Showing 1–19 of 19 results for author: Zippelius, A

Amoeboid propulsion of active solid bodies, vesicles and droplets: a comparison

Authors: Reiner Kree, Annette Zippelius

Abstract: We present a unified discussion of three types of near-spherical amoeboid microswimmers, driven by periodic, axially symmetric, achiral deformations (swim strokes): a solid deformable body, a vesicle with incompressible fluid membrane, and a droplet. Minimal models are used, which characterize the swimmer type only by boundary conditions. We calculate the swimming velocities, the dissipated power… ▽ More We present a unified discussion of three types of near-spherical amoeboid microswimmers, driven by periodic, axially symmetric, achiral deformations (swim strokes): a solid deformable body, a vesicle with incompressible fluid membrane, and a droplet. Minimal models are used, which characterize the swimmer type only by boundary conditions. We calculate the swimming velocities, the dissipated power and the Lighthill efficiencies within a second order perturbation expansion in the small deformation amplitudes. %Our approach uses spherical harmonics to represent surface deformations and a system of general solutions of the Stokes equation based on vector spherical harmonics. For solid bodies, we reproduce older results by Lighthill and Blake, for vesicles and for droplets we add new results. The unified approach allows for a detailed comparison between the three types of microswimmers. We present such comparisons for swim strokes made up of spherical harmonics of adjacent orders $l$ and $l+1$, as well as for a manifold of swim strokes, made up of spherical harmonics up to order $l=4$, which respect volume- and surface-incompressibility. This manifold is two-dimensional, which allows to present swimming velocities and efficiencies in a compact graphical form. In a race in which each swimmer can choose the stroke that maximizes its speed, the droplet always comes in first, the vesicle comes in second, while the particle finishes third. However, if the three swimmers perform the same stroke, other order of rankings become possible. The maximum of the total efficiency of a droplet is greater than that of a vesicle if the internal dissipation is small. The efficiency of the solid body turns out to be typically two orders of magnitude smaller than that of vesicles and droplets. Optimizing the Lighthill efficiency and optimizing the swimming velocity result in different optimal swim strokes △ Less

Submitted 12 February, 2025; originally announced February 2025.

Deformations of an active liquid droplet

Authors: Reiner Kree, Annette Zippelius

Abstract: A fluid droplet in general deforms, if subject to active driving, such as a finite slip velocity or active tractions on its interface. We show that these deformations and their dynamics can be computed analytically in a perturbation theory in the inverse surface tension using an approach based on vector spherical harmonics. In lowest order, the deformation is of first order, yet it affects the flo… ▽ More A fluid droplet in general deforms, if subject to active driving, such as a finite slip velocity or active tractions on its interface. We show that these deformations and their dynamics can be computed analytically in a perturbation theory in the inverse surface tension using an approach based on vector spherical harmonics. In lowest order, the deformation is of first order, yet it affects the flow fields inside and outside of the droplet in zeroth order. Hence a correct description of the flow has to allow for shape fluctuations, even in the limit of large surface tension. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Mobilities of a drop and an encapsulated squirmer

Authors: Reiner Kree, Annette Zippelius

Abstract: We have analyzed the dynamics of a spherical, uni-axial squirmer which is located inside a spherical liquid drop at general position $\bm{r}_s$. The squirmer is subject to an external force and torque in addition to the slip velocity on its surface. We have derived exact analytical expressions for the linear and rotational velocity of the squirmer as well as the linear velocity of the drop for gen… ▽ More We have analyzed the dynamics of a spherical, uni-axial squirmer which is located inside a spherical liquid drop at general position $\bm{r}_s$. The squirmer is subject to an external force and torque in addition to the slip velocity on its surface. We have derived exact analytical expressions for the linear and rotational velocity of the squirmer as well as the linear velocity of the drop for general, non-axisymmetric configurations. The mobilities of both, squirmer and drop, are in general anisotropic, depending on the orientation of $\bm{r}_s$, relative to squirmer axis, external force or torque. We discuss their dependence on the size of the squirmer, its distance from the center of the drop and the viscosities. Our results provide a first step towards a discussion of the trajectories of the composite system of drop and enclosed squirmer. △ Less

Submitted 9 November, 2021; originally announced November 2021.

