Showing 1–14 of 14 results for author: Brecht, T

Two-dimensional Si spin qubit arrays with multilevel interconnects

Authors: Sieu D. Ha, Edwin Acuna, Kate Raach, Zachery T. Bloom, Teresa L. Brecht, James M. Chappell, Maxwell D. Choi, Justin E. Christensen, Ian T. Counts, Dominic Daprano, J. P. Dodson, Kevin Eng, David J. Fialkow, Christina A. C. Garcia, Wonill Ha, Thomas R. B. Harris, nathan holman, Isaac Khalaf, Justine W. Matten, Christi A. Peterson, Clifford E. Plesha, Matthew J. Ruiz, Aaron Smith, Bryan J. Thomas, Samuel J. Whiteley , et al. (4 additional authors not shown)

Abstract: The promise of quantum computation is contingent upon physical qubits with both low gate error rate and broad scalability. Silicon-based spins are a leading qubit platform, but demonstrations to date have not utilized fabrication processes capable of extending arrays in two dimensions while maintaining complete control of individual spins. Here, we implement an interconnect process, common in semi… ▽ More The promise of quantum computation is contingent upon physical qubits with both low gate error rate and broad scalability. Silicon-based spins are a leading qubit platform, but demonstrations to date have not utilized fabrication processes capable of extending arrays in two dimensions while maintaining complete control of individual spins. Here, we implement an interconnect process, common in semiconductor manufacturing, with multiple back-end-of-line layers to show an extendable two-dimensional array of spins with fully controllable nearest-neighbor exchange interactions. In a device using three interconnect layers, we encode exchange-only qubits and achieve average single-qubit gate fidelities consistent with single-layer devices, including fidelities greater than 99.9%, as measured by blind randomized benchmarking. Moreover, with spin connectivity in two dimensions, we show that both linear and right-angle exchange-only qubits with high performance can be formed, enabling qubit array reconfigurability in the presence of defects. This extendable device platform demonstrates that industrial manufacturing techniques can be leveraged for scalable spin qubit technologies. △ Less

Submitted 12 February, 2025; originally announced February 2025.

Full-permutation dynamical decoupling in triple-quantum-dot spin qubits

Authors: Bo Sun, Teresa Brecht, Bryan Fong, Moonmoon Akmal, Jacob Z. Blumoff, Tyler A. Cain, Faustin W. Carter, Dylan H. Finestone, Micha N. Fireman, Wonill Ha, Anthony T. Hatke, Ryan M. Hickey, Clayton A. C. Jackson, Ian Jenkins, Aaron M. Jones, Andrew Pan, Daniel R. Ward, Aaron J. Weinstein, Samuel J. Whiteley, Parker Williams, Matthew G. Borselli, Matthew T. Rakher, Thaddeus D. Ladd

Abstract: Dynamical decoupling of spin qubits in silicon can enhance fidelity and be used to extract the frequency spectra of noise processes. We demonstrate a full-permutation dynamical decoupling technique that cyclically exchanges the spins in a triple-dot qubit. This sequence not only suppresses both low frequency charge-noise- and magnetic-noise-induced errors; it also refocuses leakage errors to first… ▽ More Dynamical decoupling of spin qubits in silicon can enhance fidelity and be used to extract the frequency spectra of noise processes. We demonstrate a full-permutation dynamical decoupling technique that cyclically exchanges the spins in a triple-dot qubit. This sequence not only suppresses both low frequency charge-noise- and magnetic-noise-induced errors; it also refocuses leakage errors to first order, which is particularly interesting for encoded exchange-only qubits. For a specific construction, which we call NZ1y, the qubit is isolated from error sources to such a degree that we measure a remarkable exchange pulse error of $5\times10^{-5}$. This sequence maintains a quantum state for roughly 18,000 exchange pulses, extending the qubit coherence from $T_2^*=2~μ$s to $T_2 = 720~μ$s. We experimentally validate an error model that includes $1/f$ charge noise and $1/f$ magnetic noise in two ways: by direct exchange-qubit simulation, and by integration of the assumed noise spectra with derived filter functions, both of which reproduce the measured error and leakage with respect to changing the repetition rate. △ Less

Submitted 7 September, 2022; v1 submitted 24 August, 2022; originally announced August 2022.

