-
Speeds of sound for a biogas mixture $CH_{4}$ + $N_{2}$ + $CO_{2}$ + $CO$ from $p$ = (1-12) MPa at $T$ = (273, 300 and 325) K measured with a spherical resonator
Authors:
Daniel Lozano-Martín,
José J. Segovia,
M. Carmen Martín,
Teresa Fernández-Vicente,
D. del Campo
Abstract:
The present work aims to measure speeds of sound $c$ in a biogas mixture of $CH_{4}$ + $N_{2}$ + $CO_{2}$ + $CO$, at $p$ = (1-12) MPa and $T$ = (273, 300 and 325) K, using a spherical acoustical resonator. The results are fitted to the virial acoustic equation of state, and the virial acoustic coefficients are obtained, $β_{a}$ and $γ_{a}$ and extrapolated to zero pressure, determining the adiabat…
▽ More
The present work aims to measure speeds of sound $c$ in a biogas mixture of $CH_{4}$ + $N_{2}$ + $CO_{2}$ + $CO$, at $p$ = (1-12) MPa and $T$ = (273, 300 and 325) K, using a spherical acoustical resonator. The results are fitted to the virial acoustic equation of state, and the virial acoustic coefficients are obtained, $β_{a}$ and $γ_{a}$ and extrapolated to zero pressure, determining the adiabatic coefficient as perfect gas, $γ^{pg}$, and the isobaric and isochoric heat capacities as perfect gas, $C_{p}^{pg}$ and $C_{V}^{pg}$, respectively. The speeds of sound are acquired with a mean expanded relative uncertainty of 165 parts in $10^{6}$ ($k$ = 2) and are compared with the results predicted by the reference equation of state for this kind of mixture (natural gas-like mixtures), EoS GERG-2008. Relative deviations between experimental data and values estimated by this model were less than 700 parts in $10^{6}$ at $T$ = 325 K, and below 400 parts in $10^{6}$, and within measurement uncertainty of at $T$ = 300 K, although appreciably higher at isotherm $T$ = 273 K at the highest pressure data for this work, and even reaching values above 3 400 parts in $10^{6}$.
△ Less
Submitted 17 September, 2024;
originally announced September 2024.
-
Updated determination of the molar gas constant $R$ by acoustic measurements in argon at UVa-CEM
Authors:
J J Segovia,
D Lozano-Martín,
M C Martín,
C R Chamorro,
M A Villamañán,
E Pérez,
C García Izquierdo,
D del Campo
Abstract:
A new determination of the molar gas constant was performed from measurements of the speed of sound in argon at the triple point of water and extrapolation to zero pressure. A new resonant cavity was used. This is a triaxial ellipsoid whose walls are gold-coated steel and which is divided into two identical halves that are bolted and sealed with an O-ring. Microwave and electroacoustic traducers a…
▽ More
A new determination of the molar gas constant was performed from measurements of the speed of sound in argon at the triple point of water and extrapolation to zero pressure. A new resonant cavity was used. This is a triaxial ellipsoid whose walls are gold-coated steel and which is divided into two identical halves that are bolted and sealed with an O-ring. Microwave and electroacoustic traducers are located in the northern and southern parts of the cavity, respectively, so that measurements of microwave and acoustic frequencies are carried out in the same experiment. Measurements were taken at pressures from 600 kPa to 60 kPa and at 273.16 K. The internal equivalent radius of the cavity was accurately determined by microwave measurements and the first four radial symmetric acoustic modes were simultaneously measured and used to calculate the speed of sound. The improvements made using the new cavity have reduced by half the main contributions to the uncertainty due to the radius determination using microwave measurements which amounts to 4.7 parts in $10^{6}$ and the acoustic measurements, 4.4 parts in $10^{6}$, where the main contribution (3.7 parts in $10^{6}$) is the relative excess half-widths associated with the limit of our acoustic model, compared with our previous measurements. As a result of all the improvements with the new cavity and the measurements performed, we determined the molar gas constant $R$ = (8.314 449 $\pm$ 0.000 056) J/(K mol) which corresponds to a relative standard uncertainty of 6.7 parts in $10^{6}$. The value reported in this paper lies -1.3 parts in $10^{6}$ below the recommended value of CODATA 2014, although still within the range consistent with it.
△ Less
Submitted 16 September, 2024;
originally announced September 2024.
-
A novel technique based on a cylindrical microwave resonator for high pressure phase equilibrium determination
Authors:
Rodrigo Susial,
Ángel Gómez-Hernández,
Daniel Lozano-Martín,
Dolores del Campo,
M. Carmen Martín,
José J. Segovia
Abstract:
The development of a novel technique based on a cylindrical microwave resonator for high pressure phase equilibrium determination is described. Electric permittivity or dielectric constant is a physical property that depends on temperature and pressure $ε$($p$,$T$). Based on this property, a measuring technique consisting of a cylindrical resonant cavity that works in the microwave spectrum has be…
▽ More
The development of a novel technique based on a cylindrical microwave resonator for high pressure phase equilibrium determination is described. Electric permittivity or dielectric constant is a physical property that depends on temperature and pressure $ε$($p$,$T$). Based on this property, a measuring technique consisting of a cylindrical resonant cavity that works in the microwave spectrum has been developed. Equilibrium data of fluid mixtures are measured at high pressure using a synthetic method, where phase transition is determined under isothermal conditions due to the change of the dielectric constant. This technique may be a more accurate alternative to conventional visual synthetic methods. The technique was validated measuring pure $CO_{2}$, and phase behaviour was then determined for two binary mixtures [$CO_{2}$ (0.6) + $CH_{4}$ (0.4)] and [$CO_{2}$ (0.4) + $CH_{4}$ (0.6)], results for which are presented. These systems are interesting for the study of biogas-like mixtures. In addition, data were compared with the equation of state used for natural gas GERG-2008, and also, they were modelled using Peng-Robinson equation of state and Wong-Sandler mixing rules, which are widely employed in chemical industries and which give good results.
△ Less
Submitted 12 September, 2024;
originally announced September 2024.