Dynamics of a droplet driven by an internal active device

Authors: Reiner Kree, Leon Rueckert, Annette Zippelius

Abstract: A liquid droplet, immersed into a Newtonian fluid, can be propelled solely by internal flow. In a simple model, this flow is generated by a collection of point forces, which represent externally actuated devices or model autonomous swimmers. We work out the general framework to compute the self-propulsion of the droplet as a function of the actuating forces and their positions within the droplet.… ▽ More A liquid droplet, immersed into a Newtonian fluid, can be propelled solely by internal flow. In a simple model, this flow is generated by a collection of point forces, which represent externally actuated devices or model autonomous swimmers. We work out the general framework to compute the self-propulsion of the droplet as a function of the actuating forces and their positions within the droplet. A single point force, F with general orientation and position, r_0, gives rise to both, translational and rotational motion of the droplet. We show that the translational mobility is anisotropic and the rotational mobility can be nonmonotonic as a function of | r_0|, depending on the viscosity contrast. Due to the linearity of the Stokes equation, superposition can be used to discuss more complex arrays of point forces. We analyse force dipoles, such as a stresslet, a simple model of a biflagellate swimmer and a rotlet, representing a helical swimmer, driven by an external magnetic field. For a general force distribution with arbitrary high multipole moments the propulsion properties of the droplet depend only on a few low order multipoles: up to the quadrupole for translational and up to a special octopole for rotational motion. The coupled motion of droplet and device is discussed for a few exemplary cases. We show in particular that a biflagellate swimmer, modeled as a stresslet, achieves a steady comoving state, where the position of the device relative to the droplet remains fixed. In fact there are two fixpoints, symmetric with respect to the center of the droplet. A tiny external force selects one of them and allows to switch between forward and backward motion. △ Less

Submitted 18 April, 2020; originally announced April 2020.

Comments: arXiv admin note: text overlap with arXiv:1902.01159

Journal ref: Phys. Rev. Fluids 6, 034201 (2021)

Chaos and mixing in self-propelled droplets

Authors: Reiner Kree, Annette Zippelius

Abstract: We consider self-propelled droplets which are driven by internal flow. Tracer particles, which are advected by the flow, in general follow chaotic trajectories, even though the motion of the autonomous swimmer is completely regular. The flow is mixing, and for Péclet and Batchelor numbers, which are realized e.g. in eucaryotic cells, advective mixing can substantially accelerate and even dominate… ▽ More We consider self-propelled droplets which are driven by internal flow. Tracer particles, which are advected by the flow, in general follow chaotic trajectories, even though the motion of the autonomous swimmer is completely regular. The flow is mixing, and for Péclet and Batchelor numbers, which are realized e.g. in eucaryotic cells, advective mixing can substantially accelerate and even dominate transport by diffusion. △ Less

Submitted 4 November, 2019; v1 submitted 4 June, 2019; originally announced June 2019.

Journal ref: Phys. Rev. Fluids 4, 113102 (2019)

Self propulsion of droplets driven by an active permeating gel

Authors: Reiner Kree, Annette Zippelius

Abstract: We discuss the flow field and propulsion velocity of active droplets, which are driven by body forces residing on a rigid gel. The latter is modelled as a porous medium which gives rise to permeation forces. In the simplest model, the Brinkman equation, the porous medium is characterised by a single length scale $\ell$ --the square root of the permeability. We compute the flow fields inside and ou… ▽ More We discuss the flow field and propulsion velocity of active droplets, which are driven by body forces residing on a rigid gel. The latter is modelled as a porous medium which gives rise to permeation forces. In the simplest model, the Brinkman equation, the porous medium is characterised by a single length scale $\ell$ --the square root of the permeability. We compute the flow fields inside and outside of the droplet as well as the energy dissipation as a function of $\ell$. We furthermore show that there are optimal gel fractions, giving rise to maximal linear and rotational velocities. In the limit $\ell\to\infty$, corresponding to a very dilute gel, we recover Stokes flow. The opposite limit, $\ell\to 0$, corresponding to a space filling gel, is singular and not equivalent to Darcy's equation, which cannot account for self-propulsion. △ Less

Submitted 23 March, 2018; originally announced March 2018.