Comments: 12 pages, 4 figures

Fast and high-fidelity state preparation and measurement in triple-quantum-dot spin qubits

Authors: Jacob Z. Blumoff, Andrew S. Pan, Tyler E. Keating, Reed W. Andrews, David W. Barnes, Teresa L. Brecht, Edward T. Croke, Larken E. Euliss, Jacob A. Fast, Clayton A. C. Jackson, Aaron M. Jones, Joseph Kerckhoff, Robert K. Lanza, Kate Raach, Bryan J. Thomas, Roland Velunta, Aaron J. Weinstein, Thaddeus D. Ladd, Kevin Eng, Matthew G. Borselli, Andrew T. Hunter, Matthew T. Rakher

Abstract: We demonstrate rapid, high-fidelity state preparation and measurement in exchange-only Si/SiGe triple-quantum-dot qubits. Fast measurement integration ($980$ ns) and initialization ($\approx 300$ ns) operations are performed with all-electrical, baseband control. We emphasize a leakage-sensitive joint initialization and measurement metric, developed in the context of exchange-only qubits but appli… ▽ More We demonstrate rapid, high-fidelity state preparation and measurement in exchange-only Si/SiGe triple-quantum-dot qubits. Fast measurement integration ($980$ ns) and initialization ($\approx 300$ ns) operations are performed with all-electrical, baseband control. We emphasize a leakage-sensitive joint initialization and measurement metric, developed in the context of exchange-only qubits but applicable more broadly, and report an infidelity of $2.5\pm0.5\times 10^{-3}$. This result is enabled by a high-valley-splitting heterostructure, initialization at the 2-to-3 electron charge boundary, and careful assessment and mitigation of $T_1$ during spin-to-charge conversion. The ultimate fidelity is limited by a number of comparably-important factors, and we identify clear paths towards further improved fidelity and speed. Along with an observed single-qubit randomized benchmarking error rate of $1.7\times 10^{-3}$, this work demonstrates initialization, control, and measurement of Si/SiGe triple-dot qubits at fidelities and durations which are promising for scalable quantum information processing. △ Less

Submitted 28 January, 2022; v1 submitted 17 December, 2021; originally announced December 2021.

Journal ref: PRX Quantum 3, 010352 (2022)

Detuning Axis Pulsed Spectroscopy of Valley-Orbital States in Si/SiGe Quantum Dots

Authors: Edward H. Chen, Kate Raach, Andrew Pan, Andrey A. Kiselev, Edwin Acuna, Jacob Z. Blumoff, Teresa Brecht, Maxwell Choi, Wonill Ha, Daniel Hulbert, Michael P. Jura, Tyler Keating, Ramsey Noah, Bo Sun, Bryan J. Thomas, Matthew Borselli, C. A. C. Jackson, Matthew T. Rakher, Richard S. Ross

Abstract: Silicon quantum dot qubits must contend with low-lying valley excited states which are sensitive functions of the quantum well heterostructure and disorder; quantifying and maximizing the energies of these states are critical to improving device performance. We describe a spectroscopic method for probing excited states in isolated Si/SiGe double quantum dots using standard baseband pulsing techniq… ▽ More Silicon quantum dot qubits must contend with low-lying valley excited states which are sensitive functions of the quantum well heterostructure and disorder; quantifying and maximizing the energies of these states are critical to improving device performance. We describe a spectroscopic method for probing excited states in isolated Si/SiGe double quantum dots using standard baseband pulsing techniques, easing the extraction of energy spectra in multiple-dot devices. We use this method to measure dozens of valley excited state energies spanning multiple wafers, quantum dots, and orbital states, crucial for evaluating the dependence of valley splitting on quantum well width and other epitaxial conditions. Our results suggest that narrower wells can be beneficial for improving valley splittings, but this effect can be confounded by variations in growth and fabrication conditions. These results underscore the importance of valley splitting measurements for guiding the development of Si qubits. △ Less

Submitted 26 February, 2021; v1 submitted 9 October, 2020; originally announced October 2020.

