-
Compressible N-phase fluid mixture models
Authors:
M. F. P. ten Eikelder,
E. H. van Brummelen,
D. Schillinger
Abstract:
Fluid mixture models are essential for describing a wide range of physical phenomena, including wave dynamics and spinodal decomposition. However, there is a lack of consensus in the modeling of compressible mixtures, with limited connections between different classes of models. On the one hand, existing compressible two-phase flow models accurately describe wave dynamics, but do not incorporate p…
▽ More
Fluid mixture models are essential for describing a wide range of physical phenomena, including wave dynamics and spinodal decomposition. However, there is a lack of consensus in the modeling of compressible mixtures, with limited connections between different classes of models. On the one hand, existing compressible two-phase flow models accurately describe wave dynamics, but do not incorporate phase separation mechanisms. On the other hand, phase-field technology in fluid dynamics consists of models incorporating spinodal decomposition, however, a general phase-field theory for compressible mixtures remains largely undeveloped.
In this paper, we take an initial step toward bridging the gap between compressible two-phase flow models and phase-field models by developing a theory for compressible, isothermal N-phase mixtures. Our theory establishes a system of reduced complexity by formulating N mass balance laws alongside a single momentum balance law, thereby naturally extending the Navier-Stokes Korteweg model to N-phases and providing the Navier-Stokes Cahn-Hilliard/Allen-Cahn model for compressible mixtures. Key aspects of the framework include its grounding in continuum mixture theory and its preservation of thermodynamic consistency despite its reduced complexity.
△ Less
Submitted 31 March, 2025;
originally announced March 2025.
-
On the Consistency of Dynamic Wetting Boundary Conditions for the Navier-Stokes-Cahn-Hilliard Equations
Authors:
T. H. B. Demont,
S. K. F. Stoter,
C. Diddens,
E. H. van Brummelen
Abstract:
We investigate the limiting behavior of the Navier-Stokes-Cahn-Hilliard model for binary-fluid flows as the diffuse-interface thickness passes to zero, in the presence of fluid-fluid-solid contact lines. Allowing for motion of such contact lines relative to the solid substrate is required to adequately model multi-phase and multi-species fluid transport past and through solid media. Even though di…
▽ More
We investigate the limiting behavior of the Navier-Stokes-Cahn-Hilliard model for binary-fluid flows as the diffuse-interface thickness passes to zero, in the presence of fluid-fluid-solid contact lines. Allowing for motion of such contact lines relative to the solid substrate is required to adequately model multi-phase and multi-species fluid transport past and through solid media. Even though diffuse-interface models provide an inherent slip mechanism through the mobility-induced diffusion, this slip vanishes as the interface thickness and mobility parameter tend to zero in the so-called sharp-interface limit. The objective of this work is to present dynamic wetting and generalized Navier boundary conditions for diffuse-interface models that are consistent in the sharp-interface limit. We concentrate our analysis on the prototypical binary-fluid Couette-flow problems. To verify the consistency of the diffuse-interface model in the limit of vanishing interface thickness, we provide reference limit solutions of a corresponding sharp-interface model. For parameter values both at and away from the critical viscosity ratio, we present and compare the results of both the diffuse- and sharp-interface models. The close match between both model results indicates that the considered test case lends itself well as a benchmark for further research.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Thermodynamics of surfactant-enriched binary-fluid systems
Authors:
T. B. van Sluijs,
S. K. F. Stoter,
E. H. van Brummelen
Abstract:
Surface-active agents (surfactants) release potential energy as they migrate from one of two adjacent fluids onto their fluid-fluid interface, a process that profoundly impacts the system's energy and entropy householding. The continuum thermodynamics underlying such a surfactant-enriched binary-fluid system has not yet been explored comprehensively. In this article, we present a mathematical desc…
▽ More
Surface-active agents (surfactants) release potential energy as they migrate from one of two adjacent fluids onto their fluid-fluid interface, a process that profoundly impacts the system's energy and entropy householding. The continuum thermodynamics underlying such a surfactant-enriched binary-fluid system has not yet been explored comprehensively. In this article, we present a mathematical description of such a system, in terms of balance laws, equations of state, and permissible constitutive relations and interface conditions, that satisfies the first and second law of thermodynamics. The interface conditions and permissible constitutive relations are revealed through a Coleman-Noll analysis. We characterize the system's equilibrium by defining equilibrium equivalences and study an example system. With our work, we aim to provide a systematically derived framework that combines and links various elements of existing literature, and that can serve as a thermodynamically consistent foundation for the (numerical) modeling of full surfactant-enriched binary-fluid systems.
△ Less
Submitted 24 May, 2024;
originally announced May 2024.
