-
Casimir-Polder repulsion: Three-body effects
Authors:
Kimball A. Milton,
E. K. Abalo,
Prachi Parashar,
Nima Pourtolami,
Iver Brevik,
Simen A. Ellingsen,
Stefan Yoshi Buhmann,
Stefan Scheel
Abstract:
In this paper we study an archetypical scenario in which repulsive Casimir-Polder forces between an atom or molecule and two macroscopic bodies can be achieved. This is an extension of previous studies of the interaction between a polarizable atom and a wedge, in which repulsion occurs if the atom is sufficiently anisotropic and close enough to the symmetry plane of the wedge. A similar repulsion…
▽ More
In this paper we study an archetypical scenario in which repulsive Casimir-Polder forces between an atom or molecule and two macroscopic bodies can be achieved. This is an extension of previous studies of the interaction between a polarizable atom and a wedge, in which repulsion occurs if the atom is sufficiently anisotropic and close enough to the symmetry plane of the wedge. A similar repulsion occurs if such an atom passes a thin cylinder or a wire. An obvious extension is to compute the interaction between such an atom and two facing wedges, which includes as a special case the interaction of an atom with a conducting screen possessing a slit, or between two parallel wires. To this end we further extend the electromagnetic multiple-scattering formalism for three-body interactions. To test this machinery we reinvestigate the interaction of a polarizable atom between two parallel conducting plates. In that case, three-body effects are shown to be small, and are dominated by three- and four-scattering terms. The atom-wedge calculation is illustrated by an analogous scalar situation, described in the Appendix. The wedge-wedge-atom geometry is difficult to analyze because this is a scale-free problem. But it is not so hard to investigate the three-body corrections to the interaction between an anisotropic atom or nanoparticle and a pair of parallel conducting cylinders, and show that the three-body effects are very small and do not affect the Casimir-Polder repulsion at large distances between the cylinders. Finally, we consider whether such highly anisotropic atoms needed for repulsion are practically realizable. Since this appears rather difficult to accomplish, it may be more feasible to observe such effects with highly anisotropic nano particles.
△ Less
Submitted 21 February, 2015;
originally announced February 2015.
-
Sign of the Casimir-Polder interaction between atoms and oil-water interfaces: Subtle dependence on dielectric properties
Authors:
Mathias Boström,
Simen Å. Ellingsen,
Iver Brevik,
Drew F. Parsons,
Bo E. Sernelius
Abstract:
We demonstrate that Casimir-Polder energies between noble gas atoms (dissolved in water) and oil-water interfaces are highly surface specific. Both repulsion (e.g. hexane) and attraction (e.g. glycerine and cyclodecane) is found with different oils. For several intermediate oils (e.g. hexadecane, decane, and cyclohexane) both attraction and repulsion can be found in the same system. Near these oil…
▽ More
We demonstrate that Casimir-Polder energies between noble gas atoms (dissolved in water) and oil-water interfaces are highly surface specific. Both repulsion (e.g. hexane) and attraction (e.g. glycerine and cyclodecane) is found with different oils. For several intermediate oils (e.g. hexadecane, decane, and cyclohexane) both attraction and repulsion can be found in the same system. Near these oil-water interfaces the interaction is repulsive in the non-retarded limit and turns attractive at larger distances as retardation becomes important. These highly surface specific interactions may have a role to play in biological systems where the surface may be more or less accessible to dissolved atoms.
△ Less
Submitted 7 June, 2012; v1 submitted 31 May, 2012;
originally announced May 2012.
-
Thermal Issues in Casimir Forces Between Conductors and Semiconductors
Authors:
K. A. Milton,
Iver Brevik,
Simen A. Ellingsen
Abstract:
The Casimir effect between metal surfaces has now been well-verified at the few-percent level experimentally. However, the temperature dependence has never been observed in the laboratory, since all experiments are conducted at room temperature. The temperature dependence for the related Casimir-Polder force between an atom and a bulk material has, in contrast, been observed between a BEC and a si…
▽ More
The Casimir effect between metal surfaces has now been well-verified at the few-percent level experimentally. However, the temperature dependence has never been observed in the laboratory, since all experiments are conducted at room temperature. The temperature dependence for the related Casimir-Polder force between an atom and a bulk material has, in contrast, been observed between a BEC and a silica substrate, with the environment and the silica held at different temperatures. There is a controversy about the temperature dependence for the force between metals, having to do with the magnitude of the linear temperature term for both low and high temperature, the latter being most prominent at large distances. There are also related anomalies pertaining to semiconductors. The status of this controversy, and of the relevant experiments, are reviewed in this report.
△ Less
Submitted 20 July, 2012; v1 submitted 22 May, 2012;
originally announced May 2012.
-
Repulsive Casimir and Casimir-Polder Forces
Authors:
Kimball A. Milton,
E. K. Abalo,
Prachi Parashar,
Nima Pourtolami,
Iver Brevik,
Simen A. Ellingsen
Abstract:
Casimir and Casimir-Polder repulsion have been known for more than 50 years. The general "Lifshitz" configuration of parallel semi-infinite dielectric slabs permits repulsion if they are separated by a dielectric fluid that has a value of permittivity that is intermediate between those of the dielectric slabs. This was indirectly confirmed in the 1970s, and more directly by Capasso's group recentl…
▽ More
Casimir and Casimir-Polder repulsion have been known for more than 50 years. The general "Lifshitz" configuration of parallel semi-infinite dielectric slabs permits repulsion if they are separated by a dielectric fluid that has a value of permittivity that is intermediate between those of the dielectric slabs. This was indirectly confirmed in the 1970s, and more directly by Capasso's group recently. It has also been known for many years that electrically and magnetically polarizable bodies can experience a repulsive quantum vacuum force. More amenable to practical application are situations where repulsion could be achieved between ordinary conducting and dielectric bodies in vacuum. The status of the field of Casimir repulsion with emphasis on recent developments will be surveyed. Here, stress will be placed on analytic developments, especially of Casimir-Polder (CP) interactions between anisotropically polarizable atoms, and CP interactions between anisotropic atoms and bodies that also exhibit anisotropy, either because of anisotropic constituents, or because of geometry. Repulsion occurs for wedge-shaped and cylindrical conductors, provided the geometry is sufficiently asymmetric, that is, either the wedge is sufficiently sharp or the atom is sufficiently far from the cylinder.
