Showing 1–50 of 81 results for author: Zhao, D

In-flight calibration of the Lobster Eye Imager for Astronomy

Authors: Huaqing Cheng, Hai-Wu Pan, Yuan Liu, Jingwei Hu, Haonan Yang, Donghua Zhao, Zhixing Ling, He-Yang Liu, Yifan Chen, Xiaojin Sun, Longhui Li, Ge Jin, Chen Zhang, Shuang-Nan Zhang, Weimin Yuan

Abstract: The Lobster Eye Imager for Astronomy (LEIA), as a pathfinder of the Wide-field X-ray Telescope (WXT) onboard the Einstein Probe (EP) satellite, is the first lobster-eye focusing X-ray telescope with a considerably large field-of-view (FoV) ever flown. During the two and half years of operations, a series of calibration observations were performed, to fully characterize its performance and calibrat… ▽ More The Lobster Eye Imager for Astronomy (LEIA), as a pathfinder of the Wide-field X-ray Telescope (WXT) onboard the Einstein Probe (EP) satellite, is the first lobster-eye focusing X-ray telescope with a considerably large field-of-view (FoV) ever flown. During the two and half years of operations, a series of calibration observations were performed, to fully characterize its performance and calibrate the instrumental properties. In this paper, we present the results of the in-flight calibration campaign of LEIA, focusing on the properties of the PSF, source positional accuracy, effective area, energy response and the instrumental background. The calibration sources used are the Crab nebula, Sco X-1 and Cassiopeia A supernova remnant. Specifically, it is found that the spatial resolution remains almost unchanged compared to the pre-launch values, ranging from 3.6'-9.3' with a median of 5.9'. The post-calibration source positional accuracy is found to be ~2' (at the 90% C.L.). The Crab spectra can be well reproduced by the absorbed power-law model with the best-fit parameters in large agreement with the literature values, indicating that the in-orbit effective area is overall consistent with the model predictions and ground measurements. The effective area exhibits a systematic of $\lesssim10\%$ (at the 68% C.L.), and a mild deterioration of ~15% at the lower energy end after one year of operation. The Cas A spectral analysis shows that the energy scale and spectral resolution of the detectors are generally consistent with ground values. The instrumental background is found to be largely consistent among the four detectors, with strong modulations by the geomagnetic activity and the spectrum qualitatively consistent with our previous simulations. These instrumental performances well meet the design requirements. This work paves the way for the in-orbit calibration of the EP-WXT. △ Less

Submitted 25 June, 2025; originally announced June 2025.

Comments: 14 pages, 14 figures, 2 tables. Submitted to Astronomy & Astrophysics

Evolution of Rayleigh-Taylor turbulence under vorticity and strain-rate control

Authors: Dongxiao Zhao, Gaojin Li

Abstract: We investigate the role of small-scale structures in turbulent Rayleigh-Taylor (RT) flows through the application of preferential flow control targeting high vorticity or high strain-rate regions (Buzzicotti et al. 2020). Through numerical simulations, we analyze the effects of flow control on RT statistics, mixing, and anisotropy behavior. Our results reveal that eliminating intense small-scale m… ▽ More We investigate the role of small-scale structures in turbulent Rayleigh-Taylor (RT) flows through the application of preferential flow control targeting high vorticity or high strain-rate regions (Buzzicotti et al. 2020). Through numerical simulations, we analyze the effects of flow control on RT statistics, mixing, and anisotropy behavior. Our results reveal that eliminating intense small-scale motion leads to the formation of more organized and coherent flow structures, with reduced mixing and enhanced anisotropy. The alignment of vorticity and scalar gradient with the strain-rate eigen-frame is also altered by the flow control, reducing the downscale cascade of kinetic energy and the scalar variance. When the control threshold is set below the spatial mean of the vorticity or strain-rate field, turbulent motion in RT is significantly suppressed. Moreover, flow control eliminates regions of extreme vorticity and strain-rate, leading to overlapped high vorticity and high strain-rate regions with reduced turbulence intensity and more coherent structures. These findings provide a deeper understanding of the fundamental mechanisms played by small-scale structures in RT flows and their modulation through flow control. This work has broader implications for realistic scenarios, such as RT flows under magnetic fields or rotation, where suppression of small-scale motions plays a critical role. △ Less

Submitted 8 June, 2025; originally announced June 2025.

Comments: Accepted by Physics of Fluids

Ground Calibration Result of the Wide-field X-ray Telescope (WXT) onboard the Einstein Probe

Authors: Huaqing Cheng, Chen Zhang, Zhixing Ling, Xiaojin Sun, Shengli Sun, Yuan Liu, Yanfeng Dai, Zhenqing Jia, Haiwu Pan, Wenxin Wang, Donghua Zhao, Yifan Chen, Zhiwei Cheng, Wei Fu, Yixiao Han, Junfei Li, Zhengda Li, Xiaohao Ma, Yulong Xue, Ailiang Yan, Qiang Zhang, Yusa Wang, Xiongtao Yang, Zijian Zhao, Longhui Li , et al. (2 additional authors not shown)

Abstract: We report on results of the on-ground X-ray calibration of the Wide-field X-ray Telescope (WXT) built from novel lobster-eye micro-pore optics, onboard the Einstein Probe (EP) satellite. To fully characterize the instrumental performance and properties, a series of tests and calibrations have been carried out at different levels of devices, assemblies and the complete module before the launch of E… ▽ More We report on results of the on-ground X-ray calibration of the Wide-field X-ray Telescope (WXT) built from novel lobster-eye micro-pore optics, onboard the Einstein Probe (EP) satellite. To fully characterize the instrumental performance and properties, a series of tests and calibrations have been carried out at different levels of devices, assemblies and the complete module before the launch of EP. In this paper, we present the calibration results of three flight model modules (FM1, FM5 and FM11) obtained during their end-to-end module calibration experiments carried out at the 100-m X-ray Test Facility (100XF) of IHEP, CAS. Measurements of the Point Spread Function (PSF), effective area, and energy response were performed for multiple incident directions and several characteristic X-ray emission line energies. Specifically, the distributions of the PSF and effective areas are found to be roughly uniform across the FoV, in large agreement with the prediction of lobster-eye optics. Their energy dependence behavior aligns well with theoretical predictions and Monte Carlo simulations. At 1.25 keV, the full width at half maximum (FWHM) of the focal spot is in range of 3-7 arcmin (a median of 4.2) and the effective area in range of 2-3 $cm^2$. Noticeably, the flight model instruments demonstrate a $\sim1.5$ arcmin spatial resolution improvement over the previously launched Lobster Eye Imager for Astronomy. The properties of the complementary metal-oxide semiconductor (CMOS) sensors were also calibrated. The gain coefficients are in range of 6.4-6.9 eV/DN. The energy resolutions are in range of 120-140 eV at 1.25 keV, meeting design requirements. These calibration results have been ingested into the first version of calibration database (CALDB) and applied to the analysis of the scientific data acquired by WXT after the launch of EP. △ Less

Submitted 24 May, 2025; originally announced May 2025.

Comments: 28 pages, 18 figures, 2 tables. submitted to Experimental Astronomy

MolSpectra: Pre-training 3D Molecular Representation with Multi-modal Energy Spectra

Authors: Liang Wang, Shaozhen Liu, Yu Rong, Deli Zhao, Qiang Liu, Shu Wu, Liang Wang

Abstract: Establishing the relationship between 3D structures and the energy states of molecular systems has proven to be a promising approach for learning 3D molecular representations. However, existing methods are limited to modeling the molecular energy states from classical mechanics. This limitation results in a significant oversight of quantum mechanical effects, such as quantized (discrete) energy le… ▽ More Establishing the relationship between 3D structures and the energy states of molecular systems has proven to be a promising approach for learning 3D molecular representations. However, existing methods are limited to modeling the molecular energy states from classical mechanics. This limitation results in a significant oversight of quantum mechanical effects, such as quantized (discrete) energy level structures, which offer a more accurate estimation of molecular energy and can be experimentally measured through energy spectra. In this paper, we propose to utilize the energy spectra to enhance the pre-training of 3D molecular representations (MolSpectra), thereby infusing the knowledge of quantum mechanics into the molecular representations. Specifically, we propose SpecFormer, a multi-spectrum encoder for encoding molecular spectra via masked patch reconstruction. By further aligning outputs from the 3D encoder and spectrum encoder using a contrastive objective, we enhance the 3D encoder's understanding of molecules. Evaluations on public benchmarks reveal that our pre-trained representations surpass existing methods in predicting molecular properties and modeling dynamics. △ Less

Submitted 22 February, 2025; originally announced February 2025.

Comments: Accepted by ICLR 2025

AI Models Still Lag Behind Traditional Numerical Models in Predicting Sudden-Turning Typhoons

Authors: Daosheng Xu, Zebin Lu, Jeremy Cheuk-Hin Leung, Dingchi Zhao, Yi Li, Yang Shi, Bin Chen, Gaozhen Nie, Naigeng Wu, Xiangjun Tian, Yi Yang, Shaoqing Zhang, Banglin Zhang

Abstract: Given the interpretability, accuracy, and stability of numerical weather prediction (NWP) models, current operational weather forecasting relies heavily on the NWP approach. In the past two years, the rapid development of Artificial Intelligence (AI) has provided an alternative solution for medium-range (1-10 days) weather forecasting. Bi et al. (2023) (hereafter Bi23) introduced the first AI-base… ▽ More Given the interpretability, accuracy, and stability of numerical weather prediction (NWP) models, current operational weather forecasting relies heavily on the NWP approach. In the past two years, the rapid development of Artificial Intelligence (AI) has provided an alternative solution for medium-range (1-10 days) weather forecasting. Bi et al. (2023) (hereafter Bi23) introduced the first AI-based weather prediction (AIWP) model in China, named Pangu-Weather, which offers fast prediction without compromising accuracy. In their work, Bi23 made notable claims regarding its effectiveness in extreme weather predictions. However, this claim lacks persuasiveness because the extreme nature of the two tropical cyclones (TCs) examples presented in Bi23, namely Typhoon Kong-rey and Typhoon Yutu, stems primarily from their intensities rather than their moving paths. Their claim may mislead into another meaning which is that Pangu-Weather works well in predicting unusual typhoon paths, which was not explicitly analyzed. Here, we reassess Pangu-Weather's ability to predict extreme TC trajectories from 2020-2024. Results reveal that while Pangu-Weather overall outperforms NWP models in predicting tropical cyclone (TC) tracks, it falls short in accurately predicting the rarely observed sudden-turning tracks, such as Typhoon Khanun in 2023. We argue that current AIWP models still lag behind traditional NWP models in predicting such rare extreme events in medium-range forecasts. △ Less

Submitted 21 February, 2025; originally announced February 2025.

