-
Comparison of computational codes for direct numerical simulations of turbulent Rayleigh-Bénard convection
Authors:
Gijs L. Kooij,
Mikhail A. Botchev,
Edo M. A. Frederix,
Bernard J. Geurts,
Susanne Horn,
Detlef Lohse,
Erwin P. van der Poel,
Olga Shishkina,
Richard J. A. M. Stevens,
Roberto Verzicco
Abstract:
Computational codes for direct numerical simulations of Rayleigh-Bénard (RB) convection are compared in terms of computational cost and quality of the solution. As a benchmark case, RB convection at $Ra=10^8$ and $Pr=1$ in a periodic domain, in cubic and cylindrical containers is considered. A dedicated second-order finite-difference code (AFID/RBflow) and a specialized fourth-order finite-volume…
▽ More
Computational codes for direct numerical simulations of Rayleigh-Bénard (RB) convection are compared in terms of computational cost and quality of the solution. As a benchmark case, RB convection at $Ra=10^8$ and $Pr=1$ in a periodic domain, in cubic and cylindrical containers is considered. A dedicated second-order finite-difference code (AFID/RBflow) and a specialized fourth-order finite-volume code (Goldfish) are compared with a general purpose finite-volume approach (OpenFOAM) and a general purpose spectral-element code (Nek5000). Reassuringly, all codes provide predictions of the average heat transfer that converge to the same values. The computational costs, however, are found to differ considerably. The specialized codes AFID/RBflow and Goldfish are found to excel in efficiency, outperforming the general purpose flow solvers Nek5000 and OpenFOAM by an order of magnitude with an error on the Nusselt number $Nu$ below $5\%$. However, we find that $Nu$ alone is not sufficient to assess the quality of the numerical results: in fact, instantaneous snapshots of the temperature field from a near wall region obtained for deliberately under-resolved simulations using Nek5000 clearly indicate inadequate flow resolution even when $Nu$ is converged. Overall, dedicated special purpose codes for RB convection are found to be more efficient than general purpose codes.
△ Less
Submitted 25 February, 2018;
originally announced February 2018.
-
Mixed insulating and conducting thermal boundary conditions in Rayleigh-Bénard convection
Authors:
Dennis Bakhuis,
Rodolfo Ostilla-Mónico,
Erwin P. van der Poel,
Roberto Verzicco,
Detlef Lohse
Abstract:
A series of direct numerical simulations of Rayleigh-Bénard convection, the flow in a fluid layer heated from below and cooled from above, were conducted to investigate the effect of mixed insulating and conducting boundary conditions on convective flows. Rayleigh numbers between $\text{Ra}=10^7$ and $\text{Ra}=10^9$ were considered, for Prandtl numbers $\text{Pr}=1$ and $\text{Pr}=10$. The bottom…
▽ More
A series of direct numerical simulations of Rayleigh-Bénard convection, the flow in a fluid layer heated from below and cooled from above, were conducted to investigate the effect of mixed insulating and conducting boundary conditions on convective flows. Rayleigh numbers between $\text{Ra}=10^7$ and $\text{Ra}=10^9$ were considered, for Prandtl numbers $\text{Pr}=1$ and $\text{Pr}=10$. The bottom plate was divided into patterns of conducting and insulating stripes. The size ratio between these stripes was fixed to unity and the total number of stripes was varied. Global quantities such as the heat transport and average bulk temperature and local quantities such as the temperature just below the insulating boundary wall were investigated. For the case with the top boundary divided into two halves, one conducting and one insulating, the heat transfer was found to be approximately two thirds of the fully conducting case. Increasing the pattern frequency increased the heat transfer which asymptotically approached the fully conducting case, even if only half of the surface is conducting. Fourier analysis of the temperature field revealed that the imprinted pattern of the plates is diffused in the thermal boundary layers, and cannot be detected in the bulk. With conducting-insulating patterns on both plates, the trends previously described were similar, however, the half-and-half division led to a heat transfer of about a half of the fully conducting case instead of two-thirds. The effect of the ratio of conducting and insulating areas was also analyzed, and it was found that even for systems with a top plate with only $25\%$ conducting surface, heat-transport of $60\%$ of the fully conducting case can be seen. Changing the 1D stripe pattern to 2D checkerboard tessellations does not result in a significantly different response of the system.