△ Less
Submitted 25 April, 2012; v1 submitted 28 February, 2012;
originally announced February 2012.
-
Casimir-Polder interaction of fullerene molecules with surfaces
Authors:
Stefan Yoshi Buhmann,
Stefan Scheel,
Simen Å. Ellingsen,
Klaus Hornberger,
Andreas Jacob
Abstract:
We calculate the thermal Casimir--Polder potential of C60 and C70 fullerene molecules near gold and silicon nitride surfaces, motivated by their relevance for molecular matter wave interference experiments. We obtain the coefficients governing the asymptotic power laws of the interaction in the thermal, retarded and nonretarded distance regimes and evaluate the full potential numerically. The inte…
▽ More
We calculate the thermal Casimir--Polder potential of C60 and C70 fullerene molecules near gold and silicon nitride surfaces, motivated by their relevance for molecular matter wave interference experiments. We obtain the coefficients governing the asymptotic power laws of the interaction in the thermal, retarded and nonretarded distance regimes and evaluate the full potential numerically. The interaction is found to be dominated by electronic transitions, and hence independent of the internal temperature of the molecules. The contributions from phonon transitions, which are affected by the molecular temperature, give rise to only a small correction. Moreover, we find that the sizeable molecular line widths of thermal fullerenes may modify the nonretarded interaction, depending on the model used. Detailed measurements of the nonretarded potential of fullerene thus allow one to distinguish between different theories of incorporating damping.
△ Less
Submitted 9 February, 2012;
originally announced February 2012.
-
Repulsive Casimir Effects
Authors:
K. A. Milton,
E. K. Abalo,
Prachi Parashar,
Nima Pourtolami,
Iver Brevik,
S. A. Ellingsen
Abstract:
Like Casimir's original force between conducting plates in vacuum, Casimir forces are usually attractive. But repulsive Casimir forces can be achieved in special circumstances. These might prove useful in nanotechnology. We give examples of when repulsive quantum vacuum forces can arise with conducting materials.
Like Casimir's original force between conducting plates in vacuum, Casimir forces are usually attractive. But repulsive Casimir forces can be achieved in special circumstances. These might prove useful in nanotechnology. We give examples of when repulsive quantum vacuum forces can arise with conducting materials.
△ Less
Submitted 22 November, 2011;
originally announced November 2011.
-
Casimir-Polder energy level shifts of an out-of-equilibrium particle near a microsphere
Authors:
Simen Å. Ellingsen,
Stefan Yoshi Buhmann,
Stefan Scheel
Abstract:
Rydberg atoms and beams of ultracold polar molecules have become highly useful experimental tools in recent years. There is therefore a need for accessible calculations of interaction potentials between such particles and nearby surfaces and structures, bearing in mind that the particles are far out of thermal equilibrium with their environment and that their interaction is predominantly non-retar…
▽ More
Rydberg atoms and beams of ultracold polar molecules have become highly useful experimental tools in recent years. There is therefore a need for accessible calculations of interaction potentials between such particles and nearby surfaces and structures, bearing in mind that the particles are far out of thermal equilibrium with their environment and that their interaction is predominantly non-retarded. Based on a new perturbative expansion with respect to the inverse speed of light and the inverse conductivity, we derive a simple, closed-form expression for the interaction potential (i.e., the particle energy level shifts) of a particle and a metallic sphere that is is accurate at better than 1% level for typical experimental set-ups at room temperature and above, and off by no more than a few percent at any temperature including zero. Our result illuminates the influence of retardation and imperfect conductivity and the interplay of these effects with geometry. The method developed for the present study may be applied to other, more complex geometries.
△ Less
Submitted 20 January, 2012; v1 submitted 12 July, 2011;
originally announced July 2011.
-
Temperature-independent Casimir-Polder forces in arbitrary geometries
Authors:
Simen Å. Ellingsen,
Stefan Yoshi Buhmann,
Stefan Scheel
Abstract:
We show that the Casimir-Polder potential of a particle in an energy eigenstate at nonretarded distance from a well-conducting body of arbitrary shape is independent of the environment temperature. This is true even when the thermal photon numbers at the relevant atomic transition energies are large. A compact expression is obtained for the temperature-independent potential, which can greatly simp…
▽ More
We show that the Casimir-Polder potential of a particle in an energy eigenstate at nonretarded distance from a well-conducting body of arbitrary shape is independent of the environment temperature. This is true even when the thermal photon numbers at the relevant atomic transition energies are large. A compact expression is obtained for the temperature-independent potential, which can greatly simplify calculations in nontrivial geometries for experimentally relevant systems such as Rydberg atoms and polar molecules. We give criteria for the validity of our temperature-independent result. They are illustrated by numerical studies of a particle near a gold sphere or inside a gold cylindrical cavity.
△ Less
Submitted 24 June, 2011;
originally announced June 2011.
