Showing 1–50 of 70 results for author: Bimonte, G

Measuring Casimir Force Across a Superconducting Transition

Authors: Minxing Xu, Robbie J. G. Elbertse, Ata Keşkekler, Giuseppe Bimonte, Jinwon Lee, Sander Otte, Richard A. Norte

Abstract: The Casimir effect and superconductivity are foundational quantum phenomena whose interaction remains an open question in physics. How Casimir forces behave across a superconducting transition remains unresolved, owing to the experimental difficulty of achieving alignment, cryogenic environments, and isolating small changes from competing effects. This question carries implications for electron ph… ▽ More The Casimir effect and superconductivity are foundational quantum phenomena whose interaction remains an open question in physics. How Casimir forces behave across a superconducting transition remains unresolved, owing to the experimental difficulty of achieving alignment, cryogenic environments, and isolating small changes from competing effects. This question carries implications for electron physics, quantum gravity, and high-temperature superconductivity. Here we demonstrate an on-chip superconducting platform that overcomes these challenges, achieving one of the most parallel Casimir configurations to date. Our microchip-based cavities achieve unprecedented area-to-separation ratio between plates, exceeding previous Casimir experiments by orders of magnitude and generating the strongest Casimir forces yet between compliant surfaces. Scanning tunneling microscopy (STM) is used for the first time to directly detect the resonant motion of a suspended membrane, with subatomic precision in both lateral positioning and displacement. Such precision measurements across a superconducting transition allow for the suppression of all van der Waals, electrostatic, and thermal effects. Preliminary measurements suggest superconductivity-dependent shifts in the Casimir force, motivating further investigation and comparison with theories. By uniting extreme parallelism, nanomechanics, and STM readout, our platform opens a new experimental frontier at the intersection of Casimir physics and superconductivity. △ Less

Submitted 14 April, 2025; originally announced April 2025.

Proposal to measure the Casimir Effect Across the Superconducting Transition

Authors: Giuseppe Bimonte

Abstract: The influence of the superconducting transition on the Casimir effect remains experimentally elusive. We propose a novel approach to address this challenge, exploiting the first-order superconducting transition induced in a thick film by a parallel magnetic field. Our calculations for a Au sphere opposite a Pb film, based on the Mattis-Bardeen theory, predict a jump in the Casimir force across the… ▽ More The influence of the superconducting transition on the Casimir effect remains experimentally elusive. We propose a novel approach to address this challenge, exploiting the first-order superconducting transition induced in a thick film by a parallel magnetic field. Our calculations for a Au sphere opposite a Pb film, based on the Mattis-Bardeen theory, predict a jump in the Casimir force across the transition. By periodically modulating the magnetic field, we induce a corresponding modulation of the Casimir force that should be readily detectable with existing micro-torsional oscillator technology, opening a promising pathway to finally observe the long-sought Casimir-superconductivity coupling. A successful measurement of this effect would provide crucial insights into the fundamental nature of the Casimir force and its interaction with macroscopic quantum phenomena. △ Less

Submitted 7 February, 2025; originally announced February 2025.

Comments: 5 pages, 4 encapsulated figures

Journal ref: Phys. Rev. B 111, 174512 (2025)

Casimir force inadequacy in explaining a strong attractive force in a micrometer-sized narrow-gap re-entrant cavity

Authors: Giuseppe Bimonte

Abstract: Pate et al. \cite{pate} investigated a macroscopic opto-mechanical system with a narrow-gap re-entrant cavity coupled to a SiN membrane resonator coated with Au or Nb. They observed a significant increase in the membrane's effective spring constant $k_{\rm eff}$ for sub-2-micron gaps $x$. This increase scales roughly with $x^{-4}$, suggesting an attractive force pulling the membrane towards the re… ▽ More Pate et al. \cite{pate} investigated a macroscopic opto-mechanical system with a narrow-gap re-entrant cavity coupled to a SiN membrane resonator coated with Au or Nb. They observed a significant increase in the membrane's effective spring constant $k_{\rm eff}$ for sub-2-micron gaps $x$. This increase scales roughly with $x^{-4}$, suggesting an attractive force pulling the membrane towards the re-entrant Al post, with an $x^{-3}$ dependence. Attributing this force solely to the thermal Casimir effect is challenged by our detailed calculations (presented below). These calculations reveal that the Casimir force, at the investigated gap sizes, is orders of magnitude weaker than the observed force. This significant discrepancy necessitates an alternative explanation for the observed attraction. △ Less

Submitted 6 February, 2025; originally announced February 2025.

Comments: 8 pages, 1 encapsulated figure

Surface Scattering Expansion of the Casimir-Polder Interaction for Magneto-dielectric Bodies: Convergence Properties for Insulators, Conductors and Semiconductors

Authors: G. Bimonte, T. Emig

Abstract: Fluctuation induced forces are a hallmark of the interplay of fluctuations and geometry. We recently proved the existence of a multi-parametric family of exact representations of Casimir and Casimir-Polder interactions between bodies of arbitrary shape and material composition, admitting a multiple scattering expansion (MSE) as a sequence of inter- and intra-body multiple wave scatterings [G. Bimo… ▽ More Fluctuation induced forces are a hallmark of the interplay of fluctuations and geometry. We recently proved the existence of a multi-parametric family of exact representations of Casimir and Casimir-Polder interactions between bodies of arbitrary shape and material composition, admitting a multiple scattering expansion (MSE) as a sequence of inter- and intra-body multiple wave scatterings [G. Bimonte, T. Emig, Phys. Rev. A 108, 052807 (2023)]. The approach requires no knowledge of the scattering amplitude (T-matrix) of the bodies. Here we investigate the convergence properties of the MSE for the Casimir-Polder interaction of a polarizable particle with a macroscopic body. We consider representative materials from different classes, such as insulators, conductors and semiconductors. Using a sphere and a cylinder as benchmarks, we demonstrate that the MSE can be used to efficiently and accurately compute the Casimir-Polder interaction for bodies with smooth surfaces. △ Less

Submitted 24 November, 2023; originally announced November 2023.

Comments: 13 pages, 5 figures

Casimir and Casimir-Polder Interactions for Magneto-dielectric Materials: Surface Scattering Expansion

Authors: Giuseppe Bimonte, Thorsten Emig

Abstract: We develop a general multiple scattering expansion (MSE) for computing Casimir forces between magneto-dielectric bodies and Casimir-Polder forces between polarizable particles and magneto-dielectric bodies. The approach is based on fluctuating electric and magnetic surface currents and charges. The surface integral equations for these surface fields can be formulated in terms of surface scattering… ▽ More We develop a general multiple scattering expansion (MSE) for computing Casimir forces between magneto-dielectric bodies and Casimir-Polder forces between polarizable particles and magneto-dielectric bodies. The approach is based on fluctuating electric and magnetic surface currents and charges. The surface integral equations for these surface fields can be formulated in terms of surface scattering operators (SSO). We show that there exists an entire family of such operators. One particular member of this family is only weakly divergent and allows for a MSE that appears to be convergent for general magneto-dielectric bodies. We proof a number of properties of this operator, and demonstrate explicitly convergence for sufficiently low and high frequencies, and for perfect conductors. General expressions are derived for the Casimir interaction between macroscopic bodies and for the Casimir-Polder interaction between particles and macroscopic bodies in terms of the SSO, both at zero and finite temperatures. An advantage of our approach above previous scattering methods is that it does not require the knowledge of the scattering amplitude (T-operator) of the bodies. A number of simple examples are provided to demonstrate the use of the method. Some applications of our approach have appeared previously [T. Emig, G. Bimonte, Phys. Rev. Lett. 130, 200401 (2023)]. Here we provide additional technical aspects and details of our approach. △ Less

Submitted 5 September, 2023; originally announced September 2023.

