Showing 1–50 of 207 results for author: Zhu, H

A novel plate-type phononic crystal for efficient vibration and noise attenuation performance

Authors: Hao Zhu, Kai Zhao

Abstract: Mitigating low-frequency vibration or noise is of vital importance to both human health and mechanical engineering. Two-dimensional phononic crystal (PC) structures were proposed by attaching rubber and metallic cylinders on one or both sides of a thin plate to attenuate low-frequency vibration via the local resonance mechanism. The finite element method was employed to evaluate the band structure… ▽ More Mitigating low-frequency vibration or noise is of vital importance to both human health and mechanical engineering. Two-dimensional phononic crystal (PC) structures were proposed by attaching rubber and metallic cylinders on one or both sides of a thin plate to attenuate low-frequency vibration via the local resonance mechanism. The finite element method was employed to evaluate the band structure and associated vibration modes of the proposed PC structures. It was found that the bandgap of the single-sided PC structure is narrower than that of the double-sided configuration. The formation mechanism of the flexural wave bandgap was analyzed based on the vibration modes. In particular, the influence of structural and material parameters on the band structure was systematically investigated. Finally, the accuracy of the calculated band structure and the effectiveness of the vibration and noise reduction performance were verified through simulations of vibration transmission characteristics and sound insulation curves. The results indicate that the proposed PC generates a relatively wide flexural wave bandgap in the low-frequency range, whose width and position can be flexibly tuned by adjusting structural and material parameters. These findings provide a novel approach for controlling low-frequency vibration and noise. △ Less

Submitted 25 June, 2025; originally announced June 2025.

Comments: 21 pages, 16 figures

Quantum-Classical Hybrid Quantized Neural Network

Authors: Wenxin Li, Chuan Wang, Hongdong Zhu, Qi Gao, Yin Ma, Hai Wei, Kai Wen

Abstract: Here in this work, we present a novel Quadratic Binary Optimization (QBO) model for quantized neural network training, enabling the use of arbitrary activation and loss functions through spline interpolation. We introduce Forward Interval Propagation (FIP), a method designed to tackle the challenges of non-linearity and the multi-layer composite structure in neural networks by discretizing activat… ▽ More Here in this work, we present a novel Quadratic Binary Optimization (QBO) model for quantized neural network training, enabling the use of arbitrary activation and loss functions through spline interpolation. We introduce Forward Interval Propagation (FIP), a method designed to tackle the challenges of non-linearity and the multi-layer composite structure in neural networks by discretizing activation functions into linear subintervals. This approach preserves the universal approximation properties of neural networks while allowing complex nonlinear functions to be optimized using quantum computers, thus broadening their applicability in artificial intelligence. We provide theoretical upper bounds on the approximation error and the number of Ising spins required, by deriving the sample complexity of the empirical risk minimization problem, from an optimization perspective. A significant challenge in solving the associated Quadratic Constrained Binary Optimization (QCBO) model on a large scale is the presence of numerous constraints. When employing the penalty method to handle these constraints, tuning a large number of penalty coefficients becomes a critical hyperparameter optimization problem, increasing computational complexity and potentially affecting solution quality. To address this, we employ the Quantum Conditional Gradient Descent (QCGD) algorithm, which leverages quantum computing to directly solve the QCBO problem. We prove the convergence of QCGD under a quantum oracle with randomness and bounded variance in objective value, as well as under limited precision constraints in the coefficient matrix. Additionally, we provide an upper bound on the Time-To-Solution for the QCBO solving process. Experimental results using a coherent Ising machine (CIM) demonstrate a 94.95% accuracy on the Fashion MNIST classification task, with only 1.1-bit precision. △ Less

Submitted 24 June, 2025; v1 submitted 22 June, 2025; originally announced June 2025.

Comments: 27 pages, 5 figures, comments are welcome

Global linear drift-wave eigenmode structures on flux surfaces in stellarators: ion temperature gradient mode

Authors: Hongxuan Zhu, H. Chen, Z. Lin, A. Bhattacharjee

Abstract: Turbulent transport greatly impacts the performance of stellarator magnetic confinement devices. While significant progress has been made on the numerical front, theoretical understanding of turbulence in stellarators is still lacking. In particular, due to nonaxisymmetry, different field lines couple within flux surfaces, the effects from which have yet to be adequately studied. In this work, we… ▽ More Turbulent transport greatly impacts the performance of stellarator magnetic confinement devices. While significant progress has been made on the numerical front, theoretical understanding of turbulence in stellarators is still lacking. In particular, due to nonaxisymmetry, different field lines couple within flux surfaces, the effects from which have yet to be adequately studied. In this work, we numerically simulate the linear electrostatic ion-temperature-gradient modes in stellarators using the global gyrokinetic particle-in-cell code GTC. We find that the linear eigenmode structures are nonuniform on flux surfaces and are localized at the downstream direction of the ion diamagnetic drift. Based on a simple model from Zocco etal [Phys. Plasmas 23, 082516 (2016); 27, 022507 (2020)], we show that the localization can be explained from the nonzero imaginary part of the binormal wavenumber. We further demonstrate that a localized surface-global eigenmode can be constructed from local gyrokinetic codes stella and GX, if we first solve the local dispersion relation with real wavenumbers at each field line, and then do an analytic continuation to the complex-wavenumber plane. These results suggest that the complex-wavenumber spectra from surface-global effects are required to understand linear drift-wave eigenmode structures in stellarators. △ Less

Submitted 15 June, 2025; originally announced June 2025.

Quantum Vacuum in Matter

Authors: Andrey Baydin, Hanyu Zhu, Motoaki Bamba, Kaden Hazzard, Junichiro Kono

Abstract: An intriguing consequence of quantum field theory is that vacuum is not empty space; it is full of quantum fluctuating electromagnetic fields, or virtual photons, corresponding to their zero-point energy, even though the average number of photons is zero. These short-lived vacuum fluctuations are behind some of the most fascinating physical processes in the universe, including spontaneous emission… ▽ More An intriguing consequence of quantum field theory is that vacuum is not empty space; it is full of quantum fluctuating electromagnetic fields, or virtual photons, corresponding to their zero-point energy, even though the average number of photons is zero. These short-lived vacuum fluctuations are behind some of the most fascinating physical processes in the universe, including spontaneous emission, the Lamb shift, and the Casimir force. Recent theory and experiments indicate that the properties of materials placed in photonic cavities may be altered, even in the complete absence of any external fields, through interaction with the fluctuating vacuum electromagnetic fields. Judicious engineering of the quantum vacuum surrounding the matter inside a cavity can lead to significant and nonintuitive modifications of electronic and vibrational states, producing a ``vacuum dressed'' material. These exciting new ideas have stimulated discussions regarding the fundamental physics of vacuum-matter interactions and also broadened the scope of potential applications using zero-point fluctuations to engineer materials. This Perspective will first discuss recent experimental and theoretical developments on vacuum-modified condensed matter systems, which usually require the realization of the so-called ultrastrong light-matter coupling regime. Then, we will overview some of the most promising cavity designs for enhancing vacuum electromagnetic fields in materials with various energy scales. Finally, we will discuss urgent open questions and technical challenges to be solved in this emerging field. △ Less

Submitted 2 June, 2025; originally announced June 2025.

Geometry effects on zonal flow dynamics and turbulent transport in optimized stellarators

Authors: Haotian Chen, Xishuo Wei, Hongxuan Zhu, Zhihong Lin

Abstract: Global gyrokinetic simulations find a strong suppression of ion temperature gradient (ITG) turbulence by zonal flows in stellarators optimized for neoclassical transport. The reduction of the ITG transport by the zonal flows in quasi-helicalsymmetric (QH) and quasi-isodynamic (QI) stellarators are much larger than a quasi-axisymmetric (QA) stellarator or a tokamak, thanks to higher linear residual… ▽ More Global gyrokinetic simulations find a strong suppression of ion temperature gradient (ITG) turbulence by zonal flows in stellarators optimized for neoclassical transport. The reduction of the ITG transport by the zonal flows in quasi-helicalsymmetric (QH) and quasi-isodynamic (QI) stellarators are much larger than a quasi-axisymmetric (QA) stellarator or a tokamak, thanks to higher linear residual levels and lower nonlinear frequencies of the zonal flows in the QH and QI. The transport level and energy confinement time in the QH and QI are similar to the tokamak with the same size and temperature gradient, despite the much larger linear growth rates in the stellarators. △ Less

Submitted 27 May, 2025; originally announced May 2025.

Comments: 4 pages, 4 figures,1 table

Quantum spin excitations in a dual-core magnetic molecule

Authors: Wenbin Li, Wenwen Shi, Xiaoxiao Xiao, Haiyan Zhu, Cai Cheng, Dongfei Wang, Lan Chen, Masahiro Haze, Huixia Fu, Xiao Zheng, Yang Guo, Zhendong Li, Yukio Hasegawa

Abstract: Magnetic excitations are important quantum phenomena in magnetic systems and have been widely studied in individual magnetic atoms and molecules as well as their assembled structures over the past few decades. Using scanning tunneling microscopy/spectroscopy (STM/S) combined with density functional theory (DFT) and the state-of-the-art ab initio wavefunction calculations, we investigated the prope… ▽ More Magnetic excitations are important quantum phenomena in magnetic systems and have been widely studied in individual magnetic atoms and molecules as well as their assembled structures over the past few decades. Using scanning tunneling microscopy/spectroscopy (STM/S) combined with density functional theory (DFT) and the state-of-the-art ab initio wavefunction calculations, we investigated the properties of a novel dual-core Cr2Br6 molecule, which consists of two Cr ions coupled via superexchange through a single near-90° Cr-Br-Cr scissors bond. Under zero magnetic field, we observed a Fano peak with multi-steps through STS. When an external magnetic field is applied, some steps exhibit additional splitting, while others change little. We find that the Cr2Br6, exhibits a spin-degenerate ground state, and the complex peak splitting arises from the coexistence of vibrational and magnetic excitations in the molecule. Our results reveal rich quantum spin behavior in a well-defined two-core magnetic trihalide complex at the atomic scale, offering not only a minimal model for superexchange-coupled multi-spin quantum excitations but also a possible foundational unit for future molecule-based quantum functionalities. △ Less

Submitted 11 May, 2025; originally announced May 2025.