-
Casimir-Polder repulsion near edges: wedge apex and a screen with an aperture
Authors:
Kimball A. Milton,
E. K. Abalo,
Prachi Parashar,
Nima Pourtolami,
Iver Brevik,
Simen A. Ellingsen
Abstract:
Although repulsive effects have been predicted for quantum vacuum forces between bodies with nontrivial electromagnetic properties, such as between a perfect electric conductor and a perfect magnetic conductor, realistic repulsion seems difficult to achieve. Repulsion is possible if the medium between the bodies has a permittivity in value intermediate to those of the two bodies, but this may not…
▽ More
Although repulsive effects have been predicted for quantum vacuum forces between bodies with nontrivial electromagnetic properties, such as between a perfect electric conductor and a perfect magnetic conductor, realistic repulsion seems difficult to achieve. Repulsion is possible if the medium between the bodies has a permittivity in value intermediate to those of the two bodies, but this may not be a useful configuration. Here, inspired by recent numerical work, we initiate analytic calculations of the Casimir-Polder interaction between an atom with anisotropic polarizability and a plate with an aperture. In particular, for a semi-infinite plate, and, more generally, for a wedge, the problem is exactly solvable, and for sufficiently large anisotropy, Casimir-Polder repulsion is indeed possible, in agreement with the previous numerical studies. In order to achieve repulsion, what is needed is a sufficiently sharp edge (not so very sharp, in fact) so that the directions of polarizability of the conductor and the atom are roughly normal to each other. The machinery for carrying out the calculation with a finite aperture is presented. As a motivation for the quantum calculation, we carry out the corresponding classical analysis for the force between a dipole and a metallic sheet with a circular aperture, when the dipole is on the symmetry axis and oriented in the same direction.
△ Less
Submitted 9 May, 2011; v1 submitted 22 March, 2011;
originally announced March 2011.
-
Electromagnetic Momentum Conservation in media
Authors:
Iver Brevik,
Simen Å. Ellingsen
Abstract:
That static electric and magnetic fields can store momentum may be perplexing, but is necessary to ensure total conservation of momentum. Simple situations in which such field momentum is transferred to nearby bodies and point charges have often been considered for pedagogical purposes, normally assuming vacuum surroundings. If dielectric media are involved, however, the analysis becomes more deli…
▽ More
That static electric and magnetic fields can store momentum may be perplexing, but is necessary to ensure total conservation of momentum. Simple situations in which such field momentum is transferred to nearby bodies and point charges have often been considered for pedagogical purposes, normally assuming vacuum surroundings. If dielectric media are involved, however, the analysis becomes more delicate, not least since one encounters the electromagnetic energy-momentum problem in matter, the `Abraham-Minkowski enigma', of what the momentum is of a photon in matter. We analyze the momentum balance in three nontrivial examples obeying azimuthal symmetry, showing how the momentum conservation is satisfied as the magnetic field decays and momentum is transferred to bodies present. In the last of the examples, that of point charge outside a dielectric sphere in an infinite magnetic field, we find that not all of the field momentum is transferred to the nearby bodies; a part of the momentum appears to vanish as momentum flux towards infinity. We discuss this and other surprising observations which can be attributed to the assumption of magnetic fields of infinite extent. We emphasize how formal arguments of conserved quantities cannot determine which energy-momentum tensor is more "correct", and each of our conservation checks may be performed equally well in the Minkowski or Abraham framework.
△ Less
Submitted 26 July, 2010;
originally announced July 2010.
-
Multiple Scattering: Dispersion, Temperature Dependence, and Annular Pistons
Authors:
Kimball A. Milton,
Jef Wagner,
Prachi Parashar,
Ines Cavero-Pelaez,
Iver Brevik,
Simen A. Ellingsen
Abstract:
We review various applications of the multiple scattering approach to the calculation of Casimir forces between separate bodies, including dispersion, wedge geometries, annular pistons, and temperature dependence. Exact results are obtained in many cases.
We review various applications of the multiple scattering approach to the calculation of Casimir forces between separate bodies, including dispersion, wedge geometries, annular pistons, and temperature dependence. Exact results are obtained in many cases.
△ Less
Submitted 20 July, 2010;
originally announced July 2010.
-
Casimir-Polder potential and transition rate in resonating cylindrical cavities
Authors:
Simen Å. Ellingsen,
Stefan Yoshi Buhmann,
Stefan Scheel
Abstract:
We consider the Casimir-Polder potential of particles placed inside a metallic cylindrical cavity at finite temperatures, taking account of thermal non-equilibrium effects. In particular, we study how the resonant (thermal non-equilibrium) potential and transition rates can be enhanced by fine-tuning the radius of the cavity to match the transition wavelength of the dominant transition of the part…
▽ More
We consider the Casimir-Polder potential of particles placed inside a metallic cylindrical cavity at finite temperatures, taking account of thermal non-equilibrium effects. In particular, we study how the resonant (thermal non-equilibrium) potential and transition rates can be enhanced by fine-tuning the radius of the cavity to match the transition wavelength of the dominant transition of the particle. Numerical calculations show that the CP potential acting atoms prepared in low-lying Rydberg states can be enhanced beyond 30 kHz, which is within the range of observability of modern experiments. Because the magnitude of the resonance peaks depend sensitively on the low frequency dissipation of the cavity metal, experiments in this set-up could be a critical test of the disputed thermal correction to the Casimir force between metal plates.
△ Less
Submitted 7 July, 2010;
originally announced July 2010.
-
Thermal Casimir-Polder shifts in Rydberg atoms near metallic surfaces
Authors:
J. A. Crosse,
Simen Å. Ellingsen,
Kate Clements,
Stefan Y. Buhmann,
Stefan Scheel
Abstract:
The Casimir-Polder (CP) potential and transition rates of a Rydberg atom above a plane metal surface at finite temperature are discussed. As an example, the CP potential and transition rates of a rubidium atom above a copper surface at room temperature is computed. Close to the surface we show that the quadrupole correction to the force is significant and increases with increasing principal quantu…
▽ More
The Casimir-Polder (CP) potential and transition rates of a Rydberg atom above a plane metal surface at finite temperature are discussed. As an example, the CP potential and transition rates of a rubidium atom above a copper surface at room temperature is computed. Close to the surface we show that the quadrupole correction to the force is significant and increases with increasing principal quantum number n. For both the CP potential and decay rates one finds that the dominant contribution comes from the longest wavelength transition and the potential is independent of temperature. We provide explicit scaling laws for potential and decay rates as functions of atom-surface distance and principal quantum number of the initial Rydberg state.
