-
Design Of The LBNF Beamline
Authors:
V. Papadimitriou,
K. Ammigan,
J. Anderson Jr.,
K. E. Anderson,
R. Andrews,
V. Bocean,
C. F. Crowley,
N. Eddy,
B. D. Hartsell,
S. Hays,
P. Hurh,
J. Hylen,
J. A. Johnstone,
P. Kasper,
T. Kobilarcik,
G. E. Krafczyk,
B. Lundberg,
A. Marchionni,
N. V. Mokhov,
C. D. Moore,
D. Pushka,
I. Rakhno,
S. D. Reitzner,
P. Schlabach,
V. Sidorov
, et al. (9 additional authors not shown)
Abstract:
The Long Baseline Neutrino Facility (LBNF) will utilize a beamline located at Fermilab to provide and aim a neutrino beam of sufficient intensity and appropriate energy range toward the Deep Underground Neutrino Experiment (DUNE) detectors, placed deep underground at the SURF Facility in Lead, South Dakota. The primary proton beam (60-120 GeV) will be extracted from the MI-10 section of Fermilab's…
▽ More
The Long Baseline Neutrino Facility (LBNF) will utilize a beamline located at Fermilab to provide and aim a neutrino beam of sufficient intensity and appropriate energy range toward the Deep Underground Neutrino Experiment (DUNE) detectors, placed deep underground at the SURF Facility in Lead, South Dakota. The primary proton beam (60-120 GeV) will be extracted from the MI-10 section of Fermilab's Main Injector. Neutrinos will be produced when the protons interact with a solid target to produce mesons which will be subsequently focused by magnetic horns into a 194m long decay pipe where they decay into muons and neutrinos. The parameters of the facility were determined taking into account the physics goals, spatial and radiological constraints, and the experience gained by operating the NuMI facility at Fermilab. The Beamline facility is designed for initial operation at a proton-beam power of 1.2 MW, with the capability to support an upgrade to 2.4 MW. LBNF/DUNE obtained CD-1 approval in November 2015. We discuss here the design status and the associated challenges as well as the R&D and plans for improvements before baselining the facility.
△ Less
Submitted 14 April, 2017;
originally announced April 2017.
-
Design of the LBNF Beamline Target Station
Authors:
S. Tariq,
K. Ammigan,
K. Anderson,
S. A. Buccellato,
C. F. Crowley,
B. D. Hartsell,
P. Hurh,
J. Hylen,
P. Kasper,
G. E. Krafczyk,
A. Lee,
B. Lundberg,
A. Marchionni,
N. V. Mokhov,
C. D. Moore,
V. Papadimitriou,
D. Pushka,
I. Rakhno,
S. D. Reitzner,
V. Sidorov,
A. M. Stefanik,
I. S . Tropin,
K. Vaziri,
K. Williams,
R. M. Zwaska
, et al. (1 additional authors not shown)
Abstract:
The Long Baseline Neutrino Facility (LBNF) project will build a beamline located at Fermilab to create and aim an intense neutrino beam of appropriate energy range toward the DUNE detectors at the SURF facility in Lead, South Dakota. Neutrino production starts in the Target Station, which consists of a solid target, magnetic focusing horns, and the associated sub-systems and shielding infrastructu…
▽ More
The Long Baseline Neutrino Facility (LBNF) project will build a beamline located at Fermilab to create and aim an intense neutrino beam of appropriate energy range toward the DUNE detectors at the SURF facility in Lead, South Dakota. Neutrino production starts in the Target Station, which consists of a solid target, magnetic focusing horns, and the associated sub-systems and shielding infrastructure. Protons hit the target producing mesons which are then focused by the horns into a helium-filled decay pipe where they decay into muons and neutrinos. The target and horns are encased in actively cooled steel and concrete shielding in a chamber called the target chase. The reference design chase is filled with air, but nitrogen and helium are being evaluated as alternatives. A replaceable beam window separates the decay pipe from the target chase. The facility is designed for initial operation at 1.2 MW, with the ability to upgrade to 2.4 MW, and is taking advantage of the experience gained by operating Fermilab's NuMI facility. We discuss here the design status, associated challenges, and ongoing R&D and physics-driven component optimization of the Target Station.
