-
The limitations of a standard phase-field model in reproducing jointing in sedimentary rock layers
Authors:
Edoardo Pezzulli,
Patrick Zulian,
Alena Kopaničáková,
Rolf Krause,
Thomas Driesner
Abstract:
Geological applications of phase-field methods for fracture are notably scarce. This work conducts a numerical examination of the applicability of standard phase-field models in reproducing jointing within sedimentary layers. We explore how the volumetric-deviatoric split alongside the AT1 and AT2 phase-field formulations have several advantages in simulating jointing, but also have intrinsic limi…
▽ More
Geological applications of phase-field methods for fracture are notably scarce. This work conducts a numerical examination of the applicability of standard phase-field models in reproducing jointing within sedimentary layers. We explore how the volumetric-deviatoric split alongside the AT1 and AT2 phase-field formulations have several advantages in simulating jointing, but also have intrinsic limitations that prevent a reliable quantitative analysis of rock fracture. The formulations qualitatively reproduce the process of joint saturation, along with the negative correlation between joint spacing and the height of the sedimentary layer. However, in quantitative comparison to alternative numerical methods and outcrop observations, the phase-field method overestimates joint spacings by a factor of 2 and induces unrealistic compressive fractures in the AT1 model, alongside premature shearing at layer interfaces for the AT2 model. The causes are identified to be intrinsic to the phase-field lengthscale and the unsuitable strength envelope arising from the Volumetric-Deviatoric split. Finally, our analysis elucidates on the phase-field lengthscale's distortion of the stress field around dilating fractures, causing the sedimentary layer to reach joint saturation prematurely, thereby stopping the nucleation of new fractures and leading to larger joint spacings than in natural examples. Decreasing the lengthscale results in gradual improvement but becomes prohibitively computationally expensive for very small lengthscales such that the limit of ``natural'' behavior was not reached in this study. Overall, our results motivate the development of constitutive phase-field models that are more suitable for geological applications and their benchmarking against geological observations.
△ Less
Submitted 26 August, 2024;
originally announced August 2024.
-
Comparison and Application of non-Conforming Mesh Models for Flow in Fractured Porous Media using dual {L}agrange multipliers
Authors:
Patrick Zulian,
Philipp Schädle,
Liudmila Karagyaur,
Maria Nestola
Abstract:
Geological settings with reservoir characteristics include fractures with different material and geometrical properties. Hence, numerical simulations in applied geophysics demands for computational frameworks which efficiently allow to integrate various fracture geometries in a porous medium matrix. This study presents a modeling approach for single-phase flow in fractured porous media and its app…
▽ More
Geological settings with reservoir characteristics include fractures with different material and geometrical properties. Hence, numerical simulations in applied geophysics demands for computational frameworks which efficiently allow to integrate various fracture geometries in a porous medium matrix. This study presents a modeling approach for single-phase flow in fractured porous media and its application to different types of non-conforming mesh models. We propose a combination of the Lagrange multiplier method with variational transfer to allow for complex non-conforming geometries as well as hybrid- and equi-dimensional models and discretizations of flow through fractured porous media. The variational transfer is based on the $L^2$-projection and enables an accurate and highly efficient parallel projection of fields between non-conforming meshes (e.g.,\ between fracture and porous matrix domain). We present the different techniques as a unified mathematical framework with a practical perspective. By means of numerical examples we discuss both, performance and applicability of the particular strategies. Comparisons of finite element simulation results to widely adopted 2D benchmark cases show good agreement and the dual Lagrange multiplier spaces show good performance. In an extension to 3D fracture networks, we first provide complementary results to a recently developed benchmark case, before we explore a complex scenario which leverages the different types of fracture meshes. Complex and highly conductive fracture networks are found more suitable in combination with embedded hybrid-dimensional fractures. However, thick and blocking fractures are better approximated by equi-dimensional embedded fractures and the equi-dimensional mortar method, respectively.
△ Less
Submitted 14 August, 2020;
originally announced August 2020.
-
Large scale simulation of pressure induced phase-field fracture propagation using Utopia
Authors:
Patrick Zulian,
Alena Kopaničáková,
Maria Giuseppina Chiara Nestola,
Andreas Fink,
Nur Aiman Fadel,
Joost Vandevondele,
Rolf Krause
Abstract:
Non-linear phase field models are increasingly used for the simulation of fracture propagation models. The numerical simulation of fracture networks of realistic size requires the efficient parallel solution of large coupled non-linear systems. Although in principle efficient iterative multi-level methods for these types of problems are available, they are not widely used in practice due to the co…
▽ More
Non-linear phase field models are increasingly used for the simulation of fracture propagation models. The numerical simulation of fracture networks of realistic size requires the efficient parallel solution of large coupled non-linear systems. Although in principle efficient iterative multi-level methods for these types of problems are available, they are not widely used in practice due to the complexity of their parallel implementation.
Here, we present Utopia, which is an open-source C++ library for parallel non-linear multilevel solution strategies. Utopia provides the advantages of high-level programming interfaces while at the same time a framework to access low-level data-structures without breaking code encapsulation. Complex numerical procedures can be expressed with few lines of code, and evaluated by different implementations, libraries, or computing hardware. In this paper, we investigate the parallel performance of our implementation of the recursive multilevel trust-region (RMTR) method based on the Utopia library. RMTR is a globally convergent multilevel solution strategy designed to solve non-convex constrained minimization problems. In particular, we solve pressure-induced phase-field fracture propagation in large and complex fracture networks. Solving such problems is deemed challenging even for a few fractures, however, here we are considering networks of realistic size with up to 1000 fractures.