Comments: 13 pages, 12 figures. accepted for publication by Physical Review Applied

Journal ref: Phys. Rev. Applied 15, 044033 (2021)

Materials loss measurements using superconducting microwave resonators

Authors: Corey Rae Harrington McRae, Haozhi Wang, Jiansong Gao, Michael Vissers, Teresa Brecht, Andrew Dunsworth, David Pappas, Josh Mutus

Abstract: The performance of superconducting circuits for quantum computing is limited by materials losses. In particular, coherence times are typically bounded by two-level system (TLS) losses at single photon powers and millikelvin temperatures. The identification of low loss fabrication techniques, materials, and thin film dielectrics is critical to achieving scalable architectures for superconducting qu… ▽ More The performance of superconducting circuits for quantum computing is limited by materials losses. In particular, coherence times are typically bounded by two-level system (TLS) losses at single photon powers and millikelvin temperatures. The identification of low loss fabrication techniques, materials, and thin film dielectrics is critical to achieving scalable architectures for superconducting quantum computing. Superconducting microwave resonators provide a convenient qubit proxy for assessing performance and studying TLS loss and other mechanisms relevant to superconducting circuits such as non-equilibrium quasiparticles and magnetic flux vortices. In this review article, we provide an overview of considerations for designing accurate resonator experiments to characterize loss, including applicable types of loss, cryogenic setup, device design, and methods for extracting material and interface losses, summarizing techniques that have been evolving for over two decades. Results from measurements of a wide variety of materials and processes are also summarized. Lastly, we present recommendations for the reporting of loss data from superconducting microwave resonators to facilitate materials comparisons across the field. △ Less

Submitted 21 September, 2020; v1 submitted 8 June, 2020; originally announced June 2020.

Comments: Review Article

Quantum back-action of variable-strength measurement

Authors: M. Hatridge, S. Shankar, M. Mirrahimi, F. Schackert, K. Geerlings, T. Brecht, K. M. Sliwa, B. Abdo, L. Frunzio, S. M. Girvin, R. J. Schoelkopf, M. H. Devoret

Abstract: Measuring a quantum system can randomly perturb its state. The strength and nature of this back-action depends on the quantity which is measured. In a partial measurement performed by an ideal apparatus, quantum physics predicts that the system remains in a pure state whose evolution can be tracked perfectly from the measurement record. We demonstrate this property using a superconducting qubit di… ▽ More Measuring a quantum system can randomly perturb its state. The strength and nature of this back-action depends on the quantity which is measured. In a partial measurement performed by an ideal apparatus, quantum physics predicts that the system remains in a pure state whose evolution can be tracked perfectly from the measurement record. We demonstrate this property using a superconducting qubit dispersively coupled to a cavity traversed by a microwave signal. The back-action on the qubit state of a single measurement of both signal quadratures is observed and shown to produce a stochastic operation whose action is determined by the measurement result. This accurate monitoring of a qubit state is an essential prerequisite for measurement-based feedback control of quantum systems. △ Less

Submitted 27 March, 2019; originally announced March 2019.

