individual qubits in multi-qubit quantum processors. △ Less

Submitted 24 January, 2018; originally announced January 2018.

Comments: 13 pages, 10 figures

Journal ref: Phys. Rev. Applied 10, 034040 (2018)

Fast and Unconditional All-Microwave Reset of a Superconducting Qubit

Authors: Paul Magnard, Philipp Kurpiers, Baptiste Royer, Theo Walter, Jean-Claude Besse, Simone Gasparinetti, Marek Pechal, Johannes Heinsoo, Simon Storz, Alexandre Blais, Andreas Wallraff

Abstract: Active qubit reset is a key operation in many quantum algorithms, and particularly in error correction codes. Here, we experimentally demonstrate a reset scheme of a three level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the $|f,0\rangle$ and $|g,1\rangle$ states of the coupled transmon-resonator system, with… ▽ More Active qubit reset is a key operation in many quantum algorithms, and particularly in error correction codes. Here, we experimentally demonstrate a reset scheme of a three level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the $|f,0\rangle$ and $|g,1\rangle$ states of the coupled transmon-resonator system, with $|g\rangle$ and $|f\rangle$ denoting the ground and second excited states of the transmon, and $|0\rangle$ and $|1\rangle$ the photon Fock states of the resonator. We characterize the reset process and demonstrate reinitialization of the transmon-resonator system to its ground state with $0.2\%$ residual excitation in less than $500 \, \rm{ns}$. Our protocol is of practical interest as it has no requirements on the architecture, beyond those for fast and efficient single-shot readout of the transmon, and does not require feedback. △ Less

Submitted 23 January, 2018; originally announced January 2018.

Journal ref: Phys. Rev. Lett. 121, 060502 (2018)

Deterministic Quantum State Transfer and Generation of Remote Entanglement using Microwave Photons

Authors: Philipp Kurpiers, Paul Magnard, Theo Walter, Baptiste Royer, Marek Pechal, Johannes Heinsoo, Yves Salathé, Abdulkadir Akin, Simon Storz, Jean-Claude Besse, Simone Gasparinetti, Alexandre Blais, Andreas Wallraff

Abstract: Sharing information coherently between nodes of a quantum network is at the foundation of distributed quantum information processing. In this scheme, the computation is divided into subroutines and performed on several smaller quantum registers connected by classical and quantum channels. A direct quantum channel, which connects nodes deterministically, rather than probabilistically, is advantageo… ▽ More Sharing information coherently between nodes of a quantum network is at the foundation of distributed quantum information processing. In this scheme, the computation is divided into subroutines and performed on several smaller quantum registers connected by classical and quantum channels. A direct quantum channel, which connects nodes deterministically, rather than probabilistically, is advantageous for fault-tolerant quantum computation because it reduces the threshold requirements and can achieve larger entanglement rates. Here, we implement deterministic state transfer and entanglement protocols between two superconducting qubits fabricated on separate chips. Superconducting circuits constitute a universal quantum node capable of sending, receiving, storing, and processing quantum information. Our implementation is based on an all-microwave cavity-assisted Raman process which entangles or transfers the qubit state of a transmon-type artificial atom to a time-symmetric itinerant single photon. We transfer qubit states at a rate of $50 \, \rm{kHz}$ using the emitted photons which are absorbed at the receiving node with a probability of $98.1 \pm 0.1 \%$ achieving a transfer process fidelity of $80.02 \pm 0.07 \%$. We also prepare on demand remote entanglement with a fidelity as high as $78.9 \pm 0.1 \%$. Our results are in excellent agreement with numerical simulations based on a master equation description of the system. This deterministic quantum protocol has the potential to be used as a backbone of surface code quantum error correction across different nodes of a cryogenic network to realize large-scale fault-tolerant quantum computation in the circuit quantum electrodynamic architecture. △ Less

Submitted 22 December, 2017; originally announced December 2017.