Comments: 48 pages, 5 figures. arXiv admin note: text overlap with arXiv:2211.05042

Multiple scattering expansion for dielectric media: Casimir effect

Authors: Thorsten Emig, Giuseppe Bimonte

Abstract: Recent measurements of Casimir forces have provided evidence of an intricate modification of quantum fluctuations of the electromagnetic field in complex geometries. Here we introduce a multiple scattering description for Casimir interactions between bodies of arbitrary shape and material composition, admitting an expansion as a sequence of inter- and intra-body wave scatterings. Interactions in c… ▽ More Recent measurements of Casimir forces have provided evidence of an intricate modification of quantum fluctuations of the electromagnetic field in complex geometries. Here we introduce a multiple scattering description for Casimir interactions between bodies of arbitrary shape and material composition, admitting an expansion as a sequence of inter- and intra-body wave scatterings. Interactions in complex geometries can be computed within the current experimental resolution from typically a few wave scatterings, notably without any a priori knowledge of the scattering amplitudes of the bodies. Some first applications demonstrate the power of the approach. △ Less

Submitted 19 May, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Comments: 6 pages, 4 figures

Journal ref: Physical Review Letters 130, 200401 (2023)

Something Can Come of Nothing: Surface Approaches to Quantum Fluctuations and the Casimir Force

Authors: Giuseppe Bimonte, Thorsten Emig, Noah Graham, Mehran Kardar

Abstract: The Casimir force provides a striking example of the effects of quantum fluctuations in a mesoscopic system. Because it arises from the objects' electromagnetic response, the necessary calculations in quantum field theory are most naturally expressed in terms of electromagnetic scattering from each object. In this review we illustrate a variety of such techniques, with a focus on those that can be… ▽ More The Casimir force provides a striking example of the effects of quantum fluctuations in a mesoscopic system. Because it arises from the objects' electromagnetic response, the necessary calculations in quantum field theory are most naturally expressed in terms of electromagnetic scattering from each object. In this review we illustrate a variety of such techniques, with a focus on those that can be expressed in terms of surface effects, including both idealized boundary conditions and their physical realization in terms of material properties. △ Less

Submitted 7 September, 2022; v1 submitted 10 February, 2022; originally announced February 2022.

Comments: 29 pages, 2 figures; invited contribution to Annual Reviews in Nuclear and Particle Science; v2: minor editing of version for publication

Journal ref: Annual Review of Nuclear and Particle Science 2022 72:1, 93-118

Unifying Theory for Casimir Forces: Bulk and Surface Formulations

Authors: Giuseppe Bimonte, Thorsten Emig

Abstract: The principles of the electromagnetic fluctuation-induced phenomena such as Casimir forces are well understood. However, recent experimental advances require universal and efficient methods to compute these forces. While several approaches have been proposed in the literature, their connection is often not entirely clear, and some of them have been introduced as purely numerical techniques. Here w… ▽ More The principles of the electromagnetic fluctuation-induced phenomena such as Casimir forces are well understood. However, recent experimental advances require universal and efficient methods to compute these forces. While several approaches have been proposed in the literature, their connection is often not entirely clear, and some of them have been introduced as purely numerical techniques. Here we present a unifying approach for the Casimir force and free energy that builds on both the Maxwell stress tensor and path integral quantization. The result is presented in terms of either bulk or surface operators that describe corresponding current fluctuations. Our surface approach yields a novel formula for the Casimir free energy. The path integral is presented both within a Lagrange and Hamiltonian formulation yielding different surface operators and expressions for the free energy that are equivalent. We compare our approaches to previously developed numerical methods and the scattering approach. The practical application of our methods is exemplified by the derivation of the Lifshitz formula. △ Less

Submitted 16 August, 2021; originally announced August 2021.

Comments: 37 pages, 2 figures

Journal ref: Universe 2021, 7(7), 225

Casimir-Polder shift of ground-state hyperfine Zeeman sub-levels of hydrogen isotopes in a micron-sized metallic cavity at finite temperature

Authors: Davide Iacobacci, Giuseppe Bimonte, Thorsten Emig

Abstract: The frequencies of transitions between hyperfine levels of ground-state atoms can be measured with exquisite precision using magnetic-resonance techniques. This makes hyperfine transitions ideal probes of QED effects originating from the interaction of atoms with the quantized electromagnetic field. One of the most remarkable effects predicted by QED is the Casimir-Polder shift experienced by the… ▽ More The frequencies of transitions between hyperfine levels of ground-state atoms can be measured with exquisite precision using magnetic-resonance techniques. This makes hyperfine transitions ideal probes of QED effects originating from the interaction of atoms with the quantized electromagnetic field. One of the most remarkable effects predicted by QED is the Casimir-Polder shift experienced by the energy levels of atoms placed near one or more dielectric objects. Here we compute the Casimir-Polder shift and the width of hyperfine transitions between ground-state Zeeman sub-levels of an hydrogen atom placed in a micron-sized metallic cavity, over a range of temperatures extending from cryogenic temperatures to room temperature. Results are presented also for deuterium and tritium. We predict shifts of the hyperfine transitions frequencies of a few tens of Hz that might be measurable with present-day magnetic resonance apparatus. △ Less

Submitted 8 June, 2021; originally announced June 2021.

Comments: 16 pages, 9 encapsulated figures. Accepted for publication in Phys. Rev. A

Journal ref: Phys. Rev. A 103, 062811 (2021)

Measurement of the Casimir Force between 0.2 and 8 mum: Experimental Procedures and Comparison with Theory

Authors: Giuseppe Bimonte, Benjamin Spreng, Paulo A. Maia Neto, Gert-Ludwig Ingold, Galina L. Klimchitskaya, Vladimir M. Mostepanenko, Ricardo S. Decca

Abstract: We present results on the determination of the differential Casimir force between an Au-coated sapphire sphere and the top and bottom of Au-coated deep silicon trenches performed by means of the micromechanical torsional oscillator in the range of separations from 0.2 to 8 $\upmu$m. The random and systematic errors in the measured force signal are determined at the 95\% confidence level and combin… ▽ More We present results on the determination of the differential Casimir force between an Au-coated sapphire sphere and the top and bottom of Au-coated deep silicon trenches performed by means of the micromechanical torsional oscillator in the range of separations from 0.2 to 8 $\upmu$m. The random and systematic errors in the measured force signal are determined at the 95\% confidence level and combined into the total experimental error. The role of surface roughness and edge effects is investigated and shown to be negligibly small. The distribution of patch potentials is characterized by Kelvin probe microscopy, yielding an estimate of the typical size of patches, the respective r.m.s. voltage and their impact on the measured force. A comparison between the experimental results and theory is performed with no fitting parameters. For this purpose, the Casimir force in the sphere-plate geometry is computed independently on the basis of first principles of quantum electrodynamics using the scattering theory and the gradient expansion. In doing so, the frequency-dependent dielectric permittivity of Au is found from the optical data extrapolated to zero frequency by means of the plasma and Drude models. It is shown that the measurement results exclude the Drude model extrapolation over the region of separations from 0.2 to 4.8~$\upmu$m, whereas the alternative extrapolation by means of the plasma model is experimentally consistent over the entire measurement range. A discussion of the obtained results is provided. △ Less

Submitted 8 April, 2021; originally announced April 2021.

Comments: 36 pages, 16 figures

Journal ref: Universe, vol.7, N4, 93 (2021)

Probing the non-Planckian spectrum of thermal radiation in a micron-sized cavity with a spin-polarized atomic beam

Authors: Giuseppe Bimonte

Abstract: It is commonly thought that thermal photons with transverse electric polarization cannot exist in a planar metallic cavity whose size $a$ is smaller than the thermal wavelength $λ_T$, due to absence of modes with $λ< 2a$. Computations based on a realistic model of the mirrors contradict this expectation, and show that a micron-sized metallic cavity is filled with non-resonant radiation having tran… ▽ More It is commonly thought that thermal photons with transverse electric polarization cannot exist in a planar metallic cavity whose size $a$ is smaller than the thermal wavelength $λ_T$, due to absence of modes with $λ< 2a$. Computations based on a realistic model of the mirrors contradict this expectation, and show that a micron-sized metallic cavity is filled with non-resonant radiation having transverse electric polarization, following a non-Planckian spectrum, whose average density at room temperature is orders of magnitudes larger than that of a black-body. We show that the spectrum of this radiation can be measured by observing the transition rates between hyperfine ground-state sub-levels $1S_{1/2}(F,m_F) \rightarrow 1S_{1/2}(F',m'_F)$ of D atoms passing in the gap between the mirrors of a Au cavity. Such a measurement would also shed light on a puzzle in the field of dispersion forces, regarding the sign and magnitude of the thermal Casimir force. Recent experiments with Au surfaces led to contradictory results, whose interpretation is much controversial. △ Less

Submitted 23 August, 2019; originally announced August 2019.

Comments: 11 pages, 9 figures. Accepted for publication in Phys. Rev. A

Apparatus to probe the influence on the Casimir effect of the Mott-Anderson metal-insulator transition in doped semiconductors

Authors: Giuseppe Bimonte

Abstract: We describe an isoelectronic differential apparatus designed to observe the influence on the Casimir force of the Mott-Anderson metal-insulator transition in doped semiconductors. Alternative theories of dispersion forces lead to different predictions for this effect. The investigation of this problem by standard apparatus, based on absolute measurements of the Casimir force, is very difficult bec… ▽ More We describe an isoelectronic differential apparatus designed to observe the influence on the Casimir force of the Mott-Anderson metal-insulator transition in doped semiconductors. Alternative theories of dispersion forces lead to different predictions for this effect. The investigation of this problem by standard apparatus, based on absolute measurements of the Casimir force, is very difficult because the effect is small in the region of sub-micron separations, where the Casimir force can be measured precisely. The differential apparatus described here is immune by design to several sources of error that blur the interpretation of Casimir experiments, like electrostatic patches, inaccurate determination of plates separation, surface roughness and errors in the optical data. With the help of the proposed setup it should be possible to establish conclusively which among the alternative theories of the Casimir effect for semiconducting test bodies is correct. △ Less

Submitted 25 April, 2019; originally announced April 2019.