Comments: 18 pages, 3 figues and 2 tables

Surface mobility of a glass-forming polymer in an ionic liquid

Authors: Xinyu Zhang, Christian Pedersen, Haoqi Zhu, Siming Wang, Yuchen Fu, Liang Dai, Andreas Carlson, Thomas Salez, Yu Chai

Abstract: The free surface of glassy polymers exhibits enhanced segmental dynamics compared to the bulk, forming a liquid-like layer that lowers the glass transition temperature (Tg) in nanometersized polymer samples. Recent studies have shown that immersing polymers in ionic liquids can suppress this enhanced surface dynamics. To investigate how ionic liquids influence polymer dynamics near the ionic-liqui… ▽ More The free surface of glassy polymers exhibits enhanced segmental dynamics compared to the bulk, forming a liquid-like layer that lowers the glass transition temperature (Tg) in nanometersized polymer samples. Recent studies have shown that immersing polymers in ionic liquids can suppress this enhanced surface dynamics. To investigate how ionic liquids influence polymer dynamics near the ionic-liquid-polymer interface, we measure the surface leveling of nanometersized stepped polystyrene films immersed in ionic liquids, and compared the results to the case of films in vacuum. Our results reveal that ionic liquids significantly slow the leveling process both above and below Tg. However, our results indicate that the liquid-like surface layer below Tg does exist in ionic liquids. Numerical solutions of the thin-film equation, incorporating appropriate boundary conditions, show that the surface mobility of PS films in ionic liquids can match that of PS films in vacuum. Thus, while ionic liquids alter the polymer flow process, they do not eliminate the dynamical heterogeneity inherent to glassy polymers. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Synthetic gauge field enabled realization of bulk- and edge-transported states in an aperiodic acoustic structure

Authors: Y. X. Fang, W. H. Zhu, Y. Cai, X. H. Li, M. Q. Zhang, J. Huang, Y. Li, S. Q. Wu

Abstract: Topologically protected edge states with immunity against various disorders have been implemented in a variety of topological insulators. In this Letter, we reveal that Landau levels in aperiodic acoustic structures can be achieved under different pseudomagnetic fields (PMFs). The produced zero order Landau modes (ZOLMs) could transmit along the channels at the interior or exterior of the inhomoge… ▽ More Topologically protected edge states with immunity against various disorders have been implemented in a variety of topological insulators. In this Letter, we reveal that Landau levels in aperiodic acoustic structures can be achieved under different pseudomagnetic fields (PMFs). The produced zero order Landau modes (ZOLMs) could transmit along the channels at the interior or exterior of the inhomogeneous array, which are separately termed as "bulk-transported states" (BTSs) and "edge-transported states" (ETSs). Distinct from conventional valley edge states, the ZOLMs show intriguing self-collimation feature. If a pseudoelectric field (PEF) is further included, the combination of a PMF and PEF can result in the formation of bulk or edge Landau rainbow, where Landau zero modes are distributed at various positions of the bulk or boundary of the sample at different frequencies. The synthetic-gauge-field-controlled topological states can enable fully control of robust transmission, and using the entire footprint of a topological lattice. Our findings not only profoundly advance the current understanding of topological phase matter but also offer new avenues for constructing topological acoustic devices. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Comments: 19 pages, 7 figures

Tunable hinge skin states in a hybrid skin-topological sonic crystal

Authors: Y. X. Fang, W. H. Zhu, Y. P. Lai, Y. Li, S. Q. Wu

Abstract: Higher-order topological states in sound have played a pivotal role in understanding the intricate physics underlying sound transport, giving rise to new strategy of manipulating sound. Here we report tunable structure for hinge skin states in a non-Hermitian acoustic metamaterial with hybrid skin-topological effect. Our finding shows that when on-site gain and loss are exquisitely introduced into… ▽ More Higher-order topological states in sound have played a pivotal role in understanding the intricate physics underlying sound transport, giving rise to new strategy of manipulating sound. Here we report tunable structure for hinge skin states in a non-Hermitian acoustic metamaterial with hybrid skin-topological effect. Our finding shows that when on-site gain and loss are exquisitely introduced into acoustic topological insulators, chiral edge modes in Hermitian counterpart would respectively become amplified or attenuated at zigzag boundaries. If adjacent gain and loss boundaries are intentionally constructed, hinge skin states would take place at their intersections. By strategically combining non-Hermitian and topological physics, we successfully reveal how higher-order hinge modes originate from lower-order surface states and demonstrate flexible acoustic steering in tunable non-Hermitian blocks. Our findings unveil that skin-topological effect may hold significant applications in designing interesting acoustic devices with unconventional functions such as multidimensional acoustic control and accurate energy harvesting. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Comments: 25 pages, 8 figures

Efficient and tunable frequency conversion using periodically poled thin-film lithium tantalate nanowaveguides

Authors: Simin Yu, Mingyue Qi, Huizong Zhu, Bofu Zhao, Jingchun Qian, Qiushi Chen, Juanjuan Lu

Abstract: Thin-film lithium tantalate (TFLT) has recently emerged as a promising photonic platform for chip-scale nonlinear optics due to its weaker photorefraction, higher optical damage threshold, broader transparency window, and lower birefringence compared to that of thin-film lithium niobate. Here we develop an ultralow-loss lithium tantalate integrated photonic platform and report the first functional… ▽ More Thin-film lithium tantalate (TFLT) has recently emerged as a promising photonic platform for chip-scale nonlinear optics due to its weaker photorefraction, higher optical damage threshold, broader transparency window, and lower birefringence compared to that of thin-film lithium niobate. Here we develop an ultralow-loss lithium tantalate integrated photonic platform and report the first functional second harmonic generator based on high-fidelity poling of z-cut TFLT. As a result, quasi-phase matching (QPM) is performed between telecom (1550 nm) and near-visible (775 nm) wavelengths in a straight waveguide and prompts strong second-harmonic generation with a normalized efficiency of 229 %/W/$cm^2$. An absolute conversion efficiency of 5.5 % is achieved with a pump power of 700 mW. Such a second-harmonic generator exhibits stable temperature tunability (-0.44 nm/$^\circ C$) which is important for applications that require precise frequency alignment such as atomic clocks and quantum frequency conversion. △ Less

Submitted 6 May, 2025; originally announced May 2025.

A High-Granularity Proton CT Enhanced by Track Discrimination

Authors: Huang-Chao Shi, Dan-Qi Wang, Mei-Qi Liu, Yi-Dong Yang, Bao-Hua Qi, Yong Liu, Yang-Hui Qin, Chang-Qing Feng, Yi Liu, Hong-Bo Zhu

Abstract: Proton Computed Tomography (pCT) provides a promising solution to enhance the accuracy of Relative Stopping Power (RSP) required for proton therapy planning. This research introduces a novel high-granularity pCT architecture that incorporates a silicon pixel tracking system and a calorimetric range telescope, which uniquely integrates range telescope functionality with track discrimination capabil… ▽ More Proton Computed Tomography (pCT) provides a promising solution to enhance the accuracy of Relative Stopping Power (RSP) required for proton therapy planning. This research introduces a novel high-granularity pCT architecture that incorporates a silicon pixel tracking system and a calorimetric range telescope, which uniquely integrates range telescope functionality with track discrimination capabilities. The Bortfeld function fitting and Convolutional Neural Network (CNN) classifier algorithms are developed and applied for discrimination. In simulation studies, both approaches demonstrate the capability to reduce uncertainty in Water Equivalent Path Length (WEPL) determination for individual proton tracks to below 3~mm. The standard imaging protocol (3.2~mGy, $4\times10^{8}$ protons) achieves sub-millimeter spatial resolution ($\sim$0.5 mm) with sub-1\% RSP accuracy. With proton count requirements reduced by track discrimination, an ultra-low-dose protocol (0.16~mGy, $2\times10^{7}$~protons) is proposed with achieved sub-1\% RSP accuracy and $\sim$1.1~mm spatial resolution in simulation. This low-dose performance significantly expands clinical applicability, particularly for pediatric imaging or frequent imaging scenarios. Furthermore, the target 10 MHz proton detection rate suggests potential for real-time image guidance during radiotherapy. By circumventing the need for ultra-precise energy measurements, this design minimizes hardware complexity and provides a scalable foundation for future pCT systems. △ Less

Submitted 29 April, 2025; originally announced April 2025.

Comments: 11 pages, 8 figures, 3 tables

Embedding Radiomics into Vision Transformers for Multimodal Medical Image Classification

Authors: Zhenyu Yang, Haiming Zhu, Rihui Zhang, Haipeng Zhang, Jianliang Wang, Chunhao Wang, Minbin Chen, Fang-Fang Yin

Abstract: Background: Deep learning has significantly advanced medical image analysis, with Vision Transformers (ViTs) offering a powerful alternative to convolutional models by modeling long-range dependencies through self-attention. However, ViTs are inherently data-intensive and lack domain-specific inductive biases, limiting their applicability in medical imaging. In contrast, radiomics provides interpr… ▽ More Background: Deep learning has significantly advanced medical image analysis, with Vision Transformers (ViTs) offering a powerful alternative to convolutional models by modeling long-range dependencies through self-attention. However, ViTs are inherently data-intensive and lack domain-specific inductive biases, limiting their applicability in medical imaging. In contrast, radiomics provides interpretable, handcrafted descriptors of tissue heterogeneity but suffers from limited scalability and integration into end-to-end learning frameworks. In this work, we propose the Radiomics-Embedded Vision Transformer (RE-ViT) that combines radiomic features with data-driven visual embeddings within a ViT backbone. Purpose: To develop a hybrid RE-ViT framework that integrates radiomics and patch-wise ViT embeddings through early fusion, enhancing robustness and performance in medical image classification. Methods: Following the standard ViT pipeline, images were divided into patches. For each patch, handcrafted radiomic features were extracted and fused with linearly projected pixel embeddings. The fused representations were normalized, positionally encoded, and passed to the ViT encoder. A learnable [CLS] token aggregated patch-level information for classification. We evaluated RE-ViT on three public datasets (including BUSI, ChestXray2017, and Retinal OCT) using accuracy, macro AUC, sensitivity, and specificity. RE-ViT was benchmarked against CNN-based (VGG-16, ResNet) and hybrid (TransMed) models. Results: RE-ViT achieved state-of-the-art results: on BUSI, AUC=0.950+/-0.011; on ChestXray2017, AUC=0.989+/-0.004; on Retinal OCT, AUC=0.986+/-0.001, which outperforms other comparison models. Conclusions: The RE-ViT framework effectively integrates radiomics with ViT architectures, demonstrating improved performance and generalizability across multimodal medical image classification tasks. △ Less

Submitted 22 April, 2025; v1 submitted 15 April, 2025; originally announced April 2025.