Comments: 11 pages 8 Figures

Journal ref: Nature 558, 264-267 (2018)

Single-Shot Quantum Non-Demolition Detection of Itinerant Microwave Photons

Authors: Jean-Claude Besse, Simone Gasparinetti, Michele C. Collodo, Theo Walter, Philipp Kurpiers, Marek Pechal, Christopher Eichler, Andreas Wallraff

Abstract: Single-photon detection is an essential component in many experiments in quantum optics, but remains challenging in the microwave domain. We realize a quantum non-demolition detector for propagating microwave photons and characterize its performance using a single-photon source. To this aim we implement a cavity-assisted conditional phase gate between the incoming photon and a superconducting arti… ▽ More Single-photon detection is an essential component in many experiments in quantum optics, but remains challenging in the microwave domain. We realize a quantum non-demolition detector for propagating microwave photons and characterize its performance using a single-photon source. To this aim we implement a cavity-assisted conditional phase gate between the incoming photon and a superconducting artificial atom. By reading out the state of this atom in single shot, we reach an internal photon detection fidelity of 71%, limited by the coherence properties of the qubit. By characterizing the coherence and average number of photons in the field reflected off the detector, we demonstrate its quantum non-demolition nature. We envisage applications in generating heralded remote entanglement between qubits and for realizing logic gates between propagating microwave photons. △ Less

Submitted 30 November, 2017; originally announced November 2017.

Journal ref: Phys. Rev. X 8, 021003 (2018)

All-Microwave Control and Dispersive Readout of Gate-Defined Quantum Dot Qubits in Circuit Quantum Electrodynamics

Authors: P. Scarlino, D. J. van Woerkom, A. Stockklauser, J. V. Koski, M. C. Collodo, S. Gasparinetti, C. Reichl, W. Wegscheider, T. Ihn, K. Ensslin, A. Wallraff

Abstract: Developing fast and accurate control and readout techniques is an important challenge in quantum information processing with semiconductor qubits. Here, we study the dynamics and the coherence properties of a GaAs/AlGaAs double quantum dot (DQD) charge qubit strongly coupled to a high-impedance SQUID array resonator. We drive qubit transitions with synthesized microwave pulses and perform qubit re… ▽ More Developing fast and accurate control and readout techniques is an important challenge in quantum information processing with semiconductor qubits. Here, we study the dynamics and the coherence properties of a GaAs/AlGaAs double quantum dot (DQD) charge qubit strongly coupled to a high-impedance SQUID array resonator. We drive qubit transitions with synthesized microwave pulses and perform qubit readout through the state dependent frequency shift imparted by the qubit on the dispersively coupled resonator. We perform Rabi oscillation, Ramsey fringe, energy relaxation and Hahn-echo measurements and find significantly reduced decoherence rates down to $γ_2/2π\sim 3\,\rm{MHz}$ corresponding to coherence times of up to $T_2 \sim 50 \, \rm{ns}$ for charge states in gate defined quantum dot qubits. △ Less

Submitted 6 November, 2017; originally announced November 2017.

Journal ref: Phys. Rev. Lett. 122, 206802 (2019)

Studying Light-Harvesting Models with Superconducting Circuits

Authors: Anton Potočnik, Arno Bargerbos, Florian A. Y. N. Schröder, Saeed A. Khan, Michele C. Collodo, Simone Gasparinetti, Yves Salathé, Celestino Creatore, Christopher Eichler, Hakan E. Türeci, Alex W. Chin, Andreas Wallraff

Abstract: The process of photosynthesis, the main source of energy in the animate world, converts sunlight into chemical energy. The surprisingly high efficiency of this process is believed to be enabled by an intricate interplay between the quantum nature of molecular structures in photosynthetic complexes and their interaction with the environment. Investigating these effects in biological samples is chal… ▽ More The process of photosynthesis, the main source of energy in the animate world, converts sunlight into chemical energy. The surprisingly high efficiency of this process is believed to be enabled by an intricate interplay between the quantum nature of molecular structures in photosynthetic complexes and their interaction with the environment. Investigating these effects in biological samples is challenging due to their complex and disordered structure. Here we experimentally demonstrate a new approach for studying photosynthetic models based on superconducting quantum circuits. In particular, we demonstrate the unprecedented versatility and control of our method in an engineered three-site model of a pigment protein complex with realistic parameters scaled down in energy by a factor of $10^5$. With this system we show that the excitation transport between quantum coherent sites disordered in energy can be enabled through the interaction with environmental noise. We also show that the efficiency of the process is maximized for structured noise resembling intramolecular phononic environments found in photosynthetic complexes. △ Less

Submitted 20 October, 2017; originally announced October 2017.