Journal ref: Science 11 Jan 2013: Vol. 339, Issue 6116, pp. 178-181

Micromachined integrated quantum circuit containing a superconducting qubit

Authors: T. Brecht, Y. Chu, C. Axline, W. Pfaff, J. Z. Blumoff, K. Chou, L. Krayzman, L. Frunzio, R. J. Schoelkopf

Abstract: We present a device demonstrating a lithographically patterned transmon integrated with a micromachined cavity resonator. Our two-cavity, one-qubit device is a multilayer microwave integrated quantum circuit (MMIQC), comprising a basic unit capable of performing circuit-QED (cQED) operations. We describe the qubit-cavity coupling mechanism of a specialized geometry using an electric field picture… ▽ More We present a device demonstrating a lithographically patterned transmon integrated with a micromachined cavity resonator. Our two-cavity, one-qubit device is a multilayer microwave integrated quantum circuit (MMIQC), comprising a basic unit capable of performing circuit-QED (cQED) operations. We describe the qubit-cavity coupling mechanism of a specialized geometry using an electric field picture and a circuit model, and finally obtain specific system parameters using simulations. Fabrication of the MMIQC includes lithography, etching, and metallic bonding of silicon wafers. Superconducting wafer bonding is a critical capability that is demonstrated by a micromachined storage cavity lifetime $34.3~\mathrm{μs}$, corresponding to a quality factor of 2 million at single-photon energies. The transmon coherence times are $T_1=6.4~\mathrm{μs}$, and $T_2^{Echo}= 11.7~\mathrm{μs}$. We measure qubit-cavity dispersive coupling with rate $χ_{qμ}/2π=-1.17~$MHz, constituting a Jaynes-Cummings system with an interaction strength $g/2π=49~$MHz. With these parameters we are able to demonstrate cQED operations in the strong dispersive regime with ease. Finally, we highlight several improvements and anticipated extensions of the technology to complex MMIQCs. △ Less

Submitted 7 November, 2016; originally announced November 2016.

Journal ref: Phys. Rev. Applied 8, 039902 (2017)

Suspending superconducting qubits by silicon micromachining

Authors: Y. Chu, C. Axline, C. Wang, T. Brecht, Y. Y. Gao, L. Frunzio, R. J. Schoelkopf

Abstract: We present a method for relieving aluminum 3D transmon qubits from a silicon substrate using micromachining. Our technique is a high yield, one-step deep reactive ion etch that requires no additional fabrication processes, and results in the suspension of the junction area and edges of the aluminum film. The drastic change in the device geometry affects both the dielectric and flux noise environme… ▽ More We present a method for relieving aluminum 3D transmon qubits from a silicon substrate using micromachining. Our technique is a high yield, one-step deep reactive ion etch that requires no additional fabrication processes, and results in the suspension of the junction area and edges of the aluminum film. The drastic change in the device geometry affects both the dielectric and flux noise environment experienced by the qubit. In particular, the participation ratios of various dielectric interfaces are significantly modified, and suspended qubits exhibited longer $T_1$'s than non-suspended ones. We also find that suspension increases the flux noise experienced by tunable SQUID-based qubits. △ Less

Submitted 9 June, 2016; originally announced June 2016.

Comments: Main text: 4 pages, 3 figures. Supplementary materials: 6 pages, 5 figures

Surface participation and dielectric loss in superconducting qubits

Authors: Chen Wang, Christopher Axline, Yvonne Y. Gao, Teresa Brecht, Luigi Frunzio, Michel H. Devoret, Robert J. Schoelkopf

Abstract: We study the energy relaxation times ($T_1$) of superconducting transmon qubits in 3D cavities as a function of dielectric participation ratios of material surfaces. This surface participation ratio, representing the fraction of electric field energy stored in a dissipative surface layer, is computed by a two-step finite-element simulation and experimentally varied by qubit geometry. With a clean… ▽ More We study the energy relaxation times ($T_1$) of superconducting transmon qubits in 3D cavities as a function of dielectric participation ratios of material surfaces. This surface participation ratio, representing the fraction of electric field energy stored in a dissipative surface layer, is computed by a two-step finite-element simulation and experimentally varied by qubit geometry. With a clean electromagnetic environment and suppressed non-equilibrium quasiparticle density, we find an approximately proportional relation between the transmon relaxation rates and surface participation ratios. These results suggest dielectric dissipation arising from material interfaces is the major limiting factor for the $T_1$ of transmons in 3D cQED architecture. Our analysis also supports the notion of spatial discreteness of surface dielectric dissipation. △ Less

Submitted 15 October, 2015; v1 submitted 6 September, 2015; originally announced September 2015.