Integration through transients for inelastic hard sphere fluids

Authors: W. Till Kranz, Fabian Frahsa, Annette Zippelius, Matthias Fuchs, Matthias Sperl

Abstract: We compute the rheological properties of inelastic hard spheres in steady shear flow for general shear rates and densities. Starting from the microscopic dynamics we generalise the Integration Through Transients (\textsc{itt}) formalism to a fluid of dissipative, randomly driven granular particles. The stress relaxation function is computed approximately within a mode-coupling theory---based on th… ▽ More We compute the rheological properties of inelastic hard spheres in steady shear flow for general shear rates and densities. Starting from the microscopic dynamics we generalise the Integration Through Transients (\textsc{itt}) formalism to a fluid of dissipative, randomly driven granular particles. The stress relaxation function is computed approximately within a mode-coupling theory---based on the physical picture, that relaxation of shear is dominated by slow structural relaxation, as the glass transition is approached. The transient build-up of stress in steady shear is thus traced back to transient density correlations which are computed self-consistently within mode-coupling theory. The glass transition is signalled by the appearance of a yield stress and a divergence of the Newtonian viscosity, characterizing linear response. For shear rates comparable to the structural relaxation time, the stress becomes independent of shear rate and we observe shear thinning, while for the largest shear rates Bagnold scaling, i.e., a quadratic increase of shear stress with shear rate, is recovered. The rheological properties are qualitatively similar for all values of $\varepsilon$, the coefficient of restitution; however, the magnitude of the stress as well as the range of shear thinning and thickening show significant dependence on the inelasticity. △ Less

Submitted 29 February, 2020; v1 submitted 12 October, 2017; originally announced October 2017.

Comments: 37 pages, 7 figures

Journal ref: Phys. Rev. Fluids 5, 024305 (2020)

Rheology of inelastic hard spheres at finite density and shear rate

Authors: W. Till Kranz, Fabian Frahsa, Annette Zippelius, Matthias Fuchs, Matthias Sperl

Abstract: Considering a granular fluid of inelastic smooth hard spheres we discuss the conditions delineating the rheological regimes comprising Newtonian, Bagnoldian, shear thinning, and shear thickening behavior. Developing a kinetic theory, valid at finite shear rates and densities around the glass transition density, we predict the viscosity and Bagnold coefficient at practically relevant values of the… ▽ More Considering a granular fluid of inelastic smooth hard spheres we discuss the conditions delineating the rheological regimes comprising Newtonian, Bagnoldian, shear thinning, and shear thickening behavior. Developing a kinetic theory, valid at finite shear rates and densities around the glass transition density, we predict the viscosity and Bagnold coefficient at practically relevant values of the control parameters. The determination of full flow curves relating the shear stress $σ$ to the shear rate $\dotγ$, and predictions of the yield stress complete our discussion of granular rheology derived from first principles. △ Less

Submitted 11 July, 2018; v1 submitted 12 October, 2017; originally announced October 2017.

Comments: 7 pages, minor fixes and extended appendix

Journal ref: Phys. Rev. Lett. 121, 148002 (2018)

Elasticity of a semiflexible filament with a discontinuous tension due to a cross-link or a molecular motor

