-
Crystalline superconductor-semiconductor Josephson junctions for compact superconducting qubits
Authors:
Jesse Balgley,
Jinho Park,
Xuanjing Chu,
Ethan G. Arnault,
Martin V. Gustafsson,
Leonardo Ranzani,
Madisen Holbrook,
Kenji Watanabe,
Takashi Taniguchi,
Vasili Perebeinos,
James Hone,
Kin Chung Fong
Abstract:
The narrow bandgap of semiconductors allows for thick, uniform Josephson junction barriers, potentially enabling reproducible, stable, and compact superconducting qubits. We study vertically stacked van der Waals Josephson junctions with semiconducting weak links, whose crystalline structures and clean interfaces offer a promising platform for quantum devices. We observe robust Josephson coupling…
▽ More
The narrow bandgap of semiconductors allows for thick, uniform Josephson junction barriers, potentially enabling reproducible, stable, and compact superconducting qubits. We study vertically stacked van der Waals Josephson junctions with semiconducting weak links, whose crystalline structures and clean interfaces offer a promising platform for quantum devices. We observe robust Josephson coupling across 2--12 nm (3--18 atomic layers) of semiconducting WSe$_2$ and, notably, a crossover from proximity- to tunneling-type behavior with increasing weak link thickness. Building on these results, we fabricate a prototype all-crystalline merged-element transmon qubit with transmon frequency and anharmonicity closely matching design parameters. We demonstrate dispersive coupling between this transmon and a microwave resonator, highlighting the potential of crystalline superconductor-semiconductor structures for compact, tailored superconducting quantum devices.
△ Less
Submitted 24 January, 2025;
originally announced January 2025.
-
Measuring kinetic inductance and superfluid stiffness of two-dimensional superconductors using high-quality transmission-line resonators
Authors:
Mary Kreidel,
Xuanjing Chu,
Jesse Balgley,
Abhinandan Antony,
Nishchhal Verma,
Julian Ingham,
Leonardo Ranzani,
Raquel Queiroz,
Robert M. Westervelt,
James Hone,
Kin Chung Fong
Abstract:
The discovery of van der Waals superconductors in recent years has generated a lot of excitement for their potentially novel pairing mechanisms. However, their typical atomic-scale thickness and micrometer-scale lateral dimensions impose severe challenges to investigations of pairing symmetry by conventional methods. In this report we demonstrate a new technique that employs high-quality-factor su…
▽ More
The discovery of van der Waals superconductors in recent years has generated a lot of excitement for their potentially novel pairing mechanisms. However, their typical atomic-scale thickness and micrometer-scale lateral dimensions impose severe challenges to investigations of pairing symmetry by conventional methods. In this report we demonstrate a new technique that employs high-quality-factor superconducting resonators to measure the kinetic inductance -- up to a part per million -- and loss of a van der Waals superconductor. We analyze the equivalent circuit model to extract the kinetic inductance, superfluid stiffness, penetration depth, and ratio of imaginary and real parts of the complex conductivity. We validate the technique by measuring aluminum and finding excellent agreement in both the zero-temperature superconducting gap as well as the complex conductivity data when compared with BCS theory. We then demonstrate the utility of the technique by measuring the kinetic inductance of multi-layered niobium diselenide and discuss the limits to the accuracy of our technique when the transition temperature of the sample, NbSe$_2$ at 7.06 K, approaches our Nb probe resonator at 8.59 K. Our method will be useful for practitioners in the growing fields of superconducting physics, materials science, and quantum sensing, as a means of characterizing superconducting circuit components and studying pairing mechanisms of the novel superconducting states which arise in layered 2D materials and heterostructures.
△ Less
Submitted 17 October, 2024; v1 submitted 13 July, 2024;
originally announced July 2024.
