-
SolTrack: a free, fast and accurate routine to compute the position of the Sun
Authors:
Marc van der Sluys,
Paul van Kan
Abstract:
We present a simple, free, fast and accurate C/C++ and Python routine called SolTrack, which can compute the position of the Sun at any instant and any location on Earth. The code allows tracking of the Sun using a low-specs embedded processor, such as a PLC or a microcontroller, and can be used for applications in the field of (highly) concentrated (photovoltaic) solar power ((H)CPV and CSP), suc…
▽ More
We present a simple, free, fast and accurate C/C++ and Python routine called SolTrack, which can compute the position of the Sun at any instant and any location on Earth. The code allows tracking of the Sun using a low-specs embedded processor, such as a PLC or a microcontroller, and can be used for applications in the field of (highly) concentrated (photovoltaic) solar power ((H)CPV and CSP), such as tracking control and yield modelling. SolTrack is accurate, fast and open in its use, and compares favourably with similar algorithms that are currently available for solar tracking and modelling. SolTrack computes $1.5 \times 10^6$ positions per second on a single 2.67GHz CPU core. For the period between the years 2017 and 2116 the uncertainty in position is $0.0036 \pm 0.0042^\circ$, that in solar distance 0.0017 $\pm$ 0.0029%. In addition, SolTrack computes rise, transit and set times to an accuracy better than 1 second. The code is freely available online (http://soltrack.sf.net, https://pypi.org/project/soltrack/).
△ Less
Submitted 4 September, 2022;
originally announced September 2022.
-
Why Halley did not discover proper motion and why Cassini did
Authors:
Frank Verbunt,
Marc van der Sluys
Abstract:
In 1717 Halley compared contemporaneous measurements of the latitudes of four stars with earlier measurements by ancient Greek astronomers and by Brahe, and from the differences concluded that these four stars showed proper motion. An analysis with modern methods shows that the data used by Halley do not contain significant evidence for proper motion. What Halley found are the measurement errors o…
▽ More
In 1717 Halley compared contemporaneous measurements of the latitudes of four stars with earlier measurements by ancient Greek astronomers and by Brahe, and from the differences concluded that these four stars showed proper motion. An analysis with modern methods shows that the data used by Halley do not contain significant evidence for proper motion. What Halley found are the measurement errors of Ptolemaios and Brahe. Halley further argued that the occultation of Aldebaran by the Moon on 11 March 509 in Athens confirmed the change in latitude of Aldebaran. In fact, however, the relevant observation was almost certainly made in Alexandria where Aldebaran was not occulted. By carefully considering measurement errors Jacques Cassini showed that Halley's results from comparison with earlier astronomers were spurious, a conclusion partially confirmed by various later authors. Cassini's careful study of the measurements of the latitude of Arcturus provides the first significant evidence for proper motion.
△ Less
Submitted 29 August, 2019;
originally announced September 2019.
-
Advanced Virgo: a 2nd generation interferometric gravitational wave detector
Authors:
F. Acernese,
M. Agathos,
K. Agatsuma,
D. Aisa,
N. Allemandou,
A. Allocca,
J. Amarni,
P. Astone,
G. Balestri,
G. Ballardin,
F. Barone,
J. -P. Baronick,
M. Barsuglia,
A. Basti,
F. Basti,
Th. S. Bauer,
V. Bavigadda,
M. Bejger,
M. G. Beker,
C. Belczynski,
D. Bersanetti,
A. Bertolini,
M. Bitossi,
M. A. Bizouard,
S. Bloemen
, et al. (209 additional authors not shown)
Abstract:
Advanced Virgo is the project to upgrade the Virgo interferometric detector of gravitational waves, with the aim of increasing the number of observable galaxies (and thus the detection rate) by three orders of magnitude. The project is now in an advanced construction phase and the assembly and integration will be completed by the end of 2015. Advanced Virgo will be part of a network with the two A…
▽ More
Advanced Virgo is the project to upgrade the Virgo interferometric detector of gravitational waves, with the aim of increasing the number of observable galaxies (and thus the detection rate) by three orders of magnitude. The project is now in an advanced construction phase and the assembly and integration will be completed by the end of 2015. Advanced Virgo will be part of a network with the two Advanced LIGO detectors in the US and GEO HF in Germany, with the goal of contributing to the early detections of gravitational waves and to opening a new observation window on the universe. In this paper we describe the main features of the Advanced Virgo detector and outline the status of the construction.
△ Less
Submitted 16 October, 2014; v1 submitted 18 August, 2014;
originally announced August 2014.
-
Reconstruction of the gravitational wave signal $h(t)$ during the Virgo science runs and independent validation with a photon calibrator
Authors:
Virgo collaboration,
T. Accadia,
F. Acernese,
M. Agathos,
A. Allocca,
P. Astone,
G. Ballardin,
F. Barone,
M. Barsuglia,
A. Basti,
Th. S. Bauer,
M. Bejger,
M . G. Beker,
C. Belczynski,
D. Bersanetti,
A. Bertolini,
M. Bitossi,
M. A. Bizouard,
M. Blom,
M. Boer,
F. Bondu,
L. Bonelli,
R. Bonnand,
V. Boschi,
L. Bosi
, et al. (171 additional authors not shown)
Abstract:
The Virgo detector is a kilometer-scale interferometer for gravitational wave detection located near Pisa (Italy). About 13 months of data were accumulated during four science runs (VSR1, VSR2, VSR3 and VSR4) between May 2007 and September 2011, with increasing sensitivity.
