-
Identification and Mitigation of Conducting Package Losses for Quantum Superconducting Devices
Authors:
Yizhou Huang,
Yi-Hsiang Huang,
Haozhi Wang,
Zach Steffen,
Jonathan Cripe,
F. C. Wellstood,
B. S. Palmer
Abstract:
Low-loss superconducting rf devices are required when used for quantum computation. Here, we present a series of measurements and simulations showing that conducting losses in the packaging of our superconducting resonator devices affect the maximum achievable internal quality factors (Qi) for a series of thin-film Al quarter-wave resonators with fundamental resonant frequencies varying between 4.…
▽ More
Low-loss superconducting rf devices are required when used for quantum computation. Here, we present a series of measurements and simulations showing that conducting losses in the packaging of our superconducting resonator devices affect the maximum achievable internal quality factors (Qi) for a series of thin-film Al quarter-wave resonators with fundamental resonant frequencies varying between 4.9 and 5.8 GHz. By utilizing resonators with different widths and gaps, different volumes of the stored electromagnetic energy were sampled thus affecting Qi. When the backside of the sapphire substrate of the resonator device is adhered to a Cu package with a conducting silver glue, a monotonic decrease in the maximum achievable Qi is found as the electromagnetic sampling volume is increased. This is a result of induced currents in large surface resistance regions and dissipation underneath the substrate. By placing a hole underneath the substrate and using superconducting material for the package, we decrease the ohmic losses and increase the maximum Qi for the larger size resonators.
△ Less
Submitted 3 August, 2023; v1 submitted 17 April, 2023;
originally announced April 2023.
-
Surpassing the Standard Quantum Limit using an Optical Spring
Authors:
Torrey Cullen,
Scott Aronson,
Ron Pagano,
Jonathan Cripe,
Safura Sharifi,
Michelle Lollie,
Henry Cain,
Paula Heu,
David Follman,
Garrett D Cole,
Nancy Aggarwal,
Thomas Corbitt
Abstract:
Quantum mechanics places noise limits and sensitivity restrictions on physical measurements. The balance between unwanted backaction and the precision of optical measurements impose a standard quantum limit (SQL) on interferometric systems. In order to realize a sensitivity below the SQL, it is necessary to leverage a back-action evading measurement technique, or else exploit cancellations of any…
▽ More
Quantum mechanics places noise limits and sensitivity restrictions on physical measurements. The balance between unwanted backaction and the precision of optical measurements impose a standard quantum limit (SQL) on interferometric systems. In order to realize a sensitivity below the SQL, it is necessary to leverage a back-action evading measurement technique, or else exploit cancellations of any excess noise contributions at the detector. %Many proof of principle experiments have been performed, but only recently has an experiment achieved sensitivity below the SQL. In this work, we extend that initial demonstration and realize sub-SQL measurement sensitivity nearly two times better than previous measurements, and with architecture applicable to interferometric gravitational wave detectors. In fact, this technique is directly applicable to Advanced LIGO, which could observe similar effects with a detuned signal recycling cavity. By exploiting quantum correlations created by an optical spring, we measure a total sensitivity below the SQL by $\textbf{2.8}$ dB, corresponding to a reduction in the noise power by $\textbf{72}\pm\textbf{5.1}$ \% below the quantum limit. Through the use of a detuned optical spring, this noise reduction is tunable, allowing us to choose the desired range of frequencies that fall below the SQL. This result demonstrates access to sensitivities well below the SQL at frequencies ranges applicable to LIGO, with the potential to extend the reach of gravitational wave detectors further into the universe.
△ Less
Submitted 26 July, 2024; v1 submitted 21 October, 2022;
originally announced October 2022.
-
Mechanical Quantum Sensing in the Search for Dark Matter
Authors:
Daniel Carney,
Gordan Krnjaic,
David C. Moore,
Cindy A. Regal,
Gadi Afek,
Sunil Bhave,
Benjamin Brubaker,
Thomas Corbitt,
Jonathan Cripe,
Nicole Crisosto,
Andrew Geraci,
Sohitri Ghosh,
Jack G. E. Harris,
Anson Hook,
Edward W. Kolb,
Jonathan Kunjummen,
Rafael F. Lang,
Tongcang Li,
Tongyan Lin,
Zhen Liu,
Joseph Lykken,
Lorenzo Magrini,
Jack Manley,
Nobuyuki Matsumoto,
Alissa Monte
, et al. (10 additional authors not shown)
Abstract:
Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mecha…
▽ More
Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mechanical systems, in both the classical and quantum regimes, have enabled unprecedented levels of sensitivity. In this white paper, we outline recent ideas in the potential use of a range of solid-state mechanical sensing technologies to aid in the search for dark matter in a number of energy scales and with a variety of coupling mechanisms.
△ Less
Submitted 13 August, 2020;
originally announced August 2020.