-
Superfluid stiffness of twisted multilayer graphene superconductors
Authors:
Abhishek Banerjee,
Zeyu Hao,
Mary Kreidel,
Patrick Ledwith,
Isabelle Phinney,
Jeong Min Park,
Andrew M. Zimmerman,
Kenji Watanabe,
Takashi Taniguchi,
Robert M Westervelt,
Pablo Jarillo-Herrero,
Pavel A. Volkov,
Ashvin Vishwanath,
Kin Chung Fong,
Philip Kim
Abstract:
The robustness of the macroscopic quantum nature of a superconductor can be characterized by the superfluid stiffness, $ρ_s$, a quantity that describes the energy required to vary the phase of the macroscopic quantum wave function. In unconventional superconductors, such as cuprates, the low-temperature behavior of $ρ_s$ drastically differs from that of conventional superconductors due to quasipar…
▽ More
The robustness of the macroscopic quantum nature of a superconductor can be characterized by the superfluid stiffness, $ρ_s$, a quantity that describes the energy required to vary the phase of the macroscopic quantum wave function. In unconventional superconductors, such as cuprates, the low-temperature behavior of $ρ_s$ drastically differs from that of conventional superconductors due to quasiparticle excitations from gapless points (nodes) in momentum space. Intensive research on the recently discovered magic-angle twisted graphene family has revealed, in addition to superconducting states, strongly correlated electronic states associated with spontaneously broken symmetries, inviting the study of $ρ_s$ to uncover the potentially unconventional nature of its superconductivity. Here we report the measurement of $ρ_s$ in magic-angle twisted trilayer graphene (TTG), revealing unconventional nodal-gap superconductivity. Utilizing radio-frequency reflectometry techniques to measure the kinetic inductive response of superconducting TTG coupled to a microwave resonator, we find a linear temperature dependence of $ρ_s$ at low temperatures and nonlinear Meissner effects in the current bias dependence, both indicating nodal structures in the superconducting order parameter. Furthermore, the doping dependence shows a linear correlation between the zero temperature $ρ_s$ and the superconducting transition temperature $T_c$, reminiscent of Uemura's relation in cuprates, suggesting phase-coherence-limited superconductivity. Our results provide strong evidence for nodal superconductivity in TTG and put strong constraints on the mechanisms of these graphene-based superconductors.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Graphene amplifier reaches the quantum-noise limit
Authors:
Kin Chung Fong
Abstract:
News & Views on the graphene-based Josephson parametric amplifiers.
News & Views on the graphene-based Josephson parametric amplifiers.
△ Less
Submitted 11 January, 2023;
originally announced January 2023.
-
Wideband Josephson Parametric Amplifier with Integrated Transmission Line Transformer
Authors:
Leonardo Ranzani,
Guilhem Ribeill,
Brian Hassick,
Kin Chung Fong
Abstract:
We describe a wide-band Josephson Parametric Amplifier (JPA) that is impedance-matched using an integrated compact superconducting transmission line transformer. The impedance transformer consists of two broadside coupled transmission lines configured in a Ruthroff topology which enables a wide matching bandwidth from 2 to 18 GHz, reducing the input line impedance and the device resonance quality…
▽ More
We describe a wide-band Josephson Parametric Amplifier (JPA) that is impedance-matched using an integrated compact superconducting transmission line transformer. The impedance transformer consists of two broadside coupled transmission lines configured in a Ruthroff topology which enables a wide matching bandwidth from 2 to 18 GHz, reducing the input line impedance and the device resonance quality factor by a factor of 4. This enables gain flatness and flexibility in the choice of the amplifier's tuning range. The amplifier has up to 20dB gain, with less than 1 dB of ripple, 2-3 GHz gain-bandwidth product and -126 dBm input 1-dB compression point. Moreover, the device active area fits into a 1mm x 1mm space, thus easing integration into large quantum systems.
△ Less
Submitted 19 September, 2022; v1 submitted 3 August, 2022;
originally announced August 2022.