Comments: 8+12 pages, 4+12 figures

Journal ref: Nature Communications 9, 904 (2018)

Correlations and entanglement of microwave photons emitted in a cascade decay

Authors: Simone Gasparinetti, Marek Pechal, Jean-Claude Besse, Mintu Mondal, Christopher Eichler, Andreas Wallraff

Abstract: An excited emitter decays by radiating a photon into a quantized mode of the electromagnetic field, a process known as spontaneous emission. If the emitter is driven to a higher excited state, it radiates multiple photons in a cascade decay. Atomic and biexciton cascades have been exploited as sources of polarization-entangled photon pairs. Because the photons are emitted sequentially, their inten… ▽ More An excited emitter decays by radiating a photon into a quantized mode of the electromagnetic field, a process known as spontaneous emission. If the emitter is driven to a higher excited state, it radiates multiple photons in a cascade decay. Atomic and biexciton cascades have been exploited as sources of polarization-entangled photon pairs. Because the photons are emitted sequentially, their intensities are strongly correlated in time, as measured in a double-beam coincidence experiment. Perhaps less intuitively, their phases can also be correlated, provided a single emitter is deterministically prepared into a superposition state, and the emitted radiation is detected in a phase-sensitive manner and with high efficiency. Here we have met these requirements by using a superconducting artificial atom, coherently driven to its second-excited state and decaying into a well-defined microwave mode. Our results highlight the coherent nature of cascade decay and demonstrate a novel protocol to generate entanglement between itinerant field modes. △ Less

Submitted 15 May, 2017; originally announced May 2017.

Journal ref: Phys. Rev. Lett. 119, 140504 (2017)

Realizing Rapid, High-Fidelity, Single-Shot Dispersive Readout of Superconducting Qubits

Authors: T. Walter, P. Kurpiers, S. Gasparinetti, P. Magnard, A. Potocnik, Y. Salathe, M. Pechal, M. Mondal, M. Oppliger, C. Eichler, A. Wallraff

Abstract: The speed of quantum gates and measurements is a decisive factor for the overall fidelity of quantum protocols when performed on physical qubits with finite coherence time. Reducing the time required to distinguish qubit states with high fidelity is therefore a critical goal in quantum information science. The state-of-the-art readout of superconducting qubits is based on the dispersive interactio… ▽ More The speed of quantum gates and measurements is a decisive factor for the overall fidelity of quantum protocols when performed on physical qubits with finite coherence time. Reducing the time required to distinguish qubit states with high fidelity is therefore a critical goal in quantum information science. The state-of-the-art readout of superconducting qubits is based on the dispersive interaction with a readout resonator. Here, we bring this technique to its current limit and demonstrate how the careful design of system parameters leads to fast and high-fidelity measurements without affecting qubit coherence. We achieve this result by increasing the dispersive interaction strength, by choosing an optimal linewidth of the readout resonator, by employing a Purcell filter, and by utilizing phase-sensitive parametric amplification. In our experiment, we measure 98.25% readout fidelity in only 48 ns, when minimizing read-out time, and 99.2% in 88 ns, when maximizing the fidelity, limited predominantly by the qubit lifetime of 7.6 us. The presented scheme is also expected to be suitable for integration into a multiplexed readout architecture. △ Less

Submitted 25 January, 2017; v1 submitted 24 January, 2017; originally announced January 2017.