-
Numerical investigation of fluid-structure interaction in a pilot-operated microfluidic valve
Authors:
Ahmed Aissa Berraies,
E. Harald van Brummelen,
Ferdinando Auricchio
Abstract:
The present paper is concerned with numerical investigation of the performance of a pilot-operated control valve based on shape memory alloy actuation control. The valve under investigation can be integrated into miniaturized hydraulic systems and is developed to perform precise dispensing, mixing, or dosing tasks while being able to withstand relatively high pressure differences. The study evalua…
▽ More
The present paper is concerned with numerical investigation of the performance of a pilot-operated control valve based on shape memory alloy actuation control. The valve under investigation can be integrated into miniaturized hydraulic systems and is developed to perform precise dispensing, mixing, or dosing tasks while being able to withstand relatively high pressure differences. The study evaluates the valve's response under the current ON/OFF and the desired proportional control regimes using numerical methods for fluid-structure interaction. The computational model replicates the operation of the valve, which requires an understanding of the complex interactions between the fluid flow with the pressurized valve and the contact with the valve seat during the opening and closing processes. In addition, the model leverages advanced numerical techniques to overcome several complexities arising mainly from the geometrical, material, and contact nonlinearities, and to mitigate the shortcomings of the partitioned fluid-structure interaction approach. Several simulations are conducted to examine the valve's structural and flow behavior under varying pressure conditions. Results indicate that the valve is adequate for ON/OFF actuation control but is susceptible to flow-induced vibrations during the proportional control regime that occurs due to the sharp pressure drop in the valve-seat gap and the ensuing Venturi effect, which counteract the opening of the main valve. The fluid-structure-interaction simulations provide insight into the mechanism underlying the flow-induced vibrations, which can serve to improve the design and enhance the performance of the valve in microfluidic applications.
△ Less
Submitted 28 April, 2024;
originally announced April 2024.
-
Soft wetting with (a)symmetric Shuttleworth effect
Authors:
C. Henkel,
M. H. Essink,
Tuong Hoang,
G. J. van Zwieten,
E. H. van Brummelen,
U. Thiele,
J. H. Snoeijer
Abstract:
The wetting of soft polymer substrates brings in multiple complexities as compared to the wetting on rigid substrates. The contact angle of the liquid is no longer governed by Young's law, but is affected by the substrate's bulk and surface deformations. On top of that, elastic interfaces exhibit a surface energy that depends on how much they are stretched -- a feature known as the Shuttleworth ef…
▽ More
The wetting of soft polymer substrates brings in multiple complexities as compared to the wetting on rigid substrates. The contact angle of the liquid is no longer governed by Young's law, but is affected by the substrate's bulk and surface deformations. On top of that, elastic interfaces exhibit a surface energy that depends on how much they are stretched -- a feature known as the Shuttleworth effect (or as surface-elasticity). Here we present two models by which we explore the wetting of drops in the presence of a strong Shuttleworth effect. The first model is macroscopic in character and consistently accounts for large deformations via a neo-Hookean elasticity. The second model is based on a mesoscopic description of wetting, using a reduced description of the substrate's elasticity. While the second model is more empirical in terms of the elasticity, it enables a gradient dynamics formulation for soft wetting dynamics. We provide a detailed comparison between the equilibrium states predicted by the two models, from which we deduce robust features of soft wetting in the presence of a strong Shuttleworth effect. Specifically, we show that the (a)symmetry of the Shuttleworth effect between the "dry" and "wet" states governs horizontal deformations in the substrate. Our results are discussed in the light of recent experiments on the wettability of stretched substrates.
△ Less
Submitted 11 January, 2022;
originally announced January 2022.
-
Inverting elastic dislocations using the Weakly-enforced Slip Method
Authors:
G. J. van Zwieten,
E. H. van Brummelen,
R. F. Hanssen
Abstract:
Earthquakes cause lasting changes in static equilibrium, resulting in global deformation fields that can be observed. Consequently, deformation measurements such as those provided by satellite based InSAR monitoring can be used to infer an earthquake's faulting mechanism. This inverse problem requires a numerical forward model that is both accurate and fast, as typical inverse procedures require m…
▽ More
Earthquakes cause lasting changes in static equilibrium, resulting in global deformation fields that can be observed. Consequently, deformation measurements such as those provided by satellite based InSAR monitoring can be used to infer an earthquake's faulting mechanism. This inverse problem requires a numerical forward model that is both accurate and fast, as typical inverse procedures require many evaluations. The Weakly-enforced Slip Method (WSM) was developed to meet these needs, but it was not before applied in an inverse problem setting. Consequently, it was unknown what effect particular properties of the WSM, notably its inherent continuity, have on the inversion process. Here we show that the WSM is able to accurately recover slip distributions in a Bayesian-inference setting, provided that data points in the vicinity of the fault are removed. In a representative scenario, an element size of 2 km was found to be sufficiently fine to generate a posterior probability distribution that is close to the theoretical optimum. For rupturing faults a masking zone of 20 km sufficed to avoid numerical disturbances that would otherwise be induced by the discretization error. These results demonstrate that the WSM is a viable forward method for earthquake inversion problems. While our synthesized scenario is basic for reasons of validation, our results are expected to generalize to the wider gamut of scenarios that finite element methods are able to capture. This has the potential to bring modeling flexibility to a field that if often forced to impose model restrictions in a concession to computability.