△ Less
Submitted 9 October, 2017; v1 submitted 22 February, 2017;
originally announced February 2017.
-
Translational and rotational dynamics of a large buoyant sphere in turbulence
Authors:
Varghese Mathai,
Matthijs W. M. Neut,
Erwin P. van der Poel,
Chao Sun
Abstract:
We report experimental measurements of the translational and rotational dynamics of a large buoyant sphere in isotropic turbulence. We introduce an efficient method to simultaneously determine the position and (absolute) orientation of a spherical body from visual observation. The method employs a minimization algorithm to obtain the orientation from the 2D projection of a specific pattern drawn o…
▽ More
We report experimental measurements of the translational and rotational dynamics of a large buoyant sphere in isotropic turbulence. We introduce an efficient method to simultaneously determine the position and (absolute) orientation of a spherical body from visual observation. The method employs a minimization algorithm to obtain the orientation from the 2D projection of a specific pattern drawn onto the surface of the sphere. This has the advantages that it does not require a database of reference images, is easily scalable using parallel processing, and enables accurate absolute orientation reference. Analysis of the sphere's translational dynamics reveals clear differences between the streamwise and transverse directions. The translational auto-correlations and PDFs provide evidence for periodicity in the particle's dynamics even under turbulent conditions. The angular autocorrelations show weak periodicity. The angular accelerations exhibit wide tails, however without a directional dependence.
△ Less
Submitted 8 March, 2016;
originally announced March 2016.
-
Penetrative internally heated convection in two and three dimensions
Authors:
David Goluskin,
Erwin P. van der Poel
Abstract:
Convection of an internally heated fluid, confined between top and bottom plates of equal temperature, is studied by direct numerical simulation in two and three dimensions. The unstably stratified upper region drives convection that penetrates into the stably stratified lower region. The fraction of produced heat escaping across the bottom plate, which is one half without convection, initially de…
▽ More
Convection of an internally heated fluid, confined between top and bottom plates of equal temperature, is studied by direct numerical simulation in two and three dimensions. The unstably stratified upper region drives convection that penetrates into the stably stratified lower region. The fraction of produced heat escaping across the bottom plate, which is one half without convection, initially decreases as convection strengthens. Entering the turbulent regime, this decrease reverses in two dimensions but continues monotonically in three dimensions. The mean fluid temperature, which grows proportionally to the heating rate ($H$) without convection, grows proportionally to $H^{4/5}$ when convection is strong in both two and three dimensions. The ratio of the heating rate to the fluid temperature is likened to the Nusselt number of Rayleigh-Bénard convection. Simulations are reported for Prandtl numbers between 0.1 and 10 and for Rayleigh numbers (defined in terms of the heating rate) up to $5\times10^{10}$.
△ Less
Submitted 21 January, 2016; v1 submitted 18 November, 2015;
originally announced November 2015.
-
Salinity transfer in bounded double diffusive convection
Authors:
Yantao Yang,
Erwin P. van der Poel,
Rodolfo Ostilla-Mónico,
Chao Sun,
Roberto Verzicco,
Siegfried Grossmann,
Detlef Lohse
Abstract:
The double diffusive convection between two parallel plates is numerically studied for a series of parameters. The flow is driven by the salinity difference and stabilized by the thermal field. Our simulations are directly compared to experiments by Hage and Tilgner (\emph{Phys. Fluids} 22, 076603 (2010)) for several sets of parameters and reasonable agreement is found. This in particular holds fo…
▽ More
The double diffusive convection between two parallel plates is numerically studied for a series of parameters. The flow is driven by the salinity difference and stabilized by the thermal field. Our simulations are directly compared to experiments by Hage and Tilgner (\emph{Phys. Fluids} 22, 076603 (2010)) for several sets of parameters and reasonable agreement is found. This in particular holds for the salinity flux and its dependence on the salinity Rayleigh number. Salt fingers are present in all simulations and extend through the entire height. The thermal Rayleigh number seems to have minor influence on salinity flux but affects the Reynolds number and the morphology of the flow. Next to the numerical calculation, we apply the Grossmann-Lohse theory for Rayleigh-Bénard flow to the current problem without introducing any new coefficients. The theory successfully predicts the salinity flux both with respect to the scaling and even with respect to the absolute value for the numerical and experimental results.