△ Less
Submitted 21 July, 2010; v1 submitted 14 May, 2010;
originally announced May 2010.
-
Casimir-Foucault interaction: Free energy and entropy at low temperature
Authors:
F. Intravaia,
Simen Å. Ellingsen,
C. Henkel
Abstract:
It was recently found that thermodynamic anomalies which arise in the Casimir effect between metals described by the Drude model can be attributed to the interaction of fluctuating Foucault (or eddy) currents [Phys. Rev. Lett. 103, 130405 (2009)]. We show explicitly that the two leading terms of the low-temperature correction to the Casimir free energy of interaction between two plates, are identi…
▽ More
It was recently found that thermodynamic anomalies which arise in the Casimir effect between metals described by the Drude model can be attributed to the interaction of fluctuating Foucault (or eddy) currents [Phys. Rev. Lett. 103, 130405 (2009)]. We show explicitly that the two leading terms of the low-temperature correction to the Casimir free energy of interaction between two plates, are identical to those pertaining to the Foucault current interaction alone, up to a correction which is very small for good metals. Moreover, a mode density along real frequencies is introduced, showing that the Casimir free energy, as given by the Lifshitz theory, separates in a natural manner in contributions from eddy currents and propagating cavity modes, respectively. The latter have long been known to be of little importance to the low-temperature Casimir anomalies. This convincingly demonstrates that eddy current modes are responsible for the large temperature correction to the Casimir effect between Drude metals, predicted by the Lifshitz theory, but not observed in experiments.
△ Less
Submitted 10 May, 2010;
originally announced May 2010.
-
On the Possibility of Measuring the Abraham Force using Whispering Gallery Modes
Authors:
I. Brevik,
S. Å. Ellingsen
Abstract:
Critical experimental tests of the time-dependent Abraham force in phenomenological electrodynamics are scarce. In this paper we analyze the possibility of making use of intensity-modulated whispering gallery modes in a microresonator for this purpose. Systems of this kind appear attractive, as the strong concentration of electromagnetic fields near the rim of the resonator serves to enhance the A…
▽ More
Critical experimental tests of the time-dependent Abraham force in phenomenological electrodynamics are scarce. In this paper we analyze the possibility of making use of intensity-modulated whispering gallery modes in a microresonator for this purpose. Systems of this kind appear attractive, as the strong concentration of electromagnetic fields near the rim of the resonator serves to enhance the Abraham torque exerted by the field. We analyze mainly spherical resonators, although as an introductory step we consider also the cylinder geometry. The order of magnitude of the Abraham torques are estimated by inserting reasonable values for the various input parameters. As expected, the predicted torques turn out to be very small, although probably not beyond any reach experimentally. Our main idea is essentially a generalization of the method used by G. B. Walker et al. [Can. J. Phys. 53, 2577] for low-frequency fields, to the optical case.
△ Less
Submitted 19 May, 2010; v1 submitted 25 March, 2010;
originally announced March 2010.
-
Temperature-invariant Casimir-Polder forces despite large thermal photon numbers
Authors:
Simen A. Ellingsen,
Stefan Yoshi Buhmann,
Stefan Scheel
Abstract:
We demonstrate that Casimir-Polder potentials can be entirely independent of temperature even when allowing for the thermal photon numbers to become large at the relevant molecular transition frequencies. This statement holds for potentials that are due to low-energy transitions of a molecule placed near a plane metal surface. For a molecule in an energy eigenstate, the temperature-invariance is…
▽ More
We demonstrate that Casimir-Polder potentials can be entirely independent of temperature even when allowing for the thermal photon numbers to become large at the relevant molecular transition frequencies. This statement holds for potentials that are due to low-energy transitions of a molecule placed near a plane metal surface. For a molecule in an energy eigenstate, the temperature-invariance is a consequence of strong cancellations between nonresonant potential components and those due to evanescent waves. For a molecule with a single dominant transition in a thermal state, upward and downward transitions combine to a temperature-independent potential. The results are contrasted with the case of an atom whose potential exhibits a regime of linear temperature-dependence. Contact to the Casimir force between a weakly dielectric and a metal plate is made.
△ Less
Submitted 5 March, 2010;
originally announced March 2010.
-
Casimir effect at nonzero temperature for wedges and cylinders
Authors:
Simen Å. Ellingsen,
Iver Brevik,
Kimball A. Milton
Abstract:
We consider the Casimir-Helmholtz free energy at nonzero temperature $T$ for a circular cylinder and perfectly conducting wedge closed by a cylindrical arc, either perfectly conducting or isorefractive. The energy expression at nonzero temperature may be regularized to obtain a finite value, except for a singular corner term in the case of the wedge which is present also at zero temperature. Ass…
▽ More
We consider the Casimir-Helmholtz free energy at nonzero temperature $T$ for a circular cylinder and perfectly conducting wedge closed by a cylindrical arc, either perfectly conducting or isorefractive. The energy expression at nonzero temperature may be regularized to obtain a finite value, except for a singular corner term in the case of the wedge which is present also at zero temperature. Assuming the medium in the interior of the cylinder or wedge be nondispersive with refractive index $n$, the temperature dependence enters only through the non-dimensional parameter $2πnaT$, $a$ being the radius of the cylinder or cylindrical arc. We show explicitly that the known zero temperature result is regained in the limit $aT\to 0$ and that previously derived high temperature asymptotics for the cylindrical shell are reproduced exactly.
△ Less
Submitted 15 January, 2010;
originally announced January 2010.