Modeling Concentration Profiles in Electrolytes by Solving 3-D Poisson-Nernst-Planck Equations via Finite Difference Method

Authors: Yitao He, Dan Zhao

Abstract: The Poisson-Nernst-Planck (PNP) equations are fundamental for modeling ion transport in electrochemical systems, capturing the intricate interplay of concentration gradients, electric fields, and ion fluxes essential for applications such as energy storage devices and other electrochemical devices. This study introduces a refined numerical framework employing the finite difference method to solve… ▽ More The Poisson-Nernst-Planck (PNP) equations are fundamental for modeling ion transport in electrochemical systems, capturing the intricate interplay of concentration gradients, electric fields, and ion fluxes essential for applications such as energy storage devices and other electrochemical devices. This study introduces a refined numerical framework employing the finite difference method to solve the 3-D PNP equations, enabling precise simulation of ion concentration distributions under realistic boundary conditions and applied electric fields. By rigorously addressing stability criteria and integrating advanced boundary constraints, including the Butler-Volmer equation for surface reactions, the model provides comprehensive insights into ion dynamics, particularly near electrode surfaces where electric field and reaction effects dominate. This framework significantly enhances traditional PNP modeling by accommodating varied boundary conditions, diffusion anisotropy, and complex electrochemical environments, offering a robust tool for investigating electrochemical processes and guiding the design of advanced electrochemical systems. △ Less

Submitted 10 January, 2025; originally announced January 2025.

Calculating Spectra by Sequential High-Pass Filtering

Authors: Dongxiao Zhao, Hussein Aluie

Abstract: We expand on the method of sequential filtering for calculating spectra of inhomogeneous fields. Sadek & Aluie [Phys. Rev. Fluids, 3, 124610 (2018)] showed that the kernel has to have at least $p$ vanishing moments to extract a power-law spectrum $k^{-α}$ with $α<p+2$ by low-pass filtering. Here, we show that sequential high-pass filtering allows for extracting steeper spectra with $α<2p+3$ using… ▽ More We expand on the method of sequential filtering for calculating spectra of inhomogeneous fields. Sadek & Aluie [Phys. Rev. Fluids, 3, 124610 (2018)] showed that the kernel has to have at least $p$ vanishing moments to extract a power-law spectrum $k^{-α}$ with $α<p+2$ by low-pass filtering. Here, we show that sequential high-pass filtering allows for extracting steeper spectra with $α<2p+3$ using the same $p$-th order kernel. For example, any spectrum of a field that is shallower than $k^{-5}$ can be extracted by sequential high-pass filtering using any 1st order kernel such as a Gaussian or top-hat. Finally, we demonstrate how second-order structure functions fail to capture spectral peaks because they cannot detect scaling that is too shallow. △ Less

Submitted 17 December, 2024; v1 submitted 16 December, 2024; originally announced December 2024.

Comments: 15 pages, 5 figures, JRSE special issue in honor of Charles Meneveau

Label-Free Intraoperative Mean-Transition-Time Image Generation Using Statistical Gating and Deep Learning

Authors: Yan Shi, Denghui Zhao, Jingyi Yu, Wei Ni, Pengcheng Li, Yun Gu, Peng Miao, Shanbao Tong

Abstract: It is of paramount importance to visualize blood dynamics intraoperatively, as this enables the accurate diagnosis of intraoperative conditions and facilitates informed surgical decision-making. Indocyanine green (ICG) fluorescence imaging represents the gold standard for the assessment of blood flow and the identification of vascular structures. However, it has several disadvantages, including ti… ▽ More It is of paramount importance to visualize blood dynamics intraoperatively, as this enables the accurate diagnosis of intraoperative conditions and facilitates informed surgical decision-making. Indocyanine green (ICG) fluorescence imaging represents the gold standard for the assessment of blood flow and the identification of vascular structures. However, it has several disadvantages, including time-consuming data acquisition, mandatory waiting periods, potential allergic reactions, and complex operations. Laser speckle contrast imaging (LSCI) provides an alternative for label-free assessment of blood flow; however, it lacks the necessary information for distinguishing arteries from veins and determining blood flow direction. Such information may be inferred from a Mean Transition Time (MTT) image derived from fluorescence imaging. In order to address these challenges, we propose the implementation of a Mixed Attention Dense UNet (MA-DenseUNet), which will be used to generate synthetic MTT images based on statistically gated deep tissue contrast and white light images. The proposed method provides clear delineation of vasculature, differentiation of arteries and veins, decoding of blood flow direction, and a reduction in imaging time by a minimum of 97.69%. This study demonstrates the potential of deep learning to optimize intraoperative optical imaging techniques, thereby providing faster and more efficient label-free surgical guidance. △ Less

Submitted 24 November, 2024; originally announced November 2024.

Triad of Equivalence Theorems for the Radiant Intensity of Partially Coherent Beams on Scattering

Authors: Yi Ding, Daomu Zhao

Abstract: By using Laplace's method for double integrals and the so-called beam condition obeyed by a partially coherent beamlike light field, we report the equivalence theory (ET) of partially coherent beams on scattering for the first time. We present the necessary and sufficient condition for the two scattered fields that have the same normalized radiant intensity distribution when Gaussian Schell-model… ▽ More By using Laplace's method for double integrals and the so-called beam condition obeyed by a partially coherent beamlike light field, we report the equivalence theory (ET) of partially coherent beams on scattering for the first time. We present the necessary and sufficient condition for the two scattered fields that have the same normalized radiant intensity distribution when Gaussian Schell-model beams whose effective beam widths are much greater than the effective transverse spectral coherence lengths are scattered by Gaussian Schell-model media. We find that the condition contain three implications, and each of them corresponds to a statement of an ET of radiant intensity in a scattering scenario, which exposes the concept of a previously unreported triad of ETs for the radiant intensity of partially coherent beams on scattering. We further find that the existing ET of plane waves on scattering, which only asserts that two scatterers with scattering potentials' correlations whose low-frequency antidiagonal spatial Fourier components are identical, essentially is merely the first member of our triad of ETs, while the other two hidden important members are completely ignored. Our findings are crucial for the inverse scattering problem since they contribute to avoid possible reconstruction errors in realistic situations, where the light field used to illuminate an unknown object is a partially coherent beam rather than an idealized plane wave. △ Less

Submitted 12 November, 2024; originally announced November 2024.

Observation of Moiré Plasmonic Skyrmion Clusters

Authors: Lan Zhang, Lipeng Wan, Weimin Deng, Liang Hou, Qiushun Zou, Tongbiao Wang, Daomu Zhao, Tianbao Yu

Abstract: Skyrmions are topological defects belonging to nontrivial homotopy classes in particle theory. Their remarkably stable topology has recently been observed in electromagnetic waves. For the evanescent fields near a surface, this has been realized so far only for elementary optical skyrmions, with a fixed skyrmion number. Here we report, both in theory and experiment, the concept of moiré plasmonic… ▽ More Skyrmions are topological defects belonging to nontrivial homotopy classes in particle theory. Their remarkably stable topology has recently been observed in electromagnetic waves. For the evanescent fields near a surface, this has been realized so far only for elementary optical skyrmions, with a fixed skyrmion number. Here we report, both in theory and experiment, the concept of moiré plasmonic skyrmion clusters, where multi-skyrmions are nested to form a large optical skyrmion cluster. By leveraging twistronics engineering of plasmonic nanostructures, we demonstrate both crystallized and quasi-crystallized optical skyrmion lattices, revealing an unprecedented degree of topological control. In a misaligned composite nanostructure, the rapid inverting of optical skyrmion number is achieved, which is explained by a lattice model. This topological change of moiréplasmonic skyrmion clusters can serve as a precise beacon of the relative alignment deviation between composite nanostructures. △ Less

Submitted 10 May, 2025; v1 submitted 8 November, 2024; originally announced November 2024.

Comments: A related outstanding study on moire optical skyrmion superlattice in space-time domain appeared: Nat. Phys. (2025). https://doi.org/10.1038/s41567-025-02873-1

Extrinsic suppression of anomalous Hall effect in Fe-rich kagome magnet Fe3Sn

Authors: Muhua Liu, Li Ma, Guoke Li, Congmian Zhen, Denglu Hou, Dewei Zhao

Abstract: In Fe-based kagome magnets, Fe3Sn has been predicted to have the largest intrinsic anomalous Hall conductivity (AHC) and the highest Curie temperature TC = 743 K. However, the current experimental results show that the total AHC is much lower than the predicted value due to the strong extrinsic contribution. To suppress the extrinsic contribution and thus enhance the intrinsic contribution, we inc… ▽ More In Fe-based kagome magnets, Fe3Sn has been predicted to have the largest intrinsic anomalous Hall conductivity (AHC) and the highest Curie temperature TC = 743 K. However, the current experimental results show that the total AHC is much lower than the predicted value due to the strong extrinsic contribution. To suppress the extrinsic contribution and thus enhance the intrinsic contribution, we increased the Fe content in the stoichiometric Fe3Sn. We found that the extrinsic contribution is greatly suppressed, and the intrinsic contribution is dominant and is close to the theoretically predicted value of 555 S/cm over the whole temperature range. Based on the formula of the skew scattering, we analyzed the reason why the skew scattering is suppressed and found that the spin-orbit coupling strength provided by the impurity center is the key. The spin-orbit coupling strength provided by Fe as an impurity center in this study is much smaller than that of Sn as an impurity center in previous studies. Therefore, the AHC in Fe-rich Fe3Sn obeys the unified theory, while the AHC in Sn-rich Fe3Sn deviates from the unified theory. Our study provides a promising solution for the regulation of the extrinsic contribution to the anomalous Hall effect in kagome magnets. △ Less

Submitted 1 November, 2024; originally announced November 2024.

Ultra-Thin, Ultra-Light, Rainbow-Free AR Glasses Based on Single-Layer Full-Color SiC Diffrcative Waveguide

Authors: Boqu Chen, Ce Li, Xiaoxuan Li, Ding Zhao, Lu Cai, Kaikai Du, Min Qiu

Abstract: As information interaction technology advances, the efficiency, dimensionality, and user experience of information transmission have significantly improved. Communication has evolved from letters to telegraphs, markedly increasing transmission speed; from telephones to video calls, enhancing communication dimensions; and from smartphones to augmented reality (AR) displays, which provide increasing… ▽ More As information interaction technology advances, the efficiency, dimensionality, and user experience of information transmission have significantly improved. Communication has evolved from letters to telegraphs, markedly increasing transmission speed; from telephones to video calls, enhancing communication dimensions; and from smartphones to augmented reality (AR) displays, which provide increasingly immersive user experiences. Surface relief grating (SRG) diffractive waveguides have attracted considerable attention for their optimal balance between weight, size, optical performance, and mass production capabilities, positioning them as a leading solution for AR displays. However, as consumer expectations for higher display quality and better device integration rise, traditional high-refractive-index glass-based diffractive waveguides face limitations, including bulkiness, heavy weight, and conspicuous rainbow artifacts in full-color displays. To overcome these challenges, a novel solution: ultra-thin, lightweight silicon carbide (SiC) AR prescription glasses was proposed. This solution achieves full-color displays without rainbow artifacts, with total weight of just 2.685 g and thickness of only 0.55 mm. Moreover, these glasses are compatible with prescription Fresnel lenses and are well-suited for scalable mass production. This innovation provides a robust platform for the seamless integration of augmented reality into daily life, offering significant potential to enhance user interaction. △ Less

Submitted 22 September, 2024; originally announced September 2024.