Comments: 27 pages, 3 figures

Characteristics of Ge-doped Multi-Mode Fibers in Total Ionizing Dose

Authors: Datao Gong, Suen Hou, Bo-Jing Juang, Bin Lin, Chonghan Liu, Tiankuan Liu, Ming Qi, Yi Yang, Jingbo Ye, Lei Zhang, Li Zhang, HuiPing Zhu

Abstract: Purpose: The fiber optical links in 850 nm band with Ge-doped multi-mode (MM) fibers are well developed for data transmission at 10 Gbps and higher. The applications in nuclear environments require radiation resistance. The characteristics of Ge-doped MM fibers are investigated for Radiation Induced Attenuation (RIA) in Total Ionizing Dose (TID). Methods: Commercial samples of Ge-doped MM fibers… ▽ More Purpose: The fiber optical links in 850 nm band with Ge-doped multi-mode (MM) fibers are well developed for data transmission at 10 Gbps and higher. The applications in nuclear environments require radiation resistance. The characteristics of Ge-doped MM fibers are investigated for Radiation Induced Attenuation (RIA) in Total Ionizing Dose (TID). Methods: Commercial samples of Ge-doped MM fibers were irradiated in Go-60 gamma rays at dose rates of 5 to 1.4k Gy(SiO2)/hr. The fiber samples were packaged in water tanks maintained at constant temperatures in the range of -15 to 45 degC. The optical power transmitted through the fibers were recorded in irradiation, and in annealing when the source was shielded. The measurements of RIA in time are analyzed for dose rate and temperature dependences. Results: Ge-doped fiber samples of OM2 to OM4 grades were investigated for attenuation of optical power in radiation ionizing dose. Depending on the fabrication technology, two of the fiber types show radiation resistance with the RIAs of 0.2 dB/m and 0.05 dB/m, respectively, for the TID of 300 kGy(SiO2). At low dose rate of 5 Gy/hr, the RIA increases steadily and the annealing of low density ionizing defects does not cause notable deviation. At 1.4 kGy/hr the accumulated defects result to twice higher RIA during irradiation, and is worsen to a factor three in cold temperature. However, once the source is shielded the recovery is effective in a few hours. Conclusion: The telecom products of 850 nm Ge-doped MM fibers provide high speed communication in distances of a few hundred meters. The industrial fabrication methods provide fibers that can endure radiation ionizing dose for applications in nuclear instrumentation. △ Less

Submitted 7 April, 2025; originally announced April 2025.

Comments: 9 pages, 13 figures

An Explainable Neural Radiomic Sequence Model with Spatiotemporal Continuity for Quantifying 4DCT-based Pulmonary Ventilation

Authors: Rihui Zhang, Haiming Zhu, Jingtong Zhao, Lei Zhang, Fang-Fang Yin, Chunhao Wang, Zhenyu Yang

Abstract: Accurate evaluation of regional lung ventilation is essential for the management and treatment of lung cancer patients, supporting assessments of pulmonary function, optimization of therapeutic strategies, and monitoring of treatment response. Currently, ventilation scintigraphy using nuclear medicine techniques is widely employed in clinical practice; however, it is often time-consuming, costly,… ▽ More Accurate evaluation of regional lung ventilation is essential for the management and treatment of lung cancer patients, supporting assessments of pulmonary function, optimization of therapeutic strategies, and monitoring of treatment response. Currently, ventilation scintigraphy using nuclear medicine techniques is widely employed in clinical practice; however, it is often time-consuming, costly, and entails additional radiation exposure. In this study, we propose an explainable neural radiomic sequence model to identify regions of compromised pulmonary ventilation based on four-dimensional computed tomography (4DCT). A cohort of 45 lung cancer patients from the VAMPIRE dataset was analyzed. For each patient, lung volumes were segmented from 4DCT, and voxel-wise radiomic features (56-dimensional) were extracted across the respiratory cycle to capture local intensity and texture dynamics, forming temporal radiomic sequences. Ground truth ventilation defects were delineated voxel-wise using Galligas-PET and DTPA-SPECT. To identify compromised regions, we developed a temporal saliency-enhanced explainable long short-term memory (LSTM) network trained on the radiomic sequences. Temporal saliency maps were generated to highlight key features contributing to the model's predictions. The proposed model demonstrated robust performance, achieving average (range) Dice similarity coefficients of 0.78 (0.74-0.79) for 25 PET cases and 0.78 (0.74-0.82) for 20 SPECT cases. The temporal saliency map explained three key radiomic sequences in ventilation quantification: during lung exhalation, compromised pulmonary function region typically exhibits (1) an increasing trend of intensity and (2) a decreasing trend of homogeneity, in contrast to healthy lung tissue. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: 43 pages, 13 figures

Preparing magnonic non-Gaussian states by adding a single magnon onto Gaussian states

Authors: Zi-Xu Lu, Huai-Bing Zhu, Xuan Zuo, Jie Li

Abstract: Quantum magnonics based on YIG spheres provides a new arena for observing macroscopic quantum states. Here we propose to prepare two kinds of non-Gaussian magnonic states by adding a single magnon onto two Gaussian states, namely, coherent and thermal states. We adopt an optomagnonic system of a YIG sphere and use fast optical pulses to weakly activate the magnon-induced Stokes scattering. Conditi… ▽ More Quantum magnonics based on YIG spheres provides a new arena for observing macroscopic quantum states. Here we propose to prepare two kinds of non-Gaussian magnonic states by adding a single magnon onto two Gaussian states, namely, coherent and thermal states. We adopt an optomagnonic system of a YIG sphere and use fast optical pulses to weakly activate the magnon-induced Stokes scattering. Conditioned on the detection of a polarized single photon, a single magnon can be added onto an initial Gaussian state. We use a microwave cavity to prepare an initial magnon coherent state and finally read out the generated single-magnon added coherent or thermal state. Both the non-Gaussian states of a magnon mode in a large-size YIG sphere are macroscopic quantum states, which exhibit many nonclassical properties, such as sub-Poissonian statistics, quadrature squeezing, and a negative Wigner function. Further, both states show a smooth transition from a quantum state to a classical state by changing the coherent or thermal magnon excitations and thus can be used for the fundamental study of the quantum-to-classical transition. △ Less

Submitted 29 May, 2025; v1 submitted 13 March, 2025; originally announced March 2025.

Comments: to appear in PR Research

Journal ref: Phys. Rev. Research 7, 023242 (2025)

Numerical investigation of erosive wear considering surface degradation using coupled CFD-DEM and a bond model

Authors: Vinh D. X. Nguyen, A. Kiet Tieu, Damien Andre, Hongtao Zhu

Abstract: A three-dimensional simulation model is proposed here to study the erosive wear of structure caused by solid particles, which accounts for the accumulation of surface deformation and degradation during the erosion process. Although there are numerous studies on the erosion, they have been primarily based on semi-empirical equations to predict the material loss and lack of an engineering approach t… ▽ More A three-dimensional simulation model is proposed here to study the erosive wear of structure caused by solid particles, which accounts for the accumulation of surface deformation and degradation during the erosion process. Although there are numerous studies on the erosion, they have been primarily based on semi-empirical equations to predict the material loss and lack of an engineering approach to account for the surface evolution during erosion process, which is proved to be of great important. Our proposed model aims to overcome these challenges. In this approach, a conventional volume of solid object is discretized into a number of discrete spherical elements. A bond network is added to connect neighbouring particles at micro-scale, forming a cohesive structure at macro-scale. It is indeed a combination of particulate flow simulation by coupled Computational Fluid Dynamics (CFD) - Discrete Element Method (DEM) and materials modelling by DEM using a bond model. An extensive study of fluid response in both laminar and turbulent flow is conducted when the traditional continuous rigid object is replaced by a corresponding discrete deformable object composed of bonded spherical particles. The replacement of discrete object allows this model to naturally incorporate the three-way interaction of fluid, structure, and particles. The interaction between fluid and structure at macro-scale is implicitly represented by the interaction between fluid and bonded particles at micro-scale, while material properties and the micro-structure of the solid object are reproduced by properties of bond that account for deformation and fracture. Both resolved and unresolved coupling schemes result in good agreement with the traditional CFD approach. △ Less

Submitted 15 February, 2025; originally announced March 2025.

SMILE: a universal tool for modulated-enhanced localization microscopy to achieve minimal three-dimensional resolution

Authors: Hongfei Zhu, Yile Sun, Xinxun Yang, Enxing He, Lu Yin, Hanmeng Wu, Mingxuan Cai, Yubing Han, Renjie Zhou, Cuifang Kuang, Xu Liu

Abstract: Modulation-enhanced localization microscopy (MELM) has demonstrated significant improvements in both lateral and axial localization precision compared to conventional single-molecule localization microscopy (SMLM). However, lateral modulated illumination based MELM (MELMxy) remains fundamentally limited to two-dimensional imaging. Here we present three-dimensional Single-Molecule Modulated Illumin… ▽ More Modulation-enhanced localization microscopy (MELM) has demonstrated significant improvements in both lateral and axial localization precision compared to conventional single-molecule localization microscopy (SMLM). However, lateral modulated illumination based MELM (MELMxy) remains fundamentally limited to two-dimensional imaging. Here we present three-dimensional Single-Molecule Modulated Illumination Localization Estimator (SMILE) that synergistically integrates lateral illumination modulation with point spread function engineering. By simultaneously exploiting lateral modulation patterns and an accurate point spread function (PSF) model for 3D localization, SMILE achieves near-theoretical-minimum localization uncertainty, demonstrating an average 4-fold enhancement in lateral precision compared to conventional 3D-SMLM. Crucially, SMILE exhibits exceptional compatibility with diverse PSFs and different illumination patterns with various structures including 4Pi configurations, making it a versatile tool that can be easily adapted for different experimental setups. When integrated with 4Pi microscopy, 4Pi-SMILE shows particular promise for achieving sub-10 nm axial resolution and approaching isotropic resolution. From the simulations and proof-of-concept experiments, we verified the superiority of SMILE over 3D-SMLM and ordinary MELM. We highlight SMILE as a novel methodology and robust framework that holds great potential to significantly promote the development of MELM. △ Less

Submitted 7 May, 2025; v1 submitted 19 February, 2025; originally announced February 2025.

Application of autoresonance in rapid beam extraction of synchrotrons

Authors: X. Ding, S. Ruan, H. Ren, G. Wang, R. H. Zhu, J. C. Yang, H. Zhao

Abstract: In recent years, ultra-high dose rate (FLASH) radiotherapy has become a novel cancer treatment technique because of its similar tumor-killing efficacy as conventional particle therapy while significantly protecting normal tissues. However, due to the limitation of particle number, achieving FLASH condition in a compact heavy-ion synchrotron requires a short extraction time of tens of milliseconds,… ▽ More In recent years, ultra-high dose rate (FLASH) radiotherapy has become a novel cancer treatment technique because of its similar tumor-killing efficacy as conventional particle therapy while significantly protecting normal tissues. However, due to the limitation of particle number, achieving FLASH condition in a compact heavy-ion synchrotron requires a short extraction time of tens of milliseconds, which is challenging for the conventional RF-KO method. To tackle this challenge, we introduce autoresonance into the third-order resonant extraction for the first time, offering an alternative to the conventional approach of merely increasing the excitation strength. By leveraging a strong detuning effect, a frequency sweeping excitation with small amplitude can drive the entire beam into the autoresonant state, thus enabling rapid beam extraction within a single sweeping period. Compared with the conventional method, this innovative method requires only the addition of an octupole magnet. At the same time, it shows that the conventional RF-KO method has a high autoresonance threshold, so that only a small number of particles that meet the threshold can be excited to large amplitude and be extracted in each sweeping period. In this paper, the autoresonance threshold of a particle in the presence of sextupole and octupole magnetic fields is analyzed, and the single particle simulation shows good agreement with the theoretical formula. Furthermore, the autoresonance based rapid extraction process is simulated and studied, revealing the possibility of millisecond scale beam extraction. △ Less

Submitted 3 March, 2025; v1 submitted 19 February, 2025; originally announced February 2025.

