-
Stimulated Laser Cooling Using Microfabrication
Authors:
Chao Li,
Xiao Chai,
Linzhao Zhuo,
Bochao Wei,
Ardalan Lotfi,
Farrokh Ayazi,
Chandra Raman
Abstract:
We have achieved stimulated laser cooling of thermal rubidium atomic beams on a silicon chip. Following pre-collimation via a silicon microchannel array, we perform beam brightening via a blue-detuned optical molasses. Owing to the small size of the chip elements, we require only 8 mW, or nine times lower power than earlier free-space experiments on cesium [Aspect et al., Phys. Rev. Lett. 57, 1688…
▽ More
We have achieved stimulated laser cooling of thermal rubidium atomic beams on a silicon chip. Following pre-collimation via a silicon microchannel array, we perform beam brightening via a blue-detuned optical molasses. Owing to the small size of the chip elements, we require only 8 mW, or nine times lower power than earlier free-space experiments on cesium [Aspect et al., Phys. Rev. Lett. 57, 1688 (1986)]. Silicon micromirrors are fabricated and hand-assembled to precisely overlap a strong elliptical standing wave with a sheet-shaped atomic density distribution, with dimensions chosen precisely to match these. We reduce the transverse velocity spread to below 1 m/s within a total travel distance of 4.5 mm on a silicon substrate. We use Doppler-sensitive two-photon Raman spectroscopy to characterize the cooling. In contrast to time-of-flight methods utilized previously, this approach requires a much shorter apparatus to achieve similar resolution. This hybrid of passive and active collimation paves the way toward the construction of full-fledged atomic instruments, such as atomic beam clocks and gyroscopes, entirely on-chip through batch-fabricated processes.
△ Less
Submitted 26 August, 2022;
originally announced August 2022.
-
Collimated versatile atomic beam source with alkali dispensers
Authors:
Bochao Wei,
Alexandra Crawford,
Yorick Andeweg,
Linzhao Zhuo,
Chao Li,
Chandra Raman
Abstract:
Alkali metal dispensers have become an indispensable tool in the production of atomic vapors for magnetometry, alkali vapor cell clocks, and laser cooling experiments. A primary advantage of these dispensers is that they contain alkali metal in an inert form that can be exposed to air without hazard. However, their high temperature of operation (>600 C) is undesirable for many applications, as it…
▽ More
Alkali metal dispensers have become an indispensable tool in the production of atomic vapors for magnetometry, alkali vapor cell clocks, and laser cooling experiments. A primary advantage of these dispensers is that they contain alkali metal in an inert form that can be exposed to air without hazard. However, their high temperature of operation (>600 C) is undesirable for many applications, as it shifts the atomic speed distribution to higher values and presents a radiative heat source that can raise the temperature of its surroundings. For this reason, dispensers are typically not used in line-of-sight applications such as atomic beam generation. In this work, we present an integrated rubidium dispenser collimating device with a thickness of only 2 mm that produces a beam of atoms traveling primarily in the forward direction. We find that the collimator plate serves to both shield the dispenser's radiation as well as to moderate the velocity of the atomic beam so that the measured longitudinal speed distribution is comparable to that of an ordinary alkali oven at only a slightly elevated temperature of 200 C. To confirm our theory, we also constructed another compact apparatus consisting of a dispenser and a silicon collimator and the measurements support our conclusion. Our integrated dispenser collimator will particularly be useful in integrated photonics and cavity QED on chip, where a localized, directed source of Rb vapor in small quantities is needed.
△ Less
Submitted 14 February, 2022;
originally announced February 2022.
-
Producing slow light in warm alkali vapor using electromagnetically induced transparency
Authors:
Kenneth DeRose,
Kefeng Jiang,
Jianqiao Li,
Macbeth Julius,
Linzhao Zhuo,
Scott Wenner,
S. Bali
Abstract:
We present undergraduate-friendly instructions on how to produce light pulses propagating through warm Rubidium vapor with speeds less than 400 m/s, i.e., nearly a million times slower than c. We elucidate the role played by electromagnetically induced transparency (EIT) in producing slow light pulses, and discuss how to achieve the required experimental conditions. The optical set up is presented…
▽ More
We present undergraduate-friendly instructions on how to produce light pulses propagating through warm Rubidium vapor with speeds less than 400 m/s, i.e., nearly a million times slower than c. We elucidate the role played by electromagnetically induced transparency (EIT) in producing slow light pulses, and discuss how to achieve the required experimental conditions. The optical set up is presented, and details provided for preparation of pump, probe, and reference pulses of the required size, frequency, intensity, temporal width, and polarization purity. EIT-based slow light pulses provide the most widely studied architecture for creating quantum memories. Therefore, the basic concepts presented here are useful for physics and engineering majors who wish to get involved in the development of cutting-edge quantum technologies.
△ Less
Submitted 14 May, 2024; v1 submitted 18 November, 2020;
originally announced November 2020.
