Showing 1–39 of 39 results for author: van der Zant, H

Tuning the Spin Interaction in Non-planar Organic Diradicals Through Mechanical Manipulation

Authors: Alessio Vegliante, Saleta Fernandez, Ricardo Ortiz, Manuel Vilas-Varela, Thomas Baum, Niklas Friedrich, Francisco Romero-Lara, Andrea Aguirre, Katerina Vaxevani, Dongfei Wang, Carlos Garcia, Herre S. J. van der Zant, Thomas Frederiksen, Diego Peña, Jose Ignacio Pascual

Abstract: Open-shell polycyclic aromatic hydrocarbons (PAHs) represent promising building blocks for carbon-based functional magnetic materials. Their magnetic properties stem from the presence of unpaired electrons localized in radical states of $π$ character. Consequently, these materials are inclined to exhibit spin delocalization, form extended collective states, and respond to the flexibility of the mo… ▽ More Open-shell polycyclic aromatic hydrocarbons (PAHs) represent promising building blocks for carbon-based functional magnetic materials. Their magnetic properties stem from the presence of unpaired electrons localized in radical states of $π$ character. Consequently, these materials are inclined to exhibit spin delocalization, form extended collective states, and respond to the flexibility of the molecular backbones. However, they are also highly reactive, requiring structural strategies to protect the radical states from reacting with the environment. Here, we demonstrate that the open-shell ground state of the diradical 2-OS survives on a Au(111) substrate as a global singlet formed by two unpaired electrons with anti-parallel spins coupled through a conformational dependent interaction. The 2-OS molecule is a protected derivative of the Chichibabin's diradical, featuring a non-planar geometry that destabilizes the closed-shell quinoidal structure. Using scanning tunneling microscopy (STM), we localized the two interacting spins at the molecular edges, and detected an excited triplet state a few millielectronvolts above the singlet ground state. Mean-field Hubbard simulations reveal that the exchange coupling between the two spins strongly depends on the torsional angles between the different molecular moieties, suggesting the possibility of influencing the molecule's magnetic state through structural changes. This was demonstrated here using the STM tip to manipulate the molecular conformation, while simultaneously detecting changes in the spin excitation spectrum. Our work suggests the potential of these PAHs for a new class of all-carbon spin-crossover materials. △ Less

Submitted 13 February, 2024; originally announced February 2024.

Comments: 8 pages in the main manuscript, including 4 figures, 21 pages in the supporting info, including 19 figures

Journal ref: ACS Nano 18, 26514-26521 (2024)

Optomechanical methodology for characterizing the thermal properties of 2D materials

Authors: Hanqing Liu, Hatem Brahmi, Carla Boix-Constant, Herre S. J. van der Zant, Peter G. Steeneken, Gerard J. Verbiest

Abstract: Heat transport in two-dimensions is fundamentally different from that in three dimensions. As a consequence, the thermal properties of 2D materials are of great interest, both from scientific and application point of view. However, few techniques are available for accurate determination of these properties in ultrathin suspended membranes. Here, we present an optomechanical methodology for extract… ▽ More Heat transport in two-dimensions is fundamentally different from that in three dimensions. As a consequence, the thermal properties of 2D materials are of great interest, both from scientific and application point of view. However, few techniques are available for accurate determination of these properties in ultrathin suspended membranes. Here, we present an optomechanical methodology for extracting the thermal expansion coefficient, specific heat and thermal conductivity of ultrathin membranes made of 2H-TaS2, FePS3, polycrystalline silicon, MoS2 and WSe2. The obtained thermal properties are in good agreement with values reported in the literature for the same materials. Our work provides an optomechanical method for determining thermal properties of ultrathin suspended membranes, that are difficult to measure otherwise. It can does provide a route towards improving our understanding of heat transport in the 2D limit and facilitates engineering of 2D structures with dedicated thermal performance. △ Less

Submitted 10 December, 2023; originally announced December 2023.

Comments: 14 pages, 10 figures

Quantum-assisted electron transport in microbial protein wires across macroscopic distances

Authors: Jasper R. van der Veen, Silvia Hidalgo Martinez, Albert Wieland, Matteo De Pellegrin, Rick Verweij, Yaroslav M. Blanter, Herre S. J. van der Zant, Filip J. R. Meysman

Abstract: Multicellular cable bacteria display an exceptional form of biological conduction, channeling electrical currents across centimeter distances through a regular network of protein fibers embedded in the cell envelope. The fiber conductivity is among the highest recorded for biomaterials, providing a promising outlook for new bio-electronic technologies, but the underlying mechanism of electron tran… ▽ More Multicellular cable bacteria display an exceptional form of biological conduction, channeling electrical currents across centimeter distances through a regular network of protein fibers embedded in the cell envelope. The fiber conductivity is among the highest recorded for biomaterials, providing a promising outlook for new bio-electronic technologies, but the underlying mechanism of electron transport remains elusive. Here, we use detailed electrical characterization down to cryogenic temperatures, which reveals that long-range conduction in these bacterial protein wires is based on a unique type of quantum-assisted multistep hopping. The conductance near room temperature reveals thermally activated behavior, yet with a low activation energy, suggesting that substantial delocalization across charge carrier sites contributes to high conductivity. At cryogenic temperatures, the conductance becomes virtually independent of temperature, thus indicating that quantum vibrations couple to the charge transport. Our results demonstrate that quantum effects can manifest themselves in biological systems over macroscopic length scales. △ Less

Submitted 18 August, 2023; originally announced August 2023.

Comments: The manuscript contains 2967 words, 15 pages, 3 figures and 49 references

Nitrogen-vacancy magnetometry of CrSBr by diamond membrane transfer

Authors: Talieh S. Ghiasi, Michael Borst, Samer Kurdi, Brecht G. Simon, Iacopo Bertelli, Carla Boix-Constant, Samuel Mañas-Valero, Herre S. J. van der Zant, Toeno van der Sar

Abstract: Magnetic imaging using nitrogen-vacancy (NV) spins in diamonds is a powerful technique for acquiring quantitative information about sub-micron scale magnetic order. A major challenge for its application in the research on two-dimensional (2D) magnets is the positioning of the NV centers at a well-defined, nanoscale distance to the target material required for detecting the small magnetic fields ge… ▽ More Magnetic imaging using nitrogen-vacancy (NV) spins in diamonds is a powerful technique for acquiring quantitative information about sub-micron scale magnetic order. A major challenge for its application in the research on two-dimensional (2D) magnets is the positioning of the NV centers at a well-defined, nanoscale distance to the target material required for detecting the small magnetic fields generated by magnetic monolayers. Here, we develop a diamond 'dry-transfer' technique, akin to the state-of-the-art 2D-materials assembly methods, and use it to place a diamond micro-membrane in direct contact with the 2D interlayer antiferromagnet CrSBr. We harness the resulting NV-sample proximity to spatially resolve the magnetic stray fields generated by the CrSBr, present only where the CrSBr thickness changes by an odd number of layers. From the magnetic stray field of a single uncompensated ferromagnetic layer in the CrSBr, we extract a monolayer magnetization of $M_\mathrm{CSB}$ = 0.46(2) T, without the need for exfoliation of monolayer crystals or applying large external magnetic fields. The ability to deterministically place NV-ensemble sensors into contact with target materials and detect ferromagnetic monolayer magnetizations paves the way for quantitative analysis of a wide range of 2D magnets assembled on arbitrary target substrates. △ Less

Submitted 3 July, 2023; originally announced July 2023.