△ Less
Submitted 21 December, 2016;
originally announced December 2016.
-
Current status of the LBNE neutrino beam
Authors:
Craig Damon Moore,
Ken Bourkland,
Cory Francis Crowley,
Patrick Hurh,
James Hylen,
Byron Lundberg,
Alberto Marchionni,
Mike McGee,
Nikolai V. Mokhov,
Vaia Papadimitriou,
Rob Plunkett,
Sarah Diane Reitzner,
Andrew M Stefanik,
Gueorgui Velev,
Karlton Williams,
Robert Miles Zwaska
Abstract:
The Long Baseline Neutrino Experiment (LBNE) will utilize a neutrino beamline facility located at Fermilab. The facility is designed to aim a beam of neutrinos toward a detector placed in South Dakota. The neutrinos are produced in a three-step process. First, protons from the Main Injector hit a solid target and produce mesons. Then, the charged mesons are focused by a set of focusing horns into…
▽ More
The Long Baseline Neutrino Experiment (LBNE) will utilize a neutrino beamline facility located at Fermilab. The facility is designed to aim a beam of neutrinos toward a detector placed in South Dakota. The neutrinos are produced in a three-step process. First, protons from the Main Injector hit a solid target and produce mesons. Then, the charged mesons are focused by a set of focusing horns into the decay pipe, towards the far detector. Finally, the mesons that enter the decay pipe decay into neutrinos. The parameters of the facility were determined by an amalgam of the physics goals, the Monte Carlo modeling of the facility, and the experience gained by operating the NuMI facility at Fermilab. The initial beam power is expected to be ~700 kW, however some of the parameters were chosen to be able to deal with a beam power of 2.3 MW. The LBNE Neutrino Beam has made significant changes to the initial design through consideration of numerous Value Engineering proposals and the current design is described.
△ Less
Submitted 6 February, 2015;
originally announced February 2015.
-
Secondary Electron Yield Measurements of Fermilab's Main Injector Vacuum Vessel
Authors:
D. J. Scott,
D. Capista,
K. L. Duel,
R. M. Zwaska,
S. Greenwald,
W. Hartung,
Y. Li,
T. P. Moore,
M. A. Palmer,
R. Kirby,
M. Pivi,
L. Wang
Abstract:
We discuss the progress made on a new installation in Fermilab's Main Injector that will help investigate the electron cloud phenomenon by making direct measurements of the secondary electron yield (SEY) of samples irradiated in the accelerator. In the Project X upgrade the Main Injector will have its beam intensity increased by a factor of three compared to current operations. This may result in…
▽ More
We discuss the progress made on a new installation in Fermilab's Main Injector that will help investigate the electron cloud phenomenon by making direct measurements of the secondary electron yield (SEY) of samples irradiated in the accelerator. In the Project X upgrade the Main Injector will have its beam intensity increased by a factor of three compared to current operations. This may result in the beam being subject to instabilities from the electron cloud. Measured SEY values can be used to further constrain simulations and aid our extrapolation to Project X intensities. The SEY test-stand, developed in conjunction with Cornell and SLAC, is capable of measuring the SEY from samples using an incident electron beam when the samples are biased at different voltages. We present the design and manufacture of the test-stand and the results of initial laboratory tests on samples prior to installation.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.