△ Less
Submitted 6 October, 2015;
originally announced October 2015.
-
Logarithmic mean temperature profiles and their connection to plume emissions in turbulent Rayleigh-Bénard convection
Authors:
Erwin P. van der Poel,
Rodolfo Ostilla-Mónico,
Roberto Verzicco,
Siegfried Grossmann,
Detlef Lohse
Abstract:
Two-dimensional simulations of Rayleigh-Bénard convection at $Ra = 5\times10^{10}$ show that vertical logarithmic mean temperature profiles can be observed in regions of the boundary layer where thermal plumes are emitted. The profile is logarithmic only in these regions and not in the rest of the boundary layer where it is sheared by the large scale wind and impacted by plumes. In addition, the l…
▽ More
Two-dimensional simulations of Rayleigh-Bénard convection at $Ra = 5\times10^{10}$ show that vertical logarithmic mean temperature profiles can be observed in regions of the boundary layer where thermal plumes are emitted. The profile is logarithmic only in these regions and not in the rest of the boundary layer where it is sheared by the large scale wind and impacted by plumes. In addition, the logarithmic behavior is not visible in the horizontal average. The findings reveal that the temperature profiles are strongly connected to thermal plume emission and support a perception that parts of the boundary layer can be turbulent, while others are not. The transition to the ultimate regime, in which the boundary layers are considered to be fully turbulent, can therefore be understood as a gradual increases in fraction of the plume-emitting ('turbulent') regions of the boundary layer.
△ Less
Submitted 6 October, 2015;
originally announced October 2015.
-
A multiple--resolution strategy for Direct Numerical Simulation of scalar turbulence
Authors:
Rodolfo Ostilla-Mónico,
Yantao Yang,
Erwin P. van der Poel,
Detlef Lohse,
Roberto Verzicco
Abstract:
In this paper a numerical procedure to simulate low diffusivity scalar turbulence is presented. The method consists of using a grid for the advected scalar with a higher spatial resolutions than that of the momentum. The latter usually requires a less refined mesh and integrating both fields on a single grid tailored to the most demanding variable, produces an unnecessary computational overhead. A…
▽ More
In this paper a numerical procedure to simulate low diffusivity scalar turbulence is presented. The method consists of using a grid for the advected scalar with a higher spatial resolutions than that of the momentum. The latter usually requires a less refined mesh and integrating both fields on a single grid tailored to the most demanding variable, produces an unnecessary computational overhead. A multiple resolution approach is used also in the time integration in order to maintain the stability of the scalars on the finer grid. The method is the more advantageous the less diffusive the scalar is with respect to momentum, therefore it is particularly well suited for large Prandtl or Schmidt number flows. However, even in the case of equal diffusivities the present procedure gives CPU time and memory occupation savings. The reason is that the absence of the pressure term in the scalar equation leads to much steeper gradients in the scalar field as compared to the velocity field.
△ Less
Submitted 6 February, 2015;
originally announced February 2015.
-
The effect of velocity boundary conditions on the heat transfer and flow topology in two-dimensional Rayleigh-Bénard convection
Authors:
Erwin P. van der Poel,
Rodolfo Ostilla Mónico,
Roberto Verzicco,
Detlef Lohse
Abstract:
The effect of various velocity boundary condition is studied in two-dimensional Rayleigh-Bénard convection. Combinations of no-slip, stress-free and periodic boundary conditions are used on both the sidewalls and the horizontal plates. For the studied Rayleigh numbers Ra between $10^8$ and $10^{11}$ the heat transport is lower for $Γ= 0.33$ than for $Γ= 1$ in case of no-slip sidewalls. This is sur…
▽ More
The effect of various velocity boundary condition is studied in two-dimensional Rayleigh-Bénard convection. Combinations of no-slip, stress-free and periodic boundary conditions are used on both the sidewalls and the horizontal plates. For the studied Rayleigh numbers Ra between $10^8$ and $10^{11}$ the heat transport is lower for $Γ= 0.33$ than for $Γ= 1$ in case of no-slip sidewalls. This is surprisingly opposite for stress-free sidewalls, where the heat transport increases for lower aspect-ratio. In wider cells the aspect-ratio dependence is observed to disappear for $\text{Ra} \ge 10^{10}$. Two distinct flow types with very different dynamics can be seen, mostly dependent on the plate velocity boundary condition, namely roll-like flow and horizontal zonal flow, which have a substantial effect on the dynamics and heat transport in the system. The predominantly horizontal zonal flow suppresses heat flux and is observed for stress-free and asymmetric plates. Low aspect-ratio periodic sidewall simulations with a no-slip boundary condition on the plates also exhibit zonal flow. In all the other cases, the flow is roll-like. In two-dimensional Rayleigh-Bénard convection, the velocity boundary conditions thus have large implications on both roll-like and zonal flow that have to be taken into consideration before the boundary conditions are imposed.