Authors: Mohammadhosein Razbin, Panayotis Benetatos, Annette Zippelius

Abstract: We analyze the stretching elasticity of a wormlike chain with a tension discontinuity resulting from a Hookean spring connecting its backbone to a fixed point. The elasticity of isolated semiflexible filaments has been the subject in a significant body of literature, primarily because of its relevance to the mechanics of biological matter. In real systems, however, these filaments are usually part… ▽ More We analyze the stretching elasticity of a wormlike chain with a tension discontinuity resulting from a Hookean spring connecting its backbone to a fixed point. The elasticity of isolated semiflexible filaments has been the subject in a significant body of literature, primarily because of its relevance to the mechanics of biological matter. In real systems, however, these filaments are usually part of supramolecular structures involving cross-linkers or molecular motors which cause tension discontinuities. Our model is intended as a minimal structural element incorporating such a discontinuity. We obtain analytical results in the weakly bending limit of the filament, concerning its force-extension relation and the response of the two parts in which the filament is divided by the spring. For a small tension discontinuity, the linear response of the filament extension to this discontinuity strongly depends on the external tension. For large external tension $f$, the spring force contributes a subdominant correction $\sim 1/f^{3/2}$ to the well known $\sim 1/\sqrt{f}$ dependence of the end-to-end extension. △ Less

Submitted 24 May, 2016; originally announced May 2016.

Journal ref: Physical Review E 93.5 (2016): 052408

Mechanical properties of branched actin filaments

Authors: Mohammadhosein Razbin, Martin Falcke, Panayotis Benetatos, Annette Zippelius

Abstract: Cells moving on a two dimensional substrate generate motion by polymerizing actin filament networks inside a flat membrane protrusion. New filaments are generated by branching off existing ones, giving rise to branched network structures. We investigate the force-extension relation of branched filaments, grafted on an elastic structure at one end and pushing with the free ends against the leading… ▽ More Cells moving on a two dimensional substrate generate motion by polymerizing actin filament networks inside a flat membrane protrusion. New filaments are generated by branching off existing ones, giving rise to branched network structures. We investigate the force-extension relation of branched filaments, grafted on an elastic structure at one end and pushing with the free ends against the leading edge cell membrane. Single filaments are modeled as worm-like chains, whose thermal bending fluctuations are restricted by the leading edge cell membrane, resulting in an effective force. Branching can increase the stiffness considerably; however the effect depends on branch point position and filament orientation, being most pronounced for intermediate tilt angles and intermediate branch point positions. We describe filament networks without cross-linkers to focus on the effect of branching. We use randomly positioned branch points, as generated in the process of treadmilling, and orientation distributions as measured in lamellipodia. These networks reproduce both the weak and strong force response of lamellipodia as measured in force-velocity experiments. We compare properties of branched and unbranched networks. The ratio of the network average of the force per branched filament to the average force per unbranched filament depends on the orientation distribution of the filaments. The ratio exhibits compression dependence and may go up to about 4.5 in networks with a narrow orientation distribution. With orientation distributions measured in lamellipodia, it is about two and essentially independent from network compression, graft elasticity and filament persistence length. △ Less

Submitted 26 June, 2015; originally announced June 2015.

Journal ref: 2015 Phys. Biol. 12 046007

Tension-induced binding of semiflexible biopolymers

Authors: Panayotis Benetatos, Alice von der Heydt, Annette Zippelius

Abstract: We investigate theoretically the effect of polymer tension on the collective behavior of reversibly binding cross-links. For this purpose, we employ a model of two weakly bending wormlike chains aligned in parallel by a tensile force, with a sequence of inter-chain binding sites regularly spaced along the contours. Reversible cross-links attach and detach at the sites with an affinity controlled b… ▽ More We investigate theoretically the effect of polymer tension on the collective behavior of reversibly binding cross-links. For this purpose, we employ a model of two weakly bending wormlike chains aligned in parallel by a tensile force, with a sequence of inter-chain binding sites regularly spaced along the contours. Reversible cross-links attach and detach at the sites with an affinity controlled by a chemical potential. In a mean-field approach, we calculate the free energy of the system and find the emergence of a free-energy barrier which controls the reversible (un)binding. The tension affects the conformational entropy of the chains which competes with the binding energy of the cross-links. This competition gives rise to a sudden increase in the fraction of bound sites as the tension increases. We show that this transition is related to the cross-over between weak and strong localization of a directed polymer in a pinning potential. The cross-over to the strongly bound state can be interpreted as a mechanism for force-stiffening of cross-linked polymers -- beyond the elasticity of a single wormlike chain. △ Less

Submitted 3 October, 2014; v1 submitted 20 June, 2014; originally announced June 2014.