Extraction of Weak Surface Diaphragmatic Electromyogram Using Modified Progressive FastICA Peel-Off

Authors: Yao Li, Dongsheng Zhao, Haowen Zhao, Xu Zhang, Min Shao

Abstract: Diaphragmatic electromyogram (EMGdi) contains crucial information about human respiration therefore can be used to monitor respiratory condition. Although it is practical to record EMGdi noninvasively and conveniently by placing surface electrodes over chest skin, extraction of such weak surface EMGdi (sEMGdi) from great noisy environment is a challenging task, limiting its clinical use compared w… ▽ More Diaphragmatic electromyogram (EMGdi) contains crucial information about human respiration therefore can be used to monitor respiratory condition. Although it is practical to record EMGdi noninvasively and conveniently by placing surface electrodes over chest skin, extraction of such weak surface EMGdi (sEMGdi) from great noisy environment is a challenging task, limiting its clinical use compared with esophageal EMGdi. In this paper, a novel method is presented for extracting weak sEMGdi signal from high-noise environment based on fast independent component analysis (FastICA), constrained FastICA and a peel-off strategy. It is truly a modified version of of progressive FastICA peel-off (PFP) framework, where the constrained FastICA helps to extract and refine respiration-related sEMGdi signals, while the peel-off strategy ensures the complete extraction of weaker sEMGdi components. The method was validated using both synthetic and clinical signals. It was demonstrated that our method was able to extract clean sEMGdi signals efficiently with little distortion. It outperformed state-of-the-art comparison methods in terms of sufficiently high SIR and CORR at all noise levels when tested on synthetic data, while also achieved an accuracy of 95.06% and a F2-score of 96.73% for breath identification on clinical data. The study presents a valuable solution for noninvasive extraction of sEMGdi signals, providing a convenient and valuable way of ventilator synchrony with a significant potential in aiding respiratory rehabilitation and health. △ Less

Submitted 28 June, 2024; v1 submitted 3 June, 2024; originally announced June 2024.

Realization of type-II double-zero-index photonic crystals

Authors: Zebin Zhu, Dong Zhao, Ziyao Wang, Xucheng Yang, Liyong Jiang, Zhen Gao

Abstract: Some photonic crystals (PCs) with Dirac-like conical dispersions exhibit the property of double zero refractive index (that is, both epsilon and mu near zero (EMNZ)), wherein the electromagnetic waves have an infinite effective wavelength and do not experience any spatial phase change. The Dirac-like cones that support EMNZ are previously thought to present only at the center of the Brillouin zone… ▽ More Some photonic crystals (PCs) with Dirac-like conical dispersions exhibit the property of double zero refractive index (that is, both epsilon and mu near zero (EMNZ)), wherein the electromagnetic waves have an infinite effective wavelength and do not experience any spatial phase change. The Dirac-like cones that support EMNZ are previously thought to present only at the center of the Brillouin zone ($Γ$ point) with a zero wavevector (we refer to as type-I EMNZ), which is constrained by the proportional relationship between phase refractive index and wavevector ($n=kc/ω$). Here, we demonstrate the existence of an anomalous type-II EMNZ in PCs, which is associated with the Dirac-like point at off-$Γ$ points. By introducing a wave modulation approach, we theoretically elucidate its physical mechanism, and resolve the paradox of type-II EMNZ with non-zero wavevectors. We then fabricate a type-II EMNZ PC operating at the X point, and experimentally demonstrate that both its effective permittivity and permeability are zero at the Dirac-like point. Type-II EMNZ PCs exhibit a range of intriguing phenomena, including angle-selective transmission, wavefront flattening, a 180$^{\circ}$ phase shift upon transmission, and waveguiding with natural zero radiation loss. The extraordinary properties of type-II EMNZ PCs may open new avenues for the development of angle-selective optical filters, directional light sources, phase-controlled optical switches, ultracompact photonic circuits, nanolasers, and on-chip nonlinear enhancement. △ Less

Submitted 1 June, 2024; originally announced June 2024.

Comments: 38 pages, 13 figures

A Strategy Transfer and Decision Support Approach for Epidemic Control in Experience Shortage Scenarios

Authors: X. Xiao, P. Chen, X. Cao, K. Liu, L. Deng, D. Zhao, Z. Chen, Q. Deng, F. Yu, H. Zhang

Abstract: Epidemic outbreaks can cause critical health concerns and severe global economic crises. For countries or regions with new infectious disease outbreaks, it is essential to generate preventive strategies by learning lessons from others with similar risk profiles. A Strategy Transfer and Decision Support Approach (STDSA) is proposed based on the profile similarity evaluation. There are four steps in… ▽ More Epidemic outbreaks can cause critical health concerns and severe global economic crises. For countries or regions with new infectious disease outbreaks, it is essential to generate preventive strategies by learning lessons from others with similar risk profiles. A Strategy Transfer and Decision Support Approach (STDSA) is proposed based on the profile similarity evaluation. There are four steps in this method: (1) The similarity evaluation indicators are determined from three dimensions, i.e., the Basis of National Epidemic Prevention & Control, Social Resilience, and Infection Situation. (2) The data related to the indicators are collected and preprocessed. (3) The first round of screening on the preprocessed dataset is conducted through an improved collaborative filtering algorithm to calculate the preliminary similarity result from the perspective of the infection situation. (4) Finally, the K-Means model is used for the second round of screening to obtain the final similarity values. The approach will be applied to decision-making support in the context of COVID-19. Our results demonstrate that the recommendations generated by the STDSA model are more accurate and aligned better with the actual situation than those produced by pure K-means models. This study will provide new insights into preventing and controlling epidemics in regions that lack experience. △ Less

Submitted 9 April, 2024; originally announced April 2024.

Comments: 20 pages, 9 figures

Realization of a three-dimensional photonic higher-order topological insulator

Authors: Ziyao Wang, Yan Meng, Bei Yan, Dong Zhao, Linyun Yang, Jing-Ming Chen, Min-Qi Cheng, Tao Xiao, Perry Ping Shum, Gui-Geng Liu, Yihao Yang, Hongsheng Chen, Xiang Xi, Zhen-Xiao Zhu, Biye Xie, Zhen Gao

Abstract: The discovery of photonic higher-order topological insulators (HOTIs) has significantly expanded our understanding of band topology and provided unprecedented lower-dimensional topological boundary states for robust photonic devices. However, due to the vectorial and leaky nature of electromagnetic waves, it is challenging to discover three-dimensional (3D) topological photonic systems and photoni… ▽ More The discovery of photonic higher-order topological insulators (HOTIs) has significantly expanded our understanding of band topology and provided unprecedented lower-dimensional topological boundary states for robust photonic devices. However, due to the vectorial and leaky nature of electromagnetic waves, it is challenging to discover three-dimensional (3D) topological photonic systems and photonic HOTIs have so far still been limited to two dimensions (2D). Here, we report on the first experimental realization of a 3D Wannier-type photonic HOTI in a tight-binding-like metal-cage photonic crystal, whose band structure matches well with that of a 3D tight-binding model due to the confined Mie resonances. By microwave near-field measurements, we directly observe coexisting topological surface, hinge, and corner states in a single 3D photonic HOTI, as predicted by the tight-binding model and simulation results. Moreover, we demonstrate that all-order topological boundary states are self-guided even in the light cone continuum and can be exposed to air without ancillary cladding, making them well-suited for practical applications. Our work thus opens routes to the multi-dimensional robust manipulation of electromagnetic waves at the outer surfaces of 3D cladding-free photonic bandgap materials and may find novel applications in 3D topological integrated photonics devices. △ Less

Submitted 8 April, 2024; originally announced April 2024.

Comments: 23 pages,4 figures

Enhancing single-atom loading in tightly confined dipole traps with ancillary dipole beam

Authors: Guang-Jie Chen, Zhu-Bo Wang, Chenyue Gu, Dong Zhao, Ji-Zhe Zhang, Yan-Lei Zhang, Chun-Hua Dong, Kun Huang, Guang-Can Guo, Chang-Ling Zou

Abstract: Single atoms trapped in tightly focused optical dipole traps provide an excellent experimental platform for quantum computing, precision measurement, and fundamental physics research. In this work, we propose and demonstrate a novel approach to enhancing the loading of single atoms by introducing a weak ancillary dipole beam. The loading rate of single atoms in a dipole trap can be significantly i… ▽ More Single atoms trapped in tightly focused optical dipole traps provide an excellent experimental platform for quantum computing, precision measurement, and fundamental physics research. In this work, we propose and demonstrate a novel approach to enhancing the loading of single atoms by introducing a weak ancillary dipole beam. The loading rate of single atoms in a dipole trap can be significantly improved by only a few tens of microwatts of counter-propagating beam. It was also demonstrated that multiple atoms could be loaded with the assistance of a counter-propagating beam. By reducing the power requirements for trapping single atoms and enabling the trapping of multiple atoms, our method facilitates the extension of single-atom arrays and the investigation of collective light-atom interactions. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 10 pages, 7 figures

Unveiling the GeI2-Assisted Oriented Growth of Perovskite Crystallite for High-Performance Flexible Sn Perovskite Solar Cells

Authors: Huagui Lai, Selina Olthof, Shengqiang Ren, Radha K. Kothandaraman, Matthias Diethelm, Quentin Jeangros, Roland Hany, Ayodhya N. Tiwari, Dewei Zhao, Fan Fu

Abstract: Tin perovskites are emerging as promising alternatives to their lead-based counterparts for high-performance and flexible perovskite solar cells (PSCs). However, their rapid crystallization often leads to inadequate film quality and poor device performance. In this study, the role of GeI2 as an additive is investigated for controlling the nucleation and crystallization processes of formamidium tin… ▽ More Tin perovskites are emerging as promising alternatives to their lead-based counterparts for high-performance and flexible perovskite solar cells (PSCs). However, their rapid crystallization often leads to inadequate film quality and poor device performance. In this study, the role of GeI2 as an additive is investigated for controlling the nucleation and crystallization processes of formamidium tin triiodide (FASnI3). The findings reveal the preferential formation of a Ge-rich layer at the bottom of the perovskite film upon the introduction of GeI2. It is proposed that the initial formation of the Ge-complex acts as a crystallization regulator, promoting oriented growth of subsequent FASnI3 crystals and enhancing overall crystallinity. Through the incorporation of an optimal amount of GeI2, flexible Sn PSCs with an efficiency of 10.8% were achieved. Furthermore, it was observed that the GeI2 additive ensures a remarkable shelf-life for the devices, with the rigid cells retaining 91% of their initial performance after more than 13,800 hours of storage in an N2 gas environment. This study elucidates the mechanistic role of GeI2 in regulating the nucleation and crystallization process of tin perovskites, providing valuable insights into the significance of additive engineering for the development of high-performance flexible tin PSCs. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Exceptional point-based ultrasensitive surface acoustic wave gas sensor

Authors: Xingyu Lu, Yang Yuan, Fa Chen, Xiaoxiao Hou, Yanlong Guo, Leonhard Reindl, Wei Luo, Degang Zhao

Abstract: Exceptional points (EPs) refer to degeneracies in non-Hermitian systems where two or more eigenvalues and their corresponding eigenvectors coalesce. Recently, there has been growing interest in harnessing EPs to enhance the responsivity of sensors. Significant improvements in the sensitivity of sensors in optics and electronics have been developed. In this work, we present a novel ultrasensitive s… ▽ More Exceptional points (EPs) refer to degeneracies in non-Hermitian systems where two or more eigenvalues and their corresponding eigenvectors coalesce. Recently, there has been growing interest in harnessing EPs to enhance the responsivity of sensors. Significant improvements in the sensitivity of sensors in optics and electronics have been developed. In this work, we present a novel ultrasensitive surface acoustic wave (SAW) gas sensor based on EP. We demonstrate its ability to significantly respond to trace amount of hydrogen sulfide (H2S) gas by tuning additional loss to approach the EP, thereby enhancing the responsivity compared to the conventional delay line gas sensors. In addition to high sensitivity, our sensor is robust to temperature variation and exclusive to H2S gas. We propose an innovative method for designing a new generation of ultrasensitive gas sensor. △ Less

Submitted 3 February, 2024; originally announced February 2024.