In this paper, the method used to reconstruct, in the range 10 Hz-10 kHz, the gravitational wave strain time series $h(t)$…
▽ More
The Virgo detector is a kilometer-scale interferometer for gravitational wave detection located near Pisa (Italy). About 13 months of data were accumulated during four science runs (VSR1, VSR2, VSR3 and VSR4) between May 2007 and September 2011, with increasing sensitivity.
In this paper, the method used to reconstruct, in the range 10 Hz-10 kHz, the gravitational wave strain time series $h(t)$ from the detector signals is described. The standard consistency checks of the reconstruction are discussed and used to estimate the systematic uncertainties of the $h(t)$ signal as a function of frequency. Finally, an independent setup, the photon calibrator, is described and used to validate the reconstructed $h(t)$ signal and the associated uncertainties.
The uncertainties of the $h(t)$ time series are estimated to be 8% in amplitude. The uncertainty of the phase of $h(t)$ is 50 mrad at 10 Hz with a frequency dependence following a delay of 8 $μ$s at high frequency. A bias lower than $4\,\mathrm{μs}$ and depending on the sky direction of the GW is also present.
△ Less
Submitted 3 July, 2014; v1 submitted 23 January, 2014;
originally announced January 2014.
-
Parameter estimation for signals from compact binary inspirals injected into LIGO data
Authors:
Marc van der Sluys,
Ilya Mandel,
Vivien Raymond,
Vicky Kalogera,
Christian Roever,
Nelson Christensen
Abstract:
During the fifth science run of the Laser Interferometer Gravitational-wave Observatory (LIGO), signals modelling the gravitational waves emitted by coalescing non-spinning compact-object binaries were injected into the LIGO data stream. We analysed the data segments into which such injections were made using a Bayesian approach, implemented as a Markov-chain Monte-Carlo technique in our code SP…
▽ More
During the fifth science run of the Laser Interferometer Gravitational-wave Observatory (LIGO), signals modelling the gravitational waves emitted by coalescing non-spinning compact-object binaries were injected into the LIGO data stream. We analysed the data segments into which such injections were made using a Bayesian approach, implemented as a Markov-chain Monte-Carlo technique in our code SPINspiral. This technique enables us to determine the physical parameters of such a binary inspiral, including masses and spin, following a possible detection trigger. For the first time, we publish the results of a realistic parameter-estimation analysis of waveforms embedded in real detector noise. We used both spinning and non-spinning waveform templates for the data analysis and demonstrate that the intrinsic source parameters can be estimated with an accuracy of better than 1-3% in the chirp mass and 0.02-0.05 (8-20%) in the symmetric mass ratio if non-spinning waveforms are used. We also find a bias between the injected and recovered parameters, and attribute it to the difference in the post-Newtonian orders of the waveforms used for injection and analysis.
△ Less
Submitted 8 May, 2009;
originally announced May 2009.
-
Degeneracies in Sky Localisation Determination from a Spinning Coalescing Binary through Gravitational Wave Observations: a Markov-Chain Monte-Carlo Analysis for two Detectors
Authors:
V. Raymond,
M. V. van der Sluys,
I. Mandel,
V. Kalogera,
C. Roever,
N. Christensen
Abstract:
Gravitational-wave signals from inspirals of binary compact objects (black holes and neutron stars) are primary targets of the ongoing searches by ground-based gravitational-wave interferometers (LIGO, Virgo, and GEO-600). We present parameter-estimation simulations for inspirals of black-hole--neutron-star binaries using Markov-chain Monte-Carlo methods. As a specific example of the power of th…
▽ More
Gravitational-wave signals from inspirals of binary compact objects (black holes and neutron stars) are primary targets of the ongoing searches by ground-based gravitational-wave interferometers (LIGO, Virgo, and GEO-600). We present parameter-estimation simulations for inspirals of black-hole--neutron-star binaries using Markov-chain Monte-Carlo methods. As a specific example of the power of these methods, we consider source localisation in the sky and analyse the degeneracy in it when data from only two detectors are used. We focus on the effect that the black-hole spin has on the localisation estimation. We also report on a comparative Markov-chain Monte-Carlo analysis with two different waveform families, at 1.5 and 3.5 post-Newtonian order.
△ Less
Submitted 2 April, 2009; v1 submitted 22 December, 2008;
originally announced December 2008.
-
Parameter estimation of spinning binary inspirals using Markov-chain Monte Carlo
Authors:
Marc van der Sluys,
Vivien Raymond,
Ilya Mandel,
Christian Roever,
Nelson Christensen,
Vicky Kalogera,
Renate Meyer,
Alberto Vecchio
Abstract:
We present a Markov-chain Monte-Carlo (MCMC) technique to study the source parameters of gravitational-wave signals from the inspirals of stellar-mass compact binaries detected with ground-based gravitational-wave detectors such as LIGO and Virgo, for the case where spin is present in the more massive compact object in the binary. We discuss aspects of the MCMC algorithm that allow us to sample…
▽ More
We present a Markov-chain Monte-Carlo (MCMC) technique to study the source parameters of gravitational-wave signals from the inspirals of stellar-mass compact binaries detected with ground-based gravitational-wave detectors such as LIGO and Virgo, for the case where spin is present in the more massive compact object in the binary. We discuss aspects of the MCMC algorithm that allow us to sample the parameter space in an efficient way. We show sample runs that illustrate the possibilities of our MCMC code and the difficulties that we encounter.
△ Less
Submitted 12 May, 2008;
originally announced May 2008.