Journal ref: npj 2D Materials and Applications (2023)

Enhanced sensitivity and tunability of thermomechanical resonance near the buckling bifurcation

Authors: Hanqing Liu, Gabriele Baglioni, Carla B. Constant, Herre S. J. van der Zant, Peter G. Steeneken, Gerard J. Verbiest

Abstract: The high susceptibility of ultrathin two-dimensional (2D) material resonators to force and temperature makes them ideal systems for sensing applications and exploring thermomechanical coupling. Although the dynamics of these systems at high stress has been thoroughly investigated, their behavior near the buckling transition has received less attention. Here, we demonstrate that the force sensitivi… ▽ More The high susceptibility of ultrathin two-dimensional (2D) material resonators to force and temperature makes them ideal systems for sensing applications and exploring thermomechanical coupling. Although the dynamics of these systems at high stress has been thoroughly investigated, their behavior near the buckling transition has received less attention. Here, we demonstrate that the force sensitivity and frequency tunability of 2D material resonators are significantly enhanced near the buckling bifurcation. This bifurcation is triggered by compressive displacement that we induce via thermal expansion of the devices, while measuring their dynamics via an optomechanical technique. We understand the frequency tuning of the devices through a mechanical buckling model, which allows to extract the central deflection and boundary compressive displacement of the membrane. Surprisingly, we obtain a remarkable enhancement of up to 14x the vibration amplitude attributed to a very low stiffness of the membrane at the buckling transition, as well as a high frequency tunability by temperature of more than 4.02 %/K. The presented results provide insights into the effects of buckling on the dynamics of free-standing 2D materials and thereby open up opportunities for the realization of 2D resonant sensors with buckling-enhanced sensitivity. △ Less

Submitted 7 December, 2023; v1 submitted 1 May, 2023; originally announced May 2023.

Comments: 20 pages and 4 figures

Implementation of SNS thermometers into molecular devices for cryogenic thermoelectric experiments

Authors: Serhii Volosheniuk, Damian Bouwmeester, Chunwei Hsu, H. S. J. van der Zant, Pascal Gehring

Abstract: Thermocurrent flowing through a single-molecule device contains valuable information about the quantum properties of the molecular structure and, in particular, on its electronic and phononic excitation spectra, and entropy. Furthermore, accessing the thermoelectric heat-to-charge conversion efficiency experimentally can help to select suitable molecules for future energy conversion devices, which… ▽ More Thermocurrent flowing through a single-molecule device contains valuable information about the quantum properties of the molecular structure and, in particular, on its electronic and phononic excitation spectra, and entropy. Furthermore, accessing the thermoelectric heat-to-charge conversion efficiency experimentally can help to select suitable molecules for future energy conversion devices, which - predicted by theoretical studies - could reach unprecedented efficiencies. However, one of the major challenges in quantifying thermocurrents in nanoscale devices is to determine the exact temperature bias applied to the junction. In this work, we have incorporated a superconductor-normal metal-superconductor (SNS) Josephson junction thermometer into a single-molecule device. The critical current of the Josephson junction depends accurately on minute changes of the electronic temperature in a wide temperature range from 100 mK to 1.6 K. Thus, we present a device architecture which can enable thermoelectric experiments on single molecules down to millikelvin temperatures with high precision. △ Less

Submitted 23 February, 2023; originally announced February 2023.

Nanomechanical absorption spectroscopy of 2D materials with femtowatt sensitivity

Authors: Jan N. Kirchhof, Yuefeng Yu, Denis Yagodkin, Nele Stetzuhn, Daniel B. de Araújo, Kostas Kanellopulos, Samuel Manas-Valero, Eugenio Coronado, Herre van der Zant, Stephanie Reich, Silvan Schmid, Kirill I. Bolotin

Abstract: Nanomechanical spectroscopy (NMS) is a recently developed approach to determine optical absorption spectra of nanoscale materials via mechanical measurements. It is based on measuring changes in the resonance frequency of a membrane resonator vs. the photon energy of incoming light. This method is a direct measurement of absorption, which has practical advantages compared to common optical spectro… ▽ More Nanomechanical spectroscopy (NMS) is a recently developed approach to determine optical absorption spectra of nanoscale materials via mechanical measurements. It is based on measuring changes in the resonance frequency of a membrane resonator vs. the photon energy of incoming light. This method is a direct measurement of absorption, which has practical advantages compared to common optical spectroscopy approaches. In the case of two-dimensional (2D) materials, NMS overcomes limitations inherent to conventional optical methods, such as the complications associated with measurements at high magnetic fields and low temperatures. In this work, we develop a protocol for NMS of 2D materials that yields two orders of magnitude improved sensitivity compared to previous approaches, while being simpler to use. To this end, we use electrical sample actuation, which simplifies the experiment and provides a reliable calibration for greater accuracy. Additionally, the use of low-stress silicon nitride membranes as our substrate reduces the noise-equivalent power to $NEP = 890 fW/\sqrt{Hz}$, comparable to commercial semiconductor photodetectors. We use our approach to spectroscopically characterize a two-dimensional transition metal dichalcogenide (WS$_2$), a layered magnetic semiconductor (CrPS$_4$), and a plasmonic supercrystal consisting of gold nanoparticles. △ Less

Submitted 28 January, 2023; originally announced January 2023.

Nanomechanical resonators fabricated by atomic layer deposition on suspended 2D materials

Authors: Hanqing Liu, Saravana B. Basuvalingam, Saurabh Lodha, Ageeth A. Bol, Herre S. J. van der Zant, Peter G. Steeneken, G. J. Verbiest

Abstract: Atomic layer deposition (ALD), a layer-by-layer controlled method to synthesize ultrathin materials, provides various merits over other techniques such as precise thickness control, large area scalability and excellent conformality. Here we demonstrate the possibility of using ALD growth on top of suspended 2D materials to fabricate nanomechanical resonators. We fabricate ALD nanomechanical resona… ▽ More Atomic layer deposition (ALD), a layer-by-layer controlled method to synthesize ultrathin materials, provides various merits over other techniques such as precise thickness control, large area scalability and excellent conformality. Here we demonstrate the possibility of using ALD growth on top of suspended 2D materials to fabricate nanomechanical resonators. We fabricate ALD nanomechanical resonators consisting of a graphene/MoS$_2$ heterostructure. Using AFM indentation and optothermal drive, we measure their mechanical properties including Young's modulus, resonance frequency and quality factor, showing similar values as their exfoliated and chemical vapor deposited counterparts. We also demonstrate the fabrication of nanomechanical resonators by exfoliating an ALD grown NbS$_2$ layer. This study exemplifies the potential of ALD techniques to produce high-quality suspended nanomechanical membranes, providing a promising route towards high-volume fabrication of future multilayer nanodevices and nanoelectromechanical systems. △ Less

Submitted 16 December, 2022; originally announced December 2022.

Comments: 8 pages, 6 figures

Ultra-sensitive graphene membranes for microphone applications

Authors: Gabriele Baglioni, Roberto Pezone, Sten Vollebregt, Katarina Cvetanovic, Marko Spasenovic, Dejan Todorovic, Hanqing Liu, Gerard J. Verbiest, Herre S. J. van der Zant, y, Peter G. Steeneken

Abstract: Microphones exploit the motion of suspended membranes to detect sound waves. Since the microphone performance can be improved by reducing the thickness and mass of its sensing membrane, graphene-based microphones are expected to outperform state-of-the-art microelectromechanical (MEMS) microphones and allow further miniaturization of the device. Here, we present a laser vibrometry study of the aco… ▽ More Microphones exploit the motion of suspended membranes to detect sound waves. Since the microphone performance can be improved by reducing the thickness and mass of its sensing membrane, graphene-based microphones are expected to outperform state-of-the-art microelectromechanical (MEMS) microphones and allow further miniaturization of the device. Here, we present a laser vibrometry study of the acoustic response of suspended multilayer graphene membranes for microphone applications. We address performance parameters relevant for acoustic sensing, including mechanical sensitivity, limit of detection and nonlinear distortion, and discuss the trade-offs and limitations in the design of graphene microphones. We demonstrate superior mechanical sensitivities of the graphene membranes, reaching more than 2 orders of magnitude higher compliances than commercial MEMS devices, and report a limit of detection as low as 15 dBSPL, which is 10 - 15 dB lower than that featured by current MEMS microphones. △ Less

Submitted 7 November, 2022; originally announced November 2022.