Comments: 14 pages, 9 figures, accepted for publication in Phys. Rev. A

Journal ref: Phys. Rev. A 99, 052506 (2019)

On the Casimir effect between superconductors

Authors: Giuseppe Bimonte

Abstract: A recent experiment [R. A. Norte et al. Phys. Rev. Lett. {\bf 121}, 030405 (2018)] probed the variation of the Casimir force between two closely spaced thin Al films, as they transition into a superconducting state, observing a null result. We present here computations of the Casimir effect for superconductors, based on the Mattis-Bardeen formula for their optical response. We show that for the Al… ▽ More A recent experiment [R. A. Norte et al. Phys. Rev. Lett. {\bf 121}, 030405 (2018)] probed the variation of the Casimir force between two closely spaced thin Al films, as they transition into a superconducting state, observing a null result. We present here computations of the Casimir effect for superconductors, based on the Mattis-Bardeen formula for their optical response. We show that for the Al cavity used in the experiment the effect of the transition is over two hundred and fifty times smaller than the experimental sensitivity, in agreement with the observed null result. We demonstrate that a large enhancement of the effect can be achieved by using a cavity consisting of a Au mirror and a superconducting NbTiN film. We estimate that the effect of the superconducting transition would be observable with the proposed Au-NbTiN configuration, if the sensitivity of the apparatus could be increased by an order of magnitude. △ Less

Submitted 25 February, 2019; originally announced February 2019.

Comments: 9 pages, 10 figures

Journal ref: Phys. Rev. A 99, 052507 (2019)

Beyond-proximity-force-approximation Casimir force between two spheres at finite temperature II: plasma versus Drude modeling, grounded versus isolated spheres

Authors: Giuseppe Bimonte

Abstract: A recent experiment [J. L. Garrett, D. A. T. Somers, and J. N. Munday, Phys. Rev. Lett {\bf 120}, 040401 (2018)] measured for the first time the gradient of the Casimir force between two gold spheres in vacuum at room temperature, and placed a bound on the magnitude of the deviation of the measured force from the proximity force approximation (PFA). The present work extends a previous theoretical… ▽ More A recent experiment [J. L. Garrett, D. A. T. Somers, and J. N. Munday, Phys. Rev. Lett {\bf 120}, 040401 (2018)] measured for the first time the gradient of the Casimir force between two gold spheres in vacuum at room temperature, and placed a bound on the magnitude of the deviation of the measured force from the proximity force approximation (PFA). The present work extends a previous theoretical analysis of this experiment [G. Bimonte, Phys. Rev. D {\bf 97}, 085011 (2018)], by analyzing in detail how the magnitude of the deviation from PFA is affected by the inclusion or neglect of ohmic dissipation at zero frequency, a much debated issue in the current Casimir literature, which goes by the name of the Drude vs plasma controversy. We analyze as well the effect of connecting the plates to charge reservoirs, which is the standard configuration used in Casimir experiments. We describe a simple and effective decimation procedure, allowing for a faster computation of the Casimir force for large aspect ratios of the system. △ Less

Submitted 1 November, 2018; v1 submitted 19 April, 2018; originally announced April 2018.

Comments: 18 pages, 11 figures, slight change in the title, some typos corrected, minor changes in the text. Version accepted for publication in Phys. Rev. D

Journal ref: Phys. Rev. D 98, 105004 (2018)

Beyond-PFA Casimir Force between two spheres at finite temperature

Authors: Giuseppe Bimonte

Abstract: A recent experiment [J.L. Garrett et al., Phys. Rev. Lett {\bf 120}, 040401 (2018)] measured for the first time the gradient of the Casimir force between two gold spheres at room temperature. The theoretical analysis of the data was carried out using the standard Proximity Force Approximation (PFA). A fit of the data, using a parametrization of the force valid for the sphere-plate geometry, was us… ▽ More A recent experiment [J.L. Garrett et al., Phys. Rev. Lett {\bf 120}, 040401 (2018)] measured for the first time the gradient of the Casimir force between two gold spheres at room temperature. The theoretical analysis of the data was carried out using the standard Proximity Force Approximation (PFA). A fit of the data, using a parametrization of the force valid for the sphere-plate geometry, was used by the authors to place a bound on deviations from PFA. Motivated by this work, we compute the Casimir force between two gold spheres at finite temperature. The semi-analytic formula for the Casimir force that we construct is valid for all separations, and can be easily used to interpret future experiments in both the sphere-plate and sphere-sphere configurations. We describe the correct parametrization of the corrections to PFA for two spheres that should be used in data analysis. △ Less

Submitted 16 February, 2018; v1 submitted 5 February, 2018; originally announced February 2018.

Comments: 11 pages, 3 figures, an error in Eq. (8) has been corrected

Journal ref: Phys. Rev. D 97, 085011 (2018)

Thermal effect in the Casimir force for graphene and graphene-coated substrates: Impact of nonzero mass gap and chemical potential

Authors: G. Bimonte, G. L. Klimchitskaya, V. M. Mostepanenko

Abstract: The rigorous finite-temperature QED formalism of the polarization tensor is used to study the combined effect of nonzero mass gap $m$ and chemical potential $μ$ on the Casimir force and its thermal correction in the experimentally relevant configuration of a Au sphere interacting with a real graphene sheet or with graphene-coated dielectric substrates made of different materials. It is shown that… ▽ More The rigorous finite-temperature QED formalism of the polarization tensor is used to study the combined effect of nonzero mass gap $m$ and chemical potential $μ$ on the Casimir force and its thermal correction in the experimentally relevant configuration of a Au sphere interacting with a real graphene sheet or with graphene-coated dielectric substrates made of different materials. It is shown that for both a free-standing graphene sheet and for graphene-coated substrates the magnitude of the Casimir force decreases as $m$ is increased, while it increases as $μ$ is increased, indicating that these parameters act in opposite directions. According to our results, the impact of $m$ and/or $μ$ on the Casimir force for graphene-coated plates is much smaller than for a free-standing graphene sheet. Furthermore, computations show that the Casimir force is much stronger for graphene-coated substrates than for a free-standing graphene sample, but the thermal correction and its fractional weight in the total force are smaller in the former case. These results are applied to a differential setup that was recently proposed to observe the giant thermal effect in the Casimir force for graphene. We show that this experiment remains feasible even after taking into account the influence of the nonzero mass-gap and chemical potential of real graphene samples. Possible further applications of the obtained results are discussed. △ Less

Submitted 8 September, 2017; originally announced September 2017.

Comments: 27 pages, 8 figures; accepted for publication in Phys. Rev. B

Journal ref: Phys. Rev. B, v.96, 115430 (2017)

How to observe the giant thermal effect in the Casimir force for graphene systems

Authors: G. Bimonte, G. L. Klimchitskaya, V. M. Mostepanenko

Abstract: A differential measurement scheme is proposed which allows for a clear observation of the giant thermal effect for the Casimir force, that was recently predicted to occur in graphene systems at short separation distances. The difference among the Casimir forces acting between a metal-coated sphere and the two halves of a dielectric plate, one uncoated and the other coated with graphene, is calcula… ▽ More A differential measurement scheme is proposed which allows for a clear observation of the giant thermal effect for the Casimir force, that was recently predicted to occur in graphene systems at short separation distances. The difference among the Casimir forces acting between a metal-coated sphere and the two halves of a dielectric plate, one uncoated and the other coated with graphene, is calculated in the framework of the Dirac model using the rigorous formalism of the polarization tensor. It is shown that in the proposed configuration both the difference among the Casimir forces and its thermal contributioncan be easily measured using already existing experimental setups. An observation of the giant thermal effect should open opportunities for modulation and control of dispersion forces in micromechanical systems based on graphene and other novel 2D-materials. △ Less

Submitted 7 July, 2017; originally announced July 2017.