△ Less
Submitted 8 January, 2015;
originally announced January 2015.
-
Comparison between two and three dimensional Rayleigh-Bénard convection
Authors:
Erwin P. van der Poel,
Richard J. A. M. Stevens,
Detlef Lohse
Abstract:
Two dimensional (2D) and three dimensional (3D) Rayleigh-Bénard convection is compared using results from direct numerical simulations and prior experiments. The explored phase diagrams for both cases are reviewed. The differences and similarities between 2D and 3D are studied using Nu(Ra) for Pr = 4.38 and Pr = 0.7 and Nu(Pr) for Ra up to $10^8$. In the Nu(Ra) scaling at higher Pr, 2D and 3D are…
▽ More
Two dimensional (2D) and three dimensional (3D) Rayleigh-Bénard convection is compared using results from direct numerical simulations and prior experiments. The explored phase diagrams for both cases are reviewed. The differences and similarities between 2D and 3D are studied using Nu(Ra) for Pr = 4.38 and Pr = 0.7 and Nu(Pr) for Ra up to $10^8$. In the Nu(Ra) scaling at higher Pr, 2D and 3D are very similar; differing only by a constant factor up to $\text{Ra} = 10^{10}$. In contrast, the difference is large at lower Pr, due to the strong roll state dependence of Nu in 2D. The behaviour of Nu(Pr) is similar in 2D and 3D at large Pr. However, it differs significantly around Pr = 1. The Reynolds number values are consistently higher in 2D and additionally converge at large Pr. Finally, the thermal boundary layer profiles are compared in 2D and 3D.
△ Less
Submitted 8 January, 2015;
originally announced January 2015.
-
A pencil distributed finite difference code for strongly turbulent wall-bounded flows
Authors:
Erwin P. van der Poel,
Rodolfo Ostilla Mónico,
John Donners,
Roberto Verzicco
Abstract:
We present a numerical scheme geared for high performance computation of wall-bounded turbulent flows. The number of all-to-all communications is decreased to only six instances by using a two-dimensional (pencil) domain decomposition and utilizing the favourable scaling of the CFL time-step constraint as compared to the diffusive time-step constraint. As the CFL condition is more restrictive at h…
▽ More
We present a numerical scheme geared for high performance computation of wall-bounded turbulent flows. The number of all-to-all communications is decreased to only six instances by using a two-dimensional (pencil) domain decomposition and utilizing the favourable scaling of the CFL time-step constraint as compared to the diffusive time-step constraint. As the CFL condition is more restrictive at high driving, implicit time integration of the viscous terms in the wall-parallel directions is no longer required. This avoids the communication of non-local information to a process for the computation of implicit derivatives in these directions. We explain in detail the numerical scheme used for the integration of the equations, and the underlying parallelization. The code is shown to have very good strong and weak scaling to at least 64K cores.
△ Less
Submitted 6 January, 2015;
originally announced January 2015.