Comments: 34 pages, 6 figures, 7 supplementary figures

Self-sealing complex oxide resonators

Authors: Martin Lee, Martin Robin, Ruben Guis, Ulderico Filippozzi, Dong Hoon Shin, Thierry C. van Thiel, Stijn Paardekooper, Johannes R. Renshof, Herre S. J. van der Zant, Andrea D. Caviglia, Gerard J. Verbiest, Peter G. Steeneken

Abstract: Although 2D materials hold great potential for next-generation pressure sensors, recent studies revealed that gases permeate along the membrane-surface interface that is only weakly bound by van der Waals interactions, necessitating additional sealing procedures. In this work, we demonstrate the use of free-standing complex oxides as self-sealing membranes that allow the reference cavity of pressu… ▽ More Although 2D materials hold great potential for next-generation pressure sensors, recent studies revealed that gases permeate along the membrane-surface interface that is only weakly bound by van der Waals interactions, necessitating additional sealing procedures. In this work, we demonstrate the use of free-standing complex oxides as self-sealing membranes that allow the reference cavity of pressure sensors to be sealed by a simple anneal. To test the hermeticity, we study the gas permeation time constants in nano-mechanical resonators made from SrRuO3 and SrTiO3 membranes suspended over SiO2/Si cavities which show an improvement up to 4 orders of magnitude in the permeation time constant after annealing the devices for 15 minutes. Similar devices fabricated on Si3N4/Si do not show such improvements, suggesting that the adhesion increase over SiO2 is mediated by oxygen bonds that are formed at the SiO2/complex oxide interface during the self-sealing anneal. We confirm the enhancement of adhesion by picosecond ultrasonics measurements which show an increase in the interfacial stiffness by 70% after annealing. Since it is straigthforward to apply, the presented self-sealing method is thus a promising route toward realizing ultrathin hermetic pressure sensors. △ Less

Submitted 8 September, 2021; originally announced September 2021.

Comments: 7 pages, 5 figures

Tunable strong coupling of mechanical resonance between spatially separated FePS$_3$ nanodrums

Authors: Makars Šiškins, Ekaterina Sokolovskaya, Martin Lee, Samuel Mañas-Valero, Dejan Davidovikj, Herre S. J. van der Zant, Peter G. Steeneken

Abstract: Coupled nanomechanical resonators made of two-dimensional materials are promising for processing information with mechanical modes. However, the challenge for these types of systems is to control the coupling. Here, we demonstrate strong coupling of motion between two suspended membranes of the magnetic 2D material FePS$_3$. We describe a tunable electromechanical mechanism for control over both t… ▽ More Coupled nanomechanical resonators made of two-dimensional materials are promising for processing information with mechanical modes. However, the challenge for these types of systems is to control the coupling. Here, we demonstrate strong coupling of motion between two suspended membranes of the magnetic 2D material FePS$_3$. We describe a tunable electromechanical mechanism for control over both the resonance frequency and the coupling strength using a gate voltage electrode under each membrane. We show that the coupling can be utilized for transferring data from one drum to the other by amplitude modulation. Finally, we also study the temperature dependence of the coupling, and in particular how it is affected by the antiferromagnetic phase transition characteristic of this material. The presented electrical coupling of resonant magnetic 2D membranes holds promise of transferring mechanical energy over a distance at low electrical power, thus enabling novel data readout and information processing technologies. △ Less

Submitted 2 July, 2021; originally announced July 2021.

Squeeze-film effect on atomically thin resonators in the high-pressure limit

Authors: Robin J. Dolleman, Debadi Chakraborty, Daniel R. Ladiges, Herre S. J. van der Zant, John E. Sader, Peter G. Steeneken

Abstract: The resonance frequency of membranes depends on the gas pressure due to the squeeze-film effect, induced by the compression of a thin gas film that is trapped underneath the resonator by the high frequency motion. This effect is particularly large in low-mass graphene membranes, which makes them promising candidates for pressure sensing applications. Here, we study the squeeze-film effect in singl… ▽ More The resonance frequency of membranes depends on the gas pressure due to the squeeze-film effect, induced by the compression of a thin gas film that is trapped underneath the resonator by the high frequency motion. This effect is particularly large in low-mass graphene membranes, which makes them promising candidates for pressure sensing applications. Here, we study the squeeze-film effect in single layer graphene resonators and find that their resonance frequency is lower than expected from models assuming ideal compression. To understand this deviation, we perform Boltzmann and continuum finite-element simulations, and propose an improved model that includes the effects of gas leakage and can account for the observed pressure dependence of the resonance frequency. Thus, this work provides further understanding of the squeeze-film effect and provides further directions into optimizing the design of squeeze-film pressure sensors from 2D materials. △ Less

Submitted 17 June, 2021; originally announced June 2021.

Large tunability of strain in WO3 single-crystal microresonators controlled by exposure to H2 gas

Authors: Nicola Manca, Giordano Mattoni, Marco Pelassa, Warner J. Venstra, Herre S. J. van der Zant, Andrea D. Caviglia

Abstract: Strain engineering is one of the most effective approaches to manipulate the physical state of materials, control their electronic properties, and enable crucial functionalities. Because of their rich phase diagrams arising from competing ground states, quantum materials are an ideal playground for on-demand material control, and can be used to develop emergent technologies, such as adaptive elect… ▽ More Strain engineering is one of the most effective approaches to manipulate the physical state of materials, control their electronic properties, and enable crucial functionalities. Because of their rich phase diagrams arising from competing ground states, quantum materials are an ideal playground for on-demand material control, and can be used to develop emergent technologies, such as adaptive electronics or neuromorphic computing. It was recently suggested that complex oxides could bring unprecedented functionalities to the field of nanomechanics, but the possibility of precisely controlling the stress state of materials is so far lacking. Here we demonstrate the wide and reversible manipulation of the stress state of single-crystal WO3 by strain engineering controlled by catalytic hydrogenation. Progressive incorporation of hydrogen in freestanding ultra-thin structures determines large variations of their mechanical resonance frequencies and induces static deformation. Our results demonstrate hydrogen doping as a new paradigm to reversibly manipulate the mechanical properties of nanodevices based on materials control. △ Less

Submitted 15 June, 2021; originally announced June 2021.

Comments: 6 pages, 4 figures, 9 supplementary sections

Journal ref: ACS Appl. Mater. Interfaces 11, 44438 (2019)

Dynamics of 2D Material Membranes

Authors: Peter G. Steeneken, Robin J. Dolleman, Dejan Davidovikj, Farbod Alijani, Herre S. J. van der Zant

Abstract: The dynamics of suspended two-dimensional (2D) materials has received increasing attention during the last decade, yielding new techniques to study and interpret the physics that governs the motion of atomically thin layers. This has led to insights into the role of thermodynamic and nonlinear effects as well as the mechanisms that govern dissipation and stiffness in these resonators. In this revi… ▽ More The dynamics of suspended two-dimensional (2D) materials has received increasing attention during the last decade, yielding new techniques to study and interpret the physics that governs the motion of atomically thin layers. This has led to insights into the role of thermodynamic and nonlinear effects as well as the mechanisms that govern dissipation and stiffness in these resonators. In this review, we present the current state-of-the-art in the experimental study of the dynamics of 2D membranes. The focus will be both on the experimental measurement techniques and on the interpretation of the physical phenomena exhibited by atomically thin membranes in the linear and nonlinear regimes. We will show that resonant 2D membranes have emerged both as sensitive probes of condensed matter physics in ultrathin layers, and as sensitive elements to monitor small external forces or other changes in the environment. New directions for utilizing suspended 2D membranes for material characterization, thermal transport, and gas interactions will be discussed and we conclude by outlining the challenges and opportunities in this upcoming field. △ Less

Submitted 16 May, 2021; originally announced May 2021.