Wafer-scale Integration of Single-Crystalline MoS$_2$ for Flexible Electronics Enabled by Oxide Dry-transfer

Authors: Xiang Xu, Yitong Chen, Jichuang Shen, Qi Huang, Tong Jiang, Han Chen, Huaze Zhu, Yaqing Ma, Hao Wang, Wenhao Li, Chen Ji, Dingwei Li, Siyu Zhang, Yan Wang, Bowen Zhu, Wei Kong

Abstract: Atomically thin, single-crystalline transition metal dichalcogenides (TMDCs) grown via chemical vapor deposition (CVD) on sapphire substrates exhibit exceptional mechanical and electrical properties, positioning them as excellent channel materials for flexible electronics. However, conventional wet-transfer processes for integrating these materials onto flexible substrates often introduce surface… ▽ More Atomically thin, single-crystalline transition metal dichalcogenides (TMDCs) grown via chemical vapor deposition (CVD) on sapphire substrates exhibit exceptional mechanical and electrical properties, positioning them as excellent channel materials for flexible electronics. However, conventional wet-transfer processes for integrating these materials onto flexible substrates often introduce surface contamination, significantly degrading device performance. Here, we present a wafer-scale dry-transfer technique using a high-dielectric oxide as the transfer medium, enabling the integration of 4-inch single-crystalline MoS$_2$ onto flexible substrates. This method eliminates contact with polymers or solvents, thus preserving the intrinsic electronic properties of MoS$_2$. As a result, the fabricated flexible field-effect transistor (FET) arrays exhibit remarkable performance, with a mobility of 117 cm$^2$/Vs, a subthreshold swing of 68.8 mV dec$^{-1}$, and an ultra-high current on/off ratio of $10^{12}$-values comparable to those achieved on rigid substrates. Leveraging the outstanding electrical characteristics, we demonstrated MoS$_2$-based flexible inverters operating in the subthreshold regime, achieving both a high gain of 218 and ultra-low power consumption of 1.4 pW/$μ$m. Additionally, we integrated a flexible tactile sensing system driven by active-matrix MoS$_2$ FET arrays onto a robotic gripper, enabling real-time object identification. These findings demonstrate the simultaneous achievement of high electrical performance and flexibility, highlighting the immense potential of single-crystalline TMDC-based flexible electronics for real-world applications. △ Less

Submitted 23 January, 2025; originally announced January 2025.

Myocardial T1 mapping at 5T using multi-inversion recovery real-time spoiled GRE

Authors: Linqi Ge, Huibin Zhu, Yihang Zhang, Lang Zhang, Yihang Zhou, Haifeng Wang, Dong Liang, Hairong Zheng, Yanjie Zhu

Abstract: Purpose: To develop an accurate myocardial T1 mapping technique at 5T using Look-Locker-based multiple inversion-recovery with the real-time spoiled gradient echo (GRE) acquisition. Methods: The proposed T1 mapping technique (mIR-rt) samples the recovery of inverted magnetization using the real-time GRE and the images captured during diastole are selected for T1 fitting. Multiple-inversion recover… ▽ More Purpose: To develop an accurate myocardial T1 mapping technique at 5T using Look-Locker-based multiple inversion-recovery with the real-time spoiled gradient echo (GRE) acquisition. Methods: The proposed T1 mapping technique (mIR-rt) samples the recovery of inverted magnetization using the real-time GRE and the images captured during diastole are selected for T1 fitting. Multiple-inversion recoveries are employed to increase the sample size for accurate fitting. Furthermore, the inversion pulse (IR) was tailored for cardiac imaging at 5T, optimized to maximize the inversion efficiency over specified ranges of B1 and off-resonance. The T1 mapping method was validated using Bloch simulation, phantom studies, and in 16 healthy volunteers at 5T. Results: The optimized IR pulse based on the tangent/hyperbolic tangent pulse was found to outperform the conventional hyperbolic secant IR pulse within a limited peak amplitude of 10.6 μT at the 5T scanner. This optimized IR pulse achieves an average inversion factor of 0.9014 within a B0 range of +/-250Hz and a B1 range of -50% to 20%. In both simulation and phantom studies, the T1 values measured by mIR-rt closely approximate the reference T1 values, with errors less than 3%, while the conventional MOLLI sequence underestimates T1 values. The myocardial T1 values at 5T are 1553 +/- 52 ms, 1531 +/- 53 ms, and 1526 +/- 60 ms (mean +/- standard deviation) at the apex, middle, and base, respectively. Conclusion: The proposed method is feasible for myocardial T1 mapping at 5T and provides better accuracy than the conventional MOLLI sequence. Keywords: Myocardial T1 mapping, 5T, Look-Locker △ Less

Submitted 11 March, 2025; v1 submitted 13 January, 2025; originally announced January 2025.

Anomalous Ultrafast Thermalization of Photoexcited Carriers in Two-Dimensional Materials Induced by Orbital Coupling

Authors: Zhuoqun Wen, Haiyu Zhu, Wenhao Liu, Zhi Wang, Wen Xiong, Xingzhan Wei

Abstract: Understanding the dynamics of photoexcited carriers is essential for advancing photoelectronic device design. Photon absorption generates electron-hole pairs, and subsequent scatterings can induce ultrafast thermalization within a picosecond, forming a quasi-equilibrium distribution with overheated electrons. The high-energy tail of this distribution enables carriers to overcome energy barriers, t… ▽ More Understanding the dynamics of photoexcited carriers is essential for advancing photoelectronic device design. Photon absorption generates electron-hole pairs, and subsequent scatterings can induce ultrafast thermalization within a picosecond, forming a quasi-equilibrium distribution with overheated electrons. The high-energy tail of this distribution enables carriers to overcome energy barriers, thereby enhancing quantum efficiency--a phenomenon known as photo-thermionic emission (PTE). Despite its importance, the onset and mechanisms of PTE remain under debate. Using real-time time-dependent density functional theory (rt-TDDFT), we investigate ultrafast carrier thermalization in two-dimensional materials graphene and PtTe2, and the results reveal distinct differences. In graphene, both electrons and holes thermalize into Fermi-Dirac distributions with good agreement to experiment, while PtTe2 exhibits anomalous high-energy tails for both electrons and holes, deviating significantly from Fermi-Dirac behavior. We attribute this anomaly to differences in orbital coupling between the two materials, from which we derive design principles for identifying optimal PTE candidates and, ultimately, improving photodetector performance. △ Less

Submitted 10 January, 2025; originally announced January 2025.

Comments: 12 pages, 5 figures, 1 table

On-chip Brillouin Amplifier in Suspended Lithium Niobate Nanowaveguides

Authors: Simin Yu, Ruixin Zhou, Guangcanlan Yang, Qiang Zhang, Huizong Zhu, Yuanhao Yang, Xin-Biao Xu, Baile Chen, Chang-Ling Zou, Juanjuan Lu

Abstract: Thin film lithium niobate (TFLN) has emerged as a leading material platform for integrated nonlinear photonics, enabling transformative applications such as broadband Kerr soliton microcomb and high-speed electro-optic modulation. While stimulated Brillouin scattering has been numerically proposed in TFLN, achieving sufficient gain remains challenging due to the requirement for the simultaneous lo… ▽ More Thin film lithium niobate (TFLN) has emerged as a leading material platform for integrated nonlinear photonics, enabling transformative applications such as broadband Kerr soliton microcomb and high-speed electro-optic modulation. While stimulated Brillouin scattering has been numerically proposed in TFLN, achieving sufficient gain remains challenging due to the requirement for the simultaneous low optical and mechanical losses of the device. In this work, we systematically characterize the angle-dependence of Brillouin gain coefficients in x-cut membrane-suspended TFLN nanowaveguides, taking into account the anisotropy of the photoelastic coefficients in lithium niobate. We report a Brillouin gain coefficient of 129.5 m$^{-1}$W$^{-1}$ and further demonstrate the Brillouin frequency tuning through variations in either pump frequency or chip operating temperature. Based on the suspended TFLN nanowaveguide, by optimizing the confinement of both photonic and phononic modes, we have achieved a Brillouin amplifier with a record-high gain of 8.5 dB. This result not only validates the feasibility of strong guided Brillouin interaction using suspended TFLN nanowaveguides, but also paves the way for novel on-chip sensing and signal processing applications. △ Less

Submitted 16 December, 2024; originally announced December 2024.

Comments: 6 pages, 4 figures

High-Quality Passive Acoustic Mapping with the Cross-Correlated Angular Spectrum Method

Authors: Yi Zeng, Hui Zhu, Jinwei Li, Jianfeng Li, Fei Li, Shukuan Lu, Xiran Cai

Abstract: While passive acoustic mapping (PAM) has been advanced for monitoring acoustic cavitation activity in focused ultrasound (FUS) therapy, achieving both real-time and high-quality imaging capabilities is still challenging. The angular spectrum (AS) method presents the most efficient algorithm for PAM, but it suffers from artifacts and low resolution due to the diffraction pattern of the imaging arra… ▽ More While passive acoustic mapping (PAM) has been advanced for monitoring acoustic cavitation activity in focused ultrasound (FUS) therapy, achieving both real-time and high-quality imaging capabilities is still challenging. The angular spectrum (AS) method presents the most efficient algorithm for PAM, but it suffers from artifacts and low resolution due to the diffraction pattern of the imaging array. Data-adaptive beamformers suppress artifacts well, but their overwhelming computational complexity, more than two orders of magnitude higher than the classical time exposure acoustic (TEA) method, hinders their application in real-time. In this work, we introduce the cross-correlated AS method to address the challenge. This method is based on cross-correlating the AS back-propagated wave fields, in the frequency domain, measured by different apodized sub-apertures of the transducer array to provide the normalized correlation coefficient (NCC) matrix for artifacts suppression. We observed that the spatial pattern of NCC matrix is variable which can be utilized by the triple apodization with cross-correlation (TAX) with AS scheme, namely the AS-TAX method, for optimal artifacts suppression outcomes. Both the phantom and mouse tumor experiments showed that: 1) the AS-TAX method has comparable image quality as the data-adaptive beamformers, reducing the energy spread area by 34.8-66.6% and improving image signal-to-noise ratio by 10.7-14.5 dB compared to TEA; 2) it reduces the computational complexity by two orders of magnitude compared to TEA allowing millisecond-level image reconstruction speed with a parallel implementation; 3) it can well map microbubble cavitation activity of different status (stable or inertial). The AS-TAX method represents a real-time approach to monitor cavitation-based FUS therapy with high image quality. △ Less

Submitted 3 December, 2024; originally announced December 2024.