-
Transverse radiation force in a tailored optical fiber
Authors:
Iver Brevik,
Simen Å. Ellingsen
Abstract:
We show, by means of simple model calculations, how a weak laser beam sent through an optical fiber exerts a transverse radiation force if there is an azimuthal asymmetry present in the fiber such that one side has a slightly different refractive index than the other. The refractive index difference $Δn$ needs only to be very small, of order $10^{-3}$, in order to produce an appreciable transver…
▽ More
We show, by means of simple model calculations, how a weak laser beam sent through an optical fiber exerts a transverse radiation force if there is an azimuthal asymmetry present in the fiber such that one side has a slightly different refractive index than the other. The refractive index difference $Δn$ needs only to be very small, of order $10^{-3}$, in order to produce an appreciable transverse displacement of order 10 microns. We argue that the effect has probably already been seen in a recent experiment of She et al. [Phys. Rev. Lett. 101, 243601 (2008)], and we discuss correspondence between these observations and the theory presented. The effect could be used to bend optical fibers in a predictable and controlled manner and we propose that it could be useful for micron-scale devices.
△ Less
Submitted 11 December, 2009;
originally announced December 2009.
-
Electromagnetic Casimir Effect in Wedge Geometry and the Energy-Momentum Tensor in Media
Authors:
I. Brevik,
S. A. Ellingsen,
K. A. Milton
Abstract:
The wedge geometry closed by a circular-cylindrical arc is a nontrivial generalization of the cylinder, which may have various applications. If the radial boundaries are not perfect conductors, the angular eigenvalues are only implicitly determined. When the speed of light is the same on both sides of the wedge, the Casimir energy is finite, unlike the case of a perfect conductor, where there is…
▽ More
The wedge geometry closed by a circular-cylindrical arc is a nontrivial generalization of the cylinder, which may have various applications. If the radial boundaries are not perfect conductors, the angular eigenvalues are only implicitly determined. When the speed of light is the same on both sides of the wedge, the Casimir energy is finite, unlike the case of a perfect conductor, where there is a divergence associated with the corners where the radial planes meet the circular arc. We advance the study of this system by reporting results on the temperature dependence for the conducting situation. We also discuss the appropriate choice of the electromagnetic energy-momentum tensor.
△ Less
Submitted 3 December, 2009; v1 submitted 13 November, 2009;
originally announced November 2009.
-
Casimir-Polder Potential in Thermal Non-Equilibrium
Authors:
Simen Å. Ellingsen,
Yury Sherkunov,
Stefan Y. Buhmann,
Stefan Scheel
Abstract:
Different non-equilibrium situations have recently been considered when studying the thermal Casimir--Polder interaction with a body. We show that the Keldysh Green function method provides a very general common framework for such studies where non-equilibrium of either the atom or the body with the environment can be accounted for. We apply the results to the case of ground state polar molecules…
▽ More
Different non-equilibrium situations have recently been considered when studying the thermal Casimir--Polder interaction with a body. We show that the Keldysh Green function method provides a very general common framework for such studies where non-equilibrium of either the atom or the body with the environment can be accounted for. We apply the results to the case of ground state polar molecules out of equilibrium with their environment, observing several striking effects. We consider thermal Casimir--Polder potentials in planar configurations, and new results for a molecule in a cylindrical cavity are reported, showing similar characteristic behaviour as found in planar geometry.
△ Less
Submitted 18 May, 2010; v1 submitted 29 October, 2009;
originally announced October 2009.
-
Enhancement of thermal Casimir-Polder potentials of ground-state polar molecules in a planar cavity
Authors:
Simen A. Ellingsen,
Stefan Yoshi Buhmann,
Stefan Scheel
Abstract:
We analyze the thermal Casimir-Polder potential experienced by a ground-state molecule in a planar cavity and investigate the prospects for using such a set-up for molecular guiding. The resonant atom-field interaction associated with this non-equilibrium situation manifests itself in oscillating, standing-wave components of the potential. While the respective potential wells are normally too sh…
▽ More
We analyze the thermal Casimir-Polder potential experienced by a ground-state molecule in a planar cavity and investigate the prospects for using such a set-up for molecular guiding. The resonant atom-field interaction associated with this non-equilibrium situation manifests itself in oscillating, standing-wave components of the potential. While the respective potential wells are normally too shallow to be useful, they may be amplified by a highly reflecting cavity whose width equals a half-integer multiple of a particular molecular transition frequency. We find that with an ideal choice of molecule and the use of ultra-high reflectivity Bragg mirror cavity, it may be possible to boost the potential by up to two orders of magnitude. We analytically derive the scaling of the potential depth as a function of reflectivity and analyze how it varies with temperature and molecular properties. It is also shown how the potential depth decreases for standing waves with a larger number of nodes. Finally, we investigate the lifetime of the molecular ground state in a thermal environment and find that it is not greatly influenced by the cavity and remains in the order of several seconds.
△ Less
Submitted 4 January, 2010; v1 submitted 12 June, 2009;
originally announced June 2009.
-
Electrodynamic Casimir Effect in a Medium-Filled Wedge II
Authors:
Simen Adnoy Ellingsen,
Iver Brevik,
Kimball A. Milton
Abstract:
We consider the Casimir energy in a geometry of an infinite magnetodielectric wedge closed by a circularly cylindrical, perfectly conducting arc embedded in another magnetodielectric medium, under the condition that the speed of light be the same in both media. An expression for the Casimir energy corresponding to the arc is obtained and it is found that in the limit where the reflectivity of th…
▽ More
We consider the Casimir energy in a geometry of an infinite magnetodielectric wedge closed by a circularly cylindrical, perfectly conducting arc embedded in another magnetodielectric medium, under the condition that the speed of light be the same in both media. An expression for the Casimir energy corresponding to the arc is obtained and it is found that in the limit where the reflectivity of the wedge boundaries tends to unity the finite part of the Casimir energy of a perfectly conducting wedge-shaped sheet closed by a circular cylinder is regained. The energy of the latter geometry possesses divergences due to the presence of sharp corners. We argue how this is a pathology of the assumption of ideal conductor boundaries, and that no analogous term enters in the present geometry.