-
Geostrophic convective turbulence: The effect of boundary layers
Authors:
Rudie P. J. Kunnen,
Rodolfo Ostilla-Mónico,
Erwin P. van der Poel,
Roberto Verzicco,
Detlef Lohse
Abstract:
Rayleigh--Bénard (RB) convection, the flow in a fluid layer heated from below and cooled from above, is used to analyze the transition to the geostrophic regime of thermal convection. In the geostrophic regime, which is of direct relevance to most geo- and astrophysical flows, the system is strongly rotated while maintaining a sufficiently large thermal driving to generate turbulence. We directly…
▽ More
Rayleigh--Bénard (RB) convection, the flow in a fluid layer heated from below and cooled from above, is used to analyze the transition to the geostrophic regime of thermal convection. In the geostrophic regime, which is of direct relevance to most geo- and astrophysical flows, the system is strongly rotated while maintaining a sufficiently large thermal driving to generate turbulence. We directly simulate the Navier--Stokes equations for two values of the thermal forcing, i.e. $Ra=10^{10}$ and $Ra=5\cdot10^{10}$, a constant Prandtl number~$Pr=1$, and vary the Ekman number in the range $Ek=1.3\cdot10^{-7}$ to $Ek=2\cdot10^{-6}$ which satisfies both requirements of super-criticality and strong rotation. We focus on the differences between the application of no-slip vs. stress-free boundary conditions on the horizontal plates. The transition is found at roughly the same parameter values for both boundary conditions, i.e. at~$Ek\approx 9\times 10^{-7}$ for~$Ra=1\times 10^{10}$ and at~$Ek\approx 3\times 10^{-7}$ for~$Ra=5\times 10^{10}$. However, the transition is gradual and it does not exactly coincide in~$Ek$ for different flow indicators. In particular, we report the characteristics of the transitions in the heat transfer scaling laws, the boundary-layer thicknesses, the bulk/boundary-layer distribution of dissipations and the mean temperature gradient in the bulk. The flow phenomenology in the geostrophic regime evolves differently for no-slip and stress-free plates. For stress-free conditions the formation of a large-scale barotropic vortex with associated inverse energy cascade is apparent. For no-slip plates, a turbulent state without large-scale coherent structures is found; the absence of large-scale structure formation is reflected in the energy transfer in the sense that the inverse cascade, present for stress-free boundary conditions, vanishes.
△ Less
Submitted 1 February, 2016; v1 submitted 23 September, 2014;
originally announced September 2014.
-
Exploring the phase diagram of fully turbulent Taylor-Couette flow
Authors:
Rodolfo Ostilla Mónico,
Erwin P. van der Poel,
Roberto Verzicco,
Siegfried Grossmann,
Detlef Lohse
Abstract:
Direct numerical simulations of Taylor-Couette flow (TC). Shear Reynolds numbers of up to $3\cdot10^5$, corresponding to Taylor numbers of $Ta=4.6\cdot10^{10}$, were reached. Effective scaling laws for the torque are presented. The transition to the ultimate regime, in which asymptotic scaling laws (with logarithmic corrections) for the torque are expected to hold up to arbitrarily high driving, i…
▽ More
Direct numerical simulations of Taylor-Couette flow (TC). Shear Reynolds numbers of up to $3\cdot10^5$, corresponding to Taylor numbers of $Ta=4.6\cdot10^{10}$, were reached. Effective scaling laws for the torque are presented. The transition to the ultimate regime, in which asymptotic scaling laws (with logarithmic corrections) for the torque are expected to hold up to arbitrarily high driving, is analysed for different radius ratios $η$, different aspect ratios $Γ$ and different rotation ratios $Ro$. It is shown that the transition is approximately independent of $Ro$ and $Γ$, but depends significantly on $η$. We furthermore calculate the local angular velocity profiles and visualize different flow regimes that depend both on the shearing of the flow, and the Coriolis force originating from the outer cylinder rotation. Two main regimes are distinguished, based on the magnitude of the Coriolis force, namely the co-rotating and weakly counter-rotating regime dominated by Rayleigh-unstable regions, and the strongly counter-rotating regime where a mixture of stable and unstable regions exist. Furthermore, an analogy between $η$ and outer-cylinder rotation is revealed, namely that smaller gaps behave like a wider gap with co-rotating cylinders, and that wider gaps behave like smaller gaps with weakly counter-rotating cylinders. Finally, the effect of $Γ$ on the effective torque versus $Ta$ scaling is analysed and it is shown that different branches of the torque-versus-$Ta$ relationships associated to different aspect ratios are found to cross within $15%$ of the $Re$ associated to the transition to the ultimate regime. The paper culminates in phase diagram in the inner vs outer $Re$ number parameter space and in the $Ta$ vs $Ro$ parameter space, which can be seen as the extension of the Andereck \emph{et al.} phase diagram towards the ultimate regime.