Comments: Main text: 5 pages 4 figures; Supplementary Materials: 6 pages 4 figures 1 table

Journal ref: Appl. Phys. Lett. 107, 162601 (2015)

Multilayer microwave integrated quantum circuits for scalable quantum computing

Authors: T. Brecht, W. Pfaff, C. Wang, Y. Chu, L. Frunzio, M. H. Devoret, R. J. Schoelkopf

Abstract: As experimental quantum information processing (QIP) rapidly advances, an emerging challenge is to design a scalable architecture that combines various quantum elements into a complex device without compromising their performance. In particular, superconducting quantum circuits have successfully demonstrated many of the requirements for quantum computing, including coherence levels that approach t… ▽ More As experimental quantum information processing (QIP) rapidly advances, an emerging challenge is to design a scalable architecture that combines various quantum elements into a complex device without compromising their performance. In particular, superconducting quantum circuits have successfully demonstrated many of the requirements for quantum computing, including coherence levels that approach the thresholds for scaling. However, it remains challenging to couple a large number of circuit components through controllable channels while suppressing any other interactions. We propose a hardware platform intended to address these challenges, which combines the advantages of integrated circuit fabrication and long coherence times achievable in three-dimensional circuit quantum electrodynamics (3D cQED). This multilayer microwave integrated quantum circuit (MMIQC) platform provides a path toward the realization of increasingly complex superconducting devices in pursuit of a scalable quantum computer. △ Less

Submitted 11 September, 2015; v1 submitted 3 September, 2015; originally announced September 2015.

Comments: 5 pages, 2 figures

Demonstration of superconducting micromachined cavities

Authors: T. Brecht, M. Reagor, Y. Chu, W. Pfaff, C. Wang, L. Frunzio, M. H. Devoret, R. J. Schoelkopf

Abstract: Superconducting enclosures will be key components of scalable quantum computing devices based on circuit quantum electrodynamics (cQED). Within a densely integrated device, they can protect qubits from noise and serve as quantum memory units. Whether constructed by machining bulk pieces of metal or microfabricating wafers, 3D enclosures are typically assembled from two or more parts. The resulting… ▽ More Superconducting enclosures will be key components of scalable quantum computing devices based on circuit quantum electrodynamics (cQED). Within a densely integrated device, they can protect qubits from noise and serve as quantum memory units. Whether constructed by machining bulk pieces of metal or microfabricating wafers, 3D enclosures are typically assembled from two or more parts. The resulting seams potentially dissipate crossing currents and limit performance. In this Letter, we present measured quality factors of superconducting cavity resonators of several materials, dimensions and seam locations. We observe that superconducting indium can be a low-loss RF conductor and form low-loss seams. Leveraging this, we create a superconducting micromachined resonator with indium that has a quality factor of two million despite a greatly reduced mode volume. Inter-layer coupling to this type of resonator is achieved by an aperture located under a planar transmission line. The described techniques demonstrate a proof-of-principle for multilayer microwave integrated quantum circuits for scalable quantum computing. △ Less

Submitted 11 September, 2015; v1 submitted 3 September, 2015; originally announced September 2015.

Comments: 6 pages, 5 figures

Measurement and Control of Quasiparticle Dynamics in a Superconducting Qubit

Authors: Chen Wang, Yvonne Y. Gao, Ioan M. Pop, Uri Vool, Chris Axline, Teresa Brecht, Reinier W. Heeres, Luigi Frunzio, Michel H. Devoret, Gianluigi Catelani, Leonid I. Glazman, Robert J. Schoelkopf