Comments: 39 pages, 16 figures

Journal ref: 2D Mater. 8 042001 (2021)

Integrating van der Waals materials on paper substrates for electrical and optical applications

Authors: Wenliang Zhang, Qinghua Zhao, Carmen Munuera, Martin Lee, Eduardo Flores, João E. F. Rodrigues, Jose R. Ares, Carlos Sanchez, Javier Gainza, Herre S. J. van der Zant, José A. Alonso, Isabel J. Ferrer, Tao Wang, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: Paper holds the promise to replace silicon substrates in applications like internet of things or disposable electronics that require ultra-low-cost electronic components and an environmentally friendly electronic waste management. In the last years, spurred by the abovementioned properties of paper as a substrate and the exceptional electronic, mechanical and optical properties of van der Waals (v… ▽ More Paper holds the promise to replace silicon substrates in applications like internet of things or disposable electronics that require ultra-low-cost electronic components and an environmentally friendly electronic waste management. In the last years, spurred by the abovementioned properties of paper as a substrate and the exceptional electronic, mechanical and optical properties of van der Waals (vdW) materials, many research groups have worked towards the integration of vdW materials-based devices on paper. Recently, a method to deposit a continuous film of densely packed interconnects of vdW materials on paper by simply rubbing the vdW crystals against the rough surface of paper has been presented. This method utilizes the weak interlayer vdW interactions and allows cleaving of the crystals into micro platelets through the abrasion against the paper. Here, we aim to illustrate the general character and the potential of this technique by fabricating films of 39 different vdW materials (including superconductors, semi-metals, semiconductors, and insulators) on standard copier paper. We have thoroughly characterized their optical properties showing their high optical quality: one can easily resolve the absorption band edge of semiconducting vdW materials and even the excitonic features present in some vdW materials with high exciton binding energy. We also measured the electrical resistivity for several vdW materials films on paper finding exceptionally low values, which are in some cases, orders of magnitude lower than those reported for analogous films produced by inkjet printing. We finally demonstrate the fabrication of field-effect devices with vdW materials on paper using the paper substrate as an ionic gate. △ Less

Submitted 7 May, 2021; originally announced May 2021.

Comments: 4 figures in main text, 21 figures in Supp. Info

Journal ref: Applied Materials Today, 23, 101012, 2021

Nanomechanical probing and strain tuning of the Curie temperature in suspended Cr$_2$Ge$_2$Te$_6$ heterostructures

Authors: Makars Šiškins, Samer Kurdi, Martin Lee, Benjamin J. M. Slotboom, Wenyu Xing, Samuel Mañas-Valero, Eugenio Coronado, Shuang Jia, Wei Han, Toeno van der Sar, Herre S. J. van der Zant, Peter G. Steeneken

Abstract: Two-dimensional (2D) magnetic materials with strong magnetostriction are interesting systems for strain-tuning the magnetization, enabling potential for realizing spintronic and nanomagnetic devices. Realizing this potential requires understanding of the magneto-mechanical coupling in the 2D limit. In this work, we suspend thin Cr$_2$Ge$_2$Te$_6$ layers, creating nanomechanical membrane resonators… ▽ More Two-dimensional (2D) magnetic materials with strong magnetostriction are interesting systems for strain-tuning the magnetization, enabling potential for realizing spintronic and nanomagnetic devices. Realizing this potential requires understanding of the magneto-mechanical coupling in the 2D limit. In this work, we suspend thin Cr$_2$Ge$_2$Te$_6$ layers, creating nanomechanical membrane resonators. We probe its mechanical and magnetic properties as a function of temperature and strain. Pronounced signatures of magneto-elastic coupling are observed in the temperature-dependent resonance frequency of these membranes near $T_{\rm C}$. We further utilize Cr$_2$Ge$_2$Te$_6$ in heterostructures with thin layers of WSe$_2$ and FePS$_3$, which have positive thermal expansion coefficients, to compensate the negative thermal expansion coefficient of Cr$_2$Ge$_2$Te$_6$ and quantitatively probe the corresponding $T_{\rm C}$. Finally, we induce a strain of $0.016\%$ in a suspended heterostructure via electrostatic force and demonstrate a resulting enhancement of $T_{\rm C}$ by $2.5 \pm 0.6$ K in the absence of an external magnetic field. △ Less

Submitted 9 November, 2021; v1 submitted 19 April, 2021; originally announced April 2021.

Drawing WS2 thermal sensors on paper substrates

Authors: Martin Lee, Ali Mazaheri, Herre S. J. van der Zant, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: Paper based thermoresistive sensors are fabricated by rubbing WS2 powder against a piece of standard copier paper, like the way a pencil is used to write on paper. The abrasion between the layered material and the rough paper surface erodes the material, breaking the weak van der Waals interlayer bonds, yielding a film of interconnected platelets. The resistance of WS2 presents a strong temperatur… ▽ More Paper based thermoresistive sensors are fabricated by rubbing WS2 powder against a piece of standard copier paper, like the way a pencil is used to write on paper. The abrasion between the layered material and the rough paper surface erodes the material, breaking the weak van der Waals interlayer bonds, yielding a film of interconnected platelets. The resistance of WS2 presents a strong temperature dependence, as expected for a semiconductor material in which charge transport is due to thermally activated carriers. This strong temperature dependence makes the paper supported WS2 devices extremely sensitive to small changes in temperature. This exquisite thermal sensitivity, and their fast response times to sudden temperature changes, is exploited thereby demonstrating the usability of a WS2-on-paper thermal sensor in a respiration monitoring device. △ Less

Submitted 24 October, 2020; originally announced October 2020.

Comments: 6 main text figures, 1 table, 6 supp. info. figures

Semi-permeability of graphene nanodrums in sucrose solution

Authors: Robin J. Dolleman, Allard J. Katan, Herre S. J. van der Zant, Peter G. Steeneken

Abstract: Semi-permeable membranes are important elements in water purification and energy generation applications, for which the atomic thickness and strength of graphene can enhance efficiency and permeation rate while maintaining good selectivity. Here, we show that an osmotic pressure difference forms across a suspended graphene membrane as a response to a sucrose concentration difference, providing evi… ▽ More Semi-permeable membranes are important elements in water purification and energy generation applications, for which the atomic thickness and strength of graphene can enhance efficiency and permeation rate while maintaining good selectivity. Here, we show that an osmotic pressure difference forms across a suspended graphene membrane as a response to a sucrose concentration difference, providing evidence for its semi-permeability. This osmotic pressure difference is detected via the deflection of the graphene membrane that is measured by atomic force microscopy. Using this technique, the time dependence of this deflection allows us to measure the water permeation rate of a single 3.4 $μ$m diameter graphene membrane. Its value is close to the expected value of a single nanopore in graphene. The method thus allows one to experimentally study the semi-permeability of graphene membranes at the microscale when the leakage rate is miniscule. It can therefore find use in the development of graphene membranes for filtration, and can enable sensors that measure the concentration and composition of solutions. △ Less

Submitted 8 September, 2020; originally announced September 2020.