△ Less
Submitted 6 July, 2021;
originally announced July 2021.
-
Error estimation and adaptive moment hierarchies for goal-oriented approximations of the Boltzmann equation
Authors:
M. R. A. Abdelmalik,
E. H. van Brummelen
Abstract:
This paper presents an a-posteriori goal-oriented error analysis for a numerical approximation of the steady Boltzmann equation based on a moment-system approximation in velocity dependence and a discontinuous Galerkin finite-element (DGFE) approximation in position dependence. We derive computable error estimates and bounds for general target functionals of solutions of the steady Boltzmann equat…
▽ More
This paper presents an a-posteriori goal-oriented error analysis for a numerical approximation of the steady Boltzmann equation based on a moment-system approximation in velocity dependence and a discontinuous Galerkin finite-element (DGFE) approximation in position dependence. We derive computable error estimates and bounds for general target functionals of solutions of the steady Boltzmann equation based on the DGFE moment approximation. The a-posteriori error estimates and bounds are used to guide a model adaptive algorithm for optimal approximations of the goal functional in question. We present results for one-dimensional heat transfer and shock structure problems where the moment model order is refined locally in space for optimal approximation of the heat flux.
△ Less
Submitted 11 August, 2017;
originally announced August 2017.
-
Diffuse-Interface Two-Phase Flow Models with Different Densities: A New Quasi-Incompressible Form and a Linear Energy-Stable Method
Authors:
Mahnaz Shokrpour Roudbari,
Gorkem Simsek,
E. Harald van Brummelen,
Kristoffer G. van der Zee
Abstract:
While various phase-field models have recently appeared for two-phase fluids with different densities, only some are known to be thermodynamically consistent, and practical stable schemes for their numerical simulation are lacking. In this paper, we derive a new form of thermodynamically-consistent quasi-incompressible diffuse-interface Navier-Stokes Cahn-Hilliard model for a two-phase flow of inc…
▽ More
While various phase-field models have recently appeared for two-phase fluids with different densities, only some are known to be thermodynamically consistent, and practical stable schemes for their numerical simulation are lacking. In this paper, we derive a new form of thermodynamically-consistent quasi-incompressible diffuse-interface Navier-Stokes Cahn-Hilliard model for a two-phase flow of incompressible fluids with different densities. The derivation is based on mixture theory by invoking the second law of thermodynamics and Coleman-Noll procedure. We also demonstrate that our model and some of the existing models are equivalent and we provide a unification between them. In addition, we develop a linear and energy-stable time-integration scheme for the derived model. Such a linearly-implicit scheme is nontrivial, because it has to suitably deal with all nonlinear terms, in particular those involving the density. Our proposed scheme is the first linear method for quasi-incompressible two-phase flows with nonsolenoidal velocity that satisfies discrete energy dissipation independent of the time-step size, provided that the mixture density remains positive. The scheme also preserves mass. Numerical experiments verify the suitability of the scheme for two-phase flow applications with high density ratios using large time steps by considering the coalescence and break-up dynamics of droplets including pinching due to gravity.
△ Less
Submitted 21 July, 2017; v1 submitted 21 March, 2016;
originally announced March 2016.
-
A Multiscale Diffuse-Interface Model for Two-Phase Flow in Porous Media
Authors:
Mahnaz Shokrpour Roudbari,
E. Harald van Brummelen,
Clemens V. Verhoosel
Abstract:
In this paper we consider a multiscale phase-field model for capillarity-driven flows in porous media. The presented model constitutes a reduction of the conventional Navier-Stokes-Cahn-Hilliard phase-field model, valid in situations where interest is restricted to dynamical and equilibrium behavior in an aggregated sense, rather than a precise description of microscale flow phenomena. The model i…
▽ More
In this paper we consider a multiscale phase-field model for capillarity-driven flows in porous media. The presented model constitutes a reduction of the conventional Navier-Stokes-Cahn-Hilliard phase-field model, valid in situations where interest is restricted to dynamical and equilibrium behavior in an aggregated sense, rather than a precise description of microscale flow phenomena. The model is based on averaging of the equation of motion, thereby yielding a significant reduction in the complexity of the underlying Navier-Stokes-Cahn-Hilliard equations, while retaining its macroscopic dynamical and equilibrium properties. Numerical results are presented for the representative 2-dimensional capillary-rise problem pertaining to two closely spaced vertical plates with both identical and disparate wetting properties. Comparison with analytical solutions for these test cases corroborates the accuracy of the presented multiscale model. In addition, we present results for a capillary-rise problem with a non-trivial geometry corresponding to a porous medium.