-
Overview of the LBNE Neutrino Beam
Authors:
C. D. Moore,
Yun He,
Patrick Hurh,
James Hylen,
Byron Lundberg,
Mike McGee,
Joel Misek,
Nikolai V. Mokhov,
Vaia Papadimitriou,
Rob Plunkett,
Ryan Schultz,
Gueorgui Velev,
Karlton Williams,
Robert Miles Zwaska
Abstract:
The Long Baseline Neutrino Experiment (LBNE) will utilize a neutrino beamline facility located at Fermilab. The facility is designed to aim a beam of neutrinos toward a detector placed at the Deep Underground Science and Engineering Laboratory (DUSEL) in South Dakota. The neutrinos are produced in a three-step process. First, protons from the Main Injector hit a solid target and produce mesons. Th…
▽ More
The Long Baseline Neutrino Experiment (LBNE) will utilize a neutrino beamline facility located at Fermilab. The facility is designed to aim a beam of neutrinos toward a detector placed at the Deep Underground Science and Engineering Laboratory (DUSEL) in South Dakota. The neutrinos are produced in a three-step process. First, protons from the Main Injector hit a solid target and produce mesons. Then, the charged mesons are focused by a set of focusing horns into the decay pipe, towards the far detector. Finally, the mesons that enter the decay pipe decay into neutrinos. The parameters of the facility were determined by an amalgam of the physics goals, the Monte Carlo modeling of the facility, and the experience gained by operating the NuMI facility at Fermilab. The initial beam power is expected to be ~700 kW, however some of the parameters were chosen to be able to deal with a beam power of 2.3 MW.
△ Less
Submitted 11 September, 2012;
originally announced September 2012.
-
Study of Neutron-Induced Ionization in Helium and Argon Chamber Gases
Authors:
D. Indurthy,
A. R. Erwin,
D. Harris,
S. Kopp,
M. Proga,
R. M. Zwaska
Abstract:
Ion chambers used to monitor the secondary hadron and tertiary muon beam in the NuMI neutrino beamline will be exposed to background particles, including low energy neutrons produced in the beam dump. To understand these backgrounds, we have studied Helium- and Argon-filled ionization chambers exposed to intense neutron fluxes from PuBe neutron sources ($E_n=1-10$ MeV). The sources emit about 10…
▽ More
Ion chambers used to monitor the secondary hadron and tertiary muon beam in the NuMI neutrino beamline will be exposed to background particles, including low energy neutrons produced in the beam dump. To understand these backgrounds, we have studied Helium- and Argon-filled ionization chambers exposed to intense neutron fluxes from PuBe neutron sources ($E_n=1-10$ MeV). The sources emit about 10$^8$ neutrons per second. The number of ion pairs in the chamber gas volume per incident neutron is derived. While limited in precision because of a large gamma ray background from the PuBe sources, our results are consistent with the expectation that the neutrons interact purely elastically in the chamber gas.
△ Less
Submitted 4 May, 2004;
originally announced May 2004.
-
The Hadron Hose: Continuous Toroidal Focusing for Conventional Neutrino Beams
Authors:
J. Hylen,
D. Bogert,
R. Ducar,
V. Garkusha,
J. Hall,
C. Jensen,
S. E. Kopp,
M. Kostin,
A. Lyukov,
A. Marchionni,
M. May,
M. D. Messier,
R. Milburn,
F. Novoskoltsev,
M. Proga,
D. Pushka,
W. Smart,
J. Walton,
V. Zarucheisky,
R. M. Zwaska
Abstract:
We have developed a new focusing system for conventional neutrino beams. The ``Hadron Hose'' is a wire located in the meson decay volume, downstream of the target and focusing horns. The wire is pulsed with high current to provide a toroidal magnetic field which continuously focuses mesons. The hose increases the neutrino event rate and reduces differences between near-field and far-field neutri…
▽ More
We have developed a new focusing system for conventional neutrino beams. The ``Hadron Hose'' is a wire located in the meson decay volume, downstream of the target and focusing horns. The wire is pulsed with high current to provide a toroidal magnetic field which continuously focuses mesons. The hose increases the neutrino event rate and reduces differences between near-field and far-field neutrino spectra for oscillation experiments. We have studied this device as part of the development of the Neutrinos at the Main Injector (NuMI) project, but it might also be of use for other conventional neutrino beams.
△ Less
Submitted 21 October, 2002;
originally announced October 2002.