Comments: 13 pages, 3 figures; accepted for publication in Phys. Rev. A

Journal ref: Phys. Rev. A, v.96, 012517-(1--6) (2017); Editors' Suggestion

Going beyond PFA: a precise formula for the sphere-plate Casimir force

Authors: Giuseppe Bimonte

Abstract: Quantum fluctuations of the electromagnetic field in the medium surrounding two discharged macroscopic polarizable bodies induce a force between the two bodies, the so called Casimir force. In the last two decades many experiments have accurately measured this force, and significant efforts are made to harness it in the actuation of micro and nano machines. The inherent many body character of the… ▽ More Quantum fluctuations of the electromagnetic field in the medium surrounding two discharged macroscopic polarizable bodies induce a force between the two bodies, the so called Casimir force. In the last two decades many experiments have accurately measured this force, and significant efforts are made to harness it in the actuation of micro and nano machines. The inherent many body character of the Casimir force makes its computation very difficult in non-planar geometries, like the standard experimental sphere-plate configuration. Here we derive an approximate semi-analytic formula for the sphere-plate Casimir force, which is both easy to compute numerically and very accurate at all distances. By a comparison with the fully converged exact scattering formula, we show that the error made by the approximate formula is indeed much smaller than the uncertainty of present and foreseeable Casimir experiments. △ Less

Submitted 7 June, 2017; v1 submitted 12 May, 2017; originally announced May 2017.

Comments: 7 pages, 3 encapsulated figures, final version accepted for publication in EPL. Note the change in the title

Universal experimental test for the role of free charge carriers in thermal Casimir effect within a micrometer separation range

Authors: G. Bimonte, G. L. Klimchitskaya, V. M. Mostepanenko

Abstract: We propose a universal experiment to measure the differential Casimir force between a Au-coated sphere and two halves of a structured plate covered with a P-doped Si overlayer. The concentration of free charge carriers in the overlayer is chosen slightly below the critical one, f or which the phase transition from dielectric to metal occurs. One ha f of the structured plate is insulating, while it… ▽ More We propose a universal experiment to measure the differential Casimir force between a Au-coated sphere and two halves of a structured plate covered with a P-doped Si overlayer. The concentration of free charge carriers in the overlayer is chosen slightly below the critical one, f or which the phase transition from dielectric to metal occurs. One ha f of the structured plate is insulating, while its second half is made of gold. For the former we consider two different structures, one consisting of bulk high-resistivity Si and the other of a layer of silica followed by bulk high-resistivity Si. The differential Casimir force is computed within the Lifshitz theory using four approaches that have been proposed in the literature to account for the role of free charge carriers in metallic and dielectric materials interacting with quantum fluctuations. According to these approaches, Au at low frequencies is described by either the Drude or the plasma model, whereas the free charge carriers in dielectric materials at room temperature are either taken into account or disregarded. It is shown that the values of differential Casimir forces, computed in the micrometer separation range using these four approaches, are widely distinct from each other and can be easily discriminated experimentally. It is shown that for all approaches the thermal component of the differential Casimir force is sufficiently large for direct observation. The possible errors and uncertainties in the proposed experiment are estimated and its importance for the theory of quantum fluctuations is discussed. △ Less

Submitted 10 May, 2017; v1 submitted 9 May, 2017; originally announced May 2017.

Comments: 26 pages, 1 table, 8 figures; Phys. Rev. A, accepted for publication. Figure 5 is corrected

Journal ref: Phys. Rev. A 95, 052508 (2017)

Classical Casimir interaction of perfectly conducting sphere and plate

Authors: Giuseppe Bimonte

Abstract: We study the Casimir interaction between perfectly conducting sphere and plate in the classical limit of high temperatures. By taking the small-distance expansion of the exact scattering formula, we compute the leading correction to the Casimir energy beyond the commonly employed proximity force approximation. We find that for a sphere of radius $R$ at distance $d$ from the plate the correction is… ▽ More We study the Casimir interaction between perfectly conducting sphere and plate in the classical limit of high temperatures. By taking the small-distance expansion of the exact scattering formula, we compute the leading correction to the Casimir energy beyond the commonly employed proximity force approximation. We find that for a sphere of radius $R$ at distance $d$ from the plate the correction is of the form $\ln^2 (d/R)$, in agreement with indications from recent large-scale numerical computations. We develop a fast-converging numerical scheme for computing the Casimir interaction to high precision, based on bispherical partial waves, and we verify that the short-distance formula provides precise values of the Casimir energy also for fairly large distances. △ Less

Submitted 23 February, 2017; v1 submitted 23 January, 2017; originally announced January 2017.

Comments: 10 pages, 3 figures. Version accepted for publication in Phys. Rev. D

Journal ref: Phys. Rev. D 95, 065004 (2017)

Exact Casimir interaction of perfectly conducting three-spheres in four euclidean dimensions

Authors: Giuseppe Bimonte

Abstract: Exploiting conformal symmetry, we derive a simple exact formula for the classical electromagnetic Casimir interaction of two perfectly conducting three-spheres, including the sphere-plate geometry as a special case, in four euclidean dimensions. We verify that the short distance expansion of the Casimir energy agrees to leading order with the Proximity Force Approximation (PFA), while the next-to-… ▽ More Exploiting conformal symmetry, we derive a simple exact formula for the classical electromagnetic Casimir interaction of two perfectly conducting three-spheres, including the sphere-plate geometry as a special case, in four euclidean dimensions. We verify that the short distance expansion of the Casimir energy agrees to leading order with the Proximity Force Approximation (PFA), while the next-to-leading-order is in agreement with a recently proposed derivative expansion of the Casimir energy. At the next-to-next-to-leading order we find a non-analytic correction to PFA, which for a sphere-plate system is of the order of $(d/R)^{3/2} \log(d/R)$, where $d$ is the separation and $R$ the sphere radius. △ Less

Submitted 11 July, 2016; originally announced July 2016.

Comments: 19 pages, 2 figures

Journal ref: Phys. ReV. D 94, 085021 (2016)

Wave-scattering from a gently curved surface

Authors: Giuseppe Bimonte

Abstract: We study wave scattering from a gently curved surface. We show that the recursive relations, implied by shift invariance, among the coefficients of the perturbative series for the scattering amplitude allow to perform an infinite resummation of the perturbative series to all orders in the amplitude of the corrugation. The resummed series provides a derivative expansion of the scattering amplitude… ▽ More We study wave scattering from a gently curved surface. We show that the recursive relations, implied by shift invariance, among the coefficients of the perturbative series for the scattering amplitude allow to perform an infinite resummation of the perturbative series to all orders in the amplitude of the corrugation. The resummed series provides a derivative expansion of the scattering amplitude in powers of derivatives of the height profile, which is expected to become exact in the limit of quasi-specular scattering. We discuss the relation of our results with the so-called small-slope approximation introduced some time ago by Voronovich. △ Less

Submitted 24 June, 2016; originally announced June 2016.

Comments: 5 pages, accepted for publication in Phys. Lett. B

Journal ref: Phys. Lett. B 760 (2016) 149-152

Spectroscopic Probe of the van der Waals Interaction between Polar Molecules and a Curved Surface

Authors: Giuseppe Bimonte, Thorsten Emig, Robert L. Jaffe, Mehran Kardar

Abstract: We study the shift of rotational levels of a diatomic polar molecule due to its van der Waals (vdW) interaction with a gently curved dielectric surface at temperature $T$, and submicron separations. The molecule is assumed to be in its electronic and vibrational ground state, and the rotational degrees are described by a rigid rotor model. We show that under these conditions retardation effects an… ▽ More We study the shift of rotational levels of a diatomic polar molecule due to its van der Waals (vdW) interaction with a gently curved dielectric surface at temperature $T$, and submicron separations. The molecule is assumed to be in its electronic and vibrational ground state, and the rotational degrees are described by a rigid rotor model. We show that under these conditions retardation effects and surface dispersion can be neglected. The level shifts are found to be independent of $T$, and given by the quantum state averaged classical electrostatic interaction of the dipole with its image on the surface. We use a derivative expansion for the static Green's function to express the shifts in terms of surface curvature. We argue that the curvature induced line splitting is experimentally observable, and not obscured by natural line widths and thermal broadening. △ Less

Submitted 30 July, 2016; v1 submitted 15 June, 2016; originally announced June 2016.

Comments: 8 pages, 2 figures, version accepted for publication in Phys. Rev. A

Journal ref: Phys. Rev. A 94, 022509 (2016)

Non-equilibrium Fluctuational Quantum Electrodynamics: Heat Radiation, Heat Transfer, and Force

Authors: G. Bimonte, T. Emig, M. Kardar, M. Krüger

Abstract: Quantum and thermal fluctuations of electromagnetic waves are the cornerstone of quantum and statistical physics, and inherent to such phenomena as thermal radiation and van der Waals forces. While the basic principles are the material of elementary texts, recent experimental and technological advances have made it necessary to come to terms with counterintuitive consequences of electromagnetic fl… ▽ More Quantum and thermal fluctuations of electromagnetic waves are the cornerstone of quantum and statistical physics, and inherent to such phenomena as thermal radiation and van der Waals forces. While the basic principles are the material of elementary texts, recent experimental and technological advances have made it necessary to come to terms with counterintuitive consequences of electromagnetic fluctuations at short scales -- in the so called {\it near-field} regime. We focus on three manifestations of such behavior: {\bf (i)} The Stefan--Boltzmann law describes thermal radiation from macroscopic bodies, but fails to account for magnitude, polarization and coherence of radiation from small objects (say compared to the skin depth). {\bf (ii)} The heat transfer between two bodies at similar close proximity is dominated by evanescent waves, and can be several orders of magnitude larger than the classical contribution due to propagating waves. {\bf (iii)} Casimir/van der Waals interactions are a dominant force between objects at sub-micron separation; the non-equilibrium analogs of this force (for objects at different temperatures) have not been sufficiently explored (at least experimentally). To explore these phenomena we introduce the tool of fluctuational quantum electrodynamics (QED) originally introduced by Rytov in the 1950s. Combined with a scattering formalism, this enables studies of heat radiation and transfer, equilibrium and non-equilibrium forces for objects of different material properties, shapes, separations and arrangements. △ Less

Submitted 12 June, 2016; originally announced June 2016.