Nanoelectromechanical Sensors based on Suspended 2D Materials

Authors: Max C. Lemme, Stefan Wagner, Kangho Lee, Xuge Fan, Gerard J. Verbiest, Sebastian Wittmann, Sebastian Lukas, Robin J. Dolleman, Frank Niklaus, Herre S. J. van der Zant, Georg S. Duesberg, Peter G. Steeneken

Abstract: The unique properties and atomic thickness of two-dimensional (2D) materials enable smaller and better nanoelectromechanical sensors with novel functionalities. During the last decade, many studies have successfully shown the feasibility of using suspended membranes of 2D materials in pressure sensors, microphones, accelerometers, and mass and gas sensors. In this review, we explain the different… ▽ More The unique properties and atomic thickness of two-dimensional (2D) materials enable smaller and better nanoelectromechanical sensors with novel functionalities. During the last decade, many studies have successfully shown the feasibility of using suspended membranes of 2D materials in pressure sensors, microphones, accelerometers, and mass and gas sensors. In this review, we explain the different sensing concepts and give an overview of the relevant material properties, fabrication routes, and device operation principles. Finally, we discuss sensor readout and integration methods and provide comparisons against the state of the art to show both the challenges and promises of 2D material-based nanoelectromechanical sensing. △ Less

Submitted 23 July, 2020; originally announced July 2020.

Comments: Review paper

Journal ref: Research, vol. 2020, Article ID 8748602

Tunable Photodetectors via in situ Thermal Conversion of TiS$_3$ to TiO$_2$

Authors: Foad Ghasemi, Riccardo Frisenda, Eduardo Flores, Nikos Papadopoulos, Robert Biele, David Perez de Lara, Herre S. J. van der Zant, Kenji Watanabe, Takashi Taniguchi, Roberto D'Agosta, Jose R. Ares, Carlos Sánchez, Isabel J. Ferrer, Andres Castellanos-Gomez

Abstract: In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the possibility to widely tune the band structure of 2D materials. In particular, we demonstrate the controlled oxidation of titanium trisulfide (TiS$_3$), a layered semi… ▽ More In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the possibility to widely tune the band structure of 2D materials. In particular, we demonstrate the controlled oxidation of titanium trisulfide (TiS$_3$), a layered semiconductor that has attracted much attention recently thanks to its quasi-1D electronic and optoelectronic properties and its direct bandgap of 1.1 eV. Heating TiS$_3$ in air above 300 °C gradually converts it into TiO$_2$, a semiconductor with a wide bandgap of 3.2 eV with ap-plications in photo-electrochemistry and catalysis. In this work, we investigate the controlled thermal oxidation of individual TiS$_3$ nanoribbons and its influence on the optoelectronic properties of TiS$_3$-based photodetectors. We observe a step-wise change in the cut-off wavelength from its pristine value ~1000 nm to 450 nm after subjecting the TiS$_3$ devices to subsequent thermal treatment cycles. Ab-initio and many-body calculations confirm an increase in the bandgap of titanium oxysulfide (TiO$_{2-x}$S$_x$) when increasing the amount of oxygen and reducing the amount of sulfur. △ Less

Submitted 11 June, 2020; originally announced June 2020.

Comments: 7 figures in main text, 9 figures in supp. info

Journal ref: Nanomaterials, 10(4), 711, 2020

MoS$_2$-on-paper optoelectronics: drawing photodetectors with van der Waals semiconductors beyond graphite

Authors: Ali Mazaheri, Martin Lee, Herre S. J. van der Zant, Riccardo Frisenda, Andres Castellanos-Gomez

Abstract: We fabricate paper-supported semiconducting devices by rubbing a layered molybdenum disulfide (MoS2) crystal onto a piece of paper, similarly to the action of drawing/writing with a pencil on paper. We show that the abrasion between the MoS2 crystal and the paper substrate efficiently exfoliates the crystals, breaking the weak van der Waals interlayer bonds and leading to the deposition of a film… ▽ More We fabricate paper-supported semiconducting devices by rubbing a layered molybdenum disulfide (MoS2) crystal onto a piece of paper, similarly to the action of drawing/writing with a pencil on paper. We show that the abrasion between the MoS2 crystal and the paper substrate efficiently exfoliates the crystals, breaking the weak van der Waals interlayer bonds and leading to the deposition of a film of interconnected MoS2 platelets. Employing this simple method, that can be easily extended to other 2D materials, we fabricate MoS2-on-paper broadband photodectectors with spectral sensitivity from the ultraviolet (UV) to the near-infrared (NIR). We also used these paper-based photodetectors to acquire pictures of objects by mounting the photodetectors in a homebuilt single-pixel camera setup. △ Less

Submitted 11 June, 2020; v1 submitted 3 May, 2020; originally announced May 2020.

Comments: 6 main text figures + 4 Supp Info figures

Single-Material Graphene Thermocouples

Authors: Achim Harzheim, Fabian Könemann, Bernd Gotsmann, Herre van der Zant, Pascal Gehring

Abstract: On-chip temperature sensing on a micro- to nanometer scale is becoming more desirable as the complexity of nanodevices and size requirements increase and with it the challenges in thermal probing and management. This highlights the need for scalable and reliable temperature sensors which have the potential to be incorporated into current and future device structures. Here, we show that U-shaped gr… ▽ More On-chip temperature sensing on a micro- to nanometer scale is becoming more desirable as the complexity of nanodevices and size requirements increase and with it the challenges in thermal probing and management. This highlights the need for scalable and reliable temperature sensors which have the potential to be incorporated into current and future device structures. Here, we show that U-shaped graphene stripes consisting of one wide and one narrow leg form a single material thermocouple that can function as a self-powering temperature sensor. We find that the graphene thermocouples increase in sensitivity with a decrease in leg width, due to a change in the Seebeck coefficient, which is in agreement with our previous findings and report a maximum sensitivity of $ΔS \approx$ 39 $\mathrmμ$V/K. △ Less

Submitted 13 April, 2020; originally announced April 2020.

Comments: 7 pages, 4 figures

Journal ref: Advanced Functional Materials, 2020, 2000574

Sensitive capacitive pressure sensors based on graphene membrane arrays

Authors: Makars Šiškins, Martin Lee, Dominique Wehenkel, Richard van Rijn, Tijmen W. de Jong, Johannes R. Renshof, Berend C. Hopman, Willemijn S. J. M. Peters, Dejan Davidovikj, Herre S. J. van der Zant, Peter G. Steeneken

Abstract: The high flexibility, impermeability and strength of graphene membranes are key properties that can enable the next generation of nanomechanical sensors. However, for capacitive pressure sensors the sensitivity offered by a single suspended graphene membrane is too small to compete with commercial sensors. Here, we realize highly sensitive capacitive pressure sensors consisting of arrays of nearly… ▽ More The high flexibility, impermeability and strength of graphene membranes are key properties that can enable the next generation of nanomechanical sensors. However, for capacitive pressure sensors the sensitivity offered by a single suspended graphene membrane is too small to compete with commercial sensors. Here, we realize highly sensitive capacitive pressure sensors consisting of arrays of nearly ten thousand small, freestanding double-layer graphene membranes. We fabricate large arrays of small diameter membranes using a procedure that maintains the superior material and mechanical properties of graphene, even after high-temperature anneals. These sensors are readout using a low cost battery-powered circuit board, with a responsivity of up to 47.8 aF Pa$^{-1}$ mm$^{-2}$, thereby outperforming commercial sensors. △ Less

Submitted 19 March, 2020; originally announced March 2020.