△ Less
Submitted 24 July, 2009; v1 submitted 13 May, 2009;
originally announced May 2009.
-
Electrodynamic Casimir Effect in a Medium-Filled Wedge
Authors:
Iver Brevik,
Simen Å Ellingsen,
Kimball A. Milton
Abstract:
We re-examine the electrodynamic Casimir effect in a wedge defined by two perfect conductors making dihedral angle α=π/p. This system is analogous to the system defined by a cosmic string. We consider the wedge region as filled with an azimuthally symmetric material, with permittivity/permeability ε_1,μ_1 for distance from the axis r<a, and ε_2,μ_2 for r>a. The results are closely related to tho…
▽ More
We re-examine the electrodynamic Casimir effect in a wedge defined by two perfect conductors making dihedral angle α=π/p. This system is analogous to the system defined by a cosmic string. We consider the wedge region as filled with an azimuthally symmetric material, with permittivity/permeability ε_1,μ_1 for distance from the axis r<a, and ε_2,μ_2 for r>a. The results are closely related to those for a circular-cylindrical geometry, but with non-integer azimuthal quantum number mp. Apart from a zero-mode divergence, which may be removed by choosing periodic boundary conditions on the wedge, and may be made finite if dispersion is included, we obtain finite results for the free energy corresponding to changes in 'a' for the case when the speed of light is the same inside and outside the radius 'a', and for weak coupling, |ε_1- ε_2| \ll 1, for purely dielectric media. We also consider the radiation produced by the sudden appearance of an infinite cosmic string, situated along the cusp line of the pre-existing wedge.
△ Less
Submitted 19 March, 2009; v1 submitted 27 January, 2009;
originally announced January 2009.
-
Dynamics of thermal Casimir-Polder forces on polar molecules
Authors:
S. A. Ellingsen,
S. Y. Buhmann,
S. Scheel
Abstract:
We study the influence of thermal Casimir-Polder forces on the near-surface trapping of cold polar molecules, with emphasis on LiH and YbF near an Au surface at room temperature. We show that for a molecule initially prepared in its electronic and rovibrational ground state, the Casimir-Polder force oscillates with the molecule-wall separation. The non-resonant force contribution and the evanesc…
▽ More
We study the influence of thermal Casimir-Polder forces on the near-surface trapping of cold polar molecules, with emphasis on LiH and YbF near an Au surface at room temperature. We show that for a molecule initially prepared in its electronic and rovibrational ground state, the Casimir-Polder force oscillates with the molecule-wall separation. The non-resonant force contribution and the evanescent part of the resonant force contribution almost exactly cancel at high temperature which results in a saturation of the (attractive) force in this limit. A dynamical calculation reveals how the spatial oscillations die out as thermalisation of the molecule with its environment sets in.
△ Less
Submitted 4 January, 2010; v1 submitted 10 December, 2008;
originally announced December 2008.
-
Casimir Lifshitz pressure and free energy: exploring a simple model
Authors:
Simen Å. Ellingsen
Abstract:
The Casimir effect, the dispersion force attracting neutral objects to each other, may be understood in terms of multiple scattering of light between the interacting bodies. We explore the simple model in which the bodies are assumed to possess reflection coefficients independent of the energy and angle of incidence of an impinging field and show how a multitude of information can be extracted w…
▽ More
The Casimir effect, the dispersion force attracting neutral objects to each other, may be understood in terms of multiple scattering of light between the interacting bodies. We explore the simple model in which the bodies are assumed to possess reflection coefficients independent of the energy and angle of incidence of an impinging field and show how a multitude of information can be extracted within the geometry of two parallel plates. The full thermal behaviour of the model is found and we discuss how non-analytic behaviour emerges in the combined limits of zero temperature and perfect reflection. Finally we discuss the possibility of a generalised force conjugate to the reflection coefficients of the interacting materials and how, if the materials involved were susceptible to changing their reflective properties, this would tend to enhance the Casimir attraction. The dependence of this correction on separation is studied for the constant reflection model, indicating that the effect is likely to be negligible under most experimental circumstances.
△ Less
Submitted 10 November, 2008;
originally announced November 2008.
-
Low temperature Casimir-Lifshitz free energy and entropy: the case of poor conductors
Authors:
Simen A. Ådnøy Ellingsen,
Iver Brevik,
Johan S. Høye,
Kimball A. Milton
Abstract:
The controversy concerning the temperature correction to the Casimir force has been ongoing for almost a decade with no view to a solution and has recently been extended to include semiconducting materials. We review some theoretical aspects of formal violations of Nernst's heat theorem in the context of Casimir Lifshitz thermodynamics and the role of the exponent of the leading term of the diel…
▽ More
The controversy concerning the temperature correction to the Casimir force has been ongoing for almost a decade with no view to a solution and has recently been extended to include semiconducting materials. We review some theoretical aspects of formal violations of Nernst's heat theorem in the context of Casimir Lifshitz thermodynamics and the role of the exponent of the leading term of the dielectric permittivity with respect to imaginary frequency. A general formalism for calculating the temperature corrections to free energy at low temperatures is developed for systems which do not exhibit such anomalies, and the low temperature behaviour of the free energy in a gap between half-spaces of poorly conducting materials modelled with a Drude type permittivity is calculated.
△ Less
Submitted 4 September, 2008;
originally announced September 2008.