Comments: accepted for publication in Annual Reviews of Condensed Matter Physics

Isoelectronic determination of the thermal Casimir force

Authors: G. Bimonte, D. Lopez, R. S. Decca

Abstract: Differential force measurements between spheres coated with either nickel or gold and rotating disks with periodic distributions of nickel and gold are reported. The rotating samples are covered by a thin layer of titanium and a layer of gold. While titanium is used for fabrication purposes, the gold layer (nominal thicknesses of 21, 37, 47 and 87 nm) provides an isoelectronic environment, and is… ▽ More Differential force measurements between spheres coated with either nickel or gold and rotating disks with periodic distributions of nickel and gold are reported. The rotating samples are covered by a thin layer of titanium and a layer of gold. While titanium is used for fabrication purposes, the gold layer (nominal thicknesses of 21, 37, 47 and 87 nm) provides an isoelectronic environment, and is used to nullify the electrostatic contribution but allow the passage of long wavelength Casimir photons. A direct comparison between the experimental results and predictions from Drude and plasma models for the electrical permittivity is carried out. In the models the magnetic permeability of nickel is allowed to change to investigate its effects. Possible sources of errors, both in the experimental and theoretical sides, are taken into account. It is found that a Drude response with magnetic properties of nickel taken into account is unequivocally ruled out. The full analysis of the data indicates that a dielectric plasma response with magnetic properties of Ni included shows good agreement with the data. Neither a Drude nor a plasma dielectric response provide a satisfactory description if the magnetic properties of nickel are disregarded. △ Less

Submitted 13 May, 2016; v1 submitted 17 September, 2015; originally announced September 2015.

Comments: 16 pages, 15 figures. Extended version accepted in Physical Review B

Journal ref: Phys. Rev. B 93, 184434 (2016)

Casimir--Polder force between anisotropic nanoparticles and gently curved surfaces

Authors: Giuseppe Bimonte, Thorsten Emig, Mehran Kardar

Abstract: The Casimir--Polder interaction between an anisotropic particle and a surface is orientation dependent. We study novel orientational effects that arise due to curvature of the surface for distances much smaller than the radii of curvature by employing a derivative expansion. For nanoparticles we derive a general short distance expansion of the interaction potential in terms of their dipolar polari… ▽ More The Casimir--Polder interaction between an anisotropic particle and a surface is orientation dependent. We study novel orientational effects that arise due to curvature of the surface for distances much smaller than the radii of curvature by employing a derivative expansion. For nanoparticles we derive a general short distance expansion of the interaction potential in terms of their dipolar polarizabilities. Explicit results are presented for nano-spheroids made of SiO$_2$ and gold, both at zero and at finite temperatures. The preferred orientation of the particle is strongly dependent on curvature, temperature, as well as material properties. △ Less

Submitted 10 June, 2015; originally announced June 2015.

Comments: 9 pages, 10 encapsulated figures

Journal ref: Phys. Rev. D 92, 025028 (2015)

Observing the Casimir-Lifshitz Force Out of Thermal Equilibrium

Authors: Giuseppe Bimonte

Abstract: The thermal Casimir-Lifshitz force among two bodies held at different temperatures displays striking features that are absent in systems in thermal equilibrium. The manifestation of this force has been observed so far only in Bose-Einstein condensates close to a heated substrate, but never between two macroscopic bodies. Observation of the thermal Casimir-Lifhitz force out of thermal equilibrium w… ▽ More The thermal Casimir-Lifshitz force among two bodies held at different temperatures displays striking features that are absent in systems in thermal equilibrium. The manifestation of this force has been observed so far only in Bose-Einstein condensates close to a heated substrate, but never between two macroscopic bodies. Observation of the thermal Casimir-Lifhitz force out of thermal equilibrium with conventional Casimir setups is very difficult, because for experimentally accessible separations the thermal force is small compared to the zero-temperature quantum Casimir force, unless prohibitively large temperature differences among the plates are considered. We describe an apparatus that allows for a direct observation of the thermal force out of equilibrium for submicron separations and for moderate temperature differences between the plates. △ Less

Submitted 7 April, 2015; originally announced April 2015.

Comments: 5 pages, 3 encapsulated figures

Journal ref: Phys. Rev. A 92, 032116 (2015)

Isolelectronic apparatus to probe the thermal Casimir force

Authors: Giuseppe Bimonte

Abstract: Isoelectronic differential force measurements provide a unique opportunity to probe controversial features of the thermal Casimir effect, that are still much debated in the current literature. Isolectronic setups offer two major advantages over conventional Casimir setups. On one hand they are immune from electrostatic forces caused by potential patches on the plates surfaces, that plague present… ▽ More Isoelectronic differential force measurements provide a unique opportunity to probe controversial features of the thermal Casimir effect, that are still much debated in the current literature. Isolectronic setups offer two major advantages over conventional Casimir setups. On one hand they are immune from electrostatic forces caused by potential patches on the plates surfaces, that plague present Casimir experiments especially for separations in the micron range. On the other hand they can strongly enhance the discrepancy between alternative theoretical models that have been proposed to estimate the thermal Casimir force for metallic and magnetic surfaces. Thanks to these two features, isoelectronic differential experiments should allow to establish conclusively which among these models correctly describes the thermal Casimir force. △ Less

Submitted 16 March, 2015; originally announced March 2015.

Comments: 10 pages, 8 encapsulated figures. arXiv admin note: text overlap with arXiv:1410.4476

Journal ref: Phys. Rev. B 91, 205443 (2015)

Interplay of curvature and temperature in the Casimir-Polder interaction

Authors: Giuseppe Bimonte, Thorsten Emig

Abstract: We study the Casimir-Polder interaction at finite temperatures between a polarizable small, anisotropic particle and a non-planar surface using a derivative expansion. We obtain the leading and the next-to-leading curvature corrections to the interaction for low and high temperatures. Explicit results are provided for the retarded limit in the presence of a perfectly conducting surface. We study the Casimir-Polder interaction at finite temperatures between a polarizable small, anisotropic particle and a non-planar surface using a derivative expansion. We obtain the leading and the next-to-leading curvature corrections to the interaction for low and high temperatures. Explicit results are provided for the retarded limit in the presence of a perfectly conducting surface. △ Less

Submitted 29 October, 2014; originally announced October 2014.

Comments: 6 pages, 4 encapsulated figures, invited contribution to a special issue on Casimir Forces to be published by J. Phys. Cond. Matt

Journal ref: J. Phys.: Condens. Matter 27 (2015) 214018

Apparatus for measuring the thermal Casimir force at large distances

Authors: Giuseppe Bimonte

Abstract: We describe a Casimir apparatus based on a differential force measurement between a Au-coated sphere and a planar slab divided in two regions, one of which is made of high-resistivity (dielectric) Si, and the other of Au. The crucial feature of the setup is a semi-transparent plane parallel conducting over-layer, covering both regions. The setup offers two important advantages over existing Casimi… ▽ More We describe a Casimir apparatus based on a differential force measurement between a Au-coated sphere and a planar slab divided in two regions, one of which is made of high-resistivity (dielectric) Si, and the other of Au. The crucial feature of the setup is a semi-transparent plane parallel conducting over-layer, covering both regions. The setup offers two important advantages over existing Casimir setups. On one hand it leads to a large amplification of the difference between the Drude and the plasma prescriptions that are currently used to compute the thermal Casimir force. On the other hand, thanks to the screening power of the over-layer, it is in principle immune from electrostatic forces caused by potential patches on the plates surfaces, that plague present large distance Casimir experiments. If a semi-transparent conductive over-layer with identical patch structure over the Au-Si regions of the plate can be manufactured, similar to the opaque over-layers used in recent searches of non-newtonian gravitational forces based on the isoelectronic technique, the way will be paved for a clear observation of the thermal Casimir force up to separations of several microns, and an unambiguous discrimination between the Drude and the plasma prescriptions. △ Less

Submitted 12 November, 2014; v1 submitted 16 October, 2014; originally announced October 2014.