-
Materials and devices for fundamental quantum science and quantum technologies
Authors:
Marco Polini,
Francesco Giazotto,
Kin Chung Fong,
Ioan M. Pop,
Carsten Schuck,
Tommaso Boccali,
Giovanni Signorelli,
Massimo D'Elia,
Robert H. Hadfield,
Vittorio Giovannetti,
Davide Rossini,
Alessandro Tredicucci,
Dmitri K. Efetov,
Frank H. L. Koppens,
Pablo Jarillo-Herrero,
Anna Grassellino,
Dario Pisignano
Abstract:
Technologies operating on the basis of quantum mechanical laws and resources such as phase coherence and entanglement are expected to revolutionize our future. Quantum technologies are often divided into four main pillars: computing, simulation, communication, and sensing & metrology. Moreover, a great deal of interest is currently also nucleating around energy-related quantum technologies. In thi…
▽ More
Technologies operating on the basis of quantum mechanical laws and resources such as phase coherence and entanglement are expected to revolutionize our future. Quantum technologies are often divided into four main pillars: computing, simulation, communication, and sensing & metrology. Moreover, a great deal of interest is currently also nucleating around energy-related quantum technologies. In this Perspective, we focus on advanced superconducting materials, van der Waals materials, and moiré quantum matter, summarizing recent exciting developments and highlighting a wealth of potential applications, ranging from high-energy experimental and theoretical physics to quantum materials science and energy storage.
△ Less
Submitted 23 January, 2022;
originally announced January 2022.
-
Revealing the ultra-sensitive calorimetric properties of supercon-ducting magic-angle twisted bilayer graphene
Authors:
G. Di Battista,
P. Seifert,
K. Watanabe,
T. Taniguchi,
K. C. Fong,
A. Principi,
D. K. Efetov
Abstract:
The allegedly unconventional superconducting phase of magic-angle twisted bilayer graphene (MATBG)1 has been predicted to possess extraordinary thermal properties, as it is formed from a highly diluted electron ensemble with both a record-low carrier density n ~ 10^11 cm-2 and electronic heat capacity Ce < 100 kB. While these attributes position MATBG as a ground-breaking material platform for rev…
▽ More
The allegedly unconventional superconducting phase of magic-angle twisted bilayer graphene (MATBG)1 has been predicted to possess extraordinary thermal properties, as it is formed from a highly diluted electron ensemble with both a record-low carrier density n ~ 10^11 cm-2 and electronic heat capacity Ce < 100 kB. While these attributes position MATBG as a ground-breaking material platform for revolutionary calorimetric applications2, these properties have so far not been experimentally shown. Here we reveal the ultra-sensitive calorimetric properties of a superconducting MATBG device, by monitoring its temperature dependent critical current Ic under continuous laser heating with a wavelength of 1550nm. From the bolometric effect, we are able to extract the temperature dependence of the electronic thermal conductance Gth, which remarkably has a non-zero value Gth = 0.19 pW/K at 35mK and in the low temperature limit is consistent with a power law dependence, as expected for nodal superconductors. Photo-voltage measurements on this non-optimized device reveal a peak responsivity of S = 5.8 x 10^7 V/W when the device is biased close to Ic, with a noise-equivalent power of NEP = 5.5 x 10^-16 WHz^-1/2. Analysis of the intrinsic perfor-mance shows that a theoretically achievable limit is defined by thermal fluctuations and can be as low as NEPTEF < 10^-20 WHz-1/2, with operation speeds as fast as ~ 500 ns. This establishes superconducting MATBG as a revolutionizing active material for ultra-sensitive photon-detection applications, which could enable currently unavailable technologies such as THz photon-number-resolving single-photon-detectors.
△ Less
Submitted 16 November, 2021;
originally announced November 2021.