Comments: 10 pages, 7 figures; fixed pdf compile bug with the e' in Y. Salathe

Journal ref: Phys. Rev. Applied 7, 054020 (2017)

Strong Coupling Cavity QED with Gate-Defined Double Quantum Dots Enabled by a High Impedance Resonator

Authors: Anna Stockklauser, Pasquale Scarlino, Jonne Koski, Simone Gasparinetti, Christian Kraglund Andersen, Christian Reichl, Werner Wegscheider, Thomas Ihn, Klaus Ensslin, Andreas Wallraff

Abstract: The strong coupling limit of cavity quantum electrodynamics (QED) implies the capability of a matter-like quantum system to coherently transform an individual excitation into a single photon within a resonant structure. This not only enables essential processes required for quantum information processing but also allows for fundamental studies of matter-light interaction. In this work we demonstra… ▽ More The strong coupling limit of cavity quantum electrodynamics (QED) implies the capability of a matter-like quantum system to coherently transform an individual excitation into a single photon within a resonant structure. This not only enables essential processes required for quantum information processing but also allows for fundamental studies of matter-light interaction. In this work we demonstrate strong coupling between the charge degree of freedom in a gate-detuned GaAs double quantum dot (DQD) and a frequency-tunable high impedance resonator realized using an array of superconducting quantum interference devices (SQUIDs). In the resonant regime, we resolve the vacuum Rabi mode splitting of size $2g/2π= 238$ MHz at a resonator linewidth $κ/2π= 12$ MHz and a DQD charge qubit dephasing rate of $γ_2/2π= 80$ MHz extracted independently from microwave spectroscopy in the dispersive regime. Our measurements indicate a viable path towards using circuit based cavity QED for quantum information processing in semiconductor nano-structures. △ Less

Submitted 12 January, 2017; originally announced January 2017.

Journal ref: Phys. Rev. X 7, 011030 (2017)

Markovian heat sources with the smallest heat capacity

Authors: Raam Uzdin, Simone Gasparinetti, Roee Ozeri, Ronnie Kosloff

Abstract: Thermal Markovian dynamics is typically obtained by coupling a system to a sufficiently hot bath with a large heat capacity. Here we present a scheme for inducing Markovian dynamics using an arbitrarily small and cold heat bath. The scheme is based on injecting phase noise to the small bath. Several unique signatures of small bath are studied. We discuss realizations in ion traps and superconducti… ▽ More Thermal Markovian dynamics is typically obtained by coupling a system to a sufficiently hot bath with a large heat capacity. Here we present a scheme for inducing Markovian dynamics using an arbitrarily small and cold heat bath. The scheme is based on injecting phase noise to the small bath. Several unique signatures of small bath are studied. We discuss realizations in ion traps and superconducting qubits and show that it is possible to create an ideal setting where the system dynamics is indifferent to the internal bath dynamics. △ Less

Submitted 12 July, 2017; v1 submitted 9 October, 2016; originally announced October 2016.

Comments: V2 contains new contributions by the new authors SG and RO about experimental realization in superconducting circuits and ion traps. In addition, the discussion on system-bath correlation in V2 was extended. The study of generalized Gibbs states was omitted in V2, but can still be found in V1. More generally, V2 is a clearer and more concise version

Journal ref: New J. Phys. 20 063030 (2018)

Observation of topological Uhlmann phases with superconducting qubits

Authors: O. Viyuela, A. Rivas, S. Gasparinetti, A. Wallraff, S. Filipp, M. A. Martin-Delgado

Abstract: Topological insulators and superconductors at finite temperature can be characterized by the topological Uhlmann phase. However, a direct experimental measurement of this invariant has remained elusive in condensed matter systems. Here, we report a measurement of the topological Uhlmann phase for a topological insulator simulated by a system of entangled qubits in the IBM Quantum Experience platfo… ▽ More Topological insulators and superconductors at finite temperature can be characterized by the topological Uhlmann phase. However, a direct experimental measurement of this invariant has remained elusive in condensed matter systems. Here, we report a measurement of the topological Uhlmann phase for a topological insulator simulated by a system of entangled qubits in the IBM Quantum Experience platform. By making use of ancilla states, otherwise unobservable phases carrying topological information about the system become accessible, enabling the experimental determination of a complete phase diagram including environmental effects. We employ a state-independent measurement protocol which does not involve prior knowledge of the system state. The proposed measurement scheme is extensible to interacting particles and topological models with a large number of bands. △ Less

Submitted 12 February, 2018; v1 submitted 29 July, 2016; originally announced July 2016.