△ Less
Submitted 15 October, 2014; v1 submitted 1 May, 2014;
originally announced May 2014.
-
Boundary layer dynamics at the transition between the classical and the ultimate regime of Taylor-Couette flow
Authors:
Rodolfo Ostilla Monico,
Erwin P. van der Poel,
Roberto Verzicco,
Siegfried Grossmann,
Detlef Lohse
Abstract:
Direct numerical simulations of turbulent Taylor-Couette flow are performed up to inner cylinder Reynolds numbers of {Re_i=10^5} for a radius ratio of {η=r_i/r_o=0.714} between the inner and outer cylinder. With increasing {Re_i}, the flow undergoes transitions between three different regimes: (i) a flow dominated by large coherent structures, (ii) an intermediate transitional regime, and (iii) a…
▽ More
Direct numerical simulations of turbulent Taylor-Couette flow are performed up to inner cylinder Reynolds numbers of {Re_i=10^5} for a radius ratio of {η=r_i/r_o=0.714} between the inner and outer cylinder. With increasing {Re_i}, the flow undergoes transitions between three different regimes: (i) a flow dominated by large coherent structures, (ii) an intermediate transitional regime, and (iii) a flow with developed turbulence. In the first regime the large--scale rolls completely drive the meridional flow while in the second one the coherent structures recover only on average. The presence of a mean flow allows for the coexistence of laminar and turbulent boundary layer dynamics. In the third regime the mean flow effects fade away and the flow becomes dominated by plumes. The effect of the local driving on the azimuthal and angular velocity profiles is quantified, in particular we show when and where those profiles develop.
△ Less
Submitted 29 October, 2013; v1 submitted 12 June, 2013;
originally announced June 2013.
-
The unifying theory of scaling in thermal convection: The updated prefactors
Authors:
Richard J. A. M. Stevens,
Erwin P. van der Poel,
Siegfried Grossmann,
Detlef Lohse
Abstract:
The unifying theory of scaling in thermal convection (Grossmann & Lohse (2000)) (henceforth the GL theory) suggests that there are no pure power laws for the Nusselt and Reynolds numbers as function of the Rayleigh and Prandtl numbers in the experimentally accessible parameter regime. In Grossmann & Lohse (2001) the dimensionless parameters of the theory were fitted to 155 experimental data points…
▽ More
The unifying theory of scaling in thermal convection (Grossmann & Lohse (2000)) (henceforth the GL theory) suggests that there are no pure power laws for the Nusselt and Reynolds numbers as function of the Rayleigh and Prandtl numbers in the experimentally accessible parameter regime. In Grossmann & Lohse (2001) the dimensionless parameters of the theory were fitted to 155 experimental data points by Ahlers & Xu (2001) in the regime $3\times 10^7 \le Ra \le 3 \times 10^{9}$ and $4\le Pr \le 34$ and Grossmann & Lohse (2002) used the experimental data point from Qiu & Tong (2001) and the fact that Nu(Ra,Pr) is independent of the parameter a, which relates the dimensionless kinetic boundary thickness with the square root of the wind Reynolds number, to fix the Reynolds number dependence. Meanwhile the theory is on one hand well confirmed through various new experiments and numerical simulations. On the other hand these new data points provide the basis for an updated fit in a much larger parameter space. Here we pick four well established (and sufficiently distant) Nu(Ra,Pr) data points and show that the resulting Nu(Ra,Pr) function is in agreement with almost all established experimental and numerical data up to the ultimate regime of thermal convection, whose onset also follows from the theory. One extra Re(Ra,Pr) data point is used to fix Re(Ra,Pr). As Re can depend on the definition and the aspect ratio the transformation properties of the GL equations are discussed in order to show how the GL coefficients can easily be adapted to new Reynolds number data while keeping Nu(Ra,Pr) unchanged.
△ Less
Submitted 20 June, 2013; v1 submitted 29 January, 2013;
originally announced January 2013.