Observation of tunable topological polaritons in a cavity waveguide

Authors: Dong Zhao, Ziyao Wang, Linyun Yang, Yuxin Zhong, Xiang Xi, Zhenxiao Zhu, Maohua Gong, Qingan Tu, Yan Meng, Bei Yan, Ce Shang, Zhen Gao

Abstract: Topological polaritons characterized by light-matter interactions have become a pivotal platform in exploring new topological phases of matter. Recent theoretical advances unveiled a novel mechanism for tuning topological phases of polaritons by modifying the surrounding photonic environment (light-matter interactions) without altering the lattice structure. Here, by embedding a dimerized chain of… ▽ More Topological polaritons characterized by light-matter interactions have become a pivotal platform in exploring new topological phases of matter. Recent theoretical advances unveiled a novel mechanism for tuning topological phases of polaritons by modifying the surrounding photonic environment (light-matter interactions) without altering the lattice structure. Here, by embedding a dimerized chain of microwave helical resonators (electric dipole emitters) in a metallic cavity waveguide, we report the pioneering observation of tunable topological phases of polaritons by varying the cavity width which governs the surrounding photonic environment and the strength of light-matter interactions. Moreover, we experimentally identified a new type of topological phase transition which includes three non-coincident critical points in the parameter space: the closure of the polaritonic bandgap, the transition of the Zak phase, and the hybridization of the topological edge states with the bulk states. These results reveal some remarkable and uncharted properties of topological matter when strongly coupled to light and provide an innovative design principle for tunable topological photonic devices. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Comments: 6 pages, 4 figures

Ground Calibration Result of the Lobster Eye Imager for Astronomy

Authors: Huaqing Cheng, Zhixing Ling, Chen Zhang, Xiaojin Sun, Shengli Sun, Yuan Liu, Yanfeng Dai, Zhenqing Jia, Haiwu Pan, Wenxin Wang, Donghua Zhao, Yifan Chen, Zhiwei Cheng, Wei Fu, Yixiao Han, Junfei Li, Zhengda Li, Xiaohao Ma, Yulong Xue, Ailiang Yan, Qiang Zhang, Yusa Wang, Xiongtao Yang, Zijian Zhao, Weimin Yuan

Abstract: We report on results of the on-ground X-ray calibration of the Lobster Eye Imager for Astronomy (LEIA), an experimental space wide-field (18.6*18.6 square degrees) X-ray telescope built from novel lobster eye mirco-pore optics. LEIA was successfully launched on July 27, 2022 onboard the SATech-01 satellite. To achieve full characterisation of its performance before launch, a series of tests and ca… ▽ More We report on results of the on-ground X-ray calibration of the Lobster Eye Imager for Astronomy (LEIA), an experimental space wide-field (18.6*18.6 square degrees) X-ray telescope built from novel lobster eye mirco-pore optics. LEIA was successfully launched on July 27, 2022 onboard the SATech-01 satellite. To achieve full characterisation of its performance before launch, a series of tests and calibrations have been carried out at different levels of devices, assemblies and the complete module. In this paper, we present the results of the end-to-end calibration campaign of the complete module carried out at the 100-m X-ray Test Facility at IHEP. The PSF, effective area and energy response of the detectors were measured in a wide range of incident directions at several X-ray line energies. The distributions of the PSF and effective areas are roughly uniform across the FoV, in large agreement with the prediction of lobster-eye optics. The mild variations and deviations from the prediction of idealized lobster-eye optics can be understood to be caused by the imperfect shapes and alignment of the micro-pores as well as the obscuration by the supporting frames, which can be well reproduced by MC simulations. The spatial resolution of LEIA defined by the FWHM of the focal spot ranges from 4-8 arcmin with a median of 5.7. The measured effective areas are in range of 2-3 $cm^2$ at ~1.25 keV across the entire FoV, and its dependence on photon energy is in large agreement with simulations. The gains of the CMOS sensors are in range of 6.5-6.9 eV/DN, and the energy resolutions in the range of ~120-140 eV at 1.25 keV and ~170-190 eV at 4.5 keV. These results have been ingested into the calibration database and applied to the analysis of the scientific data acquired by LEIA. This work paves the way for the calibration of the Wide-field X-Ray Telescope modules of the Einstein Probe mission. △ Less

Submitted 11 December, 2023; originally announced December 2023.

Comments: 24 pages, 13 figures. Submitted to Experimental Astronomy

Arbitrary Engineering of Spatial Caustics with 3D-printed Metasurfaces

Authors: Xiaoyan Zhou, Hongtao Wang, Shuxi Liu, Hao Wang, John You En Chan, Cheng-Feng Pan, Daomu Zhao, Joel K. W. Yang, Cheng-Wei Qiu

Abstract: Caustics occur in diverse physical systems, spanning the nano-scale in electron microscopy to astronomical-scale in gravitational lensing. As envelopes of rays, optical caustics result in sharp edges or extended networks. Caustics in structured light, characterized by complex-amplitude distributions, have innovated numerous applications including particle manipulation, high-resolution imaging tech… ▽ More Caustics occur in diverse physical systems, spanning the nano-scale in electron microscopy to astronomical-scale in gravitational lensing. As envelopes of rays, optical caustics result in sharp edges or extended networks. Caustics in structured light, characterized by complex-amplitude distributions, have innovated numerous applications including particle manipulation, high-resolution imaging techniques, and optical communication. However, these applications have encountered limitations due to a major challenge in engineering caustic fields with customizable propagation trajectories and in-plane intensity profiles. Here, we introduce the compensation phase via 3D-printed metasurfaces to shape caustic fields with curved trajectories in free space. The in-plane caustic patterns can be preserved or morphed from one structure to another during propagation. Large-scale fabrication of these metasurfaces is enabled by the fast-prototyping and cost-effective two-photon polymerization lithography. Our optical elements with the ultra-thin profile and sub-millimeter extension offer a compact solution to generating caustic structured light for beam shaping, high-resolution microscopy, and light-matter-interaction studies. △ Less

Submitted 27 November, 2023; originally announced November 2023.

Acoustic Vortex in Waveguide with Chiral Gradient Sawtooth Metasurface

Authors: Zeliang Song, Shuhuan Xie, Yong Li, Hua Ding, Feiyan Cai, Yugui Peng, Xuefeng Zhu, Degang Zhao

Abstract: The acoustic vortex states with spiral phase dislocation that can carry orbital angular moment (OAM) have aroused many research interests in recent years. The mainstream methods of generating acoustic vortex are based on Huygens-Fresnel principle to modulate the wavefront to create spatial spiral phase dislocation. In this work, we propose an entirely new scenario to generate acoustic vortex in a… ▽ More The acoustic vortex states with spiral phase dislocation that can carry orbital angular moment (OAM) have aroused many research interests in recent years. The mainstream methods of generating acoustic vortex are based on Huygens-Fresnel principle to modulate the wavefront to create spatial spiral phase dislocation. In this work, we propose an entirely new scenario to generate acoustic vortex in a waveguide with chiral gradient sawtooth metasurface. The physical mechanism of our method is to lift the degenerate dipole eigenmodes through the scattering effect of the chiral surface structure, and then the superposition of them will generate both and order vortices in place. Compared to the existing methods of acoustic vortex production, our design has many merits, such as easy to manufacture and control, the working frequency is broadband, sign of vortex order can be readily flipped. Both the full-wave simulations and experimental measurements validate the existence of the acoustic vortices. The torque effect of the acoustic vortices is also successfully performed by rotating a foam disk as a practical application. Our work opens up a new route for generating acoustic vortex and could have potential significances in microfluidics, acoustic tweezers and ultrasonic communication, etc. △ Less

Submitted 14 January, 2024; v1 submitted 21 November, 2023; originally announced November 2023.

Cell nucleus elastography with the adjoint-based inverse solver

Authors: Yue Mei, Xuan Feng, Yun Jin, Rongyao Kang, Xinyu Wang, Dongmei Zhao, Soham Ghosh, Corey P Neu, Stephane Avril

Abstract: Background and Objectives: The mechanics of the nucleus depends on cellular structures and architecture, and impact a number of diseases. Nuclear mechanics is yet rather complex due to heterogeneous distribution of dense heterochromatin and loose euchromatin domains, giving rise to spatially variable stiffness properties. Methods: In this study, we propose to use the adjoint-based inverse solver t… ▽ More Background and Objectives: The mechanics of the nucleus depends on cellular structures and architecture, and impact a number of diseases. Nuclear mechanics is yet rather complex due to heterogeneous distribution of dense heterochromatin and loose euchromatin domains, giving rise to spatially variable stiffness properties. Methods: In this study, we propose to use the adjoint-based inverse solver to identify for the first time the nonhomogeneous elastic property distribution of the nucleus. Inputs of the inverse solver are deformation fields measured with microscopic imaging in contracting cardiomyocytes. Results: The feasibility of the proposed method is first demonstrated using simulated data. Results indicate accurate identification of the assumed heterochromatin region, with a maximum relative error of less than 5%. We also investigate the influence of unknown Poisson's ratio on the reconstruction and find that variations of the Poisson's ratio in the range [0.3-0.5] result in uncertainties of less than 15% in the identified stiffness. Finally, we apply the inverse solver on actual deformation fields acquired within the nuclei of two cardiomyocytes. The obtained results are in good agreement with the density maps obtained from microscopy images. Conclusions: Overall, the proposed approach shows great potential for nuclear elastography, with promising value for emerging fields of mechanobiology and mechanogenetics. △ Less

Submitted 28 September, 2023; originally announced September 2023.