Comments: 7 pages, 7 figures; accepted for publication in New J. Phys

Journal ref: New J. Phys. 16, 113037 (2014)

Elasticity of cross-linked semiflexible biopolymers under tension

Authors: Alice von der Heydt, Daniel Wilkin, Panayotis Benetatos, Annette Zippelius

Abstract: Aiming at the mechanical properties of cross-linked biopolymers, we set up and analyze a model of two weakly bending wormlike chains subjected to a tensile force, with regularly spaced inter-chain bonds (cross-links) represented by harmonic springs. Within this model, we compute the force-extension curve and the differential stiffness exactly and discuss several limiting cases. Cross-links effecti… ▽ More Aiming at the mechanical properties of cross-linked biopolymers, we set up and analyze a model of two weakly bending wormlike chains subjected to a tensile force, with regularly spaced inter-chain bonds (cross-links) represented by harmonic springs. Within this model, we compute the force-extension curve and the differential stiffness exactly and discuss several limiting cases. Cross-links effectively stiffen the chain pair by reducing thermal fluctuations transverse to the force and alignment direction. The extra alignment due to cross-links increases both with growing number and with growing strength of the cross-links, and is most prominent for small force f. For large f, the additional, cross-link-induced extension is subdominant except for the case of linking the chains rigidly and continuously along their contour. In this combined limit, we recover asymptotically the elasticity of a weakly bending wormlike chain without constraints, stiffened by a factor four. The increase in differential stiffness can be as large as 100% for small f or large numbers of cross-links. △ Less

Submitted 5 May, 2013; originally announced May 2013.

Comments: 11 pages, 6 figures, submitted to PRE

Journal ref: PRE 88, 032701 (2013)

Anomalous velocity distributions in active Brownian suspensions

Authors: Andrea Fiege, Benjamin Vollmayr-Lee, Annette Zippelius

Abstract: Large scale simulations and analytical theory have been combined to obtain the non-equilibrium velocity distribution, $f(v)$, of randomly accelerated particles in suspension. The simulations are based on an event-driven algorithm, generalised to include friction. They reveal strongly anomalous but largely universal distributions which are independent of volume fraction and collision processes, whi… ▽ More Large scale simulations and analytical theory have been combined to obtain the non-equilibrium velocity distribution, $f(v)$, of randomly accelerated particles in suspension. The simulations are based on an event-driven algorithm, generalised to include friction. They reveal strongly anomalous but largely universal distributions which are independent of volume fraction and collision processes, which suggests a one-particle model should capture all the essential features. We have formulated this one-particle model and solved it analytically in the limit of strong damping, where we find that $f(v)$ decays as $1/v$ for multiple decades, eventually crossing over to a Gaussian decay for the largest velocities. Many particle simulations and numerical solution of the one-particle model agree for all values of the damping. △ Less

Submitted 8 July, 2013; v1 submitted 5 March, 2013; originally announced March 2013.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. E 88, 022138 (2013)

Force-extension relation of cross-linked anisotropic polymer networks

Authors: Panayotis Benetatos, Stephan Ulrich, Annette Zippelius

Abstract: Cross-linked polymer networks with orientational order constitute a wide class of soft materials and are relevant to biological systems (e.g., F-actin bundles). We analytically study the nonlinear force-extension relation of an array of parallel-aligned, strongly stretched semiflexible polymers with random cross-links. In the strong stretching limit, the effect of the cross-links is purely entropi… ▽ More Cross-linked polymer networks with orientational order constitute a wide class of soft materials and are relevant to biological systems (e.g., F-actin bundles). We analytically study the nonlinear force-extension relation of an array of parallel-aligned, strongly stretched semiflexible polymers with random cross-links. In the strong stretching limit, the effect of the cross-links is purely entropic, independent of the bending rigidity of the chains. Cross-links enhance the differential stretching stiffness of the bundle. For hard cross-links, the cross-link contribution to the force-extension relation scales inversely proportional to the force. Its dependence on the cross-link density, close to the gelation transition, is the same as that of the shear modulus. The qualitative behavior is captured by a toy model of two chains with a single cross-link in the middle. △ Less

Submitted 1 May, 2012; originally announced May 2012.