-
Miniaturizing transmon qubits using van der Waals materials
Authors:
Abhinandan Antony,
Martin V. Gustafsson,
Guilhem J. Ribeill,
Matthew Ware,
Anjaly Rajendran,
Luke C. G. Govia,
Thomas A. Ohki,
Takashi Taniguchi,
Kenji Watanabe,
James Hone,
Kin Chung Fong
Abstract:
Quantum computers can potentially achieve an exponential speedup versus classical computers on certain computational tasks, as recently demonstrated in systems of superconducting qubits. However, these qubits have large footprints due to their large capacitor electrodes needed to suppress losses by avoiding dielectric materials. This tactic hinders scaling by increasing parasitic coupling among ci…
▽ More
Quantum computers can potentially achieve an exponential speedup versus classical computers on certain computational tasks, as recently demonstrated in systems of superconducting qubits. However, these qubits have large footprints due to their large capacitor electrodes needed to suppress losses by avoiding dielectric materials. This tactic hinders scaling by increasing parasitic coupling among circuit components, degrading individual qubit addressability, and limiting the spatial density of qubits. Here, we take advantage of the unique properties of the van der Waals (vdW) materials to reduce the qubit area by a factor of $>1000$ while preserving the required capacitance without increasing substantial loss. Our qubits combine conventional aluminum-based Josephson junctions with parallel-plate capacitors composed of crystalline layers of superconducting niobium diselenide (NbSe$_2$) and insulating hexagonal-boron nitride (hBN). We measure a vdW transmon $T_1$ relaxation time of 1.06 $μ$s, which demonstrates a path to achieve high-qubit-density quantum processors with long coherence times, and illustrates the broad utility of layered heterostructures in low-loss, high-coherence quantum devices.
△ Less
Submitted 13 May, 2022; v1 submitted 6 September, 2021;
originally announced September 2021.
-
Josephson-junction infrared single-photon detector
Authors:
Evan D. Walsh,
Woochan Jung,
Gil-Ho Lee,
Dmitri K. Efetov,
Bae-Ian Wu,
K. -F. Huang,
Thomas A. Ohki,
Takashi Taniguchi,
Kenji Watanabe,
Philip Kim,
Dirk Englund,
Kin Chung Fong
Abstract:
Josephson junctions (JJs) are ubiquitous superconducting devices, enabling high sensitivity magnetometers and voltage amplifiers, as well as forming the basis of high performance cryogenic computer and superconducting quantum computers. While JJ performance can be degraded by quasiparticles (QPs) formed from broken Cooper pairs, this phenomenon also opens opportunities to sensitively detect electr…
▽ More
Josephson junctions (JJs) are ubiquitous superconducting devices, enabling high sensitivity magnetometers and voltage amplifiers, as well as forming the basis of high performance cryogenic computer and superconducting quantum computers. While JJ performance can be degraded by quasiparticles (QPs) formed from broken Cooper pairs, this phenomenon also opens opportunities to sensitively detect electromagnetic radiation. Here we demonstrate single near-infrared photon detection by coupling photons to the localized surface plasmons of a graphene-based JJ. Using the photon-induced switching statistics of the current-biased JJ, we reveal the critical role of QPs generated by the absorbed photon in the detection mechanism. The photon-sensitive JJ will enable a high-speed, low-power optical interconnect for future JJ-based computing architectures.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
Magic-angle bilayer graphene nano-calorimeters -- towards broadband, energy-resolving single photon detection
Authors:
P. Seifert,
X. Lu,
P. Stepanov,
J. R. Duran,
J. N. Moore,
K. C. Fong,
A. Principi,
D. K. Efetov
Abstract:
Because of the ultra-low photon energies in the mid-infrared and terahertz frequencies, in these bands photodetectors are notoriously underdeveloped, and broadband single photon detectors (SPDs) are non-existent. Advanced SPDs exploit thermal effects in nano-structured superconductors, and their performance is currently limited to the more energetic near-infrared photons due to their high electron…
▽ More
Because of the ultra-low photon energies in the mid-infrared and terahertz frequencies, in these bands photodetectors are notoriously underdeveloped, and broadband single photon detectors (SPDs) are non-existent. Advanced SPDs exploit thermal effects in nano-structured superconductors, and their performance is currently limited to the more energetic near-infrared photons due to their high electronic heat capacity. Here, we demonstrate a superconducting magic-angle twisted bilayer graphene (MAG) device that is capable of detecting single photons of ultra-low energies by utilizing its record-low heat capacity and sharp superconducting transition. We theoretically quantify its calorimetric photoresponse and estimate its detection limits. This device allows the detection of ultra-broad range single photons from the visible to sub-THz with response time around 4 ns and energy resolution better than 1 THz. These attributes position MAG as an excep-tional material for long-wavelength single photon sensing, which could revolutionize such disparate fields as quantum information processing and radio astronomy.