△ Less
Submitted 3 February, 2016;
originally announced February 2016.
-
An Entropy Stable Discontinuous Galerkin Finite-Element Moment Method for the Boltzmann Equation
Authors:
M. R. A. Abdelmalik,
E. H. van Brummelen
Abstract:
This paper presents a numerical approximation technique for the Boltzmann equation based on a moment system approximation in velocity dependence and a discontinuous Galerkin finite-element approximation in position dependence. The closure relation for the moment systems derives from minimization of a suitable φ-divergence. This divergence-based closure yields a hierarchy of tractable symmetric hyp…
▽ More
This paper presents a numerical approximation technique for the Boltzmann equation based on a moment system approximation in velocity dependence and a discontinuous Galerkin finite-element approximation in position dependence. The closure relation for the moment systems derives from minimization of a suitable φ-divergence. This divergence-based closure yields a hierarchy of tractable symmetric hyperbolic moment systems that retain the fundamental structural properties of the Boltzmann equation. The resulting combined discontinuous Galerkin moment method corresponds to a Galerkin approximation of the Boltzmann equation in renormalized form. We present a new class of numerical flux functions, based on the underlying renormalized Boltzmann equation, that ensure entropy dissipation of the approximation scheme. Numerical results are presented for a one-dimensional test case.
△ Less
Submitted 3 February, 2016;
originally announced February 2016.
-
Elasto-capillarity Simulations based on the Navier-Stokes-Cahn-Hilliard Equations
Authors:
E. H. van Brummelen,
M. Shokrpour-Roudbari,
G. J. van Zwieten
Abstract:
We consider a computational model for complex-fluid-solid interaction based on a diffuse-interface model for the complex fluid and a hyperelastic-material model for the solid. The diffuse-interface complex-fluid model is described by the incompressible Navier-Stokes-Cahn-Hilliard equations with preferential-wetting boundary conditions at the fluid-solid interface. The corresponding fluid traction…
▽ More
We consider a computational model for complex-fluid-solid interaction based on a diffuse-interface model for the complex fluid and a hyperelastic-material model for the solid. The diffuse-interface complex-fluid model is described by the incompressible Navier-Stokes-Cahn-Hilliard equations with preferential-wetting boundary conditions at the fluid-solid interface. The corresponding fluid traction on the interface includes a capillary-stress contribution, and the dynamic interface condition comprises the traction exerted by the non-uniform fluid-solid surface tension. We present a weak formulation of the aggregated complex-fluid-solid-interaction problem, based on an Arbitrary-Lagrangian-Eulerian formulation of the Navier-Stokes-Cahn-Hilliard equations and a proper reformulation of the complex-fluid traction and the fluid-solid surface tension. To validate the presented complex-fluid-solid-interaction model, we present numerical results and conduct a comparison to experimental data for a droplet on a soft substrate.
△ Less
Submitted 8 October, 2015;
originally announced October 2015.
-
Moment closure approximations of the Boltzmann Equation based on φ-divergences
Authors:
M. R. A. Abdel-Malik,
E. H. van Brummelen
Abstract:
This paper is concerned with approximations of the Boltzmann equation based on the method of moments. We propose a generalization of the setting of the moment-closure problem from relative entropy to φ-divergences and a corresponding closure procedure based on minimization of φ-divergences. The proposed description encapsulates as special cases Grad's classical closure based on expansion in Hermit…
▽ More
This paper is concerned with approximations of the Boltzmann equation based on the method of moments. We propose a generalization of the setting of the moment-closure problem from relative entropy to φ-divergences and a corresponding closure procedure based on minimization of φ-divergences. The proposed description encapsulates as special cases Grad's classical closure based on expansion in Hermite polynomials and Levermore's entropy-based closure. We establish that the generalization to divergence-based closures enables the construction of extended thermodynamic theories that avoid essential limitations of the standard moment-closure formulations such as inadmissibility of the approximate phase-space distribution, potential loss of hyperbolicity and singularity of flux functions at local equilibrium. The divergence-based closure leads to a hierarchy of tractable symmetric hyperbolic systems that retain the fundamental structural properties of the Boltzmann equation.
△ Less
Submitted 17 March, 2015;
originally announced March 2015.