Comments: 7 pages, 4 figures

Journal ref: New J. Phys. 14, 115011 (2012)

Orientational order and glassy states in networks of semiflexible polymers

Authors: Martin Kiemes, Panayotis Benetatos, Annette Zippelius

Abstract: Motivated by the structure of networks of cross-linked cytoskeletal biopolymers, we study the orientationally ordered phases in two-dimensional networks of randomly cross-linked semiflexible polymers. We consider permanent cross-links which prescribe a finite angle and treat them as quenched disorder in a semi-microscopic replica field theory. Starting from a fluid of un-cross-linked polymers and… ▽ More Motivated by the structure of networks of cross-linked cytoskeletal biopolymers, we study the orientationally ordered phases in two-dimensional networks of randomly cross-linked semiflexible polymers. We consider permanent cross-links which prescribe a finite angle and treat them as quenched disorder in a semi-microscopic replica field theory. Starting from a fluid of un-cross-linked polymers and small polymer clusters (sol) and increasing the cross-link density, a continuous gelation transition occurs. In the resulting gel, the semiflexible chains either display long range orientational order or are frozen in random directions depending on the value of the crossing angle, the crosslink concentration and the stiffness of the polymers. A crossing angle $θ\sim 2π/M$ leads to long range $M$-fold orientational order, e.g., "hexatic" or "tetratic" for $θ=60^{\circ}$ or $90^{\circ}$, respectively. The transition is discontinuous and the critical cross-link density depends on the bending stiffness of the polymers and the cross-link geometry: the higher the stiffness and the lower $M$, the lower the critical number of cross-links. In between the sol and the long range ordered state, we always observe a gel which is a statistically isotropic amorphous solid (SIAS) with random positional and random orientational localization of the participating polymers. △ Less

Submitted 6 March, 2011; v1 submitted 7 September, 2010; originally announced September 2010.

Comments: 20 pages, added references, minor changes, final version as published in PRE

Journal ref: Phys. Rev. E 83, 021905 (2011)

Anomalous stress relaxation in random macromolecular networks

Authors: Kurt Broderix, Henning Löwe, Peter Müller, Annette Zippelius

Abstract: Within the framework of a simple Rouse-type model we present exact analytical results for dynamical critical behaviour on the sol side of the gelation transition. The stress-relaxation function is shown to exhibit a stretched-exponential long-time decay. The divergence of the static shear viscosity is governed by the critical exponent $k=φ-β$, where $φ$ is the (first) crossover exponent of rando… ▽ More Within the framework of a simple Rouse-type model we present exact analytical results for dynamical critical behaviour on the sol side of the gelation transition. The stress-relaxation function is shown to exhibit a stretched-exponential long-time decay. The divergence of the static shear viscosity is governed by the critical exponent $k=φ-β$, where $φ$ is the (first) crossover exponent of random resistor networks, and $β$ is the critical exponent for the gel fraction. We also derive new results on the behaviour of normal stress coefficients. △ Less

Submitted 27 July, 2001; originally announced July 2001.

Comments: 13 pages, 6 figures; contribution to the proceedings of the Minerva International Workshop on Frontiers In The Physics Of Complex Systems (25-28 March 2001) - to appear in a special issue of Physica A

Journal ref: Physica A, vol. 302, pp. 279-289 (2001)