Lab and Beam Tests of a SiPM-readout ASIC with a Large Dynamic Range

Authors: Baohua Qi, Yong Liu, Huangchao Shi, Danqi Wang, Zhiyu Zhao, Hongbo Zhu

Abstract: A front-end readout system with a large dynamic range is required for the high-granularity crystal electromagnetic calorimeter (ECAL) at future Higgs factories. A new commercially available ASIC, MPT2321, which offers a significantly large dynamic range for the readout of the silicon photomultiplier (SiPM), has been tested in the laboratory and at a test beam facility. The fundamental performance… ▽ More A front-end readout system with a large dynamic range is required for the high-granularity crystal electromagnetic calorimeter (ECAL) at future Higgs factories. A new commercially available ASIC, MPT2321, which offers a significantly large dynamic range for the readout of the silicon photomultiplier (SiPM), has been tested in the laboratory and at a test beam facility. The fundamental performance metrics have been characterised, including response linearity, inter-calibration factor and noise performance. To quantitatively assess the dynamic range of the chip and evaluate its feasibility for SiPM readout in high-granularity crystal ECAL, a beamtest was conducted using scintillating crystals exposed to electron beams. Beamtest results showed that the chip exhibits a promising performance in terms of a good signal-to-noise ratio and a relatively large dynamic range. △ Less

Submitted 22 May, 2025; v1 submitted 28 November, 2024; originally announced November 2024.

Effects of Muscle Synergy during Overhead Work with a Passive Shoulder Exoskeleton: A Case Study

Authors: Jin Tian, Baichun Wei, Chifu Yang, Suo Luo, Jiadong Feng, Ping Li, Changbing Chen, Yingjie Liu, Haiqi Zhu, Chunzhi Yi

Abstract: Objective: Shoulder exoskeletons can effectively assist with overhead work. However, their impacts on muscle synergy remain unclear. The objective is to systematically investigate the effects of the shoulder exoskeleton on muscle synergies during overhead work.Methods: Eight male participants were recruited to perform a screwing task both with (Intervention) and without (Normal) the exoskeleton. E… ▽ More Objective: Shoulder exoskeletons can effectively assist with overhead work. However, their impacts on muscle synergy remain unclear. The objective is to systematically investigate the effects of the shoulder exoskeleton on muscle synergies during overhead work.Methods: Eight male participants were recruited to perform a screwing task both with (Intervention) and without (Normal) the exoskeleton. Eight muscles were monitored and muscle synergies were extracted using non-negative matrix factorization and electromyographic topographic maps. Results: The number of synergies extracted was the same (n = 2) in both conditions. Specifically, the first synergies in both conditions were identical, with the highest weight of AD and MD; while the second synergies were different between conditions, with highest weight of PM and MD, respectively. As for the first synergy in the Intervention condition, the activation profile significantly decreased, and the average recruitment level and activation duration were significantly lower (p<0.05). The regression analysis for the muscle synergies across conditions shows the changes of muscle synergies did not influence the sparseness of muscle synergies (p=0.7341). In the topographic maps, the mean value exhibited a significant decrease (p<0.001) and the entropy significantly increased (p<0.01). Conclusion: The exoskeleton does not alter the number of synergies and existing major synergies but may induce new synergies. It can also significantly decrease neural activation and may influence the heterogeneity of the distribution of monitored muscle activations. Significance: This study provides insights into the potential mechanisms of exoskeleton-assisted overhead work and guidance on improving the performance of exoskeletons. △ Less

Submitted 23 November, 2024; originally announced November 2024.

PACE: Pacing Operator Learning to Accurate Optical Field Simulation for Complicated Photonic Devices

Authors: Hanqing Zhu, Wenyan Cong, Guojin Chen, Shupeng Ning, Ray T. Chen, Jiaqi Gu, David Z. Pan

Abstract: Electromagnetic field simulation is central to designing, optimizing, and validating photonic devices and circuits. However, costly computation associated with numerical simulation poses a significant bottleneck, hindering scalability and turnaround time in the photonic circuit design process. Neural operators offer a promising alternative, but existing SOTA approaches, NeurOLight, struggle with p… ▽ More Electromagnetic field simulation is central to designing, optimizing, and validating photonic devices and circuits. However, costly computation associated with numerical simulation poses a significant bottleneck, hindering scalability and turnaround time in the photonic circuit design process. Neural operators offer a promising alternative, but existing SOTA approaches, NeurOLight, struggle with predicting high-fidelity fields for real-world complicated photonic devices, with the best reported 0.38 normalized mean absolute error in NeurOLight. The inter-plays of highly complex light-matter interaction, e.g., scattering and resonance, sensitivity to local structure details, non-uniform learning complexity for full-domain simulation, and rich frequency information, contribute to the failure of existing neural PDE solvers. In this work, we boost the prediction fidelity to an unprecedented level for simulating complex photonic devices with a novel operator design driven by the above challenges. We propose a novel cross-axis factorized PACE operator with a strong long-distance modeling capacity to connect the full-domain complex field pattern with local device structures. Inspired by human learning, we further divide and conquer the simulation task for extremely hard cases into two progressively easy tasks, with a first-stage model learning an initial solution refined by a second model. On various complicated photonic device benchmarks, we demonstrate one sole PACE model is capable of achieving 73% lower error with 50% fewer parameters compared with various recent ML for PDE solvers. The two-stage setup further advances high-fidelity simulation for even more intricate cases. In terms of runtime, PACE demonstrates 154-577x and 11.8-12x simulation speedup over numerical solver using scipy or highly-optimized pardiso solver, respectively. We open sourced the code and dataset. △ Less

Submitted 5 November, 2024; originally announced November 2024.

Comments: Accepeted by Neurips 2024, 21 pages

Three-dimensional Coupled PT-symmetric Electronic Resonators

Authors: Ke Yin, Kaihao Tang, Lu Tan, Saddam Ibrahim Dawalbait Bakhat, Tianyu Dong, Huacheng Zhu, Yang Yang

Abstract: In this article, the non-Hermitian characteristics of three-dimensional PT-symmetric coupled electronic resonators are theoretically analyzed. First, the concept of non-Hermitian PT symmetry is illustrated in the context of electronics using a pair of coupled electronic resonators. Two typical configurations of parallel-coupled PT-symmetric electronic trimers are then analyzed. The results indicat… ▽ More In this article, the non-Hermitian characteristics of three-dimensional PT-symmetric coupled electronic resonators are theoretically analyzed. First, the concept of non-Hermitian PT symmetry is illustrated in the context of electronics using a pair of coupled electronic resonators. Two typical configurations of parallel-coupled PT-symmetric electronic trimers are then analyzed. The results indicate that, for the planar configuration, the system can exhibit two phase transitions as the coupling coefficient or gain-loss parameter changes, different from the linear configuration. By comparing system equations based on coupled-mode theory and circuit theory, it is shown that high dimensionality alone is not a sufficient condition for the existence of a higher-order exceptional point; an approximation condition is also required. A modified exceptional point is proposed, and the approximation conditions for the mean deviation $D$ for the real part of the three eigenfrequencies, satisfying $D \leq 1\%$ and $D \leq 0.1\%$, are discussed, respectively. The theoretical results presented in this paper not only reveal the unique non-Hermitian characteristics of high-dimensional PT-symmetric electronic systems but also offer theoretical support for wireless power transmission and wireless sensing technologies. △ Less

Submitted 1 November, 2024; originally announced November 2024.

Multidimensional Deconvolution with Profiling

Authors: Huanbiao Zhu, Krish Desai, Mikael Kuusela, Vinicius Mikuni, Benjamin Nachman, Larry Wasserman

Abstract: In many experimental contexts, it is necessary to statistically remove the impact of instrumental effects in order to physically interpret measurements. This task has been extensively studied in particle physics, where the deconvolution task is called unfolding. A number of recent methods have shown how to perform high-dimensional, unbinned unfolding using machine learning. However, one of the ass… ▽ More In many experimental contexts, it is necessary to statistically remove the impact of instrumental effects in order to physically interpret measurements. This task has been extensively studied in particle physics, where the deconvolution task is called unfolding. A number of recent methods have shown how to perform high-dimensional, unbinned unfolding using machine learning. However, one of the assumptions in all of these methods is that the detector response is correctly modeled in the Monte Carlo simulation. In practice, the detector response depends on a number of nuisance parameters that can be constrained with data. We propose a new algorithm called Profile OmniFold, which works in a similar iterative manner as the OmniFold algorithm while being able to simultaneously profile the nuisance parameters. We illustrate the method with a Gaussian example as a proof of concept highlighting its promising capabilities. △ Less

Submitted 14 December, 2024; v1 submitted 16 September, 2024; originally announced September 2024.

Thermoelectrical potential and derivation of Kelvin relation for thermoelectric materials

Authors: Sikun Chen, Hongxin Zhu, Haidong Wang, Zengyuan Guo

Abstract: Current research on thermoelectricity is primarily focused on the exploration of materials with enhanced performance, resulting in a lack of fundamental understanding of the thermoelectric effect. Such circumstance is not conducive to the further improvement of the efficiency of thermoelectric conversion. Moreover, available physical images of the derivation of the Kelvin relations are ambiguous.… ▽ More Current research on thermoelectricity is primarily focused on the exploration of materials with enhanced performance, resulting in a lack of fundamental understanding of the thermoelectric effect. Such circumstance is not conducive to the further improvement of the efficiency of thermoelectric conversion. Moreover, available physical images of the derivation of the Kelvin relations are ambiguous. Derivation processes are complex and need a deeper understanding of thermoelectric conversion phenomena. In this paper, a new physical quantity 'thermoelectrical potential' from the physical nature of the thermoelectric conversion is proposed. The quantity is expressed as the product of the Seebeck coefficient and the absolute temperature, i.e., ST. Based on the thermoelectrical potential, we clarify the conversion of the various forms of energy in the thermoelectric effect by presenting a clear physical picture. Results from the analysis of the physical mechanism of the Seebeck effect indicate that the thermoelectrical potential, rather than the temperature gradient field, exerts a force on the charge carriers in the thermoelectric material. Based on thermoelectric potential, the Peltier effects at different material interfaces can be macroscopically described. The Kelvin relation is rederived using the proposed quantity, which simplified the derivation process and elucidated the physical picture of the thermoelectrical conversion. △ Less

Submitted 13 September, 2024; originally announced September 2024.