Journal ref: Computer Methods and Programs in Biomedicine, In press

A Generalized Density Dissipation for Weakly-compressible SPH

Authors: Bo Xue Zheng, Zhi Wen Cai, Pei Dong Zhao, Xiao Yang Xu, Tak Shing Chan, Peng Yu

Abstract: The weakly compressible Smoothed Particle Hydrodynamics (SPH) is known to suffer from the pressure oscillation, which would undermine the simulation stability and accuracy. To address this issue, we propose a generalized density dissipation scheme suitable for both single-phase and multiphase flow simulations. Our approach consists of two components. Firstly, we replace the basic density dissipati… ▽ More The weakly compressible Smoothed Particle Hydrodynamics (SPH) is known to suffer from the pressure oscillation, which would undermine the simulation stability and accuracy. To address this issue, we propose a generalized density dissipation scheme suitable for both single-phase and multiphase flow simulations. Our approach consists of two components. Firstly, we replace the basic density dissipation with the density increment dissipation to enable numerical dissipation crossing the interfaces of different fluids in multiphase flow. Secondly, based on the dissipation volume conservation, we utilize dissipation volume correction factor (VCF) to stabilize the simulations for multiphase flows with large density ratio. We demonstrate the accuracy, stability, and robustness of our method through four three-dimensional benchmarks, i.e., the sloshing under external excitations, the single and double bubbles rising, Rayleigh-Taylor instability, and Kelvin Helmholtz instability. Additionally, our study reveals the relationship between SPH with the density dissipation and the approximate Riemann solver. △ Less

Submitted 29 August, 2023; originally announced August 2023.

Single channel based interference-free and self-powered human-machine interactive interface using eigenfrequency-dominant mechanism

Authors: Sen Ding, Dazhe Zhao, Yongyao Chen, Ziyi Dai, Qian Zhao, Yibo Gao, Junwen Zhong, Jianyi Luo, Bingpu Zhou

Abstract: The recent development of wearable devices is revolutionizing the way of human-machine interaction (HMI). Nowadays, an interactive interface that carries more embedded information is desired to fulfil the increasing demand in era of Internet of Things. However, present approach normally relies on sensor arrays for memory expansion, which inevitably brings the concern of wiring complexity, signal d… ▽ More The recent development of wearable devices is revolutionizing the way of human-machine interaction (HMI). Nowadays, an interactive interface that carries more embedded information is desired to fulfil the increasing demand in era of Internet of Things. However, present approach normally relies on sensor arrays for memory expansion, which inevitably brings the concern of wiring complexity, signal differentiation, power consumption, and miniaturization. Herein, a one-channel based self-powered HMI interface, which uses the eigenfrequency of magnetized micropillar (MMP) as identification mechanism, is reported. When manually vibrated, the inherent recovery of the MMP caused a damped oscillation that generates current signals because of Faraday's Law of induction. The time-to-frequency conversion explores the MMP-related eigenfrequency, which provides a specific solution to allocate diverse commands in an interference-free behavior even with one electric channel. A cylindrical cantilever model was built to regulate the MMP eigenfrequencies via precisely designing the dimensional parameters and material properties. We show that using one device and two electrodes, high-capacity HMI interface can be realized when the MMPs with different eigenfrequencies have been integrated. This study provides the reference value to design the future HMI system especially for situations that require a more intuitive and intelligent communication experience with high-memory demand. △ Less

Submitted 15 August, 2023; originally announced August 2023.

Comments: 35 pages, 6 figures

Measuring Scale-dependent Shape Anisotropy by Coarse-Graining: Application to Inhomogeneous Rayleigh-Taylor Turbulence

Authors: Dongxiao Zhao, Hussein Aluie

Abstract: We generalize the `filtering spectrum' [1] to probe scales along different directions by spatial coarse-graining. This multi-dimensional filtering spectrum quantifies the spectral content of flows that are not necessarily homogeneous. From multi-dimensional spectral information, we propose a simple metric for shape anisotropy at various scales. The method is applied to simulations of 2D and 3D Ray… ▽ More We generalize the `filtering spectrum' [1] to probe scales along different directions by spatial coarse-graining. This multi-dimensional filtering spectrum quantifies the spectral content of flows that are not necessarily homogeneous. From multi-dimensional spectral information, we propose a simple metric for shape anisotropy at various scales. The method is applied to simulations of 2D and 3D Rayleigh-Taylor (RT) turbulence, which is inhomogeneous and anisotropic. We show that 3D RT has clear shape anisotropy at large scales with approximately $4:3$ vertical to horizontal aspect ratio, but tends toward isotropy at small scales as expected [2,3,4]. In sharp contrast, we find that RT in 2D simulations, which are still the main modeling framework for many applications, is isotropic at large scales and its shape anisotropy increases at smaller scales where structures tend to be horizontally elongated. While this may be surprising, it is consistent with recent results in [5]; large-scale isotropy in 2D RT is due to the generation of a large-scale overturning circulation via an upscale cascade, while small scale anisotropy is due to the stable stratification resultant from such overturning and the inefficient mixing in 2D. △ Less

Submitted 18 October, 2023; v1 submitted 17 July, 2023; originally announced July 2023.

The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite

Authors: Z. X. Ling, X. J. Sun, C. Zhang, S. L. Sun, G. Jin, S. N. Zhang, X. F. Zhang, J. B. Chang, F. S. Chen, Y. F. Chen, Z. W. Cheng, W. Fu, Y. X. Han, H. Li, J. F. Li, Y. Li, Z. D. Li, P. R. Liu, Y. H. Lv, X. H. Ma, Y. J. Tang, C. B. Wang, R. J. Xie, Y. L. Xue, A. L. Yan , et al. (101 additional authors not shown)

Abstract: The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo… ▽ More The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Comments: Accepted by RAA

An entropy-controlled objective chip for reflective confocal microscopy with subdiffraction-limit resolution

Authors: Jun He, Dong Zhao, Hong Liu, Jinghua Teng, Cheng-Wei Qiu, Kun Huang

Abstract: Planar lenses with optimized but disordered structures can focus light beyond the diffraction limit. However, these disordered structures have inevitably destroyed wide-field imaging capability, limiting their applications in microscopy. Here we introduce information entropy S to evaluate the disorder of an objective chip by using the probability of its structural deviation from standard Fresnel z… ▽ More Planar lenses with optimized but disordered structures can focus light beyond the diffraction limit. However, these disordered structures have inevitably destroyed wide-field imaging capability, limiting their applications in microscopy. Here we introduce information entropy S to evaluate the disorder of an objective chip by using the probability of its structural deviation from standard Fresnel zone plates. Inspired by the theory of entropy change, we predict an equilibrium point S0=0.5 to balance wide-field imaging (theoretically evaluated by the Strehl ratio) and subdiffraction-limit focusing. To verify this, a NA=0.9 objective chip with a record-long focal length of 1 mm is designed with S=0.535, which is the nearest to the equilibrium point among all reported planar lenses. Consequently, our fabricated chip can focus light with subdiffraction-limit size of 0.44λ and image fine details with spatial frequencies up to 4000 lp/mm in experiment. These unprecedented performances enable ultracompact reflective confocal microscopy for superresolution imaging. △ Less

Submitted 20 March, 2023; originally announced March 2023.

Comments: 42 pages, 4 figures,

Message passing approach to analyze the robustness of hypergraph

Authors: Hao Peng, Cheng Qian, Dandan Zhao, Ming Zhong, Jianmin Han, Runchao Li, Wei Wang

Abstract: Hypergraph networks are closer to real life because they can reflect higher-order interactions, so researchers have begun using them to build models for real-world networks. The mean-field approach is the current tool for studying the percolation problem on hypergraph networks. However, we found that when there is a loop in the hypergraph network, the calculated results using this approach deviate… ▽ More Hypergraph networks are closer to real life because they can reflect higher-order interactions, so researchers have begun using them to build models for real-world networks. The mean-field approach is the current tool for studying the percolation problem on hypergraph networks. However, we found that when there is a loop in the hypergraph network, the calculated results using this approach deviate from the real results. Therefore, in this paper, we rephrase the percolation on the hypergraph network as a message passing process, thus obtaining a message passing approach. Our proposed approach has been tested in several hypergraph networks with loops, and the experimental results are more accurate than those under the mean-field approach. This is helpful to analyze and understand the robustness of hypergraph networks with loops. In addition, we also specifically analyzed how four different types of loops affect the accuracy of the experiment. Our proposed message passing approach also provides another way to study percolation on hypergraph networks. △ Less

Submitted 28 February, 2023; originally announced February 2023.

Comments: 13 pages, 6 figures

Development of a Laser-based angle-resolved-photoemission spectrometer with sub-micrometer spatial resolution and high-efficiency spin detection

Authors: R. Z. Xu, X. Gu, W. X. Zhao, J. S. Zhou, Q. Q. Zhang, X. Du, Y. D. Li, Y. H. Mao, D. Zhao, K. Huang, C. F. Zhang, F. Wang, Z. K. Liu, Y. L. Chen, L. X. Yang

Abstract: Angle-resolved photoemission spectroscopy with sub-micrometer spatial resolution (μ-ARPES), has become a powerful tool for studying quantum materials. To achieve sub-micrometer or even nanometer-scale spatial resolution, it is important to focus the incident light beam (usually from the synchrotron radiation) using X-ray optics such as the zone plate or ellipsoidal capillary mirrors. Recently, we… ▽ More Angle-resolved photoemission spectroscopy with sub-micrometer spatial resolution (μ-ARPES), has become a powerful tool for studying quantum materials. To achieve sub-micrometer or even nanometer-scale spatial resolution, it is important to focus the incident light beam (usually from the synchrotron radiation) using X-ray optics such as the zone plate or ellipsoidal capillary mirrors. Recently, we developed a laser-based μ-ARPES with spin-resolution (LMS-ARPES). The 177 nm laser beam is achieved by frequency doubling a 355 nm beam using a KBBF crystal and subsequently focused using an optical lens with a focal length of about 16 mm. By characterizing the focused spot size using different methods and performing spatial-scanning photoemission measurement, we confirm the sub-micron spatial resolution of the system. Compared with the μ-ARPES facilities based on synchrotron radiation, our LMS-ARPES system is not only more economical and convenient but also with higher photon flux (> 5E13 photons/s), thus enabling the high-resolution and high-statistics measurements. Moreover, the system is equipped with a two-dimensional spin detector based on exchange scattering at a surface-passivated iron film grown on a W(100) substrate. We investigate the spin structure of the prototype topological insulator Bi2Se3 and reveal a high spin-polarization rate, confirming its spin-momentum locking property. This lab-based LMS-ARPES will be a powerful research tool for studying the local fine electronic structures of different condensed matter systems, including topological quantum materials, mesoscopic materials and structures, and phase-separated materials. △ Less

Submitted 30 January, 2023; originally announced January 2023.