Normal stresses at the gelation transition

Authors: Kurt Broderix, Peter Müller, Annette Zippelius

Abstract: A simple Rouse-type model, generalised to incorporate the effects of chemical crosslinks, is used to obtain a theoretical prediction for the critical behaviour of the normal-stress coefficients $Ψ_{1}$ and $Ψ_{2}$ at the gelation transition. While the exact calculation shows $Ψ_{2}\equiv 0$, a typical result for these types of models, an additional scaling ansatz is used to demonstrate that… ▽ More A simple Rouse-type model, generalised to incorporate the effects of chemical crosslinks, is used to obtain a theoretical prediction for the critical behaviour of the normal-stress coefficients $Ψ_{1}$ and $Ψ_{2}$ at the gelation transition. While the exact calculation shows $Ψ_{2}\equiv 0$, a typical result for these types of models, an additional scaling ansatz is used to demonstrate that $Ψ_{1}$ diverges with a critical exponent $\ell = k+z$. Here, $k$ denotes the critical exponent of the shear viscosity and $z$ the exponent governing the divergence of the time scale in the Kohlrausch decay of the shear-stress relaxation function. For crosslinks distributed according to mean-field percolation, this scaling relation yields $\ell =3$, in a accordance with an exact expression for the first normal-stress coefficient based on a replica calculation. Alternatively, using three-dimensional percolation for the crosslink ensemble we find the value $\ell \approx 4.9$. Results on time-dependent normal-stress response are also presented. △ Less

Submitted 8 November, 2001; v1 submitted 20 July, 2001; originally announced July 2001.

Comments: RevTeX4, 6 pages, 2 figures; changes: explanatory comments expanded

Journal ref: Phys. Rev. E, vol. 65, 041505 (2002)

Critical Dynamics of Gelation

Authors: Kurt Broderix, Henning Loewe, Peter Mueller, Annette Zippelius

Abstract: Shear relaxation and dynamic density fluctuations are studied within a Rouse model, generalized to include the effects of permanent random crosslinks. We derive an exact correspondence between the static shear viscosity and the resistance of a random resistor network. This relation allows us to compute the static shear viscosity exactly for uncorrelated crosslinks. For more general percolation m… ▽ More Shear relaxation and dynamic density fluctuations are studied within a Rouse model, generalized to include the effects of permanent random crosslinks. We derive an exact correspondence between the static shear viscosity and the resistance of a random resistor network. This relation allows us to compute the static shear viscosity exactly for uncorrelated crosslinks. For more general percolation models, which are amenable to a scaling description, it yields the scaling relation $ k=φ-β$ for the critical exponent of the shear viscosity. Here $β$ is the thermal exponent for the gel fraction and $φ$ is the crossover exponent of the resistor network. The results on the shear viscosity are also used in deriving upper and lower bounds on the incoherent scattering function in the long-time limit, thereby corroborating previous results. △ Less

Submitted 5 September, 2000; v1 submitted 6 July, 2000; originally announced July 2000.

Comments: 34 pages, 2 figures (revtex, amssymb); revised version (minor changes)

Journal ref: Phys. Rev. E, vol. 63, 011510 (2001)

Shear viscosity of a crosslinked polymer melt

Authors: Kurt Broderix, Henning Loewe, Peter Mueller, Annette Zippelius

Abstract: We investigate the static shear viscosity on the sol side of the vulcanization transition within a minimal mesoscopic model for the Rouse-dynamics of a randomly crosslinked melt of phantom polymers. We derive an exact relation between the viscosity and the resistances measured in a corresponding random resistor network. This enables us to calculate the viscosity exactly for an ensemble of crossl… ▽ More We investigate the static shear viscosity on the sol side of the vulcanization transition within a minimal mesoscopic model for the Rouse-dynamics of a randomly crosslinked melt of phantom polymers. We derive an exact relation between the viscosity and the resistances measured in a corresponding random resistor network. This enables us to calculate the viscosity exactly for an ensemble of crosslinks without correlations. The viscosity diverges logarithmically as the critical point is approached. For a more realistic ensemble of crosslinks amenable to the scaling description of percolation, we prove the scaling relation $k=φ-β$ between the critical exponent $k$ of the viscosity, the thermal exponent $β$ associated with the gel fraction and the crossover exponent $φ$ of a random resistor network. △ Less

Submitted 5 July, 1999; v1 submitted 27 November, 1998; originally announced November 1998.

Comments: 8 pages, uses Europhysics Letters style; Revisions: results extended

Journal ref: Europhys. Lett., 48 (4), pp. 421-427 (1999)