Abstract: Superconducting circuits have attracted growing interest in recent years as a promising candidate for fault-tolerant quantum information processing. Extensive efforts have always been taken to completely shield these circuits from external magnetic field to protect the integrity of superconductivity. Surprisingly, here we show vortices can improve the performance of superconducting qubits by reduc… ▽ More Superconducting circuits have attracted growing interest in recent years as a promising candidate for fault-tolerant quantum information processing. Extensive efforts have always been taken to completely shield these circuits from external magnetic field to protect the integrity of superconductivity. Surprisingly, here we show vortices can improve the performance of superconducting qubits by reducing the lifetimes of detrimental single-electron-like excitations known as quasiparticles. Using a contactless injection technique with unprecedented dynamic range, we quantitatively distinguish between recombination and trapping mechanisms in controlling the dynamics of residual quasiparticles, and show quantized changes in quasiparticle trapping rate due to individual vortices. These results highlight the prominent role of quasiparticle trapping in future development of superconducting qubits, and provide a powerful characterization tool along the way. △ Less

Submitted 24 October, 2014; v1 submitted 27 June, 2014; originally announced June 2014.

Comments: 8 pages with 4 figures for the main text, 13 pages with 11 figures for supplementary material

Journal ref: Nature Communications 5, 5836 (2014)

Non-Poissonian Quantum Jumps of a Fluxonium Qubit due to Quasiparticle Excitations

Authors: Uri Vool, Ioan M. Pop, Katrina Sliwa, Baleegh Abdo, Chen Wang, Teresa Brecht, Yvonne Y. Gao, Shyam Shankar, Michael Hatridge, Gianluigi Catelani, Mazyar Mirrahimi, Luigi Frunzio, Robert J. Schoelkopf, Leonid I. Glazman, Michel H. Devoret

Abstract: As the energy relaxation time of superconducting qubits steadily improves, non-equilibrium quasiparticle excitations above the superconducting gap emerge as an increasingly relevant limit for qubit coherence. We measure fluctuations in the number of quasiparticle excitations by continuously monitoring the spontaneous quantum jumps between the states of a fluxonium qubit, in conditions where relaxa… ▽ More As the energy relaxation time of superconducting qubits steadily improves, non-equilibrium quasiparticle excitations above the superconducting gap emerge as an increasingly relevant limit for qubit coherence. We measure fluctuations in the number of quasiparticle excitations by continuously monitoring the spontaneous quantum jumps between the states of a fluxonium qubit, in conditions where relaxation is dominated by quasiparticle loss. Resolution on the scale of a single quasiparticle is obtained by performing quantum non-demolition projective measurements within a time interval much shorter than $T_1$, using a quantum limited amplifier (Josephson Parametric Converter). The quantum jumps statistics switches between the expected Poisson distribution and a non-Poissonian one, indicating large relative fluctuations in the quasiparticle population, on time scales varying from seconds to hours. This dynamics can be modified controllably by injecting quasiparticles or by seeding quasiparticle-trapping vortices by cooling down in magnetic field. △ Less

Submitted 9 December, 2014; v1 submitted 6 June, 2014; originally announced June 2014.

Journal ref: Phys. Rev. Lett. 113, 247001 (2014)

Reaching 10 ms single photon lifetimes for superconducting aluminum cavities

Authors: M. Reagor, Hanhee Paik, G. Catelani, L. Sun, C. Axline, E. Holland, I. M. Pop, N. A. Masluk, T. Brecht, L. Frunzio, M. H. Devoret, L. I. Glazman, R. J. Schoelkopf

Abstract: Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics (cQED) architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>10^3) higher quality factors and longer lifetimes… ▽ More Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics (cQED) architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>10^3) higher quality factors and longer lifetimes should be achievable for 3D structures. Motivated by this principle, we have reached internal quality factors greater than 0.5x10^9 and intrinsic lifetimes of 0.01 seconds for multiple aluminum superconducting cavity resonators at single photon energies and millikelvin temperatures. These improvements could enable long lived quantum memories with submicrosecond access times when strongly coupled to superconducting qubits. △ Less

Submitted 22 May, 2013; v1 submitted 18 February, 2013; originally announced February 2013.

Comments: 4 pages, 2 figures

Journal ref: Appl. Phys. Lett. 102, 192604 (2013)