△ Less
Submitted 11 November, 2019;
originally announced November 2019.
-
Graphene-based Josephson junction microwave bolometer
Authors:
Gil-Ho Lee,
Dmitri K. Efetov,
Woochan Jung,
Leonardo Ranzani,
Evan D. Walsh,
Thomas A. Ohki,
Takashi Taniguchi,
Kenji Watanabe,
Philip Kim,
Dirk Englund,
Kin Chung Fong
Abstract:
Sensitive microwave detectors are critical instruments in radioastronomy, dark matter axion searches, and superconducting quantum information science. The conventional strategy towards higher-sensitivity bolometry is to nanofabricate an ever-smaller device to augment the thermal response. However, this direction is increasingly more difficult to obtain efficient photon coupling and maintain the ma…
▽ More
Sensitive microwave detectors are critical instruments in radioastronomy, dark matter axion searches, and superconducting quantum information science. The conventional strategy towards higher-sensitivity bolometry is to nanofabricate an ever-smaller device to augment the thermal response. However, this direction is increasingly more difficult to obtain efficient photon coupling and maintain the material properties in a device with a large surface-to-volume ratio. Here we advance this concept to an ultimately thin bolometric sensor based on monolayer graphene. To utilize its minute electronic specific heat and thermal conductivity, we develop a superconductor-graphene-superconductor (SGS) Josephson junction bolometer embedded in a microwave resonator of resonant frequency 7.9 GHz with over 99\% coupling efficiency. From the dependence of the Josephson switching current on the operating temperature, charge density, input power, and frequency, we demonstrate a noise equivalent power (NEP) of 7 $\times 10^{-19}$ W/Hz$^{1/2}$, corresponding to an energy resolution of one single photon at 32 GHz and reaching the fundamental limit imposed by intrinsic thermal fluctuation at 0.19 K.
△ Less
Submitted 4 November, 2020; v1 submitted 11 September, 2019;
originally announced September 2019.
-
Kinetic Inductance Traveling Wave Amplifiers For Multiplexed Qubit Readout
Authors:
Leonardo Ranzani,
Mustafa Bal,
Kin Chung Fong,
Guilhem Ribeill,
Xian Wu,
Junling Long,
Hsiang Sheng Ku,
Robert P. Erickson,
David Pappas,
Thomas A. Ohki
Abstract:
We describe a kinetic inductance traveling-wave (KIT) amplifier suitable for superconducting quantum information measurements and characterize its wideband scattering and noise properties. We use mechanical microwave switches to calibrate the four amplifier scattering parameters up to the device input and output connectors at the dilution refrigerator base temperature and a tunable temperature loa…
▽ More
We describe a kinetic inductance traveling-wave (KIT) amplifier suitable for superconducting quantum information measurements and characterize its wideband scattering and noise properties. We use mechanical microwave switches to calibrate the four amplifier scattering parameters up to the device input and output connectors at the dilution refrigerator base temperature and a tunable temperature load to characterize the amplifier noise. Finally, we demonstrate the high fidelity simultaneous dispersive readout of two superconducting transmon qubits. The KIT amplifier provides low-noise amplification of both readout tones with readout fidelities of 83% and 89% and negligible effect on qubit lifetime and coherence.
△ Less
Submitted 27 November, 2018; v1 submitted 28 September, 2018;
originally announced September 2018.