-
Flow states in two-dimensional Rayleigh-Bénard convection as a function of aspect-ratio and Rayleigh number
Authors:
Erwin P. van der Poel,
Richard J. A. M. Stevens,
Kazuyasu Sugiyama,
Detlef Lohse
Abstract:
In this numerical study on two-dimensional Rayleigh-Bénard convection we consider $10^7 \leq Ra \leq 10^{12}$ in aspect ratio $0.23 \leq Γ\leq 13$ samples. We focus on several cases. First we consider small aspect ratio cells, where at high Ra number we find a sharp transition from a low Ra number branch towards a high Ra number branch, due to changes in the flow structure. Subsequently, we show t…
▽ More
In this numerical study on two-dimensional Rayleigh-Bénard convection we consider $10^7 \leq Ra \leq 10^{12}$ in aspect ratio $0.23 \leq Γ\leq 13$ samples. We focus on several cases. First we consider small aspect ratio cells, where at high Ra number we find a sharp transition from a low Ra number branch towards a high Ra number branch, due to changes in the flow structure. Subsequently, we show that the influence of the aspect ratio on the heat transport decreases with increasing aspect ratio, although even at very large aspect ratio of $Γ\approx10$ variations up to 2.5% in the heat transport as a function of Γare observed. Finally, we observe long-lived transients up to at least $Ra=10^9$, as in certain aspect ratio cells we observe different flow states that are stable for thousands of turnover times.
△ Less
Submitted 3 July, 2012; v1 submitted 18 June, 2012;
originally announced June 2012.
-
Connecting flow structures and heat flux in turbulent Rayleigh-Bénard convection
Authors:
Erwin P. van der Poel,
Richard J. A. M. Stevens,
Detlef Lohse
Abstract:
The aspect ratio (Γ) dependence of the heat transfer (Nusselt number Nu in dimensionless form) in turbulent (two-dimensional) Rayleigh-Bénard convection is numerically studied in the regime $0.4 \le Γ\le 1.25$ for Rayleigh numbers $10^7 \le Ra \le Ra^{9}$ and Prandtl numbers Pr =0.7 (gas) and 4.3 (water). Nu (Γ) shows a very rich structure with sudden jumps and sharp transitions. We connect these…
▽ More
The aspect ratio (Γ) dependence of the heat transfer (Nusselt number Nu in dimensionless form) in turbulent (two-dimensional) Rayleigh-Bénard convection is numerically studied in the regime $0.4 \le Γ\le 1.25$ for Rayleigh numbers $10^7 \le Ra \le Ra^{9}$ and Prandtl numbers Pr =0.7 (gas) and 4.3 (water). Nu (Γ) shows a very rich structure with sudden jumps and sharp transitions. We connect these structures to the way the flow organizes itself in the sample and explain why the aspect ratio dependence of Nu is more pronounced for small Pr. Even for fixed Γdifferent turbulent states (with different resulting Nu) can exist, between which the flow can or cannot switch. In the latter case the heat transfer thus depends on the initial conditions.
△ Less
Submitted 30 September, 2011;
originally announced September 2011.
-
Optical characterization and selective addressing of the resonant modes of a micropillar cavity with a white light beam
Authors:
Georgios Ctistis,
Alex Hartsuiker,
Edwin van der Pol,
Julien Claudon,
Willem L. Vos,
Jean-Michel Gérard
Abstract:
We have performed white-light reflectivity measurements on GaAs/AlAs micropillar cavities with diameters ranging from 1 μm up to 20 μm. We are able to resolve the spatial field distribution of each cavity mode in real space by scanning a small-sized beam across the top facet of each micropillar. We spectrally resolve distinct transverse optical cavity modes in reflectivity. Using this procedure we…
▽ More
We have performed white-light reflectivity measurements on GaAs/AlAs micropillar cavities with diameters ranging from 1 μm up to 20 μm. We are able to resolve the spatial field distribution of each cavity mode in real space by scanning a small-sized beam across the top facet of each micropillar. We spectrally resolve distinct transverse optical cavity modes in reflectivity. Using this procedure we can selectively address a single mode in the multimode micropillar cavity. Calculations for the coupling efficiency of a small-diameter beam to each mode are in very good agreement with our reflectivity measurements.
△ Less
Submitted 10 November, 2010; v1 submitted 2 July, 2010;
originally announced July 2010.