-
Quantum back action cancellation in the audio band
Authors:
Jonathan Cripe,
Torrey Cullen,
Yanbei Chen,
Paula Heu,
David Follman,
Garrett D. Cole,
Thomas Corbitt
Abstract:
We report on the cancellation of quantum back action noise in an optomechanical cavity. We perform two measurements of the displacement of the microresonator, one in reflection of the cavity, and one in transmission of the cavity. We show that measuring the amplitude quadrature of the light in transmission of the optomechanical cavity allows us to cancel the back action noise between 1 kHz and 50…
▽ More
We report on the cancellation of quantum back action noise in an optomechanical cavity. We perform two measurements of the displacement of the microresonator, one in reflection of the cavity, and one in transmission of the cavity. We show that measuring the amplitude quadrature of the light in transmission of the optomechanical cavity allows us to cancel the back action noise between 1 kHz and 50 kHz, and obtain a more sensitive measurement of the microresonator's position. To confirm that the back action is eliminated, we measure the noise in the transmission signal as a function of circulating power. By splitting the transmitted light onto two photodetectors and cross correlating the two signals, we remove the contributon from shot noise and measure a quantum noise free thermal noise spectrum. Eliminating the effects of back action in this frequency regime is an important demonstration of a technique that could be used to mitigate the effects of back action in interferometric gravitational wave detectors such as Advanced LIGO.
△ Less
Submitted 24 December, 2018;
originally announced December 2018.
-
Room temperature optomechanical squeezing
Authors:
Nancy Aggarwal,
Torrey Cullen,
Jonathan Cripe,
Garrett D. Cole,
Robert Lanza,
Adam Libson,
David Follman,
Paula Heu,
Thomas Corbitt,
Nergis Mavalvala
Abstract:
The radiation-pressure driven interaction of a coherent light field with a mechanical oscillator induces correlations between the amplitude and phase quadratures of the light. These correlations result in squeezed light -- light with quantum noise lower than shot noise in some quadratures, and higher in others. Due to this lower quantum uncertainty, squeezed light can be used to improve the sensit…
▽ More
The radiation-pressure driven interaction of a coherent light field with a mechanical oscillator induces correlations between the amplitude and phase quadratures of the light. These correlations result in squeezed light -- light with quantum noise lower than shot noise in some quadratures, and higher in others. Due to this lower quantum uncertainty, squeezed light can be used to improve the sensitivity of precision measurements. In particular, squeezed light sources based on nonlinear optical crystals are being used to improve the sensitivity of gravitational wave (GW) detectors. For optomechanical squeezers, thermally driven fluctuations of the mechanical oscillator's position makes it difficult to observe the quantum correlations at room temperature, and at low frequencies. Here we present a measurement of optomechanically (OM) squeezed light, performed at room-temperature, in a broad band near audio-frequency regions relevant to GW detectors. We observe sub-poissonian quantum noise in a frequency band of 30 kHz to 70 kHz with a maximum reduction of 0.7 $\pm$ 0.1 dB below shot noise at 45 kHz. We present two independent methods of measuring this squeezing, one of which does not rely on calibration of shot noise.
△ Less
Submitted 24 December, 2018;
originally announced December 2018.
-
Broadband reduction of quantum radiation pressure noise via squeezed light injection
Authors:
Min Jet Yap,
Jonathan Cripe,
Georgia L. Mansell,
Terry G. McRae,
Robert L. Ward,
Bram J. J. Slagmolen,
Daniel A. Shaddock,
Paula Heu,
David Follman,
Garrett D. Cole,
David E. McClelland,
Thomas Corbitt
Abstract:
We present the reduction and manipulation of quantum radiation pressure noise (QRPN) in an optomechanical cavity with the injection of squeezed light. The optomechanical system consists of a high-reflectivity single-crystal microresonator which serves as one mirror of a Fabry-Perot cavity. The experiment is performed at room temperature and is QRPN dominated between 10 kHz and 50 kHz, frequencies…
▽ More
We present the reduction and manipulation of quantum radiation pressure noise (QRPN) in an optomechanical cavity with the injection of squeezed light. The optomechanical system consists of a high-reflectivity single-crystal microresonator which serves as one mirror of a Fabry-Perot cavity. The experiment is performed at room temperature and is QRPN dominated between 10 kHz and 50 kHz, frequencies relevant to gravitational wave observatories. We observed a reduction of 1.2 dB in the measurement noise floor with the injection of amplitude squeezed light generated from a below-threshold degenerate optical parametric oscillator. This experiment is a crucial step in realizing the reduction of QRPN for future interferometric gravitational wave detectors and improving their sensitivity.
△ Less
Submitted 23 December, 2018;
originally announced December 2018.