△ Less
Submitted 25 July, 2020;
originally announced July 2020.
-
3D non-conforming mesh model for flow in fractured porous media using Lagrange multipliers
Authors:
Philipp Schädle,
Patrick Zulian,
Daniel Vogler,
Sthavishtha Bhopalam R.,
Maria G. C. Nestola,
Anozie Ebigbo,
Rolf Krause,
Martin O. Saar
Abstract:
This work presents a modeling approach for single-phase flow in 3D fractured porous media with non-conforming meshes. To this end, a Lagrange multiplier method is combined with a parallel $L^2$-projection variational transfer approach. This Lagrange multiplier method enables the use of non-conforming meshes and depicts the variable coupling between fracture and matrix domain. The $L^2$-projection…
▽ More
This work presents a modeling approach for single-phase flow in 3D fractured porous media with non-conforming meshes. To this end, a Lagrange multiplier method is combined with a parallel $L^2$-projection variational transfer approach. This Lagrange multiplier method enables the use of non-conforming meshes and depicts the variable coupling between fracture and matrix domain. The $L^2$-projection variational transfer allows general, accurate, and parallel projection of variables between non-conforming meshes (i.e. between fracture and matrix domain). Comparisons of simulations with 2D benchmarks show good agreement, and the method is further validated on 3D fracture networks by comparing it to results from conforming mesh simulations which were used as a reference. Application to realistic fracture networks with hundreds of fractures is demonstrated. Mesh size and mesh convergence are investigated for benchmark cases and 3D fracture network applications. Results demonstrate that the Lagrange multiplier method, in combination with the $L^2$-projection method, is capable of modeling single-phase flow through realistic 3D fracture networks.
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
Contact between rough rock surfaces using a dual mortar method
Authors:
Cyrill von Planta,
Daniel Vogler,
Patrick Zulian,
Martin O. Saar,
Rolf Krause
Abstract:
The mechanical behavior of fractures in solids, such as rocks, has strong implications for reservoir engineering applications. Deformations, and the corresponding change in solid contact area and aperture field, impact rock fracture stiffness and permeability thus altering the reservoir properties significantly. Simulating contact between fractures is numerically difficult as the non-penetration c…
▽ More
The mechanical behavior of fractures in solids, such as rocks, has strong implications for reservoir engineering applications. Deformations, and the corresponding change in solid contact area and aperture field, impact rock fracture stiffness and permeability thus altering the reservoir properties significantly. Simulating contact between fractures is numerically difficult as the non-penetration constraints lead to a nonlinear problem and the surface meshes of the solid bodies on the opposing fracture sides may be non-matching. Furthermore, the challenging geometry of the arising constraints requires to solve the problem in several iterations, adjusting the constraints in each one. Here we present a novel discrete implementation of a dual mortar method and a non-smooth SQP solver, suitable for parallel computing, and apply it to a two body contact problem consisting of realistic rock fracture geometries from the Grimsel underground laboratory in Switzerland. The contributions of this article are: 1) a novel, parallel implementation of a dual mortar method and non-smooth SQP method, 2) realistic rock geometries with rough surfaces, and 3) numerical examples, which prove that the dual mortar method is capable of replicating the nonlinear closure behavior of fractures, observed in laboratory experiments.
△ Less
Submitted 5 September, 2019; v1 submitted 7 November, 2018;
originally announced November 2018.
-
An immersed boundary method for fluid-structure interaction based on overlapping domain decomposition
Authors:
Maria Giuseppina Chiara Nestola,
Barna Becsek,
Hadi Zolfaghari,
Patrick Zulian,
Dario De Marinis,
Rolf Krause,
Dominik Obrist
Abstract:
We present a novel framework inspired by the Immersed Boundary Method for predicting the fluid-structure interaction of complex structures immersed in flows with moderate to high Reynolds numbers. The main novelties of the proposed fluid-structure interaction framework are 1) the use of elastodynamics equations for the structure, 2) the use of a high-order Navier-Stokes solver for the flow, and 3)…
▽ More
We present a novel framework inspired by the Immersed Boundary Method for predicting the fluid-structure interaction of complex structures immersed in flows with moderate to high Reynolds numbers. The main novelties of the proposed fluid-structure interaction framework are 1) the use of elastodynamics equations for the structure, 2) the use of a high-order Navier-Stokes solver for the flow, and 3) the variational transfer (L2-projection) for coupling the solid and fluid subproblems. The dynamic behavior of a deformable structure is simulated in a finite element framework by adopting a fully implicit scheme for its temporal integration. It allows for mechanical constitutive laws including nonhomogeneous and fiber-reinforced materials. The Navier-Stokes equations for the incompressible flow are discretized with high-order finite differences which allow for the direct numerical simulation of laminar, transitional and turbulent flows. The structure and the flow solvers are coupled by using an L2-projection method for the transfer of velocities and forces between the fluid grid and the solid mesh. This strategy allows for the numerical solution of coupled large scale problems based on nonconforming structured and unstructured grids. The framework is validated with the Turek-Hron benchmark and a newly proposed benchmark modelling the flow-induced oscillation of an inert plate. A three-dimensional simulation of an elastic beam in transitional flow is provided to show the solver's capability of coping with anisotropic elastic structures immersed in complex fluid flow.
△ Less
Submitted 28 October, 2018;
originally announced October 2018.