Comments: RevTex4 file, color figures

Journal ref: npj Quantum Information 4, 10 (2018)

Probing Quantum Interference Effects in the Work Distribution

Authors: Paolo Solinas, Simone Gasparinetti

Abstract: What is the role of coherence in determining the distribution of work done on a quantum system? We approach this question from an operational perspective and consider a setup in which the internal energy of a closed system is recorded by a quantum detector before and after the system is acted upon by an external drive. We find that the resulting work distribution depends on the initial state of th… ▽ More What is the role of coherence in determining the distribution of work done on a quantum system? We approach this question from an operational perspective and consider a setup in which the internal energy of a closed system is recorded by a quantum detector before and after the system is acted upon by an external drive. We find that the resulting work distribution depends on the initial state of the detector as well as on the choice of the final measurement. We consider two complementary measurement schemes, both of which show clear signatures of quantum interference. We specifically discuss how to implement these schemes in the circuit QED architecture, using an artificial atom as the system and a quantized mode of the electromagnetic field as the detector. Different measurement schemes can be realized by preparing the field either in a superposition of Fock states or in a coherent state and exploiting state-of-the art techniques for the characterization of microwave radiation at the quantum level. More generally, the single bosonic mode we utilize is arguably the minimal quantum detector capable of capturing the complementary aspects of the work distribution discussed here. △ Less

Submitted 28 June, 2016; originally announced June 2016.

Comments: 12 pages, 3 figures

Journal ref: Phys. Rev. A 94, 052103 (2016)

Superconducting switch for fast on-chip routing of quantum microwave fields

Authors: M. Pechal, J. -C. Besse, M. Mondal, M. Oppliger, S. Gasparinetti, A. Wallraff

Abstract: A switch capable of routing microwave signals at cryogenic temperatures is a desirable component for state-of-the-art experiments in many fields of applied physics, including but not limited to quantum information processing, communication and basic research in engineered quantum systems. Conventional mechanical switches provide low insertion loss but disturb operation of dilution cryostats and th… ▽ More A switch capable of routing microwave signals at cryogenic temperatures is a desirable component for state-of-the-art experiments in many fields of applied physics, including but not limited to quantum information processing, communication and basic research in engineered quantum systems. Conventional mechanical switches provide low insertion loss but disturb operation of dilution cryostats and the associated experiments by heat dissipation. Switches based on semiconductors or microelectromechanical systems have a lower thermal budget but are not readily integrated with current superconducting circuits. Here we design and test an on-chip switch built by combining tunable transmission-line resonators with microwave beam-splitters. The device is superconducting and as such dissipates a negligible amount of heat. It is compatible with current superconducting circuit fabrication techniques, operates with a bandwidth exceeding $100\,\mathrm{MHz}$, is capable of handling photon fluxes on the order of $10^{5}\,μ\mathrm{s}^{-1}$, equivalent to powers exceeding $-90\,\mathrm{dBm}$, and can be switched within approximately $6-8\,\mathrm{ns}$. We successfully demonstrate operation of the device in the quantum regime by integrating it on a chip with a single-photon source and using it to route non-classical itinerant microwave fields at the single-photon level. △ Less

Submitted 3 June, 2016; originally announced June 2016.