Graphene Effusion-based Gas Sensor

Authors: Irek E. Rosłoń, Robin J. Dolleman, Hugo Licona, Martin Lee, Makars Šiškins, Henning Lebius, Lukas Madauß, Marika Schleberger, Farbod Alijani, Herre S. J. van der Zant, Peter G. Steeneken

Abstract: Porous, atomically thin graphene membranes have interesting properties for filtration and sieving applications because they can accommodate small pore sizes, while maintaining high permeability. These membranes are therefore receiving much attention for novel gas and water purification applications. Here we show that the atomic thickness and high resonance frequency of porous graphene membranes en… ▽ More Porous, atomically thin graphene membranes have interesting properties for filtration and sieving applications because they can accommodate small pore sizes, while maintaining high permeability. These membranes are therefore receiving much attention for novel gas and water purification applications. Here we show that the atomic thickness and high resonance frequency of porous graphene membranes enables an effusion based gas sensing method that distinguishes gases based on their molecular mass. Graphene membranes are used to pump gases through nanopores using optothermal forces. By monitoring the time delay between the actuation force and the membrane mechanical motion, the permeation time-constants of various gases are shown to be significantly different. The measured linear relation between the effusion time constant and the square root of the molecular mass provides a method for sensing gases based on their molecular mass. The presented microscopic effusion based gas sensor can provide a small, low-power alternative for large, high-power, mass-spectrometry and optical spectrometry based gas sensing methods. △ Less

Submitted 26 January, 2020; originally announced January 2020.

Comments: 12 pages

Magnetic and electronic phase transitions probed by nanomechanical resonance

Authors: Makars Šiškins, Martin Lee, Samuel Mañas-Valero, Eugenio Coronado, Yaroslav M. Blanter, Herre S. J. van der Zant, Peter G. Steeneken

Abstract: Two-dimensional (2D) materials enable new types of magnetic and electronic phases mediated by their reduced dimensionality like magic-angle induced phase transitions, 2D Ising antiferromagnets and ferromagnetism in 2D atomic layers and heterostructures. However, only a few methods are available to study these phase transitions, which for example is particularly challenging for antiferromagnetic ma… ▽ More Two-dimensional (2D) materials enable new types of magnetic and electronic phases mediated by their reduced dimensionality like magic-angle induced phase transitions, 2D Ising antiferromagnets and ferromagnetism in 2D atomic layers and heterostructures. However, only a few methods are available to study these phase transitions, which for example is particularly challenging for antiferromagnetic materials. Here, we demonstrate that these phases can be probed by the mechanical motion: the temperature dependent resonance frequency and quality factor of multilayer 2D material membranes show clear anomalies near the phase transition temperature, which are correlated to anomalies in the specific heat of the materials. The observed coupling of mechanical degrees of freedom to magnetic and electronic order is attributed to thermodynamic relations that are not restricted to van der Waals materials. Nanomechanical resonators, therefore, offer the potential to characterize phase transitions in a wide variety of materials, including those that are antiferromagnetic, insulating or so thin that conventional bulk characterization methods become unsuitable. △ Less

Submitted 19 November, 2019; originally announced November 2019.

Trapping and electrical characterization of single core/shell iron-based nanoparticles in self-aligned nanogaps

Authors: Jacqueline Labra-Muñoz, Zorica Konstantinovic, Lluis Balcells, Alberto Pomar, Herre S. J. Van der Zant, Diana Dulić

Abstract: We report on the fabrication and measurements of platinum-self-aligned nanogap devices containing cubed iron (core)/iron oxide (shell) nanoparticles (NPs) with two average different sizes (13 and 17 nm). The nanoparticles are deposited by means of a cluster gun technique. Their trapping across the nanogap is demonstrated by comparing the current vs voltage characteristics (I-Vs) before and after t… ▽ More We report on the fabrication and measurements of platinum-self-aligned nanogap devices containing cubed iron (core)/iron oxide (shell) nanoparticles (NPs) with two average different sizes (13 and 17 nm). The nanoparticles are deposited by means of a cluster gun technique. Their trapping across the nanogap is demonstrated by comparing the current vs voltage characteristics (I-Vs) before and after the deposition. At low temperature, the I-Vs can be well fitted to the Korotkov and Nazarov Coulomb blockade model, which captures the coexistence of single-electron tunneling and tunnel barrier suppression upon a bias voltage increase. The measurements thus show that Coulomb-blockaded devices can be made with a nanoparticle cluster source, which extends the existing possibilities to fabricate such devices to those in which it is very challenging to reduce the usual NP agglomeration given by a solution method. △ Less

Submitted 12 November, 2019; v1 submitted 18 October, 2019; originally announced October 2019.

Comments: (Figure 3d was updated) This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 115, 063104 (2019) and may be found at https://doi.org/10.1063/1.5094352

Journal ref: Appl. Phys. Lett. 115, 063104 (2019)

Ultrathin complex oxide nanomechanical resonators

Authors: Dejan Davidovikj, Dirk J. Groenendijk, Ana Mafalda R. V. L. Monteiro, Andrew Dijkhoff, Dmytro Afanasiev, Herre S. J. van der Zant, Yingkai Huang, Erik van Heumen, Andrea D. Caviglia, Peter G. Steeneken

Abstract: Complex oxide thin films and heterostructures exhibit a profusion of exotic phenomena, often resulting from the intricate interplay between film and substrate. Recently it has become possible to isolate epitaxially grown single-crystalline layers of these materials, enabling the study of their properties in the absence of interface effects. In this work, we create ultrathin membranes of strongly c… ▽ More Complex oxide thin films and heterostructures exhibit a profusion of exotic phenomena, often resulting from the intricate interplay between film and substrate. Recently it has become possible to isolate epitaxially grown single-crystalline layers of these materials, enabling the study of their properties in the absence of interface effects. In this work, we create ultrathin membranes of strongly correlated materials and demonstrate top-down fabrication of nanomechanical resonators made out of \ce{SrTiO3} and \ce{SrRuO3}. Using laser interferometry, we successfully actuate and measure the motion of the nanodrum resonators. By measuring their temperature-dependent mechanical response, we observe signatures of structural phase transitions in \ce{SrTiO3}, which affect the strain and mechanical dissipation in the resonators. This approach can be extended to investigate phase transitions in a wide range of materials. Our study demonstrates the feasibility of integrating ultrathin complex oxide membranes for realizing nanoelectromechanical systems on arbitrary substrates. △ Less

Submitted 30 April, 2019; originally announced May 2019.

Investigating laser induced phase engineering in MoS2 transistors

Authors: Nikos Papadopoulos, Joshua O. Island, Herre S. J. van der Zant, Gary A. Steele

Abstract: Phase engineering of MoS2 transistors has recently been demonstrated and has led to record low contact resistances. The phase patterning of MoS2 flakes with laser radiation has also been realized via spectroscopic methods, which invites the potential of controlling the metallic and semiconducting phases of MoS2 transistors by simple light exposure. Nevertheless, the fabrication and demonstration o… ▽ More Phase engineering of MoS2 transistors has recently been demonstrated and has led to record low contact resistances. The phase patterning of MoS2 flakes with laser radiation has also been realized via spectroscopic methods, which invites the potential of controlling the metallic and semiconducting phases of MoS2 transistors by simple light exposure. Nevertheless, the fabrication and demonstration of laser patterned MoS2 devices starting from the metallic polymorph has not been demonstrated yet. Here, we study the effects of laser radiation on 1T/1T'-MoS2 transistors with the prospect of driving an in-situ phase transition to the 2H-polymorph through light exposure. We find that although the Raman peaks of 2H-MoS2 become more prominent and the ones from the 1T/1T' phase fade after the laser exposure, the semiconducting properties of the laser patterned devices are not fully restored and the laser treatment ultimately leads to degradation of the transport channel. △ Less

Submitted 27 September, 2018; originally announced September 2018.