Comments: To appear in RSI

Investigation of the laser-induced lineshape change in attosecond transient absorption spectra by employing a time-dependent generalized Floquet approach

Authors: Di Zhao, Chen-Wei Jiang, Ai-Ping Fang, Shao-Yan Gao, Fu-li Li

Abstract: We introduce a time-dependent generalized Floquet (TDGF) approach to calculate attosecond transient absorption spectra of helium atoms subjected to the combination of an attosecond extreme ultraviolet (XUV) pulse and a delayed few-cycle infrared (IR) laser pulse. This TDGF approach provides a Floquet understanding of the laser-induced change of resonant absorption lineshape. It is analytically dem… ▽ More We introduce a time-dependent generalized Floquet (TDGF) approach to calculate attosecond transient absorption spectra of helium atoms subjected to the combination of an attosecond extreme ultraviolet (XUV) pulse and a delayed few-cycle infrared (IR) laser pulse. This TDGF approach provides a Floquet understanding of the laser-induced change of resonant absorption lineshape. It is analytically demonstrated that, the phase shift of the time-dependent dipole moment that results in the lineshape changes consists of the \emph{adiabatic} laser-induced phase (LIP) due to the IR-induced stark shifts of adiabatic Floquet states and the \emph{non-adiabatic} phase correction due to the non-adiabatic IR-induced coupling between adiabatic Floquet states. Comparisons of the spectral lineshape calculated based on the TDGF approach with the results obtained with the LIP model [S. Chen \emph{et al.}, Phys. Rev. A \textbf{88}, 033409(2013)] and the rotating-wave approximation (RWA) are made in several typical cases. It is suggested in the picture of adiabatic Floquet states that, the LIP model works as long as the generalized adiabatic theorem [A. Dodin \emph{et al.}, Phys. Rev. X Quantum \textbf{2}, 030302(2021)] fulfils, and the RWA works when the higher-order IR-coupling effect in the formation of adiabatic Floquet states is neglectable. △ Less

Submitted 16 January, 2023; originally announced January 2023.

Pixel super-resolution interference pattern sensing via the aliasing effect for laser frequency metrology

Authors: Lipeng Wan, Tianbao Yu, Daomu Zhao, Wolfgang Löffler

Abstract: The superposition of several optical beams with large mutual angles results in sub-micrometer periodic patterns with a complex intensity, phase and polarization structure. For high-resolution imaging thereof, one often employs optical super-resolution methods such as scanning nano-particle imaging. Here, we report that by using a conventional arrayed image sensor in combination with 2D Fourier ana… ▽ More The superposition of several optical beams with large mutual angles results in sub-micrometer periodic patterns with a complex intensity, phase and polarization structure. For high-resolution imaging thereof, one often employs optical super-resolution methods such as scanning nano-particle imaging. Here, we report that by using a conventional arrayed image sensor in combination with 2D Fourier analysis, the periodicities of light fields much smaller than the pixel size can be resolved in a simple and compact setup, with a resolution far beyond the Nyquist limit set by the pixel size. We demonstrate the ability to resolve periodicities with spatial frequencies of ~3/$μ$m, 15 times higher than the pixel sampling frequency of 0.188/$μ$m. This is possible by analyzing high-quality Fourier aliases in the first Brillouin zone. In order to obtain the absolute spatial frequencies of the interference patterns, we show that simple rotation of the image sensor is sufficient, which modulates the effective pixel size and allows determination of the original Brillouin zone. Based on this method, we demonstrate wavelength sensing with a resolving power beyond 100,000 without any special equipment △ Less

Submitted 19 December, 2022; originally announced December 2022.

Comments: 11 pages, 7 figures

Phase-probability shaping for speckle-free holographic lithography

Authors: Dong Zhao, Weiwei Fu, Ziqin Li, Jun He, Kun Huang

Abstract: Optical holography has undergone rapid development since its invention in 1948, but the accompanying speckles with randomly distributed intensity are still untamed now due to the fundamental difficulty of eliminating intrinsic fluctuations from irregular complex-field superposition. Despite spatial, temporal and spectral averages for speckle reduction, it is extremely challenging to reconstruct hi… ▽ More Optical holography has undergone rapid development since its invention in 1948, but the accompanying speckles with randomly distributed intensity are still untamed now due to the fundamental difficulty of eliminating intrinsic fluctuations from irregular complex-field superposition. Despite spatial, temporal and spectral averages for speckle reduction, it is extremely challenging to reconstruct high-homogeneity, edge-sharp and shape-unlimited images via holography. Here we predict that holographic speckles can be removed by narrowing the probability density distribution of encoded phase to homogenize optical superposition. Guided by this physical insight, a machine-learning-assisted probability-shaping (MAPS) method is developed to prohibit the fluctuations of intensity in a computer-generated hologram (CGH), which empowers the experimental reconstruction of irregular images with ultralow speckle contrast (C=0.08) and record-high edge sharpness (~1000 mm-1). It breaks the ultimate barrier of demonstrating high-end CGH lithography, thus enabling us to successfully pattern arbitrary-shape and edge-sharp structures such as vortex gratings and two-dimensional random barcodes. △ Less

Submitted 17 November, 2022; originally announced November 2022.

Comments: 4 figures

Revealing the role of tin fluoride additive in narrow bandgap Pb-Sn perovskites for highly efficient flexible all-perovskite tandem cells

Authors: Johnpaul K. Pious, Yannick Zwirner, Huagui Lai, Selina Olthof, Quentin Jeangros, Evgeniia Gilshtein, Radha K. Kothandaraman, Kerem Artuk, Philipp Wechsler, Cong Chen, Christian M. Wolff, Dewei Zhao, Ayodhya. N. Tiwari, Fan Fu

Abstract: Tin fluoride (SnF2) is an indispensable additive for high-efficiency Pb-Sn perovskite solar cells (PSCs). However, the spatial distribution of SnF2 in the perovskite absorber is seldom investigated while essential for a comprehensive understanding of the exact role of the SnF2 additive. Herein, we revealed the spatial distribution of SnF2 additive and made structure-optoelectronic properties-flexi… ▽ More Tin fluoride (SnF2) is an indispensable additive for high-efficiency Pb-Sn perovskite solar cells (PSCs). However, the spatial distribution of SnF2 in the perovskite absorber is seldom investigated while essential for a comprehensive understanding of the exact role of the SnF2 additive. Herein, we revealed the spatial distribution of SnF2 additive and made structure-optoelectronic properties-flexible photovoltaic performance correlation. We observed the chemical transformation of SnF2 to a fluorinated oxy-phase on the Pb-Sn perovskite film surface, due to its rapid oxidation. In addition, at the buried perovskite interface, we detected and visualized the accumulation of F- ions. We found that the photoluminescence quantum yield of Pb-Sn perovskite reached the highest value with 10 mol% SnF2 in the precursor solution. When integrating the optimized absorber in flexible devices, we obtained the flexible Pb-Sn perovskite narrow bandgap (1.24 eV) solar cells with an efficiency of 18.5% and demonstrated 23.1%-efficient flexible 4-terminal all-perovskite tandem cells. △ Less

Submitted 24 October, 2022; originally announced October 2022.

Traffic disruption modelling with mode shift in multi-modal networks

Authors: Dong Zhao, Adriana-Simona Mihaita, Yuming Ou, Sajjad Shafiei, Hanna Grzybowska, A. K. Qin, Gary Tan, Mo Li, Hussein Dia

Abstract: A multi-modal transport system is acknowledged to have robust failure tolerance and can effectively relieve urban congestion issues. However, estimating the impact of disruptions across multi-transport modes is a challenging problem due to a dis-aggregated modelling approach applied to only individual modes at a time. To fill this gap, this paper proposes a new integrated modelling framework for a… ▽ More A multi-modal transport system is acknowledged to have robust failure tolerance and can effectively relieve urban congestion issues. However, estimating the impact of disruptions across multi-transport modes is a challenging problem due to a dis-aggregated modelling approach applied to only individual modes at a time. To fill this gap, this paper proposes a new integrated modelling framework for a multi-modal traffic state estimation and evaluation of the disruption impact across all modes under various traffic conditions. First, we propose an iterative trip assignment model to elucidate the association between travel demand and travel behaviour, including a multi-modal origin-to-destination estimation for private and public transport. Secondly, we provide a practical multi-modal travel demand re-adjustment that takes the mode shift of the affected travellers into consideration. The pros and cons of the mode shift strategy are showcased via several scenario-based transport simulating experiments. The results show that a well-balanced mode shift with flexible routing and early announcements of detours so that travellers can plan ahead can significantly benefit all travellers by a delay time reduction of 46%, while a stable route assignment maintains a higher average traffic flow and the inactive mode-route choice help relief density under the traffic disruptions. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Comments: 8 pages, 7 figures, 1 table, The 25th IEEE International Conference on Intelligent Transportation Systems (IEEE ITSC 2022)

Effective Drift Velocity from Turbulent Transport by Vorticity

Authors: Hussein Aluie, Shikhar Rai, Hao Yin, Aarne Lees, Dongxiao Zhao, Stephen M. Griffes, Alistar Adcroft, Jessica K. Shang

Abstract: We highlight the differing roles of vorticity and strain in the transport of coarse-grained scalars at length-scales larger than $\ell$ by smaller scale (subscale) turbulence. %subscale flux/stress which appear in the evolution of coarse-grained (resolved) scalars/momentum account for the effect of (subgrid) scales smaller than the coarse-graining length $\ell$. We use the first term in a multisca… ▽ More We highlight the differing roles of vorticity and strain in the transport of coarse-grained scalars at length-scales larger than $\ell$ by smaller scale (subscale) turbulence. %subscale flux/stress which appear in the evolution of coarse-grained (resolved) scalars/momentum account for the effect of (subgrid) scales smaller than the coarse-graining length $\ell$. We use the first term in a multiscale gradient expansion due to Eyink \cite{Eyink06a}, which exhibits excellent correlation with the exact subscale physics when the partitioning length $\ell$ is any scale smaller than that of the spectral peak. We show that unlike subscale strain, which acts as an anisotropic diffusion/anti-diffusion tensor, subscale vorticity's contribution is solely a conservative advection of coarse-grained quantities by an eddy-induced non-divergent velocity, $\bv_*$, that is proportional to the curl of vorticity. Therefore, material (Lagrangian) advection of coarse-grained quantities is accomplished not by the coarse-grained flow velocity, $\OL\bu_\ell$, but by the effective velocity, $\OL\bu_\ell+\bv_*$, the physics of which may improve commonly used LES models. △ Less

Submitted 6 September, 2022; originally announced September 2022.

From Static to Dynamic Structures: Improving Binding Affinity Prediction with Graph-Based Deep Learning

Authors: Yaosen Min, Ye Wei, Peizhuo Wang, Xiaoting Wang, Han Li, Nian Wu, Stefan Bauer, Shuxin Zheng, Yu Shi, Yingheng Wang, Ji Wu, Dan Zhao, Jianyang Zeng

Abstract: Accurate prediction of protein-ligand binding affinities is an essential challenge in structure-based drug design. Despite recent advances in data-driven methods for affinity prediction, their accuracy is still limited, partially because they only take advantage of static crystal structures while the actual binding affinities are generally determined by the thermodynamic ensembles between proteins… ▽ More Accurate prediction of protein-ligand binding affinities is an essential challenge in structure-based drug design. Despite recent advances in data-driven methods for affinity prediction, their accuracy is still limited, partially because they only take advantage of static crystal structures while the actual binding affinities are generally determined by the thermodynamic ensembles between proteins and ligands. One effective way to approximate such a thermodynamic ensemble is to use molecular dynamics (MD) simulation. Here, an MD dataset containing 3,218 different protein-ligand complexes is curated, and Dynaformer, a graph-based deep learning model is further developed to predict the binding affinities by learning the geometric characteristics of the protein-ligand interactions from the MD trajectories. In silico experiments demonstrated that the model exhibits state-of-the-art scoring and ranking power on the CASF-2016 benchmark dataset, outperforming the methods hitherto reported. Moreover, in a virtual screening on heat shock protein 90 (HSP90) using Dynaformer, 20 candidates are identified and their binding affinities are further experimentally validated. Dynaformer displayed promising results in virtual drug screening, revealing 12 hit compounds (two are in the submicromolar range), including several novel scaffolds. Overall, these results demonstrated that the approach offer a promising avenue for accelerating the early drug discovery process. △ Less

Submitted 2 September, 2024; v1 submitted 19 August, 2022; originally announced August 2022.