-
Comment on "Casimir Force Acting on Magnetostatic Bodies Embedded in Media"
Authors:
Iver Brevik,
Simen A. Ellingsen
Abstract:
In a recent paper [C. Raabe and D.-G. Welsch, Phys. Rev. A 71, 013814 (2005)] an electromagnetic energy-momentum tensor is suggested as an alternative to the Abraham-Minkowski tensor and is applied to calculations of Casimir forces in planar geometries. We argue that the universality of the suggested tensor is doubtful; application of the Raabe-Welsch theory to a simple example in classical elec…
▽ More
In a recent paper [C. Raabe and D.-G. Welsch, Phys. Rev. A 71, 013814 (2005)] an electromagnetic energy-momentum tensor is suggested as an alternative to the Abraham-Minkowski tensor and is applied to calculations of Casimir forces in planar geometries. We argue that the universality of the suggested tensor is doubtful; application of the Raabe-Welsch theory to a simple example in classical electrodynamics shows that their proposed tensor is unable to describe the situation in a simple way. We also show that modified Casimir forces acting on the cavity medium as prescribed by these authors suffer from problems of definiteness and peculiar properties which call for experimental support before this theory can be regarded as acceptable.
△ Less
Submitted 18 June, 2008;
originally announced June 2008.
-
Temperature Correction to Casimir-Lifshitz Free Energy at Low Temperatures: Semiconductors
Authors:
Simen A. Ellingsen,
Iver Brevik,
Johan S. Høye,
Kimball A. Milton
Abstract:
The Casimir force and free energy at low temperatures has been the subject of focus for some time. We calculate the temperature correction to the Casimir-Lifshitz free energy between two parallel plates made of dielectric material possessing a constant conductivity at low temperatures, described through a Drude-type dielectric function. For the transverse magnetic (TM) mode such a calculation is…
▽ More
The Casimir force and free energy at low temperatures has been the subject of focus for some time. We calculate the temperature correction to the Casimir-Lifshitz free energy between two parallel plates made of dielectric material possessing a constant conductivity at low temperatures, described through a Drude-type dielectric function. For the transverse magnetic (TM) mode such a calculation is new. A further calculation for the case of the TE mode is thereafter presented which extends and generalizes previous work for metals. A numerical study is undertaken to verify the correctness of the analytic results.
△ Less
Submitted 23 July, 2008; v1 submitted 20 May, 2008;
originally announced May 2008.
-
Frequency spectrum of the Casimir force: interpretation and a paradox
Authors:
Simen A. Ellingsen
Abstract:
The frequency spectrum of the Casimir force between two plates separated by vacuum as it appears in the Lifshitz formalism is reexamined and generalised as compared to previous works to allow for imperfectly reflecting plates. As previously reported by Ford [Phys. Rev. A \textbf{48} (1993) 2962], the highly oscillatory nature of the frequency dependence of the Casimir force points to possibiliti…
▽ More
The frequency spectrum of the Casimir force between two plates separated by vacuum as it appears in the Lifshitz formalism is reexamined and generalised as compared to previous works to allow for imperfectly reflecting plates. As previously reported by Ford [Phys. Rev. A \textbf{48} (1993) 2962], the highly oscillatory nature of the frequency dependence of the Casimir force points to possibilities for very large and indeed negative Casimir forces if the frequency-dependent dielectric response, $ε(ω)$, of the materials could be tuned. A paradox occurs, however, because an alternative calculation of the effect of a perturbation of $ε(ω)$ involving a Wick rotation to imaginary frequencies indicate only very modest effects. A recent experiment appears to convincingly rule out the reality of Ford's optimistic predictions, although given the enormous technological promise of such frequency effects, further theoretical and experimental study is called for.
△ Less
Submitted 16 April, 2008;
originally announced April 2008.
-
Reply to "Comment on 'Analytic and Numerical Verification of the Nernst Theorem for Metals'"
Authors:
Johan S. Høye,
Iver Brevik,
Simen A. Ellingsen,
Jan B. Aarseth
Abstract:
In this Reply to the preceding Comment of Klimchitskaya and Mostepanenko (cf. also quant-ph/0703214), we summarize and maintain our position that the Drude dispersion relation when inserted in the Lifshitz formula gives a thermodynamically satisfactory description of the Casimir force, also in the limiting case when the relaxation frequency goes to zero (perfect crystals).
In this Reply to the preceding Comment of Klimchitskaya and Mostepanenko (cf. also quant-ph/0703214), we summarize and maintain our position that the Drude dispersion relation when inserted in the Lifshitz formula gives a thermodynamically satisfactory description of the Casimir force, also in the limiting case when the relaxation frequency goes to zero (perfect crystals).
△ Less
Submitted 18 January, 2008;
originally announced January 2008.
-
Analytical and Numerical Demonstration of How the Drude Dispersive Model Satisfies Nernst's Theorem for the Casimir Entropy
Authors:
Iver Brevik,
Simen A. Ellingsen,
Johan S. Høye,
Kimball A. Milton
Abstract:
In view of the current discussion on the subject, an effort is made to show very accurately both analytically and numerically how the Drude dispersive model, assuming the relaxation is nonzero at zero temperature (which is the case when impurities are present), gives consistent results for the Casimir free energy at low temperatures. Specifically, we find that the free energy consists essentiall…
▽ More
In view of the current discussion on the subject, an effort is made to show very accurately both analytically and numerically how the Drude dispersive model, assuming the relaxation is nonzero at zero temperature (which is the case when impurities are present), gives consistent results for the Casimir free energy at low temperatures. Specifically, we find that the free energy consists essentially of two terms, one leading term proportional to T^2, and a next term proportional to T^{5/2}. Both these terms give rise to zero Casimir entropy as T -> 0, thus in accordance with Nernst's theorem.
△ Less
Submitted 24 December, 2007; v1 submitted 25 October, 2007;
originally announced October 2007.