Journal ref: IEEE Transactions on Electron Devices, pp. 1-6, 2018

Massively parallel fabrication of crack-defined gold break junctions featuring sub-3 nm gaps for molecular devices

Authors: Valentin Dubois, Shyamprasad N. Raja, Pascal Gehring, Sabina Caneva, Herre S. J. van der Zant, Frank Niklaus, Göran Stemme

Abstract: Break junctions provide tip-shaped contact electrodes that are fundamental components of nano and molecular electronics. However, the fabrication of break junctions remains notoriously time-consuming and difficult to parallelize. Here we demonstrate true parallel fabrication of gold break junctions featuring sub-3 nm gaps on the wafer-scale, by relying on a novel self-breaking mechanism based on c… ▽ More Break junctions provide tip-shaped contact electrodes that are fundamental components of nano and molecular electronics. However, the fabrication of break junctions remains notoriously time-consuming and difficult to parallelize. Here we demonstrate true parallel fabrication of gold break junctions featuring sub-3 nm gaps on the wafer-scale, by relying on a novel self-breaking mechanism based on controlled crack formation in notched bridge structures. We achieve fabrication densities as high as 7 million junctions per cm$^{2}$, with fabrication yields of around 7% for obtaining crack-defined break junctions with sub-3 nm gaps of fixed gap width that exhibit electron tunneling. We also form molecular junctions using dithiol-terminated oligo(phenylene ethynylene) (OPE3) to demonstrate the feasibility of our approach for electrical probing of molecules down to liquid helium temperatures. Our technology opens a whole new range of experimental opportunities for nano and molecular electronics applications, by enabling very large-scale fabrication of solid-state break junctions. △ Less

Submitted 3 September, 2018; v1 submitted 22 May, 2018; originally announced May 2018.

Comments: includes supporting information, 7 Figures in main text, 7 Figures in supporting information, compilation of images in supporting information

Journal ref: Nature Communications, volume 9, Article number 3433 (2018)

Very large scale characterization of graphene mechanical devices using a colorimetry technique

Authors: Santiago Jose Cartamil-Bueno, Alba Centeno, Amaia Zurutuza, Peter Gerard Steeneken, Herre Sjoerd Jan van der Zant, Samer Houri

Abstract: We use a scalable optical technique to characterize more than 21000 circular nanomechanical devices made out of suspended single- and double-layer graphene on cavities with different diameters ($D$) and depths ($g$). To maximize the contrast between suspended and broken membranes we used a model for selecting the optimal color filter. The method enables parallel and automatized image processing fo… ▽ More We use a scalable optical technique to characterize more than 21000 circular nanomechanical devices made out of suspended single- and double-layer graphene on cavities with different diameters ($D$) and depths ($g$). To maximize the contrast between suspended and broken membranes we used a model for selecting the optimal color filter. The method enables parallel and automatized image processing for yield statistics. We find the survival probability to be correlated to a structural mechanics scaling parameter given by $D^4/g^3$. Moreover, we extract a median adhesion energy of $Γ=$ 0.9 J/m$^2$ between the membrane and the native SiO$_2$ at the bottom of the cavities. △ Less

Submitted 3 May, 2018; originally announced May 2018.

Comments: 7 pages, 5 figures

Journal ref: Nanoscale, 2017,9, 7559-7564

Graphene mechanical pixels for Interferometric MOdulator Displays (GIMOD)

Authors: Santiago J. Cartamil-Bueno, Dejan Davidovikj, Alba Centeno, Amaia Zurutuza, Herre S. J. van der Zant, Peter G. Steeneken, Samer Houri

Abstract: Graphene, the carbon monolayer and 2D allotrope of graphite, has the potential to impact technology with a wide range of applications such as optical modulators for high-speed communications. In contrast to modulation devices that rely on plasmonic or electronic effects, MEMS-based modulators can have wider tuning ranges albeit at a lower operating frequency. These properties make electro-optic me… ▽ More Graphene, the carbon monolayer and 2D allotrope of graphite, has the potential to impact technology with a wide range of applications such as optical modulators for high-speed communications. In contrast to modulation devices that rely on plasmonic or electronic effects, MEMS-based modulators can have wider tuning ranges albeit at a lower operating frequency. These properties make electro-optic mechanical modulators ideal for reflective-type display technologies as has been demonstrated previously with SiN membranes in Interferometric MOdulator Displays (IMODs). Despite their low-power consumption and performance in bright environments, IMODs suffer from low frame rates and limited color gamut. Double-layer graphene (DLG) membranes grown by chemical vapor deposition (CVD) can also recreate the interference effect like in IMODs as proven with drumheads displaying Newton's rings. Here, we report on the electro-optical response of CVD DLG mechanical pixels by measuring the change in wavelength-dependent reflectance of a suspended graphene drumhead as a function of electrical gating. We use a spectrometer to measure the wavelength spectrum at different voltages, and find a good agreement with a model based on light interference. Moreover, to verify that gas compression effects do not play an important role, we use a stroboscopic illumination technique to study the electro-optic response of these graphene pixels at frequencies up to 400 Hz. Based on these findings, we demonstrate a continuous full-spectrum reflective-type pixel technology with a Graphene Interferometric MOdulator Display (GIMOD) prototype of 2500 pixels per inch (ppi) equivalent to more than 12K resolution. △ Less

Submitted 5 March, 2018; originally announced March 2018.

Comments: 13 pages, 4 figures

Graphene gas pumps

Authors: Dejan Davidovikj, Damian Bouwmeester, Herre S. J. van der Zant, Peter G. Steeneken

Abstract: We report on the development of a pneumatically coupled graphene membrane system, comprising of two circular cavities connected by a narrow trench. Both cavities and the trench are covered by a thin few-layer graphene membrane to form a sealed dumbbell shaped chamber. Local electrodes at the bottom of each cavity allow for actuation of each membrane separately, enabling electrical control and mani… ▽ More We report on the development of a pneumatically coupled graphene membrane system, comprising of two circular cavities connected by a narrow trench. Both cavities and the trench are covered by a thin few-layer graphene membrane to form a sealed dumbbell shaped chamber. Local electrodes at the bottom of each cavity allow for actuation of each membrane separately, enabling electrical control and manipulation of the gas flow inside the channel. Using laser interferometry, we measure the displacement of each drum at atmospheric pressure, as a function of the frequency of the electrostatic driving force and provide a proof-of-principle of using graphene membranes to pump attolitre quantities of gases at the nanoscale. △ Less

Submitted 23 January, 2018; originally announced January 2018.

Journal ref: Proceedings IEEE MEMS 2018

Charge transport through a single molecule of trans-1-bis-diazofluorene [60]fullerene

Authors: Davide Stefani, Cristian A. Gutiérrez-Cerón, Daniel Aravena, Jacqueline Labra-Muñoz, Catalina Suarez, Shuming Liu, Monica Soler, Luis Echegoyen, Herre S. J. van der Zant, Diana Dulic

Abstract: Fullerenes have attracted interest for their possible applications in various electronic, biological, and optoelectronic devices. However, for efficient use in such devices, a suitable anchoring group has to be employed that forms well-defined and stable contacts with the electrodes. In this work, we propose a novel fullerene tetramalonate derivate functionalized with trans-1 4,5-diazafluorene anc… ▽ More Fullerenes have attracted interest for their possible applications in various electronic, biological, and optoelectronic devices. However, for efficient use in such devices, a suitable anchoring group has to be employed that forms well-defined and stable contacts with the electrodes. In this work, we propose a novel fullerene tetramalonate derivate functionalized with trans-1 4,5-diazafluorene anchoring groups. The conductance of single-molecule junctions, investigated in two different setups with the mechanically controlled break junction technique, reveals the formation of molecular junctions at three conductance levels. We attribute the conductance peaks to three binding modes of the anchoring groups to the gold electrodes. Density functional theory calculations confirm the existence of multiple binding configurations and calculated transmission functions are consistent with experimentally determined conductance values. △ Less

Submitted 1 October, 2017; originally announced October 2017.