-
Observation of a room-temperature oscillator's motion dominated by quantum fluctuations over a broad audio-frequency band
Authors:
Jonathan Cripe,
Nancy Aggarwal,
Robert Lanza,
Adam Libson,
Robinjeet Singh,
Paula Heu,
David Follman,
Garrett D. Cole,
Nergis Mavalvala,
Thomas Corbitt
Abstract:
We report on the broadband measurement of quantum radiation pressure noise (QRPN) in an optomechanical cavity at room temperature over a broad range of frequencies relevant to gravitational-wave detectors. We show that QRPN drives the motion of a high-reflectivity single-crystal microresonator, which serves as one mirror of a Fabry-Perot cavity. In our measurements QRPN dominates over all other no…
▽ More
We report on the broadband measurement of quantum radiation pressure noise (QRPN) in an optomechanical cavity at room temperature over a broad range of frequencies relevant to gravitational-wave detectors. We show that QRPN drives the motion of a high-reflectivity single-crystal microresonator, which serves as one mirror of a Fabry-Perot cavity. In our measurements QRPN dominates over all other noise between 10 kHz and 50 kHz and scales as expected with the circulating power inside the cavity. The thermal noise of the microresonator, the largest noise source next to the QRPN, is measured and shown to agree with a structural damping model from 200 Hz to 30 kHz. By observing the effects of QRPN in the audio-band, we now have a testbed for studying techniques to mitigate back-action, such as variational readout and squeezed light injection, that could be used to improve the sensitivity of gravitational-wave detectors.
△ Less
Submitted 27 February, 2018;
originally announced February 2018.
-
Observation of an Optical Spring With a Beamsplitter
Authors:
Jonathan Cripe,
Baylee Danz,
Benjamin Lane,
Mary Catherine Lorio,
Julia Falcone,
Garrett D. Cole,
Thomas Corbitt
Abstract:
We present the experimental observation of an optical spring without the use of an optical cavity. The optical spring is produced by interference at a beamsplitter and, in principle, does not have the damping force associated with optical springs created in detuned cavities. The experiment consists of a Michelson-Sagnac interferometer (with no recycling cavities) with a partially reflective GaAs m…
▽ More
We present the experimental observation of an optical spring without the use of an optical cavity. The optical spring is produced by interference at a beamsplitter and, in principle, does not have the damping force associated with optical springs created in detuned cavities. The experiment consists of a Michelson-Sagnac interferometer (with no recycling cavities) with a partially reflective GaAs microresonator as the beamsplitter that produces the optical spring. Our experimental measurements at input powers of up to 360 mW show the shift of the optical spring frequency as a function of power and are in excellent agreement with theoretical predictions. In addition, we show that the optical spring is able to keep the interferometer stable and locked without the use of external feedback.
△ Less
Submitted 5 December, 2017; v1 submitted 1 December, 2017;
originally announced December 2017.
-
Radiation-Pressure-Mediated Control of an Optomechanical Cavity
Authors:
Jonathan Cripe,
Nancy Aggarwal,
Robinjeet Singh,
Robert Lanza,
Adam Libson,
Min Jet Yap,
Garrett D. Cole,
David E. McClelland,
Nergis Mavalvala,
Thomas Corbitt
Abstract:
We describe and demonstrate a method to control a detuned movable-mirror Fabry-Perot cavity using radiation pressure in the presence of a strong optical spring. At frequencies below the optical spring resonance, self-locking of the cavity is achieved intrinsically by the optomechanical (OM) interaction between the cavity field and the movable end mirror. The OM interaction results in a high rigidi…
▽ More
We describe and demonstrate a method to control a detuned movable-mirror Fabry-Perot cavity using radiation pressure in the presence of a strong optical spring. At frequencies below the optical spring resonance, self-locking of the cavity is achieved intrinsically by the optomechanical (OM) interaction between the cavity field and the movable end mirror. The OM interaction results in a high rigidity and reduced susceptibility of the mirror to external forces. However, due to a finite delay time in the cavity, this enhanced rigidity is accompanied by an anti-damping force, which destabilizes the cavity. The cavity is stabilized by applying external feedback in a frequency band around the optical spring resonance. The error signal is sensed in the amplitude quadrature of the transmitted beam with a photodetector. An amplitude modulator in the input path to the cavity modulates the light intensity to provide the stabilizing radiation pressure force.
△ Less
Submitted 4 December, 2017; v1 submitted 12 October, 2017;
originally announced October 2017.
-
A Stable Optical Trap from a Single Optical Field Utilizing Birefringence
Authors:
Robinjeet Singh,
Garrett D. Cole,
Jonathan Cripe,
Thomas Corbitt
Abstract:
We report a stable double optical spring effect in an optical cavity pumped with a single optical field that arises as a result of birefringence. One end of the cavity is formed by a multilayer Al$_{0.92}$Ga$_{0.08}$As/GaAs stack supported by a microfabricated cantilever, with a natural mode frequency of $274$ Hz. The optical spring shifts the resonance to $21$ kHz, corresponding to a suppression…
▽ More
We report a stable double optical spring effect in an optical cavity pumped with a single optical field that arises as a result of birefringence. One end of the cavity is formed by a multilayer Al$_{0.92}$Ga$_{0.08}$As/GaAs stack supported by a microfabricated cantilever, with a natural mode frequency of $274$ Hz. The optical spring shifts the resonance to $21$ kHz, corresponding to a suppression of low frequency vibrations by a factor of more than $10^{4}$. The stable nature of the optical trap allows the cavity to be operated without any external feedback and with only a single optical field incident.
△ Less
Submitted 18 October, 2016; v1 submitted 6 June, 2016;
originally announced June 2016.