Optical Routing via High Efficiency Composite Acoustic Diffraction

Authors: Yuxiang Zhao, Jiangyong Hu, Ruijuan Liu, Ruochen Gao, Yiming Li, Xiao Zhang, Huanfeng Zhu, Saijun Wu

Abstract: Acousto-optical modulation (AOM) is a powerful and widely used technique for rapidly controlling the frequency, phase, intensity, and direction of light. Based on Bragg diffraction, AOMs typically exhibit moderate diffraction efficiency, often less than 90\% even for collimated inputs. In this work, we demonstrate that this efficiency can be significantly improved using a composite (CP) setup comp… ▽ More Acousto-optical modulation (AOM) is a powerful and widely used technique for rapidly controlling the frequency, phase, intensity, and direction of light. Based on Bragg diffraction, AOMs typically exhibit moderate diffraction efficiency, often less than 90\% even for collimated inputs. In this work, we demonstrate that this efficiency can be significantly improved using a composite (CP) setup comprising a pair of 4-F-linked AOMs, enabling beamsplitting with fully tunable splitting amplitude and phase. The efficiency enhancement arises from two effects, termed "momentum echo" and "high-order rephasing," which can be simultaneously optimized by adjusting the relative distance between the two AOMs. This method is resource-efficient, does not require ultra-collimation, and maintains control bandwidth. Experimentally, we achieved a diffraction efficiency exceeding 99\% (excluding insertion loss) and a 35 dB single-mode suppression of the 0th-order beam, demonstrating a full-contrast optical router with a switching time of less than 100~nanoseconds. Theoretically, we formulate the dynamics of CP-AOM in terms of multi-mode quantum control and discuss extensions beyond the $N=2$ configuration presented in this work. The substantially enhanced performance of CP-AOMs, coupled with reduced acoustic amplitude requirements, may significantly advance our ability to accurately control light at high speeds with low-loss acousto-optics. △ Less

Submitted 30 December, 2024; v1 submitted 27 August, 2024; originally announced August 2024.

Comments: Minor revision with improved clarity. 12 pages, 5 figures

Microwave-optics entanglement via coupled opto- and magnomechanical microspheres

Authors: Hao-Tian Li, Zhi-Yuan Fan, Huai-Bing Zhu, Simon Gröblacher, Jie Li

Abstract: Microwave-optics entanglement plays a crucial role in building hybrid quantum networks with quantum nodes working in the microwave and optical frequency bands. However, there are limited efficient ways to produce such entanglement due to the large frequency mismatch between the two regimes. Here, we present a new mechanism to prepare microwave-optics entanglement based on a hybrid system of two co… ▽ More Microwave-optics entanglement plays a crucial role in building hybrid quantum networks with quantum nodes working in the microwave and optical frequency bands. However, there are limited efficient ways to produce such entanglement due to the large frequency mismatch between the two regimes. Here, we present a new mechanism to prepare microwave-optics entanglement based on a hybrid system of two coupled opto- and magnomechanical microspheres, i.e., a YIG sphere and a silica sphere. The YIG sphere holds a magnon mode and a vibration mode induced by magnetostriction, while the silica sphere supports an optical whispering-gallery mode and a mechanical mode coupled via an optomechanical interaction. The two mechanical modes are close in frequency and directly coupled via physical contact of the two microspheres. We show that by simultaneously activating the magnomechanical (optomechanical) Stokes (anti-Stokes) scattering, stationary entanglement can be established between the magnon and optical modes via mechanics-mechanics coupling. This leads to stationary microwave-optics entanglement by further coupling the YIG sphere to a microwave cavity and utilizing the magnon-microwave state swapping. Our protocol is within reach of current technology and may become a promising new approach for preparing microwave-optics entanglement, which finds unique applications in hybrid quantum networks and quantum information processing with hybrid quantum systems. △ Less

Submitted 16 December, 2024; v1 submitted 7 August, 2024; originally announced August 2024.

Comments: accepted to Laser Photonics Reviews

Journal ref: Laser Photonics Rev. 19, 2401348 (2025)

Collisionless zonal-flow dynamics in quasisymmetric stellarators

Authors: Hongxuan Zhu, Z. Lin, A. Bhattacharjee

Abstract: The linear collisionless plasma response to a zonal-density perturbation in quasisymmetric stellarators is studied, including the geodesic-acoustic-mode oscillations and the Rosenbluth--Hinton residual flow. While the geodesic-acoustic-mode oscillations in quasiaxisymmetric configurations are similar to tokamaks, they become non-existent in quasi-helically symmetric configurations when the effecti… ▽ More The linear collisionless plasma response to a zonal-density perturbation in quasisymmetric stellarators is studied, including the geodesic-acoustic-mode oscillations and the Rosenbluth--Hinton residual flow. While the geodesic-acoustic-mode oscillations in quasiaxisymmetric configurations are similar to tokamaks, they become non-existent in quasi-helically symmetric configurations when the effective safety factor in helical-angle coordinates is small. Compared with concentric circular tokamaks, the Rosenbluth--Hinton residual is also found to be multiplied by a geometric factor $\mathcal{C}$ that arises from the flux-surface averaged classical polarization. Using the near-axis-expansion framework, we derive an analytic expression for $\mathcal{C}$, which varies significantly among different configurations. These analytic results are compared with numerical simulation results from the global gyrokinetic particle-in-cell code GTC, and good agreement with the theoretical Rosenbluth--Hinton residual level is achieved only when the quasisymmetry error is small enough. Since zonal flows can be important for regulating turbulent transport, these results suggest a possible relation between the transport level and the stellarator geometric parameters via nonlinear interactions with zonal flows. △ Less

Submitted 15 December, 2024; v1 submitted 28 July, 2024; originally announced July 2024.

Journal ref: J. Plasma Phys. 91 (2025) E28

Harmonizing Material Quantity and Terahertz Wave Interference Shielding Efficiency with Metallic Borophene Nanosheets

Authors: Haojian Lin, Ximiao Wang, Zhaolong Cao, Hongjia Zhu, Jiahao Wu, Runze Zhan, Ningsheng Xu, Shaozhi Deng, Huanjun Chen, Fei Liu

Abstract: Materials with electromagnetic interference (EMI) shielding in the terahertz (THz) regime, while minimizing the quantity used, are highly demanded for future information communication, healthcare and mineral resource exploration applications. Currently, there is often a trade-off between the amount of material used and the absolute EMI shielding effectiveness (EESt) for the EMI shielding materials… ▽ More Materials with electromagnetic interference (EMI) shielding in the terahertz (THz) regime, while minimizing the quantity used, are highly demanded for future information communication, healthcare and mineral resource exploration applications. Currently, there is often a trade-off between the amount of material used and the absolute EMI shielding effectiveness (EESt) for the EMI shielding materials. Here, we address this trade-off by harnessing the unique properties of two-dimensional (2D) beta12-borophene (beta12-Br) nanosheets. Leveraging beta12-Br's light weight and exceptional electron mobility characteristics, which represent among the highest reported values to date, we simultaneously achieve a THz EMI shield effectiveness (SE) of 70 dB and an EESt of 4.8E5 dB cm^2/g (@0.87 THz) using a beta12-Br polymer composite. This surpasses the values of previously reported THz shielding materials with an EESt less than 3E5 dB cm^2/g and a SE smaller than 60 dB, while only needs 0.1 wt.% of these materials to realize the same SE value. Furthermore, by capitalizing on the composite's superior mechanical properties, with 158% tensile strain at a Young's modulus of 33 MPa, we demonstrate the high-efficiency shielding performances of conformably coated surfaces based on beta12-Br nanosheets, suggesting their great potential in EMI shielding area. △ Less

Submitted 21 July, 2024; originally announced July 2024.

Design, fabrication and testing of Al/p-Si Schottky and pn junctions for radiation studies

Authors: E. Giulio Villani, Dengfeng Zhang, Adnan Malik, Trevor Vickey, Yebo Chen, Matthew G. Kurth, Peilian Liu, Hongbo Zhu, Thomas Koffas, Christoph Thomas Klein, Robert Vandusen, Rodney Aiton, Angela Mccormick, Garry Tarr

Abstract: Strip and pixels sensors, fabricated on high resistivity silicon substrate, normally of p-type, are used in detectors for High Energy Physics (HEP) typically in a hybrid detector assembly. Furthermore, and owing to their inherent advantages over hybrid sensors, Monolithic Active Pixel Sensors (MAPS) fabricated in CMOS technology have been increasingly implemented in HEP experiments. In all cases,… ▽ More Strip and pixels sensors, fabricated on high resistivity silicon substrate, normally of p-type, are used in detectors for High Energy Physics (HEP) typically in a hybrid detector assembly. Furthermore, and owing to their inherent advantages over hybrid sensors, Monolithic Active Pixel Sensors (MAPS) fabricated in CMOS technology have been increasingly implemented in HEP experiments. In all cases, their use in higher radiation areas (HL-LHC and beyond) will require options to improve their radiation hardness and time resolution. These aspects demand a deep understanding of their radiation damage and reliable models to predict their behaviours at high fluences. As a first step, we fabricated several Schottky and n-on-p diodes, to allow a comparison of results and provide a backup solution for test devices, on 6 or 4-inch p-type silicon wafers with 50 μm epitaxial thickness and of doping concentration as they are normally used in HEP detectors and CMOS MAPS devices. In this paper, details of the design and fabrication process, along with test results of the fabricated devices before irradiation, will be provided. Additional test results on irradiated devices will be provided in subsequent publications. △ Less

Submitted 26 June, 2024; originally announced July 2024.

Magnon squeezing via reservoir-engineered optomagnomechanics

Authors: Zhi-Yuan Fan, Huai-Bing Zhu, Hao-Tian Li, Jie Li

Abstract: We show how to prepare magnonic squeezed states in an optomagnomechanical system, in which magnetostriction induced mechanical displacement couples to an optical cavity via radiation pressure. We discuss two scenarios depending on whether the magnomechanical coupling is linear or dispersive. We show that in both cases the strong mechanical squeezing obtained via two-tone driving of the optical cav… ▽ More We show how to prepare magnonic squeezed states in an optomagnomechanical system, in which magnetostriction induced mechanical displacement couples to an optical cavity via radiation pressure. We discuss two scenarios depending on whether the magnomechanical coupling is linear or dispersive. We show that in both cases the strong mechanical squeezing obtained via two-tone driving of the optical cavity can be efficiently transferred to the magnon mode. In the linear coupling case, stationary magnon squeezing is achieved; while in the dispersive coupling case, a transient magnonic squeezed state is prepared in a two-step protocol. The proposed magnonic squeezed states find promising applications in quantum information processing and quantum sensing using magnons. △ Less

Submitted 9 October, 2024; v1 submitted 11 July, 2024; originally announced July 2024.