Comments: 22 pages, 6 figures

Journal ref: Chem. Mater. 2017, 29 (17), 7305-7312

Static capacitive pressure sensing using a single graphene drum

Authors: Dejan Davidovikj, Paul H. Scheepers, Herre S. J. van der Zant, Peter G. Steeneken

Abstract: To realize nanomechanical graphene-based pressure and gas sensors, it is beneficial to have a method to electrically readout the static displacement of a suspended graphene membrane. Capacitive readout, typical in micro-electro-mechanical systems (MEMS), gets increasingly challenging as one starts shrinking the dimensions of these devices, since the expected responsivity of such devices is below 0… ▽ More To realize nanomechanical graphene-based pressure and gas sensors, it is beneficial to have a method to electrically readout the static displacement of a suspended graphene membrane. Capacitive readout, typical in micro-electro-mechanical systems (MEMS), gets increasingly challenging as one starts shrinking the dimensions of these devices, since the expected responsivity of such devices is below 0.1 aF/Pa. To overcome the challenges of detecting small capacitance changes, we design an electrical readout device fabricated on top of an insulating quartz substrate, maximizing the contribution of the suspended membrane to the total capacitance of the device. The capacitance of the drum is further increased by reducing the gap size to 110 nm. Using external pressure load, we demonstrate successful detection of capacitance changes of a single graphene drum down to 50 aF, and pressure differences down to 25 mbar. △ Less

Submitted 20 August, 2017; originally announced August 2017.

Long-range Scanning Tunneling Microscope for the study of nanostructures on insulating substrates

Authors: Aday Molina-Mendoza, José Gabriel Rodrigo, Joshua Island, Enrique Burzuri, Gabino Rubio-Bollinger, Herre S. J. van der Zant, Nicolás Agraït

Abstract: The Scanning Tunneling Microscope is a powerful tool for studying the electronic properties at the atomic level, however it's relatively small scanning range and the fact that it can only operate on conducting samples prevents its application to study heterogeneous samples consisting on conducting and insulating regions. Here we present a long-range scanning tunneling microscope capable of detecti… ▽ More The Scanning Tunneling Microscope is a powerful tool for studying the electronic properties at the atomic level, however it's relatively small scanning range and the fact that it can only operate on conducting samples prevents its application to study heterogeneous samples consisting on conducting and insulating regions. Here we present a long-range scanning tunneling microscope capable of detecting conducting micro and nanostructures on insulating substrates using a technique based on the capacitance between the tip and the sample and performing STM studies. △ Less

Submitted 23 October, 2013; v1 submitted 20 September, 2013; originally announced September 2013.

Comments: 3 pages, 7 figures

Coupling carbon nanotube mechanics to a superconducting circuit

Authors: B. H. Schneider, S. Etaki, H. S. J. van der Zant, G. A. Steele

Abstract: The quantum behaviour of mechanical resonators is a new and emerging field driven by recent experiments reaching the quantum ground state. The high frequency, small mass, and large quality-factor of carbon nanotube resonators make them attractive for quantum nanomechanical applications. A common element in experiments achieving the resonator ground state is a second quantum system, such as coheren… ▽ More The quantum behaviour of mechanical resonators is a new and emerging field driven by recent experiments reaching the quantum ground state. The high frequency, small mass, and large quality-factor of carbon nanotube resonators make them attractive for quantum nanomechanical applications. A common element in experiments achieving the resonator ground state is a second quantum system, such as coherent photons or superconducting device, coupled to the resonators motion. For nanotubes, however, this is a challenge due to their small size. Here, we couple a carbon nanoelectromechanical (NEMS) device to a superconducting circuit. Suspended carbon nanotubes act as both superconducting junctions and moving elements in a Superconducting Quantum Interference Device (SQUID). We observe a strong modulation of the flux through the SQUID from displacements of the nanotube. Incorporating this SQUID into superconducting resonators and qubits should enable the detection and manipulation of nanotube mechanical quantum states at the single-phonon level. △ Less

Submitted 7 September, 2012; originally announced September 2012.

Journal ref: Scientific Reports 2, 599 (2012)

Mechanical systems in the quantum regime

Authors: Menno Poot, Herre S. J. van der Zant

Abstract: Mechanical systems are ideal candidates for studying quantumbehavior of macroscopic objects. To this end, a mechanical resonator has to be cooled to its ground state and its position has to be measured with great accuracy. Currently, various routes to reach these goals are being explored. In this review, we discuss different techniques for sensitive position detection and we give an overview of th… ▽ More Mechanical systems are ideal candidates for studying quantumbehavior of macroscopic objects. To this end, a mechanical resonator has to be cooled to its ground state and its position has to be measured with great accuracy. Currently, various routes to reach these goals are being explored. In this review, we discuss different techniques for sensitive position detection and we give an overview of the cooling techniques that are being employed. The latter include sideband cooling and active feedback cooling. The basic concepts that are important when measuring on mechanical systems with high accuracy and/or at very low temperatures, such as thermal and quantum noise, linear response theory, and backaction, are explained. From this, the quantum limit on linear position detection is obtained and the sensitivities that have been achieved in recent opto and nanoelectromechanical experiments are compared to this limit. The mechanical resonators that are used in the experiments range from meter-sized gravitational wave detectors to nanomechanical systems that can only be read out using mesoscopic devices such as single-electron transistors or superconducting quantum interference devices. A special class of nanomechanical systems are bottom-up fabricated carbon-based devices, which have very high frequencies and yet a large zero-point motion, making them ideal for reaching the quantum regime. The mechanics of some of the different mechanical systems at the nanoscale is studied. We conclude this review with an outlook of how state-of-the-art mechanical resonators can be improved to study quantum {\it mechanics}. △ Less

Submitted 12 October, 2011; v1 submitted 10 June, 2011; originally announced June 2011.

Comments: To appear in Phys. Rep

Journal ref: Physics Reports 511 (5) 273-335 (2012)

Magnetomotive drive and detection of clamped-clamped mechanical resonators in water

Authors: W. J. Venstra, H. J. R. Westra, K. Babaei Gavan, H. S. J. van der Zant

Abstract: We demonstrate magnetomotive drive and detection of doubly clamped string resonators in water. A compact 1.9 T permanent magnet is used to detect the fundamental and higher flexural modes of $\mathrm{200 μm}$ long resonators. Good agreement is found between the magnetomotive measurements and optical measurements performed on the same resonator. The magnetomotive detection scheme can be used to s… ▽ More We demonstrate magnetomotive drive and detection of doubly clamped string resonators in water. A compact 1.9 T permanent magnet is used to detect the fundamental and higher flexural modes of $\mathrm{200 μm}$ long resonators. Good agreement is found between the magnetomotive measurements and optical measurements performed on the same resonator. The magnetomotive detection scheme can be used to simultaneously drive and detect multiple sensors or scanning probes in viscous fluids without alignment of detector beams. △ Less

Submitted 14 January, 2010; originally announced January 2010.

Comments: 4 pages, 3 figures

Journal ref: Appl. Phys. Lett. 95, 263103 (2009)

Efficient readout of micromechanical resonator arrays in ambient conditions

Authors: W. J. Venstra, H. S. J. van der Zant

Abstract: We present a method for efficient spectral readout of mechanical resonator arrays in dissipative environments. Magnetomotive drive and detection is used to drive double clamped resonators in the nonlinear regime. Resonators with almost identical resonance frequencies can be tracked individually by sweeping the drive power. Measurements are performed at room temperature and atmospheric pressure.… ▽ More We present a method for efficient spectral readout of mechanical resonator arrays in dissipative environments. Magnetomotive drive and detection is used to drive double clamped resonators in the nonlinear regime. Resonators with almost identical resonance frequencies can be tracked individually by sweeping the drive power. Measurements are performed at room temperature and atmospheric pressure. These conditions enable application in high throughput resonant sensor arrays. △ Less

Submitted 6 June, 2009; originally announced June 2009.

Comments: 4 pages, 4 figures

Journal ref: Appl.Phys.Lett.93:234106,2008