Comments: 5 pages, 3 encapsulated figures. Revised version accepted for publication in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 113, 240405 (2014)

A robust superconducting setup to probe the thermal Casimir effect

Authors: Giuseppe Bimonte

Abstract: We describe a superconducting Casimir apparatus inspired by a recently proposed setup involving magnetic surfaces [G. Bimonte, Phys. Rev. Lett. {\bf 112}, 240401 (2014)]. The present setup consists of a superconducting Nb sphere and a flat gold plate including in its interior a superconducting Nb strip. The experimental scheme involves a differential measurement of the Casimir force at a point of… ▽ More We describe a superconducting Casimir apparatus inspired by a recently proposed setup involving magnetic surfaces [G. Bimonte, Phys. Rev. Lett. {\bf 112}, 240401 (2014)]. The present setup consists of a superconducting Nb sphere and a flat gold plate including in its interior a superconducting Nb strip. The experimental scheme involves a differential measurement of the Casimir force at a point of the gold plate above the Nb strip and away from from it. We show that similar to the previous setup, the superconducting system considered here implies widely different modulations of the Casimir force, depending on whether the thermal force is computed using the Drude or the plasma model, thus paving the way to an unambiguous discrimination between these alternative prescriptions. △ Less

Submitted 29 September, 2014; originally announced September 2014.

Comments: 9 pages, 4 figures, invited contribution to a special issue on Casimir Forces of J. Phys. Cond. matt

Journal ref: J. Phys.: Condens. Matter 27 (2015) 214021

Casimir-Polder interaction for gently curved surfaces

Authors: Giuseppe Bimonte, Thorsten Emig, Mehran Kardar

Abstract: We use a derivative expansion for gently curved surfaces to compute the leading and the next-to-leading curvature corrections to the Casimir-Polder interaction between a polarizable small particle and a non-planar surface. While our methods apply to any homogeneous and isotropic surface, explicit results are presented here for perfect conductors. We show that the derivative expansion of the Casimi… ▽ More We use a derivative expansion for gently curved surfaces to compute the leading and the next-to-leading curvature corrections to the Casimir-Polder interaction between a polarizable small particle and a non-planar surface. While our methods apply to any homogeneous and isotropic surface, explicit results are presented here for perfect conductors. We show that the derivative expansion of the Casimir-Polder potential follows from a resummation of its perturbative series, for small in-plane momenta. We consider the retarded, non-retarded and classical high temperature limits. △ Less

Submitted 24 September, 2014; originally announced September 2014.

Comments: 6 pages, 1 Figure

Journal ref: Phys. Rev. D 90, 081702(R) (2014)

Reversing the Critical Casimir force by shape deformation

Authors: G. Bimonte, T. Emig, M. Kardar

Abstract: The exact critical Casimir force between periodically deformed boundaries of a 2D semi-infinite strip is obtained for conformally invariant classical systems. Only two parameters (conformal charge and scaling dimension of a boundary changing operator), along withthe solution of an electrostatic problem, determine the Casimir force, rendering the theory practically applicable to any shape and arran… ▽ More The exact critical Casimir force between periodically deformed boundaries of a 2D semi-infinite strip is obtained for conformally invariant classical systems. Only two parameters (conformal charge and scaling dimension of a boundary changing operator), along withthe solution of an electrostatic problem, determine the Casimir force, rendering the theory practically applicable to any shape and arrangement. The attraction between any two mirror symmetric objects follows directly from our general result. The possibility of purely shape induced reversal of the force, as well as occurrence of stable equilibrium points, is demonstrated for certain conformally invariant models, including the tricritical Ising model. △ Less

Submitted 4 June, 2014; originally announced June 2014.

Comments: 5 pages, 4 figures

Journal ref: Physics Letters B 743, 138 (2015)

Hide it to see it better: a robust setup to probe the thermal Casimir effect

Authors: Giuseppe Bimonte

Abstract: We describe a Casimir setup consisting of two aligned sinusoidally corrugated Ni surfaces, one of which is "hidden" by a thin opaque layer of gold with a flat exposed surface. The gold layer acts as a low-pass filter that allows for a clean observation of the controversial thermal Casimir force between the corrugations, with currently available Casimir apparatuses. The proposed scheme of measureme… ▽ More We describe a Casimir setup consisting of two aligned sinusoidally corrugated Ni surfaces, one of which is "hidden" by a thin opaque layer of gold with a flat exposed surface. The gold layer acts as a low-pass filter that allows for a clean observation of the controversial thermal Casimir force between the corrugations, with currently available Casimir apparatuses. The proposed scheme of measurement, based on the phase-dependent modulation of the Casimir force, requires no electrostatic calibrations of the apparatus, and is unaffected by uncertainties in the knowledge of the optical properties of the surfaces. This scheme should allow for an unambiguous discrimination between alternative theoretical prescriptions that have been proposed in the literature for the thermal Casimir effect. △ Less

Submitted 4 June, 2014; v1 submitted 14 February, 2014; originally announced February 2014.

Comments: 5 pages, 2 encapsulated figures, final version accepted for publication in Physical Review Letters

Journal ref: Phys. Rev. Lett. 112, 240401 (2014)

Conformal Field Theory of Critical Casimir Interactions in 2D

Authors: G. Bimonte, T. Emig, M. Kardar

Abstract: Thermal fluctuations of a critical system induce long-ranged Casimir forces between objects that couple to the underlying field. For two dimensional (2D) conformal field theories (CFT) we derive an exact result for the Casimir interaction between two objects of arbitrary shape, in terms of (1) the free energy of a circular ring whose radii are determined by the mutual capacitance of two conductors… ▽ More Thermal fluctuations of a critical system induce long-ranged Casimir forces between objects that couple to the underlying field. For two dimensional (2D) conformal field theories (CFT) we derive an exact result for the Casimir interaction between two objects of arbitrary shape, in terms of (1) the free energy of a circular ring whose radii are determined by the mutual capacitance of two conductors with the objects' shape; and (2) a purely geometric energy that is proportional to conformal charge of the CFT, but otherwise super-universal in that it depends only on the shapes and is independent of boundary conditions and other details. △ Less

Submitted 15 July, 2013; originally announced July 2013.

Comments: 5 pages, 3 figures

Journal ref: EPL 104, 21001 (2013)

Interplay of roughness/modulation and curvature at proximity

Authors: Matthias Krüger, Vladyslav A. Golyk, Giuseppe Bimonte, Mehran Kardar

Abstract: We show that roughness or surface modulations change the distance dependence of (power-law) interactions between curved objects at proximity. The modified scaling law is then simply related to the order of the first non-vanishing coefficient of the Taylor expansion of the distribution of separations between the surfaces. The latter can in principle be estimated by scanning measurements, or compute… ▽ More We show that roughness or surface modulations change the distance dependence of (power-law) interactions between curved objects at proximity. The modified scaling law is then simply related to the order of the first non-vanishing coefficient of the Taylor expansion of the distribution of separations between the surfaces. The latter can in principle be estimated by scanning measurements, or computed for well characterized modulations, and then used to predict short-distance scaling behavior in disparate experiments. For example, we predict that the radiative heat transfer between a rough sphere and a plate approaches a constant with decreasing separation. Similar saturation is expected for the Casimir force between dielectric or metallic surfaces with appropriate modulations over distinct length scales. △ Less

Submitted 11 March, 2013; originally announced March 2013.

Comments: 5 pages, 2 figures

Journal ref: Europhys. Lett. 104, 41001 (2013)

Exact results for classical Casimir interactions: Dirichlet and Drude model in the sphere-sphere and sphere-plane geometry

Authors: G. Bimonte, T. Emig

Abstract: Analytic expressions that describe Casimir interactions over the entire range of separations have been limited to planar surfaces. Here we derive analytic expressions for the classical or high-temperature limit of Casimir interactions between two spheres (interior and exterior configurations), including the sphere-plane geometry as a special case, using bispherical coordinates. We consider both Di… ▽ More Analytic expressions that describe Casimir interactions over the entire range of separations have been limited to planar surfaces. Here we derive analytic expressions for the classical or high-temperature limit of Casimir interactions between two spheres (interior and exterior configurations), including the sphere-plane geometry as a special case, using bispherical coordinates. We consider both Dirichlet boundary conditions and metallic boundary conditions described by the Drude model. At short distances, closed-form expansions are derived from the exact result, displaying an intricate structure of deviations from the commonly employed proximity force approximation. △ Less

Submitted 25 July, 2012; originally announced July 2012.