Comments: Update the content according to the published version on Advanced Science (https://doi.org/10.1002/advs.202405404)

Type of Non-reciprocity in Fiber Sagnac Interferometer Induced by Geometric Phases

Authors: Dongzi Zhao, Jing-Zheng Huang, Tailong Xiao, Hongjing Li, Xiaoyan Wu, Guihua Zeng

Abstract: The non-reciprocity of Sagnac interferometer provides ultra-high sensitivity for parameter estimation and offers a wide range of applications, especially for optical fiber sensing. In this work, we study a new type of non-reciprocity existed in optical fiber Sagnac interferometer where the polarization dependent loss is taken into consideration. In particular, this non-reciprocity is irrelevant to… ▽ More The non-reciprocity of Sagnac interferometer provides ultra-high sensitivity for parameter estimation and offers a wide range of applications, especially for optical fiber sensing. In this work, we study a new type of non-reciprocity existed in optical fiber Sagnac interferometer where the polarization dependent loss is taken into consideration. In particular, this non-reciprocity is irrelevant to the physical effects that being considered in previous studies, which originates from the geometric phases induced by continuous-weak-measurement. In consequence, it has a unique phenomenon of sudden phase transition, which may open a new way for the future design of high precision optical fiber sensors. △ Less

Submitted 28 July, 2022; v1 submitted 27 July, 2022; originally announced July 2022.

Comments: 10 pages, 11 figures. The wrong author list in v1 has been corrected

High-Performance Flexible All-Perovskite Tandem Solar Cells with Reduced VOC-Deficit in Wide-Bandgap Subcell

Authors: Huagui Lai, Jincheng Luo, Yannick Zwirner, Selina Olthof, Alexander Wieczorek, Fangyuan Ye, Quentin Jeangros, Xinxing Yin, Fatima Akhundova, Tianshu Ma, Rui He, Radha K. Kothandaraman, Xinyu Chin, Evgeniia Gilshtein, André Müller, Changlei Wang, Jarla Thiesbrummel, Sebastian Siol, José Márquez Prieto, Thomas Unold, Martin Stolterfoht, Cong Chen, Ayodhya N. Tiwari, Dewei Zhao, Fan Fu

Abstract: Among various types of perovskite-based tandem solar cells (TSCs), all-perovskite TSCs are of particular attractiveness for building- and vehicle-integrated photovoltaics, or space energy areas as they can be fabricated on flexible and lightweight substrates with a very high power-to-weight ratio. However, the efficiency of flexible all-perovskite tandems is lagging far behind their rigid counterp… ▽ More Among various types of perovskite-based tandem solar cells (TSCs), all-perovskite TSCs are of particular attractiveness for building- and vehicle-integrated photovoltaics, or space energy areas as they can be fabricated on flexible and lightweight substrates with a very high power-to-weight ratio. However, the efficiency of flexible all-perovskite tandems is lagging far behind their rigid counterparts primarily due to the challenges in developing efficient wide-bandgap (WBG) perovskite solar cells on the flexible substrates as well as the low open-circuit voltage (VOC) in the WBG perovskite subcell. Here, we report that the use of self-assembled monolayers as hole-selective contact effectively suppresses the interfacial recombination and allows the subsequent uniform growth of a 1.77 eV WBG perovskite with superior optoelectronic quality. In addition, we employ a post-deposition treatment with 2-thiopheneethylammonium chloride to further suppress the bulk and interfacial recombination, boosting the VOC of the WBG top cell to 1.29 V. Based on this, we present the first proof-of-concept four-terminal all-perovskite flexible TSC with a PCE of 22.6%. When integrating into two-terminal flexible tandems, we achieved 23.8% flexible all-perovskite TSCs with a superior VOC of 2.1 V, which is on par with the VOC reported on the 28% all-perovskite tandems grown on the rigid substrate. △ Less

Submitted 25 July, 2022; originally announced July 2022.

KPGT: Knowledge-Guided Pre-training of Graph Transformer for Molecular Property Prediction

Authors: Han Li, Dan Zhao, Jianyang Zeng

Abstract: Designing accurate deep learning models for molecular property prediction plays an increasingly essential role in drug and material discovery. Recently, due to the scarcity of labeled molecules, self-supervised learning methods for learning generalizable and transferable representations of molecular graphs have attracted lots of attention. In this paper, we argue that there exist two major issues… ▽ More Designing accurate deep learning models for molecular property prediction plays an increasingly essential role in drug and material discovery. Recently, due to the scarcity of labeled molecules, self-supervised learning methods for learning generalizable and transferable representations of molecular graphs have attracted lots of attention. In this paper, we argue that there exist two major issues hindering current self-supervised learning methods from obtaining desired performance on molecular property prediction, that is, the ill-defined pre-training tasks and the limited model capacity. To this end, we introduce Knowledge-guided Pre-training of Graph Transformer (KPGT), a novel self-supervised learning framework for molecular graph representation learning, to alleviate the aforementioned issues and improve the performance on the downstream molecular property prediction tasks. More specifically, we first introduce a high-capacity model, named Line Graph Transformer (LiGhT), which emphasizes the importance of chemical bonds and is mainly designed to model the structural information of molecular graphs. Then, a knowledge-guided pre-training strategy is proposed to exploit the additional knowledge of molecules to guide the model to capture the abundant structural and semantic information from large-scale unlabeled molecular graphs. Extensive computational tests demonstrated that KPGT can offer superior performance over current state-of-the-art methods on several molecular property prediction tasks. △ Less

Submitted 2 June, 2022; originally announced June 2022.

Comments: 11 pages, to appear in KDD 2022 research track

Plug-Play Plasmonic Metafibers for Ultrafast Fiber Lasers

Authors: Lei Zhang, Huiru Zhang, Ni Tang, Xiren Chen, Fengjiang Liu, Xiaoyu Sun, Hongyan Yu, Xinyu Sun, Qiannan Jia, Boqu Chen, Benoit Cluzel, Philippe Grelu, Aurelien Coillet, Feng Qiu, Lei Ying, Wei Sha, Xiaofeng Liu, Jianrong Qiu, Ding Zhao, Wei Yan, Duanduan Wu, Xiang Shen, Jiyong Wang, Min Qiu

Abstract: Metafibers expand the functionalities of conventional optical fibers to unprecedented nanoscale light manipulations by integrating metasurfaces on the fiber tips, becoming an emerging light-coupling platform for both nanoscience and fiber optics communities. Mostly exploring the isolated bare fibers, current metafibers remain as proof-of-concept demonstrations due to a lack of standard interfaces… ▽ More Metafibers expand the functionalities of conventional optical fibers to unprecedented nanoscale light manipulations by integrating metasurfaces on the fiber tips, becoming an emerging light-coupling platform for both nanoscience and fiber optics communities. Mostly exploring the isolated bare fibers, current metafibers remain as proof-of-concept demonstrations due to a lack of standard interfaces with the universal fiber networks. Here, we develop new methodologies to fabricate well-defined plasmonic metasurfaces directly on the end facets of commercial single mode fiber jumpers using standard planar technologies and provide a first demonstration of their practical applications in the nonlinear optics regime. Featuring plug-play connections with fiber circuitry and arbitrary metasurfaces landscapes, the metafibers with tunable plasmonic resonances are implemented into fiber laser cavities, yielding all-fiber sub-picosecond (minimum 513 fs) soliton mode locked lasers at optical wavelengths of 1.5 micrometer and 2 micrometer, demonstrating their unusual polarimetric nonlinear transfer functions and superior saturation absorption responses. Novel insights into the physical mechanisms behind the saturable absorption of plasmonic metasurfaces are provided. The nanofabrication process flow is compatible with existing cleanroom technologies, offering metafibers an avenue to be a regular member of functionalized fiber components. The work paves the way towards next generation of ultrafast fiber lasers, optical frequency combs, optical neural networks and ultracompact "all-in-fibers" optical systems for sensing, imaging, communications, and many others. △ Less

Submitted 28 September, 2022; v1 submitted 11 January, 2022; originally announced January 2022.

Comments: 27 pages, 15 figures

A Stochastic Heat Engine Based on Prandtl-Tomlinson Model

Authors: Dongyang Zhao

Abstract: Stick-slip is a ubiquitous phenomenon in many scientific fields, such as earthquake and glacier dynamics, acoustics, cell biology, interface science and tribology. As a fundamental mechanism of energy dissipation in nanofriction, it can be interpreted by the Prandtl-Tomlinson (PT) model. In this paper we will show that aided by a specifically designed temperature field, stick-slip can be used to e… ▽ More Stick-slip is a ubiquitous phenomenon in many scientific fields, such as earthquake and glacier dynamics, acoustics, cell biology, interface science and tribology. As a fundamental mechanism of energy dissipation in nanofriction, it can be interpreted by the Prandtl-Tomlinson (PT) model. In this paper we will show that aided by a specifically designed temperature field, stick-slip can be used to extract energy from the environment, i.e. forming a stochastic heat engine based on PT model (PTSHE). Utilizing Langevin dynamics simulation and the framework of stochastic thermodynamics, two mechanisms of work output, i.e. the potential mechanism and the thermolubricity mechanism, are distinguished. An approximate mean cycle work output limit based on the former one is derived, reminiscent of Carnot's limit. The latter one can make the mean cycle work output limit larger than that predicted by the former one while the excess of it can also lead to work output reduction. The mean cycle work curves with respect to the driving velocity is characteristic of PT model in both the PTSHE and nanofriction. The nonlinear bifurcation in zero temperature and the stochastic resonance in finite temperature of the PT model are analyzed preliminarily. With the corrugation number of the PT model increasing, the mean cycle work output limit first increases and then decreases. Besides stick-slip nanofriction and the PTSHE, the PT model is a promising system for studying nonlinear double- or multiple-well dynamics and is valuable to be explored further both theoretically and experimentally. △ Less

Submitted 27 December, 2021; v1 submitted 23 December, 2021; originally announced December 2021.

Comments: 93 pages, 74 figures, 6 tables. In version 2 submitted on 27 Dec 2021, Fig. 4, Fig. 7 and Fig. S54 are replaced and the abstract is modified. Fine adjustment of some figures and correction of some typos are made

Topological interface states induced by incident angle in the 1D elastic wave system

Authors: Pan Li, Wenping Hu, Pai Peng, Xuefeng Zhu, Degang Zhao

Abstract: Topological interface states are currently attracting rapidly growing attention in classical wave systems. However, little work has been done on topological interface states in one-dimensional (1D) elastic wave systems, especially in the case of oblique incidence. This paper theoretically demonstrates the realization of topological interface states of elastic waves in a 1D composite plate structur… ▽ More Topological interface states are currently attracting rapidly growing attention in classical wave systems. However, little work has been done on topological interface states in one-dimensional (1D) elastic wave systems, especially in the case of oblique incidence. This paper theoretically demonstrates the realization of topological interface states of elastic waves in a 1D composite plate structure composed of two phononic crystals (PCs) with different topological characteristics, which can be regulated by the incident angle. For the out-of-plane SH mode, multiple topological interface states can coexist in different common bandgaps. For the in-plane complex P-SV coupled mode, topological interface states can exist in both "partial-polarization" and "omni-polarization" bandgaps. All these interface states are in the wide frequency and incident angle regions. We also discuss the polarization and the mode conversion of the interface states. Our results provide an innovative method to excite and tune topologically protected interface states for elastic waves, which may have potential applications in obtaining strong local vibration for different polarized elastic wave modes. △ Less

Submitted 22 November, 2021; v1 submitted 5 November, 2021; originally announced November 2021.