-
Concerning verification of the Nernst theorem for Casimir-Lifshitz free energy
Authors:
Simen A. Ellingsen
Abstract:
By regarding the Lifshitz expression for the Casimir free energy on the real frequency axis rather than the imaginary Matsubara frequencies as is customary, new light is shed on the ongoing debate regarding the thermodynamical consistency of this theory in combination with common permittivity models. It is argued that when permittivity is temperature independent over a temperature interval inclu…
▽ More
By regarding the Lifshitz expression for the Casimir free energy on the real frequency axis rather than the imaginary Matsubara frequencies as is customary, new light is shed on the ongoing debate regarding the thermodynamical consistency of this theory in combination with common permittivity models. It is argued that when permittivity is temperature independent over a temperature interval including zero temperature, a cavity made of causal material with continuous dispersion properties separated by vacuum cannot violate Nernst's theorem (the third law of thermodynamics). The purported violation of this theorem pertains to divergencies in the double limit in which frequency and temperature vanish simultaneously. While any model should abide by the laws of thermodynamics within its range of applicability, we emphasise that the Nernst heat theorem is a relevant criterion for choosing amongst candidate theories only when these theories are fully applicable at zero temperature and frequency.
△ Less
Submitted 28 July, 2008; v1 submitted 4 October, 2007;
originally announced October 2007.
-
Analytical and Numerical Verification of the Nernst Theorem for Metals
Authors:
Johan S. Høye,
Iver Brevik,
Simen A. Ellingsen,
Jan B. Aarseth
Abstract:
In view of the current discussion on the subject, an effort is made to show very accurately both analytically and numerically how the Drude dispersion model gives consistent results for the Casimir free energy at low temperatures. Specifically, for the free energy near T=0 we find the leading term to be proportional to T^2 and the next-to-leading term proportional to T^{5/2}. These terms give ri…
▽ More
In view of the current discussion on the subject, an effort is made to show very accurately both analytically and numerically how the Drude dispersion model gives consistent results for the Casimir free energy at low temperatures. Specifically, for the free energy near T=0 we find the leading term to be proportional to T^2 and the next-to-leading term proportional to T^{5/2}. These terms give rise to zero Casimir entropy as T approaches zero, and is thus in accordance with Nernst's theorem.
△ Less
Submitted 12 May, 2007; v1 submitted 19 March, 2007;
originally announced March 2007.
-
Casimir Force on Real Materials - the Slab and Cavity Geometry
Authors:
Simen A. Ellingsen,
Iver Brevik
Abstract:
We analyse the potential of the geometry of a slab in a planar cavity for the purpose of Casimir force experiments. The force and its dependence on temperature, material properties and finite slab thickness are investigated both analytically and numerically for slab and walls made of aluminium and teflon FEP respectively. We conclude that such a setup is ideal for measurements of the temperature…
▽ More
We analyse the potential of the geometry of a slab in a planar cavity for the purpose of Casimir force experiments. The force and its dependence on temperature, material properties and finite slab thickness are investigated both analytically and numerically for slab and walls made of aluminium and teflon FEP respectively. We conclude that such a setup is ideal for measurements of the temperature dependence of the Casimir force. By numerical calculation it is shown that temperature effects are dramatically larger for dielectrics, suggesting that a dielectric such as teflon FEP whose properties vary little within a moderate temperature range, should be considered for experimental purposes. We finally discuss the subtle but fundamental matter of the various Green's two-point function approaches present in the literature and show how they are different formulations describing the same phenomenon.
△ Less
Submitted 13 February, 2007; v1 submitted 2 November, 2006;
originally announced November 2006.
-
Casimir attraction in multilayered plane parallel magnetodielectric systems
Authors:
Simen A. Ellingsen
Abstract:
A powerful procedure is presented for calculating the Casimir attraction between plane parallel multilayers made up of homogeneous regions with arbitrary magnetic and dielectric properties by use of the Minkowski energy-momentum tensor. The theory is applied to numerous geometries and shown to reproduce a number of results obtained by other authors. Although the various pieces of theory drawn up…
▽ More
A powerful procedure is presented for calculating the Casimir attraction between plane parallel multilayers made up of homogeneous regions with arbitrary magnetic and dielectric properties by use of the Minkowski energy-momentum tensor. The theory is applied to numerous geometries and shown to reproduce a number of results obtained by other authors. Although the various pieces of theory drawn upon are well known, the relative ease with which the Casimir force density in even complex planar structures may be calculated, appears not to be widely appreciated, and no single paper to the author's knowledge renders explicitly the procedure demonstrated herein. Results may be seen as an important building block in the settling of issues of fundamental interest, such as the long-standing dispute over the thermal behaviour of the Casimir force or the question of what is the correct stress tensor to apply, a discussion re-quickened by the newly suggested alternative theory due to Raabe and Welsch.
△ Less
Submitted 26 September, 2006; v1 submitted 23 July, 2006;
originally announced July 2006.
-
Thermal corrections to the Casimir effect
Authors:
Iver Brevik,
Simen A. Ellingsen,
Kimball A. Milton
Abstract:
The Casimir effect, reflecting quantum vacuum fluctuations in the electromagnetic field in a region with material boundaries, has been studied both theoretically and experimentally since 1948. The forces between dielectric and metallic surfaces both plane and curved have been measured at the 10 to 1 percent level in a variety of room-temperature experiments, and remarkable agreement with the zer…
▽ More
The Casimir effect, reflecting quantum vacuum fluctuations in the electromagnetic field in a region with material boundaries, has been studied both theoretically and experimentally since 1948. The forces between dielectric and metallic surfaces both plane and curved have been measured at the 10 to 1 percent level in a variety of room-temperature experiments, and remarkable agreement with the zero-temperature theory has been achieved. In fitting the data various corrections due to surface roughness, patch potentials, curvature, and temperature have been incorporated. It is the latter that is the subject of the present article. We point out that, in fact, no temperature dependence has yet been detected, and that the experimental situation is still too fluid to permit conclusions about thermal corrections to the Casimir effect. Theoretically, there are subtle issues concerning thermodynamics and electrodynamics which have resulted in disparate predictions concerning the nature of these corrections. However, a general consensus has seemed to emerge that suggests that the temperature correction to the Casimir effect is relatively large, and should be observable in future experiments involving surfaces separated at the few micrometer scale.
△ Less
Submitted 6 July, 2006; v1 submitted 29 April, 2006;
originally announced May 2006.