Comments: 5 pages, 2 figures

Journal ref: Phys. Rev. Lett. 109, 160403 (2012)

Trace formulae for non-equilibrium Casimir interactions, heat radiation and heat transfer for arbitrary objects

Authors: Matthias Krüger, Giuseppe Bimonte, Thorsten Emig, Mehran Kardar

Abstract: We present a detailed derivation of heat radiation, heat transfer and (Casimir) interactions for N arbitrary objects in the framework of fluctuational electrodynamics in thermal non-equilibrium. The results can be expressed as basis-independent trace formulae in terms of the scattering operators of the individual objects. We prove that heat radiation of a single object is positive, and that heat t… ▽ More We present a detailed derivation of heat radiation, heat transfer and (Casimir) interactions for N arbitrary objects in the framework of fluctuational electrodynamics in thermal non-equilibrium. The results can be expressed as basis-independent trace formulae in terms of the scattering operators of the individual objects. We prove that heat radiation of a single object is positive, and that heat transfer (for two arbitrary passive objects) is from the hotter to a colder body. The heat transferred is also symmetric, exactly reversed if the two temperatures are exchanged. Introducing partial wave-expansions, we transform the results for radiation, transfer and forces into traces of matrices that can be evaluated in any basis, analogous to the equilibrium Casimir force. The method is illustrated by (re)deriving the heat radiation of a plate, a sphere and a cylinder. We analyze the radiation of a sphere for different materials, emphasizing that a simplification often employed for metallic nano-spheres is typically invalid. We derive asymptotic formulae for heat transfer and non-equilibrium interactions for the cases of a sphere in front a plate and for two spheres, extending previous results. As an example, we show that a hot nano-sphere can levitate above a plate with the repulsive non-equilibrium force overcoming gravity -- an effect that is not due to radiation pressure. △ Less

Submitted 16 July, 2012; v1 submitted 2 July, 2012; originally announced July 2012.

Comments: 29 pages, 6 figures (v2: Sentence added in Sec. 1)

Journal ref: Phys Rev. B 86, 115423 (2012)

Measuring the influence of Casimir energy on superconducting phase transitions: a cross-correlation data analysis

Authors: Annalisa Allocca, Giuseppe Bimonte, Detlef Born, Enrico Calloni, Giampiero Esposito, Uwe Huebner, Evgeni Il'ichev, Luigi Rosa, Francesco Tafuri

Abstract: The ALADIN experiment aims at observing how the critical magnetic field of a superconducting Aluminum film is modified, when it constitutes one of the reflecting surfaces of a Casimir cavity. If successful, such an observation would reveal the influence of vacuum energy on the superconducting phase transition. In this paper a rigorous analysis of experimental data is reported, the results are disc… ▽ More The ALADIN experiment aims at observing how the critical magnetic field of a superconducting Aluminum film is modified, when it constitutes one of the reflecting surfaces of a Casimir cavity. If successful, such an observation would reveal the influence of vacuum energy on the superconducting phase transition. In this paper a rigorous analysis of experimental data is reported, the results are discussed and compared with theoretical predictions based on Lifshitz theory of dispersion forces, and the BCS formula for the optical conductivity of superconductors. The main novelty with respect to a previous data analysis by some of the authors, is the use of a cross-correlation method which is more rigorous and leads to better estimates. △ Less

Submitted 11 May, 2012; originally announced May 2012.

Comments: 7 pages, 10 figures

Material dependence of Casimir forces: gradient expansion beyond proximity

Authors: G. Bimonte, T. Emig, M. Kardar

Abstract: A widely used method for estimating Casimir interactions [H. B. G. Casimir, Proc. K. Ned. Akad. Wet. 51, 793 (1948)] between gently curved material surfaces at short distances is the proximity force approximation (PFA). While this approximation is asymptotically exact at vanishing separations, quantifying corrections to PFA has been notoriously difficult. Here we use a derivative expansion to comp… ▽ More A widely used method for estimating Casimir interactions [H. B. G. Casimir, Proc. K. Ned. Akad. Wet. 51, 793 (1948)] between gently curved material surfaces at short distances is the proximity force approximation (PFA). While this approximation is asymptotically exact at vanishing separations, quantifying corrections to PFA has been notoriously difficult. Here we use a derivative expansion to compute the leading curvature correction to PFA for metals (gold) and insulators (SiO$_2$) at room temperature. We derive an explicit expression for the amplitude $\hatθ_1$ of the PFA correction to the force gradient for axially symmetric surfaces. In the non-retarded limit, the corrections to the Casimir free energy are found to scale logarithmically with distance. For gold, $\hatθ_1$ has an unusually large temperature dependence. △ Less

Submitted 21 February, 2012; v1 submitted 6 December, 2011; originally announced December 2011.

Comments: 4 pages, 2 figures

Journal ref: Appl. Phys. Lett. 100, 074110 (2012)

Casimir forces beyond the proximity approximation

Authors: G. Bimonte, T. Emig, R. L. Jaffe, M. Kardar

Abstract: The proximity force approximation (PFA) relates the interaction between closely spaced, smoothly curved objects to the force between parallel plates. Precision experiments on Casimir forces necessitate, and spur research on, corrections to the PFA. We use a derivative expansion for gently curved surfaces to derive the leading curvature modifications to the PFA. Our methods apply to any homogeneous… ▽ More The proximity force approximation (PFA) relates the interaction between closely spaced, smoothly curved objects to the force between parallel plates. Precision experiments on Casimir forces necessitate, and spur research on, corrections to the PFA. We use a derivative expansion for gently curved surfaces to derive the leading curvature modifications to the PFA. Our methods apply to any homogeneous and isotropic materials; here we present results for Dirichlet and Neumann boundary conditions and for perfect conductors. A Padé extrapolation constrained by a multipole expansion at large distance and our improved expansion at short distances, provides an accurate expression for the sphere-plate Casimir force at all separations. △ Less

Submitted 5 October, 2011; originally announced October 2011.

Comments: 4 pages, 1 figure

Journal ref: EPL 97, 50001 (2012)

Dilution and resonance enhanced repulsion in non-equilibrium fluctuation forces

Authors: Giuseppe Bimonte, Thorsten Emig, Matthias Kruger, Mehran Kardar

Abstract: In equilibrium, forces induced by fluctuations of the electromagnetic field between electrically polarizable objects (microscopic or macroscopic) in vacuum are always attractive. The force may, however, become repulsive for microscopic particles coupled to thermal baths with different temperatures. We demonstrate that this non-equilibrium repulsion can be realized also between macroscopic objects,… ▽ More In equilibrium, forces induced by fluctuations of the electromagnetic field between electrically polarizable objects (microscopic or macroscopic) in vacuum are always attractive. The force may, however, become repulsive for microscopic particles coupled to thermal baths with different temperatures. We demonstrate that this non-equilibrium repulsion can be realized also between macroscopic objects, as planar slabs, if they are kept at different temperatures. It is shown that repulsion can be enhanced by (i) tuning of material resonances in the thermal region, and by (ii) reducing the dielectric contrast due to "dilution". This can lead to stable equilibrium positions. We discuss the realization of these effects for aerogels, yielding repulsion down to sub-micron distances at realistic porosities. △ Less

Submitted 8 July, 2011; originally announced July 2011.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. A 84, 042503 (2011)

Non-equilibrium Casimir forces: Spheres and sphere-plate

Authors: Matthias Krüger, Thorsten Emig, Giuseppe Bimonte, Mehran Kardar

Abstract: We discuss non-equilibrium extensions of the Casimir force (due to electromagnetic fluctuations), where the objects as well as the environment are held at different temperatures. While the formalism we develop is quite general, we focus on a sphere in front of a plate, as well as two spheres, when the radius is small compared to separation and thermal wavelengths. In this limit the forces can be e… ▽ More We discuss non-equilibrium extensions of the Casimir force (due to electromagnetic fluctuations), where the objects as well as the environment are held at different temperatures. While the formalism we develop is quite general, we focus on a sphere in front of a plate, as well as two spheres, when the radius is small compared to separation and thermal wavelengths. In this limit the forces can be expressed analytically in terms of the lowest order multipoles, and corroborated with results obtained by diluting parallel plates of vanishing thickness. Non-equilibrium forces are generally stronger than their equilibrium counterpart, and may oscillate with separation (at a scale set by material resonances). For both geometries we obtain stable points of zero net force, while two spheres may have equal forces in magnitude and direction resulting in a self-propelling state. △ Less

Submitted 27 May, 2011; originally announced May 2011.