Comments: Special Topic on "Brillouin Scattering and Optomechanics" in APL Photonics

Journal ref: APL Photonics 9, 100804 (2024)

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Giant Second Harmonic Generation from Wafer-Scale Aligned Chiral Carbon Nanotubes

Authors: Rui Xu, Jacques Doumani, Viktor Labuntsov, Nina Hong, Anna-Christina Samaha, Weiran Tu, Fuyang Tay, Elizabeth Blackert, Jiaming Luo, Mario El Tahchi, Weilu Gao, Jun Lou, Yohei Yomogida, Kazuhiro Yanagi, Riichiro Saito, Vasili Perebeinos, Andrey Baydin, Junichiro Kono, Hanyu Zhu

Abstract: Chiral carbon nanotubes (CNTs) are direct-gap semiconductors with optical properties governed by one-dimensional excitons with enormous oscillator strengths. Each species of chiral CNTs has an enantiomeric pair of left- and right-handed CNTs with nearly identical properties, but enantiomer-dependent phenomena can emerge, especially in nonlinear optical processes. Theoretical studies have predicted… ▽ More Chiral carbon nanotubes (CNTs) are direct-gap semiconductors with optical properties governed by one-dimensional excitons with enormous oscillator strengths. Each species of chiral CNTs has an enantiomeric pair of left- and right-handed CNTs with nearly identical properties, but enantiomer-dependent phenomena can emerge, especially in nonlinear optical processes. Theoretical studies have predicted strong second-order nonlinearities for chiral CNTs, but there has been no experimental verification due to the lack of macroscopically ordered assemblies of single-enantiomer chiral CNTs. Here for the first time, we report the synthesis of centimeter-scale films of densely packed and aligned single-enantiomer chiral CNTs that exhibit micro-fabrication compatibility. We observe giant second harmonic generation (SHG) emission from the chiral CNT film, which originates from the intrinsic chirality and inversion symmetry breaking of the atomic structure of chiral CNTs. The observed value of the dominant element of the second-order nonlinear optical susceptibility tensor reaches $1.5\times 10^{3}$ pm/V at a pump wavelength of 1030 nm, corresponding to the lowest-energy excitonic resonance. Our calculations based on many-body theory correctly estimate the spectrum and magnitude of such excitonically enhanced optical nonlinearity. These results are promising for developing scalable chiral-CNT electronics, nonlinear photonics and photonic quantum computing. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Monolithic Multi-parameter Terahertz Nano-micro Detector Based on Plasmon Polariton Atomic Cavity

Authors: Huanjun Chen, Ximiao Wang, Shaojing Liu, Zhaolong Cao, Jinyang Li, Hongjia Zhu, Shangdong Li, Ningsheng Xu, Shaozhi Deng

Abstract: Terahertz signals hold significant potential for ultra-wideband communication and high-resolution radar, necessitating miniaturized detectors capable of multi-parameter detection of intensity, frequency, polarization, and phase. Conventional detectors cannot meet these requirements. Here, we propose plasmon polariton atomic cavities (PPAC) made from single-atom-thick graphene, demonstrating the mo… ▽ More Terahertz signals hold significant potential for ultra-wideband communication and high-resolution radar, necessitating miniaturized detectors capable of multi-parameter detection of intensity, frequency, polarization, and phase. Conventional detectors cannot meet these requirements. Here, we propose plasmon polariton atomic cavities (PPAC) made from single-atom-thick graphene, demonstrating the monolithic multifunctional miniaturized detector. With a footprint one-tenth the incident wavelength, the detector offers benchmarking intensity-, frequency-, and polarization-sensitive detection, rapid response, and sub-diffraction spatial resolution, all operating at room temperature across 0.22 to 4.24 THz. We present the monolithic detection applications for free-space THz polarization-coded communication and stealth imaging of physical properties. These results showcase the PPAC's unique ability to achieve strong absorption and weak signal detection with a thickness of only 10^-5 of the excitation wavelength, which is inaccessible with other approaches. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

Polarization-Controlled Chiral Transport

Authors: Hang Zhu, Jian Wang, Andrea Alu, Lin Chen

Abstract: Handedness-selective chiral transport is an intriguing phenomenon that not only holds significant importance for fundamental research, but it also carries application prospects in fields such as optical communications and sensing. Currently, on-chip chiral transport devices are static, unable to modulate the output modes based on the input modes. This limits both device functionality reconfigurati… ▽ More Handedness-selective chiral transport is an intriguing phenomenon that not only holds significant importance for fundamental research, but it also carries application prospects in fields such as optical communications and sensing. Currently, on-chip chiral transport devices are static, unable to modulate the output modes based on the input modes. This limits both device functionality reconfiguration and information transmission capacity. Here, we propose to use the incident polarization diversity to control the Hamiltonian evolution path, achieving polarization-dependent chiral transport. By mapping the evolution path of TE and TM polarizations onto elaborately engineered double-coupled waveguides, we experimentally demonstrate that different polarizations yield controllable modal outputs. This work combines Multiple-Input Multiple-Output and polarization diversity concepts with chiral transport, and challenges the prevailing notion that the modal outputs are fixed to specific modes in chiral transport, thereby opening pathways for the development of on-chip reconfigurable and high-capacity handedness-selective devices. △ Less

Submitted 4 July, 2024; v1 submitted 16 May, 2024; originally announced May 2024.

Effect of a fixed downstream cylinder on the flow-induced vibration of an elastically-supported primary cylinder

Authors: Junlei Wang, Shenfang Li, Daniil Yurchenko, Hongjun Zhu, Chandan Bose

Abstract: This paper numerically investigates the influence of a fixed downstream control cylinder on the flow-induced vibration of an elastically-supported primary cylinder. These two cylinders are situated in a tandem arrangement with small dimensionless centre-to-centre spacing ($L/D$, $L$ is the intermediate spacing, and $D$ is the cylinder diameter). The present two-dimensional (2D) simulations are car… ▽ More This paper numerically investigates the influence of a fixed downstream control cylinder on the flow-induced vibration of an elastically-supported primary cylinder. These two cylinders are situated in a tandem arrangement with small dimensionless centre-to-centre spacing ($L/D$, $L$ is the intermediate spacing, and $D$ is the cylinder diameter). The present two-dimensional (2D) simulations are carried out in the low Reynolds number ($Re$) regime. The primary focus of this study is to reveal the underlying flow physics behind the transition from vortex-induced vibration to galloping in the response of the primary cylinder due to the presence of another fixed downstream cylinder. Two distinct flow field regimes, namely steady flow and alternate attachment regimes, are observed for different $L/D$ and Re values. Depending on the evolution of the near-field flow structures, four different wake patterns - `2S', `2P', `2C', and `aperiodic' - are observed. The corresponding vibration response of the upstream cylinder is characterized as interference galloping and extended vortex-induced vibration. As the $L/D$ ratio increases, the lift enhancement due to flow-induced vibration is seen to be weakened. The detailed correlation between the force generation and the near-wake interactions is investigated. The present findings will augment the understanding of vibration reduction or flow-induced energy harvesting of tandem cylindrical structures. △ Less

Submitted 14 May, 2024; originally announced May 2024.

Room temperature Si:S barrier infrared detector with broadband response up to 4.4μm

Authors: He Zhu, Yunlong Xiao, Zhongyang Yu, Jiaqi Zhu, Qing Li, Zhenyu Ye, Xi Wang, Changlong Liu, Changyu Pan, Yufeng Shan, Junli Duan, Huizhen Wu, Weida Hu, Ning Dai

Abstract: Mid-infrared spectrum is a critical tool for chemical analysis, industrial inspection, environment, and other fields due to its rich chemical bond information. However, the complicated growth or fabrication procedures of existing mid-infrared sensitive materials hinder the large-scale production and utilization of mid-infrared detectors. To address this issue, we developed Si:S barrier detectors e… ▽ More Mid-infrared spectrum is a critical tool for chemical analysis, industrial inspection, environment, and other fields due to its rich chemical bond information. However, the complicated growth or fabrication procedures of existing mid-infrared sensitive materials hinder the large-scale production and utilization of mid-infrared detectors. To address this issue, we developed Si:S barrier detectors employing sulfur doped silicon and a sophisticated band barrier design. Since the transport of dark current and photo current is separated, the barrier design effectively suppresses the dark current while allowing the photo current to leverage gain mechanisms, thereby substantially improving signal-to-noise ratio. As a result, the detector exhibits an infrared response range covering from 1.12 to 4.4μm with a peak at 3.3μm, excluding its intrinsic response in visible range. Its peak quantum efficiency surpasses that of the best mid-infrared silicon-based detector reported to date by an order of magnitude, reaching 2% at room temperature. The peak detectivity at 90K is 1.4E11 Jones @1.4V and decreases to 4.4E9 Jones @1.4V, 210K, comparable to the typical III-V and IV-VI photodetectors at one thousandth fabrication cost. Leveraging the well-established silicon-based manufacturing process, this device holds promise for large-scale production at a reduced price, offering a cost-effective solution for future mid-infrared detection. △ Less

Submitted 7 May, 2024; v1 submitted 4 May, 2024; originally announced May 2024.

Efficient molecular conformation generation with quantum-inspired algorithm

Authors: Yunting Li, Xiaopeng Cui, Zhaoping Xiong, Zuoheng Zou, Bowen Liu, Bi-Ying Wang, Runqiu Shu, Huangjun Zhu, Nan Qiao, Man-Hong Yung

Abstract: Conformation generation, also known as molecular unfolding (MU), is a crucial step in structure-based drug design, remaining a challenging combinatorial optimization problem. Quantum annealing (QA) has shown great potential for solving certain combinatorial optimization problems over traditional classical methods such as simulated annealing (SA). However, a recent study showed that a 2000-qubit QA… ▽ More Conformation generation, also known as molecular unfolding (MU), is a crucial step in structure-based drug design, remaining a challenging combinatorial optimization problem. Quantum annealing (QA) has shown great potential for solving certain combinatorial optimization problems over traditional classical methods such as simulated annealing (SA). However, a recent study showed that a 2000-qubit QA hardware was still unable to outperform SA for the MU problem. Here, we propose the use of quantum-inspired algorithm to solve the MU problem, in order to go beyond traditional SA. We introduce a highly-compact phase encoding method which can exponentially reduce the representation space, compared with the previous one-hot encoding method. For benchmarking, we tested this new approach on the public QM9 dataset generated by density functional theory (DFT). The root-mean-square deviation between the conformation determined by our approach and DFT is negligible (less than about 0.5 Angstrom), which underpins the validity of our approach. Furthermore, the median time-to-target metric can be reduced by a factor of five compared to SA. Additionally, we demonstrate a simulation experiment by MindQuantum using quantum approximate optimization algorithm (QAOA) to reach optimal results. These results indicate that quantum-inspired algorithms can be applied to solve practical problems even before quantum hardware become mature. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Photonic-Electronic Integrated Circuits for High-Performance Computing and AI Accelerators

Authors: Shupeng Ning, Hanqing Zhu, Chenghao Feng, Jiaqi Gu, Zhixing Jiang, Zhoufeng Ying, Jason Midkiff, Sourabh Jain, May H. Hlaing, David Z. Pan, Ray T. Chen

Abstract: In recent decades, the demand for computational power has surged, particularly with the rapid expansion of artificial intelligence (AI). As we navigate the post-Moore's law era, the limitations of traditional electrical digital computing, including process bottlenecks and power consumption issues, are propelling the search for alternative computing paradigms. Among various emerging technologies, i… ▽ More In recent decades, the demand for computational power has surged, particularly with the rapid expansion of artificial intelligence (AI). As we navigate the post-Moore's law era, the limitations of traditional electrical digital computing, including process bottlenecks and power consumption issues, are propelling the search for alternative computing paradigms. Among various emerging technologies, integrated photonics stands out as a promising solution for next-generation high-performance computing, thanks to the inherent advantages of light, such as low latency, high bandwidth, and unique multiplexing techniques. Furthermore, the progress in photonic integrated circuits (PICs), which are equipped with abundant photoelectronic components, positions photonic-electronic integrated circuits as a viable solution for high-performance computing and hardware AI accelerators. In this review, we survey recent advancements in both PIC-based digital and analog computing for AI, exploring the principal benefits and obstacles of implementation. Additionally, we propose a comprehensive analysis of photonic AI from the perspectives of hardware implementation, accelerator architecture, and software-hardware co-design. In the end, acknowledging the existing challenges, we underscore potential strategies for overcoming these issues and offer insights into the future drivers for optical computing. △ Less

Submitted 11 July, 2024; v1 submitted 21 March, 2024; originally announced March 2024.