Journal ref: Phys. Rev. Applied 6, 024009 (2016)

Measurement of a Vacuum-Induced Geometric Phase

Authors: Simone Gasparinetti, Simon Berger, Abdufarrukh A. Abdumalikov, Marek Pechal, Stefan Filipp, Andreas J. Wallraff

Abstract: Berry's geometric phase naturally appears when a quantum system is driven by an external field whose parameters are slowly and cyclically changed. A variation in the coupling between the system and the external field can also give rise to a geometric phase, even when the field is in the vacuum state or any other Fock state. Here we demonstrate the appearance of a vacuum-induced Berry phase in an a… ▽ More Berry's geometric phase naturally appears when a quantum system is driven by an external field whose parameters are slowly and cyclically changed. A variation in the coupling between the system and the external field can also give rise to a geometric phase, even when the field is in the vacuum state or any other Fock state. Here we demonstrate the appearance of a vacuum-induced Berry phase in an artificial atom, a superconducting transmon, interacting with a single mode of a microwave cavity. As we vary the phase of the interaction, the artificial atom acquires a geometric phase determined by the path traced out in the combined Hilbert space of the atom and the quantum field. Our ability to control this phase opens new possibilities for the geometric manipulation of atom-cavity systems also in the context of quantum information processing. △ Less

Submitted 20 May, 2016; originally announced May 2016.

Comments: 5 + 6 pages

Journal ref: Sci. Adv. 2, e1501732 (2016)

Full distribution of work done on a quantum system for arbitrary initial states

Authors: P. Solinas, S. Gasparinetti

Abstract: We propose a novel approach to define and measure the statistics of work, internal energy and dissipated heat in a driven quantum system. In our framework the presence of a physical detector arises naturally and work and its statistics can be investigated in the most general case. In particular, we show that the quantum coherence of the initial state can lead to measurable effects on the moments o… ▽ More We propose a novel approach to define and measure the statistics of work, internal energy and dissipated heat in a driven quantum system. In our framework the presence of a physical detector arises naturally and work and its statistics can be investigated in the most general case. In particular, we show that the quantum coherence of the initial state can lead to measurable effects on the moments of the work done on the system. At the same time, we recover the known results if the initial state is a statistical mixture of energy eigenstates. Our method can also be applied to measure the dissipated heat in an open quantum system. By sequentially coupling the system to a detector, we can track the energy dissipated in the environment while accessing only the system degrees of freedom. △ Less

Submitted 16 August, 2015; v1 submitted 7 April, 2015; originally announced April 2015.

Comments: 8 pages, 2 figures. Title changed

Journal ref: Phys. Rev. E 92, 042150 (2015)

Incomplete measurement of work in a dissipative two level system

Authors: Klaara L. Viisanen, Samu Suomela, Simone Gasparinetti, Olli-Pentti Saira, Joachim Ankerhold, Jukka P. Pekola

Abstract: We discuss work performed on a quantum two-level system coupled to multiple thermal baths. To evaluate the work, a measurement of photon exchange between the system and the baths is envisioned. In a realistic scenario, some photons remain unrecorded as they are exchanged with baths that are not accessible to the measurement, and thus only partial information on work and heat is available. The inco… ▽ More We discuss work performed on a quantum two-level system coupled to multiple thermal baths. To evaluate the work, a measurement of photon exchange between the system and the baths is envisioned. In a realistic scenario, some photons remain unrecorded as they are exchanged with baths that are not accessible to the measurement, and thus only partial information on work and heat is available. The incompleteness of the measurement leads to substantial deviations from standard fluctuation relations. We propose a recovery of these relations, based on including the mutual information given by the counting efficiency of the partial measurement. We further present the experimental status of a possible implementation of the proposed scheme, i.e. a calorimetric measurement of work, currently with nearly single-photon sensitivity. △ Less

Submitted 23 December, 2014; originally announced December 2014.