Journal ref: International Journal of Mechanical Sciences 225 (2022) 107359

A SVD-Based Synchrophasor Estimator for P-class PMUs with Improved Immune from Interharmonic Tones

Authors: Dongfang Zhao, Fuping Wang, Shisong Li, Lei Chen, Wei Zhao, Songling Huang

Abstract: The increasing use of renewable generation, power electronic devices, and nonlinear loads in power systems brings more severe interharmonic tones to the measurand, which can increase estimation errors of P-class PMUs, cause misoperation of protection relays, and even threaten the stability of the power systems. Therefore, the performance of the P-class synchrophasor estimator under interharmonic i… ▽ More The increasing use of renewable generation, power electronic devices, and nonlinear loads in power systems brings more severe interharmonic tones to the measurand, which can increase estimation errors of P-class PMUs, cause misoperation of protection relays, and even threaten the stability of the power systems. Therefore, the performance of the P-class synchrophasor estimator under interharmonic interference should be evaluated and new estimation schemes that can improve the operational robustness are needed for various protection and control applications. In this paper, a synchrophasor estimator design for P-class PMUs that introduces singular value decomposition to the least square algorithm based on the Taylor series is proposed. By constructing an optimization with proposed adjustable parameters, finite impulse response filters with high transition band attenuation are designed. Numerical and experimental tests verify the proposed dynamic synchrophasor estimator performance and show an effective improvement in rejecting interharmonic tones, especially when a short time window and light computational burden are required. △ Less

Submitted 19 October, 2021; originally announced October 2021.

Comments: 10 pages, 10 figures, submitted to IEEE Access

Measurement of n-resolved State-Selective Charge Exchange in Ne(8,9)+ Collision with He and H2

Authors: J. W. Xu, C. X. Xu, R. T. Zhang, X. L. Zhu, W. T. Feng, L. Gu, G. Y. Liang, D. L. Guo, Y. Gao, D. M. Zhao, S. F. Zhang, M. G. Su, X. Ma

Abstract: Charge exchange between highly charged ions and neutral atoms and molecules has been considered as one of the important mechanisms controlling soft X ray emissions in many astrophysical objects and environments. However, for modeling charge exchange soft X ray emission, the data of n and l resolved state selective capture cross sections are often obtained by empirical and semiclassical theory calc… ▽ More Charge exchange between highly charged ions and neutral atoms and molecules has been considered as one of the important mechanisms controlling soft X ray emissions in many astrophysical objects and environments. However, for modeling charge exchange soft X ray emission, the data of n and l resolved state selective capture cross sections are often obtained by empirical and semiclassical theory calculations. With a newly built cold target recoil ion momentum spectroscopy (COLTRIMS) apparatus, we perform a series of measurements of the charge exchange of Ne(8,9)+ ions with He and H2 for collision energy ranging from 1 to 24.75 keV/u. n resolved state selective capture cross-sections are reported. By comparing the measured state selective capture cross sections to those calculated by the multichannel Landau Zener method (MCLZ), it is found that MCLZ calculations are in good agreement with the measurement for the dominant n capture for He target. Furthermore, by using nl resolved cross sections calculated by MCLZ and applying l distributions commonly used in the astrophysical literature to experimentally derived n resolved cross sections, we calculate the soft X ray emissions in the charge exchange between 4 keV/u Ne8+ and He by considering the radiative cascade from the excited Ne7+ ions. Reasonable agreement is found in comparison to the measurement for even and separable models, and MCLZ calculations give results in a better agreement. △ Less

Submitted 10 May, 2021; originally announced May 2021.

Journal ref: The Astrophysical Journal Supplement Series,2021 vol 253. P13

Fabrication-aware Design for Furniture with Planar Pieces

Authors: Wenzhong Yan, Dawei Zhao, Ankur Mehta

Abstract: We propose a computational design tool to enable casual end-users to easily design, fabricate, and assemble flat-pack furniture with guaranteed manufacturability. Using our system, users select parameterized components from a library and constrain their dimensions. Then they abstractly specify connections among components to define the furniture. Once fabrication specifications (e.g. materials) de… ▽ More We propose a computational design tool to enable casual end-users to easily design, fabricate, and assemble flat-pack furniture with guaranteed manufacturability. Using our system, users select parameterized components from a library and constrain their dimensions. Then they abstractly specify connections among components to define the furniture. Once fabrication specifications (e.g. materials) designated, the mechanical implementation of the furniture is automatically handled by leveraging encoded domain expertise. Afterwards, the system outputs 3D models for visualization and mechanical drawings for fabrication. We demonstrate the validity of our approach by designing, fabricating, and assembling a variety of flat-pack (scaled) furniture on demand. △ Less

Submitted 11 April, 2021; originally announced April 2021.

Comments: 21 pages, 14 figures, submitted to Robotica

Journal ref: Robotica, 2022

Ionic thermoelectric materials and devices

Authors: Dan Zhao, Alois Würger, Xavier Crispin

Abstract: The tremendous amount of wasted heat from solar radiation and industry dissipation has motivated the development of thermoelectric concepts that directly convert heat into electricity. The main challenge in practical applications for thermoelectrics is the high cost from both materials and manufacturing. Recently, breakthrough progresses in ionic thermoelectrics open up new possibilities to charge… ▽ More The tremendous amount of wasted heat from solar radiation and industry dissipation has motivated the development of thermoelectric concepts that directly convert heat into electricity. The main challenge in practical applications for thermoelectrics is the high cost from both materials and manufacturing. Recently, breakthrough progresses in ionic thermoelectrics open up new possibilities to charge energy storage devices when submitted to a temperature gradient. The charging voltage is internally from the ionic Seebeck effect of the electrolyte between two electrodes. Hence electrolytes with high thermoelectric figure of merit are classified as ionic thermoelectric materials. Most ionic thermoelectric materials are composed of abundant elements, and they can generate hundreds of times larger thermal voltage than that of electronic materials. This emerging thermoelectric category brings new hope to fabricate low cost and large area heat-to-energy conversion devices, and triggers a renewed interest for ionic thermodiffusion. In this review, we summarize the state of the art in the new field of ionic thermoelectrics, from the driving force of the ionic thermodiffusion to material and application developments. We present a general map of ionic thermoelectric materials, discuss the unique characters of each type of the reported electrolytes, and propose potential optimization and future topics of ionic thermoelectrics. △ Less

Submitted 8 March, 2021; originally announced March 2021.

Comments: 32 pages, 13 figures

Journal ref: Journal of Energy Chemistry (2021)

Scale interactions and anisotropy in Rayleigh-Taylor turbulence

Authors: Dongxiao Zhao, Riccardo Betti, Hussein Aluie

Abstract: We study energy scale-transfer in Rayleigh-Taylor (RT) flows by coarse-graining in physical space without Fourier transforms, allowing scale analysis along vertical direction. Two processes are responsible for kinetic energy flux across scales: baropycnal work $Λ$, due to large-scale pressure gradients acting on small-scales of density and velocity, and deformation work $Π$, due to multi-scale vel… ▽ More We study energy scale-transfer in Rayleigh-Taylor (RT) flows by coarse-graining in physical space without Fourier transforms, allowing scale analysis along vertical direction. Two processes are responsible for kinetic energy flux across scales: baropycnal work $Λ$, due to large-scale pressure gradients acting on small-scales of density and velocity, and deformation work $Π$, due to multi-scale velocity. Our coarse-graining analysis shows how these fluxes exhibit self-similar evolution that is quadratic-in-time, similar to RT mixing layer. We find that $Λ$ is a conduit for potential energy, transferring energy non-locally from the largest scales to smaller scales in the inertial range where $Π$ takes over. In 3D, $Π$ continues a persistent cascade to smaller scales, whereas in 2D $Π$ re-channels the energy back to larger scales despite the lack of vorticity conservation in 2D variable density flows. This gives rise to a positive feedback loop in 2D-RT (absent in 3D) in which mixing layer growth and the associated potential energy release are enhanced relative to 3D, explaining the oft-observed larger $α$ values in 2D simulations. Despite higher bulk kinetic energy levels in 2D, small inertial scales are weaker than in 3D. Moreover, the net upscale cascade in 2D tends to isotropize the large-scale flow, in stark contrast to 3D. Our findings indicate the absence of net upscale energy transfer in 3D-RT as is often claimed; growth of large-scale bubbles and spikes is not due to "mergers" but solely due to baropycnal work $Λ$. △ Less

Submitted 23 November, 2021; v1 submitted 7 June, 2020; originally announced June 2020.

4DFlowNet: Super-Resolution 4D Flow MRI using Deep Learning and Computational Fluid Dynamics

Authors: Edward Ferdian, Avan Suinesiaputra, David Dubowitz, Debbie Zhao, Alan Wang, Brett Cowan, Alistair Young

Abstract: 4D-flow magnetic resonance imaging (MRI) is an emerging imaging technique where spatiotemporal 3D blood velocity can be captured with full volumetric coverage in a single non-invasive examination. This enables qualitative and quantitative analysis of hemodynamic flow parameters of the heart and great vessels. An increase in the image resolution would provide more accuracy and allow better assessme… ▽ More 4D-flow magnetic resonance imaging (MRI) is an emerging imaging technique where spatiotemporal 3D blood velocity can be captured with full volumetric coverage in a single non-invasive examination. This enables qualitative and quantitative analysis of hemodynamic flow parameters of the heart and great vessels. An increase in the image resolution would provide more accuracy and allow better assessment of the blood flow, especially for patients with abnormal flows. However, this must be balanced with increasing imaging time. The recent success of deep learning in generating super resolution images shows promise for implementation in medical images. We utilized computational fluid dynamics simulations to generate fluid flow simulations and represent them as synthetic 4D flow MRI data. We built our training dataset to mimic actual 4D flow MRI data with its corresponding noise distribution. Our novel 4DFlowNet network was trained on this synthetic 4D flow data and was capable in producing noise-free super resolution 4D flow phase images with upsample factor of 2. We also tested the 4DFlowNet in actual 4D flow MR images of a phantom and normal volunteer data, and demonstrated comparable results with the actual flow rate measurements giving an absolute relative error of 0.6 to 5.8% and 1.1 to 3.8% in the phantom data and normal volunteer data, respectively. △ Less

Submitted 15 April, 2020; originally announced April 2020.

Comments: accepted to Frontiers in Cardiovascular Medicine