Field Line Curvature Scattering in the Dayside Off-Equatorial Minima Regions

Authors: Bin Cai, Hui Zhu

Abstract: Magnetic field line curvature (FLC) scattering is an effective mechanism for collisionless particle scattering. In the terrestrial magnetosphere, the FLC scattering plays an essential role in shaping the outer boundary of protons radiation belt, the rapid decay of ring current, and the formation of proton isotropic boundary (IB). However, previous studies have yet to adequately investigate the inf… ▽ More Magnetic field line curvature (FLC) scattering is an effective mechanism for collisionless particle scattering. In the terrestrial magnetosphere, the FLC scattering plays an essential role in shaping the outer boundary of protons radiation belt, the rapid decay of ring current, and the formation of proton isotropic boundary (IB). However, previous studies have yet to adequately investigate the influence of FLC scattering on charged particles in the Earth's dayside magnetosphere, particularly in the off-equatorial magnetic minima regions. This study employs T89 magnetic field model to investigate the impacts of FLC scattering on ring current protons in the dayside magnetosphere, with a specific focus on the off-equatorial minimum regions. We analyze the spatial distributions of single and dual magnetic minima regions, adiabatic parameter, and pitch angle diffusion coefficients due to FLC scattering as functions of $Kp$. The results show that the effects of FLC scattering are significant not only on the dusk and dawn sides but also in the off-equatorial minima regions on the noon. Additionally, we investigate the role of dipole tilt angle in the hemispheric asymmetry of FLC scattering effects. The dipole tilt angle controls the overall displacement of the dayside magnetosphere, resulting in different FLC scattering effects in the two hemispheres. Our study holds significance for understanding the FLC scattering effects in the off-equatorial region of Earth's dayside magnetosphere and for constructing a more accurate dynamic model of particles. △ Less

Submitted 14 March, 2024; originally announced March 2024.

Proton-CAT: a Novel Strategy for Enhanced Proton Therapy

Authors: Zhao Sun, Zhencen He, Zhuohang He, Junxiang Wu, Liyuan Deng, Zhuohang He, Ziqi Chen, Junkang Jiang, Hang Zhu, Shuyu Zhang, Zhimin Hu

Abstract: We present a nitrogen-targeting-Proton-Carbon-Alpha-Therapy method, abbreviated as Proton-CAT, which partially converts protons into carbon-12 and $α$ particles through nuclear reactions between protons and nitrogen-15. Monte Carlo simulations validated the effectiveness of the Proton-CAT, and the study specifically focused on the distribution of relative energy deposition. The results indicated t… ▽ More We present a nitrogen-targeting-Proton-Carbon-Alpha-Therapy method, abbreviated as Proton-CAT, which partially converts protons into carbon-12 and $α$ particles through nuclear reactions between protons and nitrogen-15. Monte Carlo simulations validated the effectiveness of the Proton-CAT, and the study specifically focused on the distribution of relative energy deposition. The results indicated that the presence of nitrogen-15 enhanced the maximum dose level of protons, resulting in more effective damage confined to tumor cells. Statistical analysis of secondary ions has shown that the Proton-CAT significantly increases the production efficiencies of carbon-12 and $α$ particles. Furthermore, it has been revealed that elevating the nitrogen-15 concentration significantly boosts the dose of carbon and $α$ particles within the tumor region. The present work would contribute to the future development of proton therapy. △ Less

Submitted 16 April, 2024; v1 submitted 5 February, 2024; originally announced February 2024.

Comments: 5 pages, 4figures

Entangling two exciton modes using exciton optomechanics

Authors: Xuan Zuo, Zhi-Yuan Fan, Huai-Bing Zhu, Jie Li

Abstract: Exciton optomechanics, bridging cavity exciton polaritons and optomechanics, opens new opportunities for the study of light-matter strong interactions and nonlinearities, due to the rich nonlinear couplings among excitons, phonons, and photons. Here, we propose to entangle two exciton modes in an exciton-optomechanics system, which consists of a semiconductor microcavity integrated with two quantu… ▽ More Exciton optomechanics, bridging cavity exciton polaritons and optomechanics, opens new opportunities for the study of light-matter strong interactions and nonlinearities, due to the rich nonlinear couplings among excitons, phonons, and photons. Here, we propose to entangle two exciton modes in an exciton-optomechanics system, which consists of a semiconductor microcavity integrated with two quantum wells. The quantum wells support two exciton modes, which simultaneously couple to an optical cavity mode via a linear dipole interaction and to a mechanical vibration mode via a nonlinear deformation potential interaction. We show that by strongly driving the microcavity with a red-detuned laser field and when the two exciton modes are respectively resonant with the Stokes and anti-Stokes sidebands scattered by the mechanical motion, stationary entanglement between the two exciton modes can be established under realistic parameters. The protocol is within reach of current technology and may become a promising approach for preparing excitonic entanglement. △ Less

Submitted 22 October, 2024; v1 submitted 4 February, 2024; originally announced February 2024.

Journal ref: Phys. Rev. A 110, 053502 (2024)

Characteristics of the MTx optical transmitter in Total Ionizing Dose

Authors: D. Gong, S. Hou, B. J. Juang, J. -H. Li, C. Liu, T. Liu, M. Qi, J. Ye, Lei Zhang, Li Zhang, H. P. Zhu

Abstract: The dual-channel multi-mode 850 nm optical Miniature Transmitter (MTx) is developed for data transmission of the ATLAS LAr calorimeter readout at LHC. The MTx's are exposed to the radiation field of proton-proton collisions, therefore, the tolerance in Total Ionizing Dose (TID) is required. The TID effects in the MTx are investigated with X-rays and Co-60 gamma-rays for the active components of VC… ▽ More The dual-channel multi-mode 850 nm optical Miniature Transmitter (MTx) is developed for data transmission of the ATLAS LAr calorimeter readout at LHC. The MTx's are exposed to the radiation field of proton-proton collisions, therefore, the tolerance in Total Ionizing Dose (TID) is required. The TID effects in the MTx are investigated with X-rays and Co-60 gamma-rays for the active components of VCSEL diodes and the customized Link-on-Chip laser driver (LOCld) developed in 0.25 um Silicon-on-Sapphire CMOS technology. The irradiation tests were conducted at various dose rates. The responses to TID are observed with degradation of laser currents at initial dose of 10 to 100 Gy(SiO2), and partial recovery with additional TID to a stable output about 90 % of the original. The optical eye diagrams of irradiated samples show slightly increased jittering, and are suitable for the ATLAS requirement of 5 Gbps applications. △ Less

Submitted 28 April, 2024; v1 submitted 29 January, 2024; originally announced January 2024.

Comments: 7 pages, 10 figures

Interference of Two-Dimensional Bose-Einstein Condensates in Micro-Gravity

Authors: Tie-Fu Zhang, Hao Zhu, Wen-Kai Bai, Kai Liu, Yi-Hui Xing, Wu-Ming Liu

Abstract: We investigate the interference of two-dimensional Bose-Einstein condensates in micro-gravity, which influenced by the interaction strength, initial momentum, gravitational potential and phase difference. We demonstrate that the gravitational potential from the Earth can change the density distribution and phase distribution of the condensate's wave function. As time evolves, a portion of the grav… ▽ More We investigate the interference of two-dimensional Bose-Einstein condensates in micro-gravity, which influenced by the interaction strength, initial momentum, gravitational potential and phase difference. We demonstrate that the gravitational potential from the Earth can change the density distribution and phase distribution of the condensate's wave function. As time evolves, a portion of the gravitational potential energy of the microscopic particles can be converted into kinetic energy, which changes the motion of the microscopic particles, and leads to the varying of the density and phase distribution of the wave function. Nevertheless, the influences of the Earth's gravity on the wave function can be eliminated by the micro-gravity environment, which confirmed by many micro-gravity cold atom experiments. Our results present the influences of gravity and other parameters on interference of Bose-Einstein condensates, which help us to reveal the intrinsic natures of the related theoretical predictions and experimental phenomena. Furthermore, our work builds a bridge between the related physical phenomena and our physical intuition about the Bose-Einstein condensates in micro-gravity environment. △ Less

Submitted 1 January, 2024; originally announced January 2024.

Intrinsic toroidal rotation driven by turbulent and neoclassical processes in tokamak plasmas from global gyrokinetic simulations

Authors: Hongxuan Zhu, T. Stoltzfus-Dueck, R. Hager, S. Ku, C. S. Chang

Abstract: Gyrokinetic tokamak plasmas can exhibit intrinsic toroidal rotation driven by the residual stress. While most studies have attributed the residual stress to the parallel-momentum flux from the turbulent $\boldsymbol{E}\times\boldsymbol{B}$ motion, the parallel-momentum flux from the drift-orbit motion (denoted $Π_\parallel^D$) and the $\boldsymbol{E}\times\boldsymbol{B}$-momentum flux from the… ▽ More Gyrokinetic tokamak plasmas can exhibit intrinsic toroidal rotation driven by the residual stress. While most studies have attributed the residual stress to the parallel-momentum flux from the turbulent $\boldsymbol{E}\times\boldsymbol{B}$ motion, the parallel-momentum flux from the drift-orbit motion (denoted $Π_\parallel^D$) and the $\boldsymbol{E}\times\boldsymbol{B}$-momentum flux from the $\boldsymbol{E}\times\boldsymbol{B}$ motion (denoted $Π_{E\times B}$) are often neglected. Here, we use the global total-$f$ gyrokinetic code XGC to study the residual stress in the core and the edge of a DIII-D H-mode plasma. Numerical results show that both $Π_\parallel^D$ and $Π_{E\times B}$ make up a significant portion of the residual stress. In particular, $Π_\parallel^D$ in the core is higher than the collisional neoclassical level in the presence of turbulence, while in the edge it represents an outflux of counter-current momentum even without turbulence. Using a recently developed ``orbit-flux'' formulation, we show that the higher-than-neoclassical-level $Π_\parallel^D$ in the core is driven by turbulence, while the outflux of counter-current momentum from the edge is mainly due to collisional ion orbit loss. These results suggest that $Π_\parallel^D$ and $Π_{E\times B}$ can be important for the study of intrinsic toroidal rotation. △ Less

Submitted 28 May, 2024; v1 submitted 14 December, 2023; originally announced December 2023.

Journal ref: Phys. Rev. Lett. 133, 025101 (2024)