A Josephson radiation comb generator

Authors: P. Solinas, S. Gasparinetti, D. Golubev, F. Giazotto

Abstract: We propose the implementation of a Josephson Radiation Comb Generator (JRCG) based on a dc superconducting quantum interference device (SQUID) driven by an external magnetic field. When the magnetic flux crosses a diffraction node of the critical current interference pattern, the superconducting phase undergoes a jump of $π$ and a voltage pulse is generated at the extremes of the SQUID. Under peri… ▽ More We propose the implementation of a Josephson Radiation Comb Generator (JRCG) based on a dc superconducting quantum interference device (SQUID) driven by an external magnetic field. When the magnetic flux crosses a diffraction node of the critical current interference pattern, the superconducting phase undergoes a jump of $π$ and a voltage pulse is generated at the extremes of the SQUID. Under periodic drive this allows one to generate a sequence of sharp, evenly spaced voltage pulses. In the frequency domain, this corresponds to a comb-like structure similar to the one exploited in optics and metrology. With this device it is possible to generate up to several hundreds of harmonics of the driving frequency. For example, a chain of $50$ identical high-critical-temperature SQUIDs driven at 1 GHz can deliver up to a $0.5$ nW at 200 GHz. The availability of a fully solid-state radiation comb generator such as the JRCG, easily integrable on chip, may pave the way to a number of technological applications, from metrology to sub-millimeter wave generation. △ Less

Submitted 1 July, 2015; v1 submitted 29 October, 2014; originally announced October 2014.

Comments: 9 pages, 6 color figures

Journal ref: Sci. Rep. 5, 12260 (2015)

Fast electron thermometry towards ultra-sensitive calorimetric detection

Authors: S. Gasparinetti, K. L. Viisanen, O. -P. Saira, T. Faivre, M. Arzeo, M. Meschke, J. P. Pekola

Abstract: We demonstrate radiofrequency thermometry on a micrometer-sized metallic island below 100 mK. Our device is based on a normal metal-insulator-superconductor tunnel junction coupled to a resonator with transmission readout. In the first generation of the device, we achieve 90 μK/Hz^1/2 noise-equivalent temperature with 10 MHz bandwidth. We measure the thermal relaxation time of the electron gas in… ▽ More We demonstrate radiofrequency thermometry on a micrometer-sized metallic island below 100 mK. Our device is based on a normal metal-insulator-superconductor tunnel junction coupled to a resonator with transmission readout. In the first generation of the device, we achieve 90 μK/Hz^1/2 noise-equivalent temperature with 10 MHz bandwidth. We measure the thermal relaxation time of the electron gas in the island, which we find to be of the order of 100 μs. Such a calorimetric detector, upon optimization, can be seamlessly integrated into superconducting circuits, with immediate applications in quantum-thermodynamics experiments down to single quanta of energy. △ Less

Submitted 4 November, 2014; v1 submitted 29 May, 2014; originally announced May 2014.

Comments: 6+4 pages, 4+4 figures

Journal ref: Physical Review Applied 3, 014007 (2015)

Heat-exchange statistics in driven open quantum systems

Authors: S. Gasparinetti, P. Solinas, A. Braggio, M. Sassetti

Abstract: As the dimensions of physical systems approach the nanoscale, the laws of thermodynamics must be reconsidered due to the increased importance of fluctuations and quantum effects. While the statistical mechanics of small classical systems is relatively well understood, the quantum case still poses challenges. Here we set up a formalism that allows to calculate the full probability distribution of e… ▽ More As the dimensions of physical systems approach the nanoscale, the laws of thermodynamics must be reconsidered due to the increased importance of fluctuations and quantum effects. While the statistical mechanics of small classical systems is relatively well understood, the quantum case still poses challenges. Here we set up a formalism that allows to calculate the full probability distribution of energy exchanges between a periodically driven quantum system and a thermalized heat reservoir. The formalism combines Floquet theory with a generalized master equation approach. For a driven two-level system and in the long-time limit, we obtain a universal expression for the distribution, providing clear physical insight into the exchanged energy quanta. We illustrate our approach in two analytically solvable cases and discuss the differences in the corresponding distributions. Our predictions could be directly tested in a variety of systems, including optical cavities and solid-state devices. △ Less

Submitted 29 July, 2014; v1 submitted 14 April, 2014; originally announced April 2014.

Comments: 22 pages, 2 figures

Journal ref: New Journal of Physics 16 (2014) 115001