Comments: 6 pages, 6 figures

Journal ref: Europhys.Lett.95:21002,2011

Making precise predictions of the Casimir force between metallic plates via a weighted Kramers-Kronig transform

Authors: Giuseppe Bimonte

Abstract: The possibility of making precise predictions for the Casimir force is essential for the theoretical interpretation of current precision experiments on the thermal Casimir effect with metallic plates, especially for sub-micron separations. For this purpose it is necessary to estimate very accurately the dielectric function of a conductor along the imaginary frequency axis. This task is complicated… ▽ More The possibility of making precise predictions for the Casimir force is essential for the theoretical interpretation of current precision experiments on the thermal Casimir effect with metallic plates, especially for sub-micron separations. For this purpose it is necessary to estimate very accurately the dielectric function of a conductor along the imaginary frequency axis. This task is complicated in the case of ohmic conductors, because optical data do not usually extend to sufficiently low frequencies to permit an accurate evaluation of the standard Kramers-Kronig integral used to compute $ε(i ξ)$. By making important improvements in the results of a previous paper by the author, it is shown that this difficulty can be resolved by considering suitable weighted dispersions relations, which strongly suppress the contribution of low frequencies. The weighted dispersion formulae presented in this paper permit to estimate accurately the dielectric function of ohmic conductors for imaginary frequencies, on the basis of optical data extending from the IR to the UV, with no need of uncontrolled data extrapolations towards zero frequency that are instead necessary with standard Kramers-Kronig relations. Applications to several sets of data for gold films are presented to demonstrate viability of the new dispersion formulae. △ Less

Submitted 8 March, 2011; v1 submitted 7 December, 2010; originally announced December 2010.

Comments: 18 pages, 15 encapsulated figures. In the revised version important improvements have been made, which affect the main conclusions of the paper

Report number: DSF13/2010

Journal ref: Phys.Rev.A83:042109,2011

Comment on "Temperature dependence of the Casimir force for lossy bulk media"

Authors: G. Bimonte, G. L. Klimchitskaya, V. M. Mostepanenko

Abstract: Recently Yampol'skii et al. [Phys. Rev. A v.82, 032511 (2010)] advocated that Lifshitz theory is not applicable when the characteristic wavelength of the fluctuating electromagnetic field, responsible for the thermal correction to the Casimir force, is larger than the size of the metal test bodies. It was claimed that this is the case in experiments which exclude Lifshitz theory combined with the… ▽ More Recently Yampol'skii et al. [Phys. Rev. A v.82, 032511 (2010)] advocated that Lifshitz theory is not applicable when the characteristic wavelength of the fluctuating electromagnetic field, responsible for the thermal correction to the Casimir force, is larger than the size of the metal test bodies. It was claimed that this is the case in experiments which exclude Lifshitz theory combined with the Drude model. We calculate the wavelengths of the evanescent waves giving the dominant contribution to the thermal correction and we find that they are much smaller than the sizes of the test bodies. The opposite conclusion obtained by the authors arose from a confusion between propagating and evanescent waves. △ Less

Submitted 5 October, 2010; originally announced October 2010.

Comments: 3 pages

Journal ref: Phys.Rev.A84:036501,2011

A generalized Kramers-Kronig transform for Casimir effect computations

Authors: Giuseppe Bimonte

Abstract: Recent advances in experimental techniques now permit to measure the Casimir force with unprecedented precision. In order to achieve a comparable precision in the theoretical prediction of the force, it is necessary to accurately determine the electric permittivity of the materials constituting the plates along the imaginary frequency axis. The latter quantity is not directly accessible to exper… ▽ More Recent advances in experimental techniques now permit to measure the Casimir force with unprecedented precision. In order to achieve a comparable precision in the theoretical prediction of the force, it is necessary to accurately determine the electric permittivity of the materials constituting the plates along the imaginary frequency axis. The latter quantity is not directly accessible to experiments, but it can be determined via dispersion relations from experimental optical data. In the experimentally important case of conductors, however, a serious drawback of the standard dispersion relations commonly used for this purpose, is their strong dependence on the chosen low-frequency extrapolation of the experimental optical data, which introduces a significant and not easily controllable uncertainty in the result. In this paper we show that a simple modification of the standard dispersion relations, involving suitable analytic window functions, resolves this difficulty, making it possible to reliably determine the electric permittivity at imaginary frequencies solely using experimental optical data in the frequency interval where they are available, without any need of uncontrolled data extrapolations. △ Less

Submitted 11 May, 2010; v1 submitted 12 February, 2010; originally announced February 2010.

Comments: 10 pages, 6 encapsulated figures. A few typos corrected, some references added. The new version matches the one accepted for publication on Phys. Rev. A

Report number: DSF/14/2010

Journal ref: Phys.Rev.A81:062501,2010

The thermal Casimir effect for conducting plates and the Bohr-van Leeuwen theorem

Authors: Giuseppe Bimonte

Abstract: We examine recent prescriptions for estimating the thermal Casimir force between two metallic plates from the point of view of their consistency with the Bohr-van Leeuwen theorem of classical statistical physics. We find that prescriptions including the effect of ohmic dissipation satisfy the theorem, while prescriptions that neglect ohmic dissipation do not. We examine recent prescriptions for estimating the thermal Casimir force between two metallic plates from the point of view of their consistency with the Bohr-van Leeuwen theorem of classical statistical physics. We find that prescriptions including the effect of ohmic dissipation satisfy the theorem, while prescriptions that neglect ohmic dissipation do not. △ Less

Submitted 12 November, 2009; originally announced November 2009.

Comments: 3 pages, contribution to the proceedings of the QFEXT09 conference, 21-25 September, 2009, Norman, Oklahoma, USA

Report number: DSF/16/2009

A scattering approach to Casimir forces and radiative heat transfer for nanostructured surfaces out of thermal equilibrium

Authors: Giuseppe Bimonte

Abstract: We develop an exact method for computing Casimir forces and the power of radiative heat transfer between two arbitrary nanostructured surfaces out of thermal equilibrium. The method is based on a generalization of the scattering approach recently used in investigations on the Casimir effect. Analogously to the equilibrium case, we find that also out of thermal equilibrium the shape and compositi… ▽ More We develop an exact method for computing Casimir forces and the power of radiative heat transfer between two arbitrary nanostructured surfaces out of thermal equilibrium. The method is based on a generalization of the scattering approach recently used in investigations on the Casimir effect. Analogously to the equilibrium case, we find that also out of thermal equilibrium the shape and composition of the surfaces enter only through their scattering matrices. The expressions derived provide exact results in terms of the scattering matrices of the intervening surfaces. △ Less

Submitted 11 September, 2009; originally announced September 2009.

Comments: 7 pages, accepted for publication in Physical Review A

Report number: DSF/13/2009

Journal ref: Phys.Rev.A80:042102,2009

Optical BCS conductivity at imaginary frequencies and dispersion energies of superconductors

Authors: G. Bimonte, H. Haakh, C. Henkel, F. Intravaia

Abstract: We present an efficient expression for the analytic continuation to arbitrary complex frequencies of the complex optical and AC conductivity of a homogeneous superconductor with arbitrary mean free path. Knowledge of this quantity is fundamental in the calculation of thermodynamic potentials and dispersion energies involving type-I superconducting bodies. When considered for imaginary frequencies,… ▽ More We present an efficient expression for the analytic continuation to arbitrary complex frequencies of the complex optical and AC conductivity of a homogeneous superconductor with arbitrary mean free path. Knowledge of this quantity is fundamental in the calculation of thermodynamic potentials and dispersion energies involving type-I superconducting bodies. When considered for imaginary frequencies, our formula evaluates faster than previous schemes involving Kramers--Kronig transforms. A number of applications illustrates its efficiency: a simplified low-frequency expansion of the conductivity, the electromagnetic bulk self-energy due to longitudinal plasma oscillations, and the Casimir free energy of a superconducting cavity. △ Less

Submitted 18 March, 2010; v1 submitted 22 July, 2009; originally announced July 2009.

Comments: 20 pages, 7 figures, calculation of Casimir energy added

Journal ref: J. Phys. A 43 (2010) 145304

The impact of magnetic properties on atom-wall interaction

Authors: G. Bimonte, G. L. Klimchitskaya, V. M. Mostepanenko

Abstract: The Lifshitz-type formulas for the free energy and Casimir-Polder force acting between an atom possessing a permanent magnetic moment and a wall made of different materials are derived. Simple model allowing analytic results is considered where the atomic magnetic susceptibility is frequency-independent and wall is made of ideal metal. Numerical computations of the Casimir-Polder force are perfo… ▽ More The Lifshitz-type formulas for the free energy and Casimir-Polder force acting between an atom possessing a permanent magnetic moment and a wall made of different materials are derived. Simple model allowing analytic results is considered where the atomic magnetic susceptibility is frequency-independent and wall is made of ideal metal. Numerical computations of the Casimir-Polder force are performed for H atom interacting with walls made of ideal metal, nonmagnetic (Au) and ferromagnetic (Fe) metals and of ferromagnetic dielectric. It is shown that for the first three wall materials the inclusion of the magnetic moment of an atom decreases and for the fourth material increases the magnitude of the Casimir-Polder force. △ Less

Submitted 1 April, 2009; originally announced April 2009.

Comments: 14 pages, 2 figures; accepted for publication in Phys. Rev. A

Journal ref: Phys.Rev.A79:042906,2009.